GET INDUSTRY READY WITH OUR TRAINING - JANUARY - JUNE 2021 CALENDAR - Master Builders South Australia
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
GET INDUSTRY READY WITH OUR TRAINING JANUARY - JUNE 2021 CALENDAR
GET INDUSTRY READY WITH MASTER BUILDERS SA TRAINING
WELCOME TO 2021
Following an uncertain year, we are looking Master Builders SA is continually looking at
forward to the journey of 2021; with our main ways to improve the delivery of training. During
priority being to continue to support our 2020 Master Builders SA introduced additional
members whilst they navigate through the delivery modes to continue to provide training
recovery and impact of COVID-19. during government forced restrictions during
the COVID-19 pandemic. I am pleased to say
As South Australia’s leading building and
during implementation our student satisfaction of
construction association, Master Builders SA are
90% was maintained, leading to the permanent
dedicated in delivering the latest training to
introduction of additional delivery modes
support both the residential and commercial
providing students with options and flexibility of
sectors.
learning.
This calendar showcases how we anticipate to
Selected courses in 2021 will be offered across a
keep you up to date with current and relevant
range of delivery modes including face to face,
industry specific training for January – June 2021.
webinar and virtual classroom.
We look forward to supporting your career,
personal and business growth in 2021 through
quality training.
FACE TO FACE WEBINAR VIRTUAL
Training will be Training can be taught Training sessions are
delivered at in the comfort of your pre-recorded and
Master Builders own home or office at can be completed
SA in a classroom the same time the face at the students own
environment. to face classroom is pace, adhering to
being taught. the requirements of
assessment deadlines.
2 | Master Builders SA Industry Ready Training
CONTENTS
LICENSING & TICKETS
Contractors Licensing Course 6
Elevated Work Platforms (Yellow Card) 8
White Card 10
Estimating and Planning Construction 11
Contracts and Legal Obligations 12
BUILDING AND TECHNICAL
BIM: The Basics 16
Building Codes & Standards - Residential 17
Building Codes & Standards - Commercial 18
Building Inspection & Report Writing 20
Construction of Buildings 21
Cladding: Conformance and Performance 22
Fundamentals of Building with Light Gauge Steel 24
Roof Trusses 25
Timber Framing Code 26
Understanding Lightweight Construction 28
Understanding Licensing and Approvals 29
Wet Area Waterproofing 30
PEOPLE & SAFETY
Asbestos Awareness 34
Bullying & Harassment 35
Chain of Responsibility (COR)& Load Restraint 36
Drugs & Alcohol Awareness & Reasonable Suspicion 37
First Aid Training 38
Health & Safety Representative Training 39
ISO Integrated Quality Management Systems 41
Site Safety and WHS Management 43
Safe Work Method Statements 44
Silica Awareness 45
Union Right of Entry 46
Master Builders SA Industry Ready Training | 3
LICENSING & TICKETS ENROL AT MBASA.COM.AU
Licensing Tips & Traps Unless you are an employee you can only do building work for others if you have a current and valid building work contractor’s licence that entitles you to do that work. This is true even if: • You have a supervisor’s licence. • You aren’t actually “on the tools” but are still causing or organising the performance of building work. • You’re a subcontractor rather than an employee. If you do business through a company then your company will need a contractor’s li- cence too. If you don’t have your licence in order you may be breaching the Building Work Contractors Act. This can potentially: • Lead to an investigation by Consumer and Business Services and end in a prosecution under the Act. A first offence can incur a maximum penalty of $50,000 for individuals and $250,000 for companies. • Make it harder to get paid for your work – you may need to go to Court. Consumer and Business Services have highlighted their intention to focus on appropriate licensing over the next 12 months, so we urge to ensure that you are appropriately licensed for the work you are undertaking to avoid any penalties. Master Builders SA membership team are here to help and we can assist you in applying for your licence, giving guidance on the appropriate training courses to complete and compiling the information you need to provide to Consumer & Business Services. Please give the team a call on 8211 7466 or email membership@mbasa.com.au.
CONTRACTORS LICENSING COURSE
This course is designed for those who are preparing to ADDITIONAL INFORMATION
apply for their Building Work Contractor’s Licence. Participants who attend this course will be issued with a
Recognised by Consumer & Business Services, this Certificate of Completion.
course satisfies the training requirement of the Building This course has been approved as meeting the
Work Contractor’s Licence. It is an intensive four day qualification and experience requirements of section
course taught over two weekends which will allow you 9(1)(a)(ii) and section 9(2)(c) of the Building Work
to apply for your licence as soon as possible. Contractors Act 1995 (the Act). The course will also be
TOPICS COVERED accepted for the business qualification requirements
for plumbing, gas fitting and electrical contractors’
Legal Requirements and the Building and Construction licences. As approved under the Government of
Industry South Australia, Consumer & Business Services.
This unit will provide you with a broad overview of
legal and administrative requirements affecting the PREREQUISITES
operation of a small business in the building industry. You must have sufficient skills in reading and writing
Industrial law, taxation law and insurance are all English to successfully complete this course. Translators
covered in this comprehensive course. will not be allowed to attend the course. You must
successfully pass a language, literacy and numeracy
Managing Small Business Finance in the Building and test prior to your enrolment being confirmed.
Construction Industry
Participants in this course must meet the Building and
This unit is designed to give you the necessary skills to Construction Industry Language Literacy Numeracy
project profits and develop your own financial plan (LLN) expectations to be able to commence.
for your business. Covering the three main aspects of
financial planning – planning for profit, planning the
financial structure of your business and planning for
cash flow.
LOCATION DURATION
Master Builders SA 4 full days
Level 1, 47 South Terrace, Adelaide
COST (INC. GST) DATE & TIME
$200.00 Master Builders Member/CITB eligible 9.30am - 4.00pm (2 consecutive weekends)
$720.00 Master Builders Member • 13, 14 & 20, 21 February (Saturday, Sunday)
$760.00 Non Member/CITB eligible • 20, 21 & 27, 28 March (Saturday, Sunday)
$1,040.00 Non Member • 10, 11 & 17, 18 April (Saturday, Sunday)
• 1, 2 & 8, 9 May (Saturday, Sunday)
• 29, 30 & 5, 6 June (Saturday, Sunday)
CPD POINTS 26
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
6 | Master Builders SA Industry Ready TrainingWE ARE HERE TO
HELP YOU GET
YOUR
RESIDENTIAL
BUILDERS
LICENCE
CONTACT US ON
08 8211 7466 I membership@mbasa.com.au
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
Master Builders SA Industry Ready Training | 7ELEVATED WORK PLATFORMS (YELLOW CARD)
The EWPA ‘Yellow Card’ is a nationally recognised UNITS OF COMPETENCY
industry training program mapped to the unit of
competency RIIHAN301D. • RIIHAN301D - Operate elevated work platform
Operate elevating work platform, developed by the PREREQUISITES
EWPA in consultation with members and industry.
Participants must be at least 17 years of age AND
The intention of this course is to assist operators,
wear appropriate Personal Protective Equipment
employers, equipment owners and manufacturers to
(PPE) The PPE you must wear includes: Safety boots
comply with the WHS regulation.
(steel cap); Safety glasses (non-tinted); Long pants;
The ‘Yellow Card’ provides evidence that the Long-sleeved shirt (for WHS reasons please do not
operators of specific types of EWPs have been trained wear excessively loose clothing); High visibility vest;
in the safe use of that type of work platform. The and Sun protection as required.
training meets and exceeds the unit of competency
RIIHAN301D Operate elevating work platform. ADDITIONAL INFORMATION
This training program is designed for people who wish Participants who successfully complete the course
to or are required to develop the skills and knowledge will be issued with a Yellow Card and a Statement of
needed to operate elevated work platforms. Completion.
Participants may complete singular or multiple Yellow Card ticket and Statement of Attainment will
machine classes according to the type of work they not be issued on the day of training. It will be posted
will be undertaking. Machine classes available to to students once assessments have been marked by
Master Builders are: Scissor Lift (SL) and Self Propelled the trainer.
Boom (BL). The course content includes:
• Plan and prepare for operating an elevating work
platform
• Conduct work activities from elevating work
platform
• Carry out operator maintenance
• Clean up
LOCATION DURATION
Carey Training Pty Ltd: 228-230 Grange Road, 8.5 hours
Flinders Park SA 5025
COST (INC. GST) DATE & TIME
$60.00 Master Builders Member/CITB eligible 8.00am - 4.30pm
$300.00 Master Builders Member/CITB eligible • 16 February (Tuesday)
$120.00 Non Member/CITB eligible • 10 May (Monday)
$340.00 Non Member/CITB Non eligible
CPD POINTS 8.5
RTO CODE 140100
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
8 | Master Builders SA Industry Ready TrainingWHITE CARD
Master Builders SA is able to assist participants in Upon attending the course, you must provide
obtaining a White Card via a Registered Training Government issued photo ID (driver’s licence,
Organisation. passport, proof of age). If you feel you do not hold
sufficient ID, please contact the Training Department
The course covers the requirements of current
prior to attending.
National and State legislation for induction into the
building and construction industry. This is a mandatory ADDITIONAL INFORMATION
requirement for all persons working on a building
or construction site. The White Card is a nationally Participants who successfully complete the course
accepted card which will allow you to work on any will be issued with a White Card and a Statement of
building and construction site in Australia. Attainment.
White Card ticket and Statement of Attainment will
UNITS OF COMPETENCY not be issued on the day of training. It will be posted
• CPCCWHS1001 Prepare to work safely in the to students once assessments have been marked by
construction industry the trainer.
PRE-ENROLMENT INFORMATION
You must have sufficient skills in reading and writing
English to successfully complete this course. Translators
will not be allowed to attend the course. If you require
support with literacy or language, please let us know
prior to commencing the course. Refunds will not be
provided to those who are assessed by the trainer as
not meeting the required language and literacy skills.
You will also need to provide a valid Unique Student
Identifier (USI). Please visit www.usi.gov.au for more
information.
LOCATION DURATION
Master Builders SA 6.5 hours
Level 1, 47 South Terrace, Adelaide
DATE & TIME
8.30am to 3.00pm
COST (INC. GST) • 27 January (Wednesday)
• 17 February (Wednesday)
$120.00 Master Builders Member
• 10 March (Wednesday)
$140.00 Non Member
• 31 March (Wednesday)
CPD POINTS 6.5 • 21 April (Wednesday)
• 12 May (Wednesday)
• 2 June (Wednesday)
• 23 June (Wednesday)
RTO CODE 140100
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
10 | Master Builders SA Industry Ready TrainingESTIMATING AND PLANNING CONSTRUCTION
Estimating and Planning is recognised by Consumer & PREREQUISITES
Business Services as a course that satisfies the training
requirements of the Building Work Contractor’s You are required to have sufficient skills in reading
Licence when applying for any building work, and writing along with relevant construction industry
additions, alternations, residential building work and experience to successfully complete this course.
transportable building construction. It is an intensive You will also need to provide a valid Unique Student
course that will allow you to earn your qualification as Identifier (USI). Please visit www.usi.gov.au for more
quickly as possible. information.
• CPCCBC4007 Plan building and construction work
• CPCCBC4004A Identify and produce estimated
ADDITIONAL INFORMATION
costs for building and construction projects Participants who successfully complete all of the
required assessment activities will be issued with a
Statement of Attainment.
TOPICS COVERED INCLUDE
• Appraise contract documentation to identify
operational requirements.
• Implement strategies for construction operations
• Prepare project schedule
• Determine required resources
• Prepare and submit condition reports
• Read and interpret plans and specifications
• Identify and calculate labour costs
• Identify and establish physical resource
requirements
• Develop estimated project costs
• Responsibilities – client, supply chain, design team
• Pre-qualification and supply chain capability
• Drivers for successful adoption of BIM
• There are no prerequisites for this course.
LOCATION DURATION
Master Builders SA 15 hours
Level 1, 47 South Terrace, Adelaide
DATE & TIME
5.30pm to 8.30pm
COST (INC. GST)
• 4, 11, 18 & 25 February, 4 March (Thursday)
$330.00 Master Builders Member/CITB eligible
• 22 & 29 April, 6, 13 & 20 May (Thursday)
$825.00 Master Builders Member/Non CITB eligible
$480.00 Non Member/CITB eligible
$975.00 Non Member/CITB Non eligible
CPD POINTS 15
RTO CODE 40222
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
Master Builders SA Industry Ready Training | 11CONTRACTS AND LEGAL OBLIGATIONS
Contracts & Legal Obligations is recognised by PREREQUISITES
Consumer & Business Services as a course that
satisfies the training requirements of the Building Work You are required to have sufficient skills in reading
Contractor’s Licence when applying for any building and writing along with relevant construction industry
work, additions, alternations, residential building experience to successfully complete this course.
work and transportable building construction. It is You will also need to provide a valid Unique Student
an intensive course that will allow you to earn your Identifier (USI). Please visit www.usi.gov.au for more
qualification as quickly as possible. information.
• CPCCBC4003A Select and prepare a construction
contract ADDITIONAL INFORMATION
• CPCCBC4024A Resolve business dispute Participants who successfully complete all of the
required assessment activities will be issued with a
TOPICS COVERED INCLUDE Statement of Attainment.
• Identify and analyse the essential elements, sections
and clauses of a business contract
• Select an appropriate contract for the works to be
undertaken
• Prepare the contract
• Develop and implement dispute resolution
procedures
• Conduct an initial investigation into business
disputes and possible resolution strategies
• Identify opportunities for dispute resolution
LOCATION DURATION
Master Builders SA 15 hours
Level 1, 47 South Terrace, Adelaide
DATE & TIME
5.30pm to 8.30pm
COST (INC. GST)
• 20 & 27 April, 11,18 & 25 May (Tuesday)
$210.00 Master Builders Member/CITB eligible
$600.00 Master Builders Member/Non CITB eligible
$700.00 Non Member/CITB eligible
$810.00 Non Member/CITB Non eligible
CPD POINTS 15
RTO CODE 40222
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
12 | Master Builders SA Industry Ready TrainingDO YOUR SKILLS MEASURE UP? SIGN UP TO ACCESS $3000 OF FUNDING FOR YOUR CONSTRUCTION TRAINING. citb.org.au/findacourse THE FUTURE IS YOURS TO BUILD.
BUILDING & TECHNICAL ENROL AT MBASA.COM.AU
BLUESCOPE REDEFINES INNER STRENGTH WITH TRUECORE® STEEL. House frames made from TRUECORE® steel are precision engineered with a high strength-to-weight ratio, making them not only light and easy to work with on site, but also suitable for managing the wide spans of contemporary, open plan house designs. They won’t shrink, twist or warp over time, or attract termites. And their popularity is set to grow, as brand ambassador, Tom Williams, brings to life the benefits of building with TRUECORE® steel to homeowners all around Australia. To find out more about building with the inner strength of TRUECORE® steel, visit TRUECORE.COM.AU or call 1800 738 576. TRUECORE®, BlueScope and the BlueScope brand mark are registered trade marks of BlueScope Steel Limited. © BlueScope Steel Limited ABN 16 000 011 058. All rights reserved.
BIM: THE BASICS
This course aims to teach participants the importance ADDITIONAL INFORMATION
of BIM in relation to the Construction Industry. The key
learning objectives for the course is to understand Participants who attend this course will be issued with
the importance of BIM processes, client requirements, a Certificate of Attendance.
technology and the whole lifecycle approach.
TOPICS COVERED INCLUDE
• Why do we need to adopt BIM?
• Benefits & challenges of BIM
• BIM dimensions
• BIM and the importance of collaborate Working
• BIM in Australia – Federal vs. Local Government
• Responsibilities – client, supply chain, design team
• Pre-qualification and supply chain capability
• Drivers for successful adoption of BIM
• There are no prerequisites for this course.
COST (INC. GST) DURATION
$250.00 Master Builders Member 8 hours
$500.00 Non Member
CPD POINTS 8 DATE & TIME
9.00am to 4.00pm
• 2 March (Tuesday)
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
16 | Master Builders SA Industry Ready TrainingBUILDING CODES & STANDARDS - RESIDENTIAL
If you want to obtain a Building Work Supervisor’s ADDITIONAL INFORMATION
Licence as a general builder for residential Participants who successfully complete all required
construction work for Class 1 buildings, this course is an assessment activities will be issued with a Certificate of
ideal starting point. Completion.
TOPICS COVERED INCLUDE
• Accessing and interpreting the National
Construction Code and relevant Australian
standards
• Analysing and applying a range of solutions to
a construction problem for compliance with the
Building Code of Australia
• Applying fire protection requirements
PREREQUISITES
Participants must have relevant construction industry
experience.
LOCATION DURATION
Master Builders SA 6 hours
Level 1, 47 South Terrace, Adelaide
COST (INC. GST) DATE & TIME
$270.00 Master Builders Member/CITB eligible 5.30pm to 8.30pm (2 consecutive evenings)
$350.00 Master Builders Member • 8 & 9 February (Monday & Tuesday)
• 4 & 5 May (Tuesday & Wednesday)
$620.00 Non Member/CITB eligible
$700.00 Non Member
CPD POINTS 6
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
Master Builders SA Industry Ready Training | 17BUILDING CODES & STANDARDS - COMMERCIAL
If you want to obtain a Building Work Supervisor’s ADDITIONAL INFORMATION
Licence for the purpose of constructing commercial Participants who successfully complete all required
and industrial buildings, this course is an ideal starting assessment activities will be issued with a Certificate
point. We will expand your knowledge on the of Completion.
legislative requirements for Class 2 to 9 buildings.
TOPICS COVERED INCLUDE BESPOKE TRAINING is designed for an individual
• Accessing and interpreting the National and/or group specifically for the targeted
Construction Code and relevant Australian
audience and is offered on this course. Bespoke
standards
training is designed to accommodate 8+
• Analysing and applying a range of solutions to
construction problems students and can be delivered either onsite at
• Applying fire protection requirements Master Builders SA and/or in the convenience
• Understand requirements for the installation of of your workplace where the required facilities
Essential Safety Provisions can be provided. To discuss your bespoke
training requirements and to obtain a quote
PREREQUISITES
please contact the training department on
Participants must have relevant construction industry
8211 7466 or training@mbasa.com.au
experience.
LOCATION DURATION
Master Builders SA 6 hours
Level 1, 47 South Terrace, Adelaide
COST (INC. GST) DATE & TIME
$350.00 Master Builders Member 9.30am to 4.30pm
$620.00 Non Member • 23 March (Tuesday)
• 23 June (Wednesday)
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
18 | Master Builders SA Industry Ready TrainingCreating jobs and supporting
the industry
Through Cbus Property*, we have contributed to the built environment.
investing over $2.5 billion into local property and developments
created over 95,000 direct jobs^.
Contact Martha for your business super needs
Martha Coro – Business Development Manager, SA
0429 166 785 martha.coro@cbussuper.com.au cbussuper.com.au
*Cbus Property Pty Ltd is a wholly-owned subsidiary of Cbus and has responsibility for the strategic performance and
management of Cbus’ direct property developments and investments.
^Estimated jobs since 2006 to June 2019 based on inductions for completed and committed developments.
You should read the Employer Handbook, Cbus Industry Superannuation Product Disclosure Statement (PDS) and other relevant
documentation to decide whether Cbus is right for you. Call 1300 361 784 or visit www.cbussuper.com.au
Cbus’ Trustee: United Super Pty Ltd ABN 46 006 261 623 AFSL 233792 Cbus ABN 75 493 363 262.BUILDING INSPECTION & REPORT WRITING
This course gives participants the background PREREQUISITES
knowledge and practical approach to carrying out
pre-purchase and defect inspections and the related Participants are required to hold an AQF level 3
completion of comprehensive inspection reports or above qualification in a related building and
to the required Australian Standard. This course is a construction area.
way to capitalise on your building and construction Have access to the National Construction Code -
knowledge and experience and provide additional Class 1 + Class 10 and hold sufficient skills in reading +
income in a new field of work. writing.
Participants are advised that proposals for industry
licensing are likely to require appropriate industry
ADDITIONAL INFORMATION
experience and indemnity insurance requirements. Participants who successfully complete all required
assessment activities will be issued with a Certificate
TOPICS COVERED INCLUDE of Completion.
• Different inspection types This course is purely informative and does not result in
• Processes and tools used during the inspection the issuance of a ticket or licence.
• Carrying out an on-site inspection
• Common building faults
• Duties of an inspector within the relevant
legislation
• Working to an Australian Standard
• Planning and preparing the final reports
• Appropriate wording of findings for inclusion in the
final inspection report
LOCATION DURATION
Master Builders SA 2 full days
Level 1, 47 South Terrace, Adelaide
COST (INC. GST) DATE & TIME
$645.00 Master Builders Member/CITB eligible 9.30am to 4.30pm
$775.00 Master Builders Member • 15 &16 March (Monday & Tuesday)
$1,270.00 Non Member/CITB eligible • 9 & 10 June (Wednesday & Thursday)
$1,400.00 Non Member
CPD POINTS 14
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
20 | Master Builders SA Industry Ready TrainingCONTRUCTION OF BUILDINGS
This course covers common building techniques and ADDITIONAL INFORMATION
structural engineering practices used in the erection Participants who successfully complete all required
or demolition of low-rise residential structures and assessment activities will be issued with a Certificate of
includes content on footings, framing and cladding. Completion.
TOPICS COVERED INCLUDE CONSTRUCTION OF BUILDINGS
• Identifying types of drawings and their purpose
• Commonly-used symbols and abbreviations
• Locating and identifying key features on a site
plan and drawing
• Identifying non-structural aspects of the
specifications
PREREQUISITES
Participants must have relevant construction industry
experience to successfully complete this course.
LOCATION DURATION
Master Builders SA 12 hours
Level 1, 47 South Terrace, Adelaide
Face to face
COST (INC. GST) DATE & TIME
$190.00 Master Builders Member/CITB eligible 5.30pm to 8.30pm
$350.00 Master Builders Member • 4, 11, 18 & 25 March (Thursday)
$540.00 Non Member/CITB eligible
$700.00 Non Member
CPD POINTS 12
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
Master Builders SA Industry Ready Training | 21CLADDING: CONFORMANCE AND PERFORMANCE
This seminar will address the use of inappropriate ADDITIONAL INFORMATION
external cladding materials which have been
installed on a number of high-rise buildings that have Participants who attend this course will be issued with
been identified as a major contributing factor to a Certificate of Attendance
substantial fires which have occurred in Australia, the
United Kingdom, China and the Gulf region.
These fires have resulted in the overwhelming need
for amendments to Volume One of the 2016 edition
of the National Construction Code covering the
background and providing an overview of this
amendment.
We will also present the diverse means of facilitating
the use of appropriate cladding materials as well
as provide a sneak preview of a new unique online
tool which will assist architects and designers shortlist
suitable claddings in accordance with NCC section
C. The seminar will also clarify the distinction between
products affected by the amendment to Volume
One and other cladding products.
COST (INC. GST) DURATION
2 hours
$25.00 Master Builders Member
$50.00 Non Member
DATE & TIME
5.30pm to 7.00pm
• 8 April (Thursday)
CPD POINTS 2
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
22 | Master Builders SA Industry Ready TrainingPutting the Freeze
on the ICE Epidemic
STAH Education Outcomes
STAH Education’s comprehensive risk-based training packages support all stakeholders from drugs
and alcohol. We provide education to prevent the Australian Drug epidemic from undermining safety,
production, profits, morale, workplace culture and sustainability.
Clarify Rights, Roles, Responsibilities and Protect your corporate image
Repercussions
Reduce HR Headaches
Stop Drugs and Alcohol undermining
Protect profits and productivity
your business
Reduce Industrial Relations issues
Fulfill your Duty Of Care obligations and
avert risk to non-compliance Promote a safe work environment
Avoid litigation Strengthen workplace culture
DAMP Design Unit 1 Unit 2
Design a Drug and Alcohol Drug and Alcohol Awareness Implementing Reasonable
Management Plan (DAMP) For A Safe Work Environment Suspicion / For Cause Testing
Ensures your organisation has Ensures all on site know what Enable your management
a fair and justified process is expected and are fully teams to monitor the
to handle the intricate steps aware of their obligations. workplace and initiate testing.
needed to counteract the To complete this course is Tackle noncompliance
Australian Drug culture to sign a risk assessment professionally and
destroying your business knowing your Duty Of Care. systematically.
Expert industry experience, No more excuses! Protocols and procedures
tailors a DAMP to suit your protect your business from
business and meet Work, the Drug epidemic.
Health & Safety obligations.
Meet Duty Of Care obligations
and reinforce your business
risk profile.
Support - The STAH Program, Tackling Mental Health and Substance Abuse
Testing - Screening On Site, Your drug and alcohol testing provider
Awareness - STAH Education, Comprehensive Drug and Alcohol Awareness training
Help - Access to support services via our website
For more information contact us on 0422 210 726 | stahgroup.com.auFUNDAMENTALS OF BUILDING WITH LIGHT GAUGE STEEL
Are you a carpenter looking for a change or looking ADDITIONAL INFORMATION
to expand your business to offer another service? Participants who attend this course will be issued with
Our Fundamentals of Building with Light Gauge Steel a Certificate of Attendance.
(LGS) course is aimed to help residential builders, site
supervisors and carpenters to gain an understanding
of what is required when building with LGS specifically
around compliance.
TOPICS COVERED INCLUDE
• Fundamentals of working with LGS framing
• Understanding LGS site lay plans – connections;
fastenings and terminology
• Implications, considerations, preparation and
management of Follow-On Trades
• Key differences in the Build-up process
• Compliance
LOCATION DURATION
Master Builders SA 3 hours
Level 1, 47 South Terrace, Adelaide
COST (INC. GST) DATE & TIME
$100.00 Master Builders Member/CITB eligible 5.30pm to 8.30pm
$160.00 Master Builders Member • 13 April (Tuesday)
$120.00 Non Member/CITB eligible
$180.00 Non Member
CPD POINTS 3
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
24 | Master Builders SA Industry Ready TrainingROOF TRUSSES
Building Work Supervisors are required to undertake ADDITIONAL INFORMATION
this course as a result of the Minister’s Truss Taskforce Participants who attend this course will be issued with
and the Development (Trusses) Variation Regulations
a Certificate of Completion.
2010 under the Development Act.
The course includes information on the Development
Act powers of entry, expiation notice process and
mandated approval and inspection requirements.
It also covers all timber and steel truss installation
requirements, including wall and roof framing. You will
learn what can (and has) gone wrong with existing
installations and how to prevent such failures in the
future.
TOPICS COVERED INCLUDE
• Changes to the application, inspection and
certification process and use of advisory notes,
schedules and Regulation requirements
• Use of checklists for approvals and inspections
• Implementation of the Minister’s Taskforce
recommendations
• Framing Systems and other related standards
• Diagonal bracing, top and bottom chord bracing,
web ties, truss connections and girder brackets,
load and non-load bearing walls
• Batten Splicing at critical locations
LOCATION DURATION
Master Builders SA 6 hours
Level 1, 47 South Terrace, Adelaide
COST (INC. GST) DATE & TIME
$195.00 Master Builders Member/CITB eligible 9.00am to 4.00pm
$315.00 Master Builders Member • 28 April (Wednesday)
$285.00 Non Member/CITB eligible
$405.00 Non Member 5.30pm to 8.30pm
• 15 & 16 February (Monday & Tuesday)
CPD POINTS 6 • 1 & 2 June (Tuesday & Wednesday)
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
Master Builders SA Industry Ready Training | 25TIMBER FRAMING CODE This comprehensive course is valuable and ADDITIONAL INFORMATION considered favourable in licensing applications by Participants who successfully complete all required Consumer and Business Services. assessment activities will be issued with a Certificate of You will gain a thorough working knowledge of Completion. AS 1684.2 2010 Residential Timber Framing Code, ensuring the most appropriate timbers are selected and the right choice of members and construction techniques are made in the design and construction of a building. TOPICS COVERED INCLUDE • Species selection • Durability • Span tables • Wall framing • Roof framing • Bracing • Tie downs LOCATION DURATION Master Builders SA 24 hours Level 1, 47 South Terrace, Adelaide COST (INC. GST) DATE & TIME $405.00 Master Builders Member/CITB eligible 5.30pm to 8.30pm $895.00 Master Builders Member • 3 February to 24 March $1,100.00 Non Member/CITB eligible • 7 April to 26 May $1,600.00 Non Member CPD POINTS 24 While care has been taken to ensure that information contained is true and correct at the time of publication, changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020 26 | Master Builders SA Industry Ready Training
UNDERSTANDING LIGHTWEIGHT CONSTRUCTION This seminar will address 3 key issues affecting the ADDITIONAL INFORMATION Australian construction at the present time – shortage Participants who attend this course will be issued with of trades leading to increase in cost of labour, the a Certificate of Attendance. cost of waste and the shrinking lot size and the increased cost of building. TOPICS COVERED INCLUDE • How to achieve project efficiencies • Significantly reduce costs of building • How you can get to ‘lock up’ faster • Conforming to all relevant standards & codes • Reduce waste on-site LOCATION DURATION Master Builders SA 2 hours Level 1, 47 South Terrace, Adelaide COST (INC. GST) DATE & TIME $25.00 Master Builders Member 10.00am to 12.00pm $50.00 Non Member • 11 February (Tuesday) CPD POINTS 2 While care has been taken to ensure that information contained is true and correct at the time of publication, changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020 28 | Master Builders SA Industry Ready Training
UNDERSTANDING LICENSING AND APPROVALS
This course will examine the development approval PREREQUISITES
process and the documentation required to obtain Participants must have relevant construction industry
both planning and building consent. We will present experience to successfully complete this course.
on reading and interpreting building plans for new
constructions, and determine how compliance is
achieved in accordance with applicable legislation
ADDITIONAL INFORMATION
and licensing conditions. Participants who successfully complete all required
assessment activities will be issued with a Certificate of
TOPICS COVERED INCLUDE Completion.
• Overview of the development approval process
• Recognise working drawings and their purpose
• Identify Australian Standards nominated in
building specifications
• Apply licensing requirements for building sign-offs
LOCATION DURATION
Master Builders SA 6 hours
Level 1, 47 South Terrace, Adelaide
COST (INC. GST) DATE & TIME
$220.00 Master Builders Member/CITB eligible 5.30pm to 8.30pm (2 consecutive evenings)
$350.00 Master Builders Member • 2 & 3 June (Thursday)
$570.00 Non Member/CITB eligible • 27 & 28 January (Wednesday & Thursday)
$700.00 Non Member
CPD POINTS 6
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
Master Builders SA Industry Ready Training | 29WET AREA WATERPROOFING
An overwhelming majority of construction work ADDITIONAL INFORMATION
failures are linked to faulty waterproofing. This course Participants who attend this course will be issued with
focuses on the Building Code of Australia (BCA),
a Certificate of Attendance.
Australian Standard and Minister’s Specifications
relating to waterproofing of wet areas. This course is purely informative and does not result in
the issuance of a ticket or licence.
You will learn installation methods, treatment, product
application and best practice.
TOPICS COVERED INCLUDE
• Common failures and reasons
• Wet area requirements under the BCA
• AS3740 Waterproofing of wet areas within
residential buildings
• Minister’s Specifications
• Waterproofing membranes
• Component to component compatibilities
LOCATION DURATION
Master Builders SA 4 hours
Level 1, 47 South Terrace, Adelaide
COST (INC. GST) DATE & TIME
$120.00 Master Builders Member/CITB eligible 9.00am to 1:00pm
$180.00 Master Builders Member • 11 February (Thursday)
$240.00 Non Member/CITB eligible
$300.00 Non Member 4.30pm to 8.30pm
• 18 May (Tuesday)
CPD POINTS 4
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
30 | Master Builders SA Industry Ready TrainingMASTER BUILDERS SA APPRENTICES
Providing apprentices to the building and construction industry since 1993
We pride ourselves on
• Having the lowest charge out rates in the industry for our Members
• Flexible hosting arrangements with short term placements starting from one week
• Complying with all employment obligations including wages, superannuation and leave
entitlements
• Organising and monitoring all Trade School placements and its associated admin and
fees
• Having expertise to manage any WorkCover and Return to Work claims
• Field Coordinators providing ongoing support and mentoring to apprentices and host
employers
We employ apprentices in
• Carpentry/Joinery • Wall & Floor Tiling
• Plumbing • Painting & Decorating
• Roof Plumbing • Solid Plastering
• Electrical & HVAC • Concreting
• Bricklaying • Landscaping
• Wall & Ceiling Lining • Cabinet Making
Master Builders Association of SA
Group Training Scheme
p 08 8211 7466 e apprentices@mbasa.com.au
w mbasa.com.au/apprentices
a Level 1, 47 South Terrace, Adelaide SA 5000PEOPLE & SAFETY ENROL AT MBASA.COM.AU
Local service and support
Our dedicated and experienced state-based teams can help get
your super sorted so you can get on with running your business.
Contact Martha for your business super needs
Martha Coro – Business Development Manager, SA
0429 166 785 martha.coro@cbussuper.com.au cbussuper.com.au
You should read the Employer Handbook, Cbus Industry Superannuation Product Disclosure Statement (PDS) and other relevant
documentation to decide whether Cbus is right for you. Call 1300 361 784 or visit www.cbussuper.com.au
Cbus’ Trustee: United Super Pty Ltd ABN 46 006 261 623 AFSL 233792 Cbus ABN 75 493 363 262.ASBESTOS AWARENESS
Asbestos is a hazardous substance that has been ADDITIONAL INFORMATION
used in many building products in Australia. Exposure Participants who attend this course will be issued with
to asbestos has been associated with severe health
a Certificate of Attendance.
ailments affecting the lungs, abdomen and heart.
In recent years, victims have successfully sought This course is purely informative and does not result in
compensation for pain and suffering linked to the issuance of a ticket or licence.
prolonged asbestos exposure.
Unlicensed removal of limited amounts of asbestos
is permitted in certain circumstances only. This BESPOKE TRAINING is designed for an individual
course provides background information and covers and/or group specifically for the targeted
asbestos removal in the following situations:
audience and is offered on this course. Bespoke
• In premises that are not workplaces; training is designed to accommodate 8+
• Where the quantity of non-friable asbestos to be students and can be delivered either onsite at
removed is less than 10m²; and
• Where friable asbestos material is being removed Master Builders SA and/or in the convenience of
for repair or maintenance work (can only cover your workplace where the required facilities can
half a square metre (½ m²) or less in surface area) be provided. To discuss your bespoke training
Asbestos removal greater than these limits requires requirements and to obtain a quote please
the operator to be licenced and is outside the scope contact the training department on 8211 7466
of this course. or training@mbasa.com.au
TOPICS COVERED INCLUDE
• Asbestos use, production and surveillance in
Australia
• Selection and use of Personal Protective
Equipment (PPE)
• Drilling of asbestos-containing materials
• Working with asbestos cement roofs
LOCATION DURATION
Master Builders SA 3 hours
Level 1, 47 South Terrace, Adelaide
COST (INC. GST) DATE & TIME
$170.00 Master Builders Member/CITB eligible 9.00am to 12.00pm
$230.00 Master Builders Member • 18 February (Wednesday)
$340.00 Non Member/CITB eligible • 17 June (Thursday)
$400.00 Non Member
CPD POINTS 3
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
34 | Master Builders SA Industry Ready TrainingBULLYING AND HARASSMENT
Workplace bullying and harassment can have ADDITIONAL INFORMATION
significant consequences and financial implications
for employers. It is essential for employers to take Participants who successfully complete all of the
steps to eliminate or minimise the risk of bullying and required assessment activities will be issued with a
harassment from occurring and to understand what Certificate of Attendance.
to do when complaints or claims are made.
This course will help employers understand the risks
associated with bullying and harassment and provide
practical steps that employers can take to minimise BESPOKE TRAINING is designed for an individual
the risk of bullying and harassment claims. and/or group specifically for the targeted
audience and is offered on this course. Bespoke
TOPICS COVERED INCLUDE: training is designed to accommodate 8+
• Workplace bullying – what it is and examples of students and can be delivered either onsite at
behaviours Master Builders SA and/or in the convenience
• Reasonable management action of your workplace where the required facilities
• Harassment and Sexual Harassment can be provided. To discuss your bespoke
• Discrimination training requirements and to obtain a quote
• Risks including ‘stress’ claims, ‘stop bullying’ please contact the training department on
applications; unfair dismissal, etc. 8211 7466 or training@mbasa.com.au
• Lessons from the case law
• Obligations under work, health and safety laws
• Tips to minimise the risks and responding to claims
or complaints
LOCATION DURATION
Master Builders SA 4 hours
Level 1, 47 South Terrace, Adelaide
COST (INC. GST) DATE & TIME
$99.00 Master Builders Member 9.00am to 1.00pm
$149.00 Non Member • 5 May (Wednesday)
CPD POINTS 4
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
Master Builders SA Industry Ready Training | 35CHAIN OF RESPONSIBILITY (COR) & LOAD RESTRAINT
On 1 October 2018, the Heavy Vehicle National Law ADDITIONAL INFORMATION
(HVNL) was amended to require every party in the Participants who attend this course will be issued with
heavy vehicle transport supply chain to have a duty a Certificate of Attendance.
to ensure the safety of their transport activities.
New Primary Duty Penalties up to $500k, 5yrs
imprisonment for individual and $3m corporation.
TOPICS COVERED INCLUDE
• COR background
• What is Chain of Responsibility?
• Scope of COR;
• COR Policy
• Corporate Liability
• Example of Breaches
• Load restraint: Legislative requirements, vehicle &
restraint systems and capacity; vehicle selection,
safe driving methods
LOCATION DURATION
Master Builders SA 3 hours
Level 1, 47 South Terrace, Adelaide
COST (INC. GST) DATE & TIME
$99.00 Master Builders Member 1.00pm to 4.00pm
$130.00 Non Member • 25 February (Thursday)
• 19 May (Wednesday)
CPD POINTS 3
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
36 | Master Builders SA Industry Ready TrainingDRUGS & ALCOHOL AWARENESS & REASONABLE SUSPICION
This course is designed to educate all on the affects ADDITIONAL INFORMATION:
drugs and alcohol (D&A) have on individuals, their
ability to perform and safety in the workplace. Participants who attend this course will be issued with
a Certificate of Attendance.
The course is embedded with a risk assessment
process to clearly demonstrate rights, role,
responsibilities and ramifications of illicit substance
abuse.
BESPOKE TRAINING is designed for an individual
and/or group specifically for the targeted
TOPICS COVERED INCLUDE: audience and is offered on this course.
• Drugs, alcohol and the body Bespoke training is designed to accommodate
• The drug epidemic facts 8+ students and can be delivered either
• Behavioural patterns - drugs & alcohol onsite at Master Builders SA and/or in the
• The Law on D&A in the workplace convenience of your workplace where the
• Professional conduct and communication required facilities can be provided. To discuss
• Initiate an unbiased interview your bespoke training requirements and to
• Demonstrate an interview process obtain a quote please contact the training
• Report and review your findings department on 8211 7466 or training@
mbasa.com.au
LOCATION DURATION
Master Builders SA 7 hours
Level 1, 47 South Terrace, Adelaide
DATE & TIME
COST (INC. GST)
9.00am to 4.00pm
$150.00 Master Builder Member • 16 February (Tuesday)
$300.00 Non Member • 20 May (Thursday)
CPD POINTS 7
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
Master Builders SA Industry Ready Training | 37FIRST AID TRAINING
The aim of this course is to provide the neccessary ADDITIONAL INFORMATION:
skills and knowledge to sustain life, reduce pain and
minimise the consequences of injury or sudden illness Participants who sucessfully complete the assessment
unitl professional help arrives. This course is reliant requirements of this course will be issued with a
on either pre-learning or existing prior knowledge of Certificate of Completion including units HLTAID001,
current first aid practices. HLTAID002, HLTAID003
PLEASE NOTE: it is an assessment requirement of this
course that the participant be able to competently
perform two minutes of continuous adult CPR on the
floor.
TOPICS COVERED INCLUDE:
• Roles and responsibilities of the first aider
• Management of unconsious, breathing and non-
breathing casualties using the DRSABCD action
plan
• CPR including the use of an Automated External
Defribulator (AED)
• Management of a choking casualty
• Recognition and treatment of muskuloskeletal
injuries
• Recognition and management of medical
conditions including chest pain, anaphylaxis,
asthma, seizures and stroke
• Treatment of bites and stings including the use of
‘Pressure bandage with immobilisation technique’
LOCATION DURATION
Master Builders SA 6 hours
Level 1, 47 South Terrace, Adelaide
COST (INC. GST) DATE & TIME
$179.00 Master Builder Member 8.30am to 2.30pm
$199.00 Non Member • 18 March (Thursday)
CPD POINTS 6
RTO CODE 88041
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
38 | Master Builders SA Industry Ready TrainingHEALTH & SAFETY REPRESENTATIVE TRAINING
This course is designed for newly elected ADDITIONAL INFORMATION:
representatives in their first year of office. The intent
of the training is to develop skills to represent their You will also need to provide a valid ID number from
work group and exercise their powers and functions SafeWork SA to prior to the course date. This course is
under the Work Health and Safety (WHS) Act. It is certified by SafeWork SA (HSR Level 1).
not intended to train HSRs to be health and safety
professionals or fulfill person Conducting a Business or
Undertaking (PCBU) WHS obligations.
TOPICS COVERED INCLUDE:
• Understand the context of WHS legislation and
practice
• Understand the objects and principles of
the WHS Act
• Identify various elements of the legislative
framework
• Understand the role and functions of the regulator
and their interaction with HSRs
• Understand the safe work approach to work
health and safety issues
LOCATION DURATION
Master Builders SA 5 full days
Level 1, 47 South Terrace, Adelaide
COST (INC. GST) DATE & TIME
$990.00 Master Builder Member 9.00am to 4.00pm
$1165.00 Non Member • 12 to 16 April (Monday, Friday)
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
Master Builders SA Industry Ready Training | 39ON SITE DELIVERY SERVICE
Bianco On-Site Van & Truck Service Specialising in:
Provides a Fast and Personalised • Personal Protective Equipment
Service • Clothing, Embroidery & Footwear
• Power Tools
Bianco’s network of Sales Representatives service • Construction & Workshop Machinery
Residential, Commercial & Civil Construction sites, • Trade & Industrial Hand Tools
Industrial, Mining and Government utilities across • Timber, Floor & Roof Trusses, Second Fix &
Adelaide, throughout South Australia and into the Timber Ancillary Products
Northern Territory. • James Hardie Cladding & Weatherboards
• Nasahi AAC (Autoclaved Aerated Concrete)
Why choose Bianco? Cladding
• Experienced sales team • Rendex Lightweight EPS Cladding
• Fast and reliable service • Plasterboard, Compounds & Accessories
• You don’t need to waste time and money • Cement, Wall Ties & Bricklaying Sundries
chasing products yourself, call us and we will
deliver it promptly!
Proudly affiliated with Bianco Hire, Bianco Reinforcing & Bianco Precast
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. DATE
1300 BIANCO | WWW.BIANCO.COM.AUISO INTEGRATED QUALITY MANAGEMENT SYSTEMS
This course provides you with the opportunity to ADDITIONAL INFORMATION
learn from ATLAS Certification, an industry specialist Participants who attend this course will be issued with
in ISO Certification. In this course you will learn a Certificate of Attendance.
risk management through the implementation of
efficient business systems. Standards covered are This course is purely informative and does not result in
ISO 9001:2016, AS/NZS 4801, ISO 45001:2018, and ISO the issuance of a ticket or licence.
14001:2015.
TOPICS COVERED INCLUDE
• The structure of ISO-based Management Systems
(Plan-Do-Check-Act/Continuous Improvement)
• Understanding of the pathway to Certification
(steps & processes)
• The ability to set SMART objectives in line with the
requirements of the relevant Standards (Quality,
Environment and/or Safety)
• A methodology to identify hazards, assess
risk exposure and determine suitable control
measures to reduce these risks
• An understanding of requirements and processes
for incident/complaint investigation, root cause
determination and definition of Corrective Actions
to prevent recurrence
• An understanding of the requirements relating to
Internal Auditing of the Management System
• The ability to schedule, conduct and record
Management Reviews
• An opportunity to ask specific questions to an
ISO-certification Auditor (Quality, Environment and
Safety)
LOCATION DURATION
Master Builders SA 7 hours
Level 1, 47 South Terrace, Adelaide
COST (INC. GST) DATE & TIME
$270.00 Master Builders Member 9.00am to 4.00pm
$420.00 Non Member • 25 February (Thursday)
CPD POINTS 7
While care has been taken to ensure that information contained is true and correct at the time of publication,
changes in circumstances after the time of publication may impact the accuracy of this information. 03/11/2020
Master Builders SA Industry Ready Training | 41Linea™ 180mm
weatherboards
Upper floor extension
FREE
Reno Guide
THE “8 0 s B u n g a l o w to
C o n te m p o r a r y H a m p to n s”
LOOK
A STORY OF RENOVATION TO RELAXATION
“When we first bought our house, Joe actually hated it. It didn’t always look like
it does now. It used to be a brick bungalow with a bad 80’s reno but I had the
vision of turning it into a Hamptons style home. Thanks to James Hardie’s Linea™
weatherboard, lots of patience and some tears and laughter along the way, we got
the forever home we dreamed of, somewhere our kids can always come back to.”
Scan and download your FREE James Hardie Home Renovation
Guide to help you achieve the renovation you’ve been dreaming of.
Copyright ©2020 James Hardie Australia Pty Ltd ABN 12 084 635 558. ™ and © denotes a trademark or registered mark owned by James Hardie Technology Ltd.You can also read
