User guide - BLENDER - imgix
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
® BLENDER User guide.
Important safeguards. Warning! To avoid the risk of serious injury, carefully read all instructions before operating your NutriBullet®. When using any electrical appliance, basic safety precautions should always be observed, including the following important information. ! Save these instructions! FOR HOUSEHOLD USE ONLY GENERAL SAFET Y Use extra caution when INFORMATION blending hot liquids in • Close supervision is necessary the pitcher. when any appliance is used Never turn the power on by or near children. Keep cord out of reach of children. This while using the pitcher appliance is not a toy, do not without the vented lid allow children to play with it. cap inserted and locked • Do not use outdoors. into the pitcher lid, as ingredients can splash • NEVER LEAVE THE NUTRIBULLET® UNATTENDED and if hot or warm, could WHILE IT IS IN USE. potentially cause thermal • ALWAYS TURN THE injury or property damage. NUTRIBULLET® OFF WHEN Steam and splattering WARNING! NOT IN USE. ingredients can escape through the pitcher lid, HEAT & PRESSURE SAFETY potentially scalding and/or • Always use extreme care burning the user. NEVER blend and attention when using hot liquids in your pitcher hot ingredients in any without the pitcher lid and blending product, as the vented lid cap attached and friction from the rotating locked. The vented lid cap blades (during the blending allows steam and pressure process) combined with the to escape, while guarding thermal energy of the heated against excess splashing. ingredients can create a dangerous situation if not When blending hot liquids, properly controlled. add liquid and solid ingredients to your pitcher below their respective MAX 3
WARNING! lines. Attach the pitcher Never use the NutriBullet® to come in contact with the not recommended and may lid with the vented lid cap Blender without adding blade. Spatulas, spoons cause fire, electric shock, inserted and locked. Press and other tools can make personal injury, or product POWER and begin blending liquid, as doing so may contact with the blade, which damage and will void the on the LOW setting. Once damage the blades. may result in damage to product’s warranty. ingredients are integrated • The cyclonic action® of your the machine, damage to • To avoid the risk of electric adjust speed as needed. NutriBullet® Blender requires property, and possible injury. shock, never immerse the the use of liquids to make • NEVER USE YOUR FINGERS cord, plug, or motor base of If the NutriBullet® blends smoothies and other nutritious OR ANY PART OF YOUR HAND the NutriBullet® in water or for longer than one minute, items. The NutriBullet® TO PUSH INGREDIENTS other liquids. Discontinue friction from the blades can Blender is not intended to be DOWN TOWARD THE BLADE. use if the cord, plug, or cause ingredients to heat and used without liquids, or as Only use the provided tamper. motor base is damaged. generate internal pressure an ice crusher. ALWAYS ADD inside the vessel. If a blending LIQUID to your recipe. Remember to use extra • Always POWER OFF and vessel becomes warm to the UNPLUG the NutriBullet® touch, turn off the machine • DO NOT USE the NutriBullet® caution when blending Blender when it is not in and allow the vessel to cool Blender for grinding dry hot liquids or ingredients use or BEFORE assembling, completely before carefully ingredients such as grains, in the pitcher. disassembling, changing opening, pointed away from cereal, or coffee, as this may accessories, or cleaning. Do damage the motor and blade. • Spray or escaping steam your body to avoid injury. not attempt to handle the may cause burns and/or NutriBullet® Blender until all BL ADE SAFET Y PITCHER SAFET Y property damage. parts have stopped moving. • Always operate the pitcher with Do not fill container above WARNING! Blades are sharp! Handle • Do not allow the cord to hang WARNING! carefully. Use care when the pitcher lid securely in place. the maximum capacity lines over the edge of the table or handling any blade. To indicated for liquids and • With recipes that require counter. Do not pull, twist, or avoid laceration injury, do solid ingredients. certain ingredients to be damage the power cord. Do not handle or touch any incorporated during blending, Always begin blending hot not allow the cord to touch hot blade edge. first add the base ingredients, ingredients on the LOW setting. surfaces, including the stove. AVOID CONTACT WITH seal the pitcher lid with vented Keep hands and other exposed • If the motor stops working, MOVING PARTS! Keep hands lid cap attached, and begin skin away from lid opening to unplug the motor base and let and utensils out of and away blending. Then, once the prevent possible burns. it cool for at least 15 minutes from blades while blending ingredients are well mixed, before attempting to use food to reduce the risk of twist open the vented lid cap ELECTRICAL SAFET Y it again. Your NutriBullet® severe personal injury. and carefully pour or drop Blender has an internal ingredients into the mixture. WARNING! Do not use this product • After blending, turn the in locations with different thermal breaker that shuts off unit off. Wait to remove the • If you need to push electrical specifications or the motor when it overheats. pitcher from the motor base ingredients closer to the plug types. Do not operate The thermal breaker will reset until the blades come to a blade, ONLY USE THE with any type of plug when the unit is unplugged, full stop and the unit powers TAMPER PROVIDED with adapter or voltage converter and the thermal breaker cools down completely. Taking the the NutriBullet® Blender device, as these may cause down sufficiently. vessel off the unit prior to configuration. DO NOT use electrical shorting, fire, POLARIZED PLUG complete power down can any apparatus other than the electric shock, personal INFORMATION: cause damage to the blade tamper to push ingredients injury, or product damage. coupling or motor gear. toward the blade. The tamper • Your NutriBullet® Blender has is specifically designed not • The use of attachments, a polarized plug (one prong 4 including canning jars, is 5
is wider than the other) to (underneath the motor when ingested: apple seeds, specify the machine model to reduce the risk of electric base) should be free of dust cherry pits, plum pits, peach ensure you receive parts that shock. This plug will correctly or lint and never obstructed pits, and apricot pits. Fruit are compatible with your unit. fit in a polarized outlet only with flammable materials pits may also cause damage • Periodically inspect all one way. If the plug does not such as newspapers, to the pitcher. NutriBullet® Blender fit fully in the outlet, reverse tablecloths, napkins, ADDITIONAL components for damage the plug. If it still does not fit, dishtowels, place mats or or wear that may impair contact a qualified electrician. other similar type materials. INSTRUCTIONS FOR proper function or present an For your safety, do not modify PROPER USAGE • CAUTION! Always operate electrical hazard. Make sure the plug or motor base in any the NutriBullet® Blender that the power cord and plug way. Doing so will increase • Do not place any of the on a level surface, leaving are undamaged. Discontinue risk of injury and void the NutriBullet® Blender parts unobstructed space beneath use and replace blending product’s warranty. in a microwave, oven, in a and around the motor base to vessels if you detect cracking, stovetop pot, or immerse in • This appliance has important permit proper air circulation. cloudiness, or damage to boiling water, as this may markings on the plug. The Vents on the bottom of the the plastic. Ensure that the result in damage to the part. attachment plug or entire product are provided for blades rotate freely and that cord set is not suitable for ventilation to ensure reliable • TO AVOID LEAKAGE, DO NOT the structure is undamaged. replacement. If damaged, the motor operation and to OVERFILL THE PITCHER! Make sure that the motor appliance will be replaced. prevent overheating. Your pitcher is marked with base is unobstructed and two MAX lines: one for solid clean. Follow maintenance STOVE-TOP MEDICAL SAFET Y ingredients (higher line) and recommended in the User HEATING SAFET Y • The information contained in one for liquids (lower line). Guide and never operate When filling the blender, WARNING! the User Guide and Recipe your NutriBullet® Blender To heat items that have been make sure your ingredients with damaged components. Guide is not meant to replace blended at room temperature do not exceed their respective If your NutriBullet® Blender the advice of your physician. or cooler (21°C/70°F or MAX lines. Exceeding either malfunctions in any way, Always consult your physician less), transfer mixture to a MAX line can result in immediately discontinue use regarding health and stovetop pot to heat. Always leakage, and may lead to and contact customer service use a thermometer to test nutrition concerns. dangerous pressurization, at 1-800-523-5993. You may the internal temperature of MEDICATION INTERACTIONS: which can cause the vessel purchase new NutriBullet® cooked ingredients; they may and blade assembly to cups, pitchers, and easy- feel cool to the touch, yet still • If you are taking any medication, especially separate, potentially resulting twist extractor blades be hot inside. in personal injury and/or at nutribullet.com or by cholesterol-lowering ! Save The NutriBullet® Blender medication, blood property damage. contacting customer service. is not intended for use on thinners, blood pressure • The pitcher is specific to the the stove top. Do not place the motor base or any drugs, tranquilizers, or antidepressants, please check exact model of NutriBullet® these instructions! Blender you possess. Use of NutriBullet® accessory on the with your physician before incompatible parts (parts stove or immerse in boiling trying any of the recipes from other models) may water. This may result in contained in this user guide or result in damage to your If you have any comments, damage to the accessory. recipe guide. NutriBullet® Blender or questions, or concerns, please create safety hazards. When go to nutribullet.com. VENTILATION WARNINGS • Avoid blending the following ordering replacement parts seeds and pits, as they Or call customer service at: • To prevent a fire hazard, contain a chemical known to on nutribullet.com or via power base openings customer service, please 1-800-523-5993. release cyanide into the body 6 7
Contents. 10 What’s included 11 Assembly guide 12 Getting started 12 Safety guide 13 Pitcher assembly & use 16 Blending control panel 17 How to use the blending control panel 18 Care & maintenance 18 How to clean the NutriBullet® 19 How to store 19 Replacement parts 20 NutriBullet® Blender’s one-year limited warranty 23 Warranty Registration 8 Thank you for purchasing the NutriBullet® Blender. 9
What’s included. Assembly guide. vented lid cap pitcher lid easy-pour spout tamper pitcher 1 pitcher with 1 pitcher lid integrated blade integrated blade with vented lid cap blender control panel motor base 1 motor base 1 tamper suction cup feet 10 11
Getting started. NOTE: The blending pitcher is Pitcher assembly marked with two MAX lines: one for solid ingredients & use. (higher line) and one for liquids (lower line). When filling the blender, make sure your ingredients do not exceed their respective MAX lines. PLEASE KEEP 1 Review all warning and THESE IMPORTANT caution statements in the SAFEGUARDS IN MIND Important Safeguards WHEN USING section (pg 3-9) and on the previous page before THE APPLIANCE: proceeding to Step 2. • Make sure the base is plugged in for use. 4 • DO NOT attempt to operate the Steam and splatters can escape Place the pitcher lid with WARNING! blender pitcher on the appliance through the vented lid, potentially vented lid cap attached on without attaching the pitcher lid and causing scalding and/or burns. vented lid cap. NEVER blend hot liquids in your the pitcher, making sure it’s pitcher without the pitcher lid aligned to the handle. • Never run the appliance while empty. • Appliance accessories are not and lid cap attached. The lid cap is ventilated to allow steam and 2 intended to be used in the microwave pressure to release, while guarding Place the motor base on as it may damage the accessories. against excess splashing. a clean, dry, level surface When blending hot liquids, add such as a counter or table. • Never leave the appliance unattended while in use. liquid and solid ingredients to your pitcher below their respective Use extra caution when MAX lines. Attach the pitcher lid blending hot liquids in with the lid cap inserted. Press the pitcher. the POWER icon, then begin blending on the LOW setting. Once 5 ingredients are integrated and the mixture is level (no splashing), Place the pitcher onto the increase speed as needed. motor base — handle facing to the right of the blending control panel, never towards the back — and gently twist clockwise so it locks in place. 3 When you hear the click, it’s Place the pitcher on a locked and ready to blend. clean, dry, level surface. Add the ingredients to the NOTE: If you are left-handed, place pitcher, making sure they do the handle facing towards the center not exceed the MAX line. of the blending control panel and twist clockwise. 12 13
NOTE: If you need to add additional ingredients while blending, switch the setting to LOW and remove the vented 6 lid cap from your pitcher lid, leaving the lid attached. Add 9 ingredients through the hole Plug the power cord into in the top of the lid, followed When you have reached an electrical outlet and press by the tamper if necessary. your desired consistency, POWER to turn on the Replace the vented lid cap, then pause/stop the appliance increase to your desired speed. blender. DO NOT attempt to add items by pressing POWER or the through the vent hole when speed you selected and wait blending hot ingredients. for the blades to stop turning. The unit will enter idle-mode. The POWER button will remain illuminated. 8 WARNING: Blades are sharp. Never insert your hands into the pitcher. If the ingredients stick to the side of the pitcher, stop the appliance by pressing 10 Press POWER to turn off POWER and wait for the unit completely. the blade to stop turning. LOW Then remove the pitcher lid and use the tamper to dislodge the ingredients. When finished, replace the 7 CAUTION: Do not use any lid and continue blending. apparatus other than the tamper to push ingredients if the ingredients continue To start blending, select toward the blade. The tamper to stick, consider adding a your speed on the blending is specifically designed not to little more liquid. control panel. come in contact with the blade. Spatulas, spoons and other tools are long enough to reach NOTE: Proceed to the blending control panel chart on page 16 for the blade, which may result in damage to the machine, 11 speed definitions. damage to property, and/or possible injury. Twist pitcher counterclockwise and lift off the motor base. Pour and enjoy! 14 15
Blending control panel. TURNING ON/OFF HIGH SPEED The power button actuates Use to liquefy thick mixtures the master power of the and extract frozen fruits and appliance. When pressed, this vegetables into smoothies. button lights up to indicate the motor is powered on, and the other functions can be used. Always turn the master power off and unplug the unit when the machine is not in use. LOW SPEED PULSE Use to mix thin batters, Use to control chopping gravies, marinades; scramble and processing. eggs; process cooked foods and uncooked fruits. WARNING: DO NOT use this setting with hot ingredients! How to use the blending control panel. MEDIUM SPEED TO SELECT A SPEED NOTE: When using the pitcher, speeds will run until paused/stopped. Use to cream soups, mix Select a speed and press once dips, grind nuts, and to turn on. The button will blend sauces, spreads, illuminate. To pause/stop the PULSE mixed drinks, powdered unit, press the button a second Press and release the PULSE drinks, and milkshakes. time — it will de-illuminate — or button to chop ingredients. press POWER . While in the If you hold the PULSE button idle-mode, the POWER button down it will continue to run until will remain lit. To fully power you release it. down after pausing, press POWER and unplug the unit. 16 17
Care & maintenance. Here’s how to clean • Do not attempt to remove any • Regularly check the STUBBORN CLEAN UP: pieces from the motor base. structure of the pitcher and the NutriBullet®: twisting threads for cracking, If ingredients dry inside the • Use a sponge or dish cloth NutriBullet® Blender, fill your crazing, or breakage. STEP 1: dampened with warm soapy vessel with water to the liquid If damaged, replace water to wipe down the MAX line and add 1-2 drops of The most important thing — immediately to prevent motor base until clean. dish soap. Attach the pitcher lid ALWAYS POWER OFF THE UNIT possible personal injury. with the vented lid cap inserted, and UNPLUG the motor base • To clean leakage residue • NEVER USE A PITCHER and place the pitcher on the from the power outlet when it from the motor base, wipe THAT DOES NOT PROPERLY motor base. Blend on LOW is not in use. Do not attempt to with a damp sponge and ALIGN WITH THE BLADE. for 20-30 seconds; this should handle the appliance until all warm water. Doing so may cause the loosen any remaining debris. parts have stopped moving! • If necessary, you may use pitcher and motor base to This includes during assembly and disassembly, while a small brush to scrub the actuator system area to separate, exposing the blade assembly and How to store: changing accessories during ensure it’s clean. potentially causing severe cleaning, and any time you Store the NutriBullet® pitcher personal injury. leave the machine unattended. WARNING: Never submerge upright with the pitcher lid the motor base in water. secured on top. Do not place TAMPER STEP 2: anything on top of the pitcher NUTRIBULLET PITCHER: ® • Always hand-wash the lid. Store remaining pieces in a Detach the NutriBullet® pitcher tamper with soap and water. safe place where they will not WARNING: Blades are sharp! from the motor base. Stuck-on ingredients might be damaged and won’t Use caution when cleaning the pitcher. require extra scrubbing from cause harm. STEP 3: a dish brush or sponge. • The pitcher is dishwasher- Clean the individual safe. We recommend rinsing components (motor base & and briefly scrubbing it with pitcher) as recommended in the a dish brush to remove any following pages. remaining debris before Replacement parts. placing in the dishwasher. MOTOR BASE: NEVER use the sanitize cycle to wash the pitcher — heat • To avoid risk of injury, NEVER this high can warp the plastic. attempt to clean the actuator system on the motor base • If preferred, hand-wash the To order additional parts and accessories, please visit our website while the NutriBullet® Blender pitcher with soap and water. at nutribullet.com/shop/accessories or feel free to contact is plugged in. Stuck-on ingredients might customer service: 1.800.523.5993. require extra scrubbing from a dish brush or sponge. 18 19
Nutribullet Blender ® the original purchase (receipt) containing a description of the This limited warranty extends only to the original consumer purchaser and is not one-year limited product(s), purchase date, and the appropriate NutriBullet® transferable. In addition, proof of serial number(s). Before you purchase must be demonstrated. warranty. send your product for limited warranty service please make Repair or replacement of sure to keep a copy of all the product (or, if repair or relevant documents for your replacement is not feasible, a files (receipt, etc.). It is always refund of the purchase price) recommended to purchase is the exclusive remedy of the LIMITED WARRANTY equivalent to the original product insurance and tracking consumer under this limited FOR NUTRIBULLET ® product, or (3) refund the services when sending your warranty. NutriBullet, LLC shall purchase price of the product. A product for service. Remember, not be liable for any incidental NutriBullet’s limited warranty replacement product assumes shipping and processing fees or consequential damages for obligations are confined to the the remaining warranty of the will be incurred and are not breach of this limited warranty terms set forth below: original product. A repaired covered by the one-year or any implied warranty on product has a one-year limited warranty. this product. NutriBullet, LLC (“NutriBullet”) warranty from the date of warrants this NutriBullet® repair. When a product or part EXCLUSIONS & LIMITATIONS This limited warranty gives against defects in materials is exchanged, any replacement you specific legal rights, and and workmanship for a period This NutriBullet® One- item becomes your property you may also have other rights of one year from the date Year Limited Warranty and the replaced item becomes which vary from state to state. of original retail purchase. applies only to NutriBullet® NutriBullet’s property. When a NutriBullet® is not liable for This limited warranty is valid products distributed by or refund is given, your product any damage to products not only in the country in which for NutriBullet® that can be becomes NutriBullet’s property. covered by this warranty (e.g., the product is purchased identified by the “NutriBullet” cups, book, User Guide). and comes with the product trademark, trade name, logo OBTAINING WARRANTY at no extra charge, however and bar code. NutriBullet® SERVICE This limited warranty does not shipping and processing fees Blender’s One-Year Limited apply: (a) to damage caused will be incurred for returns, For limited warranty service, Warranty does not apply to by accident, abuse, misuse, replacements and or refunds. simply call our customer any other products that may or misapplication; (b) to service department at 1-800- appear to be authentic, but damage caused by improper If a defect exists, and 523-5993 or contact us via were not distributed/sold by maintenance (including NutriBullet® is obligated under email from our website at NutriBullet, LLC. unauthorized parts service); this limited warranty, at its nutribullet.com, simply click (c) to a product or a part that option NutriBullet® will (1) repair the contact us link, fill out and Normal wear and tear is not has been modified in any way; the product at no charge, using submit the customer contact covered by this limited warranty. (d) if any NutriBullet® serial new or refurbished replacement form and we will be glad to number or trademark has been parts, (2) exchange the product help you. When you contact our This limited warranty applies removed or defaced; and or (e) with a product that is new or customer service department to consumer use only, and if the product has been used that has been manufactured you will be asked for your is void when the product with an adapter/converter. from new or serviceable used name, address, telephone is used in a commercial or parts and is at least functionally number and to provide proof of institutional setting. 20 21
THIS LIMITED WARRANTY NUTRIBULLET IS NOT AND THE REMEDIES SET RESPONSIBLE FOR DIRECT, FORTH ABOVE ARE EXCLUSIVE SPECIAL, INCIDENTAL OR Warranty registration. AND IN LIEU OF ALL OTHER CONSEQUENTIAL DAMAGES WARRANTIES, REMEDIES RESULTING FROM ANY AND CONDITIONS, WHETHER BREACH OF WARRANTY ORAL OR WRITTEN, EXPRESS OR CONDITION, OR UNDER OR IMPLIED. NUTRIBULLET® ANY OTHER LEGAL THEORY, SPECIFICALLY DISCLAIMS ANY INCLUDING BUT NOT LIMITED Please visit nutribullet.com/ AND ALL IMPLIED WARRANTIES, TO LOST PROFITS, DOWNTIME, warranty-registration or call INCLUDING, WITHOUT GOODWILL, DAMAGE TO 1.800.523.5993 to register your LIMITATION, WARRANTIES OR REPLACEMENT OF new NutriBullet® Blender. You OF MERCHANTABILITY AND EQUIPMENT AND PROPERTY. will be asked to enter the Serial FITNESS FOR A PARTICULAR NUTRIBULLET® SPECIFICALLY Number* of your product, PURPOSE. IF NUTRIBULLET DOES NOT REPRESENT THAT along with the purchase date CANNOT LAWFULLY DISCLAIM IT WILL BE ABLE TO REPAIR and place of purchase. IMPLIED WARRANTIES UNDER ANY PRODUCT UNDER THIS THIS LIMITED WARRANTY, LIMITED WARRANTY. The registration will enable ALL SUCH WARRANTIES, us to contact you in the INCLUDING WARRANTIES Some states and provinces unlikely event of product OF MERCHANTABILITY AND do not allow the exclusion safety notification. By FITNESS FOR A PARTICULAR or limitation of incidental registering you acknowledge PURPOSE ARE LIMITED IN or consequential damages to have read and understood DURATION TO THE DURATION or exclusions or limitations the instructions for use, and OF THIS LIMITED WARRANTY. on the duration of implied warnings set forth in the How to find serial number No NutriBullet® reseller, agent, or warranties or conditions, accompanying instructions. under the motor base. employee is authorized to make so the above limitations or any modification to this warranty. exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary by state or province. 22 23
1.800.523.5993 | nutribullet.com NutriBullet, LLC | www.nutribullet.com | All rights reserved. NutriBullet and the NutriBullet logo are trademarks of CapBran Holdings, LLC registered in the U.S.A. and worldwide. Illustrations may differ from the actual product. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice. 191009_NBF50400_ZNBF30400Z
® BLENDER Guide de l’utilisateur.
Importantes mesures de sécurité. Avertissement ! Pour éviter tout risque de blessure grave, veuillez lire attentivement toutes les instructions avant d’utiliser votre NutriBullet®. Lorsque vous utilisez un appareil électrique, des précautions d’utilisation élémentaires doivent toujours être respectées, concernant notamment les informations suivantes: ! Conservez ces instructions! À USAGE DOMESTIQUE UNIQUEMENT CONSIGNES GÉNÉRALES SÉCURITÉ THERMIQUE DE SÉCURITÉ & PRESSION • Une surveillance étroite est • Faites toujours preuve nécessaire lorsqu’un appareil d’extrême précaution et électrique est utilisé par attention lors de l’utilisation des enfants ou à proximité d’ingrédients très chauds d’enfants. Tenir le cordon dans tout appareil à mixer, d’alimentation hors de portée car le frottement des lames des enfants. Cet appareil rotatrices (pendant le électrique n’est pas un jouet, processus du mixage) combiné ne leur permettez pas de avec l’énergie thermique des jouer avec. ingrédients chauffés peut • Ne pas utiliser à l’extérieur. engendrer une situation dangereuse si elle n’est pas • NE JAMAIS LAISSER LE correctement contrôlée. NUTRIBULLET® SANS SURVEILLANCE PENDANT Faites preuve de prudence SON UTILISATION. supplémentaire lorsque • TOUJOURS ARRÊTER LE vous mixez des liquides NUTRIBULLET® LORSQUE très chauds dans le pichet. VOUS NE L’UTILISEZ PAS. N’activez jamais l’appareil lorsque le pichet est utilisé sans le capuchon de ventilation du couvercle 27
en place et bien verrouillé bien incorporés, ajustez la éteint pour retirer le pichet • Pour les recettes qui AVERTISSEMENT! sur le couvercle du vitesse si nécessaire. du socle électrique. Retirer nécessitent que certains le récipient de mixage ingrédients soient incorporés pichet, car les ingrédients Si le NutriBullet® fonctionne avant la mise hors tension au cours du mixage, ajoutez très chauds ou chauds, pendant plus d’une minute, complète peut endommager d’abord les ingrédients de la friction des lames lors du pourraient provoquer mixage peut augmenter l’assemblage de la lame base, fixez le couvercle du des éclaboussures, ce qui d’extraction facile à tourner pichet muni de son capuchon la chaleur des ingrédients ou le moteur. de ventilation bien en place, pourrait potentiellement et générer une pression et commencer à mixer. Puis, entraîner des blessures interne dans le récipient. Si Ne faites jamais une fois que les ingrédients le récipient devient chaud thermiques ou des fonctionner votre sont bien mélangés, ouvrez au toucher, arrêtez l’appareil dommages matériels. mélangeur NutriBullet® le capuchon du couvercle et laissez le récipient se de ventilation en le tournant, La vapeur et les refroidir totalement avant de Blender, sans ajouter un et versez ou ajoutez AVERTISSEMENT! éclaboussures émanant l’ouvrir avec précaution, et en liquide, car ceci pourrait précautionneusement les l’orientant loin de votre corps des ingrédients peuvent endommager les lames. ingrédients dans le mélange. s’échapper par le couvercle pour éviter toute blessure. du pichet, et entraîner • L’action cyclonique® de votre • Si vous avez besoin de éventuellement des brûlures SÉCURITÉ REL ATIVE mélangeur NutriBullet® pousser des ingrédients Blender nécessite l’utilisation plus près de la lame, superficielles et / ou plus AUX L AMES sérieuses à l’utilisateur. de liquides pour préparer UTILISEZ UNIQUEMENT LE NE JAMAIS mixer des Les lames sont tranchantes! des smoothies ou d’autres POUSSOIR CI-INCLUS avec AVERTISSEMENT! liquides très chauds Manipulez-les avec concoctions nutritives. Le le mélangeur NutriBullet® dans votre pichet sans le précaution. Soyez vigilants mélangeur NutriBullet® Blender. NE PAS utiliser capuchon de ventilation du lors de la manipulation Blender n’est pas conçu pour quelqu’autre objet pour couvercle en place et bien des lames. Afin d’éviter des être utilisé sans liquide ou pousser les ingrédients vers verrouillé. Le capuchon blessures par lacération, ne pour piler la glace. AJOUTEZ la lame. Le poussoir est de ventilation permet à la pas manipuler ou toucher TOUJOURS UN LIQUIDE à spécifiquement conçu pour vapeur et à la pression de l’arête de la lame. votre recette. ne pas entrer en contact s’échapper, évitant un excès avec la lame. Les spatules, ÉVITEZ LE CONTACT AVEC • N’UTILISEZ PAS la lame d’éclaboussures. cuillères ou autres outils DES PIÈCES EN MOUVEMENT! d’extraction facile à tourner peuvent entrer en contact Lors du mixage de liquides Tenez vos mains et les pour broyer des ingrédients avec la lame, ce qui pourrait très chauds, ajoutez les ustensiles à l’écart des secs tels que les légumineuses, provoquer des dommages ingrédients liquides et solides lames pendant le mixage les céréales ou le café car à l’appareil, des dégâts dans votre pichet sans des aliments afin de réduire cela pourrait endommager matériels et /ou d’éventuelles dépasser leur ligne MAX les risques de blessures le moteur et / ou la lame blessures corporelles. respectives. Fixez le couvercle corporelles sérieuses. d’extraction facile à tourner. du pichet avec son bouchon • NE JAMAIS VOUS SERVIR DE • Á la fin du mixage, tourner SÉCURITÉ REL ATIVE de ventilation en place et VOS DOIGTS OU D’UNE TOUTE le bouton d’alimentation bien verrouillé. Poussez sur AU PICHET AUTRE PARTIE DE VOTRE pour éteindre l’appareil. POWER et commencer à MAIN POUR POUSSER LES Attendez que le moteur se • Toujours faire fonctionner le mixer à la vitesse LOW. Une INGRÉDIENTS VERS LE BAS DE soit totalement arrêté et que pichet avec le couvercle du fois que les ingrédients sont LA LAME. Utilisez uniquement l’appareil soit complètement pichet bien en place. le poussoir ci-inclus. 28 29
Souvenez-vous d’être • L’utilisation d’accessoires, • Si le moteur cesse de être remplacement. S’il est encore plus vigilant notamment de bocaux, fonctionner, débranchez le endommagé, l’appareil n’est pas recommandée socle électrique et laissez- sera remplacé. lorsque vous mixez des et pourrait provoquer un le se refroidir pendant au liquides ou des ingrédients incendie, un choc électrique, moins 15 minutes avant SÉCURITÉ REL ATIVE très chauds dans le pichet. des blessures corporelles ou de tenter de l’utiliser à AU RÉCHAUFFAGE des dégâts à l’appareil, ce nouveau. Votre mélangeur SUR CUISINIÈRE • La vapeur qui jaillit ou qui qui annulerait et la garantie NutriBullet® Blender possède s’échappe peut provoquer sur l’appareil. un disjoncteur thermique Pour réchauffer des AVERTISSEMENT! des brûlures et / ou des interne qui arrête le moteur ingrédients qui ont été mixés dégâts matériels. • Pour éviter tout risque à température ambiante en cas de surchauffe. Le de choc électrique, ne ou plus basse (à 21°C / 70°F Ne pas remplir le récipient disjoncteur thermique se AVERTISSEMENT! jamais plonger le cordon ou moins), transférez le au-delà des lignes de réinitialisera lorsque l’appareil d’alimentation, la fiche mélange dans une casserole capacité maximale indiquées aura été débranché et que le ou le socle électrique du conçue pour un réchauffage pour les liquides et les disjoncteur thermique se sera mélangeur NutriBullet® sur une cuisinière. Utilisez ingrédients solides. suffisamment refroidi. Blender dans de l’eau ou toujours un thermomètre Toujours commencer à mixer dans tout autre liquide. INFORMATIONS SUR pour tester la température les ingrédients très chauds à Cessez toute utilisation si le LA FICHE POLARISÉE: interne des ingrédients cuits; la vitesse LOW. cordon d’alimentation, la • Votre mélangeur NutriBullet® ils peuvent sembler froids fiche ou le socle électrique Blender est doté d’une au toucher, mais être encore Tenez vos mains et les autres est endommagé. parties exposées de votre fiche polarisée (une broche très chauds à l’intérieur. peau loin de l’ouverture du • ÉTEIGNEZ et DÉBRANCHEZ est plus large que l’autre) Le mélangeur NutriBullet® couvercle pour éviter de toujours le mélangeur afin de réduire le risque de Blender n’est pas conçu possibles brûlures. NutriBullet® Blender lorsqu’il choc électrique. Cette fiche pour être utilisé sur une n’est pas utilisé ou AVANT de s’insérera correctement dans cuisinière. Ne placez pas le SÉCURITÉ REL ATIVE l’assembler, de le démonter, une prise polarisée dans socle électrique et tout autre À L’ÉLECTRICITÉ de changer d’accessoires ou un seul sens uniquement. accessoire NutriBullet® sur de le nettoyer. N’essayez pas Si la fiche ne s’insère pas N’utilisez pas cet appareil une cuisinière, ne les plongez complètement dans la prise, AVERTISSEMENT! de manipuler votre mélangeur pas non plus dans de l’eau dans des endroits où les NutriBullet® Blender avant que inversez-la. Si le problème spécifications électriques bouillante. Cela pourrait toutes les pièces n’aient cesser persiste, contactez un ou les types de fiches sont provoquer des dommages à de tourner. électricien qualifié. Pour différents. Ne le faites l’accessoire. votre sécurité, ne modifiez pas fonctionner avec • Ne laissez pas le cordon d’aucune façon la fiche ou un adaptateur de prise d’alimentation pendre du le socle électrique, car cela AVERTISSEMENT ou un convertisseur de bord de la table ou du augmenterait le risque de RELATIF À LA tension quelconque, car comptoir de cuisine. Ne blessures et annulerait la VENTILATION ces utilisations pourraient tirez pas sur le cordon garantie sur l’appareil. d’alimentation, ne le laissez Pour éviter tout risque AVERTISSEMENT! provoquer un court-circuit, un incendie, un choc électrique, pas s’entortiller ou s’abîmer. • Cet appareil a d’importantes d’incendie, les ouvertures des blessures corporelles ou Ne laissez pas le cordon marques sur la fiche. La du socle électrique des dégâts à l’appareil. d’alimentation toucher fiche de fixation ou le cordon (situées à la base du socle des surfaces chaudes, entière n’est pas conçu pour électrique) doivent être notamment la cuisinière. dépourvues de poussière ou 30 31
de peluches et ne doivent antihypertenseurs, des l’autre pour les liquides (ligne de mixage si vous détectez jamais être obstruées par tranquillisants ou des inférieure). Lorsque vous des craquelures, une opacité des matériaux inflammables antidépresseurs, veuillez remplissez le pichet, assurez- ou d’autres dégâts sur le comme des journaux, consulter votre médecin vous que les ingrédients ne plastique. Assurez-vous que nappes, serviettes de table, avant d’essayer toute dépassent pas leur ligne MAX les lames tournent librement torchons, sets de table recette contenue dans ce respective. Le dépassement et que la structure n’est pas ou sur tout autre type de guide de l’utilisateur ou le des lignes MAX indiquées peut endommagée. Assurez-vous matériau similaire. guide de recettes. provoquer des débordements que le socle électrique est et créer une dangereuse dégagé et propre. Suivez les • ATTENTION! Toujours faire • Évitez de mixer les pépins pressurisation. recommandations concernant fonctionner le mélangeur ou noyaux suivants dans • Le pichet est spécifiques au l’entretien développées dans NutriBullet® Blender sur une le mélangeur Nutribullet® modèle précis du mélangeur le Guide de l’Utilisateur, et surface plane, en laissant un Blender, car ils contiennent NutriBullet® Blender que ne faites jamais fonctionner espace non obstrué sous et une substance chimique vous possédez. L’utilisation votre mélangeur NutriBullet® autour du socle électrique afin libérant du cyanure dans le de pièces incompatibles Blender avec des éléments de permettre une circulation corps lorsqu’ils sont ingérés: (pièces d’autres modèles) constituants endommagés. d’air adéquate. Les ouvertures pépins de pomme, noyaux peut endommager votre Si votre mélangeur de ventilation à la base de de cerises, de pruneaux, mélangeur NutriBullet® NutriBullet® Blender l’appareil sont conçues pour de pêches et d’abricots. Les Blender ou créer des risques présente un quelconque assurer la ventilation afin de noyaux des fruits peuvent pour votre sécurité. Lorsque dysfonctionnement, cessez garantir un fonctionnement également provoquer des vous commandez des immédiatement son fiable du moteur et d’éviter dommages à votre pichet. pièces de remplacement utilisation et contactez le ainsi une surchauffe. sur nutribullet.com, ou RECOMMANDATIONS service clientèle au 1-800- en contactant le service SÉCURITÉ REL ATIVE À 523-5993. Vous pouvez SUPPLÉMENTAIRES POUR clientèle, veuillez spécifier acheter de nouveaux pichets L A SANTÉ UNE BONNE UTILISATION le modèle de votre appareil, à nutribullet.com ou en afin de vous assurer • Les informations contenues • Ne placez aucune pièce que vous recevrez des contactant le service clientèle. ! dans ce Manuel de du mélangeur NutriBullet® pièces compatibles avec l’Utilisateur ou dans le Guide de Recettes ne sont Blender dans un four à micro-ondes, au four ou votre appareil. Conservez ces pas censées remplacer les conseils de votre médecin. dans un récipient conçu pour la cuisinière, ne la plongez • Inspectez périodiquement votre mélangeur NutriBullet® instructions! Consultez toujours votre Blender et ses éléments pas non plus dans de l’eau Si vous avez des commentaires, médecin pour des questions constituants pour vous bouillante, car cela pourrait des questions ou des problèmes, relatives à la santé et à assurer qu’ils ne sont pas endommager la pièce. veuillez-vous rendre sur l’alimentation. endommagés ou usés, ce • POUR ÉVITER LES qui pourrait affecter son bon nutribullet.com. INTERACTIONS DÉBORDEMENTS, NE fonctionnement ou présenter Ou appeler le service MÉDICAMENTEUSES: REMPLISSEZ PAS TROP LE un danger d’ordre électrique. clientèle au numéro suivant: • Si vous prenez des PICHET! Le pichet comporte Assurez-vous que le cordon 1-800-523-5993. médicaments, en particulier deux marques correspondant d’alimentation et la fiche des médicaments aux deux lignes MAX: l’une ne sont pas endommagés. hypocholestérolémiants, pour les ingrédients solides Cessez d’utiliser l’appareil des anticoagulants, des (la ligne supérieure), et et remplacez les récipients 32 33
Table des matières. 36 Ce qui est inclus 37 Guide d’assemblage 38 Mise en route 38 Guide de sécurité 39 Assemblage & utilisation du pichet 42 Panneau de commande du mélangeur 43 Comment utiliser le panneau de commande du mélangeur 44 Entretien & maintenance 44 Comment nettoyer le NutriBullet® 45 Comment le ranger 45 Pièces de rechange 46 La garantie NutriBullet® Blender limitée à un an 49 Enregistrement de la garantie Nous vous remercions d’avoir acheté le mélangeur NutriBullet® Blender. 34 35
Ce qui est inclus. Guide d’assemblage. capuchon de ventilation du couvercle couvercle du pichet bec verseur conception pratique poussoir pichet pichet avec couvercle pour pichet lame intégrée lame intégrée avec capuchon de ventilation panneau de commande du mélangeur socle électrique socle électrique poussoir pieds à ventouse 36 37
Assemblage du liquides (ligne inférieure). Lorsque Mise en route. pichet & utilisation. vous remplissez le mélangeur, assurez-vous que les ingrédients 1 Revoir tous les et le liquide ne dépassent pas leur ligne MAX respective. avertissements et mises en garde dans la section « Importantes Précautions d’emploi » (p. 2 à 11) et sur la page précédente avant VEUILLEZ PRENDRE EN procéder à l’Étape 2. COMPTE CES IMPORTANTES PRÉCAUTIONS D’EMPLOI LORS DE L’UTILISATION DE L’APPAREIL : 4 • Assurez-vous que le socle est Fixer le couvercle du pichet branché pour l’utilisation. 2 avec son capuchon de • NE PAS essayer de faire fonctionner Placer le socle électrique sur ventilation en place sur le le pichet du mélangeur sur une surface plane, propre, pichet, en vous assurant De la vapeur et des éclaboussures WARNING! l’appareil sans fixer le couvercle du peuvent s’échapper du capuchon et sèche comme un comptoir qu’il soit bien aligné avec la pichet et le capuchon de ventilation de ventilation, pouvant ou une table. poignée. du couvercle. potentiellement provoquer des • Ne faites jamais fonctionner brûlures superficielles et / ou plus l’appareil lorsqu’il est vide. sérieuses. Ne mixez JAMAIS des liquides très chauds dans votre • Les accessoires de l’appareil ne pichet sans son couvercle et son sont pas destinés à être utilisés au capuchon en place. Le capuchon four micro-ondes car cela pourrait de ventilation permet à la vapeur les endommager. et à la pression de se libérer, • Ne laissez jamais l’appareil sans tout en vous protégeant des surveillance lors de l’utilisation. éclaboussures excessives. Soyez encore plus vigilant lors Lorsque vous mixez des liquides très chauds, ajoutez les ingrédients 3 5 du mixage de liquides très liquides et solides dans votre Placer le pichet sur le socle Placer le pichetsur une chauds dans le pichet. pichet en-deçà de leur ligne MAX électrique — la poignée respective. Fixez le couvercle du surface plane, propre, et sèche comme un faisant face à la droite du pichet avec le capuchon en place. panneau de commande du Pressez sur l’icône POWER , puis comptoir ou une table. mélangeur, jamais orienté commencez à mixer à la vitesse Ajouter les ingrédients vers l’arrière — et visser LOW. Une fois que les ingrédients dans le pichet, en sont incorporés et que le mélange doucement dans le sens est de niveau (pas d’éclaboussures), vous assurant qu’ils ne des aiguilles d’une montre augmentez la vitesse si nécessaire. dépassent pas la ligne pour le verrouiller en place. MAX. Lorsque vous entendez le clic, il est verrouillé et prêt REMARQUE : Le pichet du à mixer. mélangeur comporte deux marques correspondant aux REMARQUE : Si vous êtes gaucher, deux lignes MAX: l’une pour placez la poignée tournée vers le les ingrédients solides (la ligne centre du panneau de commande supérieure), et l’autre pour les du mélangeur et tournez dans le 38 39
REMARQUE: Si vous devez ajouter des ingrédients supplémentaires durant le mixage, changez le réglage de la vitesse à LOW et enlevez le capuchon de ventilation du couvercle de votre pichet, tout en laissant le couvercle en place. Ajoutez les ingrédients à 6 travers le trou de ventilation du couvercle, et utilisez le poussoir si 9 nécessaire. Replacez le capuchon Quand vous avez obtenu la Brancher le cordon de ventilation du couvercle, puis consistance désirée, arrêtez d’alimentation dans une augmenter à la vitesse de votre l’appareil en poussant sur choix. NE PAS essayer d’ajouter prise électrique et pousser POWER ou sur la vitesse des aliments à travers le trou de sur POWER pour allumer ventilation lorsque vous mixez que vous aviez sélectionnée le mélangeur. des ingrédients très chauds. et attendez que les lames s’arrêtent de tourner. L’appareil se mettra en mode veille. Le bouton POWER restera allumé. 8 AVERTISSEMENT: Les lames sont tranchantes. Ne jamais mettre vos Si les ingrédients collent sur mains à l’intérieur du pichet. les côtés du pichet, arrêtez l’appareil en poussant sur 10 LOW Poussez sur POWER pour POWER et attendez que arrêter complètement l’appareil. la lame s’arrête de tourner. 7 Puis retirez le couvercle du pichet et utilisez le Pour commencer le mixage, poussoir pour déloger sélectionnez une vitesse sur les ingrédients. Lorsque ATTENTION: Ne jamais utiliser le panneau de commande d’ustensiles autres que le poussoir c’est terminé, replacez le du mélangeur. pour pousser les ingrédients couvercle et reprenez le vers la lame. Le poussoir est mixage. Si les ingrédients REMARQUE: Reportez-vous au spécialement conçu pour ne continuent à coller, tableau relatif au panneau de pas entrer en contact avec la envisagez d’ajouter un peu commande à la page 18 pour les lame. Les spatules, cuillères et définitions des vitesses. autres outils, sont suffisamment plus de liquide. longs pour atteindre la lame, 11 ce qui pourrait provoquer des dommages à l’appareil, des Dévissez le pichet dans le dégâts matériels et de possibles sens contraire des aiguilles blessures corporelles. d’une montre, et soulevez-le du socle électrique. Versez et dégustez ! 40 41
MED HIGH Panneau de commande BA LO S U LS IO N du mélangeur. W IMPULSE P MOYEN ELEVÉ MED HIGH MARCHE/ARRÊT FONCTION « PULSE » BA LO S W U LS IMPULSE IO N L’interrupteur d’allumage BA LO S W U LS IMPULSE IO N Utilisé pour contrôler le sert à activer l’ensemble P P hachage et le traitement. MOYEN ELEVÉ MOYEN ELEVÉ MED HIGH MED HIGH des fonctions de l’appareil. Lorsqu’il est poussé, le bouton AVERTISSEMENT : NE s’allume pour indiquer que le PAS utiliser cette mise avec moteur est allumé, et que les des ingrédients chauds ! BA LO S W U LS IMPULSE ION autres fonctions peuvent être BA MOYEN MED ELEVÉ HIGH P U LS ION utilisées. Toujours éteindre le LO S IMPULSE W P bouton principal de mise en Comment utiliser le panneau de MOYEN ELEVÉ BA ION U LS route et débrancher l’appareil LO S MED HIGH W IMPULSE P MOYEN ELEVÉ lorsqu’il n’est pas utilisé. commande du mélangeur. MED HIGH BA ION LO S U LS IMPULSE FAIBLE VITESSE W P BA MOYEN ELEVÉ S ION LO S UL MED IMPULSE POUR SÉLECTIONNER MODE « PULSE » W HIGH P N BA LO S MOYEN ELEVÉ U LSIO IMPULSE À utiliser pour mixer les pâtes UNE VITESSE W MED HIGH P légères ; les sauces au jus de MOYEN BA LO S W MED ELEVÉ HIGH U LS IMPULSE P ION Poussez et relâchez le bouton MOYEN MED ELEVÉ HIGH viande, les marinades ; brouiller Sélectionnez une vitesse et PULSE pour hacher les des œufs ; transformer les poussez une fois sur le bouton ingrédients. Si vous continuez BA LO S W U LS IMPULSE ION aliments cuits et les fruits crus. pour la mise en marche. Le d’appuyer sur le bouton PULSE, BA MOYEN MED ELEVÉ HIGH P ION bouton va s’allumer. Pour il continuera à fonctionner U LS interrompre l’appareil ou LO S W BA LO S MOYEN ELEVÉ IMPULSE P UL S ION VITESSE MOYENNE jusqu’à ce que vous le relâchiez. IMPULSE l’arrêter, appuyez sur le W MED HIGH P MOYEN ELEVÉ ION À utiliser pour réaliser des BA MED U LS bouton une seconde fois — il LO S HIGH IMPULSE W P soupes veloutées, mixer les MOYEN ELEVÉ MED HIGH va s’éteindre — ou poussez trempettes, broyer les fruits à sur POWER . Lorsqu’il sera coque et mélanger les sauces, IO N BA LO S W U LS IMPULSE P en mode veille, le bouton MOYEN MED ELEVÉ HIGH les tartinades, les boissons POWER restera allumé. Pour ION à mixer, les boissons en BA S U LS N IMPULLSSEIO l’éteindre complétement après LO BWA LO S PU IMPULSE W MOYEN BA LO S MM OYEDEN MED ELEVÉ GH HIEV EL HIGH É P U LS ION poudre ou les laits frappés. la pause, poussez sur POWER W IMPULSE et débranchez l’appareil. P MOYEN ELEVÉ MED HIGH VITESSE ÉLEVÉE N NOTE: Si vous utilisez le pichet, Utilisez pour liquéfier les BA IO LO S U LS W IMPULSE P les vitesses fonctionneront jusqu’à mélanges épais et mélanges MOYEN ELEVÉ MED HIGH ce que l’appareil soit mis en mode BA U LS ION congelés fruits et légumes. pause, ou arrêté. LO S IMPULSE W P MOYEN ELEVÉ BA ION LO S MED HIGH U LS W IMPULSE 42 43 P MOYEN ELEVÉ MED HIGH
Entretien une brosse à vaisselle pour enlever toute particule restante NETTOYAGE DE PARTICULES TENACES : & maintenance. avant de le placer dans le lave- Si des ingrédients restent coincés vaisselle. NE JAMAIS utiliser le dans le pichet NutriBuIlet®, voici cycle de désinfection pour laver une solution facile de nettoyage : le pichet — une température remplissez le récipient d’eau à si intense pourrait déformer Voici comment système d’activation sur le le plastique. température ambiante (21°C / socle électrique, lorsque 70°F ou plus fraîche) à hauteur nettoyer votre le mélangeur NutriBullet® • Si vous préférez, lavez le de la ligne MAX et ajoutez 1 à NutriBullet® : Blender est branché. pichet à la main dans de l’eau 2 gouttes de liquide vaisselle. savonneuse. Les ingrédients Fixez le couvercle du pichet, • N’essayez pas de retirer ÉTAPE 1 : restés collés pourraient placez-le sur le socle électrique une pièce quelconque du nécessiter un brossage plus et mixez durant 20 à 30 secondes La chose la plus importante: socle électrique. poussé avec une brosse à également. Cela devrait TOUJOURS ÉTEINDRE L’APPA- • Utilisez une éponge ou un vaisselle ou une éponge. suffisamment détacher les REIL et DÉBRANCHER le socle chiffon imbibé d’eau tiède particules restantes pour n’avoir électrique de la prise de secteur • Vérifiez régulièrement la savonneuse pour nettoyer le plus qu’à brosser avec de lorsqu’il n’est pas utilisé. N’essayez structure du pichet et les socle électrique jusqu’à ce l’eau savonneuse. pas de manipuler l’appareil rainures de vissage pour qu’il soit propre. tant que toutes les pièces n’ont toute fissure, craquelure ou pas cessé de tourner ! Ceci est • Pour nettoyer les résidus de cassure. S’il est endommagé, Comment le ranger : valable lors de l’assemblage, du débordements collés sur le remplacez-le immédiatement Rangez le pichet du mélangeur désassemblage, lors du change- socle électrique, essuyez-les pour éviter d’éventuelles NutriBullet® Blender verticalement ment d’accessoires, du nettoy- avec une éponge humide et blessures corporelles. muni de son couvercle sécurisé age, et chaque fois que vous de l’eau chaude. • NE JAMAIS UTILISER UN par-dessus. Ne placez aucun devez laisser l’appareil • Vous pouvez utiliser si PICHET QUI N’EST PAS objet sur le couvercle du pichet. sans surveillance. nécessaire, une petite brosse CORRECTEMENT ALIGNÉ Rangez les accessoires restants ÉTAPE 2 : pour nettoyer la zone du AVEC LA LAME. Dans ce cas, dans un endroit sûr où ils ne système d’activation afin de le pichet et le socle électrique pourront pas être endommagés Détachez le pichet du vous assurer qu’elle est propre. pourraient se séparer, et où ils ne constitueront aucune socle électrique. exposant ainsi l’assemblage source de danger. AVERTISSEMENT : Ne jamais submerger le socle électrique de la lame, ce qui pourrait ÉTAPE 3 : dans l’eau. potentiellement provoquer de Nettoyer chaque partie graves blessures corporelles. constituante (socle électrique, LE PICHET NUTRIBULLET ® : Pièces de rechange. pichet) tel que recommandé LE POUSSOIR : AVERTISSEMENT : Les Pour commander des dans les pages suivantes. lames sont tranchantes! Faites • Le poussoir doit toujours être pièces et des accessoires preuve de prudence lors du lavé à la main avec de l’eau supplémentaires, veuillez SOCLE ÉLECTRIQUE : nettoyage du pichet. savonneuse. Les ingrédients visiter notre site web à • Pour éviter tout risque • Le pichet est lavable au restés collés pourraient nutribullet.com/shop/ de blessure, NE JAMAIS lave-vaisselle. Nous vous nécessiter un brossage plus accessories ou n’hésitez pas essayer de nettoyer le recommandons de le rincer et poussé avec une brosse à à contacter le service clientèle de le brosser rapidement avec vaisselle ou une éponge. au 1.800.523.5993. 44 45
You can also read