ARRCOAT - The future of Indian origin texture paints - A mini-portfolio for a wide variety of the 1st Indian manufactured 'Marble-Powder' ...

ARRCOAT - The future of Indian origin texture paints
A mini-portfolio for a wide variety of the 1st Indian manufactured ‘Marble-Powder’ - Limestone - Real
                                  Sea-Shell Pearl based texture paints

ARRCOAT   A 100% Made in India product.

Reasons why your
next pick should be
ARRCOAT
- Is the first 100% water-proof
product
- The only scratch-resistant texture
paint in the market
- Marble-Powder based texture
paint- which means a greater life,
and to prove that we also give 5
years of warranty.

Technical Spec Sheet

Product Data Sheet Arrcoat Polished Plaster PP100,
PP100, PP101, PP102
Smooth, Pitted, Travertine, Dragged, KonCrete Textured,

1 Product Description
Arrcoat Polished Plaster is a natural mineral material composed of hydrated lime, crushed
marble and cement combined with special additives to control working characteristics.
Although essentially the same composition the four base powders RO1, R02, R03, R40 are
made up from different proportions of white, yellow, red and green crushed marble
powders. This means a range o’ natural stone colored finishes can be achieved without the
addition of any pigment.

2 Properties
      ● Natural mineral material
      ● Contains less VOCs
      ● Powders product unaffected by frost
      ● Pot life 4-6 hours
      ● Wide range of finished achievable
      ● Wide range of colors available
      ● Good workability in a wide range of site conditions
      ● Good water vapor permeability
      ● Completely noncombustible as supplied or when applied
3 Health and Safety
Arrcoat ​Polished Plaster is a powdered product. A dust mask should always be worn when
mixing or handling the product. The product contains hydrated lime and cement that will act
as an irritant. Wear protective clothing, gloves and eye protection. It contact occurs wash
affected areas immediately with soap and water.

4 Suitable Substrates
 ​ rrcoat ​Polished Plaster can be applied to Arrcoat recommended substrates which should
  A
be firm and true and will not crack. In our experience the best substrates to work onto are
taped and jointed plasterboard and freshly plastered walls that are fully dry.

Various Finishes
•   Koncrete

•   Carrara

•   Parline

•   Travertino

•   Pitted

•   Rugged

•   Smoothe

•   Stukko

•   Kanvas

Koncrete
The Archi Concrete finish can be applied on
ceilings and walls easily. ARRCOAT has aced
its formula for creating it with a balanced
formulation and the use of proper inerts and
additives. The cutting-edge finish can be made
use of in new renderings/old plasters; concrete
surfaces; various absorbent mineral substrates;
insulating systems; old paints or dry, compact,
absorbent, mineral coatings and plasterboards.

Carrara
Carrara provides an exquisite silky smooth finish with
a substantial focus on its tonality. This finish has an
inherent method of achieving elegant depth and
bringing out the true vibrancy of its colours. Although,
it is to be noted that the final appearance of this finish
is dependant on the hands of the applicator who
makes it possible to achieve the finishes precise
tonality. The applicator in charge could bring out
anything from a lightly politer surface to a more Multi-
layer effect, depending on the instructions provided.

Parline
Parline’s ‘exquisitely’ and ‘luxuriant’ are two
tremendously elegant finishes with subtle
sparkle or shimmer. This creates visual texture
and directional effects with a low sheen. The
interior surface provides with a wide range of
movable and tonal effects on this finish. This
helps the applicator to create a unique and
visually striking wall coating with a close quartile
yet subtle when viewed from a distance.

Travertino
The Travertino finish has a light texture
and a directional quality similar to that
of a natural travetino stone. The surface
has a sheen to it, and although it is
applied in just one colour, it appears to
have two or more distinct spectrum
tones running through the surface.

Pitted
Pitted is the type of finish which is rugged with a
grainy appearance similar to that of a
kombianiert with a less polished surface. This
helps in creating an appearance and a feel of
honeyed or a lightly poliert limestone. It is most
effective when it is used to creating an
appearance of a monolithic stone surface of a
natural stone block. The Pitted finish is at its very
best when in lighter or natural stone colours.

Rugged
Inspired by the pattern of weatherliness rock,
the rugged finish, is et another ARRCOAT
creation both in technique and in a
specialised set of tools. This creation uses
the same basic ingredients of a pitted finish
and the rugged grainy (semi-polished)
surface which is then characterised by
striations of texture running through the
surface to give a stronger directional quality.

Smoothe
Smoothe, a smooth polished plaster finish is similar to
the marmo plaster which was historically used in
northern Italy during the era of Renaissance as both an
interior and an exterior wall finish. This texture was
widely acclaimed after it was used as a background of
DI-ORNAT Frescoes which, at that time, dominated
much of the decorations. This finish is a combination of
material and techniques widely regarded as Venetian
plaster. It is to be noted here that the final appearance is
to be credited to the hands of the applicator as she/he
could help in achieving a polished surface to even
introducing marmalades effects.

Stukko
Stukko, is a luxurious finish pioneered by the Italians
while they were improvising on the traditional Venetian
technique of applying fine coats over a background of of
semi-dry polish with hot iron mordant. This addition
greatly improved the working characteristics cabling it to
be more successful than its predecessors. Stucco finish
is a unique mix of aged lime powder, micronised marble
powder and specialised additives. This finish has the
highest sheen in comparison with other textures. When
applied in unfragmented fine layers and finished with
trowel polish on a glossy surface, it possesses a
remarkable sheen.

Special Finishes - As per your Imagination / Taste /
Desire

Special Finishes Part 2

Special Finishes Part 3

With a special R&D facility we always aspire to bring
to you what you desire.

We speak beyond just a regular catalogue, we
innovate with our materials to bring out just about
any sort of finish you ask for.

A special mention to our all new product - Floor
Texture Paints - a new concept in the interior world

Textured Flooring   A whole new concept

Thank you for your time

     www.arrcoat.com

 Call now - +91 80766 89488