Flash News spring - summer 2019 - Ocean Sailing Enterprises
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Flash News spring - summer 2019
Newsletter S/S - 2019
Grand Soleil 80
The new Gran Soleil 80’, designed in co-operation with naval architect
Ceccarelli, is a real „custom“ project. Born for cruising, she has strong
attitudes for racing too. The boat has partially removable furniture to
be lighter in weight during races. They also studied „double“ solutions
for the rig, to be able to convert the yacht from „Cruiser“ to „Racer“ very
quickly.
Having this perspective in mind, the boat yard commissioned Bamar
both standard and custom hydraulic cylinders, and for the headstay,
they requested an EJF2 electric furler with tensioning cylinder combined
with aluminium furling foils for the „Cruising“ version. In the race
configuration, they will fit a carbon forestay combined with a hydraulic
tensioning cylinder.
The official presentation is scheduled in May at the Grand Soleil Cup
2019 in Porto Piccolo (TS). Bamar attended sea trials with the team to
fine-tune the rig.
Beside, an informal image taken during sea trials.
Newsletter S/S - 2019
Newsletter S/S - 2019
Special
refit
Bamar does not only supply new products, but it also carries out „Refits“ and
maintenance at any level. From the „small“ electric furler to super yacht equipment.
Therefore, it is possible to schedule a service to keep equipment in perfect working
order. Each unit is inspected, and our engineers issue report in which the status of
each individual component is described. Once the maintenance level is determined,
a team of skilled technicians performs the service. Finally, the mechanism is tested
on the test bench. Once tests have a positive outcome, the engine is ready to be
fitted back on board and do its job for many years.
Newsletter S/S - 2019 Electric Foresail Furlers Upgrade Bamar supplied many „Old“ aluminium MEJS furlers with round flange between 2007 and 2016. Therefore, we thought about manufacturing a custom s.s. round flange for the new stainless steel GFSE furlers. No structural changes are thus required thanks to the total compatibility between the two versions, should sailing yachts equipped with the „old“ model choose to „UPGRADE“ their headstay with the new high performing s.s. model.
Newsletter S/S - 2019
2019 Boat Shows
After an intense 2018-2019 season, we start programming our 2019 -2020 boat show season. Bamar
will exhibit, either directly with its Team or through Distributors, at scheduled International Boat
Shows. Therefore, boat owners and professionals may have the chance to „touch“ products and
latest news displayed at the following events:
10 - 15 September 2019 13 October 2019
Cannes Trieste
49th Annual
12 - 15 September 2019 23 - 27 October 2019
Newport Hamburg
13 - 22 September 2019 19 - 21 November 2019
Southampton Amsterdam
18 - 23 September 2019 7 – 15 December 2019
LA ROCHELLE
PORT
DES
MINIMES
La Rochelle Parigi
19 - 24 September 2019 18 – 20 January 2020
Genova Düsseldorf
Newsletter S/S - 2019 Grand Soleil Cup 2019 The race dedicated to all Grand Soleil owners takes place in Porto Piccolo (TS) on 18th and 19th May. After some editions in the Tyrrhenian Sea, the event returns to the top Adriatic hosted by Porto Piccolo Yacht Club. The race / event formula suitable for all the types of crew is confirmed. The only prerequisite is being a Grand Soleil owner. Bamar is a long-term supplier of the Shipyard, and this year we confirm once more our participation to the race as Sponsors. The winner is offered an RLG EVO as a prize, while all registered owners receive Bamar branded gadgets, including the exclusive Bag made from recycled sail fabric, in limited series with the event logo, produced by Rivelami. New Sardiniasail A team that aims at promoting social reintegration projects, through the creation of a sailing school with tariffs accessible to all and for people of any age. This is the praiseworthy project of Simone Camba. With the help of sponsors, he recently purchased a G34 made by Cino Ricci and designed by Finot for the Sailing Tour of Italy held until a few years ago. Bamar is „on board“ with a ROLLGEN EVO 08, which will be used during the busy schedule of events and races the boat and its Team will participate to.
Newsletter S/S - 2019
Motorized Pad Eyes
The range of new PE & PI, electric and hydraulic
motorized Pad Eye furling motorizations, keeps on
increasing.
The extremely compact hydraulic unit, size WL 20t,
with direct motor in-line with the stay, has been
installed on an 80‘ catamaran.
These furlers were designed to be combined with NO
TORSION stays and EVO high performance halyard
swivel. The photo presents two hydraulic units with
motor in line with the stay, 10 & 20 tons max WL
Blocks For 2:1 Halyards
Nowadays, the design trend is to equip the extreme
foredeck of new sailing yachts with a furling sail
hoisted on a No Torsion stay.
Compatibly with dimensions and loads involved, it is
therefore required to hold high halyard loads. You thus
need to create a 2: 1 tackle on the halyard, combining
the halyard swivel, placed at the upper end of the stay,
with a block that allows it „splitting“ to share the load.
In combination with the EVO series, Bamar proposes a
new line of self-contained blocks, connected to the
Halyard swivel through a high textile loop module
and a pin with two „saddles“. Compact dimensions,
lightweight and maximum flexibility are the features
that distinguish this new „Block“, available in sizes
from 5t to 20t WL.
Newsletter S/S - 2019 Boards And Fittings Intended to be combined with tack and head on CODE “0”s and Drifters, they are made of anodized aluminum and represent the correct refinement of furling sails on removable stays. Designed to be fitted on RLG-EVO drums and halyard swivels, they can nonetheless be used by sailmakers and riggers for any similar application, or to improve sail construction. Their specially designed shape allows the stay to be “swaged” and tack bands to be sewn. Low Friction Rings And Thimbles Combined with ultra-stretched high performance textile stays of modern construction, these fittings made of aluminum alloy contribute to complete the construction of on-board manoeuvres. The now ubiquitous „low friction“ rings find various applications. From simple returns, to the construction of textile tackles used to replace classic blocks. Lightweight and very simple, they are nothing but the modern version of tackle systems used on galleons. The series of thimbles in anodized aluminum is designed to match perfectly with RLG EVO drums and halyard swivels. It can however be used to complete the rigging on stays and textiles stays in general.
References
Mylius Nobiskrug Southern Wind Shipyard Perini Navi
65’ 145m s/y “A“ 82 #1; #2; #3 37 m Ketch Carlotta
76’ Electric captive winches and 94 #1; #2; #3 56 m Ketch Selene
GFSE s.s. electric flush-deck furlers + hydraulic boom vangs 100 #7; #9; #10 52 m Ketch Jasali II
foresail furlers and cylinders 100 #11; #12; #13 48 m Ketch Morning Glory
102 #1; #2; #4; #5; #12 46 m Ketch Aquarius
Hydraulic cylinders and furlers 38 m Sloop Yam2 (ex P2)
Complete maintenance of
furlers and cylinders
Bodrum Oguz Marin Yapluka Discovery Yachts Sunreef Yachts
40 m Ketch 92’ Mashua Blu 67 #1 Tilly Mint 74’ #2, 3, 4
GFI hydraulic foresail furlers, GFI hydraulic foresail furlers 67 Sapphire 80 # 1, 3, 4, 5, 6, 7
cylinders and hydraulic panels EJF electric foresail furling EJF electric foresail furlers
motorizations 74’ #5, 6, 80 #2, & 88’
GFI hydraulic foresail furlers
60 #1, 2, 4, 6, 7, 8, 10
PE electric Pad Eye
motorizations for CODE 0sReferences
Vismara Marine Grand Soleil Baltic Yachts Offshore Spars
V80 Nakupenda GS58 67 #02 BFBM electric and hydraulic
V62 #2 Yoru GS48’ RACGS48’ GFSE 12 ss electric flush-deck boom furling motorizations
V62 #3 Wizard PERFORMANCE foresail furling system
V70 Being delivered NEW GS 80’
V100 EJF electric foresail furling
Electric & hydraulic flush-deck motorizations
foresail furlers and hydraulics BHP hand pumps, vangs and
cylinders
Solaris Ice Yachts Vallicelli Nautor’s Swan
44’ – 47’ – 50’ – 55’ – 58’ – Cat 67’ 80’ H2O 78 #02, 3
68’ – new 64’ EJF2 electric foresail furler General maintenance of the GFSI 16 s.s. hydraulic foresail
GFSE 12 and GFSE 16 s.s. C5 manual foresail furler hydraulic supply furler with spherical fulcrum
electric flush-deck foresail BWSE electric furling PI 10t hydraulic Pad Eye
furlers motorization for bowsprit motorization for CODE 0s
BHP hand pumps, vangs and
cylindersNewsletter S/S - 2019
ITALY RETAILERS
Our retailer network in Italy
Campania Marche
Sea Office Snc Napoli (NA) info@seaoffice.com veleria@challengersails.
Veleria Challenger Sails Senigallia (AN)
com
Momar Sport srl Scafati (SA) info@momarsport.it
veleria@challengersails.
Sailing Solution Pozzuoli (NA) info@sailingsolution.it Veleria Challenger Sails Marina Dorica Ancona (AN)
com
Tecnovela Salerno (SA) info@tecnovela.com
commerciale@welcome-
Welcome Sails Snc Ancona (AN)
sails.it
Emilia Romagna FORTEK Nautica San Benedetto del Tronto (AP) nautica@forteksrl.com
veleria@veleriasouth-
South Sails Snc Forlì (FC)
sails.it Puglia
Gaspari Srl Cesenatico (FC) gasparisrl@tiscali.it
Banks Sails Europe Central loft Bari (BA) info@bankssails.it
Pier 12 Srl Marina di Ravenna (RA) acquisti@pier12.net
info@medsailingservice.
Med Sailing Service Srl Modugno (BA)
Sail Service Marina di Ravenna (RA) info@sailservice.it com
Nautic One Rimini (RN) info@nauticone.it info.garganoyachting@gmail.
Gargano Yachting Foggia (FG) com
Oltre srl Porto Corsini (RA) info@oltremarine.it
Ondabuena Taranto (TA) Info@ondabuena.it
Water & Wind San Giovanni in Marignano (RN) waterandwind@libero.it
Veleriafantasio Taviano (LE) info@veleriafantasio.it
Fuzzi Rigging Di Fuzzi
San Giovanni in Marignano (RN) davidefuzzi@gmail.com
Davide
Sardegna
Casa Del Pescatore Cesenatico (FC) info@casapescatore.it
Veleria Zattoni Sails Forlì (FC) zattonisails@libero.it Creative Yachting creativeyachtingsolu-
Cagliari (CA)
Solutions tions@gmail.com
Friuli Venezia Giulia Veleria Andrea Mura Cagliari (CA) info@mura.it
Sardinia Rigging Srl Sassari (SS) info@sardiniarigging.com
Nautica Sail Point Srl Latisana (UD) info@nauticasailpoint.com
Lianti Rigging Service Arzachena (SS) Tel. +39 348 6938579
Nautimarket Srl Carlino (UD) vendite@nautimarket.com
Sailboard Olbia Olbia (OT) sailboard@tiscali.it
Motomarine B2C Srl Barcola (TS) shop2@motomarine.it
commerciale@ondab-
Onda Blu Alghero (SS)
Wave Sailing Point Trieste (TS) info@wavesailing.it lumare.it
Zadro Sails Torviscosa (UD) info@zadro.it
Sicilia
Lazio
info@sailingboatservice.
Sailing Italia Services Sas Palermo (PA)
com
C.S.A. Nautica Srl Fiumicino (RM) info@csanautica.it
Sailing Team Srl Siracusa (SR) info@sailingteam.biz
info@italnauticaservice.
Italnautica Service Srl Fiumicino (RM)
com Veleria Sonica Sails Catania (CT) sonicasails@subservice.it
Veleria Fastelli Maurizio Fiumicino (RM) veleriafastelli@gmail.com
Sail World Srl Nettuno (RM) info@sailworld.it
Toscana
Paride Nautica Nettuno (RM) +39 06 9804088 EMS di Olivari e Tarlati snc Porto Ercole (GR) etrurmar@tin.it
D-RIGGING Roma (RM) d_rigging@yahoo.com lorenzonimario@gmail.
Top Service Sas Firenze (FI)
com
Liguria Full Service Sas Viareggio (LU) info@fullserviceviareggio.it
Punto Arno Srl Marina di Pisa (PI) info@puntoarno.it
Soluzioni Tessili di Baci-
Lavagna (GE) info@soluzionitessili.eu
galupo OSN Yacht Rigging Montescudaio (PI) info@osnrigging.com
Borio Elio & C. Snc La Spezia (SP) borio.elio@gmail.com shipmarinesnc@yahoo.
SHIP MARINE Porto Ercole (GR)
com
ACME di Pierfrancesco Cè Le Grazie di Portovenere (SP) pfcrigging@libero.it
Vuoi fare vela? Marina di Grosseto (GR) info@vuoifarevela.com
RIGSIST Imperia (IM) rigsist@gmail.com
F.D. di Francesco Dinelli Viareggio (LU) info@dinelli.net
Lombardia
Trentino Alto Adige
I 40 Ruggenti Srl Milano (MI) giorgio@i40ruggenti.it
Acqua Service di Malfer info@acquaserviceriva.
L’Altraranda Srl Milano (MI) info@laltraranda.it Riva del Garda (TN)
Luca com
Veleria Gardasail Toscolano Maderno (BS) info@gardasail.com
Cantiere Zuanelli Snc Padenghe sul Garda (BS) info@zuanelli.it Veneto
Sail & Rigging Caorle (VE) info@sailrigger.it
SailTribe Rigging Service Bardolino (VR) dario@dailtribe.it
Sail and Rigging Chioggia (VE) info@sailandrigging.comNewsletter S/S - 2019 WORLDWIDE DISTRIBUTORS Our worldwide distributors’ network America Argentina Cruz del Sur Nautica San Fernando infomastiles@gmail.com Canada / USA Ocean Sailing Enterprises, Inc. Richmond, Bc oceansailing.ca Mexico PV Sailing Services Pampano pvsailing.com Sint Maarten FKG Marine Rigging and Fabricating N.V. Philipsburg fkg-marine-rigging.com Asia & Middle East Israel Ron Nadav Yacht Maintenance Marina Herzliya ron@ronym.co.il Japan Okazaki Yachts Ltd Kanagawa yachts.co.jp Japan U.S. Yachts & Customs. Inc Kasuga, Fukuoka usyachts.co.jp Russia Water World Komsomolsk-On-Amur kater-dv.ru Thailand Sail In Siam Chon Buri sailinsiam.com Turkey Baran Group Istanbul baran-group.com Europe Austria Alltechnik Handelsges Ges.M.B.H. Biedermannsdorf B. Wien allroundmarin.com Azores Boat & Sail Service Sao Miguel boatsailservice.com Canary Islands Nordest Tenerife nordest-canarias.com Croatia Aspar Obrt, Vl Arsen Dobrijevic Matulji aspar-rigging.hr Cyprus Ocean Marine Equipment Ltd Limassol oceanmarine.com.cy Finland RopeX Turku niki.timonen@ropex.fi France Voilerie Sud Corse Sail Ajaccio scs.ajaccio@free.fr France Xavier Phelipon Organisation La Rochelle xphelipon@xporganisation.fr Germany Kohlhoff Gmbh Altenholz kohlhoff-online.de Greece Meltemi Yachting Ltd Alimos, Athenssa meltemi-yachting.gr Greece Waypoint Sails and Rigging Marina of Lefkas, Lefkada waypointsails.com Holland Romar B.V. Vollenhove romarmarine.com Hungary Mimoker Budapest mimoker.hu Malta A & J Baldacchino Boat Yard Ltd. Birzebbugia ajbaldacchinoboatyard.com Norway Southern Cross Spars AS Høvik southerncross.no Poland Maszty Jachtowe Sopot spars.pl Portugal Fofovelas Lda Lagos fofovelas@sapo.pt Slovenia BLUE MARINE FF D.O.O. Boats & Nautical Equipment Portoroz bluemarinedoo@gmail.com Slovenia 16 + navtične storitve d.o.o. Izola - Slovenia Seaway Portoroz D.O.O. Portoroz seawayportoroz.com Spain C&C Rigging Barcellona ccrigging.es Sweden Examec Marine AB Tomelilla sales@examecmarine.com Switzerland Bucher+Schmid Bootswerft Ag Lucerna bucher-schmid.ch United Kingdom IMP Enhancing Performance & Style Royston improducts.co.uk Oceania Australia Boating Hardware O’Connor boatinghardware.com.au New Zealand Doyle Sails New Zealand Ltd Avondale - Auckland doylesails.co.nz
Newsletter S/S - 2019
New Showcases And
Sales Points
As we consolidate our partnership with historical
„distributors“, Bamar sales network is expanded thanks to
collaboration with many local realities. In these pages, you
will find a complete list of contacts in Italy whom you may
contact directly for assistance or purchase. In the meantime,
locations where the public can touch Bamar products on
display are expanding.
• NAUTICA SAIL POINT Aprilia Marittima Latisana (UD)
• MOTOMARINE B2C Barcola (TS)
• I 40 RUGGENTI Milano
• RIGSIST Imperia
• CANTIERE ZUANELLI Padenghe sul Garda (BS)
• SAILTRIBE Bussolengo (VR)
• E.M.S. snc Porto Ercole (GR)
• O.S.N. yacht rigging Montescudaio (PI)
• NAUTIC ONE Rimini
• WELCOME SAILS Ancona
• VELERIA CHALLENGER SAIL Cesano di Senigallia (AN)
• FORTEK San Benedetto del Tronto (AP)
• PARIDE NAUTICA Nettuno (RM)
• BANK SAILS Bari
• MED SAILING SERVICE Modugno (BA)
• SEA OFFICE Napoli
• SAILING ITALIA SERVICE Palermo
• SAILING TEAM Siracusa
• CREATIVE YACHTING SOLUTIONS Cagliari
• ONDA BLU Alghero (SS)
New Distributors
Bamar is pleased to announce the appointment of new
distributors in various countries. We are certain that
these agreements will reinforce our presence on the
market, and will further contribute to improving both
technical and commercial service to customers.
SWEDEN Examec AB - Tomelilla
FINLAND Ropex - Turku
ITALY
• Sail and Rigging Chioggia (VE)
• Fuzzi Rigging San Giovanni in Marignano (RN)
• Cooperativa Casa del Pescatore Cesenatico (FC)
• Vuoi fare vela? Grosseto (GR)
• F.D. di Francesco Dinelli Viareggio (LU)
• Fortek Nautica San Benedetto del Tronto (AP)
• D-Rigging Roma (RM)
• Tecnovela Salerno (SA)
• Ondabuena Taranto (TA)
• Veleria Fantasio Taviano (LE)
• Sailboard Olbia Olbia (OT)
• Onda Blu Alghero (SS)
We therefore welcome these new dealers in the great
Bamar family.Newsletter S/S - 2019 Quality One of the main targets of the company is to ensure complete and constant customer satisfaction, to be reached by continuous Quality improvement. In this context, the need to ensure that all products that are being manufactured are in compliance with the required specifications, led Bamar to the development of a quality management system that has been certified in accordance with the standards ISO 9001 / UNI EN ISO 9001 : 2015 (SGS). In the design phase, we proceed with the creation of a FEA model; then, once the production phase with CNC machines is completed, we first inspect the correspondence of the item made with the original design. Finally, after the final product has been assembled, we carry out tests on the test bench: we check product compliance, no-load operation and with maximum working load. The entire production cycle is carried out in Italy in our headquarters in Forli. Bamar Facilities In July 2010, Bamar premises moved to the industrial district of Villa Selva Forlì - Via F.lli Lumière, 45. The new area of 18.000 square metres also includes the mechanical workshop, in order to guarantee a greater synergy between workshop and warehouse staff, and speed up production process, machining, assembly, test and product delivery. Bamar workshop boasts a production plant made by vanguard CNC machining centres that allow for high flexibility and production quality. Our company may thus grant a 360° service, starting from the mere client’s requirement and ending up with the finished product.
Via F.lli Lumière 45 47122 Forlì (FC), Italy +39 0543 463311 info@bamar.it bamar.it BamarSailingEquipment
You can also read
