Kautschuk-Herbst-Kolloquium 6 - November 2018 November 6 - 8, 2018 - 13th Fall Rubber Colloquium
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
13. Kautschuk-Herbst-Kolloquium
6. - 8. November 2018
13th Fall Rubber Colloquium
November 6 - 8, 2018
Deutsches Institut für Kautschuktechnologie e. V.
Hannover, Germany
Page 1 of 13 as of November 9, 2018
Scientific Program
Page 2 of 13 as of November 9, 201813th Fall Rubber Colloquium
November 6 - 8, 2018
Tuesday, November 6, 2018
Opening ceremony
10:30 U. Giese
10:40 S. Johannsen
Lower Saxony Ministry of Science and Culture
11:10 T. Nishi
Tokyo Institute of Technology
International ultimate behavior investigation of various elastomeric
seismic-protection isolators for buildings
11:40 R.H. Schuster
Dual Filler Networks - a potential route to better Performance
12:10 I. Hudec
Slovak University of Technology
Sulfur and peroxide curing of rubber compounds based on NR and NBR
Page 3 of 13 as of November 9, 2018Tuesday, November 6, 2018
Session 1 Session 2 Session 3
Materials Environment - Simulation
Chairperson: M. Galimberti. Sustainabilty Chairperson: N. Kröger
Chairperson: H. Geisler
13:45 D.-M. Bielinski E. Peuvrel-Disdier C. Zimmermann
Politechnika Lodzka MINES-ParisTech, PSL Research University, Institut für Kunststoffverarbeitung
Ceramizable rubber composites. Possibilities and CEMEF Modeling of the temperature-dependent visco-
challenges Analysis of an industrial thermo-mechanical elasto-plastic material behaviour of thermoplastic
devulcanization process elastomers
14:20 A. Das A. Neige A. Ricker
Tampere University Of Technology LRCCP Deutsches Institut für Kautschuktechnologie e.V.
Water-responsive Rubber Composites BIOPROOF project: Recovered carbon blacks as Hyperelastic Modelling and Experimental
new raw material for rubber applications Characterisation of Cellular Rubber
14:55 P. Posadas I. Weilert M. Ludwig
Institute of Polymer Science and Technology Deutsches Institut für Kautschuktechnologie e.V. Toyoda Gosei Meteor GmbH
Advanced characterization of novel Ionic Polysaccharides – An interesting category of Pratical Difficulties Modelling Elastomeric Foams
elastomers by a combination of different reinforcing fillers (and Solutions)
experimental techniques
Page 4 of 13 as of November 9, 2018Tuesday, November 6, 2018
Session 1 Session 2 Session 3
Reinforcement Physics Vulcanization
Chairperson: H. Geisler Chairperson: J. Meier Chairperson: H.-J. Weidenhaupt
15:55 J. Noordermeer R. Hjelm L. Klafke de Azeredo
University of Twente New Mexico Consortium Dätwyler Sealing Solutions
Silica Reinforced Natural Rubber: Synergistic Interrelation of molecule scale polymer melt A more efficient calculation of vulcanization time
Effects by Addition of Small Amounts of response to shear and rheology in the non-linear from the use of isothermal and non-isothermal
Secondary Fillers to Silica-Reinforced Natural rheological domain kinetics for EPDM based rubber compounds with
Rubber Tire Tread Compounds different types of peroxides
16:30 M. Staropoli S. Kheirandish B. Basterra Beroiz
Luxembourg Institute for Science and Technology Arlanxeo Deutschland GmbH Goodyear Innovation Center Luxembourg
Structural evolution of silica filler clusters in SBR Non-Linear Strain Measures and Elongational Network structures in carbon black filled rubbers:
under quasi-static deformation Rheology of Branched Butadiene-Based Towards a quantitative analysis
Polymers
17:05 W. Kaewsakul F. Kremer A. Blume
University of Twente University of Leipzig Evonik Resource Efficiency GmbH
Influence of silane modifiers with different Molecular dynamics at external and internal Determination of the crosslink density of tire tread
functionalities on silica-filled NR compounds nanometric constraints compounds – Which analytical method delivers
the most reliable results?
Following the lectures POSTER SESSION
Page 5 of 13 as of November 9, 2018Wednesday, November 7, 2018
Session 1 Session 2 Session 3
Aging and Lifetime Processing Analysis
Chairperson: M. van Duin Chairperson: B. Klie Chairperson: D. Bielinski
08:30 U. Giese S. Teich J. Ludwig
Deutsches Institut für Kautschuktechnologie e.V. Deutsches Institut für Kautschuktechnologie e.V. Ludwig Nano Präzision GmbH
Aging stability of sealing materials in lubricants The influence of the rubber recipe on the Determination of spatially resolved elastomer
adhesion between PA and EPDM in a multi- parameters by the method of Micro-Indentation
component injection molding process
09:05 N. Meghiref S. Kammer E. Euchler
LRCCP Institut für Kunststoffverarbeitung Leibniz-Institut für Polymerforschung Dresden
Multi-scale and multi-technique analysis of Efficiency analysis of different continuous Exploring the failure behavior of rubber
acrylonitrile content on the thermal aging of vulcanization types vulcanizates under constraint conditions via
peroxide cured HNBR small-angle-X-ray-scattering
09:40 M. Hemstede-van-Urk S. Breithaupt Y. Aoyagi
ARLANXEO Netherlands B.V. Deutsches Institut für Kautschuktechnologie e.V. Freudenberg Technology Innovation SE & Co.
Therban HT - a plastic re-inforced HNBR with Application of LIBS to analyze the distribution of KG / DIK
improved high temperature properties mixing additives The analysis of aging processes of EPDM-
elastomers using low field NMR and stress
relaxation measurements
Page 6 of 13 as of November 9, 2018Wednesday, November 7, 2018
Session 1 Session 2 Session 3
Reinforcement Processing Analysis
Chairperson: J. Noordermeer Chairperson: B. Klie Chairperson: K. Nakajima
10:40 W. Dierkes G. Nijman M. Wilhelm
University of Twente KraussMaffei Berstorff GmbH Karlsruhe Institute of Technology (KIT)
Silane-grafted natural rubber as compatibilizer in Rubber extrusion screw lay out based on Medium Resolution 1H-NMR at 62 MHz as
silica-reinforced natural rubber rheological behavior of the material. Chemically Sensitive Online Detector for Size
Exclusion Chromatography (SEC–NMR)
11:15 I.H. Syed S. Kammer F. Grunert
Continental Reifen Deutschland GmbH Institut für Kunststoffverarbeitung (IKV) University of Twente
Characterizing the influence of reinforcing resin Optimization of screw geometry for silicone Comparison and Evaluation of Different Analytical
on the mechanical response of filled elastomers extruder considering wall slip behaviour Methods to Predict the In-Rubber Dispersibility of
Silica
11:50 N. Gundlach S. Kammer D.H.C. Wong
Bergische Universität Wuppertal Institut für Kunststoffverarbeitung (IKV), RWTH Eastman Chemical Company
Modelling Filler Dispersion in Elastomers: Aachen Evaluation of Sulfur Dispersion using Population
Relating Filler Morphology to Interface Free Foam extrusion of elastomers using water as Survival Analysis
Energies via SAXS and TEM Simulation Studies physical blowing agent
Page 7 of 13 as of November 9, 2018Wednesday, November 7, 2018
Session 1 Session 2 Session 3
Simulation Materials Materials
Chairperson: M. Klüppel Chairperson: S. Kawahara Chairperson: R. Schuster
13:20 H. Baaser M. Galimberti M. Martinez Velencoso
Univ. of Applied Sciences Bingen Politecnico di Milano Kuraray Europe GmbH
Constructing the Transfer Function of any Facile and sustainable functionalization of sp2 Modified Compound Characteristics with Liquid
Topology of Rheological Elements by Numerical carbon allotropes, as fillers for rubber composites Rubber
Laplace Transformation
13:55 K.N. Vu P. Bernal Ortega M. De Greiff Palacio
Department of Continuum Mechanics, RWTH Institute of Polymer Science and Technology Proantex S.A.S
Aachen University Sulfur-modified carbon nanotubes for the Skim-Latex: Is it really the source of low
Physically-based modeling of strain-induced development of advanced elastomeric materials specification rubber?
crystallization in natural rubber
14:30 C. Krauter A. Shakun B. Pary
Schrödinger GmbH Tampere University of Technology The 3D Dandelion concept: a paradigm change
Unravelling critical polymer properties with Study of material-related losses in nanodiamond- to establish a financially viable alternative to
efficient computational approaches rubber composites Hevea Natural Rubber
15:05 H. Wulf M. Omelan J. Stumbaum
Chemnitz University of Technology Deutsches Institut für Kautschuktechnologie e.V. Arlanxeo Deutschland GmbH
Using an abstract model of rubber microstructure Development of PDMS nanocomposites for Therban® with improved media resistance and
to predict rubber compound properties neuro-medical application low temperature flexibility
Page 8 of 13 as of November 9, 2018Wednesday, November 7, 2018
Session 1 Session 2 Session 3
Materials Analysis Vulcanization
Chairperson: H. Geisler Chairperson: I. Chodak Chairperson: A. Blume
16:05 W. Rahimi K. Nakajima M. van Duin
Thermodynamical approach to determine the Tokyo Institute of Technology Keltan R&D, ARLANXEO Performance Elatomers
adhesion of plasma polymers on various rubber Viscoelasticity of rubbers investigated by Sulfur vulcanisation of low- and high-unsaturated
vulcanizates nanorheological AFM rubbers (IIR & EPDM vs. NR & BR)
16:40 L. Rodriguez-Guadarrama C. Karl H.-J. Weidenhaupt
Dynasol Group Fakultät für Bauingenieurwesen und Geodäsie, LANXESS Deutschland GmbH
In-chain Functionalized SEBSs for Rubber-Silica ForWind/Leibniz-Universität Hannover The Way to Improve Network Performance
Network Wetting of elastomer surfaces
17:15 M. Boomhoff E. Ueda E. Cansell
Trinseo Deutschland GmbH Zeon Corporation ArianeGroup
Functionalized SSBR for Fuel Efficient & Safe Nanorheological atomic force microscope for Study of vulcanization bonding process'
Tires silica-filled SBR vulcanizes mechanisms of natural rubber onto metallic
substrates
19:00 SOCIAL EVENT
Page 9 of 13 as of November 9, 2018Thursday, November 8, 2018
Session 1 Session 2 Session 3
Analysis Processing Physics
Chairperson: T. Nishi Chairperson: G. Nijman Chairperson: J. Meier
08:30 N.N. J.-U. Walter I. Chodak
Universität Paderborn, Kunststofftechnik Polymer Institute of the Slovak Academy of
Paderborn (KTP) Sciences
Scale Up of "Garvey-die" test setup Behavior of mixtures of various rubbers with
electroconductive carbon blacks under cyclic
mechanical stress
09:05 D. Nichetti J. Jennissen M. Kröger
Rheonic srl RADO Engineering GmbH IMKF - TU Bergakademie Freiberg
Oscillating Shear Capillary Rheometry (OSCAR) Strainer process issues Roughness influence on adhesion
of Rubber Compounds
09:40 M. Yazici A. Lipski M. Jaunich
Uludag University Engineering Faculty, Institute of Plastics Processing (IKV) in Industry Bundesanstalt für Materialforschung und –
Automotive Eng. Dept. and the Skilled Crafts at RWTH Aachen prüfung (BAM)
Investigation of the Crack Propagation in The University Low temperature properties of rubber seals -
Graphene/Elastomer Nanocomposite Materials Flow paths in a tangential internal mixer – Influence of crystallite formation on seal
with DIC Technique Visualization and analysis for an optimized mixing performance -
Page 10 of 13 as of November 9, 2018Thursday, November 8, 2018
Session 1 Session 2 Session 3
Simulation Reinforcement Tires
Chairperson: H. Baaser Chairperson: G. Heinrich Chairperson: W. Dierkes
10:40 C. Liu H. Westenberg E. Borchardt
Beijing Univ. of Chemical Technology Orion Engineered Carbons GmbH Continental Reifen Deutschland GmbH
Fabrication of advanced elastomer Tuning electrical conductivity by applying a Processing behaviour of highly filled SBR
nanocomposites designed by computer tailored carbon black morphology compounds - A lab evaluation using the 'Garvey-
simulation towards extremely energy-saving tires die' test setup
11:15 S. Gelke A. Bernardi M. Heinz
Chemnitz University of Technology Politecnico di Milano Evonik Resource Efficiency GmbH
A material model for the thermomechanical Facile and sustainable functionalization of carbon Influence of Polymer Type, Filler Property and
simulation of rubber black, as filler for rubber composites Coupling System on Crosslink Density of
Summer Tire Tread Compounds
11:50 C. Penisson R. Hickmann U. Hong
BMW Group TU Dresden, ITM Hyundai Motor Company
Designing rubber subframe mounts in the pre- Innovative hybrid-yarns for textile reinforced Study on the effect of aging on the internal parts
development phase elastomer components of tires
Page 11 of 13 as of November 9, 2018Thursday, November 8, 2018
Session 1 Session 2 Session 3
Materials Aging and Lifetime Tires
Chairperson: I. Hudec Chairperson: U. Giese Chairperson: M. Klüppel
13:20 S. Kawahara B. Schrittesser F. Grasso
Nagaoka University of Technology Polymer Competence Center Leoben GmbH Versalis S.p.A.
Preparation and Mechanical Properties of Natural Effect of swelling and thermal induced ageing of Developing solutions for truck tyres
Rubber with Nanodiamond Nanomatrix Structure HNBR in oil and gas field applications
13:55 H. Murakami H. Benning J. Vervelde
Nagasaki University Baker Hughes, a GE company Kraton Chemical B.V.
Thermal and Elastic Properties of Polyurethanes Elastomer Development for Oil Based Mud The influence of tread enhancement additives on
Crosslinked by Polyroaxanes Moineau Motors the performance of filled tread compounds – an
insight into the effect of SYLVATRAXX™
14:30 N. Rennar B. Karaagac R. Stocek
formerly: University of Applied Sciences Kocaeli University, Chemical Engineering PRL Polymer Research Lab, s.r.o.
Würzburg Department Influence of loading force on resistance against
Synthesis, Structure, and Properties of Rigid Rod Improved Crosslink Structure and Thermal chipping and cutting phenomena of fundamental
Networks Resistance of EPDM Formulations rubber materials
15:05 G. Heinrich M. Achenbach F. Abraham
Leibniz-Institut für Polymerforschung Dresden Ingenieur- und Sachverständigenbüro Achenbach University of Plymouth
e.V. GbR Abrasion Resistance and Fatigue Crack Growth
Ionic modification and weak cross-links in Life Time Prediction of Seals by Numerical in Dependence of Recycled Tyre Filler Content
polymer networks: a new paradigm for robust Simulation and its Interface Morphology
rubbers?
15:45 CLOSING REMARKS
Page 12 of 13 as of November 9, 2018See you in Hannover
Deutsches Institut für Kautschuktechnologie e.V.
Eupener Straße 33
D-30519 Hannover
Phone: +49 511 84201-17
khk@dikautschuk.de
www.dikautschuk.de
Page 13 of 13 as of November 9, 2018You can also read
