Support to Society CERN against COVID-19 Task Force Seminar - Andre Henriques - HSE/OHS - CERN Indico
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Support to Society CERN against COVID-19 Task Force Seminar Andre Henriques – HSE/OHS 20th May 2020
Support to Society
CERN against COVID-19 Task Force launched just after confinement
Need for a quick and targeted support to local community
Large variety of initiatives
Focus on the support to local community
+150 VOLUNTEERS !!!
(@ CERN or @ Home)
A. Henriques | CERN against COVID-19 Task Force
20/05/2020 2
Support to Society
CERN Fire & Rescue Service
Support for COVID-related emergency response to local community
(Pays de Gex and Genève)
20 interventions (compared to 5-10 / year in nominal conditions)
Information session to HUG personnel: Recorded procedure to dress
and un-dress protective coveralls
Logistical support
Distribution of raw materials and temporary storage of PPE
Usability test of PPE design initiatives (masks, shields)
+ 50 Firefighters
CERN / HUG collaboration
A. Henriques | CERN against COVID-19 Task Force
20/05/2020 3
Support to Society
Hydro-alcoholic Hand Sanitiser
COVID-19-specific hand sanitizer
Initiated and produced by the TE-VSC Chemical Lab
Characteristics: WHO ‘recipe’, labeled according to EU requirements
Total Production (L)
10000
8000
6000
CERN
4000 Donation
2000
100 ml
0
16 March 20 April 14 May
10 000 liters produced eq. 100 000 bottles !!
(+ 6000 donated to local community)
A. Henriques | CERN against COVID-19 Task Force
20/05/2020 4
Support to Society
Hydro-alcoholic Hand Sanitiser
Benoit Teissandier TE-VSC
Louise Viezzi TE-VSC
Pierre Maurin TE-VSC
Paolo Chiggiato TE-VSC
Mauro Taborelli TE-VSC
Cedric Garino SMB-SC
David Challoin SMB-SC
Nina Underhill SMB-SC
8 Volunteers
Visits by:
• Director-General
• Sous Préfet de Gex
A. Henriques | CERN against COVID-19 Task Force
20/05/2020 5
Support to Society
Face shields
Raw material Donations:
Face shield - type-1 Face shield - type-2 Face shield - type-3
COVID-19-specific PPE: Protection against droplets and splashes of liquid only
Design based on applicable EN standards
Characteristics: Light, ergonomic, easy to put on, compatible with safety helmet
Release under CERN Open Hardware Licence (COHL) v2 under preparation
A. Henriques | CERN against COVID-19 Task Force
20/05/2020 6
Support to Society
Face shield type-1 ‘Factory’
Production of Face Shields 1.0 Meyrin Prevessin
15000
Production line Production line
(6th April) (24th April)
10000
5000
0
B 187 B 927
50 / day 900 - 1000 / day Visits by:
• Director-General
15 000 shields produced • Director for A&T
• Sous Préfet de Gex
+10 000 shields delivered (Donation / CERN use) • Ambassador of
SCEM: 50.43.30.299.0 France to the UN in
Geneva
A. Henriques | CERN against COVID-19 Task Force
20/05/2020 7
Support to Society
Face shield type-1 ‘Factory’
Valery Akhnazarov EP-UAT Paolo Martinengo EP-DT-TP
Diego Alvarez Feito EP-DT-EO Marco Marziani EP-UAT
Christophe Bault EP-DT-EO Gregory Maury TE-MSC-MDT
Richard Beltron TE-MSC-MM Jacky Mazet TE-MSC-MDT
Jérôme Bendotti EP-DT-CO Jan Mladek EP-UAT
François Boyer EP-DT-EO Eraldo Oliveri EP-DT-DD
Andrea Catinaccio EP-DT-EO Nicola Pacifico EP-DT-TP
Antonio Conde EP-CMX-EI Fabio Pellegrino EP-AIO
Ruddy Costanzi EP-DT-DD Juan Carlos Perez TE-MSC-MDT
Evgeny Danilevich EP-UAT Francisco Perez EP-DT-CO
Neil Dixon EP-DT-CO Quentin Piazza EP-DT-CO
Adam Drozd EP-DT-EF Guillaume Pichon TE-MSC-TF
Jakko Esala EP-DT-EO Francois-Olivier Pincot TE-MSC-MDT
Didier Etiembre TE-MSC-LMF James Purvis HR
Philippe Favre EP-UAT Guillermo Reales EP-CMX-DA
Carlos Fernandes TE-MSC-MDT Pietro Antonio Rizzo TE-MSC-MDT
Timothee Frei EP-DT-DD Pierre Rose EP-DT-CO
Marek Hracek EP-URD Louis Rose-Dulcina EP-ADO-PO
James Iddon EP-AID-DT Fred Rosset EP-ADO-PO
Rashid Khurshid TE-MSC-CMI Gwenael Royot TE-EPC-OMS
Antonio Lafuente EP-AIO
Christian Leboube EP-ADO-PO +45 Volunteers Burkhard
Krzysztof
Schmidt
Sliwa
EP-DT
EP-DT-EO
Alessandro Mapelli EP-DT-DD
Marcel Tignolet TE-EPC-OMS
A. Henriques | CERN against COVID-19 Task Force
20/05/2020 8
Support to Society
Face shield type-2
Pierre Moyret EN-MME Rui Samoes Fernandes Lopes HSE-FB
Philippe Frichot EN-MME Alex Iribarren IT-CM
Cedric Garrino SMB-SC Pierre MOYRET EN-MME
Luca Gentini EN-MME Sebastien PETZL
Raphael Leuxe EN-MME Sabrina KISMOUNE
David Challoin SMB-SC Patrick Muffat SMB-SC
Leila Akhouay SMB-SC Laurence Nelly Planque SMB-SC
Hosni Djemel SMB-SC Fabienne Landua IR-ECO
Franck Groscarret SMB-SC Daniel Dominguez IR-ECO
Joris Monardo SMB-SC Andrea Catinaccio EP-DT
David Perez SMB-SC Roberto Cardella EP-UAT
Jerome Mercier SMB-SC Beniamino Di Girolamo ATS-DO
Sebastien Clement TE-MSC Alessandro Dallocchio EN-MME
Fernando Pedrosa EN-ACE Salvatore Buontempo EP-UCM
Richard Francis Morton HSE-OHS Diego Perini EN-MME
Francois Boyer EP-DT Jean Marc HEDE
Sascha Dungs EP-ADE Christophe Bault EP-DT
Alessandro Mapelli EP-DT
1. Support (PP) 3. Transparent visor (PET)
2. Elastic tape 4. Buckle to adjust (PP) +35 Volunteers
Production: Injection molding (Support and Buckle) 10 000 shields to arrive in June 2020
Arrive as ‘Kit’ to be easily mounted In principle for CERN internal use only
A. Henriques | CERN against COVID-19 Task Force
20/05/2020 9
Support to Society
Face shield type-3
Marc Dobson EP-CMD
Alain Meynet Cordonnier EP-CMX
Petr Zejdl EP-UCM
Maf Alidra EP-UCM
Roberto Perruzza EP-CMX
Ali Karaki EP-UCM
Maytham Ezzeldine EP-UCM
Abdelsalam Suleiman EP-UCM
Hadi Kanso EP-UCM
Cristina Penades Huesca EP-CMX
Tristan Loiseau EP-CMX
+10 Volunteers
* non-exhaustive
Production: Manual, similar to Face Shield type 1 1000 shields produced
Fully incorporated option for CERN-type helmets (~ 50% donated to local community)
A. Henriques | CERN against COVID-19 Task Force
20/05/2020 10
Support to SocietyWashable 3D-Printed masks
Test results (Certified lab)
“Grilled support”
Filtration: ≥ 97 %
Breathability: < 40 Pa
Temp. resistance: -30 to 70⁰C
Usability: Very good
PPE: Respiratory protective face mask
Characteristics: Re-usable, ergonomic, flexibility with
different filter options (i.e. change filtration %)
Design based on applicable EN standards
Equivalent Performance: at least FFP2 (EN 149)
A. Henriques | CERN against COVID-19 Task Force
20/05/2020 11
Support to SocietyWashable 3D-Printed masks
Mold A
Silicone
Mold B
Production rate
Re-useable concept:
Reduce waste / impact to
the Environment
Washable and
3D printing Silicone with 3D Injection molding biodegradable filter under
(2 / day / printer) printed mold (?) development - CERN Baltic
In contact with possible partners Group (via KUT, Lithuania)
(1 / h / mold)
In close contact with interested partners: local companies, ICRC, NGOs, Regione Piemonte (IT)
Release under CERN Open Hardware Licence (COHL) v2 under preparation
A. Henriques | CERN against COVID-19 Task Force
20/05/2020 12
Support to SocietyWashable 3D-printed masks
Markus Nordberg IPT-DI Luis Granado Cardoso EP-LBC
Katy Foraz EN-ACE Chris Thomas EP-UAT
Jerome Bendotti EP-DT William Vigano' BE-BI
Corrado Gargiulo EP-DT Remy Gauthier TE-MSC
Richard Francis Morton HSE-OHS Marzia Bernardini EN-ACE
Olivier Bernard Prouteau HSE-OHS Andre Henriques HSE-OHS
Laura Stewart TE-CRG Jose Antonio Ferreira Somoza TE-VSC
Federico Ravotti EP-DT Giuseppe Pezzullo EP-DT
Joao Batista Lopes EP-DT Francois Boyer EP-DT
Ombretta Pinazza EP-UAI Josef Sestak TE-VSC
Alex Iribarren IT-CM Roberto Cardella EP-UAT
Sebastien Clement TE-MSC Romain Gerard EN-MME
Fernando Baltasar Dos Santos Pedrosa EN-ACE Jonathan Pascal Meignan EN-ACE
Mario Di Castro EN-SMM Hans Boe IPT-DI
Jaroslava Schovancova IT-CM Pascal Secouet EP-AIO
Alessandro Mapelli EP-DT +30 Volunteers Romain Gavaggio TE-MSC
Walid Fadel HSE-OHS
A. Henriques | CERN against COVID-19 Task Force
20/05/2020 13
Support to SocietyOther initiatives
Plexiglas screen to the Gendarmerie du Pays de Gex
‘Door opener’ / ‘Button pusher’
3D printed
Industrialisation (~ 5000 pc.)
Diego Perini EN-MME
Luca Gentini EN-MME
Benoit Riffaud EN-MME
Philippe Frichot EN-MME
Cedric Garino SMB-SC
Franck Groscarret SMB-SC
David Challoin SMB-SC
8 Volunteers
A. Henriques | CERN against COVID-19 Task Force
20/05/2020 14
Support to SocietyDonations to local community
Many requests from neighbouring institutes, professionals, companies
For practical reasons and to ensure fairness in distribution, centralized supply in
collaboration with the regional authorities
Host States Relations
(F. Eder)
More info in:
https://againstcovid19.cern GE: Service du médecin cantonal /
Sous-Préfecture de Gex Service du Pharmacien Cantonal
VD: Direction générale de la santé
A. Henriques | CERN against COVID-19 Task Force
20/05/2020 15
Support to SocietyHappiness:
the science behind a smile
A. Henriques | CERN against COVID-19 Task Force
20/05/2020 16
Support to SocietyYou can also read
