CALL FOR PAPERS 2021 China - cti symposium world series
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
CALL FOR PAPERS 2021
China
Information Classification: General
CTI SYMPOSIUM CHINA will take place again!
We are pleased to inform you that the CTI SYMPOSIUM CHINA 2021 will be held as a face-to-face event in Shanghai
from September 27-29. From 2021 on the CTI SYMPOSIUM CHINA will be organized by Informa Markets based in Beijing.
Informa has co-organized the CTI symposium from the very beginning and build this event as a leading industry platform in China.
The team is very much looking forward to successful continuation of this leading business meeting and cooperation with its clients.
The CTI SYMPOSIUM CHINA continues to be under the technical direction of Prof. Dr.-Ing. Ferit Kücükay.
To start off the preparations for the 2021 edition we are now inviting experts to submit their paper proposals!
Prof. Dr Ferit Kücükay
Chairman CTI SYMPOSIUM CHINA
Director of the Institute of Automotive Engineering
Technische Universität Braunschweig
Information Classification: General
CTI SYMPOSIA – THE EXPERT SUMMIT
THAT DRIVES MOBILITY
CTI SYMPOSIUM – THE MEETING PLACE YOU CANNOT MISS
• Keynote speeches, panel discussions, technical presentations
• Accompanying CTI SYMPOSIUM EXPO (more on page 9)
• Exchange of experiences, R&D results and opinions
• Leading representatives and decision makers of automobile manufacturers, suppliers, engineering consultants, officials
• Live discussion of the latest technologies and strategies for passenger cars and commercial vehicles
• Extensive networking during coffee and lunch breaks as well as at our evening event
• Conference documentations
EVENT DATES
27 September 2021: Digital Workshop Online
28-29 September 2021: Main Days + Expo Shanghai Marriott Hotel Parkview
Information Classification: GeneralIMPORTANT NOTE ON THE PREPARATION OF
THE EVENT AND YOUR PRESENTATION
The decision on whether to hold the symposium on-site or online will be based on the development of the Covid-19
situation as well as the foreseeable general conditions in 2021.
As information about the expected general conditions in the second half of 2021 is not yet predictable, we ask the authors
to wait with possible travel bookings until a decision is made, since the organizer will not be responsible for any
cancellation fees etc.
If your lecture is for the Digital Workshop on 27th September, please be prepared that in case of a digital execution we will
request a pre-recorded video of the lecture in addition to the lecture material. You will of course receive the corresponding
information.
Your contact for more information
Ella Qin
+86 10 6562 3315
ella.qin@informa.com
Information Classification: GeneralTOPIC AREAS FOR YOUR PAPER PROPOSAL
MARKETS, REQUIREMENTS, STRATEGIES LAUNCH DEVICES AND TRANSMISSION SHIFTING
• Automotive market development • Clutch technology
• Strategies and Scenarios • Torque converter
• Market specific regulations and customer requirements • Geared neutral
• Sales and purchasing potential • Actuator technology
• Ecological and legal constraints • Vibration damping
• Consumer research • Interior and exterior shiftings
• Energy saving and new vehicle programmes • Shift concepts
• Regulatory impacts • Shift comfort
• Carbon footprint and life-cycle assessment • Friction materials and parameters
TRANSMISSIONS (TM), POWERTRAINS FOR ICV AND HEV COMPONENTS IN TRANSMISSIONS AND DRIVETRAINS:
FROM LOW VOLTAGE TO HIGH VOLTAGE MECHANIC, HYDRAULIC AND ELECTRIC
• Manual TM • Automated manual TM • Gearset, shafts and housing
• Dual-clutch TM • Automatic TM • Sealings and bearings
• Continuously variable TM • Dedicated hybrid TM • Electromechanical actuation
• Hybridised TM • Electrified TM • Hydraulics
• Innovative TM architectures • Component efficiency
• Plug-in hybrids • Micro, mild, full hybrids • Light weight measures
• 48V: technologies & impact on transmission • Reduction of parasitic losses
• Operation strategies, launch characteristics • Electric machine (EM) from low to high speed
• Energy recovery, torque vectoring • Power electronics (PE)
• Energy and thermal management • Bordnet
Information Classification: GeneralAWD-SYSTEMS, EAWD, LOCKS E-AXLES, BEV DRIVETRAINS, FROM LOW VOLTAGE (48V)
• Challenges, concepts TO HIGH VOLTAGE
• Developments to master the current challenges • E-axles: w/wo e-park lock
• Opportunities for fuel efficiency improvements with integrated controller
• Transmissions and locks for all-wheel drives for AWD
• Torque vectoring, locking differentials • E-drives: Single-speed & multi-speed, CVT
• Transfer units and axle drives E-drives w. high-speed e-motors, TM & components
• Driving dynamics, driving safety Coaxial planetary e-drives
• Control and management Layshaft gear e-drives
DEVELOPMENTS AND CONCEPTS IN THE FIELD OF • 400V/800 V
• Fuel cell drives
• Powertrain integration • Range extenders/range extended drivetrains
• Function integration • Energy management and thermal management
• Comfort, driving enjoyment and safety • 48V BEV concepts
• Fuel/energy consumption
• Downsizing and downspeeding of combustion engines
TRANSMISSIONS, ELECTRIFIED POWER- AND DRIVETRAINS BATTERIES, ENERGY STORAGE DEVICES, INFRASTRUCTURE
FOR COMMERCIAL VEHICLES • Batteries, ultra-caps, fuel cells
• Innovative transmission concepts • Charging stations
• System efficiency for MT, AMT, DCT, AT and CVT • Hydrogen supply
• Fuel consumption reduction by electric, pneumatic and • Inductive charging
hydraulic hybrid technologies • Fast charging
• Fuel efficiency i.v.o. architecture options, duty cycles • Standardisation
• Axle drives and differential transmissions
• Relevant, realistic driving cycles
• Power split transmissions (PST)
Information Classification: GeneralELECTRONICS IN TRANSMISSIONS, POWER- AND TEST, SIMULATION AND EVALUATION METHODS FOR
DRIVETRAINS POWER-AND DRIVETRAINS, TRANSMISSIONS
• Transmission electronics, control and regulation • Functional integration
• Sensor and actuator technology • Control concepts
• TCU software development • Development methods and tools
• Calibration • Drive system, transmission synthesis
• Power- and drivetrain integration: • Virtual drive system and TM development and testing
efficient cooperation of engine and transmission • Transmission and component tests
• Test facilities and standards
NVH AND ACOUSTICS IN POWER- AND DRIVETRAINS • Thermal management: efficiency optimisation
• Noise reduction and anti-vibration: in power- and • Friction reduction in power- and drivetrains
drivetrains • Comfort and ergonomics (shifting)
• Sound design • Test-rigs, representative requirements and set-up
• Active noise cancellation
• Impact of downsizing and downspeeding
FUNCTIONAL SAFETY, SECURITY
DIAGNOSTICS OF POWER- AND DRIVETRAINS,
TRANSMISSIONS • ASIC, ISO standards
• Relevance and impact on TM, PT and DT development
• Challenges of diagnostics for electrified TM and drives • Management of quality and functional safety
• Software based failure mgm. of electronic systems • From concept of functional safety to technical safety
• Methodology and tools for the diagnostic design requirements
• Challenges, practice, experiences of OBD • Impact of alternative drive concepts on functional safety
• Robustness of OBD and drivability
• Validation of diagnostic tools - ISO & SAE standards • Practical examples
• OBD and OTX standardisation
• Tele and remote diagnosis
• Predictive diagnostics, predictive maintainance
Information Classification: GeneralLUBRICATION, GREASES, THERMAL MANAGEMENT AUTOMATED DRIVING:
SOLUTIONS FOR E-DRIVES CONSEQUENCES FOR POWER- AND DRIVETRAINS
• Fluids for MT, AT, CVT, DCT, DHT, axles and differentials • Comfort and safety requirements for the power- and
• Hardware protection and fuel economy drivetrain of an automated vehicle
• Low viscosity transmission fluids • Power- and drivetrain integration in automated
• Additive concepts driving vehicles
• Base oils/base oil concepts • Weight reduction through automated driving due to
• Multivehicle transmission fluids changed load collectives
• Future industry standards for transmission fluids
• Filter systems
• Tribology, friction materials and parameters
• Wear CONNECTIVITY AND AI APPLICATIONS
• eFuels • Digital based calibration methods
• Online lifetime calculation and failure prediction
• Operating strategy of hybrid vehicles
INNOVATIVE MANUFACTURING AND • AI- and big-data-based predictive operation strategies and
GLOBAL PRODUCTION CHALLENGES calibration
• Manufacturing strategies & optimal production planning • Enhanced flexible and scalable software architecture
• Worldwide production concepts • Object oriented calibration methods
• Current challenges in global production strategies • Super vehicle-computer
• Application of additive manufcturing in serial production
• Use of data sciences in quality & production
• Light weight design in transmission and drivetrains
Information Classification: GeneralHOW TO HAND IN DEADLINE
EXTENDED:
YOUR PRESENTATION PROPOSAL 15 MAY 2021
WHO SHOULD TAKE AN ACTIVE PART? EVALUATION AND FEEDBACK ON SUBMISSIONS
Experts of all development areas in the field of automotive All presentation proposals will be forwarded to the programme
transmissions, alternative drives and components are invited committee. Acceptance for the programme will be based on
to hand in paper proposals. their evaluation. Authors will be informed during June 2021 .
SUBMISSION PRESENTATION DURATION, REQUIRED DOCUMENTS FOR THE
Submission via the call for papers form available at CTI SYMPOSIUM (MANDATORY)
www.informaexhibitions.cn/eshot/uploadfiles/CTI China 2021- • A presentation takes 17 - 20 minutes plus approx. 5 - 10
Submission Form.docx minutes of discussion with the audience afterwards
• Job history, digital portrait photo (colour, high resolution)
Due to the variety of topics, there will be parallel series of • Presentation slides (max. 20 slides)
presentations according to focuses. You are thus welcome to • Fully formulated written article (min. 8 pages)
hand in several topic proposals. • Details, slide and CV master will be provided
• All material is required both in English and Chinese
YOUR PROPOSAL SHOULD INCLUDE THE FOLLOWING INFORMATION • Pre-recorded video (Digital Workshop)
• Abstract (max. 1 page)
• Title of the presentation + 3 subtitles about CONFERENCE FEES FOR PRESENTERS
• Relation to one of the main focuses • The participation for the presenter (1 person) to the
• Complete contact details of authors and presenters: conference main days is free.
Name & surname, academic degree,
job title, department, postal address, phone, e-mail
Information Classification: GeneralCTI SYMPOSIUM EXPO
The CTI SYMPOSIUM EXPO is going to highlight the latest products, content and equipment that are relevant to the industry.
CTI SYMPOSIUM EXPO is your first choice when it comes to connecting with prospective customers, partners and existing clients.
• Multiple Sponsorship and exhibiting options for your products and company
• Networking opportunities with for targeted contacts
Your contact for more information
Echo Cao
+86 10 6562 3325
echo.cao@informa.com
Information Classification: GeneralYou can also read
