BULLDOG ABRASIVES INDUSTRIAL 2014
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
BULLDOG ABRASIVES
INDUSTRIAL 2014
Bulldog Abrasives Southern Africa (Pty) Ltd, Joshua Doore Building, 4 Andries Street South, Wynberg, Johannesburg
Telephone: 0861 114 272 / (011) 786-5991 • Fax: (011) 786-5996/7/8
E-mail: info@bulldogabrasives.co.za / sales@bulldogabrasives.co.za • Website: www.bulldogabrasives.co.za
ABOUT BULLDOG ABRASIVES Bulldog Abrasives and Southern Africa (Pty) Ltd was established in 1995 to act as the sole distributor for Mirka Abrasives in Sub- Saharan Africa. For more than three decades Mirka has been a leading manufacturer and supplier of abrasives to the automotive manufacturers, automotive refinishing, and composite including marine, the wood and furniture industries as well as the metal finishing industries. In 1997 Bulldog Abrasives was acquired by the present management and has since broadened its product range to offer a total solution to end-users i.e. competitively priced quality products with added service and support of the highest calibre. These solutions were provided to the Automotive Industry and later the Woodworking, Industrial, DIY, Metal and Composite Markets. Our products have always been of the highest quality and competitively priced as a result of having aligned ourselves with the best-of-the-best with regards to our international suppliers. Our main emphasis over the years has always been on adding value to our end-users. For a complete catalogue and detailed information on each of our suppliers, and Bulldog Abrasives (Pty) Ltd, please visit our website or contact our sales team on (011) 786-5991
HIGH END POWER TOOLS
STAYER is the world leader in the development and manufacturing of power and battery operated tools,
welding specialist inverters and related products. STAYER tools are made in Spain at the factory close to
Madrid. STAYER currently supplies over 60 countries and has been in existence since the early 1970’s.
STAYER hosts a full range of products for all applications and the comprehensive warranties ensure that
the machines are well backed by their local distributor BULLDOG ABRASIVES.
Stayer SAB 24 23 AL: Heavy duty
Stayer SU 650 EDK: Hot air gun Stayer S 110 PE: Jig saw
angle grinder
This machine has a 3-position auxilary handle and high This 2-speed electronic hot air gun dries and peels varnish, The Stayer S110PE jigsaw
power for long demanding work loads. It has a powerful S1 folds plastic materials and separates adhesive papers. It has a laser cutting guide
motor and a spindle lock button. has a variable temperature light and air blower on
and air-flow. The gun the working area. It has
Power input Watt 2,400 is presented in a plastic an electronic speed
No load speed min-¹ 6,500 carry case complete with control and a 3-position
accessories. It has a digital pendulum action guide
Disc diameter mm 230
L.E.D. display. support in low position for
Spindle thread M M14 a precise cut. Universal
Power input Watt 2,000 blade coupling.
Weight kg 4.8
Hot air flow l/min 250-500
Power input Watt 2,000
Temperature C 50-650
No load spreed mm-¹ 0-3,000
Weight kg 0.9
Weight kg 2.9
Stayer PBL 142 K: Screwdriver / Stayer SAB 800 R: Heavy duty Stayer LU 260 E: Polisher /
Cordless drill 14V angle grinder sander
This electronic 2-mechanical speed reversible, cordless drill The motor is engineered to allow a reduced body for a more This 6-speed electronic control machine is perfect for
is presented in a plastic carry case with a battery charger comfortable one hand grip and an uninterrupted operation. metal sanding and polishing. It is lightweight, powerful
and 2 Lithium batteries. It has an L.E.D. guide light and a It has a spindle lock button. and suitable for heavy duty use.
keyless chuck.
Power input Watt 800 Power input Watt 780
No load speed min-¹ 11,000 No load speed min-¹ 750-3,300
Battery voltage V 14.4 Disc diameter mm Ø115 Backing pad mm 180
Battery capacity Ah 2.6 Spindle thread M M14 Spindle thread M M14
No load speed min-¹ 0-340/0-1,300 Weight kg 1.7 Weight kg 3
Weight kg 1.8
Stayer LOM 185: Square based Stayer SD 27 BE: Heavy duty die
orbital sander grinder
The square based orbital sander is lightweight and has a This die grinder is suitable for hard, soft and plastic
dust extraction facility with a dust collection bag. It has a materials due to the electronic speed control. It has a
soft-grip and an ergonomic handle. precision collet to enable a perfect fit. It has constant
speed electronics.
Power input Watt 200
Power input Watt 650
No load speed min-¹ 11,000
No load speed min-¹ 7,000 - 28,000
Plate size mm 90x183
Wheel diameter max mm Ø25
Orbit mm 2.5
Collet size mm Ø6
Weight kg 4.8
Weight kg 1.7
www.grupostayer.com
QUALITY FROM START TO FINISH
Decades of experience and a strong commitment to product development has seen MIRKA become a
pioneering specialist in flexible abrasives and products that allow for true dust-free surface finishing.
These innovations are further backed by the creation of ground-breaking new coatings. Thanks to
its commitment to innovative design and development, the new MIRKA Power Tool unit has created
advanced sanding and polishing machines which also provide outstanding benefits to users. Combined
with a range of effective, high quality accessories, giving MIRKA customer’s unmatched access to a
complete sanding solution to meet their individual needs.
++++
Mirka Gold discs 150mm Mirka Mirlon® hand pads and rolls Mirka Carat sheets 230 x 280mm
Gold is a durable product, well suited for sanding Thanks to its special structure, Mirlon® is a flexible, Carat sheets are available in 230MMX280MM sheets for
at high speeds. In order to achieve an optimal three-dimensional fibre sanding material that’s dry sanding applications. Aluminium oxide grain is bonded
sanding result, the semi-open grit binding and easy to use on profiled surfaces and produces an onto a high quality paper backing. Fine grits (P150 - P400)
special stearate coatings are designed to prevent excellent finish. It is ideal for matting of surfaces use lighter “B” or “C” weight quality paper and benefit from
clogging. These discs are available in 9 holes (dustfree), and creates an excellent base for the next lacquer special stearate size coating. Ideal for use on primed and
6 + 1 holes (dust-free) and plain in grits P80 to P500. layer. Mirlon’s grit range is General Purpose P320, painted surfaces, fine detailing and de-nibbing between
Very Fine P360, Ultra Fine P1500 and Micro Fine coats. The open coating of the grain
P2000. Mirlon is availble as follows: minimises clogging. Stearate coated
Carat reduces clogging further and
Hand pads helps dust fall free from the
• 140mm x 230mm surface to ensure a high
Rolls quality finish. Available in
• 140mm x 10m grits P40 - P400.
• 140mm x 50m
• 1410mm x 50m
Mirka® DEROS 650CV sander Mirka Basecut® discs 150mm Mirka Avomax belts
Mirka® DEROS 650CV (Direct Electric Random Orbital Basecut® is the economical, high efficiency choice Specially developed for the wood working industry, the
Sander) is the first ever electric sanding machine with a for sanding paper. There are a host of productivity optimized open coating and smooth surface structure
brushless motor and no external power supply. It is also and efficiency features, including a high initial of the size bond, ensures Avomax is long-lasting and
the lightest electric machine on the market (1.0KG). It has aggressive cut and a long working lifespan which efficient. Designed for improved calibration, stronger
a soft start function, a built in electronic motor brake and ensures that it is a cost effective choice. bonding and longer life, it runs smoothly and is resistant
a smooth, easy to operate lever to control motor speed. The first-class performance characteristics of Basecut® to humidity. The full resin bonding and
Thanks to its high efficiency brushless motor, the Mirka® are ideally suited to a wide variety of applications, aluminium oxide grain, combined with
DEROS 650CV also has including the sanding of wood and composites. accuracy and reliability, guarantees
plenty of power to get Basecut® discs are available excellent product performance in
the job done quickly in 6 + 1 holes (dust-free) industrial applications. Available in a
(350W). It is equipped and plain in grits range of sizes - grit sizes from P40 up
with a new type of 150MM/6” P40 to grit P400. to P240.
backing pad, which has a central air
inlet. This results in improved air flow
and helps extract dust away from the
centre of the tool even faster.
Mirka Abranet® discs 150mm Mirka Abranet® HD discs 150mm Mirka® Diamond wheels
Abranet® combines high performance and a longer Specifically developed to achieve outstanding results New Mirka® Diamond Wheels comply with EN 13236.
lifespan than traditional abrasives, making it a cost on the most challenging surface conditioning and Every disc has been tested seperately. There are three
effective solution in a vast range of applications. It is repair applications, Abranet® HD is the choice where different types of Mirka® Diamond Wheels. The Mirka
user-friendly whether being used by machine or by hand conventional abrasives fail. The nylon mesh backing Diamond TR is a universal disc used for fast and precise
and its true dust-free sanding characteristics result in a material creates a more even abrasive surface which cutting. It is used for building materials and concrete
cleaner work environment, as well as a better surface finish. produces a more consistent surface finish more quickly. products. The Mirka® Diamond SE is for more demanding
Abranet® is used for the sanding of both soft and hard Designed for optimum performance in wet and dry modes, applications, such as for cutting stone. The Mirka®
wood, intermediate sanding of paint and lacquer, sanding it features exceptional resistance to edge wear and clogging Diamond TWF is used for cutting tiles and porcelain.
of putty and filler. Abranet® is which means it retains its high efficiency sanding properties
available in grits P80 to for far longer, especially in
P600. demanding situations.
Available in grits P60,
P80 and P150.
www.mirka.com
PNEUMATIC TOOLS:
QUALITY / TECHNOLOGY /SERVICE
The RODCRAFT brand stands for high-quality products and services. Founded in Germany, RODCRAFT
has grown steadily to become one of the world’s leading brands of pneumatic tools and workshop
equipment dedicated to the vehicle service and industrial maintenance applications. When buying a
RODCRAFT product, you can be sure you are choosing quality and performance and getting one of the
best European designs available on the market today.
Rodcraft RC7166: M14 Angle Rodcraft RC7180: Angle grinder Rodcraft RC7011: 6mm Die grinder
grinder for 115mm discs with flange set for 180mm discs - rear exhaust
Compact angle grinder with safety speed governor, Robust industry quality angle grinder with safety speed Small die grinder (0.4KG) with insulated handle and 6mm
protective guard and flanges. The side handle, which is governor, protective steel guard (can be turned without collet. With integrated rear exhaust and adapter ring to
for additional control, can be taken off for more confined locking in position) and flanges. Easy to control with attach a silencing exhaust system. It has a power output
areas. May be used for many applications such as sanding detatchable side handles. The applications for this of 300 Watt and
with flap discs, grinding grinder is cutting, grinding runs at a speed
and cutting. Has a and with flap discs with of 26,000RPM.
power outage of 750 22MM thread. It has
Watt and runs at a a power output of
speed of 10,000 RPM. 700 Watt and runs at a
speed of 7,600 RPM. For
use with 180mm discs.
Rodcraft RC4550: Reversible Rodcraft RC4500: Reversible Rodcraft RC7015RE: Mini pistol
13mm (1/2”) drill 10mm (3/8”) drill grinder 6mm
Reversible 13mm (1/2”) drill with double 3-planet-gear and Compact tool with forward/reverse switch on the handle Value for money pistol tool with an excellent power ratio
double front bearing for tough applications. With precise and equipped with RÖHM® - quick chuck up to 10MM (no angle gear). Comfortable to use with a silencing
RÖHM® - quick keyless chuck and detachable side handle. (3/8”). It has a power exhaust hose system for extra reduced noise and a no-
It has a power output of 500 Watt and runs at a speed of output of 500 Watt and disturbace exhausted air.
800RPM. It has a 1/4” air runs at a speed of 2,000 Easy to control with two
inlet. min-1. It has a 1/4” air hands. It has a power
inlet. output of 300 Watt
and runs at a speed of
17,000 RPM.
Rodcraft RC2263XI: Impact Rodcraft RC2277: “The Beast” Rodcraft RC5615: Needle scaler
wrench 1/2” Impact wrench 1/2” 12mm x 3mm
1/2” High power impact wrench with lightweight 1/2” Composite impact wrench with fast, high torque and Small, straight needle scaler for wheel rims, frames and for
composite motor housing. Robust F/R shift with 3 position forged DUOPACT mechanism. This working in a limited space. It consists of 12 x 3MM needles
regulator in forward. machine proves that dynamite and has an inner hose diameter of 8mm. It has a 1/4” air
Full power in reverse comes in small packages inlet.
- 1050 Nm max. A with a light weight of only
silencing exhaust hose 2.0KG’s! Robust forward-
can be attached. reverse shift/power regulator
on one knob only. Air exhaust
down the motor housing.
Rodcraft RC7802RV1: Orbital Rodcraft RC7702V6: Random
Rodcraft DMS221: Torque wrench
block sander orbital palm sander 2.5mm
Palm block sander - composite lightweight. 93MM x Palm random orbital sander - composite lightweight but It has an easy to read double scale in the rubber coated
174MM 8-hole velcro pad. Equipped for external dust very powerful finishing sander. It comes with a 150MM handle (Nm and ft.lbs.) and a precise torque setting
extraction (29MM swivelling (6” ) velcro pad with 15 holes which takes both 6 hole, between 40 – 200 Nm (30 – 150 ft.lbs.). It is easily
suction port). Innovative 6+1 hole and 8+1 hole abrasives. Equipped for external adjustable without locking into positions. Once it is set the
and ergonomic exhaust dust extraction (29MM and torque adjustments can be locked. It has a high durability
system always blows away 27MM swivelling suction thanks to a solid and robust ratchet mechanism. It has a
from the user ports - interchangeable). It practical forward / reverse knob on ratchet head.
Used for wood-working and has a fully insulated handle
smaller surfaces. It runs at to protect against vibration
a speed of 10,000RPM. and cold.
www.rodcraft.com
TODAYS SOLUTIONS MADE FROM
ADVANCED MATERIALS
GARRYSON® is committed to being the leading manufacturer and supplier of specialty abrasives, carbide
burrs, and routers in the world. GARRYSON® is part of one of the leading producers of Tungsten-based
products and is one of the few companies in the industry that is fully integrated from raw materials
through to high quality, value added, finished products.
Garryson® 6mm shaft mounted
Garryson® flexistrip discs Garryson® mounted points
flap wheels
Garryson® flap wheels are ideal for use on Garryson® non-woven flexistrip disc is a strongly Aluminium oxide mounted points are available in a large
a wide range of materials. They are ideal for highly flexible non loading product which conforms to range of shapes and sizes. They are ideal for grinding and
stock removal, deburring, cleaning and finishing. the shape of the work-piece. It is ideal for the removal finishing on stainless steel, cast iron and high alloy steel.
of rust, scale and coatings on many different materials.
• They may be used for the cleaning of weld surfaces Product offering:
• Removing machine
marks and flaws • Open woven construction - no clogging
• Used for finishing • Easy use when compared
stainless steel vessels to alternative products
• Removing die lines • Offers minimal stock removal
• Removing flash form • Non-metallic - will
rubber and plastic surfaces not rust or cause metal
• Paint and rust removal contamination on a work
• Sanding wood piece
Garryson® tungsten carbide burrs
Garryson® coated carbide burrs are proven to dramatically improve the performance of
the burr.
Coatings offer:
• Increased anti-friction properties leading to improved chip removal
• Reduced wear of teeth
• Reduced heat build up
• Reduced forces due to better lubrication
All of these advantages result in the extended service life of the tool.
Coating type:
Rapide-A
• Ideal for use on non-ferrous metals such as aluminium and soft materials
• Low friction properties reduce clogging of burr teeth
• Reduced clogging leads to greater material removed
• Available on Garryson Aluminium Burrs
Rapide-B
• Ideal for use on ferrous metals
• Coated hardness >3,300HV gives excellent wear resistance
• Reduced wear results in longer life of the burr and greater material removed
Garryson® 150mm/180mm flap
Garryson® quick change mini discs Garryson® CERAMIQ® flap discs
discs zirconia
Premium Quick Change Mini Discs are ideal for Introducing the new Garryson® CERAMIQ® flap discs. Garryson® zirconia flap discs are universal discs used on
material removal and blending where accessibility Best-in-class ceramic abrasive for use on steels, stainless a wide range of ferrous materials. They are ideal for use in
is a problem or where the work area needs to steel, carbon steel, high nickel alloys and titanium. applications such as weld preperation, weld seam removal,
be kept to a minimum. The minidisc offers: CERAMIQ® abrasives are ideal for aggressive metal surface blending and edge grinding. Zirconia flap discs
finishing on difficult to grind and finish materials. offer consistant grinding and finishing performance. They
• Improved access to small awkward areas have a long life compared
• Minimised area of repair/ to the life of resin fibre
work, reducing time spent on discs. They have reduced
further finishing operations vibration and noise
• Exceptional life compared compared to depressed
to traditional coated abrasive centre grinding discs.
discs of the same diameter
• Quickchange locking system for
convenient, fast changeover of discs
www.garryson.com
INNOVATION IN GRINDING AND
CUTTING TOOLS
RHODIUS are one of the leading manufacturers of grinding tools in the world, supplying over 100
countries with high quality Cutting and Grinding products for every application, introducing innovations
into the market every year making the user’s work not just easier and more efficient but also safer.
Products produced in Germany at the highest European standards.
Rhodius XT10 Topline stainless steel cutting disc: 115 x 1 x 22.23mm
Extra-thin (XT) cutting discs cut much easier thanks to the lower friction at the workpiece. This minimises
the thermal load and greatly reduces blueing of the workpiece. It is a almost burr-free cut, minimising time-
consuming reworks.
Material: Application examples: Product advantages:
• Rust and acid-proofed steels • Thin-walled tubes • Low development of burrs
• Hardox • Thin-walled profiles • Few sparks
• Hardened steels • Steel sheets • High cutting speed
• High-alloyed steels • Solid material • Long lifetime
• High tensile steels • Flat iron • Cool cut
• Galvanized parts • Low odour
Rhodius XT20 Topline steel cutting disc: 115 x 1 x 22.23mm
Rhodius steel cutting discs are designed for cutting carbon steel and provide very good results
economically.
Material: Application examples: Product advantages:
• High tensile steel • Thin-walled tubes • Low development of burrs
• Hardox • Thin-walled profiles • Few sparks
• Structural steels • Steel sheets • High cutting speed
• Tool steels • Solid material • Long lifetime
• Galvanized parts • Flat iron • Cool cut
• Low odour
Rhodius XT20 Topline steel cutting disc: 230 x 3 x 22.23mm
Rhodius steel cutting discs are designed for cutting carbon steel and provide very good results
economically.
Material: Application examples: Product advantages:
• High tensile steel • Thin-walled tubes • Low development of burrs
• Hardox • Thin-walled profiles • Few sparks
• Structural steels • Steel sheets • High cutting speed
• Tool steels • Solid material • Long lifetime
• Galvanized parts • Flat iron • Cool cut
• Low odour
www.rhodius-abrasives.com
A WHOLE NEW STANDARD IN
CUTTING PERFORMANCE
KARBOSAN is a leading manufacturer for a wide range of resin and vitrified grinding wheels, cut-
off discs, grinding discs, flap discs, mounted flap wheels, fibre discs, endless belts, rolls, waterproof
abrasives and coated abrasives. KARBOSAN services more than 50 countries on 5 continents, and is
among the fastest growing abrasives producers in the industry.
Karbosan thin line stainless steel cutting disc:
115mm / 230mm Karbosan metal cutting disc: 115mm / 230mm
Karbosan’s Inox Thin Line Cutting Disc combines comfort and high cutting speed Karbosan’s Metal Cutting Disc has a long life and is fast cutting. It is a high
performance for all types of stainless steel. performance disc used for iron and steel
Thanks to it’s thin and strong structure, cutting. These discs are used for profile,
it gives confidence to the user. As it is pipe or general solid steel as well as
non-ferrous, it doesn’t cause any rust on general construction steels. These discs
stainless steel surfaces, This disc can be have a long life resulting in them being
used on pipe, profile, sheet plate and all very economical.
general types of solid iron and steel. The
advantage of the Inox Thin Line Cutting
Disc is that this disc is very economical
and extremely fast cutting.
Karbosan metal cutting disc for machines higher
than 3kw Karbosan metal cutting disc: 115mm / 230mm
This Metal Cutting Disc has a long life and is fast cutting on general iron and steel. Karbosan’s Metal Grinding Discs provide a high burr removal capability on general
It gives you a high performance on types of iron and steel to give maximum
stationary machines higher than 3KW. performance and a long life. These discs
These discs are used on profile, pipe or are used for metal grinding of profile plates,
general solid iron This disc gives you an rebar and various steel structures, such
increased life span making for a far more as iron and steel. It is generally used for
economical and efficient process. surface grinding, rust removal, welding
burrs and in processes such as grinding
off edges and burring after iron foundrry
operations. The increased life span makes
for greater cost savings on labour and
consumables.
Karbosan aluminium oxide resin fibre disc: Karbosan zirconia resin fibre disc:
115mm / 180mm 115mm / 180mm
Karbosan’s Aluminium Oxide Resin Fibre Discs are very aggresive. They have a high Karbosan’s Zirconia / Alumina Resin Fibre Discs have a fast cutting performance
cut performance resulting in increased productivity. They are recommended for the and are long wearing. They have a cool cut resulting in them having a long life, which
grinding and finishing of welding parts and chips of various metals. They are backed makes them very economical. They have increased productivity. Their recommended
with a 0.8mm vulcanized fibre and coated application are for the grinding and finishing
with an aluminium oxide grain. They are of heavy metals, stainless steel parts and
available in grits P24 to grit P120 and in sizes edges. These discs are backed with a 0.8mm
115MMX22MM and 180MMX22MM. vulcanized fibre and coated with a zirconia /
alumina grain. They are availble in grits P24
to grit P120 and in sizes 115MMX22MM and
180MMX22MM.
www.karbosan.com.tr
YOUR LEADING SUPPLIER OF
ABRASIVES AND AUXILIARIES
Bulldog Abrasives (Pty) Ltd have not only made significant investments in production and conversion
machinery and equipment to ensure you the very best quality products on time every time, but, we
have spent the past 15 years sourcing our comprehensive range of Home Grown products to suite our
customer’s needs including a full range of abrasives , emery rolls, sheets , cutting and grinding discs,
resin fibre discs, Machinery, flap discs and more. Many of the Home Grown products are converted from
Top grade European quality products and components to ensure only the best quality at the right price.
The Homegrown range of products are economically priced and a solid performer for every application.
Bulldog abrasive sanding belt - Bulldog H-827 non-hvlp spray gun Bulldog AT991L self generating
assorted grits and sizes 14mm nozzle sander
WK X weight cloth material is suitable for all narrow This HVLP (high volume , low pressure) reasonably priced This quality product from Asia is lightweight and powerful
belts any length. The high quality Aluminium oxide spray gun has all the features and durability you need to with an economic air consumption relative to the power
grain coupled with the stiff X weight backing makes ensure the right finish every time , all the time. It comes output.it is ideal for wood finishing , deburring of steel,
this product ideally suited for the grinding and finishing with an aluminium alloy forged housing which has been stone , marble , fillers, primers and more. It is ergonomically
of Steel , Wood and composite substrates. The grits anodised. With the H-827 you get more consistency and designed and operator friendly, as well as cost effective for
range from 24-180 and include 240 as well as 320 grit. less overspray. This spray gun has a light every application.
It is also well suited to tailor make discs weight ergonomic design to eliminate
for vertical and other machine operator fatigue and comes with a 100%
sanders. stainless steel nozzle and needle cap set.
Cap sets can be changed depending on
the fan and quantity of the paint required. It
also comes complete with one plastic
gravity feed reservoir.
Bulldog professional cutting disc: Bulldog emery rolls - assorted Bulldog aluminium oxide resin
115mm / 230MM grits and sizes fibre disc
Bulldog Abrasives Home-grown range of bonded products Our Homegrown range of emery rolls comes in two These flat aluminium oxide discs are used for heavy grinding
are sourced specifically as a competitively priced great qualities and two widths , packaged in an easy to use and weld removal, in a similar fashion to flap discs. They
value product for all applications. These discs can be used dispenser which keeps the product neat at all times. Our consist of a stiff fibre board , impregnated backing with
on all forms of steel but is emery rolls are of the highest quality flexible J weight aluminium oxide coating. The Home grown range of resin
not suitable for INOX, cloth coated with Aluminium oxide. It comes in grits 40- fibre discs is a great all-purpose disc at a very competitive
(stainless steel), 600 and can be used price. The product is made in Europe under the strictest of
applications. for profile sanding controls. This aluminium
on wood and steel oxide resin fibre disc should
as well as a general never be used on stainless
purpose component steel as contamination may
and rust remover. occur.
Bulldog Abrasives zirconia flap disc: 115mm / 180mm - Gold / Silver / White
Bulldog Abrasives Homegrown flap discs are manufactured in house using the very best European quality materials, backings and glue on our state of the art machinery. This disc can be
used on both Mild and Stainless Steel, and is a zirconia product with a quality backing , excellent for stock removal, blending and finishing of all applications. This product helps lower your
process time and reduce your overall grinding costs.
www.bulldogabrasives.co.zaAUTHORISED BULLDOG ABRASIVES DISTRIBUTOR:
Bulldog Abrasives Southern Africa (Pty) Ltd, Joshua Doore Building,
4 Andries Street South, Wynberg, Johannesburg
Telephone: 0861 114 272 / (011) 786-5991 • Fax: (011) 786-5996/7/8
E-mail: info@bulldogabrasives.co.za / sales@bulldogabrasives.co.za
Website: www.bulldogabrasives.co.zaYou can also read
