Bond -1 SF Solvent-Free SE Adhesive - A Breakthrough in Bonding Technology!
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Bond -1 SF ®
Solvent-Free
SE Adhesive
A Breakthrough in
Bonding Technology!Why solvent-free? What
leading
Solvents such as acetone, alcohol, or water, are found in all dentists
bonding agents on the market. These solvents can be inadvertent
contributors to weakened bond strengths and post-operative
are
sensitivity. Bond-1 SF Solvent-Free SE Adhesive helps solve these saying...
common problems and here’s how:
Solution #1
Provide high, consistent bond strengths by
eliminating a step - During routine application
of other bonding agents, an air drying step is
necessary to remove solvents such as water, alcohol, and acetone.
As a result of under drying, and not completely allowing these
solvents to evaporate, residual solvents are left behind, potentially
resulting in weakened, inconsistent bond strengths, and bonding
“Bond-1® SF cuts direct
interface degradation. This factor is especially important to consider
composite placement
as numerous scientific studies have shown that residual water can
time in half and helps
remain in the adhesive layer and lead to “water-treeing.”
eliminate the potential
for post-op sensitivity.”
Solution #2
Protecting against post operative sensitivity Jeff T. Blank,
- Overdrying can lead to post-operative sensi- DMD, PA
tivity by leaving the dentin too dry and exposing
the dentin tubules. Likewise, underdrying can leave residual solvent
in the resin, thus irritating nerves within the dentin tubules. By elimi-
nating the solvents from Bond-1 SF, we have eliminated both the
drying step and the need to worry about these common technique
sensitive issues.
Solution #3
Penetration of dentin without solvents –
In the past, bonding agents needed to contain
solvents in order to effectively penetrate dentin
"Solvent-free adhesives
and enamel and provide a strong bond to tooth structure. Bond-1 SF
like Bond-1® SF, are the
eliminates that need by forming an interactive bond between the
next evolutionary step in
minerals of the tooth structure and resins, without commonly used
adhesive dentistry."
solvents such as water, acetone or alcohol.
Gregori M. Kurtzman,
Solvent-free also means no environmentally harmful solvents!
DDS, MAGD, FPFA,
FACD, DICOIClinicians have been waiting gener
Pentron Clinical is pleased to bring you its latest breakthrough in
bonding technology — Bond-1® SF Solvent-free SE Adhesive!
Bond-1 SF is so unique, it defies the conventional practice of assigning
“generations” to bonding agents. This solvent-free, one-coat, self-etch
adhesive is in a league of its own!
Call it a “generation” if you must, we just call it an extraordinary
addition to our affordable, award-winning line of adhesive products.
The results are in...
Exceptionally High Bond Strength *Bond Strength of Self-Etch Adhesives
25
Bond strengths exhibited by Bond-1® SF Solvent-Free
SE Adhesive are as high as results obtained when
20
using traditional total etch techniques. Validated in a
Strength in MPa
third party study by University of Alabama at Birmingham, 15
Bond-1 SF offers exceptional bond strengths up to
10
30.4 MPa to Dentin. These exceptionally high bond
strengths ensure long lasting, beautiful direct restorations
5
for you and your patients.
0
Dentin Enamel Bond-1™ Clearfil™ Adper™ OneCoat AdheSE ® G-Bond™ 6
SF 1 S 3 Bond 2 Prompt™ Bond 4 One
L-Pop™ 3 Viva-Pen 5
*Bond strength data by W. Jia, S. Jin and J. Turcotte (Pentron Clinical Technologies, LLC, Wallingford CT). Data available upon request. **Microleakage data by J
1. Manufacturer’s published data. 2. Clearfil™ S3 Bond is a trademark of Kuraray Dental. 3. Adper™ Prompt™ L-Pop™ SE Adhesive is a trademark of 3M. 4. O
Posterior restoration using Bond-1 SF Solvent-F ®
1 2
Bo
Preparation of an MOD
app
direct restoration.
tip
secrations for a bonding agent like this!
Available in two convenient delivery options
> Syringe - The syringe offers > Single Dose - This easy to
a unique flocked needle tip use, self-standing delivery
for easy, direct placement option provides the ultimate
onto the prep. Also includes in infection control, as it is a
a smear-free UV coated one-time use only. Separate
label for easy cleaning after applicator brushes are sup-
each use. plied with each single dose.
Low Microleakage **Microleakage of Self-Etch Adhesives
100
In a study performed by John O. Burgess, DDS, MS
penetration ≤ 0.5 of cavity depth
at the University of Alabama-Birmingham, Bond-1® SF
% of Specimens with dye
80
Solvent-Free SE Adhesive showed no significant
difference in microleakage on either dentin or enamel 60
when compared to 4 other leading competitive bonding
40
agents. Low microleakage means good marginal integrity
for all your direct composite restorations, bonded with
20
Bond-1 SF, for years to come.
0
Dentin Enamel Bond-1™ Clearfil™ Adper™ AdheSE ® G-Bond™ 6
SF 1 S 3 Bond 2 Prompt™ One
L-Pop™ 3 Viva-Pen 5
John O. Burgess, University of Alabama-Birmingham. Data available upon request.
OneCoat Bond is a trademark of Coltene/Whaledent. 5. AdheSE® One Viva-Pen is a registered trademark of Ivoclar Vivadent Inc. 6. G-Bond™ is a trademark of GC America Inc.
Free SE Adhesive
3 4
The unique handling
nd-1® SF is being properties allow for easy
plied with the flocked detection on the tooth
and rubbed for 20 after application, for
conds. a consistent bond every
time you use it.Features & Benefits
> Solvent-free – Protects against sensitivity, eliminating > Versatile – Can be used in conjunction with light
common technique-sensitive issues such as under cure and dual-cure materials*
and over drying. Also prevents evaporation.
> Unique handling properties – Enables an even
> No air drying – Saves you precious chair time; spread of the material, ensuring a complete coverage
doesn’t leave you guessing “how dry is too dry” and optimal results
> Self-etch – No need to acid etch, saves time > One coat – Easy to use, reduces procedure time
*Compatible with dual-cure materials only when the initial layer of dual-cure material is light cured.
Just one coat!
Most bonding agents on the market require at least two coats of material in order to obtain optimal results.
Bond-1 SF only requires 1 coat! In just 3 basic* steps you reach optimal bonding results, making this one
of the easiest to use bonding agents on the market. Just apply evenly, rub for 20 seconds, and light cure!
Dip Applicator and Rub for 20 seconds Light cure 10 seconds
spread evenly
*See translated instructions for full product use detail
5
Final direct restoration accom-
plished with the Bond-1® SF
Light cure the bonding Solvent-Free SE Adhesive,
agent for 10 seconds. Artiste® Nano Composite,
Artiste® Maverick™ Tints,
and the Fini® Polishing Disks.
Photography courtesy of Gregori Kurtzman, DDS, MAGD, FPFA, FACD, DICOIBond-1 SF ®
Solvent-Free
SE Adhesive Ordering Information
N03N - Bond-1 SF Solvent-Free SE Adhesive - Syringe
2 – 1ml Syringes
Flocked Needle Tips
Instructions and MSDS
N03M - Bond-1 SF Solvent-Free SE Adhesive - Single Dose
50 – .125ml Single Doses
50 – Disposable Applicators*
Instructions and MSDS
Accessories
N03T 100 – 25 gauge Flocked Needle
N10B 100 – Disposable Applicators*
*Note: Green applicators are only available in Bond-1 SF 50 packs, but are the same
size as Pentron’s Blue Disposable Applicator, REF N10B.
For more information on our entire line of innovative dental products
visit us at www.pentron.com or call us at 1.800.551.0283
53 North Plains Industrial Road | Wallingford, CT 06492
t | 800.551.0283 | 203.265.7397 f | 877.677.8844 w | www.pentron.com
Bond-1® SF | Breeze® | Cement-It® | Lute-It® | Bond-1® | Bond-It® | Nano-Bond®
Copyright © 2009 Pentron Clinical Technologies, LLC
BSFLT_Rev01You can also read
