PARIS AIR SHOW 2019 17-23|06|19 - LE BOURGET HALL 2B - Hamburg Aviation
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
PARIS AIR SHOW 2019 LE BOURGET ➜ HALL 2B 17-23|06|19
PARIS AIR SHOW 2019
LE BOURGET ➜ HALL 2B
17-23|06|19WALLONIA EXPORT-
INVESTMENT AGENCY
Place Sainctelette, 2
1080 BRUSSELS
Tel.: +32 2 421 82 11
E-mail: info@awex.be
Website: www.awex-export.be
www.investinwallonia.be
www.wallonia.be
> Mrs Pascale DELCOMMINETTE, CEO
Mrs Chantal DEBLEU, General Manager
Mrs Violaine BARTHELEMY, Area Manager France and GD of Luxemburg
AWEX, partner of the international economic • Organisation of commercial canvassing opera-
development of Wallonia. tions (participation in international shows, or-
The Wallonia Export-Investment Agency (AWEX) is ganisation of economic missions, sector-based
in charge of the development and management of contact days, etc.);
Wallonia’s international economic relations. • Contacts with international organisations;
• Promotion of Wallonia and its export potential;
With regards to foreign trade, the Agency has a • Financial support and funding for exports;
promotion and information mission with regard to • Training and raising awareness of international
both the international and Walloon business com- professions.
munity.
Intended for purchasers, decision-makers, im-
porters and foreign prospects, the Agency can, on With regards to foreign investment, the Agency
request: provides general expertise in the areas of promo-
• pass on economic data regarding Wallonia and tion, prospecting and informing potential investors.
its export potential; It also ensures active monitoring of investors based
• provide information on the products and ser- in Wallonia, as well a mission to find foreign buy-
vices of Walloon businesses; ers for Walloon industrial sites in the process of
• seek Walloon businesses for the conclusion of restructuring.
international partnerships;
• distribute lists of Walloon exporters. AWEX is also competent for the strengthening of
the Wallonia brand image overseas.
Vis-a-vis Walloon businesses, the Agency is their AWEX has a workforce of more than 400 people
comprehensive international partner, providing a and about one hundred offices overseas.
range of services and activities covering the entire
export process:
• General and commercial information on for-
eign markets;
• Production of individual market studies on re-
quest;
BELGIAN AEROSPACE | At the PARIS AIR SHOW 2019SKYWIN Chemin du Stocquoy,3 1300 WAVRE Tel.: +32 10 47 19 44 E-mail: info@skywin.be Website: www.skywin.be Twitter: @PoleSkywin > Jacques SMAL, Chairman Michel STASSART, Deputy Director, Etienne POURBAIX, Managing Director Space Programs Jean-Jacques WESTHOF, Secretary-General Claudine BON, Deputy Director, David PRAET, Deputy Director, International Projects & Training Relations Pierre-Jean FONDU, Project Manager Skywin Wallonie is the Aerospace cluster of the Wallonia Region of Belgium. Skywin gathers a group of companies, training centers and research units engaged in public and private partnership and building synergies around common and innovative projects in the Walloon re- gion of Belgium. Skywin is focused around 5 sec- tors and 6 technological axes. Skywin has 148 members among which: • 115 Companies: SMEs (84) and large compa- nies (31) • 25 Research operators • 2 Training centers • 6 Other bodies (agencies, associations...) FIGURES FOR THE SECTOR IN WALLONIA Turnover of the sector: €1.75 billion; Employment figures: 7.500 direct jobs. 17-23|06|20193
EXHIBITORS - WALLONIA • ADVANCED COATING • MATERIA NOVA • AERODROME DE NAMUR • MECASPRING • ALX SYSTEMS • MOCKEL • AMIA SYSTEMS • NOLISYS • AMOS • NUMECA - NUMFLO • ANTICIP CONSULT • OPTIMAL AIRCRAFT DESIGN • ANY SHAPE • OPEN ENGINEERING • B-LiFE • PIRON PEINTURES INDUSTRIELLES • BELGIAN ENGINE COMPANY (BEC) • PRECIMETAL PRECISION CASTINGS • BRIDGESTONE AIRCRAFT TIRE EMEA • ROVI-TECH • BRITTE-MUSTAD • SABCA • CAPAUL • SAFRAN AERO BOOSTERS • CENAERO • SENSY LOAD CELLS • CENTRE SPATIAL DE LIEGE • SIMA • CITIUS ENGINEERING • SOBELCOMP • COEXPAIR • SONACA • DEDECKER PRECISION MECHANICS • SPACEBEL • DELTATEC • TECHNICAL AIRBORNE COMPONENTS • DESIMONE • TECNOLON WORKS • DUMOULIN AERO • THALES ALENIA SPACE • FERONYL • THALES BELGIUM • FN HERSTAL • V2I • GDTech • VANHULEN HIGH PRECISION SPRINGS • GRIMONPREZ TRANSMISSION GEARS • VITROCISET BELGIUM • JDC INNOVATION • WALLONIE AEROTRAINING NETWORK • LA NITRURATION MODERNE (WAN) • LESCAV AERO BELGIAN AEROSPACE | At the PARIS AIR SHOW 2019
ADVANCED COATING
Rue de l’Avouerie, 7
4000 LIEGE
Tel.: +32 4 254 50 11
E-mail: info@advanced-coating.com
Website: www.advanced-coating.com
> Thierry TETE, Commercial
Mobile: +33 6 27 85 63 24
E-mail: th.tete@advanced-coating.com
COMPANY BACKGROUND MAIN REFERENCES
VAdvanced Coating designs, develops and applies AIRBUS INDUSTRIE – EUROCOPTER –
arc, cold, plasma and supersonic spraying of met- FORGES DE BOLOGNE – LIEBHERR AEROS-
als, alloys, ceramics and carbides on all kinds and PACE – SAFRAN AERO BOOSTERS – SERTA –
sizes of machine parts. SNECMA – SONACA - …
Advanced Coating is a specialist in flat and cylin-
drical grinding as well as super finishing and bal-
ancing of parts.
CERTIFICATION
COATING SPECIFICATION ISO 9001 - ISO 14001 -EN 9100 -NADCAP
• Wear-resistant coatings Laboratory certified by SAFRAN
• Thermal barrier coatings
• Surface with low or high friction rates
• Non-stick coating
MEASUREMENT PRODUCTS
Sales and After-Sales Service: Galvalibs ®
Rollprof: roll profile measurement inside your ma-
chine
Pénétrascope: vickers hardness measurement
Occhio 500 Nano®: shape and size of particles
17-23|06|20195AERODROME DE NAMUR
Rue Capitaine Aviateur Jacquet, 44
5020 NAMUR
Tel.: +32 81 55 93 50
E-mail: info@aerodromedenamur.be
Website: www.aerodromedenamur.be
Facebook: @Temploux
> Benjamin DE BROQUEVILLE, CEO
Tel.: +32 81 55 93 59
Mobile: +32 476 81 67 00
E-mail: benjamin@aerodromedenamur.be
COMPANY BACKGROUND RANGE OF PRODUCTS
The airfield of Namur is situated in the center of the We have planes, helicopters, paradroping, drones,
Belgium. Near the principal highway of the coun- gliders. We rent spaces for companies. We can
try, we have a new asphalt runway of 690 meters build some hangar or offices.
with new fuel stations (Avgas, UL91 and JetA1).
Our objective is to become a new attractive pole MAIN REFERENCES
of aeronautic. We have space and offices capable
We have just finish to build a 2.300 square meters
to welcome companies based in the aeronautic
hangars for Sonaca Aircracft. They assemble the
segment. We have planes, helicopters, gliders,
S200 at the “Aerodrome de Namur”.
paradrop and drones flying on our site.
ADDED VALUE
We are in the center of the Belgium. We have space
and we are just at 10 minutes from the center of
Namur, the capital of Wallonia.
BELGIAN AEROSPACE | At the PARIS AIR SHOW 2019ALX SYSTEMS
Rue de la Brasserie, 8
4000 LIEGE
Mobile: +32 473 52 30 20
E-mail: sales@alxsys.com
Website: www.alxsys.com
Facebook: @alxsystem
> Stefan PAUWELS, Business Developer Manager
Mobile: +32 475 60 50 37
E-mail: pauwels@alxsys.com
COMPANY BACKGROUND RANGE OF PRODUCTS
ALX Systems provides solution to make UAVs au- • ALX OS: the complete suite to make UAVs au-
tonomous, by enabling AI onboard. tonomous, including GCS, drone control board
UAVs becomes able to swarm, avoid obstacles, and server system
proceed to live recognition, 3D reconstruction, • ALX PHYSICS: the simulation solution, dedi-
GPS denied flight. Securely connected to the cloud cated to validate business application scena-
or private premises, the system allows a complete rios.
fleet management. • ALX VISION SUITE: the suite dedicated to en-
able deep learning embedded on UAVs, train
ALX also provides an advanced simulation system, neural network, backtest strategies
deep learning training tools, and vision algorithms • ALX SPARTIATH: The application to protect
against drone intrusion
ADDED VALUE
Our added value for manufacturer is to provide a MAIN REFERENCES
complete operating system or some technological Sony, NATO, DGA, CMI Defence, John Deere, etc.
blocks to make help them dealing with the intelli-
gence on UAVs.
Our added value for end users is to provide quickly
reliable missions customized for their own busi-
ness by removing all the technological risk due to
UAV use
17-23|06|20197AMIA SYSTEMS I-Tech Incubator Rue Auguste Piccard, 48 Bte 31 6041 GOSSELIES Tel.: +32 2 233 81 46 E-mail: info@amia-systems.com Website: www.amia-systems.com > Emmanuelle VIN, CEO Tel.: +32 2 233 81 46 Mobile: +32 479 727 905 E-mail: evin@amia-systems.com COMPANY BACKGROUND RANGE OF PRODUCTS AMIA Systems is an Operational Excellence com- SIMOGGA Layout Design to optimize flows (move, pany developing its own software, SIMOGGA, to reorganization, investment) by building layout sce- visualize, quantify and optimize the operations of narios ; SIMOGGA Planner to simulate, plan and Production/Maintenance plants and Warehouses. schedule (finite capacity) resources and identi- We challenge our customers to think out of the box fy/remove bottlenecks ; SIMOGGA Analytics for and we bring our solutions to make them autono- warehouses to visualize and improve your storage mous in their transformation. (flows, efficiency, arduousness) ADDED VALUE MAIN REFERENCES Your goals through our solutions? Remove the ASCO, SONACA, Thales, FN Herstal, Exxelia, complexity of the analysis; Compare the “What-If” SNCB, DAF Trucks, NLMK, Unilin, TI Automotive, scenarios and anticipate the variability; Accelerate Druart (CFE), Farnell, TDWilliamson, Twin Disc the decision process with simple and understand- ing visuals; Collaborate and involve your teams to CERTIFICATION facilitate the change management; propose a com- Lean Six Sigma Black Belt plete toolbox to suit the different ways of working and encourage ideation. BELGIAN AEROSPACE | At the PARIS AIR SHOW 2019
AMOS
Rue des Chasseurs Ardennais, 2
4031 ANGLEUR
Tel.: +32 4 361 40 40
Mobile: +32 474 90 84 66
E-mail: aurore.carpentier@amos.be
Website: www.amos.be
> Xavier VERIANS, Business Development Director
Tel.: +32 4 361 40 40
Mobile: +32 495 145 165
E-mail: xavier.verians@amos.be
COMPANY BACKGROUND RANGE OF PRODUCTS
Located in Belgium, AMOS has been designing Professional Astronomy Systems: turn-key tele-
and building high-precision optical and mechan- scopes, telescope subsytems, telescope instru-
ical equipment for more than 35 years. Its main ments
achievements are professional telescopes, space Space Systems: on-board hardware, optical and
optical systems, test equipment for space instru- mechanical test systems (GSE), handling systems
ments, and high-precision mechanical equipment.
It employs about 100 employees highly skilled in Science and Industry Solutions: optical and me-
advanced technologies and offers services to the chanical systems
space industry, to the professional astronomy sec- Services: Design, engineering, manufacturing and
tor, to scientific laboratories and to industry. test services in optics, mechanics and mechatron-
ics.
ADDED VALUE
AMOS’ added value recognized by its customers is: MAIN REFERENCES
• Cutting-edge expertise in optics and high-pre- AMOS has customers in Europe (ESA, ESO,
cision mechanics, AIRBUS DEFENCE & SPACE, THALES ALENIA
• Ability to reach the technology limits despite SPACE, OHB), in United States (AURA), in India
difficulties, (ISRO, PRL, ARIES), and has more recently ex-
• High quality thanks to in-house manufactu- panded its business in countries like China, Turkey
ring, and Russia.
• Precise and reliable solutions for long-term
use. CERTIFICATION
ISO 9001:2015
17-23|06|20199ANTICIP CONSULT
Chaply, 1
4140 SPRIMONT
Tel.: +32 4 380 55 67
E-mail: info@anticipconsult.eu
Website: www.anticipconsult.eu
> Valérie DUSSART, General Director
Mobile: +32 4 474 10 66 96
E-mail: vdussart@anticipconsult.eu
COMPANY BACKGROUND RANGE OF PRODUCTS
Anticip Consult is a private company run by a mul- Coaching – Training – Audit for aerospace indus-
ti-disciplinary team of consultants and engineers. try and service: quality management systems (EN
Our consultants have acquired a strong experience 9100 serie), performance improvement, suppliers
in aerospace supply chain and accompanied num- management and associated support in health and
bers of companies to lead different project: pro- safety, and environment.
cess optimisation, certification as well as quality
and on time delivery performances improvement. MAIN REFERENCES
400 companies coached and trained for their man-
ADDED VALUE agement systems and quality assurance, including
Keep it simple and efficient! 50 companies in the aerospace field.
Do your clients have high quality requirements?
Anticip Consult accompany your business on the
CERTIFICATION
way to become more efficient and satisfy your ISO 9001:2015
more demanding customers. Anticip Consult pro- IAQG certified EN 9100 auditor
vides long-term, flexible and efficient solutions to
the benefits of your company, for today and for the
future.
BELGIAN AEROSPACE | At the PARIS AIR SHOW 2019ANY-SHAPE
Rue de la Digue, 37
4400 FLEMALLE
Tel: +32 4 223 00 95
E-mail: info@any-shape.com
Website: www.any-shape.com
> Roger COCLE, CEO
Mobile: +32 476 95 43 27
E-mail: roger.cocle@any-shape.com
COMPANY BACKGROUND ding our customers with the best quality stan-
dards is our main concern as a way to favour
Any-Shape is a company dedicated to Additive
the rapid introduction of 3D printed parts in
Technologies (3D printing) for Industry with state-
highly demanding industrial applications. Any-
of-the-art equipments for the production of metal,
Shape is fully equipped with metallography
plastic and composites industrial parts. Any-Shape
and metrology labs aiming at qualifying the
helps every day companies in the use of additive
mechanical properties of the parts produced
technologies to contribute to the development of
or developing the process parameters for new
their innovative products. Our ambition is to be a
materials. Detailed on-line and a posteriori
leading industrial actor in Europe and beyond by
process control is performed in parallel to rigo-
providing our customers with the whole value chain
rous part quality assessment.
in Additive Manufacturing (AM), with a specific fo-
cus on Design for AM, Process Customization and
Quality Assessment.
RANGE OF PRODUCTS
From prototypes to serial production of metal, plas-
ADDED VALUE tic and composites parts.
Any-Shape competitive assets are based on three Metallic materials available: Aluminium (AS10
main pillars: & AS7), Scalmalloy (Airbus qualified), Titanium
• Engineering, co-conception & design for ad- (TA6V), Stainless steel (316L,…), Inconel
ditive manufacturing: Any-Shape provides (In718,…), Maraging steel (MS1), …
its customers with a professional support to Plastic materials available: Polyamide (PA11,
exploit the full possibilities of industrial 3D PA12, PA6,…), Aluminium filled polyamide
printing while properly accounting for manu- (Alumide), Glass bead filled polyamide (GFPA),
facturing constraints from the concept to the Flame retardant polyamide (FRPA), TPU, ABS-like
detailed design phase. plastics,…
• Metal, plastic and composites parts serial
Composites materials available: Nylon 6 matrix
production: Any-Shape manufactures high
reinforced with continuous carbon, kevlar or glass
value parts in both plastic & metal for highly
fibers.
competitive industries. Consistent state-of-the-
art technologies are available: Selective Laser MAIN REFERENCES
Melting (SLM) for metal powders, Selective
Laser Sintering (SLS) for polyamide powders, AIRBUS DEFENSE & SPACE, SAFRAN (sever-
Multi-Jet Printing (MJP) for high-definition al subsidies), THALES, SONACA, ASCO, ESA,
ABS-like plastic production and Fused Depo- BRIDGESTONE AIRCRAFT, CMI, PSA, DAIMLER,
sition Modeling (FDM) for high performance VOLVO, VALEO, SOLVAY, etc.
polymers and continuous fiber reinforced
composites. CERTIFICATION
• Control, Test and Quality assessment: Provi- EN9100
17-23|06|201911B-LiFE
Clos Chapelle-aux-Champs, 30 bte 24
1200 BRUSSELS
Tel.: +32 2 764 31 76
E-mail: roland.gueubel@uclouvain.be
Website: https://business.esa.int/projects/b-life
> Roland GUEUBEL, B-LiFE Director
Tel.: +32 2 764 31 76
E-mail: roland.gueubel@uclouvain.be
COMPANY BACKGROUND RANGE OF PRODUCTS
B-LiFE « Biological Light Fieldable laboratory B-LiFE provides field biological and medical diag-
for Emergencies » is an operational service for nostic capabilites for crisis response and for drug
Emergency Response and Public Protection and trials, Telecommunication Emergency Nodes in-
Disaster Relief. B-LiFE has been developed under tegrating satcom and terrestrial communication,
the auspices of the European Space Agency. The Laboratory Information Management System,
members of the B-LiFE Consortium are: CTMA- Emergency and Logistics decision support tools,
UCL (Be), Belgian Civil Protection (Be), Aurea Real-time mapping for situational awareness (ep-
Imaging (Be), Eonix (Be), Nazka Mapps (Be), SES idemiological maps, sensors data), UAS for map-
Networks (Lu), Rohill (Nl). ping and transport.
ADDED VALUE MAIN REFERENCES
B-LiFE integrates a fieldable biological and med- Belgian Civil Protection; Belgian Defence; EU Civil
ical laboratory with space assets (satellite tele- Protection Mechanism; Government of Guinea;
communication, Earth observation and mapping, B-LiFE has been successfully deployed in Guinea,
GNSS and geolocation), terrestrial telecommunica- from 2014 to 2015, during the Ebola epidemics.
tion, laboratory and crisis management tools and
Unmanned Aerial Systems. B-LiFE has an auton- CERTIFICATION
omous information and telecommunication infra-
B-LiFE is certified in the EU Civil Protection
structure and can be deployed anywhere.
Mechanism. B-LiFE capabilities have been val-
idated by ESA. Eonix is certified for information
security management according to the ISO 27001
standard.
BELGIAN AEROSPACE | At the PARIS AIR SHOW 2019BELGIUM ENGINE CENTER
(BEC)
Rue du Fond des Fourches, 23
4041 HERSTAL
Tel.: +32 4 270 70 11
E-mail: info@bec.eu.com
Website: www.bec.eu.com
> Géry VANHALSBERGHE, Sales Manager
Tel.: +32 4 270 70 55
Mobile: +32 476 94 93 79
E-mail: gery.vanhalsberghe@bec.eu.com
COMPANY BACKGROUND and Civil aviation application as well as non-avia-
tion. NDI/NDT, Chemical Cleaning, 3-Axis inspec-
BEC is a one-stop shop for maintenance, repair
tion, Machining, Welding & brazing, Sheet metal
and overhaul (MRO) services for the F100-PW
working, Blasting, Heat Treatment, EDM, Silicone
engine platforms. We provide a complete, single
injection, Plasma spraying.
MRO solution through a wide range of in-house
repair capabilities. Today BEC also offer its equip-
ment’s and tooling portfolio as well as its 40+ years MAIN REFERENCES
of experience in Engine MRO activities to custom- BEC is key supplier of 15+ Air Forces operating
ers active in civil aviation. F-15 & F-16 in the world. High level of client-reten-
tion rate. BEC is part of AIM Norway.
ADDED VALUE
A true one-stop shop, strategically located between CERTIFICATION
a London-Amsterdam-Frankfurt- Paris square. Our BEC is Authorized Overhaul Facility by Pratt &
spare parts provisioning and trading offer shorter Whitney. We own ISO 9001 and EN 9110 certifi-
lead times and off-the-shelf readiness, while our cation. For civil aviation application development,
engineering and logistics services are targeted to BEC is also conducting the EASA & FAA Part 145
reduce overall cost for our customers. process.
RANGE OF PRODUCTS
F100-220/E as well as F100-229 maintenance
repair and overhaul. Our capabilities and equip-
ments are available for other application: Military
17-23|06|201913BRIDGESTONE AIRCRAFT TIRE EMEA Route de Bavay, 2 7080 FRAMERIES Tel.: +32 65 61 11 00 E-mail: sales@bridgestone-bae.com Website: www.bridgestone.com > Paolo PIERI, Sales Director EMEA COMPANY BACKGROUND Bridgestone Corporation, headquartered in Tokyo, is the world’s largest tire and rubber company. With a passion for excellence and creative pioneering, Bridgestone Aircraft Tire EMEA serves the com- mercial aviation industry with the highest quality aircraft tires, providing our customers and their passengers with superior safety and reliability. RANGE OF PRODUCTS Our outstanding tires are sourced exclusively from our factories in Japan and state-of-the-art retread- ing facility located in Belgium, the largest aircraft retreading plant in the world. MAIN REFERENCES Bridgestone Aircraft Tire EMEA supplies new and retread tires in the EMEA Region to more than 160 airlines and wheel shops. Around the world, over 2,000 aircraft equipped with Bridgestone aircraft tires land safely every hour. BELGIAN AEROSPACE | At the PARIS AIR SHOW 2019
BRITTE - MUSTAD
Z.I. des Hauts-Sarts
1ère Avenue, 58
4040 HERSTAL
Tel: +32 4 256 90 66
E-mail: info@mustad.be
Website: www.mustad.be
> Joseph SPEE, Sales Manager
Tel.: +32 87 63 98 94
Mobile: +32 473 91 53 49
E-mail: sales@mustad.be
COMPANY BACKGROUND several million pieces per year, from 3 mm in di-
ameter and up to 800x800x800 mm volumes. We
Founded in 1896 and specialized in the machining
machine all types of materials, even the most ex-
of high precision mechanical components as well
otic as well as blanks, foundry or forging blanks or
as the assembly of electromechanical systems for
various synthetic materials.
demanding sectors such as aeronautics, space,
defence, medical, transport or energy.
MAIN REFERENCES
ADDED VALUE Most of our clients are world leaders in their sec-
tors. They have built their successes on the com-
With 150 years of expertise in cutting-edge sectors
petitiveness and quality of their products and we
and 32 technologies mastered internally, Britte-
are proud to be one of their partners.
Mustad is more than just a machining expert but
a real industrializer of your products. Its location is
also a key asset with its multilingual staff (German, CERTIFICATION
English, Dutch and French) and makes it possible Certification EN9100
to export more than 40% of its turnover in various Certification ISO9001
countries including China and USA.
RANGE OF PRODUCTS
Our products are for the most part high-precision
and high value-added, from the single piece to
17-23|06|201915CAPAUL
Industriestrasse, 39
4700 EUPEN
Tel.: +32 87 59 55 60
E-mail: info@capaul.be
Website: www.capaul.be
> Luc DESPINEUX, Sales Manager
E-mail: info@capaul.be
COMPANY BACKGROUND • Machining on horizontal centers (pallet ma-
chining) up to 500x500x500 mm
Capaul is specialized in high precision machining
• Hard turning in an air-conditioned environ-
of complex aerospace components. In addition we
ment up to Ø420mm
have an outstanding experience in the assembly of
• Dye penetrant inspection, barrel finishing, ba-
sophisticated aircraft components such as SUMP
lancing , sandblasting
and BOOSTER modules for the LEAP engine as
• Complete integration of sub-assemblies
well as modules for the CFM56 engine.
(SUMP LEAP, BOOSTER LEAP and CFM56)
Our modern facility offers high precision mul-
ti-axis CNC-turning and milling centers as well as RANGE OF PRODUCTS
3D-measuring equipment installed in a modern
fully air-conditioned production hall (20°C). Parts of aircraft engines and structural compo-
nents
ADDED VALUE
MAIN REFERENCES
• CNC-turning on 2 to 5 axis turn-mill centers up
to Ø1250mm Airbus – Boeing – General Electric – Safran
• 3,4&5 axis machining on vertical centers up to Group – Snecma Motors – Sonaca – Technical
1250x1000x1000mm Airborne Components – Asco Industries
• 5-axis simultaneous machining up to
Ø1250x1000mm in a 2000m² fully air-condi- CERTIFICATION
tioned hall EN 9100: 2016
• High-precision 3D-Measuring equipment
BELGIAN AEROSPACE | At the PARIS AIR SHOW 2019CENAERO
Rue des Frères Wright, 29
6041 GOSSELIES
Tel.: +32 71 91 09 30
E-mail: info@cenaero.be
Website: www.cenaero.be
> Philippe GEUZAINE, General Manager
Mobile: +32 499 37 25 00
E-mail: philippe.geuzaine@cenaero.be
COMPANY BACKGROUND RANGE OF PRODUCTS
Cenaero is a private non-profit applied research Cenaero provides engineering services as well as
center providing to companies involved in a tech- software through its massively parallel multi-phys-
nology innovation process numerical simulation ics platform Argo, its manufacturing process sim-
methods and tools to invent and design more ulation and crack propagation platform Morfeo
competitive products. Internationally recognized, and its design space exploration and optimization
Cenaero is mainly active in the aerospace (in par- platform Minamo. Cenaero operates experimental
ticular turbomachinery), manufacturing, process facilities in composite manufacturing and prototyp-
engineering, energy and building sectors. ing as well as a supercomputing infrastructure with
14,000 cores.
ADDED VALUE
Cenaero provides expertise for advanced (com- MAIN REFERENCES
posite and metallic) structural design, manufactur- Cenaero is a research partner of Safran since
ing processes modeling (welding, machining and 2007.
additive manufacturing), high resolution CFD for
aeronautics (large eddy and direct numerical sim- CERTIFICATION
ulations), hypersonic flows and ablative materials,
Cenaero is certified against the EN 9100:2018 and
buildings and smart cities, design space explora-
ISO 9001:2015 standards.
tion and optimization, thermo-fluid processes and
systems modeling.
17-23|06|201917CENTRE SPATIAL DE LIÈGE
Avenue du Pré-Aily, B29
4031 ANGLEUR
Tel.: +32 4 382 46 00
E-mail: csl@uliege.be
Website: www.csl.uliege.be
> Claude JACQMIN, General Manager
E-mail: cjacqmin@uliege.be
> Joseph BERNIER, Head of Technology Partnership Program
Tel.: +32 4 382 46 03
E-mail: jbernier@ulg.ac.be
COMPANY BACKGROUND radiation) – Photonics Engineering (optical design,
metrology, coating development) – Mechanical &
CSL is an applied Research Center, 110 persons,
Thermal Engineering – Technology transfer
owned by University of Liège. Since 1964, CSL is fo-
cused on space systems for payloads and associat-
ed technologies. CSL was the first Test Centre agreed MAIN REFERENCES
by ESA for space harsh environment tests. ESA rec- Lots of space instruments from ESA and NASA
ognizes also CSL as a Centre of Excellence in optics. missions, or some national space agencies, have
been designed, developed and/or qualified with-
ADDED VALUE in CSL premises: EIT-SOHO, OM-XMM, FUV-SI-
IMAGE, OMC-Integral, HI-STEREO, COROT, PACS-
From design to integration and calibration (on ground
HERSCHEL, PLANCK, SWAP-Lyra-Proba-2, JUNO,
or in-flight) CSL elaborates solutions for payload sys-
GAIA, Tropomi, MIRI-JWST, EUI-HI- Solar Orbiter,
tems and sub-systems. With a unique expertise in
CHEOPS, WISPR-Solar Probe Plus, FUV-ICON,
system engineering, optics and thermal regulation,
MSI, AEOLUS Aladin, etc. In aeronautics, we are
CSL delivers a customized service to expose instru-
in partnership with AIRBUS DS, SONACA, SABCA,
ments, systems or satellites to extreme conditions
Safran Group, etc.
encountered in deep space. The ‘Environmental Test
Facility services’ (cryogenics, vacuum, vibrations)
are provided in an ultra-clean environment. CERTIFICATION
The CSL technologies are also used in Collaborative CSL maintains an approved Quality Management
Research projects, in partnership with space and System based on two types of requirements:
non-space (e.g. medical) industries, in various • Requirements from the European ISO system
technological fields as optical design and metrol- through the ISO 9000 series (ISO9001-2015)
ogy (e.g. straylight management), surface engi- and Aeronautical standards EN9100-2018.
neering (e.g. optical coatings for sensors, SPR,…), • Requirements from the European Space Agen-
electronics solutions for harsh environment, cy and, consequently from all partners dealing
Additive Manufacturing techniques, radar image with the Space area, through the Agency stan-
processing for geomatics industry. In aeronautics, dards ECSS.Q.20.07A – “Quality assurance for
CSL is specialized in Non-Destructive Testing tech- test center”
niques based on laser applications, shearography, CSL is certified by Bureau Veritas International
thermography, laser ultrasounds methods. following the European standard EN9100:2018,
American Standard AS9100:d and Asian standard
RANGE OF PRODUCTS/SERVICES JISQ9100:2016. Those different standards are rec-
ognized by IAQG – International Aerospace Quality
Qualification services (simulating on ground the
Group. This certificate is valid till 10 April 2022.
space environment – thermal vacuum, vibration or
BELGIAN AEROSPACE | At the PARIS AIR SHOW 2019CITIUS ENGINEERING
Rue Louis Plescia, 7
4102 SERAING
Tel.: +32 4 240 14 25
E-mail: info@citius-engineering.com
Website: www.citius-engineering.com
> Philippe HERMANT, Sales & Business Developer > Jean FANIELLE, Sales & Business Developer
Tel.: +32 4 325 04 16 Tel.: +32 4 325 04 12
Mobile: +32 477 94 39 08 Mobile: +32 498 05 44 28
E-mail: philippe.hermant@citius-engineering.com E-mail: jean.fanielle@citius-engineering.com
> Fabien DEFAYS, CEO > Grégory REICHLING, CEO
Tel.: +32 4 325 04 08 Tel.: +32 4 325 04 24
Mobile: +32 476 59 03 61 Mobile: +32 478 76 00 62
E-mail: fabien.defays@citius-engineering.com E-mail: gregory.reichling@citius-engineering.com
COMPANY BACKGROUND RANGE OF PRODUCTS
Created in 2009, Citius Engineering is specialised Test solutions: Citius develops specific solutions
in test solutions, automation and robotics. Its activ- for testing equipment, provides its customers with
ities are focused on the development of industrial own integrated testing facilities and proposes com-
tools in the broadest sense: test equipment, means plete solutions of testing means based on special-
of production, robots, turnkey machines, custom- ized skills in instrumentation and data acquisition
ised studies, and industrial project management. & control systems.
Advanced production systems: Citius develops
ADDED VALUE turnkey solutions for industrial processes thanks
Over the years, Citius Engineering has acquired to its skills in automation, robotics, vision and in-
significant experience in the field of test solutions dustry 4.0.
for industrial equipment or systems. These turn-
key test solutions integrate the latest technology MAIN REFERENCES
in Data Acquisition & Control Systems, ATE, in- THALES ALENIA SPACE, SAFRAN AERO
strumentation or mechanics. Often equipped with BOOSTER, SABCA, MECAR, AW EUROPE,
hundreds of measuring lines, these test solutions EMERSON, THERMO FISHER
constitute efficient systems for industrial develop-
ment and production programmes.
CERTIFICATION
ISO 9001:2015
17-23|06|201919COEXPAIR
Rue des Entrepreneurs 10
5020 NAMUR
Tel.: +32 81 56 62 00
E-mail: public@coexpair.com
Website: www.coexpair.com
> André BERTIN, Administrateur Délégué
Tel.: +32 81 56 62 00
E-mail: public@coexpair.com
COMPANY BACKGROUND RANGE OF PRODUCTS
Coexpair is a Belgian company active in the aero- • Composite Production Workstation
nautical sector since 2006. Our strategy is based • Composite Mold & Tools
on an original business model. It offers services to • Composite Part & Process Development
support its Customers in the development of new
applications in composite materials. This includes MAIN REFERENCES
the manufacture of first part prototypes (no seri-
Today Coexpair is a recognized partner of the larg-
al production). Once the research is complete,
est OEM and Tier-1 suppliers in the sector. Several
Coexpair extends its offer to the assembly of pro-
European companies have become regular cus-
duction equipment needed for RTM industrializa-
tomers, including Airbus and Safran groups. Our
tion.
plant is a unique place in Europe to develop and to
transfer advanced composite manufacturing tech-
ADDED VALUE nologies.
The position of the office inside the workshop gives
the engineers a great opportunity to combine de- CERTIFICATION
velopment and hands-on trials. Moreover, the part-
EN9100 certification
nership with Radius Engineering (Salt Lake City,
USA) ensures our Customers the same high quali-
ty and reliable equipment and services worldwide.
On a general way, Coexpair is supporting its
Customers from the idea that sprouts in their de-
sign office up to the installation of their production
RTM workshop.
BELGIAN AEROSPACE | At the PARIS AIR SHOW 2019DEDECKER PRECISION
MECHANICS
Boulevard Industriel, 104
7700 MOUSCRON
Tel.: +32 56 85 75 26
E-mail: dedecker@dedecker.com
Website: www.dedecker.com
> Joris POOT, Sales Representative
Mobile: +32 471 97 96 74
E-mail: poot.j@dedecker.com
COMPANY BACKGROUND RANGE OF PRODUCTS
Dedecker Precision Mechanics is specialised in • Bar turning
automatic turning of metal and plastic parts; as • Billet machining
well as the machining and grinding of precision • Cubic parts machining
parts according to drawings or models. We do also • Grinding
perform the heat treatment and surface treatment • Surface treatment
in-house. • Heat treatment
Our focus on progress has spurred us to acquire • Mechanical assembly
the latest generation of CNC machines. Our flexibil-
ity allows us to create your parts in small, medium MAIN REFERENCES
and large batches. Picanol – GIMA – Schneider – Hitachi – Grutti –
We are also able to perform all types of repair op- Dana – CMI – Caterpillar.
erations.
CERTIFICATION
ADDED VALUE ISO 9001
Dedecker Precision Mechanics is a company mem-
ber of the familial GEIE Sub-Alliance specialised for
more than 60 years in the industrial subcontracting
of plastic and metallic parts. Please discover our
activities on our web site: www.sub-alliance.com
17-23|06|201921DELTATEC
Rue Gilles Magnée 92/6
4430 ANS
Tel.: +32 4 239 78 80
E-mail: contact@deltatec.be
Website: www.deltatec.be
Facebook: @Deltatecdesignhouse
Twitter: @Deltatecdesign
> Gérard HABAY, Technical Manager > Eric CALLUT, Senior Project Manager
Tel.: +32 4 246 79 76 Tel.: +32 4 246 79 87
E-mail: g.habay@deltatec.be E-mail: e.callut@deltatec.be
COMPANY BACKGROUND RANGE OF PRODUCTS
DELTATEC is a high-tech design company, special- • UV Cameras
ized in advanced hardware and software technol- • Hyperspectral Cameras
ogies with a strong focus on digital imaging appli- • Multipurpose EGSE
cations, also embracing the recent Deep Learning/ • On-board Computers including software
AI trend.
The company is active in the industry sector, in MAIN REFERENCES
aerospace and in the TV broadcast market. Companies like ESA, CSL, NEWTEC, THALES,
Space started in 2005 with developments of imag- SAFRAN, Luxspace, Spacebel, and many others,
ing payloads and related data processing, includ- regularly entrust to DELTATEC for their projects.
ing “NewSpace” approach.
CERTIFICATION
ADDED VALUE DELTATEC is member of SKYWIN, Aerospace clus-
• A Belgian design house located in heart of Eu- ter of Wallonia.
rope
• 30 years of experience and more than 500
projects in Industry, Aerospace, Vision and TV
Broadcast
• A human-sized team of more than 45 high-le-
vel engineers
• A recognized expertise in the framework
of ESA missions as prime contractor and
subcontractor
BELGIAN AEROSPACE | At the PARIS AIR SHOW 2019DESIMONE
Rue Fontenelle, 18
6240 FARCIENNES
Tel.: +32 71 81 18 59
E-mail: info@desimone.be
Website: www.desimone.be
> Frédéric SENTE, CEO > Grégory LENTIER, Sales Manager
Tel.: +32 71 81 18 59 Tel.: +32 71 81 18 59
E-mail: Frederic.sente@desimone.be E-mail: gregory.lentier@desimone.be
COMPANY BACKGROUND RANGE OF PRODUCTS
De Simone has been designing and manufac- Automated non-destructive testing systems: we of-
turing special machines for 30 years. From our fer tailor made solutions to automate your quality
Farciennes facility in Belgium, we have installed control processes, mastering various NDT tech-
machines in almost every continent. Originally niques, (amongst Eddy current and vision)
active in the glass industry, De Simone has since Automation of CNC-machines: a wide range of ro-
extended its activities towards various industry seg- botized systems to load, unload and manage al-
ments, amongst which aerospace takes an impor- most every CNC-machine of the market.
tant part.
Production lines: conception & production of tailor
made lines; revamping; CE compliance services.
ADDED VALUE
Team: some 40 passionate people coming from MAIN REFERENCES
various disciplines (mechanic, pneumatics, robot-
ics, hydraulics, automation, IT, etc.) Aerospace industry: SKF Aerospace, Safran
Aero Boosters, Sonaca, Sabca, NTN-SNR, TAC,
Innovation: each machine we produce is designed Dumoulin AERO…
with the right technology to ensure maximum cost
effectiveness for our customers and to integrate in- Other sectors: Mecar, Alstom, AGC, Saint-Gobain,
dustry 4.0 processes. Arcelor Mittal, Bel, Chimay, Mondelez, Materne,…
Full service adapted to your needs: design, pro-
CERTIFICATION
duction, installation, integration, CE compliance,
maintenance services. VCA certificate
17-23|06|201923DUMOULIN AERO Rue Al Trappe, 110 4432 ALLEUR Tel.: +32 4 228 89 60 Mobile: +32 475 27 09 09 E-mail: management@dumoulin-aero.com Website: www.dumoulin-aero.com > Geoffroy-Vincent CAMMERMANS, CEO Tel.: +32 4 228 89 64 Mobile: +32 475 27 09 09 E-mail: gcammermans@dumoulin-aero.com COMPANY BACKGROUND MAIN REFERENCES In 2003, Dumoulin Aero, launched a program to Tier 2: Airbus and Embraer manufacture titanium and other allied steel parts Tier 1: Bombardier for aircrafts obtaining the EN 9100 Certification. Today, the company performs a broad range of ASCO, SONACA and BMT. turning-milling and milling operations mostly for connection parts between Slats and Slat-Tracks, CERTIFICATION Flaps and Flap-Tracks as well as Carriages. EN 9100 RANGE OF PRODUCTS Bolts and pins Links Excentric Bolts and Bushes BELGIAN AEROSPACE | At the PARIS AIR SHOW 2019
FERONYL
Boulevard Industriel, 101
7700 MOUSCRON
Tel.: +32 56 85 75 30
E-mail: feronyl@feronyl.com
Website: www.feronyl.com
> Maxime BERTIN, Sales Representative
Mobile: +32 470 90 08 47
E-mail: bertin.m@feronyl.com
COMPANY BACKGROUND professionals who pool their complementary skills
and their marketing strength to promote business
The FERONYL company was founded in 1950.
and innovation through partnership and to facili-
The region was strong in the textile sector and tate technological exchange. See: www.sub-alli-
at the time we developed gears made of injected ance.com
nylon as an alternative to metal ones, hence our
name FerOnyl: from Fer (the French word for RANGE OF PRODUCTS
iron…) to Nylon...
Our primary specialties are:
While, from 1950 to 1960, FERONYL built injection • precision injection molding of plastics
machines and injection molds and performed in- • the transformation of all materials; from the
jection properly speaking, the latter activity has al- most basic to the most complex, possibly filled
ways been its core business. The activity of manu- with glass or carbon fibers, etc.
facturing the machines was sold off, but FERONYL • achieving tight tolerances
preserved its mastery of mold design and produc- • performing specific overmoldings (stainless
tion. It is this mastery which makes it possible to steel, titanium, ceramic, etc.)
offer a complete service as technical subcontrac- • molding on presses having 10 to 1300 tons of
tor; including special surface treatments and the clamping force (i.e. parts ranging from 0.5 to
optimization of inserts prior to being overmolded. 6500 grams)
ADDED VALUE MAIN REFERENCES
FERONYL has been specialized in the injection Aviacomp – Stelia Aerospace – Safran – Safran
of technical parts in metal, composite and plastic Aero Boosters – Safran Filtration Systems –
materials since 1950. In addition to that, we also Donaldson – Sonaca – Crouzet – LMB Aerospace
have an MIM (Metal Injection Molding) activity, one – Esterline group.
in which our partners are putting a great deal of
faith, seeing in it a new technology for their future
developments.
CERTIFICATION
ISO 9001 & EN 9100
Feronyl is part of the GEIE Sub-Alliance. Sub-
Alliance brings together industrial subcontracting
17-23|06|201925FN HERSTAL
Voie de Liège 33
4040 HERSTAL
Tel.: +32 4 240 81 11
E-mail: info@fnherstal.com
Website: www.fnherstal.com
COMPANY BACKGROUND RANGE OF PRODUCTS
From its inception in 1889, FN HERSTAL’s core FN HERSTAL provides comprehensive airborne
business has been small caliber firearms and am- fixed-forward firing solutions and airborne crew
munition. Over the years, this focus has expanded served weapon solutions designed and developed
to include complementary products and capabili- around FN 7.62 and .50 cal machine guns.
ties, such as integrated airborne weapon systems
for military use. MAIN REFERENCES
FN HERSTAL is part of the Belgium-based Herstal Over 5,200 FN airborne weapon systems are de-
Group, which has a turnover of over €800 million ployed on a wide range of carriers across the world.
and is supported by 2,900 talented direct employ-
ees. CERTIFICATION
FN HERSTAL is ISO 9001 and AS/EN 9100 cer-
ADDED VALUE tified.
FN HERSTAL provides high added value defense
solutions for multi-role military helicopters and
subsonic aircraft. Rather than just designing and
producing the complete system, FN HERSTAL also
takes care of the integration, within the context of
the operational platform, which requires a deep
understanding of the weapons and their effects on
the carriers.
BELGIAN AEROSPACE | At the PARIS AIR SHOW 2019GDTech
Avenue de l’Expansion, 7
4432 ALLEUR
Tel.: +32 4 367 87 11
E-mail: info@gdtech.eu
Website: www.gdtech.eu
> Guy JANSSEN, CEO
Tel.: +32 4 367 87 12
E-mail: guy.janssen@gdtech.eu
COMPANY BACKGROUND RANGE OF PRODUCTS
Engineering company, GDTech offers his expertise • Engineering Consultancy Services
to industrial projects spanning across all necessary • Design, drawing and manufacturing: compo-
stages for Design, Simulation and Industrialisation nents & assembly, manufacturing tools, indus-
(in our own offices or on customer site, as provider trial equipment’s
of services, project manager or consultant). • Numerical Simulation: HPC, multiphysics so-
GDTech commits to deliver an integrated service lutions, systems, CFD, structures, collabora-
covering the entire product development process. tive simulation platform
• Tests: static, dynamic, numerical simulation
correlation
ADDED VALUE
• Tailored Made Solutions: lighting
Thanks to our knowledge of the most advanced in- • Safety Design: road equipment’s, industrial
dustrial technologies and our expertise, we provide site.
you with a customized solution.
Our assets ... our expertise, our CAE complete
offer and our quality commitment (ISO 9001 and
EN9100 certified).
17-23|06|201927GRIMONPREZ TRANSMISSION
GEARS
Rue Theodor Klüber, 7
7711 DOTTIGNIES
Tel.: +32 56 33 30 32
E-mail: info@grimonprez.com
Website: www.grimonprez.com
> Joris POOT, Sales Representative
Mobile: +32 471 97 96 74
E-mail: poot.j@dedecker.com
COMPANY BACKGROUND RANGE OF PRODUCTS
1877: founding of the company, manufacturer of Grimonprez Transmission Gears is specialised in
agricultural machinery 1885: stationary coal gas the manufacturing of all types of gears (straight
engines, 1925: stone- and woodworking machin- gears, helical, straight bevel,…); and in the manu-
ery, 1950: production of gears, 1986: shutdown of facturing of transmission boxes in small and medi-
stone- and woodworking machinery, 1997: Patrice um sized batches.
Dedecker takes over the company, 2006: new All operations are performed in-house: the hobbing
name Grimonprez Transmissions Gears, 2008: & shaping, the groving & broaching, the CNC turn-
R&D and co-engineering, 2010 start of activities in ing & milling; as well as the heat & surface treat-
India ment.
ADDED VALUE MAIN REFERENCES
Grimonprez Transmission Gears is part of the GEIE Caterpillar – Dana – Konecranes – Vandewiele –
Sub-Alliance. Liebherr – Skyclimber – Dangel.
Sub-Alliance brings together industrial subcon-
tracting professionals who pool their complemen- CERTIFICATION
tary skills and their marketing strength to promote
ISO 9001
business and innovation through partnership and
to facilitate technological exchange. See: www.
sub-alliance.com
BELGIAN AEROSPACE | At the PARIS AIR SHOW 2019JD’C INNOVATION
Rue de l’Expansion 29
4460 GRACE-HOLLOGNE
Tel.: +32 42 39 80 80
Website: www.jdcinnovation.com
Facebook: @JDC.Group
Twitter: @JDCinnovation
> Philippe DUCULOT, Export Sales Manager > Dany DRION, CEO
Tel.: +32 42 39 80 76 Tel.: +32 42 39 80 86
Mobile: +32 495 78 62 68 Mobile: +32 475 79 90 17
E-mail: philippeduculot@jean-delcour.be E-mail: danydrion@jean-delcour.be
COMPANY BACKGROUND RANGE OF PRODUCTS
Next-Door, Best-Cost, One-Stop Shop dedicated Connectics: design / development, industrializa-
to Composite, Connectics and Mechatronics for tion, production - Mechatronics: design / devel-
Defense and Aerospace since 2006. Cost Effective opment , industrialization, production / assembly
Solutions tailored to each customer’s specific - Composite: design / development, industrializa-
needs, from build-to-print Series to complete pro- tion, manufacturing - Series production (Build-
ject management. to-Specs)
Next-Door, Best-Cost, One-Stop Shop dedicated • Connectics: design / development, industriali-
to Composite, Connectics and Mechatronics for zation, production
Defense and Aerospace since 2006. Cost Effective • Mechatronics: design / development, indus-
Solutions tailored to each customer’s specific trialization, production / assembly
needs, from build-to-print Series to complete pro- • Composite: design / development, industriali-
ject management. Our best cost approach will zation, manufacturing
save you the pain to travel the world looking for • Series production (Build-to-Print / to-Specs)
low prices.
MAIN REFERENCES
ADDED VALUE THALES BELGIUM - CMI DEFENCE - FN
Competitiveness, Last generation tools & infrastruc- HERSTAL -- SONACA AIRCRAFT -- THALES
tures, Project Management expertise, from R&T to ALENIA SPACE - SAFRAN AERO BOOSTERS -
Build-to-Print / to-Specs, Proximity, Flexibility… GRADEL ...
and Social Engagement
• Competitiveness CERTIFICATION
• Last generation tools & infrastructures EN9100:2018 - ISO9001:2018 - Vacuum and
• Project Management expertise, from R&T to Autoclave Polymerization Process qualified by
Build-to-Print / to-Specs, Airbus, Safran Aeroboosters and Sonaca.
• Proximity, Flexibility… and Social Engagement
17-23|06|201929LA NITRURATION MODERNE
Rue Gilles Galler, 22/24
4000 LIEGE
Tel.: +32 4 235 47 20
E-mail: dambeckb@gmail.com
Website: www.lanitruration.be
> Daniel BOULANGE, Président
Tel.: +32 4 235 73 20
Mobile: +32 475 45 26 33
E-mail: dambeckb@gmail.com
COMPANY BACKGROUND RANGE OF PRODUCTS
La Nitruration Moderne (LNM) performs Non Cadmium plating Chemicall Manganese
Destructive Testing, Electrochemical, Chemical (Nadcap) Conversion coating Phosphating
and Thermochemical treatments of metals, Paint Chromic Acid Fluorescent Fluonitric Pickling
application and Identification. Anodizing (Nadcap) Penetrant testing of Titanium
(Nadcap)
Established in 1928 in Liege, at the center of in- Tartaric Sulfuric Magnetic Particle Dehydrogenation
dustrial Europe, LNM carries out a large range of Anodizing Inspection
treatments for the Aeronautical and the Military (Nadcap)
sectors. Zinc-Nickel plating Identification Degreasing
Qualified according to EN 9100, LNM is also certi- Sulfuric Anodizing Dry Abrasive Pyrometry
Blasting
fied in Nadcap non-destructive testing and chem-
Painting Sealing of anodized Black Oxyde
ical processes. layers
LNM is a ‘one stop shop’, from machining to as- Passivation Zinc Phosphating
sembly, without subcontracting operations prior to
the supply to the assembly lines. MAIN REFERENCES
SONACA – ASCO – DUMOULIN – TAC – SHURLOK
ADDED VALUE – PRETEC – MAP
LNM is a ‘speed shop’ for the treatments referred
to hereinafter. CERTIFICATION
EN9100
NADCAP: Chemical Processing and NDT (MPI +
FPI)
BELGIAN AEROSPACE | At the PARIS AIR SHOW 2019LESCAV AERO
Rue de L’Avouerie, 3
4000 LIEGE
Tel.: +32 4 265 55 05
E-mail: francois.leroy@lescav.be
nathalie.nyssens@lescav.be
Website: www.lescav.com
> François LEROY, CEO
Tel.: +32 4 265 55 05
Mobile: +32 499 44 52 95
E-mail: francois.leroy@lescav.be
COMPANY BACKGROUND RANGE OF PRODUCTS
The airspace industry is experiencing rapid growth. Masking tools for thermal spray, HVOF, shot peen-
The competitive environment requires continuous ing and sandblasting. Handling and transport tools
investments in innovative technologies. LESCAV with « no metal contact » concept and georefer-
Aero is a trusted partner in protective solutions enced tracking inside the plant or from site to site.
for special treatments and handling of aircraft part
and components MAIN REFERENCES
SAFRAN Group, ASCO, Sonaca, SABCA, BMT,
ADDED VALUE Airbus Helicopter
Masking products are molded from silicone for
faster installation and consistant quality results. CERTIFICATION
Our tooling is designed with an exclusive « no met-
EN 9001:2018 based on ISO 9001:2015
al contact » concept, which enables easy handling
and transport of aircraft parts and components
without risks of shock or damage
17-23|06|201931MATERIA NOVA
Avenue Copernic, 3
7000 MONS
Tel.: +32 65 554902
E-mail: communication@materianova.be
Website: http://www.materianova.be/
Linked in: https://www.linkedin.com/company/materianova
> Mireille POELMAN, Program Leader
Mobile: +32 477 656 183
E-mail: mireille.poelman@materianova.be
COMPANY BACKGROUND RANGE OF PRODUCTS
Materia Nova is a R&D center based on advanced R&D projects in the field of new materials, mul-
and disruptive technologies in the field of sustain- tifunctional surfaces, energy, biotechnology, bio-
able materials, multifunctional surfaces, materials based solutions and recycling, upscaling on pilot
for energy and biotechnology. or industrial equipment, characterization, testing,
impact assessment of materials and bio-based
ADDED VALUE molecules, life cycle analysis (LCA), theoretical
and practical training on new developed technol-
Materia Nova offers partnerships with small, medi-
ogies, market studies.
um or large companies for research and/or devel-
opment projects which are validated at industrial R&D research axes: white biotechnology, (bio)pol-
scale. Materia Nova also gives technical assistance ymers and (bio)composites, sol-gel and wet coat-
to companies such as: upscaling, feasibility test- ings, metallization, plasma technologies, electro-
ing, life cycle assessment, material characteriza- chemistry, corrosion, organic electronics, chemical
tion, market research, state-of-the-art, technology sensors, life cycle thinking.
watch and targeted consulting.
CERTIFICATION
ISO 9001 & 14001
BELGIAN AEROSPACE | At the PARIS AIR SHOW 2019MECASPRING
Prolongement de l’Abbaye, 86
4040 HERSTAL
Tel.: +32 4 240 55 70
Website: www.mecaspring.be
> Jos BODEN, Sales Manager > Olivier WATTIAUX, Sales Manager
Mobile: +32 485 55 35 66 Mobile: +32 495 81 03 72
E-mail: j.boden@mecaspring.be E-mail: o.wattiaux@mecaspring.be
COMPANY BACKGROUND RANGE OF PRODUCTS
MECASPRING is a manufacturer of small, me- MECASPRING is a manufacturer of small, me-
dium and large series of precision springs in wire dium and large series of precision springs in wire
and flat strip materials (compression, tension and and flat strip materials (compression, tension and
torsion springs according to drawing or customer torsion springs according to drawing or customer
samples), mechanic welded assemblies and samples) mechanic welded assemblies and
sub-assemblies, tailor-made machining parts. sub-assemblies. Tailor-made machining parts.
Our engineering team is at your disposal for your
new projects in research and development. Cer- MAIN REFERENCES
tified ISO 9001: 2015 and EN 9100: 2016. Ac- AERONAUTICS: SAFRAN
credited supplier for Aeronautics, Defence, Space DEFENCE: FABRIQUE NATIONALE GROUPE –
and Automotive. DIEHL – MECAR – NEXTER – RHEINMETALL
GAZ – CONNECTICS – AUTOMOTIVE - LIGHTING
ADDED VALUE
Combining in house coil winding of springs in CERTIFICATION
wire, stamping , cutting and bending of springs
Our company is certified according to ISO 9001:
and spring oriented products in strip metal , to-
2015 and EN 9100: 2016 standards.
gether with machining operations on precision
parts,
We are accredited supplier according to ISO
9001: 2015 and EN 9100: 2016 towards highly
qualified customers in Defence, Aeronautics,
Space and general industry (Automotive, Gaz,
Connectics, ….)
17-23|06|201933MOCKEL
Rue du Développement 9 – East Belgium Park
4837 BAELEN
Tel.: +32 87 59 39 59
E-mail: y.plumer@mockel-precision.be
Website: www.mockel-precision.be
> Yohann PLUMER, Project Manager
Tel.: +32 87 59 55 14
Mobile: +32 472 31 60 90
E-mail: y.plumer@mockel-precision.be
COMPANY BACKGROUND RANGE OF PRODUCTS
MOCKEL is active in the field of high precision me- MOCKEL manufactures serial mechanical parts or
chanics for the defence, aeronautics and space assemblies from 5 to 10 000 units in all possible
industries. The company has the state-of-the-art metal alloys. Through its partners, MOCKEL is also
machinery, the technical know-how and the neces- able to realise any kind of heat / surface treatments
sary experience to handle all aspects of production or paint.
from start to finish. Be it large or small parts, sim-
ple or sophisticated components, we translate the MAIN REFERENCES
ideas of our customers into technical excellence.
Safran Aerobooster, SABCA, ASCO, TAC, Thales
Alenia Space, FN Herstal, CMI Defence
ADDED VALUE
“We deliver more than parts”: MOCKEL has devel- CERTIFICATION
oped a wide range of services in order to support
ISO 9001:2015
its customers from the conception until the inte-
gration of their parts: Project management, supply EN 9100:2018
chain management, assembly of parts, FAI docu-
mentation, ...
BELGIAN AEROSPACE | At the PARIS AIR SHOW 2019NOLISYS
Rue de Leumont, 49
4520 WANZE
E-mail: info@nolisys.com
Website: www.nolisys.com
> Thibaut DETROUX, Managing Director > Marwan RADI,
Mobile: +32 485 32 91 87 Business Development Manager
E-mail: tdetroux@nolisys.com Mobile: +32 485 17 08 08
E-mail: marwan.radi@nolisys.com
COMPANY BACKGROUND RANGE OF PRODUCTS
Created in 2016, NOLISYS is a start-up company Our offering consists in:
active in the field of nonlinear vibrations. It is the • The NI2D® software, to analyze nonlinear ex-
result of more than 15 years of research carried perimental data and perform advanced simu-
at the University of Liège, in Belgium. We provide lations.
consulting and software solutions to handle non- • Consulting services to support our partners in
linear vibrations, which are frequent occurrences designing and certifying their structures.
in engineering structures due to the presence of • Trainings and workshops.
elastomeric materials, gaps, gears, friction, bolted
connections, etc. MAIN REFERENCES
Airbus, Airbus Defence and Space, ArianeGroup,
ADDED VALUE Atlas Copco, Pratt & Whitney Canada, Safran Aero
Building on our expertise for experimental and Boosters, Sandia National Lab, Sonaca, US Air
computational studies, engineers can apprehend Force.
vibration analysis confidently and move forward in
the design cycle of their prototype without puzzling
hurdles and without compromise on the structure’s
performance. Our technologies power test cam-
paigns and simulations with applications in aero-
space, automotive and mechanical engineering.
17-23|06|201935You can also read
