In-Person Maintenance Training Options
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
In-Person Maintenance
Training Options
Overview
The Altec Service Training Department offers specialized instruction with hands-on and
classroom time for mechanics. The training emphasizes how Altec equipment functions and
how it can be maintained and repaired. Technicians participate in exercises to test, diagnose
and repair unit systems and components.
In-depth training on hydraulic, electrical and PDM is available to give technicians the building
blocks needed to better understand mechanical systems. Unit specific training offers
technicians an overview of internal machine functions. These classes are standardized based
on Altec Maintenance Manuals and cover an introduction to the unit, maintenance safety, unit
operation, preventive maintenance, unit inspection and minor troubleshooting and repairs.
Upon completion of the program, trainees should be able to successfully and efficiently
perform scheduled maintenance on equipment. Before enrolling in unit-specific training,
Altec recommends technicians attend Altec Customer Boot Camp, enroll in Altec online
maintenance training or otherwise have a basic aptitude of electrical and mechanical systems.
Fluid Power Society (FPS) review and test preparation sessions are also offered by Altec to give
mechanics and technicians the ability to earn FPS Mobile Hydraulic Mechanic certifications.
C A L L : ( 8 1 6 ) 9 0 1 - 4 8 9 4 O R E M A I L T E C H N I C A LT R A I N I N G @ A LT E C . C O M TO S C H E D U L E T R A I N I N G.
2023 IN-PERSON SCHEDULE
MAINTENANCE TRAINING
Altec provides basic and unit specific training for associates and customers throughout the
year. To sign-up or learn more about any of the available courses, contact Technical Training
at: technicaltraining@altec.com or call (816) 901-4894.
Training Date Location
10 Year Crane Teardown March 20-24 Plains, PA
AA/AN/AN-OC January 26-27 Kansas City, MO
AA/AN/AN-OC March 28-29 Mt.Airy, NC
AA/AN/AN-OC May 23-24 St. Joseph, MO
AA/AN/AN-OC June 6-7 Aurora, CO
AA/AN/AN-OC August 1-2 Frederick, MD
AA/AN/AN-OC September 12-13 Kansas City, MO
AA/AN/AN-OC October 31-November 1 Waxahachie, TX
AA/AN/AN-OC December 12-13 Indianapolis, IN
AH125 April 25-27 Duluth, MN
AH125 July 18-20 Duluth, MN
AH125 September 19-21 Duluth, MN
AH75/85/100B June 6-8 Duluth, MN
AH75/85/100B August 8-10 Duluth, MN
AH75/85/100B October 17-19 Duluth, MN
AM50/55/60 January 24-25 Kansas City, MO
AM50/55/60 March 21-22 Birmingham, AL
AM50/55/60 May 9-10 Neenah, WI
AM50/55/60 September 26-27 Mt.Airy, NC
AM50/55/60 November 28-29 St. Joseph, MO
AT200A/235 June 8th Aurora, CO
AT30/35/37G May 11th Neenah, WI
IN-PERSON SCHEDULE 1 OF 4
2023 IN-PERSON SCHEDULE
MAINTENANCE TRAINING
Training Date Location
Crane School 1 January 9-13 Daleville, VA
Crane School 1 March 6-10 Daleville, VA
Crane School 1 May 1-5 Daleville, VA
Crane School 1 July 17-21 Daleville, VA
Crane School 1 September 18-22 Daleville, VA
Crane School 1 November 6-10 Daleville, VA
Crane School 2 February 7-10 Daleville, VA
Crane School 2 April 25-28 Daleville, VA
Crane School 2 June 20-23 Daleville, VA
Crane School 2 August 22-25 Daleville, VA
Crane School 2 October 17-20 Daleville, VA
Crane School 2 December 5-8 Daleville, VA
Customer Boot Camp February 14-17 St. Joseph, MO
Customer Boot Camp May 16-19 Birmingham, AL
Customer Boot Camp August 15-18 St. Joseph, MO
Customer Boot Camp November 7-10 Birmingham, AL
Derrick School 1 January 10-13 Riviera Beach, FL
Derrick School 1 February 20-23 Birmingham, AL
Derrick School 1 March 20-23 Salt Lake City, UT
Derrick School 1 April 11-14 Kansas City, MO
Derrick School 1 May 16-19 Grayslake, IL
Derrick School 1 June 20-23 Mt.Airy, NC
Derrick School 1 July 18-21 Kansas City, MO
Derrick School 1 August 22-25 Neenah, WI
Derrick School 1 September 19-22 Kansas City, MO
Derrick School 1 October 17-20 Aurora, CO
Derrick School 1 November 7-10 Riviera Beach, FL
Derrick School 1 December 5-8 Waxahachie, TX
Derrick School 2 February 7-9 Birmingham, AL
Derrick School 2 April 18-20 Indianapolis, IN
Derrick School 2 August 29-31 Aurora, CO
Derrick School 2 October 3-5 Syracuse, NY
Derrick School 2 December 12-14 St. Joseph, MO
IN-PERSON SCHEDULE 2 OF 4
2023 IN-PERSON SCHEDULE
MAINTENANCE TRAINING
Training Date Location
E-Series Derricks January 17-18 Mt.Airy, NC
E-Series Derricks April 25-26 Birmingham, AL
E-Series Derricks August 29-30 Indianapolis, IN
E-Series Derricks November 14-15 Dixon, CA
FPS January 23-27 Waxahachie, TX
FPS February 13-17 Riviera Beach, FL
FPS February 27-March 3 St. Joseph, MO
FPS March 13-17 Neenah, WI
FPS March 27-31 Grayslake, IL
FPS April 17-21 Tampa, FL
FPS May 1-5 Portland, OR
FPS May 15-19 St. Joseph, MO
FPS June 5-9 Indianapolis, IN
FPS June 19-23 Syracuse, NY
FPS July 10-14 Aurora, CO
FPS July 24-28 Salt Lake City, UT
FPS August 7-11 Birmingham, AL
FPS August 21-25 Dixon, CA
FPS September 11-15 Mt.Airy, NC
FPS September 25-29 Ashland, OH
FPS October 9-13 Plains, PA
FPS October 23-27 Kent, WA
FPS November 6-10 St. Joseph, MO
FPS December 4-8 Tampa, FL
FPS December 11-15 Birmingham, AL
IN-PERSON SCHEDULE 3 OF 4
2023 IN-PERSON SCHEDULE
MAINTENANCE TRAINING
Training Date Location
LRV/LR7/LR8 March 30th Mt.Airy, NC
LRV/LR7/LR8 November 2nd Waxahachie, TX
PDM January 24-25 St. Joseph, MO
PDM March 14-15 Waxahachie, TX
PDM May 2-3 Grayslake, IL
PDM July 11-12 Kent, WA
PDM September 19-20 Birmingham, AL
PDM November 28-29 Riviera Beach, FL
IN-PERSON SCHEDULE 4 OF 4Virtual Maintenance
Training Options
Overview
Interactive maintenance training webinars and eCourses are available to help technicians learn
virtually about preventive maintenance, hydraulic, electrical, and mechanical systems, and
troubleshooting processes. After signing up, participants can access their upcoming courses,
completed courses, and training records.
Interactive Webinars eCourses
Interactive webinars are facilitated using the eCourses allow learners to navigate through
Microsoft Teams webinar platform, virtual unit systems and components at their own
learning tools, handouts and real-time pace 24/7.
instruction. Interactivity and participation are
included and encouraged throughout.
Sign Up
Select from the virtual training options and contact us to sign up.
Email: technicaltraining@altec.com or call (816) 901-4894 to learn more, schedule training or
request training cost estimates.
F O R I N F O R M AT I O N O N A LT E C P R O D U C T S A N D S E R V I C E S : V I S I T U S AT W W W. A LT E C . C O M2023 INTERACTIVE WEBINARS
MAINTENANCE TRAINING
The 60-minute interactive webinar sessions are facilitated using the Microsoft
Teams platform, virtual learning tools, handouts and real-time instruction. These
webinars are great as introductory training for new hires, or as refresher training
throughout the year. Courses are $125 per participant link. Hydraulic Symbols
is $75 per participant link.
After registering, you should recieve an email. You will be able to access the webinar at the
scheduled time by clicking on the Microsoft Teams Meeting link in your email. We recommend
logging in a few minutes early, as we will open the meeting 10 minutes before the start time to
get everyone used to interacting with the virtual tools.
Frequently Asked Questions
Q What am I expected to do during Q Do I have to take webinars in series
this training? order? For example, can I take
Hydraulic 3 before Hydraulic 1?
A You will be asked to engage with the
course content and the trainer throughout A It’s highly recommended that you take
the session. This is done using audio, courses in series order because the
webcam, chat, polls, whiteboards, and courses are designed to build on
other virtual tools. There is also time at each other.
the end for questions and answers.
Q Can I request a webinar for just
Q What software do I need? my technicians?
A We use the Microsoft Teams webinar A Absolutely. We set aside time slots for
platform. When you click on the link customer requests throughout the year.
to join the webinar, you will be given Currently, we are limiting requests to the
the option to join the meeting from the list of available course offerings and are
Microsoft Teams application, or from your working to expand that list. Cost is $125
internet browser. For the best experience, per participant for a 60-minute session.
we recommend downloading the Windows A minimum of six people need to attend.
application. However, you can attend The recommended maximum class size is
without downloading or installing by 20 participants.
clicking “continue on this browser” after
the prompt. Q How do I sign up for the webinars?
Q What equipment will I need? A You can sign up for individual webinars
or a webinar series and other courses
A You will need a computer or electronic by contacting the Altec Technical
device with a stable internet connection, Training Department by email at
a webcam (usually built into the device), technicaltraining@altec.com or by calling
and a headset (or headphones with a (816) 901-4894.
microphone on it).
F O R I N F O R M AT I O N O N A LT E C P R O D U C T S A N D S E R V I C E S : V I S I T U S AT W W W. A LT E C . C O M2023 INTERACTIVE WEBINARS
MAINTENANCE TRAINING
MAINTENANCE WEBINARS UNIT SPECIFIC WEBINARS (NEW)
The 60-minute interactive webinar sessions Course length varies based on unit
are facilitated using the Microsoft Teams complexity. These interactive unit specific
platform, virtual learning tools, handouts courses have been tailored to be facilitated
and real-time instruction. These webinars are using the Microsoft Teams platform,
great as introductory training for new hires, handouts and real-time instruction. Cost
or as refresher training throughout the year. varies based on course length. Contact the
Technicians can participate in a learning Altec Technical Training Department by email
path or select individual courses from the at technicaltraining@altec.com or by calling
maintenance training webinar schedule. (816) 901-4894 to learn more or to schedule
EXTENSIVE WEBINAR SERIES a virtual training.
Monday (All times list Central Time.)
8:30 a.m. Preventive Maintenance 1 JEMS S (4 hours)
10 a.m. Hydraulic Symbols This virtual training is divided into three
BREAK parts. Participants will determine how to
12:30 p.m. Hydraulics 1 safely operate and troubleshoot the system,
2 p.m. Electrical 1 recognize individual components and explore
Tuesday circuits.
8:30 a.m. Preventive Maintenance 2
10 a.m. Preventive Maintenance 3 JEMS SE (4 hours)
BREAK This virtual training is divided into three
12:30 p.m. Hydraulics 2 parts. Participants will determine how to
2 p.m. Electrical 2 safely operate and troubleshoot the system,
Wednesday recognize individual components and explore
8:30 a.m. Hydraulics 3 circuits.
10 a.m. Electrical 3
BREAK
12:30 p.m. Power Distribution Module (PDM)
2 p.m. Controller Area Network (CAN)
Thursday
8:30 a.m. AXIS
10 a.m. Reading Hydraulic Schematics
BREAK
12:30 p.m. Reading Electrical Schematics
2023 SESSIONS
JANUARY 9-12 | MARCH 20-23| APRIL 3-6 | Sign Up
MAY 22-25 | JUNE 5-8 | JULY 10-13 | Tel: 816.901.4894
AUGUST 21-24 | OCTOBER 9-12 | Email: technicaltraining@altec.com
NOVEMBER 13-16 | DECEMBER 11-142023 INTERACTIVE WEBINARS
MAINTENANCE TRAINING
Course Date Time (CT)
January 9, 2023
March 20, 2023
Preventive Maintenance 1 April 3, 2023
Participants will identify sections
of the Altec Maintenance Manual, May 22, 2023
discuss how to conduct a preventive June 5, 2023
maintenance inspection, use the 8:30 a.m. (CT)
Preventive Maintenance Checklist July 10, 2023
to determine when to replace filters August 21, 2023
and use charts for inspection pro-
cesses and procedures. October 9, 2023
November 13, 2023
December 11, 2023
January 10, 2023
March 21, 2023
April 4, 2023
Preventive Maintenance 2 May 23, 2023
Participants will identify proper
June 6, 2023
torquing procedures, determine 8:30 a.m. (CT)
when to perform turntable tilt, HOP, July 11, 2023
side load test inspections and how
to identify basic testing procedures. August 22, 2023
October 10, 2023
November 14, 2023
December 12, 2023
January 10, 2023
March 21, 2023
April 4, 2023
Preventive Maintenance 3
May 23, 2023
Participants will discuss hydraulic June 6, 2023
system pressure checks, the 10 a.m. (CT)
July 11, 2023
rotation bearing and gearbox,
structural tests, manual stowage August 22, 2023
and atmospheric vent testing.
October 10, 2023
November 14, 2023
December 12, 2023
WEBINAR SCHEDULE 1 OF 52023 INTERACTIVE WEBINARS
MAINTENANCE TRAINING
Course Date Time (CT)
January 9, 2023
March 20, 2023
April 3, 2023
Introduction to May 22, 2023
Hydraulic Symbols June 5, 2023
Participants will break down 10 a.m. (CT)
July 10, 2023
individual symbol components and
identify symbols in a schematic. August 21, 2023
October 9, 2023
November 13, 2023
December 11, 2023
January 9, 2023
March 20, 2023
Hydraulics 1 April 3, 2023
Participants will use the basic May 22, 2023
principles Participants will use the
basic principles of fluid power to June 5, 2023
12:30 p.m. (CT)
answer questions, describe prop- July 10, 2023
erties of hydraulic fluids and rec-
August 21, 2023
ognize corresponding symbols for
components. October 9, 2023
November 13, 2023
December 11, 2023
January 10, 2023
March 21, 2023
April 4, 2023
Hydraulics 2 May 23, 2023
Participants will recognize damaging ef-
fects of contamination and improper fluid June 6, 2023
in a hydraulic system, determine the prop- 12:30 p.m. (CT)
er procedure for taking a hydraulic fluid July 11, 2023
sample and identify where to find specifica-
August 22, 2023
tion for fluid conductors.
October 10, 2023
November 14, 2023
December 12, 2023
WEBINAR SCHEDULE 2 OF 52023 INTERACTIVE WEBINARS
MAINTENANCE TRAINING
Course Date Time (CT)
January 11, 2023
March 22, 2023
April 5, 2023
May 24, 2023
Hydraulics 3
Participants will identify hydraulic symbols June 7, 2023
for valves, determine valve placement in a 8:30 a.m. (CT)
system and identify internal valve compo- July 12, 2023
nents and types of flow controls.
August 23, 2023
October 11, 2023
November 15, 2023
December 13, 2023
January 12, 2023
March 23, 2023
April 6, 2023
May 25, 2023
Reading Hydraulic Schematics
Using schematics, participants will trace June 8, 2023
the flow of hydraulic oil through an electric 10 a.m. (CT)
over hydraulic system and troubleshoot a July 13, 2023
given scenario.
August 24, 2023
October 12, 2023
November 16, 2023
December 14, 2023
January 9, 2023
March 20, 2023
April 3, 2023
Basic Electrical 1
Participants will define basic electrical May 22, 2023
concepts, examine Ohm’s Law, discuss
the importance of electrical safety, and June 5, 2023
describe series and parallel circuits. They 2 p.m. (CT)
will also determine correct lead placement July 10, 2023
on the DVOM to test voltage, resistance
and current and determine where to place August 21, 2023
leads when testing.
October 9, 2023
November 13, 2023
December 11, 2023
WEBINAR SCHEDULE 3 OF 52023 INTERACTIVE WEBINARS
MAINTENANCE TRAINING
Course Date Time (CT)
January 10, 2023
March 21, 2023
April 4, 2023
Basic Electrical 2 May 23, 2023
Participants will recall potential safety con-
cerns when dealing with electrical circuits
June 6, 2023
2 p.m. (CT)
and components, identify electrical com- July 11, 2023
ponents by their symbols and trace flow
through an electrical circuit. August 22, 2023
October 10, 2023
November 14, 2023
December 12, 2023
January 11, 2023
March 22, 2023
April 5, 2023
Basic Electrical 3 May 24, 2023
Participants will identify components on
electrical schematics, discuss types of June 7, 2023
chassis/machine interfaces and will dis- 10 a.m. (CT)
cuss the outrigger interlock system, elec- July 12, 2023
trical control systems and basic electrical
August 23, 2023
diagnostics.
October 11, 2023
November 15, 2023
December 13, 2023
January 12, 2023
March 23, 2023
April 6, 2023
May 25, 2023
Reading Electrical Schematics June 8, 2023
Using schematics, participants will trace
12:30 p.m. (CT)
the flow of electrons through an electric July 13, 2023
circuit and troubleshoot a given scenario.
August 24, 2023
October 12, 2023
November 16, 2023
December 14, 2023
WEBINAR SCHEDULE 4 OF 52023 INTERACTIVE WEBINARS
MAINTENANCE TRAINING
Course Date Time (CT)
January 11, 2023
March 22, 2023
April 5, 2023
Controller Area Network 1 (CAN) May 24, 2023
Participants will identify types of
chassis machine interfaces, how to June 7, 2023 2 p.m. (CT)
locate parameters on schematics July 12, 2023
and discuss how to isolate a fault in
a circuit. August 23, 2023
October 11, 2023
November 15, 2023
December 13, 2023
January 11, 2023
March 22, 2023
April 5, 2023
May 24, 2023
Power Distribution Model (PDM)
Participants will discuss safety procedures June 7, 2023
and where to locate the PDM, identify com- 12:30 p.m. (CT)
ponents within the PDM and identify PDM July 12, 2023
circuitry.
August 23, 2023
October 11, 2023
November 15, 2023
December 13, 2023
January 12, 2023
March 23, 2023
April 6, 2023
May 25, 2023
AXIS June 8, 2023
Participants will discuss the benefits of
8:30 a.m. (CT)
the AXIS tool, navigation, credentials, and July 13, 2023
inputs and outputs.
August 24, 2023
October 12, 2023
November 16, 2023
December 14, 2023
WEBINAR SCHEDULE 5 OF 5MAINTENANCE ECOURSES
SELF-PACED VIRTUAL TRAINING
Introductory Level eCourses eCourse units available:
Self-paced (1 hour) AA/AN/AN-OC
AM50/55/60
Introductory maintenance eCourses are
AT200A
available for some Altec units. Each course
can be completed in approximately one hour AT30-G/AT35-G/AT37-G
at the learner’s convenience and pace. The AT40-G
courses allow learners to navigate through AT235P
unit systems and components to better A-T40C
understand inspections and repairs. These D2000B/3000B/4000B
introductory courses are a good starting DLB/DMB
point for technicians who are unfamiliar with DT80
a specific Altec unit and can serve as solid
T40P
preparation for the live, unit specific trainings.
TA50/55/60
Unit Specific eCourses are $150/per user.
Course Content
Unit specifications To enroll contact the Altec Technical Training
Safety by email at technicaltraining@altec.com or
Preventive maintenance and inspection call (816) 901-4894.
Hydraulic system(s)
Mechanical system(s)
Electrical system(s)
Troubleshooting
F O R I N F O R M AT I O N O N A LT E C P R O D U C T S A N D S E R V I C E S : V I S I T U S AT W W W. A LT E C . C O MVIRTUAL TRAINING REQUEST FORM
TECHNICALTRAINING@ALTEC.COM
To sign up for Maintenance Interactive Webinars or eCourses please provide the following
information and email this form to technicaltraining@altec.com. Submitting this form does
not automatically reserve a seat. You will receive confirmation after submission. Enrollment
closes a day prior the scheduled webinar sessions.
General Information Course Information
Company Name: Course title(s) and Session Date(s):
Example: Preventive Maintenance Series, August 13.
Billing Address:
PO:
Contact Information
Name:
Number of participant links per course (1-20):
Phone:
Participant name(s) and email(s):
Email: Example: Firstname Lastname, address@email.com;
Comments:
If you have any questions contact Technical Training by email at technicaltraining@altec.com
or call the Technical Training Department at (816) 901-4894.
*Altec Service does not provide training to third-party service providers.
F O R I N F O R M AT I O N O N A LT E C P R O D U C T S A N D S E R V I C E S : V I S I T U S AT W W W. A LT E C . C O MYou can also read
