ML2000 Series Mortise Locksets - Corbin Russwin
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
ML2000 Series Mortise Locksets
Overview
ML2000 Series
Table of Contents Quality Aesthetics
The ML2000 Series is a Grade 1 mortise Complement any application with the full
lock designed to meet the rigors of range of trim designs and finishes offered
ML2000 Series Overview.........2 high-traffic commercial, institutional, with ML2000 Series. From stainless steel
ML2000 Series Features .......3-4 industrial and government applications. security trims to bright brass Vineyard™
Constructed of heavy-gauge steel, the levers, design continuum can be achieved
ML2000 Series Functions .....5-9 lockbody features our patented Quick without forfeiting aesthetics. For
ML20900 ECL Applications ...10 Reversible latchbolt, and a 1" stainless additional information regarding designer
steel deadbolt. A wide variety of trim trim, see the Corbin Russwin Vineyard™
ML20900 ECL Features .........12 designs and functions and a 10-year Collection and Muséo® Collection
ML20900 ECL Functions .......13 warranty lend to the ML2000’s versatility catalogs.
and reliability, making it the ideal choice
ML20600 NAC Series for use in offices, schools, hospitals, hotels
Electrified Mortise Lock with Key Advantages
and other high-use applications.
High Security Monitoring ......14 • Patented Quick Reversible feature
enables reversal of hands without
NAC Functions .................15-16 Security disassembling the lock case (Patent #
NAC How to Order ...............17 Further discourage intrusion and abuse 6,349,982)
with the ML2000VR (Vandal Resistant) • Security trims provide a vandal-resistant
Trim Designs ....................18-37 barrier
series mortise lock. This lock features
Muséo® Trim .........................38 vandal-resistant stainless steel escutcheons • Can be used with new or existing
with tapered edges and Torx® pin tamper Corbin Russwin key systems. Also
Muséo® Inspire™ accepts cylinders of most other
resistant screws. When matched with
Roseless Trim ........................39 Corbin Russwin patented high-security manufacturers.
cylinders, any door can become a • Provides life safety and security in a
Muséo® Levers .................40-52
formidable barrier to intruders. single door prep, saving the additional
Vineyard™ Collection cost of a deadlock
Trim .................................53-55 • Through-bolted trim designs for proper
alignment and increased security
Vandal Resistant Trim (VR) ......54
Behavioral Health
Trim (BHSS)............................57
Behavioral Health Lever
Trim (BLSS)............................58
Push/Pull Trim (HPSK) ............. 59
Anti-Harm Trim (HSS) ............. 60
Options and Accessories....61-69
How to Order ..................70-72
Quick Codes ....................73-75
How to Specify ................76-78
Reversing Handing ................79
www.corbinrusswin.com
ML2000.2
Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. 45300-5/17Overview
Features
ML2000 Series
Features Hub Certification/Compliance
Handing • Knob: stainless steel, 9/32" (7mm) x ANSI/BHMA
Handed; quick reversible. The lockset can 9/32" (7mm). Certified A156.13 Series 1000,
be re-handed without disassembling the • Lever: steel, 5/16" (8mm). (Including VR ) Operational and Security Grade 1.
lock case; see page 79. Spacing Meets A117.1 Accessibility Code.
Door Thickness C. to c. knob/lever to cylinder: 3-5/8" Federal
1-3/4" (44mm) standard. (92mm). Meets FF-H-106C.
Optional door thicknesses available; see C. to c. knob/lever to thumbturn: 2-7/16"
(62mm). UL/cUL-UL10C Positive Pressure
Quick Codes, page 74. All locks listed for A label and lesser class
Backset Strike doors, 4' (122cm) x 10' (305cm) single or
2-3/4" (70mm). Wrought brass, bronze or stainless steel, 8' (244cm) x 10' (305cm) pair (3 hour fire
ANSI straight lip standard, 4-7/8" (124mm) door). Letter F and UL symbol on armored
Lockcase x 1-1/4" (32mm) x 1-1/8" (29mm) lip to
Heavy-gauge steel, 5-7/8" (149mm) x 4" front indicate listing.
center. Optional strikes, lip lengths and
(102mm) x 15/16" (24mm). ANSI wrought strike box available; see Any retrofit or other field modification to
Optional: non-ferrous lockcase for Quick Codes, page 74. a fire rated opening can potentially impact
corrosion resistance; see Quick Codes, Cylinder the fire rating of the opening, and Corbin
page 74. Brass, 6-pin, L4 keyway, 0-bitted standard. Russwin, Inc. makes no representations or
Front Optional cylinders available; see Quick warranties concerning what such impact
Heavy-gauge steel, 8" (203mm) x 1-1/4" Codes, page 73. may be in any specific situation. When
(32mm) x -3/32" (2mm). Accommodates retrofitting any portion of an existing fire-
Keys rated opening, or specifying and installing
flat doors and doors beveled 1/8" (3mm)
Two nickel silver standard. a new fire-rated opening, please consult
in 2" (51mm). Furnished 1-1/16" (27mm),
optional D138, wide for 1-3/8" (35mm) Keying Features Available with a code specialist or local code official
doors. Master keying (Authority Having Jurisdiction) to ensure
Construction master keying compliance with all applicable codes and
Armored Front ratings.
Visual key control
Wrought brass, bronze or stainless steel
Concealed key control California State Reference Code
attached by machine screws to lockcase
Plug only to show (concealed shell) (Formerly Title 19, California State Fire Marshal
front. ML2000VR utilizes security Torx®
7-pin cylinder Standard)
screws.
Security cylinder All levers with returns, return to within
Latchbolt
Access 3® cylinder 1/2" (13mm) of door face.
2-piece mechanical with anti-friction
Pyramid cylinder Windstorm/Hurricane
insert, 5/8" (16mm) x 1" (25mm) x 3/4"
Interchangeable core (IC) Certified (refer to local codes).
(19mm) throw.
Security IC
Auxiliary Latchbolt Pyramid IC
9/16" (14mm) effective throw and Access 3® IC
3/8" (10mm) effective auxiliary latch Master ring cylinder
deadlocking. Blockout cylinder
Deadbolt Flex head cylinder
One-piece stainless steel, 19/32" (15mm) Warranty
x 1-1/4" (32mm) x 1" (25mm) throw. Ten-year limited.
Occupancy Indicator
Occupancy indicators for use with ML2000
x sectional trim. Design features option
for dual indicators on double cylinder
functions, confirming door is secured from
either side. Emergency override standard
for all non-keyed functions.
VR Indicates ML2000VR (Vandal Resistant) availability.
ML2000.3
45300-5/17 Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.Overview
Features
ML2000 Series
Finishes
ANSI/BHMA 605 (US3) Bright Brass
ANSI/BHMA 606 (US4) Satin Brass
ANSI/BHMA 611 (US9) Bright Bronze
ANSI/BHMA 612 (US10) Satin Bronze
ANSI/BHMA 613 (US10B) Oxidized Bronze, oil rubbed
613E (US10BE) Dark Oxidized Satin Bronze - Equivalent
613L Dark Oxidized Satin Bronze, Clear Coated
ANSI/BHMA 618 (US14) Bright Nickel Plated
ANSI/BHMA 619 (US15) Satin Nickel Plated
ANSI/BHMA 625 (US26) Bright Chromium Plated
ANSI/BHMA 626 (US26D) Satin Chromium Plated
626C Satin Chromium Plated with MicroShield®
ANSI/BHMA 629 (US32) VR Bright Stainless Steel
ANSI/BHMA 630 (US32D) VR Satin Stainless Steel
630C Satin Stainless Steel with MicroShield® Adjustable front
722 Black Oxidized Bronze, oil rubbed accommodates square
or beveled doors
1" deadbolt
throw offers
security and
strength even
with excessive
door gaps
Highly engineered
3 spring design for
smooth, crisp, and
responsive operation
Heavy-duty,
two-piece 3/4"
anti-friction
latchbolt
throw requires
less force to
close door
VR Indicates ML2000VR (Vandal Resistant) availability.
ML2000.4
Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. 45300-5/17Functions
Overview
ML2000 Series
Outside Inside Series/Function Type ANSI No. Function Description
• Latchbolt by grip either side, unless outside grip is locked
by key either side.
Classroom
A01 A01 ML2002 • Outside grip locked or unlocked by cylinder either side.
Intruder
HSS • Auxiliary latch deadlocks latchbolt.
• Inside grip always free.
• Lock or unlock outside grip by key.
• Latchbolt by grip either side, unless outside grip is locked.
A01 ML2003 Classroom
• Inside grip always free.
HSS
• Auxiliary latch deadlocks latch.
R
Passage
• Latchbolt by grip either side.
ML2010 or Closet F01
• Both grips always free.
VR HSS
• Deadbolt by key outside.
A01 ML2011 Deadlock F18
• No inside operation.
VR HSS
A01 A01 ML2012 Deadlock F16 • Deadbolt by key either side.
HSS
A01 ML2013 Deadlock F17 • Deadbolt by key outside or by thumbturn grip inside.
HSS
• Deadbolt by key outside.
Classroom • Thumbturn grip inside retracts deadbolt only; will not
A01 ML2017 F29
Deadlock project deadbolt.
HSS
• Latchbolt by grip* either side, when deadbolt is retracted.
• Deadbolt by thumbturn grip inside or by emergency
Privacy
release tool outside.
ML2020 Bedroom or F02
• No simultaneous deadbolt and latch retraction
R
VR HSS Bathroom • Non-panic release
• Not available with M19S ro M19SN
Indicates Indicator
option is available * When lever handles are furnished, both outside and inside are locked when deadbolt is projected.
VR Indicates function available in Vandal Resistant Trim.
Indicates Indicator
option is available HSS Indicates function available in Anti-Harm Trim
ML2000.5
45300-5/17 Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.Overview
Functions
ML2000 Series
Outside Inside Series/Function Type ANSI No. Function Description
• Latchbolt by grip* either side when deadbolt is retracted.
ML2022 • Deadbolt by key either side.
A01 A01
VR Store Door F14
HSS
• Non-panic release.
• No simultaneous deadbolt and latch retraction
• Latchbolt by grip* either side when deadbolt is retracted.
ML2024 Entrance or • Deadbolt by key outside or by thumbturn grip inside.
A01 F21
VR HSS
Storeroom • Non-panic release.
• No simultaneous deadbolt and latch retraction
• Latchbolt by grip inside and by guest key or master key
outside.
• Outside grip always rigid.
A01 • Deadbolt by thumbturn grip inside or by emergency key
(Hotel Cylinder) ML2029 Hotel or
VR F15 outside.
Motel
• Inside grip simultaneously retracts latchbolt and deadbolt.
• Emergency key shuts out all other keys.
• Auxiliary latch deadlocks latchbolt.
Note: Indicator shows deadbolt position only
• Latchbolt by grip either side unless outside grip locked by
thumbturn
ML2030 Privacy • Deadbolt by thumbturn grip inside or by emergency
R
VR Bedroom or F19 release tool outside.
Bathroom • Inside grip simultaneously retracts latchbolt and deadbolt
and unlocks outside grip.
• Not available with M19S or M19SN
• Latchbolt by key either side.
• Both grips always rigid.
ML2032 Institution or • Auxiliary latch deadlocks latchbolt.
A01 A01 VR F30
HSS
Utility Note: This function does not allow free egress and can pose
a life safety hazard in event of an emergency. Installation
should be in accordance with approved codes only.
• Latchbolt by grip either side, unless outside grip is locked
ML2042 Entrance by key from inside.
VR HSS or Public F09 • Latchbolt by key outside when outside grip is locked.
A01 A02
Restroom • Auxiliary latch deadlocks latchbolt.
• Inside grip always free.
• Latchbolt* by key outside or by grip either side, unless
outside grip is locked by toggle-action stop.
• Deadbolt by key outside or by thumbturn grip inside.
ML2048 Entrance
A01 F08 • Inside grip free when deadbolt is retracted.
VR or
F10 • Non-panic release.
Apartment • No simultaneous deadbolt and latch retraction
Note: Indicator shows deadbolt position only
Half
Dummy
ML2050 Trim Half — • Grip acts as pull only; no operation.
Dummy
Trim
* When lever handles are furnished, both outside and inside are locked when deadbolt is projected.
Indicates Indicator
option is available
VR Indicates function available in Vandal Resistant Trim.
Indicates Indicator HSS Indicates function available in Anti-Harm Trim.
option is available
Indicates rigid grip.
ML2000.6
Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. 45300-5/17Functions
Overview
ML2000 Series
Outside Inside Series/Function Type ANSI No. Function Description
• Latchbolt by key when outside grip locked by toggle action
stop.
Entrance • Latchbolt by grip either side, unless outside grip is locked by
ML2051 F04
A01 or Office toggle-action stop.
VR HSS
• Auxiliary latch deadlocks latchbolt.
• Inside grip always free.
• Latchbolt by grip either side, unless outside grip is locked by
key either side.
• Latchbolt by key when outside grip locked.
A02 A02 Classroom
ML2052 F32 • Auxiliary latch deadlocks latchbolt.
Intruder
HSS • Inside grip always free.
• Outside grip remains locked unless unlocked by key either side.
Note: Not available with indicator, specify ML2002.
• Latchbolt by grip either side, unless outside grip is locked or
unlocked by key or thumbturn.
• Unlocked by key or thumbturn.
A02
Entrance
ML2053 — • Outside grip locked or unlocked by key or thumbturn.
or Office
HSS
• Latchbolt by key when outside grip locked.
• Auxiliary latch deadlocks latchbolt.
• Inside grip always free.
• Latchbolt by grip either side, unless outside grip is locked.
• Outside grip locked or unlocked by thumbturn.
Entrance
A01 ML2054 F04 • Latchbolt by key when outside grip locked.
or Office
HSS • Auxiliary latch deadlocks latchbolt.
• Inside grip always free.
• Latchbolt by grip either side, unless outside grip is locked by
key outside
• Latchbolt by key when outside grip locked
A02
ML2055 Classroom F05 • Auxiliary latch deadlocks latchbolt
VR HSS • Inside grip always free
• Outside grip remains locked unless unlocked by key
Note: Not available with indicator, specify ML2003
• Latchbolt by grip either side, unless outside grip is locked or
unlocked by key.
• Latchbolt by key outside when outside grip is locked.
A02
Classroom • Latchbolt can be held in a retracted position by key, or
ML2056 F06
Holdback released by key.
HSS
• Auxiliary latch deadlocks latchbolt.
• Inside grip always free.
Note: Not approved for use on U.L. fire listed applications.
• Latchbolt by grip inside or by key outside.
Storeroom • Outside grip always rigid.
ML2057 F07
A01 or Closet • Auxiliary latch deadlocks latchbolt.
VR HSS
• Inside grip always free.
• Latchbolt by grip either side, unless outside grip is locked.
• Outside grip locked or unlocked by key or thumbturn.
• Latchbolt retracted by key outside when outside grip is
A02 locked.
Entrance or Office
ML2058 — • Latchbolt can be held in a retracted position by key or
Holdback
HSS thumbturn, or released by key or thumbturn.
• Auxiliary latch deadlocks latchbolt.
• Inside grip always free.
Note: Not approved for use on U.L. fire listed applications.
VR Indicates function available in Vandal Resistant Trim.
Indicates rigid grip.
HSS Indicates function available in Anti-Harm Trim.
ML2000.7
45300-5/17 Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.Overview
Functions
ML2000 Series
Outside Inside Series/Function Type ANSI No. Function Description
• Latchbolt and deadbolt by grip inside or by key outside
Security • Inside grip simultaneously retracts deadbolt & latchbolt
A01 ML2059 Storeroom — • Outside grip always rigid
or Closet • Auxiliary latch deadlocks latchbolt
• Inside grip always free
• Latchbolt by grip either side, except when outside grip is
locked by thumbturn inside.
• Operating inside grip, closing door or operating
ML2060 Privacy F22
emergency key outside unlocks outside grip.
HSS
R
• Inside grip always free.
• Not available with M19S or M19SN
• Latchbolt by grip either side, unless outside grip is locked
by projection of deadbolt
Intruder • Deadbolt thrown or retracted by key from either side
A01 A01 ML2062 F33
Deadbolt • Inside grip simultaneously retracts latchbolt and deadbolt
and unlocks outside grip
• Inside grip always free
• Latchbolt by grip either side unless outside grip locked by
projection of deadbolt.
• Deadbolt thrown or retracted by key outside or by thumbturn
Dormitory or
A01 ML2065 F13 grip inside.
Entrance
• Inside grip simultaneously retracts latchbolt and deadbolt
VR
and unlocks outside grip.
• Inside grip always free.
• Latchbolt by grip either side, unless outside grip is locked
by toggle-action stop or by projection of deadbolt.
• Deadbolt thrown or retracted by key outside or by thumbturn
A01 Apartment grip inside.
ML2067 or F20 • Inside grip simultaneously retracts latchbolt and deadbolt;
Dormitory outside grip remains locked.
VR
• Auxiliary latch deadlocks latchbolt.
• Outside grip unlocked by toggle-action stop
Note: Occupancy Indicator shows deadbolt position only
• Latchbolt by grip either side, unless outside grip is locked
• Outside grip locked or unlocked by key or thumbturn
Privacy
A01 • Operating inside grip, closing the door or using key
ML2068 or
unlocks outside grip
HSS Apartment • Inside grip always free
• Auxiliary latch deadlocks latch
• Latchbolt by grip either side, except when outside is locked by
thumbturn inside.
A02 Institutional • Operating inside grip or closing door unlocks outside grip.
ML2069 F26
Privacy • Key outside retracts latch at all times, even if thumbturn is
HSS
held in locked position.
• Auxiliary latch deadlocks latchbolt.
Full
ML2070 Dummy — • Grips act as pulls only; no operation.
Trim
Indicates Occupancy Indicator VR Indicates function available in Vandal Resistant Trim.
option is available
HSS Indicates function available in Anti-Harm Trim.
Indicates Indicator
option is available Indicates rigid grip.
ML2000.8
Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. 45300-5/17Functions
Overview
ML2000 Series
Outside Inside Series/Function Type ANSI No. Function Description
• Latchbolt by grip from either side unless outside grip is locked by
projection of deadbolt
• Deadbolt thrown or retracted by key from either side
A01 A01 • Inside grip simultaneously retracts latchbolt and deadbolt;
Classroom
ML2072 — outside grip remains locked
Intruder
VR
• Key either side unlocks outside grip; outside grip remains locked
unless unlocked by key
• Auxiliary latch deadlocks latchbolt
Note: Indicator shows deadbolt position only
• Latchbolt by grip from either side unless outside grip is locked by
projection of deadbolt
• Deadbolt thrown or retracted by key
• Inside grip simultaneously retracts latchbolt and deadbolt;
A01 Classroom
ML2073 — outside grip remains locked
Security
• Key unlocks outside grip; outside grip remains locked unless
VR
unlocked by key
R
• Auxiliary latch deadlocks latchbolt
Note: Indicator shows deadbolt position only
• Latchbolt by grip from either side unless outside grip is locked by
projection of deadbolt
• Deadbolt thrown or retracted by outside key or inside
thumbturn
A01 Security
• Inside grip simultaneously retracts latchbolt and deadbolt;
ML2075 Entrance —
outside grip remains locked
VR or Office • Key unlocks outside grip; outside grip remains locked unless
unlocked by key
• Auxiliary latch deadlocks latchbolt
Note: Indicator shows deadbolt position only
Half Active
• Non-latching operation
ML2080 Dummy —
• Grip always active; acts as push or pull only
Trim
• Latchbolt by grip either side, unless outside grip is locked
by toggle-action stop or by projection of deadbolt
• Deadbolt thrown by key from either side
A01 A01 • Deadbolt and latchbolt retracted by outside key when
Dormitory
ML2082 F11 outside grip locked
or Exit
VR • Outside grip unlocked by toggle-action stop
• Inside grip simultaneously retracts latchbolt and deadbolt;
outside grip remains locked
Note: Indicator shows deadbolt position only
Full Active
• Non-latching operation
ML2090 Dummy —
• Both grips always active; acts as push or pulls only
HSS Trim
• Latchbolt by key either side
• Deadbolt thrown and retracted by key either side
• Auxiliary latch deadlocks latchbolt
Security
A01 A01 • Inside and outside grips remain locked at all times
ML2092 Institution —
Note: Indicator shows deadbolt position only
VR HSS
or Utility Note: This function does not allow free egress and can pose a life
safety hazard in event of an emergency. Installation should be in
accordance with approved codes only.
VR Indicates function available in Vandal Resistant Trim.
Indicates rigid grip. Indicates Indicator option
is available HSS Indicates function available in Anti-Harm Trim.
ML2000.9
45300-5/17 Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.Features
ML20900 ECL & ML20600NAC
Features Cylinder Certification/Compliance
Brass, 6-pin, L4 keyway, 0-bitted standard.
Handing Optional cylinders available; see Quick ANSI/BHMA
Handed; quick reversible. The lockset can Codes, page 73. Certified A156.13 Series 1000,
be re-handed without disassembling the operational and security Grade 1.
Keys
lockcase. Meets A117.1 Accessibility Code.
Two nickel silver standard.
Door Thickness Warranty Federal
1-3/4" (44mm) standard. Optional door Ten-year limited warranty on ML2000 Meets FF-H-106C.
thicknesses available; see Quick Codes, mortise lockset. Two-year limited warranty UL/cUL
page 74. on electronic components. All locks listed for A label and lesser class
Backset Electrical Specifications doors, 4' x 10' single or 8' x 10' pair.
2-3/4" (70mm). (Fail Safe/Fail Secure) Letter F and UL symbol on armored front
Lockcase 12/24VDC @ 15mA Continuous indicate listing. Meets requirements of
Heavy-gauge steel, 5-7/8" (149mm) x 4" 12/24VDC Peak current draw = .5A UL1034.
(102mm) x 15/16" (24mm). (Maximum of 2 locks per 1A Power Supply) Any retrofit or other field modification to
Monitor Switch Rating: 2 amp @ 24VDC
Front a fire rated opening can potentially impact
Note: Operating voltage not to exceed
Heavy gauge steel, 8" (203mm) x 1-1/4" +/- 10%. the fire rating of the opening, and Corbin
(32mm) x 3/32" (2mm). See Quick Codes, page 75. Russwin, Inc. makes no representations or
Accommodates flat doors and doors warranties concerning what such impact
Monitor Options - ML20900 ECL Only may be in any specific situation. When
beveled 1/8" (3mm) in 2" (51mm).
M91 - Latchbolt Monitor retrofitting any portion of an existing fire-
Armored Front Latchbolt monitoring is a SPDT switch rated opening, or specifying and installing
Wrought brass, bronze or stainless steel which monitors the full extension of the a new fire-rated opening, please consult
attached by machine screws to lockcase main latch. with a code specialist or local code official
front. M92 - Request to Exit Monitor (Authority Having Jurisdiction) to ensure
Latchbolt Request to Exit monitoring is a SPDT switch compliance with all applicable codes and
2-piece mechanical anti-friction insert, which monitors the activation of the trim. ratings.
5/8" (16mm) x l" (25mm) x 3/4" (19mm) (Both levers activate switch)
California State Reference Code
throw. M105 - Security Monitor (Formerly Title 19, California State Fire Marshal
Auxiliary Latchbolt Security Monitor is two switches in series Standard)
that monitors lock status (locked or All levers with returns comply; levers return
9/16" (14mm) effective throw and
unlocked) and Auxiliary Latch position. to within 1/2" of door face.
3/8" (10mm) effective auxiliary latch Note: Monitoring options may only be
deadlocking. ordered together as follows: M91xM92,
Hub M92xM105.
• Knob: stainless steel, 9/32" (7mm) x Monitor Options –
9/32" (7mm). ML20600 NAC only One-piece,
6-pin solid brass cylinder;
corrosion-
• Lever: steel, 5/16" (8mm). (Including VR ) Internal End-of-Line resistant, Corbin Russwin and competitive
cylinder compatibility available
Spacing Monitoring heavy-
C. to c. knob/lever to cylinder: 3-5/8" Monitors the line from gauge steel
front
(92mm) the access control
C. to c. knob/lever to thumbturn: 2-7/16" panel to the lock, Completely
(62mm). eliminating the risk of self-contained
Strike undetected tampering actuator; lock
Wrought brass, bronze or stainless steel or damage. fits in standard
mortise door Heavy-gauge
ANSI straight lip standard, 4-7/8" (124mm) PHR – Deadbolt prep internal parts
x 1-1/4" (32mm) x 1-1/8'' (29mm) lip to Privacy Function
center. Optional strikes, lip lengths and Engaging deadbolt Latch
ANSI wrought strike box available; see disables remote
Quick Codes, page 74. access control Auxiliary
Trim unlocking (keypad or Latch
Available with all ML2000 Series trim card reader) or
designs including the Vineyard™ scheduled unlock.
Available to match Corbin
Collection and the Muséo® Collection. See Russwin trim designs
pages 18-60.
ML2000.10
Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. 45300-5/17Overview
ML20900 ECL
ML20900 ECL Series
Electrified Mortise Lockset
Simplicity Security Aesthetics
Combine simplicity and access control In applications where increased Access control doesn’t mean a loss of
with the Corbin Russwin ML20900 security is required, look no further visual appeal. The Vineyard™
ECL series electrically controlled than the ML2000VR Vandal Resistant Collection and the Muséo® Collection
mortise lock. Utilizing the proven Trim. This cast stainless steel trim feature beautifully designed levers,
ML2000 Series mortise lockset features tapered edges, double perfect for high-profile applications
with the patented quick reversible through bolts, torx-pin tamper where pleasing aesthetics is a must.
latchbolt, the ML20900 series provides resistant screws and the lever remains Additional Features
remote locking and unlocking. The attached to the escutcheon when • Mechanical key override
electrified lock can be installed in a the spindle is broken. • Patented Quick Reversible latchbolt,
standard mortise prep with slight Patent # 6,349,982
modification by door manufacturer.
The ML20900 ECL is ideal for use
where increased security is necessary Featuring EcoFlex™ Technology*:
at all times, such as tenant space, • Reduces energy consumption up to
pharmacies, computer rooms, and 96%, as certified by GreenCircle
high security areas. – Lower operating costs
– Assists with load reduction in
optimizing energy performance
credit in LEED
– Reduces number of power
supplies required
• Field configurable to fail-safe or fail-
secure
• Operates from 12-24VDC, offering
Typical Application greater flexibility in system design
BPS
Supply
• Innovative actuator design provides
Series superior reliability
Power – Higher performance and reduced
Supply Power Input maintenance
– Ability to have longer cable runs
without negatively impacting lock
function
Wires in Conduit
– Reduces risk of voltage drops and
(If Frames Are Filled)
eliminates inductive kickback
– Lower total cost of ownership
Door Cable
Door Control * Patent Pending
PB Push Buttons
Mortar Guard ML20900 ECL
Electric Thru
(If Frames Are Filled)
Wire Hinge
EPT
EPTL
Power Transfers
ML2000.11
45300-5/17 Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.Overview
Typical System Components (For Reference Only)
ML2000 Series
ML20900 ECL
Tower Stairwell Access Control on Employee Entrance
BPS
BPS
To Fire Alarm Power 115VAC
Power 115VAC
Supply Input
Supply Input
Wires in
Wires in
Conduit
Conduit
(If Frames
(If Frames
Are Filled)
Are Filled)
2 x 18AWG
2 x 18AWG
ML20906 Access
Wire Transfer ML20906
Electric Control Wire Transfer
Hinge Electric
Mortise Lock Reader Hinge
EPT Mortise Lock
HID EPT
EPTL
Prox EPTL
Operation: Operation:
Free egress at all times. Door is locked at all times preventing Free egress at all times. Door is locked at all times preventing
entry from the stairwell to a floor. Fire alarm activation will allow unauthorized entry. Authorized entry is permitted by presenting a
re-entry from the stairwell to the floor. Power failure will allow valid user card.
re-entry from the stairwell to the floor.
ElectroLynx®, a system of universal
Molex® plug-in connectors and
Controlled Entry With Alarm standardized color-coded wiring,
makes installing electrified doorway
components a snap!
BPS
Power
115VAC
Input
Lock Schematics
Supply Power Leads Power Leads x M92
Alarm Horn
(Request to Exit)
Wires in Red +
Red +
Conduit
(If Frames AC/DC AC/DC
Black+ -
Red Black+ -
Red
Are Filled)
AC/DC AC/DC
2 x 18AWG Black - Black -
6 x 22AWG White
Access Green
Control ML20906 x Wire Transfer Orange
Reader M91 x M92 Hinge
White
Electric Green
HID EPT Orange
Prox Mortise Lock EPTL
Power Leads x M91 Power Leads x M105
(Latchbolt Monitor) (Security Monitor)
Operation: Red + Red +
Free egress at all times. User exits through the door which Black - Black -
triggers the M92 switch which shunts the alarm. Door is locked Blue
Red +
Blue
Red +
at all times preventing unauthorized entry. Authorized entry is Black
Brown- Black -
Brown
Blue
permitted by presenting a valid user card. Forced entry will trigger Blue
Yellow Yellow
M91 switch and activate alarm. Alarm is deactivated by a valid Brown Brown
user card. Yellow Yellow
Consult factory for electrical system layouts, riser and wiring diagrams.
ML2000.12
Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. 45300-5/17Functions
Overview
ML2000
ML20900Series
ECL
Fail Safe
The following functions are unlocked when power is off and locked when the power is on.
Outside Inside Series/Function Description
• Latchbolt by grip either side, unless outside grip is locked by energizing lock.
ML20907 x SAF • Inside grip always free.
VR • Auxiliary latch deadlocks latchbolt.
• Latchbolt by grip either side, unless both grips are locked by energizing lock.
ML20915 x SAF
• Auxiliary latch deadlocks latchbolt.
VR
• Latchbolt by grip either side, unless both grips are locked by energizing lock.
ML20914 x SAF • Latchbolt by key outside when lock is energized.
A01 VR • Auxiliary latch deadlocks latchbolt.
• Latchbolt by grip either side, unless both grips are locked by energizing lock.
ML20932 x SAF • Latchbolt by key inside or outside when lock is energized.
A01 A01 VR • Auxiliary latch deadlocks latchbolt.
• Latchbolt by grip either side, unless outside grip is locked by energizing lock.
• Latchbolt by key outside when lock is energized.
ML20906 x SAF
• Inside grip always free.
A01 VR
• Auxiliary latch deadlocks latchbolt.
Fail Secure
The following functions are locked when power is off and unlocked when the power is on.
Outside Inside Series/Function Description
• Latchbolt by grip either side only when lock is energized.
• Outside grip locked when lock is not energized.
ML20907 x SEC
• Inside grip always free.
VR • Auxiliary latch deadlocks latchbolt.
• Latchbolt by grip either side only when lock is energized.
ML20915 x SEC • Both grips locked when lock is not energized.
VR • Auxiliary latch deadlocks latchbolt.
• Latchbolt by grip either side only when lock is energized.
• Both grips locked when lock is not energized.
ML20914 x SEC
• Latchbolt by key outside when lock is not energized.
A01 VR • Auxiliary latch deadlocks latchbolt.
• Latchbolt by grip either side only when lock is energized.
• Both grips locked when lock is not energized.
ML20932 x SEC
A01
• Latchbolt by key inside or outside when lock is not energized.
A01 VR
• Auxiliary latch deadlocks latchbolt
• Latchbolt by grip either side only when lock is energized.
• Outside grip locked when lock is not energized.
ML20906 x SEC • Latchbolt by key outside when lock is not energized.
A01 VR • Inside grip always free.
• Auxiliary latch deadlocks latchbolt.
VR Indicates function available in Vandal Resistant Trim.
ML2000.13
45300-5/17 Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.Overview
ML20600 NAC
ML20600 NAC Series Electrified Mortise Lock
with High Security Monitoring
The high security monitoring options of our industry-leading Integrated Wiegand
locks are now available in a mortise lock with ElectroLynx® connectors that can be Featuring EcoFlex™ Technology*:
used as a stand-alone electrified lock or in conjunction with a wall reader. Every • Reduces energy consumption up to
NAC lock is shipped with door position and request to exit monitoring installed. 96% as certified by GreenCircle
NAC locks ordered with deadbolt are supplied with deadbolt monitoring. (PHR – Lower operating costs
options will replace deadbolt monitoring with deadbolt privacy) – Assists with load reduction in
optimizing energy performance
credit in LEED
High Security Monitoring Options – Reduces number of power
supplies required
• Internal End-of-Line Monitoring
• Field configurable to fail-safe or fail-
Integrated directly into the mortise lock, internal end-of-line resistors monitor
the line from the access control panel to the lock. Typically, resistors are secure
installed at the panel or above the door, creating vulnerability between the • Operates from 12-24VDC, offering
resistors and the locks. Incorporating resistors within the lock eliminates any greater flexibility in system design
risk of undetected tampering or damage, while also reducing installation costs, • Innovative actuator design provides
simplifying specifications, and offering the assurance of a factory installed and superior reliability
tested product. – Higher performance and reduced
maintenance
Select a compatible resistor configuration and add the appropriate quick code – Ability to have longer cable runs
to the beginning of your order string:
without negatively impacting lock
– R01: Mercury and Lenel compatible 1KΩ/2KΩ resistance supervision
– R03: Software House compatible 1KΩ/2KΩ resistance supervision function
– R04: AMAG compatible 4-state supervision – Reduces risk of voltage drops and
eliminates inductive kickback
• Deadbolt Privacy Function (PHR) – Lower total cost of ownership
– Engaging the deadbolt disables remote access control unlocking (keypad or
card reader) or scheduled unlock.
– Ideal for personal privacy areas, such as nursing rooms, on-call doctors’
rooms, restrooms, and shower areas
– To order, add the PHR to the options of your order string available with SEC
deadbolt functions only (ML20608 x SEC or ML20609 x SEC)
ML2000.14
Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. 45300-5/17Functions
ML20600 NAC
Outside Inside Series/Function Type Function Description
• Fail Safe - Power off unlocks outside trim
ML20607 x NAC x SAF • Deadlocking latch
Fail Safe Entry • Latch retracted by inside lever at all times
No Key Override No Deadbolt • Outside lever rigid except when lock is not energized
• Request to exit and secure door position monitor are standard
• Fail Safe - Power off unlocks outside trim
ML20606 x NAC x SAF • Deadlocking latch
A01
Fail Safe • Latch retracted by inside lever at all times
Entry
With Key Override No • Outside lever rigid except when lock is not energized
Deadbolt • Key outside retracts latch
• Request to exit and secure door position monitor are standard
• Fail Safe - Power off unlocks outside trim
ML20609 x NAC x SAF • Deadlocking latch
Fail Safe Entry • Latch and deadbolt retracted by inside lever at all times
No Key Override With With Deadbolt • Outside lever rigid except when lock is not energized
Deadbolt • Turnpiece inside extends and retracts deadbolt
• Request to exit and secure door position monitor are standard
• Fail Safe - Power off unlocks outside trim
• Deadlocking latch
ML20608 x NAC x SAF
A01 • Latch and deadbolt retracted by inside lever and deadbolt at all times
Fail Safe Entry
• Outside lever rigid except when lock is not energized
With Key Override With With Deadbolt
• Key outside projects or retracts deadbolt and retracts latch
Deadbolt
• Turnpiece inside extends and retracts deadbolt
• Request to exit and secure door position monitor are standard
ML2000.15
45300-5/17 Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.Functions
ML20600 NAC
Outside Inside Series/Function Type Function Description
• Fail Secure - Power off, trim outside is locked
ML20607 x NAC x SEC • Deadlocking latch
Fail Secure Entry • Latch retracted by inside lever at all times
No Key Override No Deadbolt • Outside lever rigid except when lock is energized
• Request to exit and secure door position monitor are standard
• Fail Secure - Power off, trim outside is locked
ML20606 x NAC x SEC • Deadlocking latch
A01
Fail Secure • Latch retracted by inside lever at all times
Entry
With Key Override No • Outside lever rigid except when lock is energized
Deadbolt • Key outside retracts latch
• Request to exit and secure door position monitor are standard
• Fail Secure - Power off, trim outside is locked
ML20609 x NAC x SEC • Deadlocking latch
Fail Secure Entry • Latch and deadbolt retracted by inside lever at all times
No Key Override With With Deadbolt • Outside lever rigid except when lock is energized
Deadbolt • Turnpiece inside extends and retracts deadbolt
• Request to exit and secure door position monitor are standard
• Fail Secure - Power off, trim outside is locked
• Deadlocking latch
ML20608 x NAC x SEC
A01 • Latch and deadbolt retracted by inside lever and deadbolt at all times
Fail Secure Entry
• Outside lever rigid except when lock is energized
With Key Override With With Deadbolt
• Key outside projects or retracts deadbolt and retracts latch
Deadbolt
• Turnpiece inside extends and retracts deadbolt
• Request to exit and secure door position monitor are standard
ML2000.16
Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. 45300-5/17How to Order
ML20600 NAC
Ordering Examples
Stock Order
High Security
Fail-Safe/
Quantity Series/Function Technology Code Trim Finish Hand Monitoring
Fail-Secure
Options
24 ML20608 NAC 111X 626 RHR SEC PHRR01
• ML2000 Mortise Lock x NAC x No Cylinder x Deadbolt x Fail-Secure
• Muséo® lever 111 with X rose
• Satin chrome finish
• Right hand reverse
• Deadbolt privacy function, Mercury and Lenel compatible 1KΩ/2KΩ resistance supervision
Stock Order
High Security
Fail-Safe/
Quantity Series/Function Technology Code Trim Finish Hand Monitoring
Fail-Secure
Options
24 ML20607 NAC 111X 626 RHR SEC R03
• ML2000 Mortise Lock x NAC x No Cylinder x No Deadbolt x Fail-Secure
• Muséo® lever 111 with X rose
• Satin chrome finish
• Right hand reverse
• Software House compatible 1KΩ/2KΩ resistance supervision
ML2000.17
45300-5/17 Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.Overview
Trim Designs
ML2000 Series,
Series ML20900 ECL and ML20600 NAC
Lustra
Complies with codes requiring lever to return to
within 1/2" (13mm) of door face. Brass, bronze or
stainless steel.
LWA
Lever: Wrought
Rose: Wrought
LWB
Lever: Wrought 2-1/4
Rose: Cast (57)
LWA 5-1/8
LSA (130)
Lever: Cast 2-1/2*
(64)
Rose: Wrought
LSB
Lever: Cast
Rose: Cast
LWF 2-7/8
Lever: Wrought (73)
Rose: Cast
LWF 5-1/8
(130)
LSF 2-1/2*
Lever: Cast (64)
Rose: Cast
Dimensions:
inches
millimeters *Dimension from face of door, not surface of rose or escutcheon.
ML2000.18
Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. 45300-5/17TrimOverview
Designs
ML2000 Series, ML20900 ECL and ML20600
ML2000 Series
NAC
LWM
Lever: Wrought
Escutcheon: Wrought
Optional: Plug only to show; master ring
LSM
Lever: Cast *
Escutcheon: Wrought *
Optional: Plug only to show; master ring
LWN
Lever: Wrought
Escutcheon: Wrought
LSN
Lever: Cast
Escutcheon: Wrought *
*
LWP
Lever: Wrought
Escutcheon: Wrought
LSP
Lever: Cast
Escutcheon: Wrought *
Note: P Series escutcheon is not compatible with
ML20900 ECL or ML20600 NAC mortise locks *
*
LWR
Lever: Wrought
Escutcheon: Solid stainless steel; forged
brass
Optional: Plug only to show
Door thickness: 1-3/8" (35mm),
1-3/4" (44mm), 2-1/4" (57mm)
LSR
Lever: Cast
Escutcheon: Solid stainless steel, *
*
forged brass *
Optional: Plug only to show
*Dimension from face of door, not surface of rose or
escutcheon. Door thickness: 1-3/8" (35mm),
1-3/4" (44mm), 2-1/4" (57mm)
ML2000.19
45300-5/17 Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.Overview
Trim Designs
ML2000 Series,
Series ML20900 ECL and ML20600 NAC
Regis
Brass, bronze or stainless steel
RWA
Lever: Wrought 2-1/4
(57)
Rose: Wrought
4-7/8
RWB 2-1/2*
(124)
Lever: Wrought (64)
Rose: Cast
RSA
Lever: Cast 2-1/4
(57)
Rose: Wrought
4-3/8
(111)
RSB 2-1/2*
Lever: Cast (64)
Rose: Cast
2-7/8
(73)
RWF 4-7/8
Lever: Wrought (124)
Rose: Cast 2-1/2*
(64)
RSF 2-7/8
(73)
Lever: Cast
Rose: Cast
4-3/8
(111)
2-1/2*
(64)
*Dimension from face of door, not surface of rose or escutcheon.
ML2000.20
Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. 45300-5/17TrimOverview
Designs
ML2000 Series, ML20900 ECL and ML20600
ML2000 Series
NAC
RWM
Lever: Wrought
Escutcheon: Wrought
Optional: Plug only to show; master ring 4-7/8
(124)
*
*
RSM
Lever: Cast
Escutcheon: Wrought
RS
Optional: Plug only to show; master
4-7/8 ring 4-7/8
4-3/8
4-7/8
(124)
(124) (111)
* * (124)
* *
*
*
RWN
Lever: Wrought 4-7/8 4-3/8
4-7/8
RS
*
Escutcheon: Wrought (124)
*
(111)
(124)
* ** 4-7/8
4-7/8 RS
(124) 4-7/8
(124)
4-3/8
(124)
* * (111)
*
*
RSN
RSM
4-7/8 4-3/8
(124) (111)
*
Lever: Cast * * 4-7/8
Escutcheon: Wrought 4-7/8
*
(124)
4-7/8 RS
(124) * (124)
4-3/8
* * (111)
4-7/8
4-7/8
(124) (124)
* 4-7/8 RS
4-7/8 * (124)
4-3/8 R
*
(124) 4-3/8
(111)
* (111)
RWP
* * *
4-7/8 *
RSN
(124)
Lever: Wrought 4-3/8
4-7/8
* (111)
Escutcheon: Wrought 4-7/8 *
(124)
* 4-7/8
(124) (124)
R
* *
4-7/8 4-3/8
4-7/8
(124)4-7/8 (111)
(124)
RS
(124) *
RSP
4-3/8
* * * (111)
Lever: Cast 4-7/8
(124)
*
4-3/8
Escutcheon: Wrought *
4-7/8
(111)
(124)
RS
4-3/8
Note: P Series escutcheon is not compatible with * * (111)
4-7/8 4-7/8
ML20900 ECL or ML20600 NAC mortise(124) locks *
(124)
* 4-7/8 *
RWR *
(124)
4-3/8
R
4-3/8
Lever: Wrought (111)
(111)
Escutcheon: Solid stainless steel;4-7/8
forged brass
(124) *
*
4-7/8
Optional: Plug only to show (124)
*
Door thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm) *
R
4-3/8
RSR 4-7/8
(124)
(111)
Lever: Cast *
*
Escutcheon: Solid stainless steel; forged brass
Optional: Plug only to show 4-3/8
(111)
*Dimension from face of door, not surface of rose or Door thickness: 1-3/8" (35mm), 1-3/4" (44mm), 2-1/4" (57mm)
*
escutcheon.
ML2000.21
45300-5/17 Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.Overview
Trim Designs
ML2000 Series,
Series ML20900 ECL and ML20600 NAC
Citation
• Brass, bronze or stainless steel
• Laser engraving option
(See Custom Laser Engraving brochure)
CSA
Lever: Cast 2-1/4
Rose: Wrought (57)
CSA/CSB
4-3/8
2-5/8* (111)
CSB (67)
Lever: Cast
Rose: Cast
2-7/8
(73)
CSF
Lever: Cast CSF
Rose: Cast
4-3/8
(111)
2-5/8*
(67)
*Dimension from face of door, not surface of rose or escutcheon.
ML2000.22
Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. 45300-5/17TrimOverview
Designs
ML2000 Series, ML20900 ECL and ML20600
ML2000 Series
NAC
2-1/4
(57)
CSM
7-1/2
Lever: Cast (190)
Escutcheon: Wrought 4-3/8
Optional: (111)
• Plug only to show; master ring 2-5/8*
• Laser engraving on lever or escutcheon (67)
2-1/4
(57)
CSN 7-1/2
Lever: Cast (190)
Escutcheon: Wrought 4-3/8
(111)
Optional: Laser engraving on lever
2-5/8*
(67)
1-5/8
(41)
CSP
Lever: Cast
7
Escutcheon: Wrought (178)
Optional: Laser engraving on lever 4-3/8 CS
Note: P Series escutcheon is not compatible with (111)
ML20900 ECL or ML20600 NAC mortise locks
2-5/8*
(67)
1-3/4
(44)
CSR
Lever: Cast
Escutcheon: Solid stainless steel; CS
forged brass
Optional: 8-1/2
(216)
• Plug only to show 4-3/8
• Laser engraving on lever (111)
Door thickness: 1-3/8" (35mm),
1-3/4" (44mm), 2-1/4" (57mm) 2-5/8*
(67)
*Dimension from face of door, not surface of rose or escutcheon.
ML2000.23
45300-5/17 Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.Overview
Trim Designs
ML2000 Series,
Series ML20900 ECL and ML20600 NAC
Newport
• Complies with codes requiring lever to return to
within 1/2" (13mm) of door face.
• Brass, bronze or stainless steel
• Laser engraving option
(See Custom Laser Engraving brochure)
NSA
Lever: Cast
Rose: Wrought 2-1/4
(57)
4-13/16
(122)
NSB 2-5/8*
Lever: Cast (67)
Rose: Cast
2-7/8
NSF (73)
Lever: Cast
Rose: Cast
4-13/16
(122)
2-5/8*
(67)
*Dimension from face of door, not surface of rose or escutcheon.
ML2000.24
Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. 45300-5/17TrimOverview
Designs
ML2000 Series, ML20900 ECL and ML20600
ML2000 Series
NAC
2-1/4
(57)
NSM
Lever: Cast
Escutcheon: Wrought 7-1/2
NS
(190)
Optional: 4-13/16
(122)
• Plug only to show; master ring
• Laser engraving on lever or escutcheon
2-5/8*
(67)
2-1/4
(57)
NSN
Lever: Cast 7-1/2
Escutcheon: Wrought (190)
Optional: Laser engraving on lever 4-13/16
(122)
2-5/8*
(67)
1-5/8
(41)
NSP
Lever: Cast
7
Escutcheon: Wrought (178)
Optional: Laser engraving on lever 4-13/16
(122)
Note: P Series escutcheon is not compatible with
ML20900 ECL or ML20600 NAC mortise locks
2-5/8*
(67)
1-3/4
(44)
NSR
Lever: Cast
Escutcheon: Solid stainless steel;
forged brass
Optional: 8-1/2
• Plug only to show (216) 4-13/16
• Laser engraving on lever (122)
Door thickness: 1-3/8" (35mm),
1-3/4" (44mm), 2-1/4" (57mm) 2-5/8*
(67)
*Dimension from face of door, not surface of rose or escutcheon.
ML2000.25
45300-5/17 Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.Overview
Trim Designs
ML2000 Series,
Series ML20900 ECL and ML20600 NAC
Armstrong
• Brass, bronze or stainless steel
• Laser engraving option
(See Custom Laser Engraving brochure)
ASA
Lever: Cast
Rose: Wrought 2-1/4
(57)
4
(102)
ASB 2-5/8*
Lever: Cast (67)
Rose: Cast
2-7/8
(73)
ASF
Lever: Cast
Rose: Cast
4
(102)
2-5/8*
(67)
*Dimension from face of door, not surface of rose or escutcheon.
ML2000.26
Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. 45300-5/17TrimOverview
Designs
ML2000 Series, ML20900 ECL and ML20600
ML2000 Series
NAC
2-1/4
(57)
ASM
Lever: Cast
7-1/2
A
Escutcheon: Wrought (190)
Optional: 4-1/2
(114)
• Plug only to show; master ring
• Laser engraving on lever or escutcheon 2-5/8*
(67)
2-1/4
(57)
ASN
Lever: Cast
7-1/2
A
Escutcheon: Wrought (190)
Optional: Laser engraving on lever 4-1/2
(114)
2-5/8*
(67)
1-5/8
(41)
ASP
Lever: Cast
7
Escutcheon: Wrought (178)
Optional: Laser engraving on lever 4-1/2
(114)
Note: P Series escutcheon is not compatible with
ML20900 ECL or ML20600 NAC mortise locks
2-5/8*
(67)
1-3/4
(44)
ASR
Lever: Cast
Escutcheon: Solid stainless steel;
forged brass 8-1/2
Optional: (216)
4-1/2
• Plug only to show (114)
• Laser engraving on lever
Door thickness: 1-3/8" (35mm),
2-5/8*
1-3/4" (44mm), 2-1/4" (57mm) (67)
*Dimension from face of door, not surface of rose or escutcheon.
ML2000.27
45300-5/17 Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.Overview
Trim Designs
ML2000 Series,
Series ML20900 ECL and ML20600 NAC
Dirke
Brass, bronze or stainless steel
• Not reversible
• Handed levers
DSA
Lever: Cast
Rose: Wrought 2-1/4
Specify hand (57)
DSA
4-1/2
DSB 2-9/16* (114)
Lever: Cast (65)
Rose: Cast
Specify hand
2-7/8
(73)
DSF
Lever: Cast DSF
Rose: Cast 4-1/2
Specify hand (114)
2-9/16*
(65)
*Dimension from face of door, not surface of rose or escutcheon.
ML2000.28
Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. 45300-5/17TrimOverview
Designs
ML2000 Series, ML20900 ECL and ML20600
ML2000 Series
NAC
2-1/4
DSM (57)
Lever: Cast
Escutcheon: Wrought
Optional: Plug only to show; master ring
7-1/2
DSM
Specify hand (190)
4-1/2
(114)
2-9/16*
(65)
2-1/4
(57)
DSN
Lever: Cast
Escutcheon: Wrought
Specify hand 7-1/2 DSN
(190)
4-1/2
(114)
2-9/16*
(65)
1-5/8
(41)
DSP
Lever: Cast
7
Escutcheon: Wrought (178)
Specify hand 4-1/2
(114)
Note: P Series escutcheon is not compatible with
ML20900 ECL or ML20600 NAC mortise locks
2-9/16*
(65)
1-3/4
(44)
DSR
Lever: Cast
Escutcheon: Solid stainless steel;
forged brass
Optional: Plug only to show 8-1/2
Door thickness: 1-3/8" (35mm), (216)
4-1/2
1-3/4" (44mm), 2-1/4" (57mm) (114)
Specify hand
2-9/16*
(65)
ML2000.29
45300-5/17 Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.Overview
Trim Designs
ML2000 Series,
Series ML20900 ECL and ML20600 NAC
Essex
Complies with codes requiring lever to return to
within 1/2" (13mm) of door face.
Brass, bronze or stainless steel
ESA
Lever: Cast
Rose: Wrought 2-1/4
(57)
ESA 4-5/8
(117)
ESB 2-3/8*
(60)
Lever: Cast
Rose: Cast
2-7/8
(73)
ESF
Lever: Cast
Rose: Cast ESF 4-5/8
(117)
2-3/8*
(60)
*Dimension from face of door, not surface of rose or escutcheon.
ML2000.30
Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. 45300-5/17TrimOverview
Designs
ML2000 Series, ML20900 ECL and ML20600
ML2000 Series
NAC
2-1/4
(57)
ESM
Lever: Cast
Escutcheon: Wrought E
Optional: Plug only to show; master ring 7-1/2
(190) 4-5/8
(117)
2-3/8*
(60)
2-1/4
(57)
ESN
Lever: Cast 7-1/2 E
(190) 4-5/8
Escutcheon: Wrought (117)
2-3/8*
(60)
1-5/8
(41)
ESP
Lever: Cast 7
Escutcheon: Wrought (178) 4-5/8
(117)
Note: P Series escutcheon is not compatible with
ML20900 ECL or ML20600 NAC mortise locks
2-3/8*
(60)
1-3/4
(44)
ESR
Lever: Cast
Escutcheon: Solid stainless steel;
forged brass
Optional: Plug only to show 8-1/2
(216) 4-5/8
Door thickness: 1-3/8" (35mm), (117)
1-3/4" (44mm), 2-1/4" (57mm)
2-3/8*
(60)
*Dimension from face of door, not surface of rose or escutcheon.
ML2000.31
45300-5/17 Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited.Overview
Trim Designs
ML2000 Series,
Series ML20900 ECL and ML20600 NAC
Princeton
• Complies with codes requiring lever to return to
within 1/2" (13mm) of door face.
• Brass, bronze or stainless steel
• Laser engraving option
(See Custom Laser Engraving brochure)
PSA
Lever: Cast
Rose: Wrought 2-1/4
(57)
PSA 5-1/4
(133)
PSB 2-1/2*
(64)
Lever: Cast
Rose: Cast
2-7/8
(73)
PSF
Lever: Cast PSF 5-1/4
Rose: Cast (133)
2-1/2*
(64)
*Dimension from face of door, not surface of rose or escutcheon.
ML2000.32
Copyright © 2001-2017 Corbin Russwin, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Corbin Russwin, Inc. is prohibited. 45300-5/17You can also read
