PROFICIENCY TESTING PT programs 2021 - Inspeed Global
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
version 5
Once Certified .. Globally Recognized
PROFICIENCY TESTING
PT programs
Accredited PT Provider Interna�onal Laboratory
according to Accredita�on Coopera�on
ISO/IEC 17043:2010
Registered Member
ID number 590861
bundesanstalt für material-
forschung und prüfung
2021
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.com
Inspeed Global – IG – is the first accredited PT provider by PJLA
– US accreditation body – according to: ISO/IEC 17043:2010
01
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.com
IG is a worldwide company that is accredited as the first PT provider by PJLA (USA) according to
ISO/IEC 17043:2010.
IG has international offices in different countries to deliver the services of conformity assessment
that includes; Proficiency Testing to Testing and Calibration Laboratories that implement
ISO/IEC 17025 : 2017 Scope of Accreditation.
Our PT programs cover the scope of:
PAGE PAGE
Construction Non-Destructive Customized
Metallic
Materials Testing (NDT) PT programs
Materials
PAGE PAGE
02
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.com
PT Requirements for some accreditation bodies:
Accreditation Requirements for EIAC Accreditation Requirements for GAC
The laboratory shall participate in Proficiency testing program • The CAB is required to cover PT participation/ILC for
(PTP) organized by any competent PTP provider and shall all its activities
provide evidence that their results are within the acceptance
criteria of the PTP organizer. • If a CAB does not participate or participates only
The minimum amount of participation in proficiency testing partially in PT/ILC, which are available and adequate
schemes: then it might have consequences for the accreditation of
the CAB
EIAC-RQ-LB-002 (4.6.2)
4 times per year for all the critical tests BD-091007-08-04 TN 4.0: GAC Technical Note 4 Proficiency
2 times per year all tests Testing and ILC Policy (3.1)
EIAC-RQ-LB-001 (12.2.7)
One activity related to each discipline at least once a year.
Accreditation Requirements for IAS Accreditation Requirements for UKAS
Laboratories that are accredited or seeking accreditation to Laboratories preparing for initial accreditation or wishing to
ISO/IEC Standard 17025 are expected to participate in at least
extend their scope of accreditation are required to participate in
one proficiency test (PT) for each field of accreditation. The
laboratory is expected to complete the PT(s) within four years. PT/ILCs where such schemes are available
IAS POLICY ON PROFICIENCY TESTING FOR UKAS Policy on Participation in Proficiency Testing TPS 47
LABORATORIES (4.6)
03
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.com
choose IG PT programs for:
Full member of the The First accredited PT provider
European PT Informa�on (ISO/IEC 17043) by the US
System (EPTIS). accredita�on body PJLA.
A�er successful
Highly commi�ed
to schedules and performance in 2019 & 2020 1020 par�cipa�ng
quick reply for in organizing of laboratories
technical ques�ons. worldwide in
the proficiency tes�ng 2019 & 2020.
programs and accredita�on
according to
ISO/IEC 17043.
Less than 20 days We are looking forward to More than
turnaround �me working together in 2021 112 PT
for most of our
PT reports. programs
annually.
Flexibility to organize Sta�s�cal evalua�on
customized PT programs according to the latest
according to the labs’ interna�onal standards
needs. (ISO 13528& ISO 5725 1-6)
04
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.com
CONSTRUCTION MATERIALS TESTING
PT programs for the year 2021Soil Testing:
January PT-CON- 21-101
400 $
01 July Determination of liquid limit , Plastic Limit and Plasticity Index
November
ASTM D 4318-17e1 / BS1377:Part 2:1990,CL 4.3,4.5 &5
January PT-CON- 21-104
450 $ July
02 Determination of Particle Size Distribution
November
ASTM D 422-2007 / BS 1377: part2: 1990,CL9.2&9.3
January PT-CON- 21-105
400 $ July
03 Particle Size Distribution by hydrometer method
SOIL
November
ASTM D 422-2007 / BS 1377: part2:1990,CL 9.5
TESTING 04
400 $
January
July
November
PT-CON- 21-111
Determination of California Bearing Ratio (CBR)
BS1377:Part 4:1990,CL 7
January PT-CON- 21-122
400 $ July
05 Determination of dry density/moisture content relationship
November
ASTM D 1557-12e1 / BS 1377:part 4:1990,CL3.5/3.6
PT-CON- 21-127
400 $ July
06 November Determination of Sand equivalent value
ASTM D 2419-14/ BS EN 933- 8:2012+A1:2015
05
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.comChemical/soil Test:
PT-CON- 21-106
400 $ March
01 September Determination of pH Value of Soil
BS 1377:1990 Part 3 Amd. 9028- 96 Cl. 9 BS 1377:Part 3 2018 Cl 12
PT-CON- 21-107
Determination of the Sulphate Content of Soil
400 $ March (Water Extract & Acid Extract)
02 September BS 1377:1990 Part 3 Amd. 9028- 96 Cl. 5.2/ 5.5 & 5.3/5.5
Chemical/ BS 1377:Part 3 2018 Cl 7.3 / 7.6
BS 1377:Part 3 2018 Cl 7.9 / 7.6
soil Test PT-CON- 21-108
400 $ March Determination of the Chloride Content of Soil
03 September (Water Extract & Acid Extract)
BS 1377:1990 Part 3 Amd. 9028- 96 Cl. 7.2 & 7.3
BS 1377:Part 3 2018Cl 9.2
06
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.comAggregate Test:
PT-CON- 21-102
400 $ March
01 September Determination of Aggregate Crushing Value
BS 812-110:1990
PT-CON- 21-109
400 $ March Flat Particles, elongated particles or flat and
02 September
elongated particles in coarse aggregate
ASTM D 4791-10 / BS 812-150.1:1989 and BS 812 - 105.2:1990
PT-CON- 21-110
400 $ March
03 Determination of shell content-
Aggregate
September
Percentage of shells in coarse aggregates
ASTM D 422-2007 / BS 1377: part2:1990,CL 9.5
Test 04
400 $
March
PT-CON- 21-112
Density, Relative density (Specific gravity)
and absorption of fine aggregates
ASTM C 128-15 / BS 812 Part 2;1995
PT-CON- 21-117
400 $ March
05 Determination of Ten Percent fine value of Aggregates (Dry & Soaked)
BS 812-111:1990, CL 7.1 & 7.2
PT-CON- 21-120
400 $
06 March Resistance to degradation of small and large size aggregate
by abrasion and impact in the Los Angeles Machine
ASTM C 535-16
07
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.comAggregate Test:
PT-CON- 21-124
450 $
07 September Determination of Particle Size distribution(Wet & Dry Sieving)
Section 103.1,CL7.2&7.3 /BS EN
PT-CON- 21-125
400 $ September Determination of Clay Lumps and Friable Particles
08
ASTM C 142 / C 142M-17
Aggregate 09
400 $
PT-CON- 21-132
September Sieve analysis of fine and coarse aggregates
Test ASTM C 136 / C 136 M-14
400 $ PT-CON- 21-135
10 September Determination of Aggregate Impact Value
BS 812-112:1990
08
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.comConcrete Test:
January PT-CON- 21-113
500 $
01 May Determination of Water Absorption on hardened concrete
July BS 1881-122: 2011
January PT-CON- 21-121
400 $
02 May Determination of the initial surface absorption
July
of concrete BS 1881-208:1996
PT-CON- 21-123
400 $ January
03 May Determination of depth of penetration of water
Concrete July under pressure/ Determination of Water Permeability
BS EN 12390-8: 2009/ DIN 1048-5:1991
Test 04
400 $
January
May
July
PT-CON- 21-126
Method for determination of compressive strength
of concrete cubes BS 1881 Part 116 BS EN -12390-3:2009
09
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.comBitumen Test:
PT-CON- 21-114
500 $ June
01 October Determination of Ductility of Bituminous Materials
ASTM D 113-07
PT-CON- 21-115
500 $ June
Determination of Penetration of Bituminous Materials
Bitumen
02 October
ASTM D 5 -2013
Test 03
500 $ June
PT-CON- 21-116
Determination of Softening Point of Bitumen
October
ASTM D36/D36M- 14e1
10
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.comAsphalt Test:
PT-CON- 21-118
400 $
01 February Standard Test Methods for Quantitative Extraction of Bitumen
From Bituminous Paving Mixtures ASTM D2172 / D2172M-17
PT-CON- 21-119
400 $
February Standard Test Methods for Mechanical Size Analysis
Asphalt
02
of Extracted Aggregate ASTM D 5444 – 15
Test 03
400 $ February
PT-CON- 21-131
Standard Test Method for Theoretical Maximum
April
Specific Gravity and Density of Bituminous
Paving Mixtures ASTM D2041/ D2041M-11
11
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.comChemical- Ground Water Test:
PT-CON- 21-128
400 $ April
01 December Determination of the Chloride Content of Ground Water
BS 1377:1990 Part 3 Amd. 9028- 96 Cl.7.2
Chemical- 02
400 $ April
December
PT-CON- 21-129
Determination of the Sulphate Content of Ground Water
BS 1377:1990 Part 3Amd. 9028- 96 Cl.5.4
Ground
Water Test
PT-CON- 21-130
400 $ April
03
December Determination of the pH value
BS 1377:1990 Part 3 Amd. 9028- 96 Cl. 9 BS 1377:Part 3 2018 Cl 12
12
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.comMETALLIC MATERIALS TESTING PT programs for the year 2021
Steel /Metallic material:
February PT-MET- 21-001
400 $
01 June Bend test
October
ASTM E190 - ASTM E290 - ASTM A370
PT-MET- 21-002
400 $ February
02 June Tensile testing at ambient temperature
October ASTM E8/E8M ASTM A370 BS EN ISO 15630 ISO 6892
AS 1391 BS 4449:2005
Steel / February PT-MET- 21-003
400 $
03 June Vickers hardness test
October
ASTM E92 BS EN ISO 6507
Metallic February PT-MET- 21-004
material
400 $
04 June Rockwell hardness test (HRC &HRB)
October
ASTM E18 BS EN ISO 6508
February PT-MET- 21-005
400 $
05 June Brinell hardness test
October ASTM E10 BS EN ISO 6506
February PT-MET- 21-006
400 $
06 June Notched Bar Impact Testing of Metallic Materials
October ASTM E23 ASTM A370 BS EN ISO 148 AS 1544
13
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.comLoad test:
500 $ PT-MET- 21-013
01 April cast iron
Load Test- Gully tops and manhole tops
made of cast iron BS EN 124-2
PT-MET- 21-014
500 $
02 April steel or aluminum alloys
Load Test- Gully tops and manhole tops made of steel
or aluminum alloys BS EN 124-3
PT-MET- 21-015
500 $
03 April steel reinforced concrete
Load test
Load Test- Gully tops and manhole tops made of steel
reinforced concrete BS EN 124-4
PT-MET- 21-016
500 $
04
April composite materials
Load Test- Gully tops and manhole tops made of
composite materials BS EN 124-5
PT-MET- 21-017
500 $
05 Polypropylen e (PP), olyethylene (PE) or poly(vinyl chloride)
April Load Test- Gully tops and manhole tops made of polypropylene (PP),
polyethylene (PE) or un- plasticized poly(vinyl chloride)
BS EN 124-6
14
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.comChemical composition:
400 $ PT-MET- 21-007
01 April Carbon and low alloy Steel: Determination
December
of chemical composition of using Spark
optical Emission Method ASTM 415
PT-MET- 21-008
400 $ April
02
December Stainless steel :Determination of chemical composition
of using Spark optical Emission Method ASTM E1086
PT-MET- 21-009
400 $
03 December Cast Iron: Determination of chemical composition
Chemical of using Spark optical Emission Method
ASTM E1999
composition 400 $
PT-MET- 21-010
04
December Cupper alloys: Determination of chemical composition
of using Spark optical Emission Method
BS EN ISO 15079
400 $ PT-MET- 21-011
05 April Aluminum alloys: Determination of chemical composition
December
of using Spark optical Emission Method
ASTM E1251
15
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.comNon-Destructive Testing (NDT) PT programs for the year 2021
Non Destructive testing:
PT-MET- 21-301
800 $
01 December Standard Practice for Liquid Penetrant Examination for
General Industry ASTM E165/E165M/ ASME 0 Sec. V
PT-MET- 21-302
800 $
02 December Standard Guide for Magnetic Particle Testing
ASTM E709/ ASME 0 Sec. V
Non 03
800 $
December
PT-MET- 21-303
Determination of ultrasonic pulse velocity
Destructive BS EN 12504 Part 4
Testing
16
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.comCustomized PT Programs PT programs for the year 2021
Customized PT Programs:
We provide customized PT programs according to the needs of your lab scope of testing which comply with the
international requirements of ISO/IEC 17043 and ISO 13528 in the following scope of testing:
• IG can customize PT programs according to our customer request.
• Customer can select any test and we will customize this program.
• Customer will define the date of this customized program and will get samples at the defined date.
• Cost of Customized Program is USD 800$/test
01. 02.
Precious Metals Minerals Testing
Testing
08. 03.
Polymers testing Metals testing
07. 04.
Glass testing Textile testing
06. 05.
Ceramic & tiles Paints testing
testing
17
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.com1 Totally understands
your needs
2 Saving your Money
and Time
WHY YOU
CHOOSE PT
3
On Time with Accurate
Reports
FROM IG:
4
High Quality and
Well-controlled Samples
5 24/7 is our service
18
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.comSATISFACTORY RESULTS PACKAGE:
The lab participates in the PT with satisfactory results will receive a formal certificate of Success in
PT program issues by IG.
Registration for PT program
• Registration deadline for each programs is 20 days prior to dispatching of samples date.
• For registration in a PT program please contact us at: pt@inspeedglobal.com or via our website
www.inspeedglobal.com
Shipping:
Rates mentioned here are including the packaging cost but excluding the shipping charges. The
actual cost of shipping will be paid by the participant along with PT fees.
IG Main Worldwide Offices are in:
Florida, USA
Birmingham, England
Göteborg, Sweden
Istanbul, Turkey
Doha, Qatar
Cairo, Egypt
Dubai, UAE
Muscat, Oman
19
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.comABOUT US
IG main strategic view is based on:
IG Vision:
To be one of the best and leading conformity
Inspeed Global – IG, is a worldwide conformity
assessment companies in the world specially in
assessment company that provides a wide range
Proficiency Testing – PT, Personnel Certification
of services including; and Inspection.
1- Proficiency Testing – PT,ISO/IEC 17043:2010 IG Mission:
2- Inspection, Inspeed Global – IG – is a worldwide company that
3- Personnel Certification, has international offices in different regions and
working under the values of Accuracy, Speed,
4- Management System Certification,
Integration & Collaboration and Transparency, to
5- Halal Certification,
deliver to its valuable and honorable customers the
6- Training, services of conformity assessment that includes;
7- Business Solutions and Proficiency Testing – PT, Inspection, Personnel
8- Quality Software. Certification, Management System Certification,
Halal Certification, Training, Business Solutions
IG offices and collaboration agreements are
and Quality Software.
covering the whole regions of the world, for our
IG Values:
main purpose is to be close to our customers
1- Accuracy
everywhere.
2- Speed
3- Integration & Collaboration
IG Message: 4- Transparency
Once Certified .. Globally Recognized
20
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.comFor contact, register and any inquiry:
www.inspeedglobal.com E-Mail: pt@inspeedglobal.com
Int. Marketing & Customer Relations:
+46 7 37 38 39 10 (Call & WhatsApp) +90 553 775 1648 (Calls)
English and Arabic conversations are available
+46 7 37 38 39 10
+90 553 775 1648
21
@InspeedGlobal www.inspeedglobal.com +46 7 37 38 39 10 info@inspeedglobal.comYou can also read
