Undergraduate Research and Design Symposium - Oral Presentations April 27, 2018
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Undergraduate Research and Design Symposium – Oral Presentations
April 27, 2018
Welcome to the College’s Undergraduate Research and Design Symposium (UGRADS) Oral Presentations.
We have reached the 25th year of oral presentations showcasing our Civil, Electrical, Environmental,
Mechanical Engineering and Computer Science capstone projects. Additional poster presentations
featuring the varied intellectual accomplishments that result from undergraduate research throughout
the college are in the Skydome in two sessions from 9:00 – 11:00am & 2:00 - 4:00pm.
Presentations are arranged into three morning sessions (#1: 8:00 – 9:10am, #2: 9:20 – 10:30am, and #3:
10:40-11:25am) and two afternoon sessions (#4: 1:10 - 2:20pm & #5: 2:30 – 3:40pm), by discipline as
shown below. All presentations will be in the du Bois Center meeting rooms. Lunch and the Keynote
address will be in the du Bois Ballroom. Engineering and Computer Science project websites are available
for viewing for this year and as far back as 1996 by visiting http://www.cefns.nau.edu/capstone/d4p/ .
Sponsors this year include W.L. Gore, Dan & Cindy Klingberg, Begovac Experiment Fund, NASA, Freeport-
McMoRan, Dr. Henry Hooper, McCarthy Building, Raytheon, Loven Contracting, and Phi Kappa Phi.
Many thanks to these generous donors!
Luncheon & Keynote Address – 11:30am-1:00pm, du Bois Ballroom
Please join us for lunch if you are a poster or oral presenter, family member, judge, sponsor, alumni,
mentor, faculty, staff or advisory council member.
“Propelling a career while having work-life balance”
Peggy Nelson, CFO IHF LCC, Executive Aerospace ConsultantDu Bois Center Facility map – 1st Floor
NOTE: Ballroom A is on the 2nd floorMORNING SESSIONS (8:00AM – 11:25AM)
Aspen A Room – Mechanical Engineering Oral Presentations
Session 1 – Dr. Hesam Moghaddam, Moderator
8:00-8:20am – “Rube Goldberg Machine Competition” (client: Dr. David Trevas, sponsored by W.L.
Gore) by R. DeHeer, M. Lenschow, A. Alenezi, F. Alotaibi, K. Kraemer
8:25-8:45am – “Hydraulics Demonstrator” (client: Dr. David Trevas) by C. Skilsky, F. Alenezi, M. Aljebly,
S. Alenezi
8:50-9:10am – “Thermodynamics Demo Unit” (client: David Willy) by I. Keene, J. Tilden, A. Wedell, A.
Robinson
Session 2 – David Willy, Moderator
9:20-9:40am – “MWI Labs NRL Loss Arch Redesign” (client: MWI Lab) by J. Head, D. Matthews, M.
Parker, and Z. McCormick
9:45-10:05am – "Temperature Programed Desorption Secondary Ion Mass Spectrometer” (client:
Sandia National Laboratory) by N. Cain, C. Evans, K. Larson, D. Stone
10:10-10:30am – “Catheter Balloon Inspection Apparatus” (client: POBA) by S. Pooler, K. White, R.
Stevenson, A. Peters
Session 3 – Combined Double Presentation, David Willy, Moderator
10:40-11:25am – “SAE Mini Baja Competition” (client: David Willy, sponsored by W.L. Gore) by Z.
Rischar, M. Sliva, K. Ladao, R. Brogmus, B. Grivet, R. Johnson, J. Sundin, D. Woods, D. Cappello, R.
Lonzaga, S. Hunker, J. Rankin
Aspen B Room – Mechanical Engineering Oral Presentations
Session 1 – Dr. Zach Lerner, Moderator
8:00-8:20am – “Knee Rehabilitation and Goniometer Device” (client: Flagstaff Medical Center,
sponsored by W.L. Gore) by A. Palacios, G. Borcher, C. Kornowski, J. Reynolds, and J. Wang
8:25-8:45am – “Equinus Exoskeleton” (client: Dr. Zach Lerner, sponsored by W.L. Gore) by B. Begay, A.
Grant, R. Libby, E. Michel, H. Rentschler8:50-9:10am – "Solar Air Heater" (Client: Salt River Projects) By: C. Aaker, A. Abuouf, A. Bizhaloni, W.
Bain, T. Begay, B. Dunn, T. McCormack, W. Senseman
Session 2 – Perry Wood, Moderator
9:20-9:40am –“Gore Bioelectric Generation” (client: W. L. Gore) by T. O’Rourke, B. Moll, D. Garcia, A.
Mullen, A. Autrand, Y. Chi, Q. Liu, J. Havely
9:45-10:05am –“Honeywell Reference Pressure Regulator” (client: Honeywell) by W. McGinn, J. Loos,
A. Rustaey, M. Azofeifa, Y. Zhang
10:10-10:30am – “Honeywell Solenoid” (client: Honeywell) by J. Gill, M. Marty, R. Rumfola, N. Russell
Session 3 – Perry Wood, Moderator
10:40-11:00am – "Environmental Enclosure" (client: Orbital ATK) by W. Creagan IV, B. Zgurich, R.
Lopez, and A. Kee
11:05-11:25am –"Launch Vehicle Enclosure" (client: Orbital ATK) by B. Cook, M. Deschine, D. Edmonds,
J. Smith
Aspen C Room – Computer Science Oral Presentations
Session1 – Austin Sanders, Moderator
8:00-8:20am – “Cloud-based API proxy for on-Premises Hotel” (client: SkyTouch Technology) by P.
Patel, A. Ramirez, S. Strickland, J. Serafin
8:25-8:45am – “User Interface for Bio-molecular Simulator” (client: NAU Wireless Networking and
Smart Health lab) by C. Chatwin, J. Gutman, M. Burns, T. Brelje
8:50-9:10am – "Cloud Storage Reclamation" (client: IBM Spectrum Protect) by I. Bigsby, M. Cocchi, R.
Deen, B. George
Session 2 – Dr. Eck Doerry, Moderator
9:20-9:40am –"Ecological Assessment Tool" (client: NAU's Health and Human Development Lab ) by C.
Spears, A. Martinez, J. Shak, J. Bassler9:45-10:05am –“Ecological Information by Location” (client: NAU Eco-informatics Research Group) by
B. Bernal, C. Hayes, M. Hartzell, A. De La Torre
10:10-10:30am –“Low-Cost Mobile Hydrology Reporting” (client: NAU Complex Systems Informatics
Laboratory (CSIL)) by L. Arroyo, L. Brewer, R. Ladwig, K. Ruddy
Session 3 - Dr. Eck Doerry, Moderator
10:40-11:00am – "Mars 2020 Rover Dust Analysis for Drill” (client: NASA Jet Propulsion Laboratory) by
H. Rainen, A. Nelson, A. Paquette, C. Beck
11:05-11:25am –"Mobile CO2 Solutions" (client: NAU Richardson-Carbone Lab) by S. Beals, J. Beasley,
A. Greene, J. Kelroy
Pinyon Room – Electrical Engineering Oral Presentations
Session 1 – Ashwija Korenda, Moderator
8:00-8:20am – "Micron DRAM" (client: Micron) by Abdulrahman Alqahtani, Dmetria Shepherd, Colby
Weber, Jinming Yang, Zeyu Zhang
8:25-8:45am – "Container Home" (client: Ben Ruddell) by Tianyi Jiao, Shixing Shen, Julius Waintrub,
Pengyu Zhang
8:50-9:10am – "Predictive Communications" (client: Abol Razi) by Fahad Almaraghi, Qiyuan Huang,
Hanxiao Lu, Chaoju Wang, Yuting Zhang
Session 2 - Ashwija Korenda, Moderator
9:20-9:40am –"Explosive Ordinance Device Robot" (client: Abol Razi) by Chu Huiwen, Yazhou Li, Cody
Varner, Wen Zening, Sixian Zhang
9:45-10:05am –"SISU: FPGA" (client: Paul Flikkema) by Taylor Bruce, Dillan Mills, Colt Morris, Ziwei Wu,
Huanyu Zhou
10:10-10:30am – "Grid Connected Converter" (client: Venkata Yaramasu) by Mohammed Abu Radhi,
Fahad Alghareeb, Sayaf Almari, Kaiqiong Ji, Di Miao
Session 3 - Ashwija Korenda, Moderator
10:40-11:00am – "Hardware One Time Pad" (client: CipherLoc) by Ian Burke, Earl Judge, Bradley Racey,
Brayden Villa11:05-11:25am –"NASA Solar Array" (client: NASA Marshall Space Center) by Daniel Krollman, Alexander Mueller Ballroom A – Civil Engineering and Environmental Engineering Oral Presentations Session 1 – Dr. Paul Gremillion, Moderator 8:00-8:20am – “ASCE Concrete Canoe” (Client: National Concrete Canoe Competition and NAU ASCE) by K. Adams, G. Boschetto, J. Leon, B. Peterson, Z. Radovich 8:25-8:45am – “ASCE Steel Bridge” (Client: American Institute of Steel Construction and NAU ASCE) by I. Block, I. Connair, T. Erdmann, M. Parrish 8:50-9:10am – “PCI Big Beam Contest” (Client: Precast/Prestressed Concrete Institute (PCI) and TPAC) by R. Crouch, S. Gergal, F. Rojo, B. Wagoner Session 2 – Dr. Willie Odem, Moderator 9:20-9:40am –“Insulated Cinder Blocks and Small Diameter Timber” (Client: Dr. Tuchscherer) by T. Albers, S. Carnes 9:45-10:05am –“Residential Garage Addition” (Client: Andrew Lamer) by M. Herrera, M. Pillari, T. Poston, J. Sobieski 10:10-10:30am – “Ryan’s Trail Road Redesign” (Client: Dianne McDonnell) by Y. Cheng, M. Moten, P. Schrandt, T. Snipes Session 3 – Dr. Willie Odem, Moderator 10:40-11:00am – “AZ Water Student Design Competition: Wastewater Facility Design” (Client: AZ Water) by N. Babcock, J. Ward, M. Ward, R. Winter 11:05-11:25am – “Copper Age Mine Site Remediation” (Client: Bureau of Land Management) by L. Garcia, S. Harvey, C. Haskie, S. Reddinger
Juniper Room– Engineering, CS, and CENE Oral Presentations Session 1 – Engineering, David Richter, Moderator 8:00-8:20am – Beyond the Slopes presents EZ-Ride, a snowboarding recreational training aid by B. Aylward, J. Collins, A. Corr 8:25-8:45am – Mukava by Nissnass, a portable thermoelectric cooler and heater by A. Alajmi, K. Appelt, J. Atkinson, M. Elsdon. 8:50-9:10am – Visage Processing presents Chronos, a 3D printing post-processing device by R. Corbin, M. Duray, M. Stoy, G. Wright Session 2 – Computer Science, Austin Sanders, Moderator 9:20-9:40am –“CrossDoc: An Improved Commenting System” (client: NAU, Palmer lab) by G. Smith P. Huettl K. Moore and B. Saganey. 9:45-10:05am – "Next Generation Bench Test Utilities" (client: Honeywell Aerospace) by J. Baker, R. Rogers, E. Sifuentes, S. Stapleton 10:10-10:30am – “Smart Shopping” (client: Michael Leverington) by Kalen Wood-Wardlow, C. Simcox, K.r Schindele, T. Back Session 3 – Civil and Environmental Engineering, Agnes Drogi, Moderator 10:40-11:00am – “Alternative Septic System and Irrigation Design” (Client: Adam Bringhurst) by A. Alkandari, C. Akine, D. Norfleet, W. Richardson 11:05-11:25am – “ASCE Environmental Design” (Client: Pacific Southwest Regional Conference NAU ASCE) by A. Anzar, S. Carawan, P. Reilly, C. Rhodes
AFTERNOON SESSIONS (1:10PM – 3:40PM)
Aspen A Room – Mechanical Engineering Oral Presentations
Session 4 – Dr. Anthony Nix, Moderator
1:10-1:30pm – "Antenna Gimbal" (client: Dynamic and Active Systems Lab) by K. Albright, K. Barr, D.
Branges, D. Johnson
1:35-1:55pm – "3D Filament Recycler" (client: Mechanical Engineering Dept, Sponsored by W.L. Gore)
by A. Abdulghafour, M. Hsu, N. Tabac, M. Yasuda
2:00-2:20pm – “SAE Aero Design Competition” (client: Dr. David Trevas, sponsored by W.L. Gore) by L.
Veteto, C. Rich, M. Torres, A. Almuhanna, S. Alazmi
Session 5 – Perry Wood, Moderator
2:30-2:50pm –“Renewable Energy Toolkit” (client: Dr. Tom Acker) by M. Jarkhi, T. Alenezi, H.
Alsharhan, M. Alsharidah, F. Alsuwailem
2:55-3:15pm –“Mobile In-Vitro Neurovascular Cast System” (client: ATI) by N. Alosaimi, J. Edison, J.
McCallin, M. Sussman
3:20-3:40pm – “BDL Particulate Characterization” (client: BDL) by K. LoGrande, M. Almutairi, S.
Aldhufairi
Aspen B Room – Mechanical Engineering Oral Presentations
Session 4 – Dr. Jennifer Wade, Moderator
1:10-1:30pm – “Collegiate Wind Competition Mechanical Team” (client: Department of Energy &
National Renewable Energy Laboratory/ Professor Willy) by S. Alsahli, D. Hardy, K.Joe, S McMahon, J.
Peterson, D. Sallaway
1:35-1:55pm – "Collegiate Wind Competition Electrical Design” (client: Department of Energy &
National Renewable Energy Laboratory/Professor Willy) by Y. Alali, A. Dahlmann, A. DeLuca, E. Heiland,
B. Macleod, T. Scott, Q. Zhao
2:00-2:20pm – Collegiate Wind Competition Market Team (client: David Willy) by A. Benson, A. Cheslic,
C. Collins, M. Green, L. Segura, M. VogelsangSession 5 – Dr. Jennifer Wade, Moderator
2:30-2:50pm –“Retekt: Climbing Hold Resurfacer” (Client: John Doskics/Flagstaff Climbing) by D.
Simon, K. Connelly, D. Shumway, M. Almutairi, A. Alenezi
2:55-3:15pm –“Plasticity Modeling” (client: Dr. Feigenbaum) by O. AlMutairi, N. Alkhalaf, A. AlMutairi,
M. Alhabashi
3:20-3:40pm – “Hozhoni Assistive Device” (client: Hozhoni Foundation Art Studio, Sponsored by W.L.
Gore) by M. Alajmi, M. B. Alajmi, H. Aldhafeiri, S. Almutairi
Aspen C Room – Computer Science Oral Presentations
Session 4 – Austin Sanders, Moderator
1:10-1:30pm – "Bluetooth Application for Engine Data Download and Display" (client: Honeywell) by J.
Griffith, R. McIntosh, B. Samz, C. Stevens
1:35-1:55pm – "Tailored Tutoring Web Portal” (client: Tailored Tutoring Co.) by J. Garcia, T. Mitchell, A.
Kahn, T. Walker
2:00-2:20pm – "Brain Boosting Web Game" (client: Barbara Jenkins) by V. Messenger, N. Franklin, A.
Salazar, A. Moyers
Session 5 - Austin Sanders, Moderator
2:30-2:50pm –"English Proficiency Analyzer” (client: NAU Applied Linguistics Speech Lab) by J. Shaffer,
L. Montes, E. Strauss, M. Quintana
2:55-3:15pm –“Automatic SPICE Data Synchronization” (Client: United States Geological Survey) by C.
Combs, K. Ross, T. Thatcher, D. Williamson
3:20-3:40pm – "Multi-factor Analysis to Reduce False Alarms in Intensive Care Units" (client: NAU
Wireless Networking & Information Processing Lab) by N. Payton- McCauslin, A. Grzesiak and J. Todd
Pinyon Room – Electrical Engineering Oral Presentations
Session 4 – Arnau Sugranyes, Moderator
1:10-1:30pm – "Instrumented Bike - Team 1" (client: Jun Ho) by Robert Briggs, Junting Chen, Hao Wang,
Hongpan Wu1:35-1:55pm – "Instrumented Bike - Team 2" (client: Jun Ho) by Xilun Liu, Peijie Qiu, Siwei Wen, Yuchang Zhang, Yifei Zhang 2:00-2:20pm – "Power Assist Bike" (client: Jane Scott) by Khalid Alghamdi, Mohammed Allahyani, James Sigler, Yun Sun Session 5 - Arnau Sugranyes, Moderator 2:30-2:50pm –"Reston's Musical Instrument" (client: Alan Turns) by Cole Kaplan, John Felsch, Paola Montoya 2:55-3:15pm –"Stand Along Power Converter" (client: Venkata Yaramasu) by Mohammad Alrashidi, Nan Duan, Jason Foster, Lutong Ji, Yu Zhou 3:20-3:40pm – "3-Way Syringe Mixer" (client: Aneuvas) by Vincent Jencks, Colton Smith, Andrew VanDenburgh, Handi Xi, Yunchen Zhu Ballroom A – Civil Engineering and Environmental Engineering Oral Presentations Session 4 – Dr. Fethiye Ozis, Moderator 1:10-1:30pm – “Air Quality Analysis” (Client: CECMEE) by K. Aldahlan, M. Alkandari, D. Chambel, X. Tang 1:35-1:55pm – “USFS Geomorphic Road Analysis and Inventory Package (GRAIP)” (Client: United States Forest Service) by J. Campo, A. AlQashan, P. Jones, Z. Kretsch 2:00-2:20pm – “Oak Creek Floodplain Study” (Client: Adam Bringhurst) by R. Coronado, E. McAnally, P. Smith, Z. Wu Session 5 – Dr. Jeff Heiderscheidt, Moderator 2:30-2:50pm –“Wrong Way Driving Detection System” (Client: Dr. Russo) by H. Albhrani, T. Fisher, I. Rodrigues, Z. Jenkins 2:55-3:15pm –“San Simon Dam Evaluation” (Client: Bureau of Land Management) by M. Gallio, J. Garrison, J. Lu, B. Zeng 3:20-3:40pm – “Montezuma Castle National Monument Traffic, and Parking Assessment and Re- Design” (Client: National Park Service) by F. Alkhaldi, B. Hernandez-Ing, J. Robinson, C. Washington, A. McLaughlin, R. Johnson
Juniper Room – Mechanical and Electrical Oral Presentations Session 4 – Mechanical Engineering, Dr. Hesam Moghaddam, Moderator 1:10-1:30pm – “The Wonder Factory: Spirograph” (client: The Wonder Factory, sponsored by W.L. Gore) by F. Alanezi, Y. Almutairi, S. Albarazi, B. Albarazi, K. Alhusainan 1:35-1:55pm – "The Wonder Factory: Slingshot” (client: Wonder Factory Inc.) by A. Howaishel, A. Alzafiri, D. Aldhefeeri, F.Alotaibi, M. Alsubiee. 2:00-2:20pm – "Design for Disability simulation" (Client: Dr. Sarah Oman) By Z. Almutairi, E. Almutairi, D. Alshammari, Y. Alazmi Session 5 – Mechanical and Electrical Engineering, Jeremy Cook, Moderator 2:30-2:50pm – "Augmented Mobility Project" (client: Krista Branch/FUSD) by Mohammed Alfatouh, Yutian Deng, Adam Douglass, Kristen Shryack, Mengyuan Zhang 2:55-3:15pm –“Marshall Classroom (sensory board)” (client: Marshall Elementary, Sponsored by W.L. Gore) by A.Almutairi, M.Alkatan, Y.Alkatan, T.Alansari, A.Almutairi 3:20-3:40pm –"Marshall Playground Interactive Device" (client: Marshall Elementary, Sponsored by W.L. Gore) by M. Alsewaji, A. Alazmi, K. Alenezi, A. Alenezy, S. Aldawsari
You can also read
