CORDLESS GRASS TRIMMER & SHEAR

STANDARD EQUIPMENT



                                                                                                                                                     Cordless Grass Trimmer /
                                                                                                                                                     Shear




                                                                                                                                                     Hedge Trimmer Blade

 CORDLESS GRASS
 TRIMMER & SHEAR                                                                                                                                     Grass Shear Blade

 INSTRUCTION MANUAL

 SPECIFICATIONS
 Voltage:		         18V
 No Load Speed:		 1,200/min
 Hedge Trimmer:      200mm Blade
 Grass Shear:       100mm Blade                                                                                                                       Blade Covers
 Max. Cutting Cap.: 8mm
 Weight:		1.0kg


ozito.com.au


                                                                                                                                                           PXCGSS-018



                                                                       WARRANTY
  IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST                                       The benefits provided under this warranty are in addition
                                                                                              to other rights and remedies which are available to you at law.
  RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
                                                                                              Our goods come with guarantees that cannot be excluded
  WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING                                     at law. You are entitled to a replacement or refund for a major failure and for
  YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER                                     compensation for any other reasonably foreseeable loss or damage. You are also
  SERVICE HELPLINE:                                                                           entitled to have the goods repaired
                                                                                              or replaced if the goods fail to be of acceptable quality and the failure does not
  Australia 1800 069 486                                                                      amount to a major failure.
                                                                                              Generally you will be responsible for all costs associated with
  New Zealand 0508 069 486                                                                    a claim under this warranty, however, where you have suffered
                                                                                              any additional direct loss as a result of a defective product you
                                                                                              may be able to claim such expenses by contacting our customer service helpline
                                                                                              above.

  TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
                                                                                              5 YEAR REPLACEMENT WARRANTY
  NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER                                           Your Product is guaranteed for a period of 60 months from the original date of
  SERVICE REPRESENTATIVE WILL TAKE YOUR CALL                                                  purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
  AND ANSWER ANY QUESTIONS YOU MAY                                                            will be replaced in accordance with the terms of this warranty. Lithium Ion
                                                                                              batteries and chargers are covered by a 36 month
  HAVE RELATING TO THE WARRANTY POLICY                                                        warranty. Warranty excludes consumable parts, for example blades, blade
  OR PROCEDURE.                                                                               cover.


  WARNING
  The following actions will result in the warranty being
  void.
  • If the tool has been operated on a supply voltage other
     than that specified on the tool.
  • If the tool shows signs of damage or defects caused
     by or resulting from abuse, accidents or alterations.
  • Failure to perform maintenance as set out within the instruction manual.
  • If the tool is disassembled or tampered with in any way.

OZITO   Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.                                                                                      0318
KNOW YOUR PRODUCT                                                        SETUP & PREPARATION

CORDLESS TRIMMER/SHEAR
                                                                       1. CHANGING BLADES
1. Base Release Button                           4. On/Off Trigger
2. Removable Base                                5. Sure Grip Handle           WARNING! ENSURE THE TOOL IS SWITCHED
                                                                               OFF AND BATTERY DISCONNECTED BEFORE
3. Safety Switch                                 6. Battery Seating            PERFORMING ANY OF THE FOLLOWING STEPS.
                                                                               WEAR GLOVES, BLADES ARE SHARP.


                                                                       Inserting the Blade Base
             1      2       3       4        5       6                 1.	Slide the back of the
                                                                           blade base into the
                                                                           recess in the housing.




                                                                       2.	Push the front of the
                                                                           blade base into the
                                                                           housing until it clicks
                                                                           into place.




ACCESSORIES
                                                                       Remove the Blade Base
7. Hedge Trimmer Blade                        9. Blade Covers          1.	Press and hold the base
                                                                           release button.
8. Grass Shear Blade




                                                                       2.	Remove the base by
                                                                           lifting from the front and
                                                                           then sliding out.




      7     8       9                                                  Note: Ensure the base is supported by hand when the release button is
                                                                       pressed to prevent it falling unexpectedly.
BATTERY & CHARGER
                                                                              WARNING!: DO NOT USE ANY ATTACHMENTS
This tool is compatible with all battery and chargers from Ozito
                                                                              OR ACCESSORIES NOT RECOMMENDED BY THE
Power X Change Range.
                                                                              MANUFACTURER OF THIS PRODUCT, AS IT CAN
                                                                              RESULT IN SERIOUS PERSONAL INJURY.
                       ONLINE MANUAL
                       Scan this QR Code with your mobile
                       device to take you to the online manual.
OPERATION

2. INSERTING & REMOVING THE BATTERY       3. CONTROLS

 Inserting a Battery                        Switching On and Off

 1.	Align the ribs of the battery with   1.	Press and hold the safety switch
     the recess at the back of the            and then squeeze the on/off
     handle.                                  trigger to start.




                                           2.	To stop operation,
                                               release the on/off
                                               trigger.
 2.	Slide the battery in so
     that it clicks into place.




                                                  WARNING! CLEAR THE AREA TO BE CUT BEFORE
                                                  EACH USE. REMOVE ALL OBJECTS, SUCH AS CORDS,
                                                  LIGHTS, WIRE, OR STRING WHICH CAN BECOME
                                                  ENTANGLED IN THE CUTTING BLADE AND CREATE A
                                                  RISK OF SERIOUS PERSONAL INJURY.


 Removing a Battery

 1.	Press and hold the battery
     release tab and then slide out.
4. OPERATION

 Top cutting
 Use a wide sweeping motion. A slight
 downward tilt of the cutting blades in the
 direction of motion gives the best cutting
 results.




 Side cutting
 When trimming the sides of the hedge,
 begin at the bottom and cut upwards.
 Trim the side of a hedge so that it will be
 slightly narrower at the top. This shape
 will expose more of the hedge, resulting in
 a more uniform growth.




 Using the Grass Shear:
 Move the grass shear parallel to the ground. Direct the shear forward smoothly. Do
 not sweep the shear from side to side as this will not allow the blade to cut properly.




         WARNING!: IF THE BLADE JAMS ON AN HIDDEN
         ELECTRICAL CORD, DO NOT TOUCH THE BLADE!
         IT CAN BECOME LIVE AND VERY DANGEROUS.
         DISCONNECT THE ELECTRICAL SERVICE TO THE
         DAMAGED LINE BEFORE ATTEMPTING TO FREE THE
         BLADE.




                                                                                           PXCGSS-018
MAINTENANCE                                                                                              SPARE PARTS
           WARNING! ALWAYS ENSURE THE TOOL HAS
           COMPLETELY STOPPED AND THE BATTERY IS
                                                                                                           Spare parts can be ordered from the Special Orders
           REMOVED PRIOR TO ANY MAINTENANCE.                                                               Desk at your local Bunnings Warehouse.
                                                                                                           For further information, or any parts not listed here,
   Sharpening the cutting blade
                                                                                                           visit www.ozito.com.au or contact Ozito Customer
   1.	Start and stop your trimmer
                                                                                                           Service:
       until the cutter blade and the
       guard are slightly offset.                                                                          Australia 1800 069 486
   2.	Remove the battery pack from                                                                        New Zealand 0508 069 486
       your trimmer/shear.                                                                                 E-mail: enquiries@ozito.com.au
   3.	Clamp the blade assembly in a
       vise and file the exposed cutting surface of each blade tooth. Remove as
       little material as possible.
   4.	Remove the blade from
       the vise and insert the battery pack. Repeat
       steps 1-3 for the unsharpened edges of the
       blade teeth.
   Note: Do not operate your trimmer/shear with
   dull or damaged cutting blades. This may cause
   overload and will give unsatisfactory cutting
   results.

   Lubricating the blade
   For best operation and longer blade life, lubricate the blade with light weight machine
   oil before and after each use.
   1.	Remove the battery pack from the trimmer/
       shear.
                                                                                                           DESCRIPTION OF SYMBOLS
   2.	Lay the blade on a flat surface. Apply a light
       weight machine oil along the edge of the top
       blade.



           WARNING! DO NOT OIL WHILE THE TRIMMER/
           SHEAR IS RUNNING.

                                                                                                                  Regulator compliance mark
   Cleaning and Storage
   • 	Keep air intake clean and air vents free of debris to avoid overheating the motor.                          Read instruction manual                         Decibel level
   • 	Do not use cleaning agents to clean the plastic parts of the tool.
       A mild detergent on a damp cloth is recommended. Water must never come into contact with                       Do not use in the rain or leave the trimmer outdoors while raining.
       the tool.
   • 	If the trimmer vibrates abnormally, stop motor immediately. Abnormal vibration usually indicates                     Keep bystanders away. Do not operate whilst people especially
       a mechanical problem continued operation could lead to injury or damage.                                             children or pets are in the area.
   • 	Always place the blade cover on the blade before storing or transporting the hedge trimmer. Use
       caution to avoid the sharp teeth of the blade.
   • 	Store the hedge trimmer indoors, in a dry place that is inaccessible to children.



   Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the
   trimmer by an unauthorised person or by mishandling of the trimmer. This tool is designed for DIY use
   - use in commercial or industrial environments will void the warranty.




   TROUBLESHOOTING
Problem                  Cause                                Remedy
                                                                                                           CARING FOR THE ENVIRONMENT
Trimmer is not           Possible clogging                    Clean the trimmer blade of any                         Power tools that are no longer usable should not be disposed of with household
starting                                                         leaves or debris.                                    waste but in an environmentally friendly way. Please recycle where facilities exist.
                                                                                                                      Check with your local council authority for recycling advice.
                         Battery is low in charge              Charge battery
                                                                                                                      Recycling packaging reduces the need for landfill and raw materials. Reuse of
                         Battery not inserted properly        Insert battery pack correctly                           recycled material decreases pollution in the environment. Please recycle packaging
                                                                                                                      where facilities exist. Check with your local council authority for recycling advice.
Trimmer is not           Possible clogging                    Clean the trimmer blade of any
operating at full                                               leaves or debris.
capacity
Motor stops while        Battery has no power                 Charge battery
trimming
ELECTRICAL SAFETY
            WARNING! When using mains-powered tools, basic safety precautions, including                                                       Note: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is for
           the following, should always be followed to reduce risk of fire, electric shock, personal                                           added protection against injury resulting from a possible electrical insulation failure within the tool.
           injury and material damage.
 Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before operating the tool.                 The power supply for this products charger should be protected by a residual current device (rated at 30mA
 Save these instructions and other documents supplied with this tool for future reference.                                                     or less). A residual current device reduces the risk of electric shock.
 The charger has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating
 plate.
 Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.

              This tools charger is double insulated therefore no earth wire is required.


              If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard.




            GENERAL POWER TOOL SAFETY WARNINGS
            WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and                                         power tool in unexpected situations.
            instructions may result in electric shock, fire and/or serious injury.                                                        f.   Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
            Save all warnings and instructions for future reference. The term “power tool” in the                                               gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
warnings refers to your mains-operated (corded) power tool or battery-operated (cordless)                                                 g. 	If devices are provided for the connection of dust extraction and collection facilities,
power tool.                                                                                                                                     ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
1. Work area safety                                                                                                                       4. Power tool use and care
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.                                                          a. Do not force the power tool. Use the correct power tool for your application. The correct
b. Do not operate power tools in explosive atmospheres, such as in the presence of                                                             power tool will do the job better and safer at the rate for which it was designed.
     flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.                                      b. 	Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose                                          controlled with the switch is dangerous and must be repaired.
     control.                                                                                                                             c. Disconnect the plug from the power source and/or the battery pack from the power
2. Electrical safety                                                                                                                            tool before making any adjustments, changing accessories, or storing power tools. Such
a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use                                                        preventive safety measures reduce the risk of starting the power tool accidentally.
     any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will
                                                                                                                                          d. 	Store idle power tools out of the reach of children and do not allow persons unfamiliar
     reduce risk of electric shock.
                                                                                                                                                with the power tool or these instructions to operate the power tool. Power tools are dangerous in
b. 	Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges                                                     the hands of untrained users.
     and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
                                                                                                                                          e. 	Maintain power tools. Check for misalignment or binding of moving parts, breakage of
c. 	Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk                                    parts and any other condition that may affect the power tool’s operation. If damaged,
     of electric shock.                                                                                                                         have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power                                               f.    Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to
     tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords                                                bind and are easier to control.
     increase the risk of electric shock.
                                                                                                                                          g. 	Use the power tool, accessories and tool bits etc. in accordance with these instructions,
e. 	When operating a power tool outdoors, use an extension cord suitable for outdoor use.                                                       taking into account the working conditions and the work to be performed. Use of the power
     Use of a cord suitable for outdoor use reduces the risk of electric shock.                                                                  tool for operations different from those intended could result in a hazardous situation.
f.   If operating a power tool in a damp location is unavoidable, use a residual current device                                          5. Battery tool use and care
      (RCD) protected supply. Use of an RCD reduces the risk of electric shock.                                                           a.	Recharge only with the charger specified by the manufacturer. A charger that is suitable for one
3. Personal safety                                                                                                                               type of battery pack may create a risk of fire when used with another battery pack.
a. Stay alert, watch what you are doing and use common sense when operating a power                                                      b. 	Use power tools only with specifically designated battery packs. Use of any other battery packs may
      tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol                                                 create a risk of injury and fire.
      or medication. A moment of inattention while operating power tools may result in serious personal injury.                           c. When battery pack is not in use, keep it away from other metal objects, like paper clips,
b.	  Use personal protective equipment. Always wear eye protection. Protective equipment such as dust                                           coins, keys, nails, screws or other small metal objects, that can make a connection from
      mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.                one terminal to another. Shorting the battery terminals together may cause burns or a fire.
c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting                                            d. 	Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
      to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with                                            contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
      your finger on the switch or energising power tools that have the switch on invites accidents.                                             medical help. Liquid ejected from the battery may cause irritation or burns.
                                                                                                                                          6. Service
d. 	Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left                                          a. Have your power tool serviced by a qualified repair person using only identical
      attached to a rotating part of the power tool may result in personal injury.                                                               replacement parts. This will ensure that the safety of the power tool is maintained.
e. 	Do not overreach. Keep proper footing and balance at all times. This enables better control of the




          GRASS TRIMMER & SHEAR SAFETY WARNINGS
 • 	Keep all parts of the body away from the cutter blade. Do not remove cut                                                             • 	When not in use, store the trimmer out of the reach of children.
     material or hold material to be cut when blades are moving. Make sure the switch is off when                                         • 	Face the cutting blades away from yourself, other people and animals while the power is connected
     clearing jammed material. A moment of inattention while operating the trimmer may result in                                              to the trimmer (especially during operation).
     serious personal injury.
                                                                                                                                          • 	Keep ventilation openings clear of debris. Keep handles dry, clean and free of oil and grease.
 • 	Carry the trimmer by the handle with the cutter blade stopped. When
     transporting or storing the trimmer always fit the blade cover. Proper handling of the trimmer will                                  • 	Never reach underneath the trimmer (the cutting blade area) until it has completely stopped.
     reduce possible personal injury from the cutter blades.                                                                                           WARNING! When servicing, use only identical replacement parts. Use of any other parts
 • 	Hold the power tool by insulated gripping surfaces only, because the                                                                              may create a hazard or cause product damage. To ensure safety and reliability, all repairs
     cutter blade may contact hidden wiring. Cutter blades contacting a “live” wire may                                                                should be performed by a qualified service technician.
     make exposed metal parts of the power tool “live” and could give the operator an electric shock.                                                  WARNING! This appliance is not intended for use by young or infirm persons unless
 • 	Perform visual inspection on the hedge being trimmed. To ensure no wire                                                                           supervised by a responsible person to ensure that they can use the appliance safely. Young
     fences or foreign objects that the hedge trimmer may contact during operation.                                                                    children should be supervised to ensure that they do not play with the appliance.
 • 	Never allow children or people unfamiliar with these instructions to use the trimmer.
 • 	Avoid using the trimmer, while people, especially children or pets, are nearby.
 • 	Use the trimmer only in daylight or good artificial light.
 • 	Never operate the trimmer with damaged blades in place.
 • 	Switch on the trimmer only when the hands and feet are away from the cutting blades.
 • 	Use only the manufacturer’s recommended replacement parts and accessories.
 • 	Inspect and maintain the trimmer regularly. Have the trimmer repaired only by an authorized
     repairer.
STANDARD EQUIPMENT




                                                                                                                                                       Cordless Garden Sprayer



                                                                                                                                                       Spray Wand


 CORDLESS
 GARDEN SPRAYER
                                                                                                                                                       Spray Wand Handle
 INSTRUCTION MANUAL

 SPECIFICATIONS
 Voltage:			18V
 Tank Volume:			         3.5 litres
 Delivery Pressure Max.: 2.5 bar (36 psi)
 Flow Rate:			           500ml/min                                                                                                                     Hose
 Nozzle:			              Ø1.5mm
 Weight:			              1.2kg
 ozito.com.au

                                                                                                                                                       Shoulder Strap




                                                                                                                                                       PXCWSS-018


                                                                         WARRANTY
  IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST                                         The benefits provided under this warranty are in addition
                                                                                                to other rights and remedies which are available to you at law.
  RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
                                                                                                Our goods come with guarantees that cannot be excluded
  WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING                                       at law. You are entitled to a replacement or refund for a major failure and for
  YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER                                       compensation for any other reasonably foreseeable loss or damage. You are also
  SERVICE HELPLINE:                                                                             entitled to have the goods repaired
                                                                                                or replaced if the goods fail to be of acceptable quality and the failure does not
  Australia 1800 069 486                                                                        amount to a major failure.
                                                                                                Generally you will be responsible for all costs associated with
  New Zealand 0508 069 486                                                                      a claim under this warranty, however, where you have suffered
                                                                                                any additional direct loss as a result of a defective product you
                                                                                                may be able to claim such expenses by contacting our customer service helpline
                                                                                                above.
  TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
  NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER                                             5 YEAR REPLACEMENT WARRANTY
  SERVICE REPRESENTATIVE WILL TAKE YOUR CALL                                                    Your Product is guaranteed for a period of 60 months from the original date of
                                                                                                purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
  AND ANSWER ANY QUESTIONS YOU MAY                                                              will be replaced in accordance with the terms of this warranty. Lithium Ion
  HAVE RELATING TO THE WARRANTY POLICY                                                          batteries and chargers are covered by a 36 month
  OR PROCEDURE.                                                                                 warranty. Warranty excludes consumable parts, for example: shoulder strap .


  WARNING
  The following actions will result in the warranty being
  void.
  • If the tool has been operated on a supply voltage other
     than that specified on the tool.
  • If the tool shows signs of damage or defects caused
     by or resulting from abuse, accidents or alterations.
  • Failure to perform maintenance as set out within the instruction manual.
  • If the tool is disassembled or tampered with in any way
  • Professional, industrial or high frequency use..

OZITO     Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.                                                                                      1118
KNOW YOUR PRODUCT                                                                  SETUP & PREPARATION
CORDLESS GARDEN SPRAYER
                                                                                 1. ASSEMBLY
1. Adjustable Nozzle                             8. Extension Nut
2. Telescopic Extension                          9. Strap Mounting Point
3. Spray Wand                                    10. Motor Housing                      WARNING! ENSURE THE TOOL IS SWITCHED
                                                                                        OFF AND BATTERY IS DISCONNECTED BEFORE
4.	Battery Port                                 11. Tank                               PERFORMING ANY OF THE FOLLOWING TASKS.
5. On Demand Spray Trigger                       12. On/Off Switch
6. Spray Wand Handle                             13. Latch                       Spray Wand
7. Hose                                          14. Measuring Cup               1.	Attach spray wand
                                                                                     together with spray wand
 1             2       3                      4           5          6      7        handle.




                                                                                 Hose
                                                                                 1.	Push one end of the hose fully
                                                                                     into the spray wand handle.




                                                                                 2.	Connect the nut by rotating
            8                   9        10            11 12           13   14       clockwise.


ACCESSORIES
15. Shoulder Strap



                       15

                                                                                 3.	Connect the opposite end of
                                                                                     hose to the garden sprayer.




BATTERY & CHARGER
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
                                                                                 Note: Check the hose and spray wand are connected securely. Check for
                                                                                 any leaks, if any leaks are found, stop using the sprayer and fix the leak before
                   ONLINE MANUAL                                                 continuing use.
                   Scan this QR Code with your mobile device
                   to take you to the online manual.
2. INSERTING & REMOVING THE BATTERY   3. PREPARATION

 Installing a Battery Pack             Shoulder Strap

1.	Align the ribs of the              1.	Clip the ends of the
    battery with the                       shoulder strap to
    recess in the sprayer.                 the mounting points
                                           on both ends of
                                           the sprayer motor
                                           housing.

                                       Note: To use the
                                       shoulder strap simply
                                       slide the strap over your
                                       shoulder so that some of
                                       the weight of the sprayer can be taken by your shoulder.

2.	Slide the battery in
    so that it clicks into             Mixture
    place.
                                              WARNING! THE PRODUCT IS DESIGNED FOR
                                              SPRAYING CONSUMER-GRADE HOME AND GARDEN
                                              CHEMICALS SUCH AS WEED KILLERS, FUNGICIDES,
                                              INSECTICIDES, AND FERTILIZERS.


                                       1.	Remove the battery prior to adding liquid to the tank.

                                       2.	Remove the measuring cup by
                                           rotating anti-clockwise.

Removing a Battery from the Sprayer

 1.	Press and hold the
     battery release tab to
     release the battery.

                                       3.	Use your measuring
                                           cup for your
                                           concentrate.




 2.	Slide the battery out.
                                       4.	Carefully pour
                                           in liquid and
                                           concentrate then
                                           refit the cup, making
                                           sure it is tightened
                                           securely.




                                       Note: The tank is marked for measuring up to 3.5 litres of liquid plus room
                                       for adding additional 120ml of concentrate that may be measured and poured
                                       from the cap.
OPERATION

4. CONTROLS & OPERATION

                                                                                 Adjustable Spray Pattern
         WARNING! THE PRODUCT IS INTENDED FOR
         OUTDOOR USE IN A WELL-VENTILATED AREA.                                  The shape of the spray can be adjusted from spot spraying to a wide angle
                                                                                 for a bigger area coverage. Rotate the adjustable nozzle to best suit your
                                                                                 application.
 Switching On and Off
 1.	To switch the sprayer ON,             2.	To switch the sprayer OFF, move   Stream - Loosen the nozzle.
     move the On/Off switch to                 the On/Off switch to position
     position “I” (On).                        “O” (Off).




                                                                                 Fan - Tighten the nozzle



                                                                                 Telescopic Extension Adjustment
                                                                                 1.	Loosen extension
                                                                                     nut.
 On Demand Spray Trigger                                                         2.	Pull the telescopic
                                                                                     extension to the
 1.	Press and hold trigger
                                                                                     desired length.
     down to begin spraying.
                                                                                 3.	Retighten the
                                                                                     extension nut.
 2.	Release trigger to stop
                                                                                 Spraying
     flow.
                                                                                 ¥ Always wear eye protection. Use personal protective equipment such as
                                                                                    dust mask, non-slip safety footwear and liquid resistant anti-slip gloves.
                                                                                 ¥ The garden sprayer may be operated with the handle resting in the handle
 The spray trigger can be locked in the ON position for continuous operation.       storage area or you may remove and hold the handle as shown.
                                                                                 ¥ Aim the sprayer nozzle
 1.	Press trigger to begin                                                         directly at the plants
     spraying.                                                                      or objects you wish to
                                                                                    spray.
                                                                                 ¥ Be a wear of splash
                                                                                    back, stand far enough
                                                                                    from the object being
                                                                                    sprayed to prevent the
                                                                                    spray splashing back
                                                                                    onto you.
 2.	Slide trigger forward to                                                    Note: Be aware
     lock down. Slide back                                                       of other people and animals in the area where you are to be operating the
     to unlock for normal                                                        garden sprayer, spray downwind.
     operation.
                                                                                 ¥ Never point the spray end of the wand at yourself or others.
                                                                                 ¥ Avoid spraying on windy days. Spray can be accidentally blown onto plants
                                                                                    or objects that should not be sprayed.
                                                                                 ¥ Always empty, clean, and drain the tank after every use as directed in the
                                                                                    Maintenance section.
                                                                                    WARNING! NEVER SET THE UNIT ON THE GROUND
                                                                                    DURING USE. AVOID THE SPRAYER AND BATTERY
                                                                                    FROM GETTING WET AT ALL TIMES. DO NOT SPRAY
                                                                                 NEAR OR DIRECTLY AT THE UNIT.
        WARNING! IF THE SPRAYER DOES NOT SWITCH
        ON OR SHOWS SIGNS OF DAMAGE, TAKE IT TO A
        AUTHORISED SERVICE AGENT. NEVER ATTEMPT TO                                       WARNING! IF THE UNIT AND OR BATTERY GETS
        OPEN/REPAIR THE TOOL YOURSELF.                                                   WET, STOP USING THE PRODUCT. WAIT UNTIL THE
                                                                                         PRODUCT IS COMPLETELY DRY BEFORE CONTINUING
                                                                                  USE.




                                                                                                                                   PXCWSS-018
MAINTENANCE                                                                                            TROUBLESHOOTING
                                                                                                     Problem Cause                                      Remedy
          WARNING! ALWAYS ENSURE THE TOOL IS SWITCHED
          OFF AND THE BATTERY IS REMOVED PRIOR TO ANY                                                Sprayer is not Battery is low in charge.           Charge battery
          MAINTENANCE.                                                                               starting
                                                                                                                    Battery not inserted                Insert battery pack correctly.
                                                                                                                     properly.
          WARNING! ALWAYS STORE AND DISPOSE OF                                                       Sprayer is not Nozzle blocked.                     Clean nozzle. Refer to "Cleaning the Nozzle"
          CHEMICALS PROPERLY. DISPOSAL OF CONTAMINATED                                               operating at                                         in the Maintenance section of this manual
          RINSE WATER SHOULD BE PERFORMED ACCORDING                                                  full capacity
          TO LOCAL ORDINANCES AND BYLAWS.

Cleaning the Tank
If there is any liquid left in the tank after spraying, the                                          Motor             Battery has no power.            Charge battery.
tank should be drained before cleaning.                                                              stops while
1. R emove the motor housing from the tank by lifting                                               spraying
    up and releasing the latches on each end of the
    unit.
2. D
    rain the contents through the fill area.
Note: Drain the contents back into the original
container. Do not store chemicals in the tank.
3. F ill tank approximately one-third full with clean
   water and a small amount of mild household
   detergent.                                                                                           SPARE PARTS
Note: Never use abrasive cleaning agents or
flammable chemicals to clean the tank.                                                                  Spare parts can be ordered from the Special Orders Desk at
                                                                                                        your local Bunnings Warehouse.
4. W
    ipe the outside of the tank with a clean, dry cloth.
                                                                                                        For further information, or any parts not listed here, visit
5. R eattach the motor housing to the tank and ensure the latches are closed.
                                                                                                        www.ozito.com.au or contact Ozito Customer Service:
6. F it a battery pack. Spray until the tank has been emptied. Make sure to direct the spray           Australia 1800 069 486
    toward an area that will not be damaged by the spray solution.
                                                                                                        New Zealand 0508 069 486
7. R epeat the procedure with clean water. It may be necessary to rinse the tank more
    than once, then drain again as directed above.                                                      E-mail: enquiries@ozito.com.au

8. A
    llow the unit to completely dry before reinstalling parts and storing the unit.



Cleaning the Nozzle
If the adjustable nozzle becomes clogged, use the
                                                                                                     DESCRIPTION OF SYMBOLS
following steps to clear the blockage.
1. U
    nscrew the nozzle fully from the spray wand.
2. P ush a small wire (not included) through the cross
   holes to clear any debris. Rinse the cross holes
    and nozzle with clean water.




                                                                                                                     Read instruction manual

                                                                                                                     Regulator compliance mark                       Wear eye protection.


                                                                                                                     Wear a breathing mask                           Wear protective gloves.


                                                                                                                     Wear safety footwear


                                                                                                                     Do not use in the rain or leave the weed sprayer outdoors while raining.
3. W
    ipe the nozzle and cross holes with a clean dry cloth and reinstall the nozzle.


Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of
the garden sprayer by an unauthorised person or by mishandling of the garden sprayer. This tool is
designed for DIY use - use in commercial or industrial environments will void the warranty.
                                                                                                       CARING FOR THE ENVIRONMENT
                                                                                                                   Power tools that are no longer usable should not be disposed of with household
                                                                                                                   waste but in an environmentally friendly way. Please recycle where facilities exist.
                                                                                                                   Check with your local council authority for recycling advice.


                                                                                                                   Recycling packaging reduces the need for landfill and raw materials. Reuse of
                                                                                                                   recycled material decreases pollution in the environment. Please recycle packaging
                                                                                                                   where facilities exist. Check with your local council authority for recycling advice.
ELECTRICAL SAFETY
            WARNING! When using mains-powered tools, basic safety precautions, including                                                  If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard.
           the following, should always be followed to reduce risk of fire, electric shock, personal                                      Note: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is for
           injury and material damage.                                                                                                    added protection against injury resulting from a possible electrical insulation failure within the tool.
 Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before operating the tool.            The power supply for this products charger should be protected by a residual current device (rated at 30mA or less). A residual current
 Save these instructions and other documents supplied with this tool for future reference.                                                device reduces the risk of electric shock.
 The charger has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating
 plate.
 Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.

              This tools charger is double insulated in therefore no earth wire is required.




            GENERAL POWER TOOL SAFETY WARNINGS
          WARNING! Read all safety warnings and all instructions. Failure to follow the                                              f.    ress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
                                                                                                                                          D
          warnings and instructions may result in electric shock, fire and/or serious injury.                                             and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving
          Save all warnings and instructions for future reference. The term “power                                                        parts.
tool” in the warnings refers to your mains-operated (corded) power tool or                                                           g. 	If devices are provided for the connection of dust extraction and collection
battery-operated (cordless) power tool.                                                                                                   facilities, ensure these are connected and properly used. Use of dust collection can reduce
1. Work area safety                                                                                                                       dust-related hazards.
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.                                                     4. Power tool use and care
b. Do not operate power tools in explosive atmospheres, such as in the presence of                                                  a. Do not force the power tool. Use the correct power tool for your application. The
     flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.                                      correct power tool will do the job better and safer at the rate for which it was designed.
c. Keep children and bystanders away while operating a power tool. Distractions can cause                                           b. 	Do not use the power tool if the switch does not turn it on and off. Any power tool that
     you to lose control.                                                                                                                 cannot be controlled with the switch is dangerous and must be repaired.
2. Electrical safety                                                                                                                 c. Disconnect the plug from the power source and/or the battery pack from the
a. Power tool plugs must match the outlet. Never modify the plug in any way. Do                                                          power tool before making any adjustments, changing accessories, or storing
     not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and                                                  power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
     matching outlets will reduce risk of electric shock.                                                                            d. 	Store idle power tools out of the reach of children and do not allow persons
b. 	Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,                                                      unfamiliar with the power tool or these instructions to operate the power tool.
     ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.                          Power tools are dangerous in the hands of untrained users.
c. 	Do not expose power tools to rain or wet conditions. Water entering a power tool will                                           e. 	Maintain power tools. Check for misalignment or binding of moving parts,
     increase the risk of electric shock.                                                                                                 breakage of parts and any other condition that may affect the power tool’s
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the                                                     operation. If damaged, have the power tool repaired before use. Many accidents are
     power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or                                                   caused by poorly maintained power tools.
     entangled cords increase the risk of electric shock.                                                                            f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
e. 	When operating a power tool outdoors, use an extension cord suitable for                                                             less likely to bind and are easier to control.
     outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.                                         g. 	Use the power tool, accessories and tool bits etc. in accordance with these
f. If operating a power tool in a damp location is unavoidable, use a residual current                                                   instructions, taking into account the working conditions and the work to be
     device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.                                                     performed. Use of the power tool for operations different from those intended could result in a hazardous
3. Personal safety                                                                                                                        situation.
a. Stay alert, watch what you are doing and use common sense when operating a                                                       5. Battery tool use and care
     power tool. Do not use a power tool while you are tired or under the influence of                                               a.	Recharge only with the charger specified by the manufacturer. A charger that is suitable
     drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious                              for one type of battery pack may create a risk of fire when used with another battery pack.
     personal injury.                                                                                                                b. 	Use power tools only with specifically designated battery packs. Use of any other battery
b.	 Use personal protective equipment. Always wear eye protection. Protective equipment                                                  packs may create a risk of injury and fire.
     such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce           c. When battery pack is not in use, keep it away from other metal objects, like
     personal injuries.                                                                                                                   paper clips, coins, keys, nails, screws or other small metal objects, that can make a
                                                                                                                                          connection from one terminal to another. Shorting the battery terminals together may cause burns or a
c. Prevent unintentional starting. Ensure the switch is in the off-position before
                                                                                                                                          fire.
     connecting to power source and/or battery pack, picking up or carrying the tool.
                                                                                                                                     d. 	Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
     Carrying power tools with your finger on the switch or energising power tools that have the switch on invites
                                                                                                                                          contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
     accidents.
                                                                                                                                          medical help. Liquid ejected from the battery may cause irritation or burns.
d. 	Remove any adjusting key or wrench before turning the power tool on. A wrench or a                                              6. Service
     key left attached to a rotating part of the power tool may result in personal injury.                                           a. Have your power tool serviced by a qualified repair person using only identical
e. 	Do not overreach. Keep proper footing and balance at all times. This enables better                                                  replacement parts. This will ensure that the safety of the power tool is maintained.
     control of the power tool in unexpected situations.




            WEED SPRAYER SAFETY WARNINGS
¥.	Never alloy children with reduced physical, sensory or mental capabilities or lack of experience and                                  ¥ 	Aim the nozzle directly at the plants or objects you intend to spray.
    knowledge or people unfamiliar with these instructions to use the product.                                                            ¥ 	Do not pour hot or boiling liquids into the spray tank. These can weaken or damage the hose or spray
• 	Do not spray flammable liquids, such as petrol, to reduce the risk of fire or explosion.                                                  tank.
¥.	Always follow the chemical manufacturer’s instructions printed on their product labeling for use,                                     ¥ 	Do not overfill the tank.
    cleaning, and storage. Chemicals should be stored out of the reach of children.                                                       ¥ 	Always check for leaks. If any are found, correct them before using the product.
¥.	Do not spray any material where the hazard is not known.                                                                              ¥ 	The spray area must be well ventilated.
¥ 	Do not spray where spark, flame, or other source of ignition is present.                                                              ¥ 	Always inspect both the inside and outside of the product before each use.
¥ 	Do not spray in the direction of people or animals. Always spray downwind.                                                            ¥ 	Liquids to be sprayed must be as thin as water. Thicker liquids will not spray properly.
¥ 	Do not smoke, eat, or drink while using the product.                                                                                  ¥ 	Spray materials may be premixed and poured into the spray tank using a funnel, if necessary.
¥ 	Do not discharge directly against skin.                                                                                               ¥.	When using a measuring container other than the measuring cup, or when using a funnel to fill the
¥ 	Do not let the spray materials come in contact with skin. If contact does occur, wash immediately with                                    tank, thoroughly clean and rinse these items after use. When premixing spray materials, rinse the
    soap and plenty of water.                                                                                                                 container used for mixing.
¥	To reduce exposure to spray materials, wear approved safety equipment, such as face mask designed                                      ¥ 	Ensure that the spray materials are directed at an area that will not be damaged by the spray
   for spraying, gloves, and other appropriate protective equipment.                                                                          materials.
¥ 	Do not use flammable solvents or abrasive cleaning agents to clean the product.                                                       •    Do not spray material onto the unit.
¥ 	Be aware of any hazards presented by the spray materials. Before using any pesticide or other                                         ¥ 	Avoid spraying on windy days. The spray materials can be accidentally blown onto plants or objects
    spray materials with the product, carefully read the label on the original container and follow the                                       that should not be sprayed.
    instructions.                                                                                                                         ¥ 	Keep spray materials away from eyes. If spray materials come in contact with the eyes, wash them
¥ 	Keep the area clear of all bystanders, children, and pets while spraying.                                                                 immediately with clean water. If irritation is still present, immediately seek medical help.
¥ 	Remember to properly replace and tighten the spray tank cover after pouring liquid into the spray tank.                               ¥ 	The product may be operated with the spray wand handle resting in the cradle, or may be removed
¥ 	Use only consumer-grade water-based lawn and garden chemicals.                                                                            from the cradle and be held by the operator.
¥ 	Do not use commercial-grade chemicals or chemicals for commercial or industrial purposes.                                             ¥ 	After every use, thoroughly wash your hands and any area where skin has been exposed to the spray.
¥ 	Do not use caustic (alkali) self-heating or corrosive (acid) liquids with the product. These can corrode                              ¥ 	Maintain the product. Thoroughly inspect both the inside and outside of the product and examine the
    metal parts or weaken the tank and hose.                                                                                                  components before each use. Check for cracked and deteriorated hoses, leaks, clogged nozzles, and
                                                                                                                                              missing or damaged parts. If damaged, have the product repaired before use. Many accidents are
¥ 	Do not leave residue or spray material in the spray tank after using the product. Clean after each use.                                   caused by poorly maintained products.
¥ 	Electric shock hazard. Do not spray towards electrical outlets.                                                                       ¥ 	Remove the battery from the product before draining, cleaning, or storing to avoid accidental starting.
BATTERY SAFETY WARNINGS
                                                                                                           THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR
                                                                                                           YOUR BATTERY CHARGER.

                                                                                                           1.     Before using the charger read all instructions and cautionary markings on the charger, battery
                                                                                                                  pack and the product using the battery pack.
                                                                                                           2.     This charger is not intended for any uses other than charging rechargeable batteries. Any other
                                                                                                                  use may result in risk of fire, electric shock or electrocution.
                                                                                                           3.     Do not place any object on top of the charger or place the charger on a soft surface that may
                                                                                                                  result in excessive internal heat. Place the charger in a position away from any heat source.
                                                                                                           4.     To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when
                                                                                                                  disconnecting the charger.


1.5Ah BATTERY
                                                                                                           5.     Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise
                                                                                                                  subjected to damage or stress.
                                                                                                           6.     An extension cord should not be used unless absolutely necessary. Use of an improper extension cord
                                                                                                                  could result in the risk of fire, electric shock or electrocution.
INSTRUCTION MANUAL                                                                                         7.     Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in
                                                                                                                  any way. Have it checked by an electrician or power tool repairer.
                                                                                                           8.     Do not disassemble charger. Take it to an electrician or power tool repairer when service or repair
SPECIFICATIONS                                                                                             9.
                                                                                                                  is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.
                                                                                                                  To reduce risk of electric shock, unplug the charger from the outlet before attempting any clean-
Input:		                18V                                                                                       ing. Removing the battery pack will not reduce this risk.
                                                                                                           10.    Never attempt to connect 2 chargers together.
Battery Power:          1.5Ah Li-ion                                                                       11.    DO NOT store or use the tool and battery pack in locations where the temperature may reach or exceed
Charge Times:           40min (Multi Battery Charger)                                                             40ºC (such as inside sheds or metal buildings in summer).
		                      30min (Fast Charger)                                                               12.    The charger is designed to operate on standard household electrical power (240 volts). Do not
		                      60min (Standard Charger)                                                                  attempt to use it on any other voltage!
                                                                                                           13.    The battery pack is not fully charged out of the carton. First read the safety instructions and then
		                      2Hr (Eco Charger)                                                                         follow the charging notes and procedures.
Weight:		               0.35kg                                                                             14.    The longest life and best performance can be obtained if the battery pack is charged when the
                                                                                                                  air temperature is between 18 - 24ºC. Do not charge the battery pack in an air temperature below
ozito.com.au                                                                                                      10ºC or above 40ºC. This is important and will prevent damage to the battery pack.
                                                                                                           15.    Do not incinerate the battery pack even if it is seriously damaged or is completely worn out. The
                                                                                                                  battery can explode in a fire.
                                                                                                           16.    Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks
                                                                                                                  or cracks, immediately discontinue use and do not recharge.
                                                                                                           17.    During charging, the battery must be placed in a well ventilated area.



1. Battery
2. Battery Release Button
3. Charge Indicator Button
                                        1        2         3

                                                                                                                      ELECTRICAL SAFETY
                                                                           PXBP-150                                WARNING! When using mains-powered tools, basic safety precautions, including the following,
                                                                                                                   should always be followed to reduce risk of fire, electric shock, personal injury and material
                                                                                                                   damage.
                                                                                                          Read the whole manual carefully and make sure you know how to switch the tool off in an emergency,
                                                                                                          before operating the tool.
                                                                                                          Save these instructions and other documents supplied with this tool for future reference.
  DESCRIPTION OF SYMBOLS                                                                                  Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.

                                                                                                                     This tools charger is double insulated therefore no earth wire is required.

     V      Volts                              Hz       Hertz
                                                                                                          If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
    ac/~     Alternating Current                W       Watts                                             qualified persons in order to avoid hazard.
    dc                                                                                                    Note: Double insulation does not take the place of normal safety precautions when operating this tool.
             Direct Current                    Ah       Amp Hour                                          The insulation system is for added protection against injury resulting from a possible electrical insulation
                                                                                                          failure within the tool.
    mA       Milliamperes                               Warning                                           Using an Extension Lead
                                                        Do not use or store battery in                    Always use an approved extension lead suitable for the power input of this tool. Before use, inspect
             Lithium Ion Battery                                                                          the extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or
                                                        temperatures exceeding 50ºC                       defective.
                                                                                                          When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead
             Recycle Battery                            Do not put in the rubbish                         not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire
                                                                                                          and electric shock.
                                                                                                          To reduce the risk of electric shock, we recommend the use of a residual current device (rated 30mA or
             Do not incinerate                          Do not get battery wet                            less).
                                                                                                          This appliance is not intended for use by persons (including children) with reduced physical, sensory or
                                                                                                          mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
                                                                                                          instruction concerning use of the appliance by a person responsible for their safety.
                                                                                                          Children should be supervised to ensure that they do not play with the appliance.
   CARING FOR THE ENVIRONMENT
                  Power tools that are no longer usable should not be disposed of with household
                  waste but in an environmentally friendly way. Please recycle where facilities exist.
                  Check with your local council authority for recycling advice.

                  Recycling packaging reduces the need for landfill and raw materials. Reuse of
                  recycled material decreases pollution in the environment. Please recycle packaging
                  where facilities exist. Check with your local council authority for recycling advice.
1. OPERATION                                                                                                                  WARRANTY
                                                                                          IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
Only use the battery pack with Ozito Power X Change 18V cordless products.                MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
                                                                                          WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
CHARGING YOUR LITHIUM ION BATTERY
                                                                                          RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
This battery has been shipped in a low charge condition, and requires charging prior to
                                                                                          OUR CUSTOMER SERVICE HELPLINE:
use. Allow several cycles of charging and discharging (through use with a compatible
tool) for the battery to reach its optimum performance / runtime.
                                                                                          Australia 1800 069 486
This battery is compatible with chargers from the 18V Ozito Power X Change range
                                                                                          New Zealand 0508 069 486
available through your local Bunnings Warehouse: Product availability may differ.
•	
  PXMBC-002 Multi Battery Charger
•	
  PXCG-030 Fast Charger
•	
  PXCG-060 Standard Charger
•	
  PXCG-120 Eco Charger                                                                    TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
                                                                                          NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
                                                                                          SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
1.     Insert the power plug of the charger into the mains socket outlet. The green LED   ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
       will begin to flash when properly connected to power supply.
2.     Insert the battery pack into the battery charger .                                 WARRANTY POLICY OR PROCEDURE.
3.     Remove battery from the charger once fully charged. Disconnect the charger from
       the power supply.

Note: The battery pack can become a little warm during the charging. This is normal       The benefits provided under this warranty are in addition to other rights and remedies
                                                                                          which are available to you at law.
If the battery pack fails to charge, check:
              if there is voltage at the socket outlet                                    Our goods come with guarantees that cannot be excluded at law. You are entitled to a
              that the battery and charger are properly connected.                        replacement or refund for a major failure and for compensation for any other reasonably
                                                                                          foreseeable loss or damage. You are also entitled to have the goods repaired or replaced
If the battery pack still fails to charge, please contact our customer service center.    if the goods fail to be of acceptable quality and the failure does not amount to a major
                                                                                          failure.
                                                                                          Generally you will be responsible for all costs associated with a claim under this
                                                                                          warranty, however, where you have suffered any additional direct loss as a result of a
 BATTERY CHARGE INDICATOR                                                                 defective product you may be able to claim such expenses by contacting our customer
                                                                                          service helpline above.
 The purchased battery is equipped with a
 battery charge indicator to show the state of
 the battery charge.
 Press the charge indicator button and look to
                                                                                          36 MONTH REPLACEMENT WARRANTY
 see which LED lights.
                                                                                          Your product is guaranteed for a period of 36 months from the original date of purchase and
                                                                                          is intended for DIY (Do It Yourself) use only. If a product is defective it will be replaced in
                                                                                          accordance with the terms of this warranty. Warranty excludes consumable parts.
                         Battery requires immediate charging
                                                                                          WARNING
                         Low state of charge, requires charging soon.
                                                                                          The following actions will result in the warranty being void.
                         Mid state of charge                                              • If the tool has been operated on a supply voltage other than that specified on the
                                                                                              tool.
                                                                                          • If the tool shows signs of damage or defects caused by or resulting from abuse,
                         Full state of charge.
                                                                                              accidents or alterations.
                                                                                          • Failure to perform maintenance as set out within the instruction manual.
 Note: The battery needs to be removed from the tool to check the state of charge.        • If the tool is disassembled or tampered with in any way.



 BATTERY PROTECTION SYSTEM                                                                                                                                                            0318
 The tool is equipped with a battery protection system, which helps to ensure longevity
 of the battery.
 The output power automatically cuts off during operation when the tool and/or battery
 are placed under the following situations:
 • When the tool is overloaded:
 	If this occurs, release the trigger switch and remove causes of overload, then pull                                      ONLINE MANUAL
   the switch trigger again to restart.                                                                                     Scan this QR Code with your mobile
 • When the remaining battery capacity becomes low:                                                                         device to take you to the online
                                                                                                                            manual.
     Recharge the battery pack.
 Note: T he battery protection system does not in any way damage the tool.
 Note: T he indicated capacity may be lower than the actual level during use or
       immediately after using the tool.
                                                                                                                                     OZITO Australia/New Zealand (Head Office)
                                                                                                                           1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.




                                                                                                                                                                 PXBP-150
CHARGER SAFETY WARNINGS
                                                                                                          THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR
                                                                                                          YOUR BATTERY CHARGER.

                                                                                                          1.     Before using the charger read all instructions and cautionary markings on the charger, battery
                                                                                                                 pack and the product using the battery pack.
                                                                                                          2.     This charger is not intended for any uses other than charging rechargeable batteries. Any other
                                                                                                                 use may result in risk of fire, electric shock or electrocution.
                                                                                                          3.     Do not place any object on top of the charger or place the charger on a soft surface that may
                                                                                                                 result in excessive internal heat. Place the charger in a position away from any heat source.
                                                                                                          4.     To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when
                                                                                                                 disconnecting the charger.
                                                                                                          5.     Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise


ECO CHARGER                                                                                               6.

                                                                                                          7.
                                                                                                                 subjected to damage or stress.
                                                                                                                 An extension cord should not be used unless absolutely necessary. Use of an improper extension cord
                                                                                                                 could result in the risk of fire, electric shock or electrocution.
                                                                                                                 Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in
INSTRUCTION MANUAL                                                                                               any way. Have it checked by an electrician or power tool repairer.
                                                                                                          8.     Do not disassemble charger. Take it to an electrician or power tool repairer when service or repair
                                                                                                                 is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.
SPECIFICATIONS                                                                                            9.     To reduce risk of electric shock, unplug the charger from the outlet before attempting any clean-
                                                                                                                 ing. Removing the battery pack will not reduce this risk.
Input:		                 100-240V AC 50/60Hz                                                              10.    Never attempt to connect 2 chargers together.
Output:		                21V DC, 800mA                                                                    11.    DO NOT store or use the tool and battery pack in locations where the temperature may reach or exceed
Battery Charge Time:     2.0Hrs - PXBP-150 (18V 1.5Ah)                                                           40ºC (such as inside sheds or metal buildings in summer).
                                                                                                          12.    The charger is designed to operate on standard household electrical power (240 volts). Do not
		                       2.5Hrs - PXBP-200 (18V 2.0Ah)                                                           attempt to use it on any other voltage!
		                       4.0Hrs - PXBP-300 (18V 3.0Ah)                                                    13.    The battery pack is not fully charged out of the carton. First read the safety instructions and then
		                       5.0Hrs - PXBP-400 (18V 4.0Ah)                                                           follow the charging notes and procedures.
		                       6.5Hrs - PXBP-520 (18V 5.2Ah)                                                    14.    The longest life and best performance can be obtained if the battery pack is charged when the
                                                                                                                 air temperature is between 18 - 24ºC. Do not charge the battery pack in an air temperature below
                                                                                                                 10ºC or above 40ºC. This is important and will prevent damage to the battery pack.
ozito.com.au                                                                                              15.    Do not incinerate the battery pack even if it is seriously damaged or is completely worn out. The
                                                                                                                 battery can explode in a fire.
                                                                                                          16.    Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks
                                                                                                                 or cracks, immediately discontinue use and do not recharge.
                                                                                                          17.    During charging, the battery must be placed in a well ventilated area.



1. Charging Cradle
2. Charging Adaptor

                                                         1                            2
                                                                                                                    ELECTRICAL SAFETY
                                                                                                                   WARNING! When using mains-powered tools, basic safety
                                                                      PXCG-120                                    precautions, including the following, should always be followed to
                                                                                                          reduce risk of fire, electric shock, personal injury and material damage.
                                                                                                          Read the whole manual carefully and make sure you know how to switch the tool off in an emergency,
                                                                                                          before operating the tool.
                                                                                                          Save these instructions and other documents supplied with this tool for future reference.
                                                                                                          Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.
  DESCRIPTION OF SYMBOLS                                                                                             This tools charger is double insulated in accordance with AS/NZS 60335.1
                                                                                                                     therefore no earth wire is required.

      V       Volts                                    Hz        Hertz
                                                                                                          If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
                                                                                                          qualified persons in order to avoid hazard.
      A       Amps                                   Ah          Amp Hour                                 Note: Double insulation does not take the place of normal safety precautions when operating this tool.
                                                                                                          The insulation system is for added protection against injury resulting from a possible electrical insulation
                                                                                                          failure within the tool.
              Read instruction manual                            Double insulated                         Using an Extension Lead
                                                                                                          Always use an approved extension lead suitable for the power input of this tool. Before use, inspect
                                                                                                          the extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or
                                                                 Indoor use only                          defective.
              Regulator compliance mark
                                                                                                          When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead
                                                                                                          not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire
                                                                 Do not dispose of in rubbish             and electric shock.
              Thermal cut out protection
                                                                                                          To reduce the risk of electric shock, we recommend the use of a residual current device (rated 30mA or
                                                                                                          less).
                                                                                                          This appliance is not intended for use by persons (including children) with reduced physical, sensory or
                                                                                                          mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
                                                                                                          instruction concerning use of the appliance by a person responsible for their safety.

   CARING FOR THE ENVIRONMENT                                                                             Children should be supervised to ensure that they do not play with the appliance.



                  Power tools that are no longer usable should not be disposed of with household
                  waste but in an environmentally friendly way. Please recycle where facilities exist.
                  Check with your local council authority for recycling advice.
                                                                                                                                         ONLINE MANUAL
                                                                                                                                         Scan this QR Code with your
                  Recycling packaging reduces the need for landfill and raw materials. Reuse of                                          mobile device to take you to the
                  recycled material decreases pollution in the environment. Please recycle packaging
                  where facilities exist. Check with your local council authority for recycling advice.
                                                                                                                                         online manual.
1. CHARGING A BATTERY                                                                    2. MAINTENANCE

                                                                                         •	Disconnect the charger from power source before cleaning.
        CAUTION: THE CHARGER SHOULD BE PROTECTED BY
                                                                                         • Keep the charger in a dry place out of reach of children.
        A RESIDUAL CURRENT DEVICE (RATED AT 30MA OR
        LESS).                                                                           •	If the enclosure of the charger requires cleaning, do not use solvents. Use a dry, soft
                                                                                            cloth only to wipe down the surface. Never let any liquid get inside the charger; never
                                                                                            immerse any part of the drill into a charger.
1 	Connect the charger into a mains power outlet.                                       •	
                                                                                           There are no other parts inside the charger which require maintenance.Do not
                                                                                           take the charger apart. If the charger is damaged, contact your supplier or the
                                                                                           manufacturer.
2	The charger LED will flash green
   showing power is being supplied
   to the charger.                                                                                                         WARRANTY
                                                                                         IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
                                                                                         MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
3	With the battery sitting on a flat                                                    WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
   surface, align the raised ribs on                                                     RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
   the battery with the recess in the                                                    OUR CUSTOMER SERVICE HELPLINE:
   charger and slide onto the battery
   ensuring a firm connection.                                                           Australia 1800 069 486
                                                                                         New Zealand 0508 069 486


                                                                                         TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
4 The charger LED will illuminate red signifying that the battery is charging.
                                                                                         NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
                                                                                         SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
Note: The battery will not develop a memory, it does not have to be fully                ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
discharged before recharging                                                             WARRANTY POLICY OR PROCEDURE.

5 When removing the charger from                                                        The benefits provided under this warranty are in addition to other rights and
  the battery, first press the battery                                                   remedies which are available to you at law.
  release tab, then slide the charger                                                    Our goods come with guarantees that cannot be excluded at law. You are
  from its position.                                                                     entitled to a replacement or refund for a major failure and for compensation
                                                                                         for any other reasonably foreseeable loss or damage. You are also entitled to
                                                                                         have the goods repaired or replaced if the goods fail to be of acceptable
                                                                                         quality and the failure does not amount to a major failure.
                                                                                         Generally you will be responsible for all costs associated with a claim under
                                                                                         this warranty, however, where you have suffered any additional direct loss as
                                                                                         a result of a defective product you may be able to claim such expenses by
                                                                                         contacting our customer service helpline above.

 Charger LED Indicator
 LED Indicator                Situation
                                                                                         36 MONTH REPLACEMENT WARRANTY
                                                                                         Your product is guaranteed for a period of 36 months from the original date
 GREEN (Flashing)             Stand By (no battery pack is inserted)
                                                                                         of purchase and is intended for DIY (Do It Yourself) use only. If a product is
 RED (Illuminated)            Battery is charging (low charge)                           defective it will be replaced in accordance with the terms of this warranty.
 GREEN (Illuminated)          Battery is fully charged                                   Warranty excludes consumable parts.
 RED (Flashing)               Battery or Charger fault
 RED & GREEN (Flashing)       Battery pack is too hot or too cold (remove battery from
                              charger and store at room temperature 20ºC. Insert
                                                                                         WARNING
                              battery again when at correct charging temperature). If    The following actions will result in the warranty being void.
                              this happens again, the battery is defective and needs     • If the tool has been operated on a supply voltage other than that specified
                              to be replaced.                                               on the tool.
                                                                                         • If the tool shows signs of damage or defects caused by or resulting from
                                                                                            abuse, accidents or alterations.
                                                                                         • Failure to perform maintenance as set out within the instruction manual.
                                                                                         • If the tool is disassembled or tampered with in any way.




                                                                                                                              OZITO Australia/New Zealand (Head Office)
                                                                                                                        1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.




                                                                                                                                                             PXCG-120
Next part ... Cancel