Summary of product characteristics for a biocidal product family - ECHA
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Summary of product characteristics for a biocidal product
family
Family name: SALVESAFE A
Product type(s): PT02 - Disinfectants and algaecides not intended for direct application to humans or
animals (Disinfectants)
PT04 - Food and feed area (Disinfectants)
PT01 - Human hygiene (Disinfectants)
Authorisation number: EU-0006622-0000
R4BP 3 asset reference number: EU-0006622-0000Table Of Contents
Part I.- First information level
1
1. Administrative information
1
2. Product family composition and formulation
5
Part II.- Second information level - meta SPC(s)
5
1. Meta SPC administrative information - META SPC n°1: Disinfectants for hands and all washable
hard surfaces 5
2. Meta SPC composition
6
3. Hazard and precautionary statements of the meta SPC
6
4. Authorised use(s) of the meta SPC
6
5. General directions for use of the meta SPC
13
6. Other information
15
7. Third information level: individual products in the meta SPC
15
1. Meta SPC administrative information - META SPC n°2 : Disinfectants for all washable hard surfaces
(with virudical claim) 16
2. Meta SPC composition
17
3. Hazard and precautionary statements of the meta SPC
17
4. Authorised use(s) of the meta SPC
17
5. General directions for use of the meta SPC
21
6. Other information
22
7. Third information level: individual products in the meta SPC
22
1. Meta SPC administrative information - META SPC n°3: Disinfectants for all washable hard surfaces
(without virudical claim) 29
2. Meta SPC composition
30
3. Hazard and precautionary statements of the meta SPC
30
4. Authorised use(s) of the meta SPC
30
5. General directions for use of the meta SPC
34
6. Other information
35
7. Third information level: individual products in the meta SPC
35
1. Meta SPC administrative information - META SPC n°4 : Disinfectants for hands
37
2. Meta SPC composition
373. Hazard and precautionary statements of the meta SPC
37
4. Authorised use(s) of the meta SPC
38
5. General directions for use of the meta SPC
39
6. Other information
40
7. Third information level: individual products in the meta SPC
41
1. Meta SPC administrative information - META SPC n°5: Algaecides
43
2. Meta SPC composition
44
3. Hazard and precautionary statements of the meta SPC
44
4. Authorised use(s) of the meta SPC
44
5. General directions for use of the meta SPC
46
6. Other information
47
7. Third information level: individual products in the meta SPC
47Part I.- First information level
1. Administrative information
1.1. Family name
SALVESAFE A
1.2. Product type(s)
PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
PT04 - Food and feed area (Disinfectants)
PT01 - Human hygiene (Disinfectants)
1.3. Authorisation holder
Name SALVECO S.A.S.
Name and address of the
authorisation holder Avenue Pierre Mendès-France Z.A. Hellieule 4 F 88100 SAINT DIE
Address
DES VOSGES France
Authorisation number EU-0006622-0000
R4BP 3 asset reference
EU-0006622-0000
number
Date of the authorisation 02/11/2014
Expiry date of the
02/11/2024
authorisation
1.4. Manufacturer(s) of the biocidal products
13/01/2021
SUMMARY OF PRODUCT 1
CHARACTERISTICSName of the manufacturer SALVECO S.A.S.
Address of the manufacturer Avenue Pierre Mendes-France F-88100 SAINT DIE DES VOSGES France
Location of manufacturing sites Avenue Pierre Mendes-France F-88100 SAINT DIE DES VOSGES France
Name of the manufacturer MULTIFILL BV BULKONTVANGST
Address of the manufacturer CONSTRUCTIEWEG 25A 3641 SB MIJDRECHT Netherlands
Location of manufacturing sites CONSTRUCTIEWEG 25A 3641 SB MIJDRECHT Netherlands
Name of the manufacturer Diversey Netherlands Production BV
Address of the manufacturer Rembrandtlaan 414 7545 ZW Enschede Netherlands
Location of manufacturing sites Rembrandtlaan 414 7545 ZW Enschede Netherlands
Name of the manufacturer Diversey UK Production Ltd
Address of the manufacturer Cotes Park Industrial Estate, Somercotes DE55 4PA Alfreton United Kingdom
Location of manufacturing sites Cotes Park Industrial Estate, Somercotes DE55 4PA Alfreton United Kingdom
Name of the manufacturer Diversey España Production S.L.U
Avenida Conde Duque 5, 7 y 9, Poligono Industrial La Postura 28343 Valdemoro (Madrid)
Address of the manufacturer Spain
Avenida Conde Duque 5, 7 y 9, Poligono Industrial La Postura 28343 Valdemoro (Madrid)
Location of manufacturing sites Spain
Name of the manufacturer Diversey Italy Production Srl
Address of the manufacturer Strada Statale 235 26010 Bagnolo Cremasco (CR) Italy
Location of manufacturing sites Strada Statale 235 26010 Bagnolo Cremasco (CR) Italy
13/01/2021
SUMMARY OF PRODUCT 2
CHARACTERISTICSName of the manufacturer Diversey Germany Production oHG
Address of the manufacturer Morschheimer Strasse 12 67292 Kirchheimbolanden Germany
Location of manufacturing sites Morschheimer Strasse 12 67292 Kirchheimbolanden Germany
Name of the manufacturer FOREVER PRODUCTS SA
Address of the manufacturer Rue de la Glacerie, 122 6180 COURCELLES Belgium
Location of manufacturing sites Rue de la Glacerie, 122 6180 COURCELLES Belgium
Name of the manufacturer VANDEPUTTE
Address of the manufacturer 120 Boulevard Industriel 7700 MOUSCRON Belgium
Location of manufacturing sites 120 Boulevard Industriel 7700 MOUSCRON Belgium
Name of the manufacturer Cheport spol s.r.o
Address of the manufacturer Lhotsko 93 76312 Vizovice Czech Republic
Location of manufacturing sites Lhotsko 93 76312 Vizovice Czech Republic
Name of the manufacturer EMMEGI DETERGENTS SRL
Address of the manufacturer Via Merlo Carlo Giuseppe, 3 20122 Milano Italy
Location of manufacturing sites Via marconi, 5 25030 Trenzano Italy
Name of the manufacturer GFL SA
Address of the manufacturer Via Sorengo 1 6900 Lugano Switzerland
Location of manufacturing sites Via del Benessere, 4 27010 Siziano Italy
13/01/2021
SUMMARY OF PRODUCT 3
CHARACTERISTICSName of the manufacturer BRUNEL - ALTAΪR Group
Address of the manufacturer ZI A - 132 Rue du Mont de Templemars 59139 NOYELLES LES SECLIN France
Location of manufacturing sites ZI A - 132 Rue du Mont de Templemars 59139 NOYELLES LES SECLIN France
Name of the manufacturer SUTTER INDUSTRIES SPA
Address of the manufacturer Localita Leigozze 1 15060 Borghetto Borbera AL Italy
Location of manufacturing sites Localita Leigozze 1 15060 Borghetto Borbera AL Italy
Name of the manufacturer Bio Armor
Address of the manufacturer Zone de la gare, 10/12 route du Pré Chevalier 22940 Plaintel France
Location of manufacturing sites Zone de la gare, 10/12 route du Pré Chevalier 22940 Plaintel France
1.5. Manufacturer(s) of the active substance(s)
Active substance 1421 - Lactic acid
Name of the manufacturer PURAC BIOQUIMICA
Address of the manufacturer Gran Vial 19-25 08160 Montmelo Spain
Location of manufacturing sites Gran Vial 19-25 08160 Montmelo Spain
13/01/2021
SUMMARY OF PRODUCT 4
CHARACTERISTICSActive substance 1421 - Lactic acid
Name of the manufacturer JUNGBUNGZLAUER S.A
Address of the manufacturer Z. I Portuaire BP 32 67390 Marckolsheim France
Location of manufacturing sites Z. I Portuaire BP 32 67390 Marckolsheim France
2. Product family composition and formulation
2.1. Qualitative and quantitative information on the composition of the family
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 0,32 - 1,76
2.2. Type(s) of formulation
AL - Any other liquid
Part II.- Second information level - meta SPC(s)
1. Meta SPC administrative information
1.1. Meta SPC identifier
META SPC n°1: Disinfectants for hands and all washable hard surfaces
1.2. Suffix to the authorisation number
1-1
13/01/2021
SUMMARY OF PRODUCT 5
CHARACTERISTICS1.3 Product type(s)
PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
PT04 - Food and feed area (Disinfectants)
PT01 - Human hygiene (Disinfectants)
2. Meta SPC composition
2.1.Qualitative and quantitative information on the composition of the meta SPC
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 1,75 - 1,76
2.2. Type(s) of formulation of the meta SPC
Formulation(s) AL - Any other liquid
3. Hazard and precautionary statements of the meta SPC
Hazard statements
Precautionary statements
4. Authorised use(s) of the meta SPC
4.1 Use description
Use 1 - PT2 - disinfectants for all washable hard surfaces
13/01/2021
SUMMARY OF PRODUCT 6
CHARACTERISTICSPT02 - Disinfectants and algaecides not intended for direct application to humans or
Product type animals (Disinfectants)
Where relevant, an exact Ready-to-use multi-purpose disinfectant with a bactericidal, yeasticidal efficacy and
virucidal activity against only lnfluenza virus A/H1N1 for hard surfaces in domestic,
description of the authorised institutional and industrial area.
use
Target organism(s) (including Scientific name: bacteria
Common name: Bacteria
development stage) Development stage:
Scientific name: Yeasts
Common name: Yeasts
Development stage:
Scientific name: Influenza virus A/H1N1
Common name: Viruses
Development stage:
Indoor
Field(s) of use
Outdoor
manual application: spraying, spreading, foam application, brush treatment, dip
Application method(s) treatment, immersion
Detailed description:
Apply the product by fully wetting all surface for 5 minutes. Rub or brush if necessary.
Application rate(s) and Application Rate: is to fully wet all the surface
Dilution (%): 0
frequencies Number and timing of application:
Apply once. Repeat the application if necessary.
Industrial
Category(ies) of users
Professional
General public (non-professional)
Pack sizes and packaging Bag /Sack, Plastic: HDPE, LDPE, PET, PE, PP , 0.01-5L
Bottle, Plastic: HDPE, LDPE, PET, PE, PP , 0.01-2L
material Can /Tin, Plastic: HDPE, LDPE, PET, PE, PP , 0.1-1L
Drum, Plastic: HDPE, LDPE, PET, PE, PP , 10-210L
IBC (intermediate bulk container), Plastic: HDPE, LDPE, PET, PE, PP , 1000L
Jerry can, Plastic: HDPE, LDPE, PET, PE, PP , 1-80L
Airspray, Plastic: HDPE, LDPE, PET, PE, PP , 0.15-1L
pouches, Plastic: HDPE, LDPE, PET, PE, PP , 0.05-5L
13/01/2021
SUMMARY OF PRODUCT 7
CHARACTERISTICSDescription (not mentioned on the
label):
All the used packaging are secure, closed, tight, strong and durable.
Packaging can be refilled only with product foreseen for that purpose.
4.1.1 Use-specific instructions for use
Apply the product by fully wetting all surface for 5 minutes. Rub or brush if necessary.
4.1.2 Use-specific risk mitigation measures
Section 5.2. (Risk mitigation measures )
4.1.3 Where specific to the use, the particulars of likely direct or indirect effects, first aid
instructions and emergency measures to protect the environment
Section 5.3. (Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment)
4.1.4 Where specific to the use, the instructions for safe disposal of the product and its
packaging
Section 5.4. (Instructions for safe disposal of the products and its packaging)
4.1.5 Where specific to the use, the conditions of storage and shelf-life of the product
under normal conditions of storage
13/01/2021
SUMMARY OF PRODUCT 8
CHARACTERISTICSSection 5.5. (Conditions of storage and shelf-life of the product under normal conditions of storage)
4.2 Use description
Use 2 - PT4 - disinfectants for all washable hard surfaces
PT04 - Food and feed area (Disinfectants)
Product type
Where relevant, an exact Ready-to-use multi-purpose disinfectant with a bactericidal, yeasticidal efficacy and
virucidal activity against only lnfluenza virus A/H1N1 for hard surfaces in domestic,
description of the authorised
institutional and industrial area.
use
Target organism(s) (including Scientific name: Bacteria
Common name: Bacteria
development stage) Development stage:
Scientific name: Yeast
Common name: Yeasts
Development stage:
Scientific name: Influenza virus A/H1N1
Common name: Viruses
Development stage:
Indoor
Field(s) of use
Outdoor
Manual application: spraying, spreading, foam application, brush treatment, dip
Application method(s) treatment, immersion
Detailed description:
Apply the product by fully wetting all surface for 5 minutes. Rub or brush if necessary.
Rinse thoroughly with clean water.
Application rate(s) and Application Rate: is to fully wet all the surface
Dilution (%): 0
frequencies Number and timing of application:
Apply once. Repeat the application if necessary.
13/01/2021
SUMMARY OF PRODUCT 9
CHARACTERISTICSIndustrial
Category(ies) of users
Professional
General public (non-professional)
Pack sizes and packaging Airspray, Plastic: HDPE, LDPE, PET, PE, PP , 0.15-1L
Bag /Sack, Plastic: HDPE, LDPE, PET, PE, PP , 0.01-5L
material Bottle, Plastic: HDPE, LDPE, PET, PE, PP , 0.01-2L
Can /Tin, Plastic: HDPE, LDPE, PET, PE, PP , 0.1-1L
Drum, Plastic: HDPE, LDPE, PET, PE, PP , 10-210L
IBC (intermediate bulk container), Plastic: HDPE, LDPE, PET, PE, PP , 1000L
Jerry can, Plastic: HDPE, LDPE, PET, PE, PP , 1-80L
pouches, Plastic: HDPE, LDPE, PET, PE, PP , 0.05-5L
Description (not mentioned on the label):
All the used packaging are secure, closed, tight, strong and durable.
Packaging can be refilled only with product foreseen for that purpose.
4.2.1 Use-specific instructions for use
Apply the product by fully wetting all surface for 5 minutes. Rub or brush f necessary. Rinse thoroughly with clean water.
4.2.2 Use-specific risk mitigation measures
Section 5.2. (Risk mitigation measures )
13/01/2021
SUMMARY OF PRODUCT 10
CHARACTERISTICS4.2.3 Where specific to the use, the particulars of likely direct or indirect effects, first aid
instructions and emergency measures to protect the environment
Section 5.3. (Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environement)
4.2.4 Where specific to the use, the instructions for safe disposal of the product and its
packaging
Section 5.4. (Instructions for safe disposal of the products and its packaging)
4.2.5 Where specific to the use, the conditions of storage and shelf-life of the product
under normal conditions of storage
Section 5.5. (Conditions of storage and shelf-life of the product under normal conditions of storage)
4.3 Use description
Use 3 - PT1 - disinfectants for hands
PT01 - Human hygiene (Disinfectants)
Product type
Where relevant, an exact Ready-to-use disinfectant for hands with a bactericidal, yeasticidal and virucidal efficacy
against only Influenza virus A/H1N1 in domestic, institutional and industrial area.
description of the authorised
use
Target organism(s) (including Scientific name: Bacteria
Common name: Bacteria
development stage) Development stage:
Scientific name: Yeasts
Common name: Yeasts
Development stage:
Scientific name: Influenza virus A/N1H1
Common name: Viruses
Development stage:
13/01/2021
SUMMARY OF PRODUCT 11
CHARACTERISTICSIndoor
Field(s) of use
Outdoor
manual application, spreading, foam application, brush treatment.
Application method(s) Detailed description:
Wet hand and wrists with water. Place 3 ml of product in the hallow of the hand. Rub
hands and wrists for at least 30 seconds. Rinse thoroughly with clean water.
Application rate(s) and Application Rate: 3 mL
Dilution (%): 0
frequencies Number and timing of application:
Apply once, repeat if renewed hand disinfection is needed.
Industrial
Category(ies) of users
Professional
General public (non-professional)
Pack sizes and packaging Bag /Sack, Plastic: HDPE, LDPE, PET, PE, PP , 0.01-5L
Bottle, Plastic: HDPE, LDPE, PET, PE, PP , 0.01-2L
material Can /Tin, Plastic: HDPE, LDPE, PET, PE, PP , 0.1-1L
Drum, Plastic: HDPE, LDPE, PET, PE, PP , 10-210L
Airspray, Plastic: HDPE, LDPE, PET, PE, PP , 0.15-1L
Jerry can, Plastic: HDPE, LDPE, PET, PE, PP , 1-80L
pouches, Plastic: HDPE, LDPE, PET, PE, PP , 0.05-5L
Description (not mentioned on the label):
All the used packaging are secure, closed, tight, strong and durable.
Packaging can be refilled only with product foreseen for that purpose.
4.3.1 Use-specific instructions for use
13/01/2021
SUMMARY OF PRODUCT 12
CHARACTERISTICS4.3.1 Use-specific instructions for use
Wet hand and wrists with water. Place 3 ml of product in the hallow of the hand. Rub hands and wrists for at least 30 seconds.
Rinse thoroughly with clean water.
4.3.2 Use-specific risk mitigation measures
Section 5.2. (Risk mitigation measures )
4.3.3 Where specific to the use, the particulars of likely direct or indirect effects, first aid
instructions and emergency measures to protect the environment
Section 5.3. (Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment)
4.3.4 Where specific to the use, the instructions for safe disposal of the product and its
packaging
Section 5.4. (Instructions for safe disposal of the products and its packaging)
4.3.5 Where specific to the use, the conditions of storage and shelf-life of the product
under normal conditions of storage
Section 5.5. (Conditions of storage and shelf-life of the product under normal conditions of storage)
5. General directions for use of the meta SPC
13/01/2021
SUMMARY OF PRODUCT 13
CHARACTERISTICS5.1. Instructions for use
PT1: Wet hands and wrists with water. Place 3mL of product in the hollow of the hand. Rub hands and wrists for at least 30
seconds.Rinse thoroughly with clean water.
PT2 - Apply the product by fully wetting all surface for 5 minutes. Rub or brush if necessary.
PT4: Apply the product by fully wetting all surface for 5 minutes. Rub or brush if necessary. Rinse thoroughly with clean water
5.2. Risk mitigation measures
Additional statements:
For general users: If medical advice is needed, have product container or label at hand. Keep out of reach of children.
For professional users only: Safety data sheet available on request.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency
measures to protect the environment
No direct or indirect adverse effects are known.
First aid instructions:
If swallowed: immediately call a POISON CENTER or doctor/physician.
In case of contact with eyes, remove contact lenses if present and rinse the eye slowly and gently with clean water.
5.4. Instructions for safe disposal of the product and its packaging
Dispose of content/container according to national regulation.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
13/01/2021
SUMMARY OF PRODUCT 14
CHARACTERISTICSShelf-life: Products can be stored at room temperature up to 24 months.
Conditions: Avoid cold, frost and heat.
6. Other information
7. Third information level: individual products in the meta SPC
7.1 Trade name(s), authorisation number and specific composition of each individual
product
Trade name(s) SALVESAFE A28M Market area: EU
SalveSafe Soap X10 Market area: EU
SURE Antibac Hand Wash Market area: EU
Authorisation number
EU-0006622-0008 1-1
(R4BP 3 asset reference number - National
Authorisation)
13/01/2021
SUMMARY OF PRODUCT 15
CHARACTERISTICSCommon name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 1,75
Trade name(s) SALVESAFE A29M Market area: EU
Authorisation number
EU-0006622-0009 1-1
(R4BP 3 asset reference number - National
Authorisation)
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 1,75
1. Meta SPC administrative information
1.1. Meta SPC identifier
META SPC n°2 : Disinfectants for all washable hard surfaces (with virudical claim)
1.2. Suffix to the authorisation number
1-2
13/01/2021
SUMMARY OF PRODUCT 16
CHARACTERISTICS1.3 Product type(s)
PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
PT04 - Food and feed area (Disinfectants)
2. Meta SPC composition
2.1.Qualitative and quantitative information on the composition of the meta SPC
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 0,42 - 1,76
2.2. Type(s) of formulation of the meta SPC
Formulation(s) AL - Any other liquid
3. Hazard and precautionary statements of the meta SPC
Hazard statements
Precautionary statements
4. Authorised use(s) of the meta SPC
4.1 Use description
Use 1 - PT2 - disinfectants for all washable hard surfaces
PT02 - Disinfectants and algaecides not intended for direct application to humans or
Product type animals (Disinfectants)
13/01/2021
SUMMARY OF PRODUCT 17
CHARACTERISTICSWhere relevant, an exact Ready-to-use multi-purpose disinfectant with a bactericidal, yeasticidal efficacy and
virucidal activity against only lnfluenza virus A/H1N1 for hard surfaces in domestic,
description of the authorised institutional and industrial area.
use
Target organism(s) (including Scientific name: Bacteria
Common name: Bacteria
development stage) Development stage:
Scientific name: Yeasts
Common name: Yeasts
Development stage:
Scientific name: Influenza virus A/H1N1
Common name: Viruses
Development stage:
Indoor
Field(s) of use
Outdoor
Manual application: spraying, spreading, foam application, brush treatment, dip
Application method(s) treament, immersion
Detailed description:
Apply the product by fully wetting all surface for 5 minutes. Rub or brush if necessary.
Application rate(s) and Application Rate: is to fully wet all the surface
Dilution (%): 0
frequencies Number and timing of application:
Apply once. Repeat the application if necessary.
Industrial
Category(ies) of users
Professional
General public (non-professional)
Pack sizes and packaging Bag /Sack, Plastic: HDPE, LDPE, PET, PE, PP , 0.01-5L
Bottle, Plastic: HDPE, LDPE, PET, PE, PP , 0.01-2L
material Can /Tin, Plastic: HDPE, LDPE, PET, PE, PP , 0.1-1L
Drum, Plastic: HDPE, LDPE, PET, PE, PP , 10-210L
IBC (intermediate bulk container), Plastic: HDPE, LDPE, PET, PE, PP , 1000L
Jerry can, Plastic: HDPE, LDPE, PET, PE, PP , 1-80L
Airspray, Plastic: HDPE, LDPE, PET, PE, PP , 0.15-1L
pouches, Plastic: HDPE, LDPE, PET, PE, PP , 0.05-5L
Description (not mentioned on the
label):
All the used packaging are secure, closed, tight, strong and durable.
Packaging can be refilled only with product foreseen for that purpose.
13/01/2021
SUMMARY OF PRODUCT 18
CHARACTERISTICS4.1.1 Use-specific instructions for use
Apply the product by fully wetting all surface for 5 minutes. Rub or brush if necessary.
4.1.2 Use-specific risk mitigation measures
Section 5.2. (Risk mitigation measures )
4.1.3 Where specific to the use, the particulars of likely direct or indirect effects, first aid
instructions and emergency measures to protect the environment
Section 5.3. (Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment)
4.1.4 Where specific to the use, the instructions for safe disposal of the product and its
packaging
Section 5.4. (Instructions for safe disposal of the products and its packaging)
4.1.5 Where specific to the use, the conditions of storage and shelf-life of the product
under normal conditions of storage
Section 5.5. (Conditions of storage and shelf-life of the product under normal conditions of storage)
4.2 Use description
Use 2 - PT4 - disinfectants for all washable hard surfaces
PT04 - Food and feed area (Disinfectants)
Product type
Where relevant, an exact Ready-to-use multi-purpose disinfectant with a bactericidal, yeasticidal efficacy and
virucidal activity against only lnfluenza virus A/H1N1 for hard surfaces in domestic,
description of the authorised institutional and industrial area.
use
Target organism(s) (including Scientific name: Bacteria
Common name: Bacteria
development stage) Development stage:
Scientific name: Yeasts
Common name: Yeasts
Development stage:
13/01/2021
SUMMARY OF PRODUCT 19
CHARACTERISTICSScientific name: Influenza virus A/H1N1
Common name: Viruses
Development stage:
Indoor
Field(s) of use
Outdoor
Manual application: spraying, spreading, foam application, brush treatment, dip
Application method(s) treatment, immersion.
Detailed description:
Apply the product by fully wetting all surface for 5 minutes. Rub or brush if necessary.
Rinse thoroughly with clean water.
Application rate(s) and Application Rate: is to fully wet all the surface
Dilution (%): 0
frequencies Number and timing of application:
Apply once. Repeat the application if necessary.
Industrial
Category(ies) of users
Professional
General public (non-professional)
Pack sizes and packaging Bag /Sack, Plastic: HDPE, LDPE, PET, PE, PP , 0.01-5L
Bottle, Plastic: HDPE, LDPE, PET, PE, PP , 0.01-2L
material Can /Tin, Plastic: HDPE, LDPE, PET, PE, PP , 0.1-1L
Drum, Plastic: HDPE, LDPE, PET, PE, PP , 10-210L
IBC (intermediate bulk container), Plastic: HDPE, LDPE, PET, PE, PP , 1000L
Jerry can, Plastic: HDPE, LDPE, PET, PE, PP , 1-80L
Airspray, Plastic: HDPE, LDPE, PET, PE, PP , 0.15-1L
pouches, Plastic: HDPE, LDPE, PET, PE, PP , 0.05-5L
Description (not mentioned on the
label):
All the used packaging are secure, closed, tight, strong and durable.
Packaging can be refilled only with product foreseen for that purpose.
4.2.1 Use-specific instructions for use
13/01/2021
SUMMARY OF PRODUCT 20
CHARACTERISTICSApply the product by fully wetting all surface for 5 minutes. Rub or brush if necessary. Rinse thoroughly with clean water.
4.2.2 Use-specific risk mitigation measures
Section 5.2. (Risk mitigation measures )
4.2.3 Where specific to the use, the particulars of likely direct or indirect effects, first aid
instructions and emergency measures to protect the environment
Section 5.3. (Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the
environement)
4.2.4 Where specific to the use, the instructions for safe disposal of the product and its
packaging
Section 5.4. (Instructions for safe disposal of the products and its packaging)
4.2.5 Where specific to the use, the conditions of storage and shelf-life of the product
under normal conditions of storage
Section 5.5. (Conditions of storage and shelf-life of the product under normal conditions of storage)
5. General directions for use of the meta SPC
5.1. Instructions for use
PT2 - Apply the product by fully wetting all surface for 5 minutes. Rub or brush if necessary.
PT4: Apply the product by fully wetting all surface for 5 minutes. Rub or brush if necessary. Rinse thoroughly with clean water
5.2. Risk mitigation measures
13/01/2021
SUMMARY OF PRODUCT 21
CHARACTERISTICSAdditional statements:
For general users: If medical advice is needed, have product container or label at hand. Keep out of reach of children.
For professional users only: Safety data sheet available on request.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency
measures to protect the environment
No direct or indirect adverse effects are known.
First aid instructions:
If swallowed: immediately call a POISON CENTER or doctor/physician.
In case of contact with eyes, remove contact lenses if present and rinse the eye slowly and gently with clean water.
5.4. Instructions for safe disposal of the product and its packaging
Dispose of content/container according to national regulation.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Shelf-life: Products can be stored at room temperature up to 24 months.
Conditions: Avoid cold, frost and heat.
6. Other information
7. Third information level: individual products in the meta SPC
7.1 Trade name(s), authorisation number and specific composition of each individual
product
13/01/2021
SUMMARY OF PRODUCT 22
CHARACTERISTICSTrade name(s) SALVESAFE A23M Market area: EU
Authorisation number
EU-0006622-0001 1-2
(R4BP 3 asset reference number - National
Authorisation)
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 1,32
Trade name(s) SALVESAFE A25M Market area: EU
Authorisation number
EU-0006622-0005 1-2
(R4BP 3 asset reference number - National
Authorisation)
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 0,42
13/01/2021
SUMMARY OF PRODUCT 23
CHARACTERISTICSTrade name(s) SALVESAFE A30M Market area: EU
SalveSafe 56 Market area: EU
SURE Cleaner Disinfectant Spray Market area: EU
Authorisation number
EU-0006622-0011 1-2
(R4BP 3 asset reference number - National
Authorisation)
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 0,42
Trade name(s) SALVESAFE A31M Market area: EU
SalveSafe 56M Market area: EU
GERM SPRAY CARE Perfect Disinfection Market area: EU
LACTIC Market area: EU
DISINFETTANTE ANTIBATTERICO
Market area: EU
MULTISUPERFICIE
Authorisation number
13/01/2021
SUMMARY OF PRODUCT 24
CHARACTERISTICSEU-0006622-0010 1-2
(R4BP 3 asset reference number - National
Authorisation)
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 0,42
Trade name(s) SALVESAFE A32M Market area: EU
SalveSafe X10 Market area: EU
GERM TROL CARE Perfect Disinfection Market area: EU
Authorisation number
EU-0006622-0012 1-2
(R4BP 3 asset reference number - National
Authorisation)
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 1,75
13/01/2021
SUMMARY OF PRODUCT 25
CHARACTERISTICSTrade name(s) SALVESAFE A34M Market area: EU
SalveSafe 56 MV Market area: EU
Désinfectant multi-surfaces Market area: EU
Nettoyant désinfectant ACTIV+ Market area: EU
Nettoyant désinfectant multi-surfaces –
Market area: EU
Antibacterial surface spray
BÉABA – Nettoyant désinfectant
Market area: EU
multisurfaces
BÉABA - Multisurface disinfectant cleaner Market area: EU
BÉABA - Limpiador desinfectante multiusos Market area: EU
BÉABA - Allzweck Desinfektionsreiniger Market area: EU
BÉABA - Desinfecterende reiniger voor
Market area: EU
harde oppervlakken
BÉABA - Dezynfekujący środek czyszczący
Market area: EU
do wielu powierzchni
BÉABA - Višenamjensko sredstvo za
Market area: EU
dezinfekciju
BÉABA - Detergente disinfettante
Market area: EU
multisuperficie
Authorisation number
EU-0006622-0013 1-2
(R4BP 3 asset reference number - National
Authorisation)
13/01/2021
SUMMARY OF PRODUCT 26
CHARACTERISTICSCommon name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 0,42
Trade name(s) LACTO DES Market area: EU
SALVESAFE A43M Market area: EU
Univert - Spray nettoyant désinfectant Market area: EU
Authorisation number
EU-0006622-0018 1-2
(R4BP 3 asset reference number - National
Authorisation)
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 0,42
Trade name(s) SALVESAFE A46M Market area: EU
Authorisation number
13/01/2021
SUMMARY OF PRODUCT 27
CHARACTERISTICSEU-0006622-0020 1-2
(R4BP 3 asset reference number - National
Authorisation)
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 0,42
Trade name(s) SALVESAFE A47M Market area: EU
Starwax - Nettoyant désinfectant Multi-
Market area: EU
surfaces
Starwax - Dégraissant désinfectant Cuisine Market area: EU
Starwax - Nettoyant désinfectant Sanitaires Market area: EU
Starwax - Desinfecterende reiniger Multi-
Market area: EU
oppervlakken
Starwax - AllzweckDesinfektionsreiniger Market area: EU
Starwax - Detergente disinfettante Multi-
Market area: EU
superfici
Starwax - Mycie & Dezynfekcja PŁYN
Market area: EU
UNIWERSALNY
Starwax - Odtłuczanie & Dezynfekcja
Market area: EU
KUCHNIA
13/01/2021
SUMMARY OF PRODUCT 28
CHARACTERISTICSStarwax - Odwapnianie & Dezynfekcja
Market area: EU
ŁAZIENKA
Starwax - Limpiador desinfectante
Market area: EU
Multisuperficies
Starwax - Limpeza desinfetante
Market area: EU
Multisuperfícies
Authorisation number
EU-0006622-0021 1-2
(R4BP 3 asset reference number - National
Authorisation)
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 0,42
1. Meta SPC administrative information
1.1. Meta SPC identifier
META SPC n°3: Disinfectants for all washable hard surfaces (without virudical claim)
1.2. Suffix to the authorisation number
1-3
1.3 Product type(s)
PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
PT04 - Food and feed area (Disinfectants)
13/01/2021
SUMMARY OF PRODUCT 29
CHARACTERISTICS2. Meta SPC composition
2.1.Qualitative and quantitative information on the composition of the meta SPC
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 0,32 - 1,76
2.2. Type(s) of formulation of the meta SPC
Formulation(s) AL - Any other liquid
3. Hazard and precautionary statements of the meta SPC
Hazard statements
Precautionary statements
4. Authorised use(s) of the meta SPC
4.1 Use description
Use 1 - PT2 - disinfectants for all washable hard surfaces
PT02 - Disinfectants and algaecides not intended for direct application to humans or
Product type animals (Disinfectants)
Where relevant, an exact Ready-to-use multi-purpose disinfectant with a bactericidal and yeasticidal efficacy for
description of the authorised hard surfaces in domestic, institutional and industrial area.
use
Scientific name: Bacteria
13/01/2021
SUMMARY OF PRODUCT 30
CHARACTERISTICSCommon name: Bacteria
Target organism(s) (including Development stage:
development stage)
Scientific name: Yeasts
Common name: Yeasts
Development stage:
Indoor
Field(s) of use
Outdoor
Manual application: spraying, spreading, foam application, brush treatment, dip
Application method(s) treatment, immersion
Detailed description:
Apply the product by fully wetting all surface for 5 minutes. Rub or brush if necessary.
Application rate(s) and Application Rate: is to fully wet all the surface
Dilution (%): 0
frequencies Number and timing of application:
Apply once. Repeat the application if necessary.
Industrial
Category(ies) of users
Professional
General public (non-professional)
Pack sizes and packaging Bag /Sack, Plastic: HDPE, LDPE, PET, PE, PP , 0.01-5L
Bottle, Plastic: HDPE, LDPE, PET, PE, PP , 0.01-2L
material Can /Tin, Plastic: HDPE, LDPE, PET, PE, PP , 0.1-1L
Drum, Plastic: HDPE, LDPE, PET, PE, PP , 10-210L
IBC (intermediate bulk container), Plastic: HDPE, LDPE, PET, PE, PP , 1000L
Jerry can, Plastic: HDPE, LDPE, PET, PE, PP , 1-80L
Airspray, Plastic: HDPE, LDPE, PET, PE, PP , 0.15-1L
pouches, Plastic: HDPE, LDPE, PET, PE, PP , 0.05-5L
Description (not mentioned on the
label):
All the used packaging are secure, closed, tight, strong and durable.
Packaging can be refilled only with product foreseen for that purpose.
4.1.1 Use-specific instructions for use
13/01/2021
SUMMARY OF PRODUCT 31
CHARACTERISTICSApply the product by fully wetting all surface for 5 minutes. Rub or brush if necessary.
4.1.2 Use-specific risk mitigation measures
Section 5.2. (Risk mitigation measures )
4.1.3 Where specific to the use, the particulars of likely direct or indirect effects, first aid
instructions and emergency measures to protect the environment
Section 5.3. (Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment)
4.1.4 Where specific to the use, the instructions for safe disposal of the product and its
packaging
Section 5.4. (Instructions for safe disposal of the products and its packaging)
4.1.5 Where specific to the use, the conditions of storage and shelf-life of the product
under normal conditions of storage
Section 5.5. (Conditions of storage and shelf-life of the product under normal conditions of storage)
4.2 Use description
Use 2 - PT4 - disinfectants for all washable hard surfaces
PT04 - Food and feed area (Disinfectants)
Product type
Where relevant, an exact Ready-to-use multi-purpose disinfectant with a bactericidal and yeasticidal efficacy for
description of the authorised hard surfaces in domestic, institutional and industrial area.
use
Target organism(s) (including Scientific name: Bacteria
Common name: Bacteria
development stage) Development stage:
Scientific name: Yeasts
Common name: Yeasts
Development stage:
Field(s) of use
13/01/2021
SUMMARY OF PRODUCT 32
CHARACTERISTICSIndoor
Outdoor
Manual application: spraying, spreading, foam application, brush treatment, dip
Application method(s) treatment, immersion
Detailed description:
Apply the product by fully wetting all surface for 5 minutes. Rub or brush if necessary.
Rinse thoroughly with clean water.
Application rate(s) and Application Rate: is to fully wet all the surface
Dilution (%): 0
frequencies Number and timing of application:
Apply once. Repeat the application if necessary.
Industrial
Category(ies) of users
Professional
General public (non-professional)
Pack sizes and packaging Bag /Sack, Plastic: HDPE, LDPE, PET, PE, PP , 0.01-5L
Bottle, Plastic: HDPE, LDPE, PET, PE, PP , 0.01-2L
material Can /Tin, Plastic: HDPE, LDPE, PET, PE, PP , 0.1-1L
Drum, Plastic: HDPE, LDPE, PET, PE, PP , 10-210L
IBC (intermediate bulk container), Plastic: HDPE, LDPE, PET, PE, PP , 1000L
Jerry can, Plastic: HDPE, LDPE, PET, PE, PP , 1-80L
Airspray, Plastic: HDPE, LDPE, PET, PE, PP , 0.15-1L
pouches, Plastic: HDPE, LDPE, PET, PE, PP , 0.05-5L
Description (not mentioned on the
label):
All the used packaging are secure, closed, tight, strong and durable.
Packaging can be refilled only with product foreseen for that purpose.
4.2.1 Use-specific instructions for use
Apply the product by fully wetting all surface for 5 minutes. Rub or brush if necessary. Rinse thoroughly with clean water.
13/01/2021
SUMMARY OF PRODUCT 33
CHARACTERISTICS4.2.2 Use-specific risk mitigation measures
Section 5.2. (Risk mitigation measures )
4.2.3 Where specific to the use, the particulars of likely direct or indirect effects, first aid
instructions and emergency measures to protect the environment
Section 5.3. (Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the
environement)
4.2.4 Where specific to the use, the instructions for safe disposal of the product and its
packaging
Section 5.4. (Instructions for safe disposal of the products and its packaging)
4.2.5 Where specific to the use, the conditions of storage and shelf-life of the product
under normal conditions of storage
Section 5.5. (Conditions of storage and shelf-life of the product under normal conditions of storage)
5. General directions for use of the meta SPC
5.1. Instructions for use
PT2 - Apply the product by fully wetting all surface for 5 minutes. Rub or brush if necessary.
PT4: Apply the product by fully wetting all surface for 5 minutes. Rub or brush if necessary. Rinse thoroughly with clean water
5.2. Risk mitigation measures
Additional statements:
For general users: If medical advice is needed, have product container or label at hand. Keep out of reach of children.
For professional users only: Safety data sheet available on request
13/01/2021
SUMMARY OF PRODUCT 34
CHARACTERISTICS5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency
measures to protect the environment
No direct or indirect adverse effects are known.
First aid instructions:
If swallowed: immediately call a POISON CENTER or doctor/physician.
In case of contact with eyes, remove contact lenses if present and rinse the eye slowly and gently with clean water.
5.4. Instructions for safe disposal of the product and its packaging
Dispose of content/container according to national regulation.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Shelf-life: Products can be stored at room temperature up to 24 months.
Conditions: Avoid cold, frost and heat.
6. Other information
7. Third information level: individual products in the meta SPC
7.1 Trade name(s), authorisation number and specific composition of each individual
product
Trade name(s) SALVESAFE A21M Market area: EU
Authorisation number
13/01/2021
SUMMARY OF PRODUCT 35
CHARACTERISTICSEU-0006622-0007 1-3
(R4BP 3 asset reference number - National
Authorisation)
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 0,32
Trade name(s) Tech’Lab by Techline – Détartrant
Market area: EU
Désinfectant Sanitaires
SALVESAFE A22M Market area: EU
Authorisation number
EU-0006622-0019 1-3
(R4BP 3 asset reference number - National
Authorisation)
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 1,76
13/01/2021
SUMMARY OF PRODUCT 36
CHARACTERISTICS1. Meta SPC administrative information
1.1. Meta SPC identifier
META SPC n°4 : Disinfectants for hands
1.2. Suffix to the authorisation number
1-4
1.3 Product type(s)
PT01 - Human hygiene (Disinfectants)
2. Meta SPC composition
2.1.Qualitative and quantitative information on the composition of the meta SPC
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 1,75 - 1,76
2.2. Type(s) of formulation of the meta SPC
Formulation(s) AL - Any other liquid
3. Hazard and precautionary statements of the meta SPC
Hazard statements
Precautionary statements
13/01/2021
SUMMARY OF PRODUCT 37
CHARACTERISTICS4. Authorised use(s) of the meta SPC
4.1 Use description
Use 1 - PT1 - disinfectants for hands
PT01 - Human hygiene (Disinfectants)
Product type
Where relevant, an exact Ready-to-use disinfectant for hands with a bactericidal, yeasticidal and virucidal efficacy
description of the authorised against only Influenza virus A/H1N1 in domestic, institutional and industrial area.
use
Target organism(s) (including Scientific name: Bacteria
Common name: Bacteria
development stage) Development stage:
Scientific name: Yeasts
Common name: Yeasts
Development stage:
Scientific name: Influenza virus A/N1H1
Common name: Viruses
Development stage:
Indoor
Field(s) of use
Outdoor
manual application, spreading, foam application, brush treatment.
Application method(s) Detailed description:
Wet hand and wrists with water. Place 3 ml of product in the hallow of the hand. Rub
hands and wrists for at least 30 seconds. Rinse thoroughly with clean water.
Application rate(s) and Application Rate: 3 mL
Dilution (%): 0
frequencies Number and timing of application:
Apply once, repeat if renewed hand disinfection is needed.
Industrial
Category(ies) of users
Professional
General public (non-professional)
Pack sizes and packaging Bag /Sack, Plastic: HDPE, LDPE, PET, PE, PP , 0.01-5L
Bottle, Plastic: HDPE, LDPE, PET, PE, PP , 0.01-2L
material Can /Tin, Plastic: HDPE, LDPE, PET, PE, PP , 0.1-1L
Drum, Plastic: HDPE, LDPE, PET, PE, PP , 10-210L
Airspray, Plastic: HDPE, LDPE, PET, PE, PP , 0.15-1L
Jerry can, Plastic: HDPE, LDPE, PET, PE, PP , 1-80L
pouches, Plastic: HDPE, LDPE, PET, PE, PP , 0.05-5L
13/01/2021
SUMMARY OF PRODUCT 38
CHARACTERISTICSDescription (not mentioned on the label):
All the used packaging are secure, closed, tight, strong and durable.
Packaging can be refilled only with product foreseen for that purpose.
4.1.1 Use-specific instructions for use
Wet hand and wrists with water. Place 3 ml of product in the hallow of the hand. Rub hands and wrists for at least 30 seconds.
Rinse thoroughly with clean water.
4.1.2 Use-specific risk mitigation measures
Section 5.2. (Risk mitigation measures )
4.1.3 Where specific to the use, the particulars of likely direct or indirect effects, first aid
instructions and emergency measures to protect the environment
Section 5.3. (Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment)
4.1.4 Where specific to the use, the instructions for safe disposal of the product and its
packaging
Section 5.4. (Instructions for safe disposal of the products and its packaging)
4.1.5 Where specific to the use, the conditions of storage and shelf-life of the product
under normal conditions of storage
Section 5.5. (Conditions of storage and shelf-life of the product under normal conditions of storage)
5. General directions for use of the meta SPC
5.1. Instructions for use
13/01/2021
SUMMARY OF PRODUCT 39
CHARACTERISTICSPT1: Wet hands and wrists with water. Place 3mL of product in the hollow of the hand. Rub hands and wrists for at least 30
seconds.Rinse thoroughly with clean water.
5.2. Risk mitigation measures
Additional statements:
For general users: If medical advice is needed, have product container or label at hand. Keep out of reach of children.
For professional users only: Safety data sheet available on request.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency
measures to protect the environment
No direct or indirect adverse effects are known.
First aid instructions:
If swallowed: immediately call a POISON CENTER or doctor/physician.
In case of contact with eyes, remove contact lenses if present and rinse the eye slowly and gently with clean water.
5.4. Instructions for safe disposal of the product and its packaging
Dispose of content/container according to national regulation.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Shelf-life: Products can be stored at room temperature up to 24 months.
Conditions: Avoid cold, frost and heat.
6. Other information
13/01/2021
SUMMARY OF PRODUCT 40
CHARACTERISTICS7. Third information level: individual products in the meta SPC
7.1 Trade name(s), authorisation number and specific composition of each individual
product
Trade name(s) SALVESAFE A33M Market area: EU
ATOUT VERT CREMLAV ANTISEPTIQUE Market area: EU
SalveSafe Soap X10 E Market area: EU
Authorisation number
EU-0006622-0015 1-4
(R4BP 3 asset reference number - National
Authorisation)
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 1,75
Trade name(s) SALVESAFE A35M Market area: EU
SURE Antibac Hand Wash Free Market area: EU
SalveSafe Soap X10 SP Market area: EU
RIVADOUCE® SAVON DESINFECTANT Market area: EU
13/01/2021
SUMMARY OF PRODUCT 41
CHARACTERISTICSAuthorisation number
EU-0006622-0014 1-4
(R4BP 3 asset reference number - National
Authorisation)
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 1,75
Trade name(s) SALVESAFE A36M Market area: EU
SalveSafe Soap 10F Market area: EU
SURE Antibac Foam Hand Wash Free Market area: EU
Authorisation number
EU-0006622-0016 1-4
(R4BP 3 asset reference number - National
Authorisation)
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 1,75
13/01/2021
SUMMARY OF PRODUCT 42
CHARACTERISTICSTrade name(s) SALVESAFE A44M Market area: EU
SalveSafe Soap X MG Market area: EU
HYGIOS Savon mains désinfectant Market area: EU
Authorisation number
EU-0006622-0017 1-4
(R4BP 3 asset reference number - National
Authorisation)
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 1,75
1. Meta SPC administrative information
1.1. Meta SPC identifier
META SPC n°5: Algaecides
1.2. Suffix to the authorisation number
1-5
13/01/2021
SUMMARY OF PRODUCT 43
CHARACTERISTICS1.3 Product type(s)
PT02 - Disinfectants and algaecides not intended for direct application to humans or animals (Disinfectants)
2. Meta SPC composition
2.1.Qualitative and quantitative information on the composition of the meta SPC
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 1,69 - 1,76
2.2. Type(s) of formulation of the meta SPC
Formulation(s) AL - Any other liquid
3. Hazard and precautionary statements of the meta SPC
Hazard statements
Precautionary statements
4. Authorised use(s) of the meta SPC
4.1 Use description
Use 1 - PT2 - Algaecides
PT02 - Disinfectants and algaecides not intended for direct application to humans or
Product type animals (Disinfectants)
Where relevant, an exact Ready-to-use solution with algaecide efficacy used as lichen and algae remover from hard
description of the authorised surfaces: roofs, walls, concrete, stone, tiles, sport courts, playgrounds, greenhouses.
13/01/2021
SUMMARY OF PRODUCT 44
CHARACTERISTICSuse
Target organism(s) (including Scientific name: Algae
Common name: Algae
development stage) Development stage:
Scientific name: Lichens
Common name: Lichens
Development stage:
Outdoor
Field(s) of use
Manual application: spraying, spreading, foam application, brush treatment, dip
Application method(s) treatment, immersion.
Detailed description:
Use in the dry weather. Apply the product by wetting all surface. Allow the product
functioning until complete drying. Do not rinse. Brush if necessary 2 days later to
remove debris.
Application rate(s) and Application Rate: is to fully wet all surface
Dilution (%): 0
frequencies Number and timing of application:
Apply once, and then monitor the situation regularly. Repeat the application if necessary
Industrial
Category(ies) of users
Professional
General public (non-professional)
Pack sizes and packaging Airspray, Plastic: HDPE, LDPE, PET, PE, PP , 0.15-1L
Bag /Sack, Plastic: HDPE, LDPE, PET, PE, PP , 0.01-5L
material Bottle, Plastic: HDPE, LDPE, PET, PE, PP , 0.01-2L
Can /Tin, Plastic: HDPE, LDPE, PET, PE, PP , 0.1-1L
Drum, Plastic: HDPE, LDPE, PET, PE, PP , 10-210L
IBC (intermediate bulk container), Plastic: HDPE, LDPE, PET, PE, PP , 1000L
Jerry can, Plastic: HDPE, LDPE, PET, PE, PP , 1-80L
Description (not mentioned on the label):
All the used packaging are secure, closed, tight, strong and durable.
Packaging can be refilled only with product foreseen for that purpose.
13/01/2021
SUMMARY OF PRODUCT 45
CHARACTERISTICS4.1.1 Use-specific instructions for use
Use in the dry weather. Apply the product by wetting all surface. Allow the product functioning until complete drying. Do not rinse.
Brush if necessary 2 days later to remove debris.
4.1.2 Use-specific risk mitigation measures
Section 5.2. (Risk mitigation measures )
4.1.3 Where specific to the use, the particulars of likely direct or indirect effects, first aid
instructions and emergency measures to protect the environment
Section 5.3. (Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment)
4.1.4 Where specific to the use, the instructions for safe disposal of the product and its
packaging
Section 5.4. (Instructions for safe disposal of the products and its packaging)
4.1.5 Where specific to the use, the conditions of storage and shelf-life of the product
under normal conditions of storage
Section 5.5. (Conditions of storage and shelf-life of the product under normal conditions of storage)
5. General directions for use of the meta SPC
5.1. Instructions for use
PT2 (Algaecides) : Use in the dry weather. Apply theproduct by wetting all surface. Allow the product functioning until
completedrying. Do not rinse. Brush if necessary 2 days later to remove debris.
5.2. Risk mitigation measures
13/01/2021
SUMMARY OF PRODUCT 46
CHARACTERISTICS5.2. Risk mitigation measures
Additional statements:
For general users: If medical advice is needed, have product container or label at hand. Keep out of reach of children.
For professional users only: Safety data sheet available on request.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency
measures to protect the environment
No direct or indirect adverse effects are known.
First aid instructions:
If swallowed: immediately call a POISON CENTER or doctor/physician.
In case of contact with eyes, remove contact lenses if present and rinse the eye slowly and gently with clean water.
5.4. Instructions for safe disposal of the product and its packaging
Dispose of content/container according to national regulation.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Shelf-life: Products can be stored at room temperature up to 24 months.
Conditions: Avoid cold, frost and heat.
6. Other information
7. Third information level: individual products in the meta SPC
7.1 Trade name(s), authorisation number and specific composition of each individual
product
13/01/2021
SUMMARY OF PRODUCT 47
CHARACTERISTICSTrade name(s) SALVESAFE A27M Market area: EU
STOP GREEN NEW Market area: EU
Authorisation number
EU-0006622-0002 1-5
(R4BP 3 asset reference number - National
Authorisation)
Common name IUPAC name Function CAS number EC number Content (%)
Lactic acid Active Substance 200-018-0 1,69
13/01/2021
SUMMARY OF PRODUCT 48
CHARACTERISTICSYou can also read
