Bring your floors to life - REMOVE REPLACE
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Bring your
floors to life
with Seoladh’s super-efficient underfloor heating
REMOVE REPLACE REDUCE
Sustainability matters | www.seoladh.ie
Seoladh’s super-efficient Our patented galvanised iron layered sheets have
a much higher thermal conductivity compared to
underfloor heating cement or pre-grooved floating floor systems. This
allows for a much more efficient radiant heat transfer
Designed for both Wet (Heat Pumps)
than all other systems currently on the market.
and Dry (Electric) systems
With Ireland committed to moving toward a low
carbon future, as outlined in the Government’s climate
“40% more heating efficiency
action bill, electrification will be replacing fossil fuels
than standard cement screed”
that were traditionally used to heat Irish homes.
Our unique patented design allows for a compact,
low-thickness floating floor solution, while achieving a Key Attributes
much higher radiant heat efficiency due to the high
thermal conductivity of both the material and the • 30 times higher thermal • Lifespan of more than 35
conductivity than cement years.
finned array design.
screed.
• Quick installation time –no
This system can deliver rapid, high-heat output at low • Up to five times more digging or cement drying
efficient heating times required, and the floating
temperatures, which reduces the need to continuously
system has a minimal
run your heating and therefore reduces overall energy • Perfect for low temperature increase in floor
consumption - making it the perfect answer for any heat pumps. height.
house, apartment or commercial premises.
• Helps to contribute to • Ideal with all floor types –
clean, renewable and hard floor, decorative
carbon neutral heating. tiles, carpet and all
laminate flooring.
Installation Process
1 2 3
Insulation 0.5mm GI flat Galvanised iron
board sheets finned array
4 5 6
Currently the most common underfloor heating
systems use a 50 - 70mm cement screed. This
method is extremely inefficient due to the time it takes
to radiate this heat through the cement.
0.5mm GI flat Finished floor Warm floors
sheets
Other floating floor systems are also available
which typically consist of pre-grooved EPS insulation
System thickness excluding 10mm - 19mm (Dry (electric) - Wet
boards. These systems are even less efficient than insulation System)
the standard concrete pour and result in a poor heat
Thermal conductivity of
44 W/mK
output. galvanised iron sheet (W/mK)
System Load Density (kg/m2) 11.5 kg/m2
Compressive strength 2000kgs/ m2Seoladh’s Wet System Seoladh’s Dry System
An ideal, cost-efficient solution for low Ideal for spaces without existing boiler
temperature Heat Pumps systems
In the Irish market most
apartments, work premises
and leisure facilities use
inefficient storage heaters
or convection radiators.
Seoladh’s electrical
heating cable combined
with our patented pipe placement system can
give these sometimes tight spaces extra room by
removing chunky radiators, while at the
same time:
Delivering a more Can be tied in with PV Reducing energy use
comfortable, healthier panels to deliver a zero
Heat Pumps are fast becoming the preferred radiant heat carbon heating system
choice for home heating systems.
Our heating cable is far superior to other market-
The key difference between heat pumps and leading heating cables due to the seven-layer
traditional gas/oil boilers is that they deliver a low- process. The stainless steel mesh layer prevents any
temperature heat, usually around 35-45 degrees electromagnetic waves, electrical shorts/ shocks and
celsius, compared to boilers at 75-85 degrees celsius. increases fire safety. Output ranges from 500 - 2500
watts based on room size.
Our system is designed specifically to deliver this
low-temperature heat efficiently unlike the current
underfloor methods or using oversized radiators.
With people now upgrading their homes to make
them more energy-efficient, now is the time to
1. Metal heat cable 1mm 5. Fourth layer 0.5mm
integrate your home with a Seoladh underfloor
silicone
heating system. 2. First insulation layer teflon
0.3mm 6. Stainless steel mesh layer.
(no waves)
3. Second layer glass fibre
Benefits include: 4. Third layer glass fibre
7. Anti corrosive heat paint
coating
• Dramatically reduces • Simple design enables
heat pump (condenser fast installation time and
Operating Voltage AC220V
and evaporator) less inconvenience.
operation time. Thickness 8 mm
• Pert pipe maintains
• Can be installed on both a longer lifespan than Output Rating per m2 1m2 125/150 watts
ground floor and first floor. standard heating pipes:
Minimum Installation 3.3 m2 =500 Watt
35 to 50 years.Engineer and Technical Why Choose
Director, Seoladh?
Conor Crehan We understood from
There are 2 key principles when it comes to the market feedback
perfect home heating solution. that the word
‘disappointment’ kept
1. Radiation Vs Convection cropping up when
‘underfloor heating’
Underfloor heating is the ideal form of space heating was mentioned. As
as it uses radiant heat, which is much more efficient a team, we believed
and comfortable than heating a room by convection that we could bring
using radiators. a product to the market that would change this
In order to radiate this heat as efficiently as possible thinking; where customers’ expectations were satisfied
we need to use a material with high thermal and were always core to our value statement as a
conductivity. In reality, cement, pre-grooved EPS company.
boards and electric mats don’t have this quality. Our We undertook extensive market research and found
system uses galvanised iron that naturally has an what we were looking for in one of the World’s most
extremely high thermal conductivity, which allows the innovative countries – South Korea. In South Korea
thermal energy to be transferred/conducted much underfloor heating is far more than just a hot topic,
more efficiently and therefore achieving a warm floor but a way of life. Destiny stepped in when Seoladh’s
in a much quicker time. own Junsoon Lim learned of a South Korean engineer
who was just realising his lifelong obsession to build
a flawless underfloor heating product. This is the
product delivered in the brochure you see today.
We value sustainability in construction and with our
product, we have significantly reduced our impact
on the environment. Our name “Seoladh” is an Irish
2. Finned Vs Tubular Design word meaning “conduction”, “pathway”, or “home
Our finned array design greatly increases the contact destination”, among others. The brand personifies an
surface area of the pipes to the floor, therefore innovative process to provide market-leading product
increasing the heat exchange efficiency. performance, which is easier on your budget, your
time, and your decision making.
Essentially we use the same principles behind the
design of a radiator and have adapted it to an If you value and believe what we do, you’re home with
underfloor heating system. Seoladh!
Quite simply, Seoladh underfloor combines these two
Chief Vision Officer
key principles to deliver the most efficient heating
system, brand new to the Irish market. Gavin Gannon
Contact Like us on Facebook
Seoladh Underfloor Phone: +353 1 525 2505
Heating Email: info@seoladh.ie
1A Maxwell Road, Website: www.seoladh.ie
Rathmines,
Dublin 6, D06 FW58You can also read
