Table of contents risk management report - Pickles

Table of contents risk management report - Pickles

Owner Pickles Auctions Perth Created By Brendan Everingham Date 31-Jul-2018 TYPE EWP - Boom MAKE Isuzu MODEL FVZ 1400 6x4 CHASSIS / VIN JALFVZ13LJ3600022 Report Number PA 20180731-1722 Assessment Purpose Sale State WA TABLE OF CONTENTS IMPORTANT INFORMATION Contains information outlining the scope and any limitations applicable to this Risk Management Report MACHINE DETAILS Contains standard machine specifications and details of any extras fitted RISK ANALYSIS, RISK EVALUATION & RISK TREATMENT Contains details of the technique used to calculate risk ratings, time frame and risk treatments. Please refer to this information when reviewing and interpreting the information in section 4 & 5 RISK TREATMENTS REQUIRED Contains detailed information regarding the risk treatments to be implemented including hazard, risk rating, time frame, relevant standards & legislative references RISK TREATMENTS IN PLACE Contains detailed information regarding the risk treatments in place including hazard, risk rating, relevant standards & legislative references IMAGES AND NOTES Contains images & any relevant information entered by the assessor Assist. Assessor(s) SECTION 1 SECTION 2 SECTION 3 SECTION 4 SECTION 5 SECTION 6 Assessor Brendan Everingham RISK MANAGEMENT REPORT 34 33 3 27 2 1 Lot Number 26091857 Page 1 of 16 Assessed By Brendan Everingham Model FVZ 1400 6x4 Make Isuzu Type EWP - Boom Date 31-Jul-2018 Chassis / VIN JALFVZ13LJ3600022

SECTION 2 MACHINE DETAILS This Risk Management Report has been prepared for - _ _ (insert recipient name/company name) This document has been prepared to cover the sale or transfer of this item of plant between the Company identified on the front cover and their named recipient. This report must not be used for any subsequent sale or transfer. This document is provided to meet duty of care obligations as set out in relevant state and territory health and safety regulations for the supply of plant and the sale and transfer of plant.

The safety hazards associated with the operating and maintaining of this item of plant have been identified as far as practical by visual inspection. This item of plant is being sold in an "as-is" condition with known and unknown safety hazards. No physical testing has been conducted (eg. Wire rope tests, stress tests, structural/non-destructive tests, noise tests, vibration tests, brake tests, insulation tests etc.) unless stated otherwise in the notes. This document is not intended to provide information on, nor warrant the mechanical, electrical or structural condition of this item of plant. Any information on standard features have been supplied through the manufacturer and should be used as a guide only until otherwise verified. This item of plant should be further assessed, tested and inspected or dismantled as necessary to gauge any further hazards and /or risks relating to SPECIFIC WORKPLACE USE, which are currently unknown, in accordance with relevant standards, regulations and acts. Under common law and relevant state and territory health and safety acts, regulations and codes of practice, there is a requirement for the plant owner, employer and operator to exercise a duty of care in the safe operation and maintenance of plant. Accordingly before this item of plant is supplied to, or used at any workplace it must be inspected to ensure it is in a fully operational , safe and serviceable condition and that operators and maintenance personnel are appropriately trained in the use & maintenance of this item of plant.

For further information regarding this report contact Online Safety Systems on 1300 72 88 52 IMPORTANT INFORMATION SECTION 1 This report generated by Plant Assessor™ © Online Safety Systems on Wednesday 1 Aug 2018 7:00 PM - DESIGN Design Registration Number Plant Registration number Statutory Plant Registration number - NOISE TEST RESULTS 1. Manufacturers specified noise level dBA 2. Ambient noise level dBA 3. Noise level - Operator position (high idle) dBA 4. Noise level - Operator position (low idle) dBA 5. Noise level LHS dBA @ m (high idle) 6. Noise level Front dBA @ m (high idle) 7. Noise level RHS dBA @ m (high idle) 8. Noise level Rear dBA @ m (high idle) CAPACITIES Fuel Tank Capacity (Litres) Lift Capacity (kg) Lift Height (mm/feet) DIMENSIONS/WEIGHTS Dry Weight (kg) Max Operating Weight (kg) Transport height (mm) Transport length (mm) Transport Width (mm) ENGINE Engine Displacement (Ltr) Engine Make & Model Page 2 of 16 Assessed By Brendan Everingham Model FVZ 1400 6x4 Make Isuzu Type EWP - Boom Date 31-Jul-2018 Chassis / VIN JALFVZ13LJ3600022

ENGINE Engine Number Engine Petrol/Diesel Engine Power (kW@rpm) Number of Cylinders EWP EWP compliance expiry date EWP make EWP manufacture date EWP model HOURS Odometer RETAIL $ New Price New Price Date TRANSMISSION Transmission TYRES Standard Front Tyre Size Standard Rear Tyre Size EXTRAS Air Conditioning Storage/Tool boxes Page 3 of 16 Assessed By Brendan Everingham Model FVZ 1400 6x4 Make Isuzu Type EWP - Boom Date 31-Jul-2018 Chassis / VIN JALFVZ13LJ3600022

SECTION 3 RISK ANALYSIS / RISK EVALUATION Page 4 of 16 Assessed By Brendan Everingham Model FVZ 1400 6x4 Make Isuzu Type EWP - Boom Date 31-Jul-2018 Chassis / VIN JALFVZ13LJ3600022

SECTION 4 RISK TREATMENTS REQUIRED This section of the report pertains to hazards created by use of this item of plant which currently do not have risk treatments in place. The risk treatments recommended in this section have been developed based on relevant Australian Standards, health & safety legislation, the hierarchy of risk treatment in accordance with the guidelines set forth in AS/NZS ISO 31000 – Risk Management and various other sources. The recommended risk treatment measures must be developed, implemented and validated as effective prior to the operation, maintenance or testing of this item of plant. Treatments applied must be dated and initialled adjacent the recommendations. All operators must read and understand the entire contents of this section prior to operating this item of plant.

HAZARD(S) Prelim. Risk Rating Residual Risk Rating Time Frame Due Date Date Rectified Initial CRUSHING Ensure that the components of the platform supporting structure fitted to this item of plant are fully functional and free from excessive wear and damage. Once achieved ensure that these criteria are met at all times whilst this item of plant is in operation. Immediate References: AS/NZS1418.10 31-Jul-18 CRITICAL 24 Risk Treatment Required: Pins, connectors & pivot points MEDIUM 15 INCORRECT OPERATION Only persons who are qualified, trained and experienced and/or hold the relevant certification/license can operate this item of plant. If there is not a competent/licensed person available for operation of this item of plant then only persons who are supervised by a competent/licensed person can operate this item of plant.

Legislation: State Health & Safety Legislation & Regulation Immediate References: Work Health & Safety Act & Regulations- 31-Jul-18 CRITICAL 24 Risk Treatment Required: Operator Competency MEDIUM 15 TIP OVER This item of plant is fitted with power operated stabilisers. The controls must be interlocked to prevent the elevating work platform from being elevated until the stabilisers are within the manufacturers specification and conversely that the stabilisers cannot be retracted until the elevated work platform is fully lowered or rettracted. Once fitted these interlocks must be fully functional at all times whilst this item of plant is on operation. Immediate References: AS/NZS1418.10 31-Jul-18 CRITICAL 24 Risk Treatment Required: Stabiliser Interlock MEDIUM 15 ELECTROCUTION Attach a clear hazard warning label re: overhead electrical hazards and minimum approach distances adjacent operator work areas and any access to the top of the item of plant. These distances must be adhered to strictly. Once fitted these labels and tables must be present, clear and legible at all times. Spotters are required when working within 5 metres of the minimum approach distance of any live electrical apparatus. Any encroach within the minimum approach distances must only occur if the following provisions have been met - 1. The machine is designed to work within the minimum approach distances 2. Permission has been granted by the electricity company 3. Safe systems of work have been documented and approved Legislation: State Health & Safety Legislation & Regulation 1 Week References: ISO31000 07-Aug-18 HIGH 22 Risk Treatment Required: Electrical Approach Distances MEDIUM 15 NON COMPLIANCE Ensure that a 90 day (quarterly) routine inspection is carried out prior to operation. Once completed ensure that these are continually carried out every 90 days.

1 Week References: AS2550.10- 07-Aug-18 HIGH 22 Risk Treatment Required: 90 day (quarterly) Routine Inspection MEDIUM 15 FALLING Ensure that a fall arrest harness and shock absorber lanyard are available for each person to be lifted in this item of plant. Ensure that these are free from damage, appropriately inspected, marked accordingly and available at all times whilst this item of plant is in operation. 1 Week References: AS/NZS1418.10 07-Aug-18 HIGH 22 Risk Treatment Required: Fall Arrest Harness MEDIUM 15 Page 5 of 16 Assessed By Brendan Everingham Model FVZ 1400 6x4 Make Isuzu Type EWP - Boom Date 31-Jul-2018 Chassis / VIN JALFVZ13LJ3600022

HAZARD(S) Prelim. Risk Rating Residual Risk Rating Time Frame Due Date Date Rectified Initial CRUSHING Ensure that a safety support and clear instruction label adjacent are installed to the cabin/bonnet prior to accessing the engine and area under for maintenance or any other purpose. Once installed these must be fully functional and serviceable at all times. These must be used when accessing the engine and the area under the engine for maintenance or any other purpose. Legislation: State Health & Safety Legislation & Regulation 1 Week References: AS/NZS4024.1201 07-Aug-18 HIGH 22 Risk Treatment Required: Cabin/Bonnet Support LOW 2 CRUSHING, INSTABILITY Ensure that all stabiliser legs fitted to this item of plant meet the following criteria - 1. Means provided to securely loacte each stabiliser in the retracted position 2. Means is provided to indicate that the stabiliser is in the correct position horizontally to provide adequate support. Once achieved, all of these criteria must be met at all times whilst this item of plant is in operation. 1 Week References: AS/NZS4024.1201 07-Aug-18 HIGH 22 Risk Treatment Required: Stabiliser Leg Requirements MEDIUM 15 ENTRAPMENT Ensure that this EWP is fitted with an emergency override system (e.g. a hand pump, a secondary power unit, gravity lowering valves) with instruction label adjacent the controls to this system to allow the platform to be lowered in the event of a power failure or incapacitated operator. Once fitted this system and instruction label must be present, fully function and legible at all times whilst this item of plant is in operation. 1 Week References: AS/NZS1418.10 07-Aug-18 HIGH 22 Risk Treatment Required: Emergency Descent Device HIGH 21 NON COMPLIANCE Ensure that this item of plant has an annual periodic inspection which is carried out by a competent person and to determine if this item of plant is safe for use. Documentation to this effect must be available once the inspection is complete. This item of plant must be re-inspected every 12 months by a competent person and new documentation be provided.

1 Week References: AS2550.10- 07-Aug-18 HIGH 22 Risk Treatment Required: Plant (annual) Periodic Inspection MEDIUM 15 CRUSHING Ensure that this item of plant is fitted with hydraulic cylinder locking devices to each stabiliser to prevent movement in the event of hydraulic failure. Once fitted these devices must be fully functional at all times whilst this item of plant is in operation. 1 Week References: AS/NZS4024.1201, AS1418.1 07-Aug-18 HIGH 22 Risk Treatment Required: Hydraulic Locking Devices for Stabilisers MEDIUM 15 NON COMPLIANCE Ensure that this work platform is permanently and legibly marked with the following information - (a) The rated capacity, in kg (b) The rated capacity, given as allowable number of persons and mass of equipment, in kg (c) Maximum allowable wind speed, in metres per second or where the EWP is designed for use in non-wind conditions, advice to that effect (d) Whether "electrically insulated" and the level of insulation (e) Information related to the use and load rating of the equipment for material handling (f) Location of lanyard anchorage points and the allowable number of persons that can be connected to each point. Once fitted this information must be legible and adhered with at all times whilst this item of plant is in operation. 1 Week References: AS/NZS1418.10 07-Aug-18 HIGH 22 Risk Treatment Required: Work Platform Information Plate HIGH 21 Page 6 of 16 Assessed By Brendan Everingham Model FVZ 1400 6x4 Make Isuzu Type EWP - Boom Date 31-Jul-2018 Chassis / VIN JALFVZ13LJ3600022

HAZARD(S) Prelim. Risk Rating Residual Risk Rating Time Frame Due Date Date Rectified Initial BURNS, EXPLOSION, POISONING Ensure the tank(s) on this item of plant have clear, legible label(s) identifying their contents, and if appropriate any necessary controls re: the contents. Once attached these must be present, clear and legible at all times. (this includes radiator, hydraulic and petrol/diesel tanks) Legislation: State Health & Safety Legislation & Regulation 1 Week References: Work Health & Safety Act & Regulations- 07-Aug-18 HIGH 22 Risk Treatment Required: Tank ID Label MEDIUM 15 COLLISION, CRUSHING Ensure this item of plant fitted with a reverse movement sensor alarm which is automatically activated when reverse gear is selected prior to operating this item of plant. Once fitted it must be fully functional and serviceable at all times whilst this item of plant is in operation. Legislation: State Health & Safety Legislation & Regulation 1 Week References: ISO7731 07-Aug-18 HIGH 22 Risk Treatment Required: Reverse Movement Alarm MEDIUM 15 INCORRECT OPERATION Source or develop pre-operational safety checklist for this EWP - Boom. (Pre-operational checklist is available via the Custom Reports section of Plant Assessor) 1 Week References: Work Health & Safety Act & Regulations- 07-Aug-18 HIGH 22 Risk Treatment Required: Pre-op Checklist EWP - Boom MEDIUM 15 INCORRECT OPERATION Source or develop Safe Operation Procedures for this EWP - Boom. (Safe Operation Procedures are available via the Custom Reports section of Plant Assessor) 1 Week References: Work Health & Safety Act & Regulations- 07-Aug-18 HIGH 22 Risk Treatment Required: SOP EWP - Boom MEDIUM 15 CRUSHING The load carrying cylinders on this item of plant must be fitted with automatic means (e.g. load-holding valves) to prevent uncontrolled movement of the unit in the case of loss of power or hydraulic failure. Once fitted these devices must be present and fully functional at all times whilst this item of plant is in operation.

1 Week References: AS1418.1 07-Aug-18 HIGH 22 Risk Treatment Required: Hydraulic Load Holding Devices LOW 2 INCORRECT OPERATION The manufacturer's maintenance manual(s) are not available for this item of plant These manuals must be sourced and made freely available to all persons carrying out maintenance activities as a requirement of current legislation. If these manuals cannot be sourced, the maintenance manual(s) must be developed by a competent person, and then made available to all relevent persons. Legislation: State Health & Safety Legislation & Regulation 1 Week References: Work Health & Safety Act & Regulations- 07-Aug-18 HIGH 22 Risk Treatment Required: Maintenance Manual MEDIUM 15 INCORRECT OPERATION The manufacturer's operation handbook is not available for this item of plant. A full assessment of the competence of operators must also be undertaken. This handbook must be sourced and made available to all operators and maintenance staff at all times as a requirement of current legislation. If Operation handbook cannot be sourced the operation manual must be developed by a competent person. All personnel who may operate this item of plant must read and be familiar with this handbook prior to operating.

Legislation: State Health & Safety Legislation & Regulation 1 Week References: Work Health & Safety Act & Regulations- 07-Aug-18 HIGH 22 Risk Treatment Required: Operation Handbook MEDIUM 15 Page 7 of 16 Assessed By Brendan Everingham Model FVZ 1400 6x4 Make Isuzu Type EWP - Boom Date 31-Jul-2018 Chassis / VIN JALFVZ13LJ3600022

HAZARD(S) Prelim. Risk Rating Residual Risk Rating Time Frame Due Date Date Rectified Initial COLLISION, CRUSHING, ENTANGLEMENT, STRIKING This item of plant does not have a neutral start control in place. Ensure that a neutral start control is in place prior to operating this item of plant. Once fitted it must be fully functional and serviceable at all times whilst this item of plant is in operation. Legislation: State Health & Safety Legislation & Regulation 1 Week References: AS4024.1603 07-Aug-18 HIGH 22 Risk Treatment Required: Neutral Start MEDIUM 15 COLLISION, CRUSHING, OPERATIONAL MALFUNCTION This item of plant does not have fully functional locking devices fitted for use during transit. These must be installed and used whenever the machine is in transit. A clear instruction label adjacent must be present at all times.

Legislation: State Health & Safety Legislation & Regulation 1 Week References: ISO31000 07-Aug-18 HIGH 22 Risk Treatment Required: Transit Locking Devices MEDIUM 15 TIP OVER This item of plant is fitted with manually operated stabilisers, for which the controls must be interlocked to prevent the elevating work platform from being elevated until the stabilisers are within the manufacturers specification. Once fitted this interlock must be fully functional at all times whilst this item of plant is in operation.

1 Week References: AS/NZS1418.10 07-Aug-18 HIGH 22 Risk Treatment Required: Stabiliser Interlock MEDIUM 15 NON COMPLIANCE This item of plant is not to be used until an authorised, qualified and competent person inspects this item for mechanical soundness and compliance with the relevant parts of AS1418 and certifies this item of plant safe to be used for its intended purpose. It is recommended that before any sale of this item of plant a new inspection and certification take place by an authorised, qualified and competent person.

Legislation: State Health & Safety Legislation & Regulation 1 Week References: AS2550.10- 07-Aug-18 HIGH 22 Risk Treatment Required: Structural Certification MEDIUM 15 INCORRECT OPERATION This item of plant must be fitted with a "deadman" type power-on control connected with other controls so that simultaneous actuation of two independent controls effects movement of the EWP. Once fitted this control must be present and fully servicable at all times whilst this item of plant is in operation.

1 Week References: AS/NZS1418.10 07-Aug-18 HIGH 22 Risk Treatment Required: EWP Dead Man Controls LOW 5 TIP OVER This item of plant must be fitted with a device to indicate whether the inclination of the chassis is within the limits permitted by the manufacturer. Once fitted this device must be fully functional at all times whilst this item of plant is in operation. The limits set by this device must NEVER be exceeded or serious injury or death may occur. 1 Week References: AS/NZS1418.10 07-Aug-18 HIGH 22 Risk Treatment Required: Chassis Inclination Display MEDIUM 15 Page 8 of 16 Assessed By Brendan Everingham Model FVZ 1400 6x4 Make Isuzu Type EWP - Boom Date 31-Jul-2018 Chassis / VIN JALFVZ13LJ3600022

HAZARD(S) Prelim. Risk Rating Residual Risk Rating Time Frame Due Date Date Rectified Initial CUTTING, ENTANGLEMENT, SHEARING This item of plant must be fitted with an emergency stop device which meets the following criteria prior to operation. 1. Is operational 2. Is coloured red with yellow background 3. Is clearly labeled as to purpose and method of operation 4. Is easily accessible to the operator(s) at all times whilst operating this item of plant 5. Resetting of emergency stop does not automatically restart machine 6. Is located at each operator control station.

Once fitted it must be serviceable at all times whilst this item of plant is in operation. 1 Week References: AS/NZS4024.1604 07-Aug-18 HIGH 22 Risk Treatment Required: Emergency Stop Device MEDIUM 15 NON COMPLIANCE, OPERATIONAL MALFUNCTION Ensure that this item of plant has a log book available on the item of plant at all times and that the book contains an up to date record of the service, maintenance, pre-op checks and use of this item of plant. 1 Week References: AS2550.10- 07-Aug-18 HIGH 21 Risk Treatment Required: Log Book MEDIUM 15 OPERATIONAL MALFUNCTION Service and maintenance records are not available for this item of plant. This risk assessment will form the basis of your records for this item of plant. Service and maintenance records must be developed and maintained as part of your plant safety management programme. This includes regular inspections re: the general condition of the item of plant including (but not limited to) tyre condition, oil levels and wear and tear on critical items such as brakes and steering, etc. All OEM prescribed, scheduled and non scheduled maintenance must also be documented as part of these records.

Legislation: State Health & Safety Legislation & Regulation 1 Week References: Work Health & Safety Act & Regulations- 07-Aug-18 HIGH 21 Risk Treatment Required: Service Records MEDIUM 15 BURNS, ENTANGLEMENT, SHEARING Ensure all engine guards have a hazard warning label which states that the guard must not be opened unless the engine is not running and all moving parts behind have stopped. These labels must be present and fully functional and serviceable at all times whilst this item of plant is in operation. Legislation: State Health & Safety Legislation & Regulation 1 Week References: AS/NZS4024.1201, AS1319- 07-Aug-18 HIGH 19 Risk Treatment Required: Engine Guard Label MEDIUM 13 BURNS, STRIKING Ensure that a sturdy, permanent shield is installed to prevent injury due to fluid jet or movement (whiplash) of all hydraulic hoses as a result of fluid leakage or component failure. Once installed this shield(s) must be present and fully functional at all times whilst this item of plant is in operation. 1 Week References: AS2671, AS4024, ISO4413 07-Aug-18 HIGH 19 Risk Treatment Required: Hydraulic Hose Failure Shield LOW 5 Assessor Comments: Hydraulic hoses at seated ground controls are not fitted with burst protective sleeving. FIRE No fire extinguishers are installed on this item of plant. Fire extinguisher(s) to AS 1841 must be present and fully functional and serviceable at all times. They must be readily accessible to the operator. Regular inspections must also be carried out in accordance with the manufacturer’s requirements and AS 1851 Legislation: State Health & Safety Legislation & Regulation 1 Month References: AS/NZS1841, AS1851 30-Aug-18 MEDIUM 13 Risk Treatment Required: Fire Extinguisher LOW 4 Page 9 of 16 Assessed By Brendan Everingham Model FVZ 1400 6x4 Make Isuzu Type EWP - Boom Date 31-Jul-2018 Chassis / VIN JALFVZ13LJ3600022

HAZARD(S) Prelim. Risk Rating Residual Risk Rating Time Frame Due Date Date Rectified Initial FALLING, SLIPPING Ensure the access and egress to the cabin/work area has an instruction label fitted with the following information as a minimum - All personnel must - 1. Always face the item of plant during access and egress. 2. Always maintain three points of contact during access and egress. 3.Ensure the steps are clean. 4. Never jump off machine. Once fitted this label must be clear and legible at all times whilst this item of plant is in operation. 1 Month References: ISO31000 30-Aug-18 MEDIUM 12 Risk Treatment Required: Access/Egress Instruction Label LOW 6 INCORRECT OPERATION This item of plant must be fitted with duplicate controls at the elevated platform and ground level. The ground level controls must be capable of overiding the platform controls. Once fitted these safety features must be fully functional at all times whilst this item of plant is in operation. This will allow platform recovery during sickness or injury to the operator.

3 Months References: AS/NZS1418.10 29-Oct-18 LOW 3 Risk Treatment Required: EWP Duplicate Controls LOW 1 RISK TREATMENTS IN PLACE This section of the report pertains to risk treatments currently in place on this item of plant. This section must be read in conjunction with the safety section of the manufacturers handbook. All operators must read and understand the entire contents of this section prior to operating this item of plant. These treatments or equivalent must remain in place at all times whilst this item of plant is in operation. SECTION 5 HAZARD(S) Prelim. Risk Rating Residual Risk Rating COLLISION, CRUSHING This item of plant is fitted with a fully functional audible warning device such as a horn. This must be easily accessed by the operator, and easily identifiable by nearby pedestrians.

All operators should ensure the warning devices are functional at the start of each shift, by completing pre-start checklists. Warning devices should operate automatically where appropriate (eg reversing) Risk Treatment In Place: Warning Device (horn) References: ISO7731 MEDIUM 12 LOW 6 STRAINS All controls including all levers, buttons, pedals, switches etc, are placed near the operator work position and are easy to reach and operate during the execution of the operator's normal duties. This applies for all persons within the 95th percentile of the normal population distribution. Risk Treatment In Place: Controls Ergonomics References: AS/NZS4024.1901 HIGH 19 LOW 5 SLIPPING Safe access and egress to the cabin/work area(s) must be maintained at all times whilst this item of plant is in operation. It must be non slip, free from damage, located at a height so as to not cause undue body stresses and strains with three points of contact available to personnel at all times. All personnel must - 1. Always face the item of plant during access and egress. 2. Always maintain three points of contact during access and egress. 3. Never carry an object(s) in his/her hand(s) during access and egress. 4. Never jump off machine.

Risk Treatment In Place: Operator Work Area Access/Egress References: AS1657 MEDIUM 12 LOW 6 Page 10 of 16 Assessed By Brendan Everingham Model FVZ 1400 6x4 Make Isuzu Type EWP - Boom Date 31-Jul-2018 Chassis / VIN JALFVZ13LJ3600022

HAZARD(S) Prelim. Risk Rating Residual Risk Rating INCORRECT OPERATION All controls including all levers, buttons, pedals, switches etc. are clearly labelled as to their purpose and method of operation. These labels must be maintained in a clean and serviceable condition at all times. Risk Treatment In Place: Control Labels References: AS/NZS4024.1905 HIGH 22 MEDIUM 15 ENTRAPMENT The operator cabin/work area on this item of plant has a minimum of two (2) possible exits. These must be functional and accessible at all times whenever the item of plant is manned, whether during operation or maintenance activities.

Risk Treatment In Place: Two Operator Exits References: Work Health & Safety Act & Regulations- HIGH 21 MEDIUM 15 POOR VISIBILITY Ensure the cabin/work area safety glass windows and screens are kept clean and free from cracks and other damage at all times whilst this item of plant is in use. Risk Treatment In Place: Windows & Screens References: AS/NZS4024.1201 MEDIUM 9 LOW 4 INCORRECT OPERATION The controls fitted to this item of plant are orientated so that the movement of the control is consistent with the action of the machine e.g. moving a control lever to the left results in the machine turning to the left. This design feature must be maintained at all times whilst this item of plant is in operation.

Risk Treatment In Place: Intuitive Controls References: AS/NZS4024.1906 HIGH 20 MEDIUM 14 INCORRECT OPERATION, SLIPPING All controls including all levers, buttons, pedals, switches etc. must be kept non-slip and free from damage at all times. Risk Treatment In Place: Control Levers/Pedals/Buttons References: AS/NZS4024.1901 HIGH 17 LOW 6 INCORRECT OPERATION This item of plant is fitted with "hold to run" or "deadman" type controls. Operators and maintenance staff MUST NEVER attempt to bypass this important safety feature. Failure to comply with this instruction may lead to serious injury or death.

Risk Treatment In Place: Hold To Run Controls References: AS/NZS4024.1906 CRITICAL 24 MEDIUM 15 CRUSHING, ENTANGLEMENT, PINCHING, SHEARING All controls are fitted with a device/method to prevent accidental operation. This device must be fully functional at all times whilst this item of plant is in operation. Risk Treatment In Place: Accidental Operation Protection References: AS/NZS4024.1906 HIGH 22 MEDIUM 15 INCORRECT OPERATION, SLIPPING All work area floors are non-slip and free from damage & debris. Floor area must remain non-slip and free from damage & debris, including rubbish, tools and other items, at all times whilst this item of plant is in use. Risk Treatment In Place: Operator Floor References: AS/NZS4024.1201 MEDIUM 9 LOW 4 Page 11 of 16 Assessed By Brendan Everingham Model FVZ 1400 6x4 Make Isuzu Type EWP - Boom Date 31-Jul-2018 Chassis / VIN JALFVZ13LJ3600022

HAZARD(S) Prelim. Risk Rating Residual Risk Rating COLLISION, POOR VISIBILITY The operator rear view mirrors fitted to this item of plant must be fully functional and kept clean at all times. There must always be at least one mirror on each side to provide rear vision to the operator to avoid striking bystanders and objects. Risk Treatment In Place: Operator Mirrors References: AS/NZS4024.1201 MEDIUM 12 MEDIUM 11 STRAINS The operator seat fitted to this item of plant must remain free from damage and tears, and be permanently and securely fitted at all times. Risk Treatment In Place: Operator Seat References: AS/NZS4024.1401 MEDIUM 9 LOW 1 CRUSHING This item of plant is fitted with an operator seat belt. This seat belt must be free from damage, and permanently and sturdily attached at all times whilst this item of plant is in operation. Operators must use this seat belt at all times during operation.

Risk Treatment In Place: Seat Belt References: Australian Design Rules- HIGH 22 MEDIUM 15 CRUSHING An ergonomic passenger seat with an approved restraint is fitted to this item of plant. These must both be serviceable at all times whilst this item of plant is in operation. Risk Treatment In Place: Passenger Seat References: AS/NZS4024.1401 HIGH 22 MEDIUM 15 POOR VISIBILITY The windscreen wipers and washers fitted to this item of plant must be fully functional at all times. Risk Treatment In Place: Windscreen Wipers References: AS/NZS4024.1201 HIGH 21 MEDIUM 15 DEHYDRATION, HEAT STROKE This item of plant is fitted with an air conditioned cabin. This air conditioned cabin helps control the air quality and temperature for the operator and also provides shade from the sun. The air conditioner must be fully functional and serviceable at all times whilst this item of plant is in operation. Risk Treatment In Place: Air Conditioning References: ISO31000 MEDIUM 9 LOW 4 COLLISION, CRUSHING The brakes fitted to this item of plant must be fully functional at all times whilst this item of plant is in operation. The brakes must be regularly inspected and tested. These inspections and tests must be documented as part of your plant safety programme.

Risk Treatment In Place: Brakes References: Australian Design Rules- CRITICAL 25 MEDIUM 15 COLLISION, CRUSHING The park brake fitted to this item of plant is fully functional at all times. The park brake must be regularly inspected and tested. These inspections and tests must be documented as part of your plant safety programme. Risk Treatment In Place: Park Brake References: Australian Design Rules- CRITICAL 24 MEDIUM 15 FALLING This item of plant is fitted with anchorage points for the safety harnesses of each operator. These anchor points must be permanently and sturdily attached at all times whilst this item of plant is in operation. All operators must employ safety harnesses attached to these points at all times whilst this item of plant is in operation.

Risk Treatment In Place: Harness Attachment Points References: AS/NZS1418.10 HIGH 22 MEDIUM 12 Page 12 of 16 Assessed By Brendan Everingham Model FVZ 1400 6x4 Make Isuzu Type EWP - Boom Date 31-Jul-2018 Chassis / VIN JALFVZ13LJ3600022

HAZARD(S) Prelim. Risk Rating Residual Risk Rating CRUSHING This item of plant has a hazard warning label re: crushing, adjacent the stabiliser legs. These labels must be present, clear and legible at all times. Risk Treatment In Place: Stabiliser Legs References: AS/NZS4024.1201, AS1319- MEDIUM 9 LOW 5 BURNS, STRIKING This item of plant has hydraulic hoses. These hoses must be inspected each day or before each use for wear and tear. If there are visible signs of wear immediate action must be taken to control the risk arising from this wear. These inspections must be documented. Hydraulic fluid at high pressure can penetrate the skin, never use any part of your body to check for leaks. If oil penetrates the skin seek medical advice immediately. Always use a piece of cardboard or similar to check for suspected leaks.

Hydraulic pressure can be stored and is a hazard. Before disconnection or connection of hydraulic hoses complete the following steps - 1. Stop engine 2. Keep all bystanders clear of the work area 3. Refer to operators manual as to methods to release pressure 4. Wait 5 minutes Risk Treatment In Place: Hydraulic Hoses References: AS2671, AS4024 HIGH 22 MEDIUM 15 BURNS, STRIKING The hydraulic hoses to this item of plant are free from damage and protected against damage arising from contact with the plant structure. Ensure that hoses are free from damage and that protection is in place at all times whilst this item of plant is in operation. Inspection of the hydraulic hoses and protection system should be conducted regularly and documented as part of your plant safety programme.

Risk Treatment In Place: Hydraulic Damage References: AS2671, AS4024, ISO4413 HIGH 22 MEDIUM 15 COLLISION, POOR VISIBILITY This item of plant is fitted with self contained lighting. All of these lights must be fully functional and serviceable whilst this item of plant is in operation in areas of reduced light. If any of these lights stop working the operation must cease immediately and the faulty light be repaired before operation can continue in the areas of reduced light. Risk Treatment In Place: Machine Lights References: Australian Design Rules- HIGH 22 MEDIUM 15 CRUSHING, SLIPPING This item of plant is fitted with an open operator work platform/basket. This basket must meet the following criteria as a minimum at all times whilst this item of plant is in operation - 1. Floor is flat and non slip 2. All handrail is at least 0.95m 3. All hand rails have a mid rail 4. All sides and ends have a kick plate which is at least 100mm high Risk Treatment In Place: Open Platform requirements References: AS/NZS1418.10 HIGH 22 LOW 5 ENTANGLEMENT The engine fan and alternator belts, pulleys and gears are guarded. These guards must be present and fully functional and serviceable at all times whilst this item of plant is in operation.

Risk Treatment In Place: Engine Guards References: AS/NZS4024.1601 HIGH 22 MEDIUM 15 BURNS The engine exhaust on this item of plant is fitted with a guard to prevent injury to any person and control the risk of initiating a fire. It must be present and fully functional and serviceable at all times whilst this item of plant is in operation. Risk Treatment In Place: Exhaust References: AS/NZS4024.1201 MEDIUM 9 LOW 5 Page 13 of 16 Assessed By Brendan Everingham Model FVZ 1400 6x4 Make Isuzu Type EWP - Boom Date 31-Jul-2018 Chassis / VIN JALFVZ13LJ3600022

HAZARD(S) Prelim. Risk Rating Residual Risk Rating BURNS, ELECTRIC SHOCK All batteries fitted to this item of plant are constrained to prevent displacement & fitted with a permanent sturdy cover which allows for ventilation. The constraint and cover must be present and fully functional and serviceable at all times whilst this item of plant is in operation. Risk Treatment In Place: Battery Cover References: AS/NZS4024.1201 MEDIUM 12 LOW 6 OPERATIONAL MALFUNCTION This item of plant must remain free from leaks at all times whilst in operation (this includes engine, transmission, cooling system, air, fuel, drive line, wheel hubs, steering and hydraulics). Development of a major leak will require this item of plant to be stood-down until repaired. Minor leaks detected must be repaired within 1-14 days.

Risk Treatment In Place: Major Fluid Leaks References: ISO31000 HIGH 22 LOW 2 COLLISION This item of plant is fitted with lighting to indicate presence, turning and braking. All of these lights must be fully functional whilst this item of plant is in operation in areas of reduced light. If any of these lights stop working the operation must cease immediately and the faulty light be repaired before operation can continue in the areas of reduced light. Risk Treatment In Place: Turning, Braking & Presence Lights References: Australian Design Rules- HIGH 22 MEDIUM 11 COLLISION, INSTABILITY The tyres and wheel components must be inspected as part of a "pre start" checklist. These inspections must be documented as part of your plant safety programme.

Risk Treatment In Place: Tyres References: ISO31000 HIGH 22 MEDIUM 15 POOR SIGNAGE This item of plant has a rated capacity (SWL) label. This capacity must not be exceeded at any time during operation. This label must be clear and legible at all times whilst this item of plant is in operation. Risk Treatment In Place: Rated Capacity (SWL) Label References: AS1418.1 HIGH 22 HIGH 21 COLLISION This item of plant is fitted with a safety beacon. This beacon must meet the following criteria at all times whilst this item of plant fitted is in operation - - Is visible up to 200m in all directions (allowing for intermittent obstruction from the plant structure whilst the plant is in operation) - Is fitted in the most appropriate location on machine to maximise visibility without risking continual damage NOTE: more than one beacon may be fitted to meet these criteria.

Risk Treatment In Place: Beacon References: AS/NZS4024.1201 HIGH 22 MEDIUM 15 OPERATIONAL MALFUNCTION The plant is in original condition. Risk Treatment In Place: Plant Modification References: ISO31000 HIGH 22 LOW 2 CURRENT OR PREVIOUS STRUCTURAL DAMAGE Regular checks for structural damage must be undertaken. Look for cracks in frames/chassis (current or repaired), bends or damage to structural components, etc. Risk Treatment In Place: Structural Integrity References: ISO31000 CRITICAL 25 MEDIUM 15 Page 14 of 16 Assessed By Brendan Everingham Model FVZ 1400 6x4 Make Isuzu Type EWP - Boom Date 31-Jul-2018 Chassis / VIN JALFVZ13LJ3600022

IMAGES AND NOTES SECTION 6 Page 15 of 16 Assessed By Brendan Everingham Model FVZ 1400 6x4 Make Isuzu Type EWP - Boom Date 31-Jul-2018 Chassis / VIN JALFVZ13LJ3600022

Plant Assessor Safety Label Order Form 1. SAFETY LABELS REQUIRED Type Make Model Chassis / VIN EWP - Boom Isuzu FVZ 1400 6x4 JALFVZ13LJ360002 2 Identifier2 As a result of a Plant Risk Assessment the following safety labels have been identified as required. To order these labels simply complete sections 2 & 3 on the following page then fax both pages to (02) 4028 6031 or alternately scan & email to info@assessor.com.au. Same day dispatch is guaranteed either way. NOTE: PLEASE SEND BOTH PAGES OF THE SAFETY LABEL ORDER FORM TO PLANT ASSESSOR Label ID Label Name Quantity Price Each (excluding GST) Total Price (excluding GST) Label Location 0003 Overhead Electrical Approach Table 2 $6.00 $12.00 In view of operator and adjacent any high operator access points on machine. 0010 Guards 1 $4.50 $4.50 On all guards that have moving parts behind them.

0011 Adblue/Air/Diesel/Hyd.Oil/Unleaded/Coolant/En gine Oil 1 $3.00 $3.00 Adjacent to tank fill point (cut as required) 0019 Hot Pressurised System 1 $3.00 $3.00 Adjacent to pressurised system cap e.g. radiator. 0029 Transit Safety Device 1 $3.00 $3.00 Adjacent all transit safety locking devices. 0041 Access Instructions 4 $3.00 $12.00 Adjacent to all operator and maintenance staff access and egress steps/ladders etc. 0088 Emergency Stop 1 $4.50 $4.50 Adjacent emergency stop control $42.00 Safety Label Total (excl GST) Page 16 of 16 Assessed By Brendan Everingham Model FVZ 1400 6x4 Make Isuzu Type EWP - Boom Date 31-Jul-2018 Chassis / VIN JALFVZ13LJ3600022

PLANT ASSESSR SAFETY LABEL ORDER FORM 2014 V1 Contact: t 1300 728 852 w assessor.com.au f 02 4028 6031 Page 1 of 2

Plant Assessor Safety Label Order Form 2. PURCHASER DETAILS BILLING DETAILS SHIPPING DETAILS Surname Company Billing Address Suburb / Town Given name(s) State Postcode Ship to my billing address (as above) Surname Company Delivery Address Suburb / Town Given name(s) State Postcode 3. PAYMENT DETAILS AND ORDER TOTAL Type of Credit Card Visa Mastercard Card Number Expiry Date CVV / Name on Card Description of Services: Safety Labels Postage and Handling - Regular $7.50 Express $15.00 OR I hereby authorise Plant Assessor to debit my nominated card account with the amount specified above. Cardholder's signature: Date: Labels #Name?

Postage Total inc GST >> Total excl GST GST Email Address Phone NOTE: PLEASE SEND BOTH PAGES OF THE SAFETY LABEL ORDER FORM TO PLANT ASSESSOR PLANT ASSESSOR SAFETY LABEL ORDER FORM 2014 V1 Page 2 of 2 02 4028 6031 f assessor.com.au w 1300 728 852 Contact: t

Owner Pickles Auctions Perth Created By Brendan Everingham Date 31-Jul-2018 TYPE EWP - Boom MAKE Isuzu MODEL FVZ 1400 6x4 CHASSIS / VIN JALFVZ13LJ3600022 Report Number PA 20180731-1722 Assessment Purpose Sale State WA Assist. Assessor(s) RISK MANAGEMENT REPORT Assessor Brendan Everingham I the undersigned acknowledge that I have read and understand the risk management report described above. I also acknowledge that I have received a copy of this risk management report. I also acknowledge that I am authorised to sign on behalf of the purchaser.

PURCHASER ACKNOWLEDGEMENT The manufacturer's operational & maintenance handbooks have been supplied, Signature Position Date Company Name Name Please transfer this assessment to my Plant Assessor membership as a (circle one) HIRE / PLANT IN USE asessment. My Plant Assessor username is _ _ Lot Number 26091857 Assessed By Brendan Everingham Model FVZ 1400 6x4 Make Isuzu Type EWP - Boom Date 31-Jul-2018 Chassis / VIN JALFVZ13LJ3600022 PA 20180731-1722 Wednesday, 1 Aug 2018 07:00 PM

You can also read