2020 Digital Catalog Decorative Concrete Finishes Concrete Restoration Interior Flooring Systems Industrial Floor Coatings - Elite Crete Systems
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
2020 Digital Catalog
Products, Systems, & Solutions for:
Decorative Concrete Finishes • Concrete Restoration
Interior Flooring Systems • Industrial Floor Coatings
Engineered High Performance Surfaces & Flooring
Engineered High Performance Surfaces & Flooring
1151 Transport Drive, Valparaiso, IN 46383
Toll Free 888.323.4445 ● P 219.465.7671
F 219.531.0898 ● www.elitecrete.com
Even in today’s economic times, the unique industry that we are leading is continuing to thrive with anticipated higher than
average growth in the coming years. Our industry so diverse that it is often said that it is near recession proof due to the
versatility of our products & systems and where they are specified and used.
To better understand that scope of work that our products are used in we will detail the descriptions and use of each in
two very distinctive CSI (Construction Specification Institute) Divisions:
CSI Division 3 – Concrete:
Decorative Concrete Finishes
Decorative Concrete Overlayments
Concrete Surface Restoration
Colored & Stained Concrete
Concrete Topping and Resurfacing
Concrete Sealers & Protective Topcoats
CSI Division 9 – Finishes:
Fluid Applied Floor Coatings
Resinous Flooring
Epoxy/Urethane/Polyaspartic Flooring
Customized, Beautiful, Seamless Flooring
Industrial & Manufacturing Area Flooring
Specialized Food & Beverage Urethane Cement Flooring
Advanced technologies in polymer modified cementitious coatings, reactive/antiquing stain products, super smooth &
seamless floor coatings, ultra durable sealer and industrial coating options are leading the growth where full depth
stamped concrete, colored concrete, terrazzo, tile, hardwood and other floor coating products were once the extent of the
exterior and interior surface options.
As the leader in decorative concrete, interior flooring and industrial coating industry, we not only have one of the most
extensive product lines but we are also proud to boast one of the most well-known, installed, specified and accepted line
of products and systems in the industry.
From one company to another, we understand the importance of time as it relates to profitability. Since product costs are
generally fixed and extremely minimal in the decorative concrete finishes and interior flooring industry, when you lose
time, you lose money. That’s why we continually strive to engineer products and systems that meet and exceed the
highest standards of reliability, ease of use, durability and cost effectiveness.
Once you have reviewed all of the enclosed information, give us a call to arrange; training seminar information for
contractors or product specification assistance for architects and property owner. You will also receive a full product
catalog on a USB flash drive or get answers to any questions that you might have. We also urge you to visit our website at
www.elitecrete.com which provides much more detailed information.
Kindest Regards,
Technical Engineering & Market Development Staff
Elite Crete Systems, Inc.
REFLECTOR™ Enhancer
Flooring System
CSI Division 9: Finishes - Flooring
Engineered High Performance Surfaces & Flooring
REFLECTOR™ Enhancer Flooring Systems PHYSICAL PROPERTIES
are specialty, high build, self leveling, fluid applied floor coatings. (@ 73°
F / 23°
C, 7 day ambient cure as a coating)
Engineered for residential and commercial applications where a
durable, long lasting, aesthetically unique, easy to maintain and PROPERTY TEST RESULT
completely custom floor is required. VOC Content N/A 0 g/l
Shore D Hardness ASTM D-2240 72-83
Due to the unique and unrepeatable nature of these flooring
Water Absorption (2hr boil) ASTM D-570 0.03-0.19 %
systems, consult with a technical representative before installing
Toxicity N/A None*
or specifying.
Heat Distortion Temperature ASTM D-648 120-130 F / 55 C
Compressive Strength ASTM D-695 7,500-13,400 psi
TYPICAL AREAS OF USE Tensile Strength ASTM D-638 2,100-4,200 psi
• Retail stores Flexural Strength ASTM D-790 4,500-6,500 psi
• Shopping malls Abrasion Resistance ** ASTM D-4060 9-30 mg loss
• Automobile showrooms Slant Shear ASTM C-882 100% concrete failure
• Restaurants & bars Flammability ASTM D-635 Self-extinguishing
• Hotels & casinos Flame Spread Rate (NFPA 101) ASTM E-84 Class A
• Art galleries & museums Elongation at Break ASTM D-638 4.5 % minimum
• Collegiate & professional sports complexes Perm Rating ASTM E-96-13 >0.10 @ 16 mils. Class 1
Chemical resistance Contact technical representative for chart
ADVANTAGES Coef f icient of Friction Adjusted per requirement. Generally 0.50 to 0.80
COF Guidelines: ADA Flat Surfaces 0.60
• Ease of maintenance
ADA Inclined Surfaces 0.80
• Aesthetic improvements
OSHA 0.50
• Hard and abrasion resistant
NFPA 0.68
• VOC free - CA 01350 air quality compliant
* FDA, USDA, & CIFA Acceptable ** CS-17 Wheel, 1 KG load, 1,000 cycles
• Stain and chemical resistant
• Anti-microbial
• Satin or gloss finish
• Fast set available for quicker turn around time
• Special colors can match design or preferred colors
SPECIFICATION OVERVIEW
• Name: REFLECTOR™ Enhancer Flooring System
• Finish: Gloss or satin
• Cured thickness: @ 40 to 65 mils
• Surface preparation and detailed application
instructions per manufacturer
• Manufacturer: Elite Crete Systems, Inc. +1-219-465-7671
SAMPLE COLOR CHART
Brass Bubblegum Cairo Canary
Charcoal Pearl Cof fee Concord Grape Copper Elite Crete Systems, Inc.
1061 Transport Drive
Valparaiso, Indiana 46383
Phone: +1.219.465.7671 Fax: +1.219.531.0898
Dark Green Elite Crete Blue Green Apple Gunmetal
Toll Free: 888-323-4445
Email: info@elitecrete.com
Lilac Orange Gold Red Yellow Rialto
www.elitecrete.com
The information herein is general information to assist our customers in determining
whether our products are suitable for their specific applications. Our products are intended
for sale to commercial and industrial customers. We require that customers should inspect
Russet Sherbet Sky Blue Titanium and test our products before use to satisfy themselves as to the content and suitability for
the applications they intend to use our products for. Nothing herein shall constitute any
NOTE: The colors depicted on this technical document may not illustrate the exact color. warranty expressed or implied, including any warranty of merchantability or fitness for a
Contact a technical support representative for a more accurate color sample. Custom particular purpose, nor is replacement of our materials and in no event shall we be liable for
colors availible upon request. incidental or consequential damages.
HERMETIC™ Neat
Flooring System
CSI Division 9: Finishes - Flooring
Engineered High Performance Surfaces & Flooring
HERMETIC™ Neat Floor is a high build, self leveling, PHYSICAL PROPERTIES
clear or pigmented resinous flooring system engineered for (@ 73°
F / 23°
C, 7 day ambient cure as a coating)
industrial applications.
PROPERTY TEST RESULT
VOC Content N/A 0 g/l
TYPICAL AREAS OF USE
Shore D Hardness ASTM D-2240 72-83
HERMETIC™ Neat Flooring Systems is intended for floors subject Water Absorption (2hr boil) ASTM D-570 0.03-0.19 %
to medium to high foot traf f ic, fork lift and rubber wheel carts.
Toxicity N/A None*
Typical uses include:
Heat Distortion Temperature ASTM D-648 120-130 F / 55 C
• Warehouses Compressive Strength ASTM D-695 7,500-13,400 psi
• Manufacturing areas Tensile Strength ASTM D-638 2,100-4,200 psi
• Laboratories & clean rooms Flexural Strength ASTM D-790 4,500-6,500 psi
• Automobile service areas & garages Abrasion Resistance ** ASTM D-4060 9-30 mg loss
• Exhibition halls Slant Shear ASTM C-882 100% concrete failure
• Medical & educational facilities Flammability ASTM D-635 Self-extinguishing
• Aircraft hangars Flame Spread Rate (NFPA 101) ASTM E-84 Class A
Elongation at Break ASTM D-638 4.5 % minimum
ADVANTAGES Perm Rating ASTM E-96-13 >0.10 @ 16 mils. Class 1
Chemical resistance Contact technical representative for chart
• Ease of maintenance
Coef f icient of Friction Adjusted per requirement. Generally 0.50 to 0.80
• Protects the substrate
COF Guidelines: ADA Flat Surfaces 0.60
• Aesthetic improvements
ADA Inclined Surfaces 0.80
• Increases the strength of the substrate
OSHA 0.50
• Hard and abrasion resistant
NFPA 0.68
• VOC free - CA 01350 air quality compliant
* FDA, USDA, & CIFA Acceptable ** CS-17 Wheel, 1 KG load, 1,000 cycles
• Stain and chemical resistant
• Anti-microbial
• Satin or gloss finish
• Fast set available for quicker turn around time
• Electrostatic dissipative finish is optional
SPECIFICATION OVERVIEW
• Name: HERMETIC™ Neat Floor
• Finish: Gloss or satin
• Cured thickness: @ 40 to 65 mils
• Surface preparation and detailed application
instructions per manufacturer
• Manufacturer: Elite Crete Systems, Inc. +1-219-465-7671
SAMPLE COLOR CHART
Light Gray Medium Gray Dark Gray
Tan Brown White Elite Crete Systems, Inc.
1061 Transport Drive
Valparaiso, Indiana 46383
Phone: +1.219.465.7671 Fax: +1.219.531.0898
Black Forest Green Country Blue
Toll Free: 888-323-4445
Email: info@elitecrete.com
www.elitecrete.com
Army Green Tile Red Burnt Orange
The information herein is general information to assist our customers in determining
whether our products are suitable for their specific applications. Our products are intended
for sale to commercial and industrial customers. We require that customers should inspect
Nevada Clay Safety Yellow Brick Red * and test our products before use to satisfy themselves as to the content and suitability for
the applications they intend to use our products for. Nothing herein shall constitute any
NOTE: The colors depicted on this technical document may not illustrate the exact color. warranty expressed or implied, including any warranty of merchantability or fitness for a
Contact a technical support representative for a more accurate color sample. Custom particular purpose, nor is replacement of our materials and in no event shall we be liable for
colors availible upon request. * Novalac Only incidental or consequential damages.
HERMETIC™ Flake
Flooring System
CSI Division 9: Finishes - Flooring
Engineered High Performance Surfaces & Flooring
HERMETIC™ Flake Floor is a durable, seamless, PHYSICAL PROPERTIES
chemical resistant floor providing adjustable levels of slight (@ 73°
F / 23°
C, 7 day ambient cure as a coating)
texture and color to match any design theme or surroundings.
PROPERTY TEST RESULT
TYPICAL AREAS OF USE VOC Content N/A 0 g/l
• Public areas Shore D Hardness ASTM D-2240 77 to 81
• Grocery stores Water Absorption (2hr boil) ASTM D-570 0.12 %
• Airports Toxicity N/A None*
• Showrooms Heat Distortion Temperature ASTM D-648 129 F / 54 C
• Retail Compressive Strength ASTM D-695 11,900-13,400 psi
Tensile Strength ASTM D-638 2,100-4,200 psi
• Theme parks
Flexural Strength ASTM D-790 4,500-6,400 psi
• Hospitality
Abrasion Resistance ** ASTM D-4060 9-30 mg loss
• Hospitals
Slant Shear ASTM C-882 100% concrete failure
• Educational
Flammability ASTM D-635 Self-extinguishing
• Automobile showrooms
Flame Spread Rate (NFPA 101) ASTM E-84 Class A
Elongation at Break ASTM D-638 4-6 %
ADVANTAGES Chemical Resistance Contact technical representative for chart
• Ease of maintenance Coef f icient of Friction Adjusted per requirement. Generally 0.50 to 0.80+
• Aesthetic improvements COF Guidelines: ADA Flat Surfaces 0.60
• Hygienic seamless finish ADA Inclined Surfaces 0.80
• Hard and abrasion resistant OSHA 0.50
• VOC free - CA 01350 air quality compliant NFPA 0.80
• Stain and chemical resistant * FDA, USDA, & CIFA Acceptable ** CS-17 Wheel, 1 KG load, 1,000 cycles
• Anti-microbial
• Satin or gloss finish
• Fast set available for quicker turn around time
SPECIFICATION OVERVIEW
• Name: HERMETIC™ Flake Floor
• Surface preparation and detailed application
instructions per manufacturer
• Manufacturer: Elite Crete Systems, Inc. +1-219-465-7671
SAMPLE COLOR CHART
B-715 B-616
B-414 B-411
Elite Crete Systems, Inc.
1061 Transport Drive
B-421 B-504 Valparaiso, Indiana 46383
Phone: +1.219.465.7671 Fax: +1.219.531.0898
Toll Free: 888-323-4445
Email: info@elitecrete.com
B-310 B-427
www.elitecrete.com
The information herein is general information to assist our customers in determining
whether our products are suitable for their specific applications. Our products are intended
for sale to commercial and industrial customers. We require that customers should inspect
B-716 B-517 and test our products before use to satisfy themselves as to the content and suitability for
the applications they intend to use our products for. Nothing herein shall constitute any
NOTE: The colors depicted on this technical document may not illustrate the exact color. warranty expressed or implied, including any warranty of merchantability or fitness for a
Contact a technical support representative for a more accurate color sample. Custom particular purpose, nor is replacement of our materials and in no event shall we be liable for
colors availible upon request. incidental or consequential damages.
HERMETIC™ Quartz
Flooring System
CSI Division 9: Finishes - Flooring
Engineered High Performance Surfaces & Flooring
HERMETIC™ Quartz Floor is a high build, double PHYSICAL PROPERTIES
broadcast system using colored quartz aggregate and sealed (@ 73°
F / 23°
C, 7 day ambient cure as a coating)
with a protective top coat.
PROPERTY TEST RESULT
TYPICAL AREAS OF USE VOC Content N/A 0 g/l
• Commercial kitchens Shore D Hardness ASTM D-2240 80 to 82
• Public restrooms Water Absorption (2hr boil) ASTM D-570 0.04 %
• Locker rooms Toxicity N/A None*
• Showrooms Heat Distortion Temperature ASTM D-648 128 F / 53 C
• Wet or dry processing areas Compressive Strength ASTM D-695 12,500 psi
Tensile Strength ASTM D-638 3,300 psi
• Grocery stores
Flexural Strength ASTM D-790 4,700 psi
• Airports
Abrasion Resistance ** ASTM D-4060 17 mg loss
• Automobile service areas
Slant Shear ASTM C-882 100% concrete failure
• Medical
Flammability ASTM D-635 Self-extinguishing
• Educational
Flame Spread Rate (NFPA 101) ASTM E-84 Class A
Elongation at Break ASTM D-638 4.2 %
ADVANTAGES Chemical Resistance Contact technical representative for chart
• Ease of maintenance Coef f icient of Friction Adjusted per requirement. Generally 0.50 to 0.80+
• Aesthetic improvements & decorative floor finish COF Guidelines: ADA Flat Surfaces 0.60
• Increase slip resistance in wet areas ADA Inclined Surfaces 0.80
• Hard with excellent abrasion resistance OSHA 0.50
• VOC free – CA 01350 air quality compliant NFPA 0.68
• Excellent stain & chemical resistance * FDA, USDA, & CIFA Acceptable ** CS-17 Wheel, 1 KG load, 1,000 cycles
• Anti-microbial, seamless & hygienic
• Fast set available for quicker turn around time
• Wide array of color combinations
SPECIFICATION OVERVIEW
• Name: HERMETIC™ Quartz Floor
• Cured Thickness: @ 115 to 125 mils
• Surface preparation and detailed application
instructions per manufacturer
• Manufacturer: Elite Crete Systems, Inc. +1-219-465-7671
SAMPLE COLOR CHART
QB-1001 QB-1003
QB-1004 QB-1008
Elite Crete Systems, Inc.
1061 Transport Drive
Valparaiso, Indiana 46383
QB-1012 QB-1014
Phone: +1.219.465.7671 Fax: +1.219.531.0898
Toll Free: 888-323-4445
Email: info@elitecrete.com
www.elitecrete.com
QB-1018 QB-1019
The information herein is general information to assist our customers in determining
whether our products are suitable for their specific applications. Our products are intended
for sale to commercial and industrial customers. We require that customers should inspect
and test our products before use to satisfy themselves as to the content and suitability for
QB-1023 QB-1025
the applications they intend to use our products for. Nothing herein shall constitute any
NOTE: The colors depicted on this technical document may not illustrate the exact color. warranty expressed or implied, including any warranty of merchantability or fitness for a
Contact a technical support representative for a more accurate color sample. Custom particular purpose, nor is replacement of our materials and in no event shall we be liable for
colors availible upon request. incidental or consequential damages.HERMETIC™ Stout
Flooring System
CSI Division 9: Finishes - Flooring
Engineered High Performance Surfaces & FlooringHERMETIC™ Stout Floor is a high build, double PHYSICAL PROPERTIES
broadcast system using silica quartz aggregate and sealed with a (@ 73°
F / 23°
C, 7 day ambient cure as a coating)
pigmented top coat.
PROPERTY TEST RESULT
TYPICAL AREAS OF USE VOC Content N/A 0 g/l
• Commercial kitchens Shore D Hardness ASTM D-2240 80 to 82
• Public restrooms Water Absorption (2hr boil) ASTM D-570 0.04 %
• Locker rooms Toxicity N/A None*
• Wet or dry processing areas Heat Distortion Temperature ASTM D-648 128 F / 53 C
• Automobile service areas Compressive Strength ASTM D-695 12,500 psi minimum
Tensile Strength ASTM D-638 2,100 psi minimum
• Medical
Flexural Strength ASTM D-790 4,500 psi minimum
• Educational
Abrasion Resistance ** ASTM D-4060 30 mg loss max
• Warehouses
Slant Shear ASTM C-882 100% concrete failure
• Manufacturing areas
Flammability ASTM D-635 Self-extinguishing
Flame Spread Rate (NFPA 101) ASTM E-84 Class A
ADVANTAGES
Elongation at Break ASTM D-638 2-4 %
• Ease of maintenance Chemical Resistance Contact technical representative for chart
• Increased slip resistance in wet areas Coef f icient of Friction Adjusted per requirement. Generally 0.50 to 0.80+
• Hard with excellent abrasion resistance COF Guidelines: ADA Flat Surfaces 0.60
• VOC free – CA 01350 air quality compliant ADA Inclined Surfaces 0.80
• Excellent stain & chemical resistant OSHA 0.50
• Anti-microbial, seamless & hygienic NFPA 0.68
• Fast set available for quicker turn around time * FDA, USDA, & CIFA Acceptable ** CS-17 Wheel, 1 KG load, 1,000 cycles
• Wide array of colors
SPECIFICATION OVERVIEW
• Name: HERMETIC™ Stout Floor
• Cured Thickness: @ 115 to 125 mils
• Surface preparation and detailed application
instructions per manufacturer
• Manufacturer: Elite Crete Systems, Inc. +1-219-465-7671
SAMPLE COLOR CHART
Light Gray Medium Gray Dark Gray
Tan Brown White
Elite Crete Systems, Inc.
Black Forest Green Country Blue 1061 Transport Drive
Valparaiso, Indiana 46383
Phone: +1.219.465.7671 Fax: +1.219.531.0898
Toll Free: 888-323-4445
Email: info@elitecrete.com
Army Green Tile Red Burnt Orange
www.elitecrete.com
The information herein is general information to assist our customers in determining
whether our products are suitable for their specific applications. Our products are intended
Nevada Clay Safety Yellow Brick Red * for sale to commercial and industrial customers. We require that customers should inspect
and test our products before use to satisfy themselves as to the content and suitability for
the applications they intend to use our products for. Nothing herein shall constitute any
NOTE: The colors depicted on this technical document may not illustrate the exact color. warranty expressed or implied, including any warranty of merchantability or fitness for a
Contact a technical support representative for a more accurate color sample. Custom particular purpose, nor is replacement of our materials and in no event shall we be liable for
colors availible upon request. * Novalac Only incidental or consequential damages.HERMETIC™ Paramount HD
Flooring System
CSI Division 9: Finishes - Flooring
Engineered High Performance Surfaces & FlooringHERMETIC™ Paramount HD Floor is a high PHYSICAL PROPERTIES
build, heavy duty, trowel applied resinous mortar flooring system (@ 73°
F / 23°
C, 7 day ambient cure as a coating)
engineered for industrial applications. Formulated for extreme
abrasion, wear and chemical resistance. PROPERTY TEST RESULT
VOC Content N/A 0 g/l
TYPICAL AREAS OF USE Shore D Hardness ASTM D-2240 83 to 90+
• Warehouses Water Absorption (2hr boil) ASTM D-570 0.10 %
• Manufacturing areas Toxicity N/A None*
Heat Distortion Temperature ASTM D-648 136 F / 54 C
• Automotive service areas
Compressive Strength ASTM D-695 14,500 psi minimum
• High & heavy traf f ic areas
Tensile Strength ASTM D-638 3,300 psi
• Concrete floor restoration
Flexural Strength ASTM D-790 4,400 psi
Abrasion Resistance ** ASTM D-4060 0.2 mg loss
ADVANTAGES
Slant Shear ASTM C-882 100% concrete failure
• Ease of maintenance Flammability ASTM D-635 Self-extinguishing
• Aesthetic improvements Flame Spread Rate (NFPA 101) ASTM E-84 Class A
• Increases the surface strength of the substrate Elongation at Break ASTM D-638 3.2 %
• Hard and abrasion resistant Chemical Resistance Contact technical representative for chart
• VOC free – CA 01350 air quality compliant Coef f icient of Friction Adjusted per requirement. Generally 0.80
• Stain and chemical resistant COF Guidelines: ADA Flat Surfaces 0.60
• Fast set available for quicker turn around time ADA Inclined Surfaces 0.80
OSHA 0.50
SPECIFICATION OVERVIEW NFPA 0.68
• Name: HERMETIC™ Paramount HD Floor * FDA, USDA, & CIFA Acceptable ** CS-17 Wheel, 1 KG load, 1,000 cycles
• Cured Thickness: @ 225 to 250 mils
• Surface preparation and detailed application
instructions per manufacturer
• Manufacturer: Elite Crete Systems, Inc. +1-219-465-7671
SAMPLE COLOR CHART
Light Gray Medium Gray Dark Gray
Tan Brown White
Black Forest Green Country Blue Elite Crete Systems, Inc.
1061 Transport Drive
Valparaiso, Indiana 46383
Phone: +1.219.465.7671 Fax: +1.219.531.0898
Toll Free: 888-323-4445
Army Green Tile Red Burnt Orange Email: info@elitecrete.com
www.elitecrete.com
The information herein is general information to assist our customers in determining
whether our products are suitable for their specific applications. Our products are intended
for sale to commercial and industrial customers. We require that customers should inspect
Nevada Clay Safety Yellow Brick Red *
and test our products before use to satisfy themselves as to the content and suitability for
the applications they intend to use our products for. Nothing herein shall constitute any
NOTE: The colors depicted on this technical document may not illustrate the exact color. warranty expressed or implied, including any warranty of merchantability or fitness for a
Contact a technical support representative for a more accurate color sample. Custom particular purpose, nor is replacement of our materials and in no event shall we be liable for
colors availible upon request. * Novalac Only incidental or consequential damages.HERMETIC™ Paramount
Flooring System
CSI Division 9: Finishes - Flooring
Engineered High Performance Surfaces & FlooringHERMETIC™ Paramount Floor is a high PHYSICAL PROPERTIES
build, self leveling, resinous slurry flooring system engineered (@ 73°
F / 23°
C, 7 day ambient cure as a coating)
for industrial applications. Available in either solid pigment or
colored quartz for a speckled finish. PROPERTY TEST RESULT
VOC Content N/A 0 g/l
TYPICAL AREAS OF USE Shore D Hardness ASTM D-2240 90+
• Warehouses Water Absorption (2hr boil) ASTM D-570 0.09 %
• Manufacturing areas Toxicity N/A None*
• Laboratories & clean rooms Heat Distortion Temperature ASTM D-648 128 F / 51 C
• Automotive service areas & garages Compressive Strength ASTM D-695 14,400 psi minimum
• Hospitals Tensile Strength ASTM D-638 4,100 psi
• Schools Flexural Strength ASTM D-790 4,200 psi
Abrasion Resistance ** ASTM D-4060 0.5 mg loss
• Airports
Slant Shear ASTM C-882 100% concrete failure
• Shopping malls
Flammability ASTM D-635 Self-extinguishing
Flame Spread Rate (NFPA 101) ASTM E-84 Class A
ADVANTAGES
Elongation at Break ASTM D-638 4.1 %
• Ease of maintenance Chemical Resistance Contact technical representative for chart
• Aesthetic improvements Coef f icient of Friction Adjusted per requirement. Generally 0.80+
• Increases the strength of the substrate COF Guidelines: ADA Flat Surfaces 0.60
• Hard and abrasion resistant ADA Inclined Surfaces 0.80
• VOC free – CA 01350 air quality compliant OSHA 0.50
• Stain and chemical resistant NFPA 0.68
• Anti-microbial * FDA, USDA, & CIFA Acceptable ** CS-17 Wheel, 1 KG load, 1,000 cycles
• Fast set available for quicker turn around time
SPECIFICATION OVERVIEW
• Name: HERMETIC™ Paramount Floor
• Cured Thickness: @ 125 to 135 mils
• Surface preparation and detailed application
instructions per manufacturer
• Manufacturer: Elite Crete Systems, Inc. +1-219-465-7671
SAMPLE COLOR CHART
Light Gray Medium Gray Dark Gray
Tan Brown White
Elite Crete Systems, Inc.
Black Forest Green Country Blue 1061 Transport Drive
Valparaiso, Indiana 46383
Phone: +1.219.465.7671 Fax: +1.219.531.0898
Toll Free: 888-323-4445
Email: info@elitecrete.com
Army Green Tile Red Burnt Orange
www.elitecrete.com
The information herein is general information to assist our customers in determining
whether our products are suitable for their specific applications. Our products are intended
Nevada Clay Safety Yellow Brick Red * for sale to commercial and industrial customers. We require that customers should inspect
and test our products before use to satisfy themselves as to the content and suitability for
the applications they intend to use our products for. Nothing herein shall constitute any
NOTE: The colors depicted on this technical document may not illustrate the exact color. warranty expressed or implied, including any warranty of merchantability or fitness for a
Contact a technical support representative for a more accurate color sample. Custom particular purpose, nor is replacement of our materials and in no event shall we be liable for
colors availible upon request. * Novalac Only incidental or consequential damages.HERMETIC™ 4.8S Urethane
Cement Slurry
CSI Division 9: Flooring - Fluid Applied
Engineered High Performance Surfaces & FlooringHERMETIC™ 4.8S Urethane Cement slurry PHYSICAL PROPERTIES
is a three component, thermal shock resistant, urethane slurry (@ 73°
F / 23°
C, 7 day ambient cure as a coating)
(broadcast optional), non-slip flooring system. Available in
a variety of colors and engineered to be FDA and USDA Mix Ratio: Pre-Engineered 3 part unit
acceptable for applications in food manufacturing, packaging Gel Time: 14 minutes
and serving facilities. Consistency: Gage rake slurry
HERMETIC™ 4.8S Urethane Cement slurry is engineered to PROPERTY TEST RESULT
withstand steam cleaning on a daily basis, along with it’s VOC Content N/A 0 g/l
resistance to bacterial growth makes it ideal for application in Shore D Hardness ASTM D-2240 80-85
most food and beverage manufacturing and serving facilities. Compressive Strength ASTM C-579 12,800 psi
Non slip when wet, will withstand severe traffic exposure. Tensile Strength ASTM D-638 4,400 psi
TYPICAL AREAS OF USE Flexural Strength ASTM D-790 6,300 psi
Adhesion ASTM D-4541 >400 (100% concrete failure)
• Meat/Poultry and Dairy Processing
Impact Resistance ASTM D-2794 Pass
• Breweries, and wineries
Abrasion Resistance * ASTM D-4060 2 mg loss
• Pharmaceutical Plants
Thermal Shock Resistance MIL F-52505 Pass (230F) Force Hot Steam
• Commercial Kitchens and Restaurants
Flammability ASTM E-648 Class 1
• Processing Areas
Indoor Air Quality CA-01350 Compliant
• Automotive Service Bays
Coef f icient of Friction ASTM D-2047 0.9 (Passes ADA
• Cold storage facilities reccomendation)
ADVANTAGES * CS-17 Wheel, 1 KG load, 1,000 cycles
• Resistant to extreme hot and cold changes in temperature
• Passes ADA recommendations
• Meets or exceeds FDA AND USDA guidelines
• Does not support bacterial growth
• Resistant to high levels of relative humidity in substrates
• Self leveling, water based, & VOC compliant formulation
• CA 01350 indoor air quality compliant
• Does not contain phthalates
SPECIFICATION OVERVIEW
• Name: HERMETIC™ 4.8S Urethane Cement slurry
• Finish: High gloss or satin
• Cured Thickness; 3/16” to 5/8”
• Surface preparation and detailed application see
manufacturers instructions
• Manufacturer Elite Crete Systems, Inc. +1-219 465-7671
SAMPLE COLOR CHART
Light Gray Medium Gray Dark Gray
Tan Brown White
Elite Crete Systems, Inc.
1061 Transport Drive
Black Forest Green Country Blue
Valparaiso, Indiana 46383
Phone: +1.219.465.7671 Fax: +1.219.531.0898
Toll Free: 888-323-4445
Army Green Tile Red Burnt Orange
Email: info@elitecrete.com
Nevada Clay Safety Yellow Brick Red
www.elitecrete.com
For integral color and decorative quartz options, contact a The information herein is general information to assist our customers in determining
whether our products are suitable for their specific applications. Our products are intended
technical representative. for sale to commercial and industrial customers. We require that customers should inspect
and test our products before use to satisfy themselves as to the content and suitability for
NOTE: The colors depicted on this technical document may not illustrate the exact color.
Contact a technical support representative for a more accurate color sample. Custom the applications they intend to use our products for. Nothing herein shall constitute any
colors availible upon request. warranty expressed or implied, including any warranty of merchantability or fitness for a
particular purpose, nor is replacement of our materials and in no event shall we be liable for
incidental or consequential damages.HERMETIC™ Aircraft
Flooring System
CSI Division 9: Finishes - Flooring
Engineered High Performance Surfaces & FlooringHERMETIC™ Aircraft Floor is a high performance, PHYSICAL PROPERTIES
self leveling, resinous coating engineered for aircraft hangars (@ 73°
F / 23°
C, 7 day ambient cure as a coating)
and specialty aerospace floors. This floor exhibits exceptional
resistance to chemicals common in such environments including PROPERTY TEST RESULT
Skydrol fluids. VOC Content N/A 0 g/l
Shore D Hardness ASTM D-2240 80
ADVANTAGES Water Absorption (2hr boil) ASTM D-570 0.03 %
• Ease of maintenance Toxicity N/A None*
• Protects the substrate Heat Distortion Temperature ASTM D-648 130 F / 55 C
• Aesthetic improvements Compressive Strength ASTM D-695 11,900 psi minimum
• Increases the strength of the substrate Tensile Strength ASTM D-638 2,100 psi minimum
• Hard and abrasion resistant Flexural Strength ASTM D-790 4,200 psi minimum
• Light reflective finish Abrasion Resistance ** ASTM D-4060 9-30 mg loss
• VOC free – CA 01350 air quality compliant Slant Shear ASTM C-882 100% concrete failure
Flammability ASTM D-635 Self-extinguishing
• Stain and chemical resistant
Flame Spread Rate (NFPA 101) ASTM E-84 Class A
• Variable degree of slip resistance depending on requirements
Elongation at Break ASTM D-638 4.2-6.5 %
• Anti-microbial
Chemical Resistance Contact technical representative for chart
• Satin or gloss finish
Coef f icient of Friction Adjusted per requirement. Generally 0.50 to 0.80
• Fast set available for quicker turn around time
COF Guidelines: ADA Flat Surfaces 0.60
ADA Inclined Surfaces 0.80
SPECIFICATION OVERVIEW OSHA 0.50
• Name: HERMETIC™ Aircraft Floor NFPA 0.68
• Finish: Gloss or satin * FDA, USDA, & CIFA Acceptable ** CS-17 Wheel, 1 KG load, 1,000 cycles
• Cured Thickness: @ 45 to 90 mils
• Surface preparation and detailed application
instructions per manufacturer
• Manufacturer: Elite Crete Systems, Inc. +1-219-465-7671
SAMPLE COLOR CHART
Light Gray Medium Gray Dark Gray
Tan Brown White
Black Forest Green Country Blue
Elite Crete Systems, Inc.
1061 Transport Drive
Valparaiso, Indiana 46383
Phone: +1.219.465.7671 Fax: +1.219.531.0898
Toll Free: 888-323-4445
Army Green Tile Red Burnt Orange Email: info@elitecrete.com
www.elitecrete.com
The information herein is general information to assist our customers in determining
whether our products are suitable for their specific applications. Our products are intended
for sale to commercial and industrial customers. We require that customers should inspect
Nevada Clay Safety Yellow Brick Red *
and test our products before use to satisfy themselves as to the content and suitability for
the applications they intend to use our products for. Nothing herein shall constitute any
NOTE: The colors depicted on this technical document may not illustrate the exact color. warranty expressed or implied, including any warranty of merchantability or fitness for a
Contact a technical support representative for a more accurate color sample. Custom particular purpose, nor is replacement of our materials and in no event shall we be liable for
colors availible upon request. * Novalac Only incidental or consequential damages.HERMETIC™ Fire Apparatus Floors
CSI Division 9: Finishes - Flooring
Engineered High Performance Surfaces & FlooringHERMETIC™ Fire Apparatus Floors are
resinous, fluid applied floors engineered to improve the look of
fire apparatus bay floors while providing outstanding durability.
ADVANTAGES
• Ease of maintenance
• Protects the concrete substrate
• Aesthetic improvements
• Abrasion resistant
• VOC free - CA 01350 air quality compliant
• Stain and chemical resistant
• Anti-microbial
• Satin or gloss finish
• Fast set available for quicker turn around time
• Wide selection of colors, patterns, and other options
• Custom logos available
SAMPLE FLAKE COLOR CHART
B-715 B-616
B-414 B-411
B-421 B-504
B-310 B-427
B-716 B-517
SAMPLE COLOR CHART
Light Gray Medium Gray Dark Gray
Elite Crete Systems, Inc.
Tan Brown White
1151 Transport Drive
Valparaiso, Indiana 46383
Phone: +1.219.465.7671 Fax: +1.219.531.0898
Black Forest Green Country Blue Toll Free: 888-323-4445
Email: info@elitecrete.com
Army Green Tile Red Burnt Orange www.elitecrete.com
The information herein is general information to assist our customers in determining
whether our products are suitable for their specific applications. Our products are intended
for sale to commercial and industrial customers. We require that customers should inspect
Nevada Clay Brick Red * and test our products before use to satisfy themselves as to the content and suitability for
Safety Yellow
the applications they intend to use our products for. Nothing herein shall constitute any
NOTE: The colors depicted on this technical document may not illustrate the exact color. warranty expressed or implied, including any warranty of merchantability or fitness for a
Contact a technical support representative for a more accurate color sample. Custom particular purpose, nor is replacement of our materials and in no event shall we be liable for
colors availible upon request. * Novalac Only incidental or consequential damages.Garage Floor Coatings
CSI Division 9: Finishes - Flooring
Engineered High Performance Surfaces & FlooringGarage Floor Coatings are resinous or cementitious
finishes engineered to improve the look of a garage while providing
outstanding durability.
ADVANTAGES
• Ease of maintenance
• Protects the concrete substrate
• Aesthetic improvements
• Hard and abrasion resistant
• VOC free - CA 01350 air quality compliant
• Stain and chemical resistant
• Anti-microbial
• Satin or gloss finish
• Fast set available for quicker turn around time
• Wide selection of colors, patterns, and other options
• Custom logos available
SAMPLE FLAKE COLOR CHART
B-715 B-616
B-414 B-411
B-421 B-504
B-310 B-427
B-716 B-517
SAMPLE EPOXY COLOR CHART
Light Gray Medium Gray Dark Gray
Elite Crete Systems, Inc.
Tan Brown White
1061 Transport Drive
Valparaiso, Indiana 46383
Phone: +1.219.465.7671 Fax: +1.219.531.0898
Black Forest Green Country Blue Toll Free: 888-323-4445
Email: info@elitecrete.com
Army Green Tile Red Burnt Orange www.elitecrete.com
The information herein is general information to assist our customers in determining
whether our products are suitable for their specific applications. Our products are intended
for sale to commercial and industrial customers. We require that customers should inspect
Nevada Clay Brick Red * and test our products before use to satisfy themselves as to the content and suitability for
Safety Yellow
the applications they intend to use our products for. Nothing herein shall constitute any
NOTE: The colors depicted on this technical document may not illustrate the exact color. warranty expressed or implied, including any warranty of merchantability or fitness for a
Contact a technical support representative for a more accurate color sample. Custom particular purpose, nor is replacement of our materials and in no event shall we be liable for
colors availible upon request. * Novalac Only incidental or consequential damages.Exterior Decorative
Concrete Finishes
CSI Division 3: Concrete - Decorative & Repair
Engineered High Performance Surfaces & FlooringTECHNICAL DATA
PROPERTY RESULT
Compressive Strength
1 day 1350 to 1425 psi
7 days 3655 to 3750 psi
28 days 4560 to 4800 psi
Flexural Strength
7 days 875 to 990 psi
28 days 1415 to 1450 psi
Tensile Strength
7 days 350 to 375 psi
28 days 700 to 750 psi
Abrasion Loss
Unsealed 0.17 to 0.19%
Density
7 days 1.17 to 1.19 g/cm3
28 days 1.89 to 1.95 g/cm3
Exterior Decorative Concrete Overlays are engineered Shear Bond
to be a surface repair or an aesthetic finish that can be applied 7 days 320 to 335 psi
to new or existing concrete surfaces. The finished application 28 days 575 to 595 psi
is actually stronger than concrete and can withstand vehicular Cohesive Strength
traffic and harsh temperatures (extreme hot or cold). 7 days 52 to 58 psi
28 days 98 to 103 psi
BENEFITS Impact Resistance
7 days 16 to 19 inch/lbs.
• Virtually unlimited designs, patterns, textures and 28 days 28 to 29 inch/lbs.
color options.
Variance in results due to different applications and thickness.
• Can create the authentic look and feel of any stone,
brick, tile, wood and even just plain new concrete.
• Available in any color combination to match
surrounding design.
• Cost ef fective compared to: full depth stamped
concrete, pavers, brick, real stone or integrally
colored concrete.
• Extreme durability for high traf f ic areas.
• Very low maintenance.
• Highly resistant to deicing salts, freeze/thaw
climates, extreme heat, wet conditions and UV rays.
• Quick installation time.
• Can be installed pre or post construction.
• For new or existing concrete surfaces.
Elite Crete Systems, Inc.
1061 Transport Drive
Valparaiso, Indiana 46383
Phone: +1.219.465.7671 Fax: +1.219.531.0898
Toll Free: 888-323-4445
Email: info@elitecrete.com
www.elitecrete.com
The information herein is general information to assist our customers in determining
whether our products are suitable for their specific applications. Our products are intended
for sale to commercial and industrial customers. We require that customers should inspect
and test our products before use to satisfy themselves as to the content and suitability for
the applications they intend to use our products for. Nothing herein shall constitute any
warranty expressed or implied, including any warranty of merchantability or fitness for a
particular purpose, nor is replacement of our materials and in no event shall we be liable for
incidental or consequential damages.Pool Deck Coatings
CSI Division 3: Concrete - Decorative & Repair
Engineered High Performance Surfaces & FlooringTECHNICAL DATA
PROPERTY RESULT
Compressive Strength
1 day 1350 to 1425 psi
7 days 3655 to 3750 psi
28 days 4565 to 4800 psi
Flexural Strength
7 days 875 to 990 psi
28 days 1415 to 1450 psi
Tensile Strength
7 days 350 to 375 psi
28 days 700 to 750 psi
Abrasion Loss
Unsealed 0.17 to 0.19%
Density
7 days 1.17 to 1.19 g/cm3
28 days 1.89 to 1.95 g/cm3
Pool Deck Coatings are polymer modified to act as Shear Bond
surface repair or an aesthetic finish that can be applied to new 7 days 320 to 335 psi
or existing concrete surfaces. The coating is actually stronger 28 days 575 to 595 psi
than concrete and can withstand vehicular traf f ic and harsh Cohesive Strength
temperatures (extreme hot or cold). 7 days 52 to 58 psi
28 days 98 to 103 psi
BENEFITS Impact Resistance
7 days 16 to 19 inch/lbs.
• Virtually unlimited designs, patterns, textures and 28 days 28 to 29 inch/lbs.
color options.
Variance in results due to different applications and thickness.
• Non-slip even when wet.
• Can create the authentic look and feel of any stone,
brick, tile, wood and even just plain new concrete.
• Available in any color combination to match
surrounding design.
• Cost ef fective compared to: full depth stamped
concrete, pavers, brick, real stone or integrally
colored concrete.
• Extreme durability for high traf fic areas.
• Very low maintenance.
• Highly resistant to deicing salts, freeze/thaw
climates, extreme heat, wet conditions and UV rays.
• Quick installation time.
• Can be installed pre or post construction.
• For new or existing concrete surfaces.
Elite Crete Systems, Inc.
1061 Transport Drive
Valparaiso, Indiana 46383
Phone: +1.219.465.7671 Fax: +1.219.531.0898
Toll Free: 888-323-4445
Email: info@elitecrete.com
www.elitecrete.com
The information herein is general information to assist our customers in determining
whether our products are suitable for their specific applications. Our products are intended
for sale to commercial and industrial customers. We require that customers should inspect
and test our products before use to satisfy themselves as to the content and suitability for
the applications they intend to use our products for. Nothing herein shall constitute any
warranty expressed or implied, including any warranty of merchantability or fitness for a
particular purpose, nor is replacement of our materials and in no event shall we be liable for
incidental or consequential damages.You can also read
