2nd International Conference on Materials Science and Engineering - icmse
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
2nd International Conference on Materials Science and Engineering
11-13 March 2019, Cairo, Egypt
Under the auspices of
H. E. Prof. Dr. Khaled Abdel- Ghaffar
Minister of Higher Education and Scientific Research
Organized by
Central Metallurgical Research and Development Institute (CMRDI)
CONFERENCE PROGRAM
Day 1: Monday 11/3/2019
Hall 1 Hall 2 Hall 3
09:00 – 11:00 Session 1
09:00 –09:40 Opening
09:40 – 10:10 Plenary Lecture 1 “Semiconductors for solar cells and light emitting diodes”, Salah Bedair, USA.
10:10 – 11:40 Plenary Lecture 2 “Fabrication and potential applications of magnetic nanomaterials”, Yanglong Hou, China.
10:40– 11:00 Federation of Arab Scientific Research Council, Mubarak Mohamed Ali Magzoub
11:00 – 11:30 Coffee Break
11:30 – 14:00 Session 2: Electronic, 11:30 – 14:00 Session 3: Energy Production 11:30 – 14:00 Session 4: Metals and Alloys (I)
Magnetic and Optical Materials (I) and Storage (I) 11:30 -12:00 Keynote Lecture 3”Influence of force
11:30 -12:00 Keynote Lecture 1”New 11:30 -12:00 Keynote Lecture 2”Laser reduced convection during metallurgical processes”, K. Zaidat,
magnetic ceramics for domestic and cryogenic graphene oxide-based films: Production and France.
magnetic refrigeration”, E.K.Hill, France. applications”, A. Abdel Moniem, E-Just, 12:00 – 12:20”SEM and EDX analysis of inclusions in
12:00 – 12:20 “Capacitive humidity sensor Egypt. skimmed liquid aluminium”, P.Habibullah, Pakistan.
based on polymer composite thin film”, Fakhra 12:00 – 12:20 “Effect of ionic substitution on 12:20 – 12:40 “Optimization and characterization of
Aziz, Malaysia. structural, microstructural and electrochemical aluminium induced texture using RF power”,
12:20 – 12:40 “Graphene-anchored cuprous properties of high voltage cathode materials H.E.Elsorogy, Center of Excellence, Egypt.
oxide nanoparticles from waste electric cables for Li-ion batteries” ,M. Sanad, CMRDI, 12:40 – 13:00 “Influence of tinning material on
for electrochemical sensing”, S.A.Abdel Basir, Egypt. interfacial microstructures and mechanical properties of
CMRDI, Egypt. 12:20 – 12:40 “Achieving high efficiency Al-Sn/ carbon steel bimetallic castings for bearing
12:40 – 13:00 “Effect of La substitution on organic solar cells through electron transport applications”, M.Ramadan, Saudi Arabia.
CoFe2O4 electrical properties and positron layer modifications”, D.Gupta, India. 13:00 – 13:20 “Hydrostatic training and
annihilation studies”, B.I.Salem, Tanta 12:40 – 13:00 “Graphene-hybrid Bi2Se3 characterization of near stoichiometric Ni-Mn-Ga
University, Egypt. nanocomposites for supercapacitors alloy”, N.M.El-Dabah, Benha University, Egypt.
13:00 – 13:20 “Optical band gap tuning of applications”, D.Rayan, CMRDI, Egypt. 13:20 – 13:40 “Influence of Cr and hot deformation on
carbon quantum dots solution and its ink- 13:00 – 13: 20 “Graphene-supported and Mn- the continuous cooling transformation diagram of a
coated thin films”, M. Sami, E-Just, Egypt. promoted Co catalysis of Fischer-Tropsch newly developed low-carbon bainitic steel”, M.F.Ali,
13:20 – 13:40 “Optical properties and reaction for active and selective liquid-fuel Finland
microstructure of Ti and TiNi thin films before production”,I.K.Basha, E-Just, Egypt. 13:40-14:00 “Mechanical properties of thin wall ductile
and after annealing”, H.Abouarab, Cairo 13:20 – 13:40 “Carbide/nitride ceramics as iron: experimental correlation using ANOVA and
University, Egypt. solar receiver for solar energy applications”, DOE” N. Elbanna, Ministry of Military Production,
13:40-14:00 “Multifunctional magnetic ferrite D.Hessien, CMRDI, Egypt. Egypt.
encapsulated TiO2 nanotubular composite: 13:40-14:00 “Deposition and characterization
Fabrication, properties and drug delivery of CdS thin films using SILAR technique for
applications”, A.R.Abdel Rahman, CMRDI, quantum dot sensitized solar cell applications”,
Egypt. Z. Abdel Hamid, CMRDI, Egypt.
1
Day 1: Monday 11/3/2019 (continued)
Hall 1 Hall 2 Hall 3
14:00 – 15:00 Lunch
15:00 – 16:00 Poster Session 1
16:00 – 19:00 Session 5: Electronic, Magnetic and 16:00 – 18:10 Session 6: Energy 16:00 – 18:50 Session 7: Biomaterials and
Optical Materials (II) Production and Storage (II) Bioprocessing
16:00 – 16:20 “High conductive magnetic phase Ti4O7 16:00-16:30: Keynote 4” Ceramics and 16:00 -16:30 Keynote Lecture 5”Trigonella
supported 3D hierarchical nanoflowered liked structure metal oxides at the nanoscale for foenum graceum seed polysaxccharide n-
NiRu-LDH as highly efficient ORR electrocatalyst”, deployment in solar cells and medical HA/CS bioactive tternary nanocomposite:
K.B.Ibrahim, Taiwan. devices, Bonex Mwakikunga, South Africa Study of synergistic, architectural and
16:20 – 16:40 Bismuth based MOFs/nanocomposite for 16:30 – 16:50 “Supramolecular artificial mechanical aspects for bone tissue
versatile applications", M.Imran, Pakistan. photosynthetic complexes for light engineering”, M.Shakir, India.
16:40 – 17:00 “Improving transport properties of PANI/CdO harvesting systems: Photodynamic studies 16:30 – 16:50”New superplastic Ti-Nb-Ta-Zr
nanocomposite by using -radiation”, N.A.Yousif, NCRR, by laser photolysis”, M.Elkhouly, E-Just, alloys for biomedical applications”,
Egypt. Egypt. M.Gapreel, E-Just, Egypt.
17:00 – 17:20 “Microwave absorbing efficiency of an Al 16:50 – 17:10 “Radiation effect on 16:50 – 17:10 “Fabrication of functionally
matrix composite reinforced with nano-Ni/SiC particles”, morphology of cobaltite cathode material graded (Ti/Ca phosphate compounds) bio-
S.A. Abolkassem, CMRDI, Egypt. for solid oxide fuel cell” ,E.Borham, implants by investment-centrifugal casting”
National Institute for Radiation, Egypt. ,S.El-Hadad, CMRDI, Egypt.
17:20 – 17:40 “The particle size effect of Yb0.8R0.2MnO3 17:10 – 17:30 “Revitalization of double 17:10 – 17:30 “Gold nanoparticles – an optical
(R is Sm, Nd and Eu) on some physical properties”, perovskite Sr2FeMo1-xZnxO6 by Zn2+ ion biosensor for RNA quantification for cancer
I.A.Abdel-Latif, Nuclear Research Center, Egypt. concentration as anode materials for solid and neurologic disorders diagnosis”, A.Awad,
17:40-18:00“Determination of charge coefficient of oxide fuel cell application”, A.Omar, Zewil City, Egypt, Egypt.
piezoelectric film using a combined finite element model CMRDI, Egypt. 17:30 – 17:50 “Physical and biological
and dynamic loading technique”, O.P.Bernard, E-Just, 17:30 – 17:50 “Energy & climate change characterization of chitosan/ polyvinyl
Egypt. challenges: Advanced materials for CO2 alcohol/ciprofloxacin HCl nanofibers for
18:00:18:20:“Nanocrystalline zinc ferrite film understanding conversion into chemical fuels”, wound healing applications”, M.Ghanim, E-
the electrochemical performance of zinc ferrite films R.Geioushy, CMRDI, Egypt. Just, Egypt.
synthesized using electrodeposition”, E.M.El-Sayed, 17:50 – 18:10 “Low surface roughness ink- 17:50 – 18:10 “Ceramics in modern dentistry”,
CMRDI, Egypt. coated CuIn1-xGaxSe2 thin film for R.H.Elsayed, Alexandria University, Egypt.
18:20-18:40 Structural and electrical properties of Sn1- photovoltaic’s applications”, M.Ghali, E- 18:10 – 18:30 “Study the potential applications
xFexO2 ceramic nanoparticles”, S.A.Saleh, Sohag University, Just, Egypt. of magnesium alloys in biomedical implants”,
Egypt. A.M.El-Aziz,German University, Egypt.
18:40-19:00 “Nanosecond laser irradiation assisted the 18:30 – 18:50 “Fabrication and
improvement of structural, optical and thermal properties of characterization of Ti-12Mo/ ZrO2 composites
polyvinyl pyrrolidone/carboxymethyle cellulose blend filled by powder metallurgy for dental applications”,
with gold nanoparticles”, M.A.Morsi, Egypt-Russian A.El-Tantawy, Helwan University, Egypt.
University, Egypt.
2
Day 2: Tuesday 12/3/2019
Hall 1 Hall 2 Hall 3
09:00 – 11:00 Session 8
09:00 –09:30 Plenary Lecture 3 “The golden jubilee of cast iron research at CMRDI”, A.Nofal, CMRDI, Egypt.
09:30 – 10:00 Plenary Lecture 4 “Graphene nanocomposites for automotives: Status, challenges and roadmap”, A.Elmarakbi, UK.
10:00 – 10:30 Keynote Lecture 6 “Micro/meso-scale metal forming”, T.Makino, Japan.
10:30 –11:00 Research and Technical capabilities of the Egyptian Military Production Facilities, L. Shahata, Egypt
11:00- 11;20 EU- Research and Innovation program, Heba Gaber, EU- Regional Research and Innovation officer
11:20 – 11:50 Coffee Break
11:50 – 14:00 Session 9: Metals and Alloys 11:50 – 14:00 Session 10: Mineral 11:50 – 14:00 Session 11: Energy Production and
(II) Processing and Extractive Metallurgy(I) Storage (III)
11:50 -12:20 Keynote Lecture 7 11:50 -12:20 Keynote Lecture 8”African 11:50 – 12:20 “Nanostructured conducting polymers and
”Microstructural evolution and intermetallic natural resources for green industry applications”, M.Ayad, E-Just, Egypt.
formation in Zn-Mg hybrids processed by development in mineral value addition and 12:20 – 12:40 “Ultraviolet broadband plasmonic
high-pressure torsion”, C.J. Boehlerf, USA. metal extraction: A synergic approach”, absorber”, M.A.El-Aasser, Ain Shams University, Egypt.
12:20 – 12:40 “Effect of solution treatment and AF.Mulaba,South Africa. 12:40 – 13:00 “One-step fabrication of multi-doped
aging processes on wear behaviour of TC21 12:20 – 12:40 “Conventional iron reverse mesoporous TiO2 nanoparticles by self-assembly for
titanium alloy”, K.M. Ibrahim, CMRDI, Egypt. flotation process integrated with nanobubble water electrochemical splitting”, A.Elshazly, CMRDI,
12:40 – 13:00 “Rolling parameters and technology” ,D.Tao, China. Egypt.
niobium content versus grain refining in plant 12:40 – 13:00 “Reduction characteristics of 13:00 – 13:20 “Effect of inorganic doping on the
scale hot rolled low carbon steel”, A. El- high phosphorus iron ore in reducing thermoelectric behaviour of polyaniline nanocomposites”,
Kawas, Al Ezz Dekheila Steel Co., Egypt. parameters similar to blast furnace conditions”, M.K.Ali, E-Just, Egypt.
13:00 – 13:20 “ “Hot workability of 420 J1 H.Al-Kelesh, CMRDI, Egypt. 13:20 – 13:40 “Structural and capacitive properties of
martinsitic stainless steel”, T. Elbitar, CMRDI, 13:00 – 13:20 “Production of pure silicon from cathodically deposited manganese dioxide film of
Egypt. sand”, S.I.J. Al-Rubaiey, Iraq. electrophoretically deposited reduced grapheme oxide”,
13:20 – 13: 40 “Experimental and numerical 13:20 – 13:40 “The effect of conventional heat A.Abdel Moniem, E-Just, Egypt.
study of high-speed formability of an treatment on the magnetic properties of some 13:40 – 14:00 “Electrochemical Performance of
austenitic high –Mn TWIP steel”, A.Hamada, Fe and As-Cu bearing sulfide minerals”, A.El- graphene/CdO as negative electrode for lithium battery”,
E-Just, Egypt. Mahdy, CMRDI, Egypt. A.Shenouda, CMRDI, Egypt.
13:40 – 14:00 “Influence of heat treatment and 13:40 – 14:00 “Phosphorus removal from
loading rate on the fracture toughness of 421 Morupule Main Seam coal”, R.S.Tshipa, South
martinsitic stainless”, M.ElShazly, British Africa.
University, Egypt.
3
Day 2: Tuesday 12/3/2019 (continued)
Hall 1 Hall 2 Hall 3
14:00 – 15:00 Lunch
15:00 – 16:00 Poster Session 2
16:00 – 19:00 Session 12: Metals and Alloys 16:00 – 18:40 Session 13: Mineral 16:00 – 18:50 Session 14: Surface Engineering,
(III) Processing and Extractive Metallurgy (II) Coating and Corrosion
16:00 – 16:20 “Aging of structural austempered 16:00 – 16:20 “Surface modification of oil 16:00 – 16:30 Keynote Lecture 9 “Fluoride in the
ductile iron at lower temperature”, D.K.Mulabo, bubbles with surfactants and its effect on nuclear process its implication for metal
South Africa. lignite flotation”, X.Tao, China. corrosion”, L.Jouffret, France.
16:20 – 16:40 “Investigation of ADI machinability 16:20 – 16:40 00 “The possibilities of 16:30 – 16:50 “Hydrogen permeation properties
using ultrasonic assisted slot milling”, M.Hossam, extraction metallic calcium from Egyptian of Multi-layered-coatings”, M.Tamura, Japan.
E-Just, Egypt. Limestone Ore, M. El-Sadek, CMRDI 16:50 – 17:10 “Effect of pickling treatment on the
16:40 – 17:00 “Three generations micro-alloying 16:40 – 17: An Ecofriendly Process for Tin performance of electroless plating of Ni-B
steel processing: Thirty years of successive work Recovery as Nanostructured Powders from composite coating on AZ31 Mg alloy”, I.Ghayad,
at CMRDI”, M.El-Meligy, CMRDI, Egypt. Electronic Waste , Dina Abdo , CMRDI CMRDI, Egypt.
17:00 – 17:20 “Influence of nitrogen on oxidation 17:00 – 17:20 “Research on ultrafine 17:10 – 17:30 “Microstructure evolution of NiTi
resistance for automotive steel grades”, S.Ghali, particles classification using hydrocyclone magnetron sputtered thin film on different
CMRDI, Egypt. with annular rinse water”, T.Yougun, China. substrates”, I.El Mahallawi, Cairo University,
17:20 – 17:40 “Carbothermic reduction to produce 17:20 – 17:40 “Investigation of the Egypt.
ferrosilicoaluminium utilizing aluminium slag Composition and Structure of Tar by Lignite 17:30 – 17:50 “Stress corrosion cracking of AISI
solid waste”, A.Ahmed, CMRDI, Egypt. Pyrolysis Using TG/GC/MS, Li Feng, China 316L HP scrubber lining in urea plant: a case
17:40 – 18:00 “Casting and laser surface remelting 17:40-18:00 “Miniemulsion polymerization study”, M.M.Ghanem, CMRDI, Egypt.
of 316L stainless steel scrap, H.Elgazzar, CMRDI, for styrene in presence of exfoliated clay 17:50 – 18:10 “Synthesis of anti-corrosion
Egypt. platelets coated with charged molecules”, polymer from thiadiazole”, I.Yahiya, Iraq.
18:00 – 18:20 “A Monte Carlo simulator for the N.Greesh, Libya. 18:10 – 18:30 “Synthesis and characterization of
estimation of uncertainty of Brinell hardness”, 18:00 – 18:20 “A computational plasma polymerized thin films on stainless steel
A.A.Hawam, Tanta University, Egypt. investigation of un-conventional lone-pair using pulsed microwave (PECVD) method for
18:20 – 18:40 “Corrosion behaviour of Ti-7%Mn hole interactions of group V-VIII elements”, medical applications” S.Sbeta, Libya.
alloy in artificial saliva”, L.Zaki, Cairo University, E.M.Z.Telb, Minia University, Egypt. 18:30 – 18:50 “Improvement of Mathematical
Egypt. 18:20 – 18:40 “Quantum mechanical Model to Predict the Mechanical Properties and
18:40 – 19:00 “Aluminum surface inclusions of investigation of unconventional halogen – Corrosion rate of Friction Stir Welded 2024
insoluble Lead enhanced through mechanical halogen interactions”, N.A.M.Moussa, Minia Aluminum Alloy, Ibrahim Sabry, Modern
attrition of Al substrates’ ”, M.R.Ebrahim, University, Egypt. Academy For Engineering
National Research Center, Egypt.
4Day 3: Wednesday 13/3/2019
Hall 1 Hall 2 Hall 3
09:00 – 11:00 Session 15
09:00 –09:30 Plenary Lecture 5 “Piezoelectric materials and applications”, A.Safari, USA.
09:30 – 10:00 Plenary Lecture 6 “Development of novel nanocomposite coatings for industrial applications”,Z.A.Khan, UK.
10:00 – 10:30 Keynote Lecture 10 “High temperature chemical vapour deposition of aluminium nitride thin films and coatings: Properties and
applications”, M.Pons, France.
10:30 –11:00: Science Technology Development Innovation Fund in Egypt, Emad Hegazy, STDF Executive Director
11:00 – 11:30 Coffee Break
11:30 – 14:00 Session 16:Composite 11:30 – 13:50 Session 17: Catalysis, Water 11:30 – 13:30 Session 18: Mineral Processing and
Materials, Ceramics and Powder Treatment and Environment Studies (I) Extractive Metallurgy (III)
Metallurgy (I) 11:30 -12:00 Keynote Lecture 12 “Synthesis 11:30 – 11:50 “Production of value added aluminium
11:30 -12:00 Keynote Lecture 11 ”Influence of and modification of graphitic carbon nitride (g- compounds from aluminium surface cleaning
growing conditions on the reactivity of Ni C3N4) as a non-metal based photocatalyst – effluents”, E.A.Abdel Aal, CMRDI, Egypt.
supported graphene towards CO”, M.Rocca, hydrogen generation, oxidation of organic 11:50 – 12:10 “Thermal effect on crystal structure
Italy. pollutants, and polymeric nanocomposites”, and physical changes of synthetic silicate of group 2
12:00 – 12:20 Industrial Development in S.Rohani, Canada periods 3, 4 and 5 elements from spent fines of
Additive Manufacturing, Khaled Abdelghany, 12:00 – 12:20 “A facile synthesis of reduced finishing crystal glass industry”, M.Rabah, CMRDI,
CMRDI, Egypt graphene oxide supported CuS nanoparticles Egypt.
12:20-12:40 “Microstructure, mechanical and towards enhanced photocatalytic 12:10 – 12:30 “Assessing the ease of leachability of
tribological properties of nano (Cu-MoS2- performance”, S. ElHout, CMRDI, Egypt. trace elements from South African coal ash by weak
Graphene) composite for friction applications”, 12:20 – 12:40 “Study of the reduction of Fe on acid”, N.Tshiongo-Makgwe, South Africa.
O.A.Elkady, CMRDI, Egypt. reduced graphene oxide as a catalyst for 12:30 – 12:50 “Mechanical-chemical synthesis of
12:40 – 13:00 “Multiscale finite element carbon monoxide reduction”, H.Elnaggar, E- nanocrystalline manganese ferrite from low grade
analysis of mechanical and thermal properties Just, Egypt Egyptian manganese ore”, M.K.Abdel Rahman,
of titanium carbide particles reinforced 12:40 – 13:00 “Catalytic hydrothermal- CMRDI, Egypt.
aluminium matrix composite”, P.Nyanor, E- compressed carbonization technology for 12:50 – 13:10 “Atomistic study of structural
Just, Egypt. synthesis of carbon nanotubes from properties and new phase transitions of AgCl
13:00 – 13: 20 “Microstructure aspects of 7075 agricultural wastes”, N.Fathy, NRC, Egypt. materials using simulation method”, H.Rekab-Djabri,
Al-SiO2 composite foams produced by direct 13:00 – 13:20 “Batch method for removing of Algeria.
melt foaming method”, A. Daoud, CMRDI, Cu ions from waste water using nanosuper- 13:10-13:30 Application of banana peels as an
Egypt. magnetic Fe3O4 and NiO”, S.Suliman, Sudan adsorbance for uranium from Abu-Thor gibbsite
13:20 – 13:40 “Fabrication and microstructure 13:20 – 13:40 “Use of Bivalves and sulfate leach liquor, Wael M. Fathy, Al-Azhar Univ.
of automotive brake rotor made of AlSi Crustacean wastes from Port Said coasts as 13:30-13:50 “Characterization of the microstructure
composites”, F.M.Firouz, CMRDI, Egypt. biosorbents for water pollutants”, A.M.G. El- of WC-Co cemented carbide elaborated by two
13:40-14:00 Discussions. Garhy, Port Said University, Egypt. methods: Liquid-phase sintering and hot isostatic
13:40-14:00 Discussions pressing”, H.Rabouhi, Algeria.
13:50-14:00 Discussions
5Day 3: Wednesday 13/3/2019 (continued)
Hall 1 Hall 2 Hall 3
14:00 – 15:00 Lunch
15:00 – 16:00 Poster Session 3
16:00 – 18:40 Session 19:Composite Materials, 16:00 – 18:30 Session 20: Catalysis, 16:00 – 19:00 Session 21: Welding Technology
Ceramics and Powder Metallurgy (II) Water Treatment and Environment 16:00 -16:20 “Laser Beam and Friction Stir
16:00 – 16:20 Advance Numerical simulation techniques of Studies (II) Welding of Armor Steels, ” A.El-Batahgy,
metal removal in micro laser drilling, Mohsen Abdel- 16:00 – 16:30 Keynote Lecture CMRDI, Egypt.
Naeim, E-Just 13”Recent advances in nanomaterials 16:20 – 16:40 “Mechanical properties of the
16:20: 16:40 “Microstructure and wear behaviour of for water remediation”, E.Rauwel, friction stir welding parameters on fatigue
squeezed Mg alloy (AM100) based composites reinforced Estonia. properties in similar joints of aluminium alloys”,
with ZrB2, C or hybrid of ZrB2 and C particles”, M.T.Abou 16:30-16:50 Photocatalysis: M.Abbas, Iraq.
El-Khair, CMRDI, Egypt. Mechanism and Applications, Said 16:40 – 17:00 “Effect of welding processes on
16:40 – 17:00 “Surface roughness of nanohybrid ElSheikh, CMRDI mechanical and microstructural characteristics of
composites with different monomers after finishing and 16:50-17:10 “Green synthesis of gold DP780 steel welded joints for automotive
polishing with different polishing systems”, Y.Soliman, nanoparticles”, R.El-Sayed, National industry”, K.M.Hafez, CMRDI, Egypt.
Alexandria University, Egypt. Institute of Standards, Egypt. 17:00 – 17:20 “Elimination of failure causing
17:00-17:20 “Development of A1-5Cu/B4C composites 17:10 – 17:30 “Production activity of polygonal ferrite by aluminium in silicon free TRIP
with low coefficient of thermal expansion for automotive BiVO4 nanocomposite modified by steel”, A.ElSherbiny, Cairo University, Egypt.
application, Ahmed Lotfy Mohammed Mostafa, CMRDI MCM-41: as advanced anostructured 17:20 – 17:40 “Mechanical properties of the
photocatalysts for water purification”, friction stir welding of the aluminium alloy 6061-
17:20-17:40 “Green synthesis of Antibacterial: A novel F.T.Al-Sharifi, Yemen. T6”, K.Salman, Iraq.
nanocomposite from polyvinyl alcohol, polyaniline/Ag, 17:30-17:50 “Photocatalytic 17:40 – 18:00 “Microstructure and mechanical
Neama Ahmed Sobhy Ahmed, Housing & Building Performance of MoS2 nanosheets in properties of laser surface melted AISI 01 tool
National Research Center CO2 conversion into hydrocarbon”, steel”, M.Newishy, CMRDI, Egypt.
Islam M. Hegazy, CMRDI 18:00 – 18:20 “FEM prediction of transient
17:40-18:00 “Effect of Ballizing process on hole temperature distribution in friction stir welding of
characteristics drilled on polycarbonate strips: An 17:50 – 18:10 “Detection furunculosis
dissimilar aluminium alloys”, I.T.Omar, Assiut
experimental investigation”, E.A.Showaib, Tanta disease in fish using the machine
University, Egypt.
University, Egypt. learning decision tree classifier
18:20 – 18:40 “Optimization of mechanical
18:00:18:20 “Effect of changing chemical composition via empowered by LDA, E.Mohamed,
properties and microstructure characteristics by
adding different interlayer strip width values of AA7075 on Beni-Sueif University, Egypt.
vertical compensation friction stir welding for 7020
similar butt joints of AA2024 by friction stir welding 18:10-18:30 Comparative study of the
& 2024 aluminium alloys”, H.A. Abdel-Aleem,
technique”, M.Abu-Okail, Sohag University, Egypt. PVDF nano-fibrous membrane
CMRDI, Egypt
18:20:18:40 “Microscopic and metallurgical studies as a fabricated by electro-spinning and the
18:40 – 19:00 “Weldability of dual steel containing
function on forensic investigation of electrical fires”, flat-sheet membrane by conventional
boron”, M.A.Morsy, CMRDI, Egypt.
S.Khafagy, Tebeen Institute for Metallurgical Studies, method, their physical
.
Egypt properties, performance and
application in the desalination plant,
R.Atya, Cairo University, Egypt.
19:00 – 19:30 Closing and Recommendations
6WORLD ASSOCIATION OF INDUSTRIAL & TECHNOLOGICAL RESEARCH ORGANIZATIONS
You can also read
