APPENDIX TO INSTRUCTIONS MANUAL - LEON - SEAT UK
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
APPENDIX TO
INSTRUCTIONS MANUAL
LEONInstruments and control lamps
Instruments and control lamps
Digital instrument panel (SEAT Digital Cockpit)
Fig. 1 SEAT Digital Cockpit on the instrument
panel (classic view).
Details of the instruments : by pressing the button on the multifunc- area of the circular clocks of the SEAT Digital
1 Rev counter (revolutions per minute with tion steering wheel. By selecting different in- Cockpit.
engine running)1) formation profiles, displays additional to
those of the classic circular instruments, Classic View
2 Engaged gear or currently selected posi- such as navigation details, multimedia or
tion of the selector lever The revolutions per minute and speedometer
driving data, may be shown. »
needles are full-length ››› Fig. 1.
3 Screen display ››› page 3
4 Speedometer Information profiles
5 Digital speed display The INSTRUMENT PANEL option (Infotain-
ment button / > function button Ve-
The SEAT Digital Cockpit is a digital instru-
hicle > View > Instrument panel)
ment panel with a high-resolution colour TFT
allows to choose different options for dis-
screen. It has 3 view which can be accessed
playing the information shown in the central
1) Depending on the version, x100 or x1000.
1View 1, 2, 3 or AUTOMATIC*
View 1, 2, 3 or AUTOMATIC*1) ● Assist systems. Graphic representation of To do this, select the Navigation menu op-
different assist systems. tion on the instrument panel ››› page 4.
Customising the information displayed in the
central area of the circular clocks. Only 2 of ● Traffic signs. Display of detected traffic Depending on the equipment, the navigation
these items of information can be displayed signs. map may be displayed in the SEAT Digital
at the same time, but the user chooses which ● Navigation. Graphic representation of navi- Cockpit or in the Infotainment System or in
to display, and in what order, by moving the gation using arrows. both at the same time. If only displayed in
finger vertically over the dials. the Infotainment System, the SEAT Digital
Depending on the equipment, the number Cockpit will only display the manoeuvre ar-
● Consumption. Graphic representation of and content of the selectable information rows.
current consumption and digital display of profiles may vary.
average consumption. Navigation map transfer
● Acceleration. Graphic representation of lon-
Using the map transfer button ››› Fig. 2, the
gitudinal and transverse acceleration. Navigation map in the SEAT Digital map is transferred from the Infotainment Sys-
● Audio: Digital display of current audio play- Cockpit* tem to the SEAT Digital Cockpit and vice ver-
back. sa.
● Height. Digital display of current height Using the right thumbwheel of the multifunc-
above sea level. tion steering wheel, while in the Naviga-
● Compass. Digital compass display. tion menu, the map can be transferred
● Information on arrival at destination. Digi- again to the Infotainment System.
tal display of remaining travelling time, dis-
tance to destination and estimated time of
arrival.
● Operating range. Digital display of remain-
ing operating range.
● Travelling time. Fig. 2 Infotainment System: map transfer but-
ton
● Route guidance.
● Journey. Digital display of the route. Depending on the equipment, the SEAT
Digital Cockpit may display a detailed map.
1) Preset information depending on the selected
“Driving Mode”.
2Instruments and control lamps
Status display ● Low-consumption driving played may be higher than the actual temper-
● Distinctive letters for engine (DLE) ature due to the heat discharged by the en-
Possible displays on the instrument panel gine.
● Driver assistance systems display
display
The measuring range extends from -45°C
A variety of information can be viewed on the Doors, bonnet and boot open (-49°F) to +76°C (+169°F).
instrument panel display, depending on the
vehicle equipment: After unlocking the vehicle and while driving,
Gear-change recommendation
the display on the instrument panel shows
● Doors, bonnet and boot open While driving, the instrument panel may indi-
whether any of the doors, bonnet and the
● Warning and information messages boot are open and, if necessary, it may also cate a gear-change recommendation for sav-
● Odometer be indicated by an acoustic signal. The dis- ing fuel.
play may vary according to the type of instru-
● Time
ment panel fitted. Odometer
● Radio and navigation system instructions
The odometer registers the total distance
››› Booklet Infotainment System Selector lever positions (DSG® dual clutch travelled by the car.
● Telephone display ››› Booklet Infotainment gearbox)
System The odometer (trip) displays the distance
The current position of the selector lever is travelled since the last odometer reset.
● Outside temperature displayed both next to the lever and on the
● Compass display instrument panel display. When the lever is ● Set the Trip recorder to zero using the Info-
in the D/S position, as well as in the Tiptronic tainment System or the multifunction steer-
● Selector lever positions
position, the gear engaged at any time is dis- ing wheel ››› page 5.
● Gear-change recommendation played on the instrument panel display.
● Driving data display (multifunction display) Speed warning for winter tyres
and menus to perform various adjustments Outside temperature display
If the maximum speed setting is exceeded,
››› page 4 If the outside temperature is lower than ap- this will be displayed on the instrument pan-
● Service interval display prox. +4°C (+39°F), the external temperature el display ››› page 4.
● Speed warning ››› page 4 display additionally lights up the “snowflake
The settings for the speed warning can be
symbol” . This symbol remains lit until the
● Speed warning for winter tyres adjusted in the Infotainment System, in the
outside temperature rises above +6°C
● Start-Stop system status display (+43°F) ››› .
vehicle settings menu. »
● Signs detected by the traffic signal detec- When the vehicle is stationary, when the aux-
tion system iliary heater is switched on or when driving at
● Active cylinder management display (ACT®) very low speed, the outside temperature dis-
3Compass display
Compass display WARNING formed and information cannot be displayed
Depending on the equipment, when the igni- as described. In this case, go to a specialised
Even when outside temperatures are above
tion is switched on, the direction in which workshop and request the repair of the
freezing, some roads and bridges may be icy.
you drive is displayed on the instrument pan- faults.
● The “snowflake symbol” indicates that
el display with a symbol, e.g. NW for North- there may be danger of frost.
west.
● At outside temperatures above +4°C (+39°
When the Infotainment System is turned on F), there could also be ice even when the
Instrument panel menus
and there is no active guide to the destina- “snowflake symbol” is not lit up.
The number of menus and informative dis-
tion, the graphic representation of a compass ● Do not rely only on the outside temperature
plays available will depend on the vehicle’s
is also displayed. display! electronic system and equipment.
Low-consumption driving A specialised workshop will be able to pro-
Note
gramme other functions or change the exist-
When driving, it is displayed on the instru- ● Different instrument panels are available ing ones, depending on the vehicle equip-
ment panel if the vehicle is in low-con- and therefore the versions and instructions ment. SEAT recommends visiting a SEAT deal-
sumption status. on the display may vary. In the case of dis- ership for this.
plays without information or warning texts,
Distinctive letters for engine (DLE) faults are indicated exclusively by the control Some menu options can only be opened
● Select the Operating range information lamps. when the vehicle is at a standstill.
profile on the instrument panel (Infotainment ● Some indications on the instrument panel ■ Driving data ››› page 5
button / > function button Vehicle display may be concealed by a sudden event, ■ Assist systems.
> View > Driving data > Operating e.g. an incoming call.
■ Lane Assist On/Off
range). ● Depending on the equipment, some set-
■ Front Assist On/Off
● Press and hold the multifunction steer- tings and instructions can also be adjus-
ted/made or displayed in the Infotainment ■ Blind Spot Monitor On/Off
ing wheel button until the Service menu is
System. ■ ACC (only display)
displayed on the instrument panel display
››› page 5. ● If there are several warnings, the corre- ■ Navigation ››› Booklet Infotainment System
sponding symbols will light up successively
● Select the Distinctive letters for ■ Audio ››› Booklet Infotainment System
for a few seconds. The symbols will remain lit
engine menu option. until the cause is eliminated.
■ Telephone ››› Booklet Infotainment System
● If, when the ignition is switched on, warn-
■ Vehicle status ››› page 6
ings about existing faults are displayed, it is ■ Lap timer*
possible that adjustments cannot be per-
4Instruments and control lamps
Service Menu Distinctive letters for engine (DLE) Since refuelling memory
Select the Distinctive letters for Display and memory of the driving data and
Various adjustments can be performed in the engine menu. The distinctive letters for en- consumption values collected. When refuel-
Service menu depending on the equipment. gine will be displayed on the instrument pan- ling, the memory is erased.
el display.
Open the Service menu Total calculation memory
To open the Service menu, select the Oper- Set time This memory collects driving data up to a
ating range information profile (Infotain- Select the Time menu and set the correct maximum of 19 hours and 59 minutes or 99
ment button / > function button Ve- time by turning the right thumbwheel of the hours and 59 minutes, or up to a maximum
hicle > View > Driving data > Op‐ multifunction steering wheel. of 1,999.9 km or 9,999.9 km. When one of
erating range) and hold down the but- these maximum values is exceeded (it varies
ton of the multifunction steering wheel for depending on the version of the instrument
approx. 4 seconds. Now you can navigate the panel), the memory is erased.
menu with the multifunction steering wheel Driving data display (multifunction
buttons in the usual way. display)
Erase diriving data memories
Restart the service interval display The driving data display (multifunction dis- ● Select the memory that you wish to erase.
play) shows different driving data and con- ● Press the button of the multifunction
Select the Service menu and follow the in- sumption values.
structions given on the instrument panel dis- steering wheel for approx. 2 seconds.
play. Switch displays
Select the displays
● Turn the right thumbwheel of the multifunc-
Restart the oil service The driving data to be displayed may be ad-
tion steering wheel ››› page 8.
Select the Restore Oil Service menu justed in the Infotainment System, in the ve-
and follow the instructions given on the in- hicle's settings menu.
Change the memory
strument panel display.
Press the button on the multifunction Average consumption display
Restart driving data steering wheel.
The average fuel consumption is displayed
Select the Reset Trip recorder menu after approx. 300 meters. »
Since start memory
and follow the instructions given on the in-
strument panel display. The memory will be deleted if the journey is
interrupted for more than 2 hours.
5Operating range display
Operating range display ● Press the button of the multifunction Priority 1 warning (in red) The symbol flash-
Approximate distance in km that can still be steering wheel to save the current speed and es or lights up (partly accompanied by
travelled if the same driving style is main- activate the warning. acoustic warning signals). Do not car-
tained. ● Set the desired speed after approx. 5 sec- ry on driving! Danger! Check the fault
onds by turning the right thumbwheel of the and eliminate the cause. In this case,
Display AdBlue Operating range or Op- multifunction steering wheel. Next, press the you should seek professional assis-
erating range 1) button or wait several seconds. The speed tance.
is stored and the warning activated. Priority 2 warning (in yellow). The symbol
Approximate distance in km that can still be
● To disable the warning, press the button flashes or lights up (partly accompanied
travelled with the current AdBlue® tank level
again. The saved speed is deleted. by acoustic warning signals). Malfunc-
if the same driving style is maintained. The
tions or lack of operating liquids can
display is shown from an operating range of
The warning may be adjusted for speeds be- cause damage to the vehicle and its fail-
less than 2,400 km and cannot be deactiva-
tween 30 km/h (18 mph) and 250 km/h ure. Check the function that fails as
ted.
(155 mph). soon as possible. In this case, you
should seek professional assistance.
Average speed display
Informative message. Provides information
The average speed is displayed after approx. Warning and information messages about processes in the vehicle.
100 metres.
The system runs a check on certain compo- Note
Convenience consumers nents and functions when the ignition is
● Depending on the equipment, some set-
A list of the connected convenience systems switched on and while the vehicle is moving.
tings and instructions can also be adjus-
that increase energy consumption is dis- Faults are displayed on the instrument panel ted/made or displayed in the Infotainment
played, e.g. the air conditioning. display in the form of red and yellow warning System.
symbols accompanied by messages and, de-
● If there are several warnings, the corre-
Set a speed warning pending on the case, even an acoustic sig-
sponding symbols will light up successively
nal. The display of messages and symbols for a few seconds. The symbols will remain lit
● Select the display Speed warning at
may vary depending on the version of the in- until the cause is eliminated.
--- km/h or Speed warning at strument panel.
--- mph. ● If, when the ignition is switched on, warn-
Existing faults can also be checked manually. ings about existing faults are displayed, it is
This requires opening the menu Vehicle
status or Vehicle ››› page 4.
1) Not available in all countries.
6Instruments and control lamps
possible that adjustments cannot be per- WARNING Engine coolant temperature display
formed and information cannot be displayed
If a vehicle is driven with too low a fuel level,
as described. In this case, go to a specialised
it could stop in traffic and accidents and seri-
workshop and request the repair of the
ous injuries could occur.
faults.
● If the level of the fuel tank is too low, the
fuel could reach the engine irregularly, espe-
cially when going up or down slopes.
Fuel gauge ● The steering and the driver and braking as-
sist systems do not work if the engine runs ir-
regularly or if it switches itself off due to lack
of fuel or its irregular topping up.
● Refuel as long as there is only a quarter of
fuel left in the tank to prevent the vehicle Fig. 4 Engine coolant temperature display in
from stopping due to lack of fuel. the SEAT Digital Cockpit.
A Cold area. The engine has not yet
CAUTION reached the operating temperature. Avoid
Never run the fuel tank completely dry. If the high engine speeds and subjecting the
fuel is not topped up regularly, it may cause engine to high stress as long as it has not
Fig. 3 Fuel gauge in the SEAT Digital Cockpit.
faulty combustion and unburnt fuel could reached the operating temperature.
reach the exhaust system. The catalytic con- B Normal area
verter or the particle filter could be damaged!
Fuel tank almost empty C Warning area. If the engine is subjected
to high stress, especially at high exterior
The control lamp turns yellow Note temperatures, the light emitting diodes
The fuel in the reserve is being used (red mark) ››› . The small arrow on the fuel gauge next to the can light up in the warning area.
Refuel as soon as possible. fuel dispenser symbol points to the side of
the vehicle where the fuel tank flap is loca- Engine coolant
Presence of water in the fuel ted.
The control lamp lights up and the
The control lamp turns yellow
central warning light flashes red.
Switch the engine off and seek professional assistance. The engine coolant level is not correct or there is a fault
in the coolant system. Do not carry on driving! »
7Operating the instrument panel
● Stop the vehicle, switch off the engine and Operation with the multifunction ton or wait a few seconds until the menu or
let it cool. steering wheel informative display opens automatically.
● Check the engine coolant level.
Adjust menu settings
● If the warning lamp does not go out even if
the coolant level is correct, seek professional ● In the displayed menu, turn the right
assistance. thumbwheel of the multifunction steering
wheel ››› Fig. 5 until the desired menu option
is selected. The option is highlighted.
● Press the ››› Fig. 5 button for the desired
Operating the instrument panel modifications. When the function or system
in question are highlighted, it means they
Topic introduction are enabled.
Some menu options can only be opened Fig. 5 Right side of the multifunction steering Return to menu selection
when the vehicle is at a standstill. wheel: buttons to use the menus and infor-
mative displays of the instrument panel. Press the button or ››› Fig. 5.
WARNING
As long as there is a priority 1 warning Note
Distracting the driver in any way can lead to
an accident and cause injuries. ››› page 6, no menu can be accessed. Some If, when the ignition is switched on, warnings
warnings can be confirmed and hidden with about existing faults are displayed, it is pos-
● Never use the menus on the instrument
the button of the multifunction steering sible that adjustments cannot be performed
panel display while driving.
wheel ››› Fig. 5. and information cannot be displayed as de-
scribed. In this case, go to a specialised
Note Select a menu or an informative display workshop and request the repair of the
faults.
After charging or changing the 12-volt bat- ● Switch the ignition on.
tery, check the system settings. In case of in-
terruption of the power supply, the system ● If a message or vehicle symbol is dis-
settings may have changed or been deleted. played, press the ››› Fig. 5 button; several
times if required.
● To switch menus use the or
››› Fig. 5 buttons.
● To open the menu or the informative dis-
play that appears, press the ››› Fig. 5 but-
8Multifunction steering wheel*
Multifunction steering wheel*
Operating audio, telephone and navigation with voice control
3 Valid for vehicles with SEAT Digital Cockpit (digital panel).
Fig. 6 Controls on the steering wheel.
The steering wheel includes multifunction the audio, telephone and radio/navigation
modules from where it is possible to control functions without needing to distract the
driver.
Button Radio Media (except AUX) AUX Telephonea) Navigationa)
Turn announcement volume
up/down. You do not need to
Turn volume up/down. You do Turn volume up/down. You do Turn volume up/down. You do Turn volume up/down. You do
A be in navigation mode but
not need to be in audio mode not need to be in audio mode not need to be in audio mode not need to be in telephone
Turn there has to be an announce-
(radio). (media). (media). mode.
ment active when you adjust
the volume.
A Mute the current navigation an-
Mute volume. Mute volume. Mute volume. Mute an incoming call.
Press nouncement.
Enable/disable voice controlb).
B a)
This function can be performed from any mode, except if there is an active call. »
9Operating audio, telephone and navigation with voice control
Button Radio Media (except AUX) AUX Telephonea) Navigationa)
Short press: Switch to the pre-
– No active call: Radio/Media No function for the other
vious/next song.
Search for the previous/next functionality (except AUX) modes (navigation, assistants,
C / D No function
stationc). vehicle status, lap timer*, driv-
Hold down: Fast rewind/for-
– Active call: no function ing data).
wardd).
E / F a) Change menu on instrument panel.b)
Short press: change view Classic Info - Digital Maps - Advanced Info b).
G
Hold down: access the setting view of the “Customised Profiles”b).
– Navi System Plus: Zoom
in/out (with and without active
– There is no active call: List of route).
last calls.
– Navi System: If there is a map
H List of available functions (au- List of available functions (au-
No function – Active calls: access the call in the Digital Panel: Zoom
Turn dio/media). dio/media).
options list (call on hold, hang in/out (with and without active
up, mute microphone, private route). If there is no map in the
number, etc.). Digital Panel: transfer the map
to the Digital Panel (with and
without active route).
H Auto Zoom/Manual Zoom if the
No function No function No function No function
Press map is in the Digital Panel.
a) Depending on the vehicle's equipment package.
b) This function can be used from any mode (audio, media, navigation, assistants, vehicle status, lap timer*, driving data).
c) This action can be performed when you are listening to the radio; there is no need to be in audio-radio mode.
d) These actions can be performed when you are listening to media; there is no need to be in audio-media mode.
10SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to under- stand, that at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no right at all may derive based on the data, drawings and descriptions in this current handbook. All texts, illustrations and standards in this handbook are based on the status of information at the time of printing. Except for error or omission, the information included in the current handbook is valid as of the date of closing print. Re-printing, copying or translating, whether total or partial is not allowed unless SEAT allows it in written form. SEAT reserves all rights in accordance with the “Copyright” Act. All rights on changes are reserved. ❀ This paper has been manufactured using bleached non-chlorine cellulose. © SEAT S.A.
Inglés 5F0012720FS (01.18)
5F0012720FSYou can also read
