RIM MOUNTED AND DUAL ACCESS LOCKS
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
RIM MOUNTED AND DUAL ACCESS LOCKS
Introduction
Introduction Guarantee
UNION offers a range of rim-mounted and dual UNION products are guaranteed for 1 year from
access locks, which are ideal for commercial and the date of purchase against mechanical faults
residential use. arising from defects in materials or design. In the
unlikely event of your UNION product failing as a
The range includes rim locks and nightlatches as well
result of defective materials or design a
as a choice of two dual access devices to suit the
free replacement product will be provided.
particular application.
It is a condition of this guarantee that your UNION
product:
Note • Has been correctly installed and maintained
in accordance with the instructions
provided to you at the time of purchase
• Has not been modified in any way
We have made every effort to ensure that at the time
of going to print all information in this catalogue is
correct. However, in our efforts to continually improve This guarantee does not apply to mechanical faults
our products and offer only the highest levels of caused wilfully or negligently, or to the surface finish
security and quality we reserve the right to make of your product.
alterations to the product specifications shown in
this catalogue. Proof of purchase must be submitted when making
a claim under this guarantee and all claims must
All dimensions provided within this catalogue are be submitted within 2 months of you discovering
approximate and for guidance only. the mechanical fault of your UNION product.
Grading of Locks
Commercial Grade Locks
Commercial Grade locks are the premier range and are recommended for use in all applications e.g. Residential,
Private Sector, Commercial Office, Retail and Entertainment Complexes and the whole spectrum of Public Sector
Developments. These locks are of superior engineering design, robust construction, use thicker gauge metals
and are subject to stringent testing. Their performance is guaranteed subject to correct application.
Standard Grade Locks
‘Standard’ Grade locks are designed to meet the demand for lower cost locks by Private and Public Sector
developers who need to meet strict budgetary constraints. The locks are “value engineered” to meet functional
requirements at reduced costs. The performance of this range will be inferior to that of “Commercial” Grade locks
and ASSA ABLOY do not guarantee their performance in high traffic situations and in conditions where they could
be subject to abuse. Caution should be exercised when using these locks in combination with heavy unsprung or
poorly sprung lever handles.
Keying Options
To Differ (i.e. Standard) Keyed Alike
“To Differ (i.e. Standard)” – indicates locks can be “Keyed Alike” – indicates that designated locks can
supplied with a standard range of different keys. be manufactured to be operated by a single standard
This range varies from 18 in the case of certain 2 key. Locks are described as being “Keyed Alike to
lever locks to 500 in the case of certain 5 lever locks. Standard Differs”. Alternatively designated locks
The range of different keys available with Pin tumbler under a Master Key or Grand Master Key system
cylinders is approximately 5000. can also be keyed alike. These are described as
being “Keyed Alike under Master Key” or “Keyed
Alike under Grand Master Key”.
Master Keyed Grand Master Keyed
“Master Keyed” – indicates that designated locks can “Grand Master Keyed” – indicates that designated
be operated by two different keys, one, the “Servant locks can be operated by three or more different keys,
Key” operates individual locks, whilst the “Master one, the “Servant Key” operates individual locks whilst
Key” operates all locks. (This group of locks are referred the “Grand Master Key” operates all locks. (The locks
to as a “Suite”, hence the term “en-suite” locks). There can be grouped into two or more different “Sub Suites”
are limitations to the number of locks that can be where a “Sub Master Key” opens those in a particular
master keyed in a single suite. We recommend that Sub Suite). The term “en-suite” is also applied to locks
you consult your ASSA ABLOY technical sales in this configuration. There are limitations to the number
consultant in this regard. For a schematic representation of locks that can be master keyed in a single suite
of a Master Keyed system refer to figure 1. and to the number of Sub Suites in such a system.
We recommend that you consult your ASSA ABLOY
technical sales consultant in this regard. For a
schematic representation of a Grand Master Keyed
system refer to figure 2.
Specifiers need to clearly document the intended Keying Option. Schematic representations as illustrated in Figures 1
and 2 are recommended. Alternatively this can be done in tabular form, an example of this method is illustrated in figure
3. (Attached please find a laminated blank table, for your use).
Grand Master Key
Master Key Sub Master Key A Sub Master Key B
Lock 1 Lock 2 Lock 3 Lock 1 Lock 2 Lock 3 Lock 4 Lock 5 Lock 6
Master Keyed - Figure 1 Grand Master Keyed - Figure 2
Only locks having identical mechanisms can be keyed into a common Keying System, i.e. “Master
Keyed”, “Grand Master Keyed” or “Keyed Alike”. To assist the specifier in identifying locks with identical
Keying Systems, we have introduced different coloured symbols in the Cylinder Selection Chart as
well as in the Specification Tables, on the following pages. Locks with identical mechanisms will have
identical coloured symbols
1
2
ATTENTION! It is essential to indicate beforehand any possible future extensions to the keying plan
Figure 3
Common Keying System Symbols
Locks or cylinders
ART. N.
2x18SCGMK
2x18SCGMK
2x18SCGMK
2x18SCGMK
1x1PLGMK
1x1PLGMK
The World’s Leading Lock Group
KEYING PLAN
Pin Tumbler Cylinder (different from above)
Pin Tumbler Cylinder
Qty.
1
1
1
1
1
1
PROJECT
PREMISES REF.
ARCHITECT
DRAWN UP BY
Lock 1
Lock 2
Lock 3
Lock 4
Lock 5
Lock 6
KEY - Ref. Qty. USED BY No.
Grand Master 2 General Manager
Sub Master A 2 Operations Manager
Sub Master B 2 Admin Manager
Lock 1 2 Storeman
Lock 2 2 Assembly Foreman
Lock 3 2 Production Foreman
Lock 4 2 Receptionist
Lock 5 2 Debtors Clerk
Lock 6 2 Creditors Clerk
KEYS
Keying Plan
Cylinder Selection Chart
Keyed to
Master
Master
Keyed
Keyed
Keyed
Grand
Differ
Alike
Circular Cylinders
1x1
Material and Finishes: 1x1CH 1x1CHKA 1x1CHMK 1x1CHGMK
Brass - CH (Chrome) 1x1PL 1x1PLKA 1x1PLMK 1x1PLGMK
PL (Brass Polished) 1x1SC 1x1SCKA 1x1SCMK 1x1SCGMK
SC (Satin Chrome)
1x300
Material and Finishes:
Brass - PL (Brass Machined) 1x300PLKA 1x300PLMK 1x300PLGMK
NP (Nickel Plated) Not Applicable 1x300NPKA 1x300NPMK 1x300NPGMK
3
AL6CAMP-AS
Campus Lockset
AL6CAMP-AS Campus Lockset complete and including:
AL6SA67-05ASCAM Campus Sable Furniture (pair)
L-22316-76/25SS Euro Profile Cylinder Lock case with Drawback Latch
2x815 Euro Profile knob Cylinder
UN334000000000 40mm Brass Padlock (optional - recommended padlock for
purchase by room occupant)
Grading
• Standard Quality
Application
• Suitable for single action doors, hinged left and right
• Suitable for doors from 40mm to 50mm thick
• Designed for use as bedroom door lock in hostel/
residence facilities
• Most suited to these facilities in the higher and tertiary
education sectors
• Most suited to single bedrooms
• Incorporates “dual-locking” (ie occupant of bedroom
and residence administration have separate means
of locking and unlocking the room)
• This affords the residence administration simpler
key management as the room occupants take
responsibility for the management of their own keys
Operation
• Lockset is locked and unlocked by occupant by
means of a standard 40mm padlock
• With the padlock removed, the lever handle can be
depressed to unlatch the door
• Lockset can be locked and unlocked from the inside
by occupant using the knob turn of euro profile knob
cylinder
• The Administration’s Control Key can be a Master
Key, Grand Master Key or Pass key (in the case of a
Keyed Alike system)
• Locking the deadbolt from outside using Control Key
can be used to “lock out” occupant and secure room
in locked position even with padlock removed
4
AL6CAMP-AS
EXTERNAL VIEW - LEFT HAND LOCKSET
INTERNAL VIEW EXTERNAL VIEW (PADLOCK NOT SHOWN)
Specifications
Product References AL6CAMP-AS
Lock Forend and Striking Plate Finish SS Stainless Steel
Latch Bolt Brass (handing reversible)
Dead Bolt Brass
Cylinder Type and Finish 2x815NP (Nickel Plated)
Cylinder Keying Options Available Keyed Alike, Master Keyed and Grand Master Keyed
PWD Reference Number Not Applicable
5
1487
Reslok
1487 Reslok Complete (excluding padlock)
UN3340407000 40mm Brass Padlock (For purchase by
Residence Administration and issuing to room occupant)
Grading
• Commercial Quality
Application
• Suitable for single action doors, hinged left
and right
• Suitable for doors from 40mm to 50mm thick
• Designed for use as bedroom door lock in
hostel/residence facilities
• Most suited to these facilities in the higher
and tertiary education sectors
• Most suited to single bedrooms
• Incorporates “dual-locking” (ie occupant of
bedroom and residence administration have
separate means of locking and unlocking
the room)
• This affords the residence administration
simpler key management as the various room
occupants take on the responsibility for the
management of their own keys
6
1487
Operation
• Reslok knob is locked and unlocked by the
occupant by means of a special padlock with
removable shackle
• With padlock removed, knob can be rotated
thereby unlocking the door
• Administration unlock using their Control Key
in the circular Reslok cylinder
• Reslok can be locked by administration by
turning Control Key 360°. This can be used
to “lock out” occupant and secure room in ILLUSTRATES NIGHTLATCH
locked position even with padlock removed FIXED TO RIGHT HAND DOOR
• The Administration’s Control Key can be a
Master Key, Grand Master Key or Pass key
(in the case of a Keyed Alike system)
Specifications
Product References 1487
Reslok Body Material and Finish Pressed Steel (Brown Powder Coated)
Nightlatch Material and Finish Pressure Die Cast Zinc Alloy - Gold Powder Coated
Latch Hard Gold Anodised Aluminium Alloy with Anti-Credit Card Feature
Cylinder Type and Finish 1x1SD (Brass Sanded)
Cylinder Keying Options Available Keyed Alike, Master Keyed and Grand Master Keyed
PWD Reference Number Not Applicable
7
1022
Cylinder Rim Night Latch
1022 Anti Credit Card Night Latch with 1x1 Cylinder
L-1022 Anti Credit Card Night Latch without Cylinder
1x1 Circular Cylinder (specify with L-1022 as required)
1x300 Circular Cylinder (specify with L-1022 as required)
Grading
• Standard Quality
Application
• Suitable for single action doors, hinged left
and right
• Suitable for doors from 32mm to 50mm thick
Standards
• SABS approved
Specifications
Product References 1022G (including 1x1SD cylinder), L-1022G (without cylinder)
Case and Staple Material Pressure Die Cast Zinc Alloy
Finish 1022G (Gold Powder Coated)
Latch Hard Gold Anodised Aluminium Alloy with Anti-Credit Card Feature
1x1 - SC (Satin Chrome), CH (Chrome), PL (Polished Brass) and
Cylinder Type and Finish SD (Brass Sanded - supplied as standard with 1022G)
1x300 - NP (Nickel Plated), PL (Machined Brass)
Cylinder Keying Options Available Keyed to Differ (ie Standard), Keyed Alike, Master Keyed or Grand
Master Keyed
Key Differs ±5000 Standard Differs
PDW Reference Number Not Applicable
81448
Ri m Lock
1448 Rim Lock only
1448-5248 Rim Lock with Plastic Knob Furniture 5249PL
5248 Plastic Knob Furniture only
5249 Pressed Brass Knob Furniture only
(specify with 1448 as required)
5248PX
Grading
• Standard Quality
Application
• Suitable for single action doors, hinged left
and right, opening inwards only
• Suitable for doors from 32mm to 50mm thick
1448BJ
Specifications
Product References 1448BJ - Rimlock only
1448-5248PX - Rimlock with Standard Plastic Knob Furniture
Case and Staple Material Pressed Steel
Rim Lock Finish 1448BJ (Black Powder Coated)
Latch Brass
Dead Bolt Aluminium - Gold Anodised
Keying Options Available Keyed to Differ (ie Standard)
Differs 12 Standard Differs R4F to R15F
Knob Furniture Material and Finish 5248PX - Brown Plastic - supplied as standard with 1448-5248PX
5249PL - Pressed Brass Polished
PWD Reference Number Not Applicable
91445
Rim Lock
1445 Rim Lock only
5249 Pressed Brass Knob Furniture only (specify with 1445 as required)
Grading
• Standard Quality
Application
• Suitable for single action doors, hinged left
and right, opening inwards only
• Suitable for doors from 32mm to 50mm thick
1445BJ
5249PL
Specifications
Product References 1445BJ - Rimlock only
Case and Staple Material Pressed Steel
Rim Lock Finish 1445BJ (Black Powder Coated)
Latch Bolt Brass
Dead Bolt Brass
Keying Options Available Keyed to Differ (ie Standard)
Differs 10 Standard Differs R4F to R13F
Knob Furniture Material and Finish 5249PL - (Pressed Brass Polished)
PWD Reference Number Not Applicable
10Notes
Notes
Notes
You can also read
