April 2021 Week of April 4-April 10 - Shelby County Job and Family Services
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
April 2021
Week of April 4—April 10
The “OhioMeansJobs Shelby County AREA JOB POSTINGS” summary is being updated weekly. In addition to being posted on
our Facebook page, the summary is also posted on our website at www.shelbycountyjfs.org.
Even though our lobby is closed to the public, we are available to assist you with your job search. Call us at 937-498-4981
ext. 2816 or select option 5 and then option 6 from the phone menu. You may also reach us by emailing us at EFS-
Staff@jfs.ohio.gov
OhioMeansJobs Shelby County is a proud partner of the American Job Center Network.
Probation Officer/PSI Writer
Company: Shelby County Common Pleas Court
Search: Job Location: Sidney, Ohio
Ohiomeansjobs Shelby County Address: Steven J. Tostrick, MPH, REHS, RS,
Health Commissioner, Shelby County Common
Pleas Court, Court Administrator, PO Box 947,
Sidney, Ohio 45365
Education Requirement: A degree in criminol-
ogy, social sciences, psychology or related field
required.
Job Duties: Responsibilities include preparing
pre-sentence investigations, judicial release and
ILC reports and working with social service
agencies and law enforcement.
To apply: Submit resume to: Steven J. Tostrick,
MPH, REHS, RS Health Commissioner Sidney-
Shelby County Health Department 202 W. Poplar
St. Sidney, OH 45365 (marked confidential) OR
email:
steven.tostrick@shelbycountyhealthdept.org
Deadline to apply: April 21, 2021 Approximate
start date: June 1, 2021
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (1)
April 2021
Week of April 4—April 10
Sr./Lead Supplier Quality Engineer
Company: Emerson
Job Location: Sidney, Ohio
Qualifications Desired: Ability to travel up to 15%, including international. Legal authorization to work in the
United States - Sponsorship for this role will not be provided. PREFERRED EDUCATION, EXPERIENCE &
SKILLS: Electrical Engineering degree w/ 7+ years experience or equivalent combination. Experience working
in a medium to high volume manufacturing environment. Quality Certifications in ASQ (CQA, CQE, CSQP).
Knowledge of electronics and electrical component (caps, relays, contactors, wire harnesses, motors, etc.)
manufacturing best practice
Education Requirement: Bachelors degree with 5 years of relevant work experience or equivalent combina-
tion (Co-op experience considered)
Job Duties: If you are an Engineering professional looking for an opportunity to grow, Emerson has an excit-
ing opportunity for you! Based in our Sidney, Ohio location, you will support electrical components, electronic
devices and integrated solutions. you will be responsible for the overall quality performance of supplied com-
ponents within your assigned commodities. You will evaluate new and existing suppliers and implement im-
provements as needed. Support New Product Development (NPD) teams with technical assessments of sup-
plier processes, and by providing input to product design for ease of manufacturing (DFM). You will also lead
the Production Part Approval Process (PPAP) for your commodities. AS A SR/LEAD SUPPLIER QUALITY
ENGINEER, YOU WILL: Work cross-functionally with Engineering, Operations and Purchasing to ensure prop-
er designs, suppliers, and manufacturing processes are selected. Use quality tools such as PPAP, APQP,
Control Plans, Process Flow charts, PFMEA, Gauge R&R, SPC, 8D, etc. Evaluate new suppliers and monitor
the existing supplier base by leading audits using established tools. Assess adequacy of supplier technical
ability and process capability to produce ECT components and assemblies. Support NPD teams through par-
ticipation in DFMs, print reviews, and supplier assessments. Lead PPAP activities to ensure supplier process-
es are robust and capable. Monitor supplier quality performance and lead continuous improvement initiatives.
Lead problem solving activities when issues with supplied components are identified. Travel 10-15% to suppli-
er sites for quality audits and process reviews (includes potential International trips
To apply: Apply online at: www.emerson.com/careers; Reference Code: 21003378
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (2)
April 2021
Week of April 4—April 10
Laser Operator-3rd Shift
Company: Brown Industrial, Inc.
Job Location: Botkins, Ohio
Qualifications Desired: Skills and Abilities: Ability to read and interpret blueprints. Ability to multi-task and
prioritize in a fast-paced environment. Working knowledge of metal materials. Mechanically-inclined. Must be
punctual and dependable. Ability to work independently or as part of a team.
Education Requirement: High School
Job Duties: This position is responsible for the daily setup and operation of one or more CNC lasers and/or
waterjet by performing the following duties: Perform daily machine startup and shutdown procedures on
equipment. Stage raw materials at each work-center for the day’s production. Load and unload machines.
Ensure production schedule follow through as allocated by Supervisor. Assist in loading and unloading team
members’ machines when production requires additional manpower to maintain throughput. Perform minor
maintenance and cleaning of cutting equipment and work area in accordance with company standards and
manufactures machine recommendations. Perform some machine alignment procedures and optic cleaning
to keep equipment at peak operating performance. Facilitate work-order paper flow in accordance with quali-
ty standards. Detect and report defective materials or questionable conditions to Supervisor. Follows all
workplace rules. Completes all paperwork neatly and accurately. Other duties as assigned.
To apply: Email resume to carrie@brownindustrial.com
Welder (MIG/Pulse)
Company: Brown Industrial, Inc.
Job Location: Botkins, Ohio
Qualifications Desired: Strong mechanical aptitude. Must have a working knowledge of metal materials.
Able to read and work off of blue prints. Able to work on multiple projects in a fast-paced environment. Able
to stay on-task without supervision. Ability to stay focused when doing repetitious work. Complete tasks from
beginning to end. Proven track record of dependability and punctuality. Strong communication skills and able
to work as part of a team.
Job Duties: MIG/Pulse welding of fixtured parts to make single assemblies. Weld parts in various angles:
flat, horizontal, vertical, or overhead. Fixture weld various assemblies from oral directions, sketches, draw-
ings and blueprints. Develops layout and plans sequence of operations. Sets up and operates hand and
power tools. Operates forklift and overhead cranes. Follow safety guidelines and demonstrate safe work
practices. Other duties as assigned.
To apply: Email resume to carrie@brownindustrial.com
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (3)
April 2021
Week of April 4—April 10
Automation Engineer
Company: Emerson
Job Location: Sidney, Ohio
Qualifications Desired: A minimum of two (2) years of experience in an Engineering Environment. Good or-
ganizational, project management, and presentation skills to interact with all levels within the organization and
with suppliers and vendors. Ability to communicate effectively and be an agent for change. Ability to manage
multiple projects in a fast paced engineering environment. Experience and working knowledge of PC applica-
tions and Microsoft Office Products. Ability to travel up to 25% of the time. Legal Authorization to work in the
United States - Sponsorship will not be provided for this role. PREFERRED EDUCATION, EXPERIENCE &
SKILLS: Seven (7) or more years experience in a manufacturing environment. Ability to recognize and solve
complex problems in automation system design. Background in high speed automation processes including
high-speed vision guidance. Experience in root cause analysis. Implementation experience with Poke-Yokes.
Experience in controls including PLC, HMI, VFD & Servo Drive programming. Experience in industrial robotics
(6-Axis, SCARA, or delta style robots). Strong understanding of general safety, electrical safety, ergonomics.
Knowledge or experience with a programming language strongly preferred. Prior Emerson work experience.
Education Requirement: Bachelor of Science Degree in Mechanical/ Manufacturing Engineering, Mechanical/
Manufacturing. Engineering Technology, Electrical Engineering or Industrial Engineering. Associates degree
with equivalent work experience would also be considered.
Job Duties: If you are an Automation Engineer professional looking for an opportunity to grow, Emerson has
an exciting opportunity for you! Based in our Sidney, Ohio location, you will work inside the corporate ad-
vanced manufacturing engineering (AME) department designing and delivering sustainable automation solu-
tions that optimize cost, capital investment and system performance. You will conceptualize, generate, and pro-
pose initial design concepts in a collaborative environment. In addition you will deliver detailed automation sys-
tem designs, perform hands-on integration, and validate the system meets specified performance on the shop
floor. AS AN AUTOMATION ENGINEER, YOU WILL: Design and deliver sustainable automated robotic sys-
tem solutions that optimize cost, capital investment and system performance. Work closely with Controls Engi-
neering personnel on integration of Robotic systems to process machines. Lead design reviews in a team envi-
ronment and possess the ability to assess proposed designs to meet specified requirements and manufactura-
bility. Apply lean manufacturing principles and processes to system solutions. Follow development processes
that have been established to meet project schedule milestones. Coordinate standardization of robotic related
production tooling with process engineers. Coordinate efficient transfer of robotic programs between production
lines. Draft and design layout of equipment, materials, and workspace to optimize efficiencies, using CAD or
simulation application tools. Ensure all robotic equipment and production related equipment meet all safety
standards within designated ANSI and RIA requirements.
To apply: Apply online at: www.emerson.com/careers; Reference Code: 20009253
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (4)April 2021
Week of April 4—April 10
Production Operator-Rotating 12 hour shifts
Company: Advanced Composites
Job Location: Sidney, Ohio
Job Duties: The Production Operator is responsible for coordinating the flow of raw materials, maintaining the
performance of the production line, and monitoring the condition of the finished product. The Production Operator
may also be required to perform other duties as assigned by direct supervision, including team leader, supervisor
or manager. Train and instruct any and all employees assigned to their particular production process. Maintain
ongoing inspection of product and process for conformity to requirements. Monitor instrumentation and extrusion
processes. Assure that all production and quality reports relative to job are completed properly. Verify that finished
goods packaging is correct. Assist with routine maintenance as required. Stop production when extruders, or ex-
trude support systems, fail to meet product requirements, and for product (color/quality) testing. Be supportive of
continuous improvement activities. Weigh materials or products and record weight on tags, labels, or production
schedules. Load or unload materials onto or off of pallets, skids or lifting device. Transfer weighed materials to
production or storage areas. Work at different work stations as production needs require. Assure proper set-up of
extruder and support systems, and start-up of machine relative to instructions on the work order and job work in-
structions. Maintain cleanliness of work area to ensure a safe, non-contaminated work place. Is aware of signifi-
cant impacts, associated impacts, and the legal requirements that are inherent with acquired duties. Is aware of
his/her individual Quality, Environmental & OH&S obligations. Ensure that self and all co-workers comply with
TS16949, ISO14001 & OHSAS18001 management system requirements. Ensure that all co-workers comply with
all Advanced Composites, Inc. and OSHA safety standards in place at this worksite.
To apply: Apply online at: www.indeed.com or https://www.indeed.com/viewjob?
jk=a51a8720515f738b&tk=1f21m1vjlu3sh800&from=serp&vjs=3
General Labor/Finishing Department
Company: Tooling Technology, LLC
Address: 100 Enterprise Dr. Fort Loramie, Ohio 45845
Qualifications Desired: Self-motivated ·Proven track record of dependability & punctuality· Use of Basic Hand
tools ·Strong Mechanical aptitude· Pays attention to details Prior experience is helpful but not necessary. Pre-
ferred skill (not required) · Welding· Operating plasma cutter ·Soldering ·Operating a forklift and crane
Education Requirement: High School Diploma or GED
Job Duties: Tooling Technology is currently looking for new team members to work a full-time position in our
Mold Finishing Department. We have both 1st and 2nd shifts available ·Drilling /Venting in detailed areas on
molds ·Closing molds & attaching rails ·Soldering copper / water manifolds ·Fabrication of steel frames. Both 1st
and 2nd shifts available. Hours of work: full-time (40-50 hours per week). Shift hours range from: 1st (6AM-2PM)
(6AM-4PM) 2nd shift (3PM-11PM) (3PM-1AM).
To Apply: Email: kdrees@toolingtechgroup.com or in person
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (5)April 2021
Week of April 4—April 10
Parts Counter Representative
Company: Buckeye Ford
Job Location: Sidney, Ohio
Qualifications Desired: Sales Experience: 1 year (Preferred), Inventory Control: 1 year (Preferred), Multilin-
gual (Preferred), Driver's License (Preferred), ASE Certification (Preferred),
Education Requirement: High school or equivalent (Preferred)
Job Duties: Buckeye Ford is looking to hire a full-time parts counter representative. Duties will include looking
up parts via a computer, charging parts out, inventory control, and interaction with customers and technicians.
To apply: Apply online at: www.indeed.com or https://www.indeed.com/viewjob?cmp=Buckeye-
Ford&t=Part+Counter+Representative&jk=91c5799dcf529b06&sjdu=Zzi_VW2ygsY1fzh3Ma9ZsE4zIT1NTXCw
gFBhdjeTC3PY-
8fMYzrQREwa24sCgz7dga5XY1qECLJ1hq1odtKwAw&tk=1f21m1vjlu3sh800&adid=366384278&ad=-
6NYlbfkN0ABSqrYeIH4HcSnhf3cV9GEV1WKPJU6P_IPmEV6aep6a9zmqb1Q46c6PRzjzMJFNfHThJskm5-
UMW9DAyV3gLfihRT3wUn-
mqi__97Xr22ROH2tzf5T7q2EnkGRelYR5AHvBRYZixIBbi8NknwOvY8oV3T1LuAkwJNOFzspvkGiFfwB__6mef
qKHMZrZJW6MM_DFYfds8glH_A-MYps6tGC0Pfnn1O52TPTreAMz7qHwNPgqPlwRMJwz-
6YssYuX9SRrUukA1MSTlDr31xCHqzRGwSFVrf-RacxFXDFRaMSbI-lfgq_IvB-yNAffS1FjyIU5fAL4YiTPvQ%
3D%3D&pub=4a1b367933fd867b19b072952f68dceb&vjs=3
Laborer
Company: Francis Manufacturing
Job Location: Russia, Ohio
Qualifications Desired: Must be able to lift 70 lbs. on a frequent basis. Must be able to stand, bend, and twist
as part of the job function. Must be able to work in a hot environment while performing physical labor. Math
skills are a plus.
Job Duties: New hires typically begin employment at the “shake out” position. Shake out associates are
“molders helpers” in the foundry area and work closely with the molder to assist them with creating a structural-
ly sound sand mold and are responsible for unearthing castings from the mold after molten aluminum has been
poured and solidified. After adequate training, shake out associates are provided with advancement opportuni-
ties to transition over to our “pour off” or “mold” positions. Our foundry area is where castings are created and
is the heart of our business. All quality castings begin with sound foundry practices. Periodically, there may be
open positions available on the second shift for grinders in our Grind Department.
To apply: Apply online at: https://www.francismanufacturing.com/jobs/
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (6)April 2021
Week of April 4—April 10
Mechanical Technician (Weekend Shift)
CNC Machining Technician
Company: Emerson
Company: Emerson
Job Location: Sidney, Ohio
Job Location: Sidney, Ohio
Qualifications Desired: Must have basic mechanical,
Qualifications Desired: Knowledge of basic ma-
HVAC, and electrical/electronic Skills. Must have trouble-
chining practices. Basic understanding of gaging
shooting and problem solving skills. Must have personal practices. Strong analytical and technical skills.
computer skills and experience with Microsoft Office pro- Ability to perform machine coordinator and gage
grams. Legal work authorization in the United States - operator duties. Knowledge of Microsoft Office.
Sponsorship will not be provided for this position. PRE- Team player with strong interpersonal skills and
FERRED EDUCATION, EXPERIENCE & SKILLS: Associ- the ability to communicate effectively with peers,
managers, and hourly workforce. Ability to flex
ates Degree plus 1 year of experience or equivalent combi- work schedule based on needs of operation.
nation of education and work experience. PREFERRED EDUCATION, SKILLS AND EX-
PERIENCE: CNC machining experience in pro-
Education Requirement: High School Diploma plus 2-3
duction environment. Automation experience with
years of experience or equivalent combination of education robotics in production environment .
and work experience.
Education Requirement: Associate or Technical
Job Duties: If you are a Mechanical Technician profession- Degree and (1) year of related experience or
al looking for an opportunity to grow, Emerson has an excit- equivalent combination of education and experi-
ing opportunity for you! Based in our Sidney, OH location, ence
you will work in conjunction with product and research engi-
Job Duties: Be accountable for safety, quality,
neers to design, develop, and qualify compressors for resi-
cost, and production goals while running the line.
dential and commercial air conditioning systems. To main-
Start-up and operation of CNC equipment, auto-
tain our role as a global leader of compression solutions we
mation equipment and gaging equipment. Re-
continually seek talented and ambitious technicians to work
view gage traces, analyze and make needed off-
in our engineering laboratories. We are seeking a 1st shift
sets in machines. Change inserts, drills, and
laboratory technician to contribute to our growth and contin-
endmills. Conduct PM's on tool work-holding,
ued innovation. AS A MECHANICAL TECHNICIAN, YOU
change when needed. Perform model changes.
WILL: Follow engineering laboratory test instructions to per-
Conduct initial troubleshooting of production is-
formance test compressors. Set-up and install compressors
sues and repair if capable. Maintain uninterrupt-
and supporting compressor electronics for test purposes.
ed product flow through the line. Take direction
Operate laboratory test equipment including calorimeters,
from and collaborate with leadership to mitigate
mass flow stands, data acquisition systems, and other
downtime. Actively participate in GEMBA walks
measuring equipment used to acquire compressor perfor-
(whiteboards). Actively engage and participate in
mance characteristics. Fabricate supporting test fixtures
5S and Kaizen events and help identify improve-
and controls required for non-standard tests. Review test
ment opportunities. Direct hourly employees
data for compliance with applicable test data standards.
working within the area. Perform machine coordi-
Perform various tasks related to the upkeep of the lab.
nator and gage operator duties as needed.
To apply: Apply online at: www.emerson.com/careers; Ref-
erence Code: 21003055 To apply: Apply online at: www.emerson.com/
careers; Reference Code: 20007492
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (7)April 2021
Week of April 4—April 10
Charge Nurse-LPN
Company: Ohio Living Dorothy Love
Address: 3003 West Cisco Road Sidney, Ohio 45365
Qualifications Desired: One year of clinical experience in a hospital, long term care facility, or oth-
er related health care facility preferred. Supervisory experience in a long-term care, hospital, or oth-
er related healthcare setting preferred. Must be able to read, write, speak, and understand the Eng-
lish language. Proficiency with electronic medical records (EMR) preferred.
Education Requirement: Current unencumbered license for the state of Ohio to practice as a Li-
censed Practical Nurse (LPN).
Benefits Offered: Access to the campus wellness center, indoor track, library, video nook, and
walking trails throughout our 294 acres of beautiful countryside. Depending on an employee’s full-
time, part-time or PRN status, they may benefit from: competitive wages; affordable medical, dental,
and vision insurance; 403b retirement savings; paid time off including your birthday; training, contin-
uing education, and education assistance; pay advances up to $500; free meals/meal allowance; the
latest technology; unlimited career opportunities and much more!
Job Duties: The Charge Nurse - LPN supervises the day-to-day nursing activities of the State Test-
ed Nursing Assistants (STNA) in accordance with company standards and federal, state, and local
standards, guidelines, and regulations to ensure that the highest degree of quality care is main-
tained at all times. • Ensures that nursing procedures are followed by nursing service personnel, and
that they reflect the day-to-day nursing care procedures used by the facility. • Participates in the
maintenance and implementation of the facility’s quality assurance program. • Ensures the proce-
dures for the administration, storage and control of medications and supplies are being followed by
nursing staff. • Ensures that resident rooms, treatment areas, work areas and equipment are main-
tained in a clean, sanitary, and safe manner. Weekend shift positions and Afternoon positions cur-
rently available.
To Apply: Apply online: https://www.ohioliving.org/
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (8)April 2021
Week of April 4—April 10
Project Manager/Estimator
Company: Sollmann Electric Company
Job Location: Sidney, OH
Address: 310 East Russell Road Sidney, OH 45365
Qualifications Desired: Computer literacy is required and CAD experience is preferred.
Education Requirement: Educational and experience requirements include: 4-year degree in electrical tech-
nology or electrical engineering; or completion of a qualified electrician apprenticeship program; or equivalent
training and/or experience (5-10 years). Ability to coordinate and supervise a group work effort.
Job Duties: A Project Manager/Estimator will: Prepare and complete estimates for assigned project(s) ranging
in size and complexity from small to large. Review proposal specifications, drawings, attend pre-bid meetings,
etc. to determine scope of work and required contents of estimate. Coordinate the identification of items and
information needed for bid preparation. Utilize computerized estimation software and follow the company’s
“Estimate Procedures Checklist”. Follow awarded contracts as assigned potentially estimating extra work items,
change orders, credits, procuring material, etc., and overall management direction for field projects. Review and
analyze task code reports of actual cost vs. estimated cost and assume additional responsibilities per supervi-
sor direction. The ideal candidate will be a business-oriented person with superior communication and interper-
sonal skills (tact, diplomacy, influence, etc.) and an interest and ability to estimate all types of projects/
contracts.
To Apply: Apply online at: https://sollmannelectric.com/apply-online/ or in person at Sollmann Electric Co., 310
E. Russell Road, Sidney, OH 45365, Monday-Friday, 8:00 am-4:00 pm. You may call for additional information
at 937-492-0346
Electricians
Company: Sollmann Electric
Address: 310 East Russell Road, Sidney, Ohio 45365
Qualifications Desired: No experience needed, we will provide training!
To Apply: Apply online at: https://sollmannelectric.com/apply-online/ or in person at Sollmann Electric Co.,
310 E. Russell Road, Sidney, OH 45365, Monday-Friday, 8:00 am-4:00 pm. You may call for additional infor-
mation at 937-492-0346. Go to https://sollmannelectric.com/careers/ and watch the videos to learn more
about becoming an Electrician at Sollmann Electric.
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (9)April 2021
Week of April 4—April 10
Mechanical Technician
Company: Emerson
Job Location: Sidney, Ohio
Qualifications Desired: Experience with compressor systems used in Refrigeration or Air Conditioning appli-
cations. Excellent Mechanical, HVAC, electrical or electronic skills. Excellent verbal and written communica-
tion skills. Excellent computer skills. Legal Authorization to work in the United States - Sponsorship will not be
provided for this role. PREFERRED EDUCATION, EXPERIENCE & SKILLS: Associates Degree (Mechanical
Engineering or HVAC) plus 1 or more years of experience or equivalent combination of education and experi-
ence. Experience setting up and supporting large multi-faceted complex projects impacting the company.
Education Requirement: HS Degree plus 2-3 years of experience or equivalent combination of education
and experience.
Job Duties: If you are a Technician professional looking for a new opportunity to build your career, our loca-
tion in Sidney, OH has a new opportunity for you! As a Mechanical Technician, you will perform non-routine
and complex assignments involving Performance and Unit Testing in the Product Evaluation Labs. You will
communicate effectively to ensure a smooth flow of information regarding projects, priorities, changes and
problems. You will also use your excellent initiative and judgment to improve work flow, equipment utilization
and efficiency of the department. AS A MECHANICAL TECHNICIAN, YOU WILL: Set up, test and evaluate
compressors with minimal supervision. Work from operational, manual and verbal instructions. Operate labor-
atory testing equipment with a focus on Performance and Unit test stands. Adhere to all corporate and labora-
tory safety standards and policies. Have advanced analytical and troubleshooting skills. Exhibit advanced
knowledge of compressors, systems, electrical power and associated lab equipment. Have strong written and
verbal communication skills. Have excellent organizational skills. Work with manipulation of average to heavy
weights (up to 50 lbs.), standing for extended periods of time, use of hand tools and brazing equipment. Work
with, train and mentor other technicians in a team environment.
To apply: Apply online at: www.emerson.com/careers; Reference Code: 210002535
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (10)April 2021
Week of April 4—April 10
Logistics Manager
Company: Advanced Composites
Job Location: Sidney, Ohio
Qualifications Desired: Valid driver license. Strong skills in time management, math & statistics, analytics,
and problem solving. Means and ability to work remotely as well as in open office setting. Ability to lead and
thrive in collaborative team environments. Professional written and verbal communication skills. Technical
Skills and Knowledge: List specific machinery, computer programs and other special skills and knowledge
required. Fluent in core Microsoft Office applications. Complete understanding of interrelationships in busi-
ness system. Create simple to complex analytical reports. Complete management training for Safety / Lead-
ership Programs.
Education Requirement:
Job Duties: The Logistics Manager oversees the means to move, distribute, and store materials. This posi-
tion is responsible for inbound & outbound freight carrier selection, on-boarding, and includes contract man-
agement and negotiation. The person in this position actively collaborates with distribution facility manage-
ment, transportation companies, and relevant technology companies. The incumbent will lead and partici-
pate in supply chain related projects. In addition to these duties, the person in this role will seek to optimize
the supply chain through internal, supplier or satellite distribution warehouses. Essential Duties and Re-
sponsibilities: List accountabilities and where possible the measurable result of the activity. Seek out and
work to establish cost effective solutions for RM and FG transportation. Manage and report on Transporta-
tion & Logistic projects. On-boarding of carriers and logistical partners. Collaborate with distribution center
management to affect the intended logistical plan. Document the plans accordingly. Monitor and report
compliance to the logistical plan, and contractual requirement stipulations such as insurance and FMCSA
scores. Pricing management, Contract Management, and data management. Develop, trend, manage and
report carrier score cards. Stays abreast with industry changes, including regulations that may impact the
organization. Write and maintain work instructions and procedures as needed. Ensure training to work in-
structions is effective and complete. Investigate and report opportunities in the supply chain. Provide period-
ic analysis of freight and distribution. Design department analytical reports and / or information. Is aware of
the significant impacts, associated impacts, & the legal requirements that are inherent with acquired duties.
Is aware of his/ her individual Quality, Environmental & OH&S obligations. Ensure that all co-workers com-
ply with TS16949, ISO14001 & OHSAS 18001 management system requirements. Ensure that all co-
workers comply with all ACP and OSHA safety standards in place at this worksite. Other tasks as assigned
by supervisor.
To apply: Apply online at: www.indeed.com or https://www.indeed.com/viewjob?
jk=70a20d337182c329&tk=1f21m1vjlu3sh800&from=serp&vjs=3
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (11)April 2021
Week of April 4—April 10
Sr. Quality Engineer
Company: Emerson
Job Location: Sidney, Ohio
Qualifications Desired: Seven (7) years of Electro-Mechanical manufacturing experience. At
least 5 years of quality experience. Excellent communication skills. Experience with medium to
high volume production. Proficient with Microsoft applications: Excel, Power Point and Word.
Working knowledge of Minitab, Statistics or other statistical software. Familiar with use of ERP
system such as Oracle or similar. Familiar with use of Product Lifecyle Management systems
such as Team Center or Agile. Ability to travel up to 25% of time. Legal authorization to work in
the United States - Sponsorship will not be provided for this role. PREFERRED EDUCATION,
EXPERIENCE & SKILLS: Ten (10) or more years of relevant work experience in Electro-
Mechanical manufacturing experience. ASQ CQE certification. Lean Six Sigma Black Belt Certifi-
cation.
Education Requirement: B.S. in Manufacturing, Mechanical, Controls or Electrical Engineering.
ASQ, or equivalent, Green Belt Certification.
Job Duties: If you are a Quality Assurance & Control professional looking for an opportunity to
grow, Emerson has an exciting opportunity for you! Based in our Sidney, OH location, you will be
responsible for leading quality assurance and quality control efforts associated with compressor
products for the Heating and Air Conditioning business within the Emerson Climate Group. You
will be responsible for working with cross-functional groups in the development of new products
and support of existing products. AS A SR. QUALITY ENGINEER, YOU WILL: Collaborate with
cross functional groups and teams and provide quality guidance and support for new and existing
product. Develop quality processes, systems and methods associated with non-compressor, elec-
tro-mechanical products and sub-systems. Process optimization. Validation of protype and pro-
duction processes and methods. Validation of prototype and production gages and instrumenta-
tion. Generation of quality plans. Generation of quality standards and specifications. Data collec-
tion and analysis. Measurement system analysis. Develop and present technical updates to cross
functional teams, business unit leaders and customers. Development of Process and Value
Stream maps. Development of PFMEAs. Development of Control Plans. Review and approval of
PPAP documentation. Lean Six Sigma problem solving.
To apply: Apply online at: www.emerson.com/careers; Reference Code: 21001885
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (12)April 2021
Week of April 4—April 10
Part-Time Sales Associate
Company: Sherwin-Williams
Job Location: Sidney, Ohio
Qualifications Desired: Must be at least 18 years of age. Must be legally authorized to work in country of em-
ployment without sponsorship for employment visa status. Must be able to retrieve material from shelves and
floor stacks and lift and carry up to 50 lbs. Must be able to tint paint, therefore, must be able to distinguish the
difference between colors. Must be able to operate a computer and communicate via the telephone. PRE-
FERRED QUALIFICATIONS: Prior experience in a sales or customer service position. Customer service skills,
including problem solving and handling customer complaints. Good written and verbal communication skills. A
valid driver's license.
Education Requirement: High school diploma or comparable certification (e.g. GED).
Job Duties: Here, we believe there’s not one path to success, we believe in careers that grow with you. Who-
ever you are or wherever you come from in the world, there’s a place for you at Sherwin-Williams. We provide
you with the opportunity to explore your curiosity and drive us forward. We’ll give you the space to share your
strengths and we want you to show us what you can do. You can innovate, grow and discover in a place where
you can thrive and Let Your Colors Show! Sherwin-Williams values the unique talents and abilities from all
backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with
disabilities and Protected Veterans. This position is responsible for supporting the sales efforts at a Sherwin-
Williams paint store, servicing wholesale and retail customers. It will assist customers in person and over the
phone by determining needs and presenting appropriate products and services. This involves ensuring that
sales transactions are completed accurately, maintaining accurate work order files and formulas, pulling appro-
priate products from the sales floor or warehouse, and tinting and mixing them to customer specifications. This
position will also stock shelves and set up displays, clean store equipment, and load and unload trucks. It may
also assist in making deliveries if necessary.
To apply: Apply online at: www.indeed.com or https://www.indeed.com/viewjob?
jk=9f804445da10d186&tk=1f21m1vjlu3sh800&from=serp&vjs=3
Kindergarten Teacher
Company: Holy Angels Catholic School
Job Location: Sidney, Ohio
Qualifications Desired: Qualified candidates must possess the following characteristics: Excellent content
knowledge. Demonstrate ability to use data to drive instruction. Creative and energetic personality. Be an educa-
tional leader and team player. Strong communication skills. Ability to build and maintain student and community rap-
port. Practicing Catholic required (Will be teaching religion). Must have fingerprints, background check, and VIRTUS
current with the Archdiocese of Cincinnati prior to starting the position in August.
Education Requirement: Bachelor's Degree in Education
To apply: Holy Angels Catholic School is looking for a Kindergarten teacher for the 2021-2022 school year. Candi-
dates should apply to Janel Slonkosky by April 12, 2021. Please send cover letter, resume, and references to
jslonkosky@holyangelscatholic.net
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (13)April 2021
Week of April 4—April 10
Product Manager, CO2 Cold Chain
Company: Emerson
Job Location: Sidney, Ohio
Qualifications Desired: Minimum five (7) years related work experience in product management, project man-
agement, marketing, sales, or engineering occupation. Proven track record in managing with the founder's men-
tality and owner's mindset, with full accountability, high-level autonomy, and holistic perspective. Strong quant
and analytical abilities to use data to develop strategies and make decisions, but do not suffer from analysis pa-
ralysis; must have a proven track record of robust delivery. Must have entrepreneurial skills to quickly turn ideas
into actions, operate in a customer-centric way, take risks, and accomplish results through others. Commercial
development and marketing expertise in B2B environments that led to business growth. Must possess the ability
to lead cross-functional teams and effectively communicate and present information to customers, stakeholders,
and top management. Ability to travel 25%-30% of the time. Legal authorization to work in the United States -
Sponsorship will not be provided for this role. PREFERRED EDUCATION, EXPERIENCE & SKILLS: Master's
degree in Business Administration. Experience in Transportation Cold Chain and/or other Cold Chain industries,
working directly with original equipment manufacturers, designers/consultants, wholesalers, contractors, and/or
end-user customers. Experience with Cold Chain CO2. Expertise in product portfolio planning and product de-
velopment processes, from discovery to testing and launch. Demonstrated strong financial modeling and fore-
casting skills, and professional proficiency with Microsoft Office.
Education Requirement: Bachelor's degree or foreign equivalent in Engineering, Marketing, or Business
Job Duties: Own the Semi-Hermetic P&L for the Americas. Ensure organizational alignment on hitting the sales
growth and profitability targets. Participate in executive-level sales and operations planning, resolving opera-
tional challenges related to the lifecycle of existing products and launches of new products. Understand the cost,
quality, warranty, delivery to ensure the short and long-term success of the business. Prioritize new product de-
velopment programs and product lifecycle management efforts based on business opportunities or threats vs.
resource requirements. Oversee execution of plans throughout various phases of the product lifecycle. Collabo-
rate with sales and marketing to build the CO2 and Semi-Hermetic product value proposition and pricing strate-
gy, and the commercialization plan, including go-to-market, customer engagement, promotional materials, prod-
uct presentations, customer bulletins, and marketing collateral. Understand industry trends, market dynamics,
and competition across different markets. Serve as an expert for sales and customers for the jobs they are trying
to accomplish, and problems they face when deploying CO2 and Semi-Hermetic Compression Solutions. Sup-
port customer engagements for the various Semi-Hermetic applications and be the focal point for applications in
CO2. Use market and product knowledge to train multiple groups internally and externally to drive sales growth.
Lead cross-functional teams working closely with Program Management, Marketing, Finance, Quality, Engineer-
ing, Sales, Operations, and Supply Chain for critical integrated market solutions programs. Collaborate with oth-
er Emerson world areas and business groups regarding the product platform, critical global programs, and com-
mon market compression solutions.
To apply: Apply online at: www.emerson.com/careers; Reference Code: 21002035
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (14)April 2021
Week of April 4—April 10
Health Commissioner
Company: Sidney-Shelby County Health Department
Job Location: Sidney, Ohio
Address: 202 W. Poplar Street, Sidney, Ohio
Education Requirement: Per Ohio Revised Code 3709.11, the Health Commissioner shall be a licensed
physician, dentist, veterinarian, podiatrist, chiropractor, or the holder of a master’s degree in public health or
an equivalent master’s degree in a related health field as determined by the members of the Board of Health.
Job Duties: The Health Commissioner is the executive officer of the Board and shall carry out all orders of
the Board and of the Ohio Department of Health. The Health Commissioner enforces all sanitary laws and
regulations in the district. Duties Include: Employ and supervise department staff; manage and administer
environmental health programs and nursing programs including medical and vital statistics; prepare depart-
ment budgets and monitor fiscal affairs; maintain liaison with government and community agencies; direct the
preparation of local, state and federal grants.
To apply: Submit resume to: Steven J. Tostrick, MPH, REHS, RS Health Commissioner Sidney-Shelby
County Health Department 202 W. Poplar St. Sidney, OH 45365 (marked confidential) OR email: ste-
ven.tostrick@shelbycountyhealthdept.org Deadline to apply: April 21, 2021 Approximate start date: June 1,
2021
Assembly/Production Operators
Company: Whirlpool Corporation (KitchenAid)
Job Location: Greenville, Ohio
Qualifications Desired: Must be at least 18 years old or older. 6 months of manufacturing or continuous
employment experience.
Education Requirement: High School Diploma/GED
Job Duties: Work on a moving/conveyor style production line or stabilized workstation. Assemble and install
parts by hand or using tools/equipment. Crating and packaging of materials, parts, products etc. Participate
in training to learn how to follow standard operating procedures (SOP). Ensure the product is handled in a
safe and quality-focused manner. Safely use precision hand and portable power tools and machine shop
equipment. Continuously stand or walk (up to 10 hours per day). Ability to bend, squat, and lift up to 35lbs
frequently. Work as part of an assembly line team or on individual production jobs from start to finish.
To apply: Apply online at: https://jobs.whirlpool.com/job/Greenville-Assembly-Production-Operator-
Greenville-Operations-OH-45331/699888400/
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (15)April 2021
Week of April 4—April 10
Refrigeration System Solutions Sales Engineer
Company: Emerson
Job Location: Sidney, Ohio
Qualifications Desired: Five years of refrigeration product development / marketing / sales / business devel-
opment experience or related experience. Demonstrated success in sales, application engineering or market-
ing in the food service or food retail markets. Effective analytical, coordination and verbal communication skills.
Adaptability to handle changing selling environments. Ability to travel up to 40-45% of the time. Legal authori-
zation to work in the United States - Sponsorship for this role will not be provided. PREFERRED EDUCATION,
EXPERIENCE & SKILLS: Seven (7) or more years of refrigeration product development / marketing / sales /
business development experience or related experience. Demonstrated ability to lead and influence col-
leagues at all levels of the organization. Proven track record of translating market trends & customer needs
into an actionable strategies. Strategic planning and marketing preferred. Strength in understanding Emerson
Cold Chain solutions.
Education Requirement: BS degree in Business, Management, Engineering, or related technical discipline
Job Duties: If you are a Sales Engineer looking for an opportunity to grow, Emerson has an exciting oppor-
tunity for you! You will lead the efforts with customers and internal teams to identify market trends and pain
points to be solved utilizing applicable Emerson related products. You will prioritize against real market de-
mands based on collaboration with Cold Chain sales, product management, marketing, engineering, and oper-
ations. You will analyze strategic positions of Emerson peers and competitors, identify strategic partners and
synergies, prepare strategy presentation and support executives. AS A REFRIGERATION SYSTEM SOLU-
TIONS SALES ENGINEER, YOU WILL: Act in a Pre-sales role within the selling process helping our customer
navigate trends and changes impacting refrigeration systems. Provide consultative advice on refrigeration sys-
tem architectures. Working directly with the sales team and customer. Translates technical performance back
into customer value and savings. Works with sales and other departments to develop strategies to grow cold
chain sales by managing pricing, margins, and profitability. Allocate specific time to personally survey custom-
ers, as well as structure strategies, tools and processes that listen and act on the “voice of the customer”.
Work with sales and new product development teams to ensure the customer needs are being translated into
action plans for future growth of the Cold Chain. Conducts market, product, competitor, and customer research
to determine unmet customer needs. Actively collaborates with Engineering, Operations, and Sales teams
throughout the selling process to ensure the identified opportunities our delivered as proposed. Develop the
business case and financial justification to prioritize opportunities for potential customer solutions.
To apply: Apply online at: www.emerson.com/careers; Reference Code: 21003196
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (16)April 2021
Week of April 4—April 10
Mechanical Technician (2nd Shift)
Company: Emerson
Job Location: Sidney, Ohio
Qualifications Desired: Must have basic mechanical, HVAC, and electrical/electronic Skills.
Must have troubleshooting and problem solving skills. Must have personal computer skills and
experience with Microsoft Office programs. Legal work authorization in the United States - Spon-
sorship will not be provided for this position. PREFERRED EDUCATION, EXPERIENCE &
SKILLS: Associates Degree plus 3 years of experience or equivalent combination of education
and experience
Education Requirement: Associates Degree plus 1 year of experience or equivalent combina-
tion of education and experience.
Job Duties: If you are a Mechanical Technician professional looking for an opportunity to grow,
Emerson has an exciting opportunity for you! Based in our Sidney, OH location, you will work in
conjunction with product and research engineers to design, develop, and qualify compressors for
residential and commercial air conditioning systems. To maintain our role as a global leader of
compression solutions we continually seek talented and ambitious technicians to work in our en-
gineering laboratories. We are seeking a 2nd shift laboratory technician to contribute to our
growth and continued innovation. AS A MECHANICAL TECHNICAN, YOU WILL: Follow engi-
neering laboratory test instructions to performance test compressors. Set-up and install compres-
sors and supporting compressor electronics for test purposes. Operate laboratory test equipment
including calorimeters, mass flow stands, data acquisition. systems, and other measuring equip-
ment used to acquire compressor performance characteristics. Fabricate supporting test fixtures
and controls required for non-standard tests. Review test data for compliance with applicable test
data standards. Perform various tasks related to the upkeep of the lab.
To apply: Apply online at: www.emerson.com/careers; Reference Code: 21003058
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (17)April 2021
Week of April 4—April 10
Associate Mechanical Technician
Company: Emerson
Job Location: Sidney, Ohio
Qualifications Desired: Good communication skills. Basic mechanical skills. Basic computer skills. Basic
understanding of Lean practice. Legal authorization to work in the United States - Sponsorship for this role
will not be provided. PREFERRED EDUCATION, EXPERIENCE & SKILLS: Associates Degree in a Mechan-
ical competency or HVAC/R field or equivalent plus one (1) year of experience or equivalent combination of
education and experience. Good troubleshooting & problem solving skills. Good computer skills. Welding
skills. Understanding of Lean Principles and their use.
Education Requirement: High School Diploma plus 2-3 years of experience in HVAC/R or mechanical dis-
cipline or equivalent combination of education and experience
Job Duties: If you are a Engineering professional looking for an opportunity to grow, Emerson has an excit-
ing opportunity for you! Based in our Sidney, Ohio location, you will perform daily laboratory tasks to com-
plete engineering project assignments. Your focus will be on improving and developing solutions with com-
pressor technologies for HVAC customers throughout the world, beginning here at Emerson in Sidney Ohio.
You will effectively communicate with peers and internal engineering customers in order to take proper ac-
tions for success. You will assemble, analyze, and troubleshoot various products. You will also be involved in
Safety+5S, & other improvement practices. AS AN MECHANICAL TECHNICIAN, YOU WILL: Adhere to all
corporate and laboratory safety standards and polices, including all EPA regulations. Assemble prototype or
development type compressors with hand tools, power tools, fixtures, and utilizing other equipment. Maintain
and upkeep assembly equipment and work spaces. Operate laboratory test equipment including but not lim-
ited to presses, welders, test stands, material handling equipment, and electrical or mechanical measuring
devices. Communicate technical information related to project statuses to engineers. Accurately document
assembly or test results. Fabricate supporting assembly or test fixtures. Meet the physical demands of the
role which include manipulation of average to heavy weights (weight range up to 50 lbs.), standing for ex-
tended periods of time, use of hand tools, welding, cutting and brazing equipment. Work with verbatim com-
pliance with refrigerant handling procedures if assigned. Demonstrate conscientious and ambitious behavior.
Follow laboratory assembly or test instructions. Work in a team environment and individually. Comply with
ISO Standards.
To apply: Apply online at: www.emerson.com/careers; Reference Code: 21000313
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (18)April 2021
Week of April 4—April 10
Electronics Technician
Company: Emerson
Job Location: Sidney, Ohio
Qualifications Desired: Demonstrated ability in electronic product failure analysis, problem solving and in-
strumentation/data logging. Experience with reliability analysis and testing with EMI/EMC equipment, thermal
chambers. Oscilloscopes, Data-loggers and power sources. Excellent verbal and written communication skills
and PC skills. Legal authorization to work in the United States. PREFERRED EDUCATION, EXPERIENCE &
SKILLS: Associates Degree in Electrical/Electronics Engineering plus 5 years of electronics experience or
equivalent combination of education and experience. Knowledge of electronics manufacturing process/in-
circuit testing is a plus. Knowledge of product standards and regulatory agency requirements (UL/CE).
.Knowledge of HVAC Technology.
Education Requirement: Associates Degree in Electrical/Electronics Engineering plus 3 years of electronics
experience or equivalent combination of education and experience.
Job Duties: If you are an Electronics Technician professional looking for an opportunity to grow, Emerson
has an exciting opportunity for you! Based in our Sidney, OH location, you will be working on electronics for
AC/Ref systems and cold chain solutions, building test fixtures for specialized automation testing, electronic
and component product qualification and reliability testing. AS AN ELECTRONICS TECHNICIAN, YOU WILL:
Work with product testing/approvals for internal electronic qualification and external regulatory agencies (UL/
CE). Handle the execution of software/hardware testing with custom built test fixtures/controls. Be responsi-
ble for analyzing electronic products for failure modes by performing root cause analysis with the ability to
troubleshoot to the component level. Coordinate and support development of automated test equipment. Ad-
here to all corporate and laboratory safety standards and policies, including all EPA regulations. Provide flexi-
bility to work in multiple disciplines of a laboratory. Perform physical demands of the position which include
manipulation of average to heavy weights (weight range up to 50 lbs.), standing for extended periods of time,
use of hand tools, and high voltage electronic test equipment. Possess good inter-personal skills, strong writ-
ten and verbal communication skills to work with team leads and project engineers.
To apply: Apply online at: www.emerson.com/careers; Reference Code: 20010626
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (19)April 2021
Week of April 4—April 10
Part-Time Fountain/Kitchen
Company: BK Rootbeer
Job Location: Sidney, Ohio
Address: 301 Riverside Drive, Sidney, Ohio 45365
Qualifications Desired: Must be clean, dependable, and at least 16 years of age.
To apply: Apply in person at: 301 Riverside Drive, Sidney, Ohio. There are applications
in a pouch on the window closest to ball field.
Leader in Training
Company: The Buckle
Job Location: Piqua, Ohio
Qualifications Desired: The physical demands described here are representative of those that must be met
by a Teammate to successfully perform the essential functions of this job. Reasonable accommodations may
be made to enable individuals with disabilities to perform the essential functions. While performing the duties
of this Job, the Teammate is regularly required to stand; walk; use hands to finger, handle, or feel; reach with
hands and arms; climb or balance and jump; stoop, kneel, crouch, or crawl and talk or hear. The Teammate is
occasionally required to sit. Physical ability to lift and maneuver 50lbs throughout the store and backroom.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision,
depth perception and ability to adjust focus. Work Environment: While performing the duties of this job, the
Teammate regularly works in a retail store setting. The noise level in the work environment is usually moder-
ate.
Education Requirement: High school diploma or general education degree (GED); or one to three months
related retail experience and/or training; or equivalent combination of education and experience.
Job Duties: The Leader in Training (LIT) and Floor Leader position’s primary responsibility is to fulfill our mis-
sion statement: “To create the most enjoyable shopping experience possible for our Guests.” The LIT and
Floor Leader performs a variety of sales, merchandising and operational tasks assigned by store management
(e.g. cashiering, merchandise display and pulls, register procedures, and routine cleaning of facilities). Works
directly with the Store Manager and Leadership Team to develop sales, recruit new Teammates and provide
leadership. Essential Duties and Responsibilities: This description intends to describe the general nature and
level of work performed by Teammates assigned to this job. It is not intended to include all duties, responsibili-
ties and qualifications. To perform this job successfully, an individual must be able to perform each essential
duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to per-
form the essential functions.
To apply: Apply online at: www.indeed.com or 6 Buckle Jobs in Sidney, OH 45365 Hiring Now | Indeed.com
OhioMeansJobs Shelby County, 227 S. Ohio Avenue, Sidney Ohio 45365 937-498-4981 ext. 2816, www.shelbycountyjfs.org (20)You can also read
