Epoxy Resins and Structural Adhesives for Composite Materials Resine Epossidiche e Adesivi Strutturali per Materiali Compositi
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Epoxy Resins and Structural Adhesives for Composite Materials Resine Epossidiche e Adesivi Strutturali per Materiali Compositi
STRUCTURAL ADHESIVES EPOXY RESINS FOR COMPOSITE
ADH version available in cartridges
AND MARINE APPLICATIONS
ADESIVI STRUTTURALI
ADH: versione disponibile in cartucce RESINE EPOSSIDICHE
PER MATERIALI COMPOSITI
ELANTAS Europe s.r.l.
E APPLICAZIONI
Strada Antolini, 1MARINE
Fraz. Lemignano
43044 Collecchio (PR) - Italy
FAST ASPECT MIX RATIO GELIFICATION SETTING TIME // Tg °C SHEAR APPLICATIONS/PROPERTIES RESIN HARDENER MIXING POT-LIFE CURING POST Tg °C APPLICATIONS/PROPERTIES
by WEIGHT TIME RECOMMENDED MAX STRENGTH Tel. +39 0521RATIO
304777(% weight) MIN 25°C TEMP. CURING Max
MIX RATIO (1 mm 25°C) CURING PROFILE (*) (N/mm2) RESINA INDURENTE RAPPORTO MIX TEMPO TEMP. POST APPLICAZIONI/PROPRIETÁ
SLOW by VOLUME minutes Fax +39 0521(%804410
in peso) DI UTILIZZO 25°C POLIMER. INDURIMENTO
2-COMPONENT SYSTEMS - COLD OR MODERATE TEMPERATURE CURING COLD TO HOT CURING WET-LAY UP
ELANTAS Europe GmbH Room
AS52/AW13 Fluid Aluminium, steel, plastic, composite fast repairing and bonding. W 341 8-15 min.
100:100 7 m. RT // 45 11-13 Alum 100:30
Großmannstr. 105 temperature (120°C) 125
(ADH52.13) Transparent 100:100 3 2h 25°C or more 11-13 Inox Riparazioni e incollaggi rapidi di alluminio, acciaio, compositi, fast react (100ml)
Lightly yellow plastici. 70°C
20539 Hamburg - Germany Short, medium, long, extra long pot-life,
7 h RT // Room
AS46/AW46 Lightly thixo 100:80 Universal adhesives with different viscosity for plastics, W 342 medium 100:30 22-27 min. thermal resistant, high performance system.
57 21-26 Alum temperature (120°C) 118
330 7 days RT or aluminium, steel, carbon composite and FRP part, wood, glass, react (100ml)
(ADH 46.46) Amber 100:100 21-26 Inox Tel + 49 40 789460 70°C W 342 UV resistant. W 132, W 131, W340
16h 40°C ceramic, and tooling board. are recommended for medium and large surface
7 h RT // Adesivi universali a diversa viscosità per incollaggi strutturali Room
AS90/AW42 Heavy thixo 100:80 EC 130LV W Fax
340 + 49 40 78946276 50-70 min. vacuum bag laminating.
70 30-37 Alum di alluminio, acciaio, legno, materiali compositi, vetro, ceramici, 100:30 temperature (120°C) 135
210 7 days RT or Light violet Slow react (100ml) Resina ad alte prestazioni termoresistente, con
(ADH90.42) Milky 100:100 17-21 Inox plastici, tavole lavorabili. 70°C
6h 60÷80°C indurenti a breve, medio, lungo, extra lungo pot-life.
Black, fatigue resistant structural Adhesive for carbon/alumi- Room
engineeringmaterials.elantas.europe@altana.com W 342 è resistente agli UV.
W 152 XLR 180-200 min.
slow react 100:30
Thixo 27-33 Alum nium/steel composite parts (car, bike, sporting goods). temperature (80°C) 103 W 132, W131, W 340 sono indicati per laminazione
4 h. RT // Extra
www.elantas.com/europe (100ml)
Black 100:45 70°C di medie e ampie superfici con sacco a vuoto.
80 27-33 Inox High thermal and chemical resistance.
AS89.1/AW89.2 Contrasting 100:50 135 2 h 80°C or 32-39 Carbon Incollaggio strutturale resistente alla fatica, di parti in composito
(ADH891.892) colours 5 h 50°C Room
fiber laminated carbonio/alluminio/acciaio, (auto, bici, moto, articoli sportivi). W 132 240-280 min.
Version 02/2018
100:38 temperature (80°C) 100
Elevata resistenza termica e chimica. ultra slow react (100ml) 70°C
AS90/AW90 AW 91
90 2,5 h RT 75 Fatigue resistant structural Adhesives whit different reactivities medium react Coupling layer between cured and wet lay-up
(ADH90.90) 10-14 min Room 75
Heavy Thixo for Wind blade, aircraft, boat hull, train part assembling AW 92 laminating (also on vinylester cured layer).
100:50 35-45 min temperature (70°C) 85
AS90/AW91 Lightly contr. (aluminium/ FRP/ honeycomb/ steel/ ceramic/ glass). extra slow react 65-80 min 70°C 82 Strato di collegamento tra laminati induriti
330 7 h RT 7 days e laminazione a umido (anche su vinilestere).
GL APPROVED
(ADH90.91) colours 100:45 25-30 Alum High chemical resistance. AW93
No sag till 10mm 100:50 RT or 26-31 Inox Adesivi strutturali resistenti alla fatica con differenti reattività Ultra slow react
AS90/AW92 GL Approved 5h70°C 80 per assemblaggio di pale eoliche, ultraleggeri, scafi
540 14 h RT Room
Systems (metalli/ FRP/ honeycomb/ ceramica /vetro). EC 152 W 152.1 HR 12-17 min.
100:30 temperature (70°C) 96
Elevata resistenza chimica. Pale yellow Fast react (200ml)
AS90/AW93 840 24 h RT 70°C High performance resin with short, medium, long,
Systems 35-45 Room extra long pot-life hardeners, for:
E Black or Grey structural epoxy adhesive for ski and Winter W 152.1 MR small pieces wet-lay-up laminating at R.T
1,5 h 60°C or 18-22 Alum GL Approved 100:30 min. temperature (70°C) 96
P Black or grey 210 / sports composites articles. Medium react medium and large surface vacuum bag laminating.
(200ml) 70°C
O AS94/AW94 SLOW castable 100:30 3 - 100 C° 30 m 80°C or 67 22-26 Inox Adesivo strutturale per sci e articoli sportivi. Disponibile nel Resina ad alte prestazioni con indurenti a breve,
X 15 m 100°C 4-6 ABS Room medio, lungo, extra lungo pot-life indicati
colore Nero e Grigio W152.1MLR 90-110 min.
Y 100:30 temperature (70°C) 96 per laminazione:
Clear epoxy-acrylate Adhesive for quick repairing and bonding Slow react (200ml)
20 m RT// 70°C di piccoli manufatti in ambiente di medie e ampie
AS95.1/AW95.1 Thixo 100:45 11-13 Alum for aluminium, steel, plastic, composite and tooling board.
5 24 h RT or 98 15,5-18,5 Room superfici con sacco a vuoto.
(ADH951.951) Transparent 100:50 Inox Adesivo epossi-acrilato per riparazioni e incollaggi rapidi W 152 XLR 100-120 min.
3h 50°C or more 100:30 temperature (70°C) 96
di alluminio, acciaio, compositi, plastici e tavole lavorabili extra slow react (200ml)
Filled Thixo Black
AS96.1/AW96.1 Contrasting 100:100 7
35 m RT//
24 h RT or 84 15,5-18,5 Alum Epoxy Resins and Structural
W152.1HR 14-20 min
70°C
Thixotropic resin, fast or extra long gelification,
(ADH961.961) colours 100:100 16-20 Inox
3 h 50°C or more
Epoxy-acrylate adhesives with different reactivities Adhesives
EC 255Tix
Fast react
for
100:24
Composite Materials
Room (70°C)
67 for bonding PVC foam core in sandwich laminating
structures.
AS97.1/AW96.1 Filled Thixo Black 1,5 h RT// Milky temperature Resina tissotropica, rapido o extra lunga gelificazione
100:100 86 15,5-18,5 Alum for repairing and bonding aluminium, steel, plastic, composite.
(ADH971.961) Contrasting 70 24 h RT or W152XLR per incollaggio anime in schiuma di PVC
100:100 20-24,5 Inox Adesivi epossi-acrilato per riparazioni e incollaggi rapidi 125-160 min 77
colours 3 h 50°C or more Extra slow react nelle strutture sandwich.
di alluminio, acciaio, compositi, plastici e tavole lavorabili ELANTAS Europe is part of the division ELANTAS of the ALTANA group
4 h RT// Chemical resistant wet lay-up epoxy system,
AS98/AW98 Filled Thixo 100:100 18-22 Alum
(ADH98.98) Beige 100:100 90 24 h RT or 78 24-28 Inox EC 170and is a Kleading
24 manufacturer of insulating
15-20 min. materials and specialty
Room for chemical product tank laminating.
3 h 50°C or more 100:14 temperature (60°C) 87
Thixotropic adhesive with separated filler for epoxy board
chemicals. Our portfolio includes wire enamels,
Pale yellow Medium react (100ml +50°C impregnating Sistema chimicoresistente per laminazione a umido
di layer di serbatoi nell’industria chimica.
Thixotropic 3,5 h RT/
COLDresins and varnishes, casting and potting resins, electronic coatings,
AS15/AW15 + Milky, filled with 100:15:20 110 24 h RT + 103 8-10 Alum bonding and sealing.
EF18T Adesivo tissotropico con carica a parte, per Incollaggio TO HOT CURING PRESS MOULDING – RTM
EF18T green 12 h 60°C or more e stuccatura di tavole epossidiche EC 396
adhesives and
W 153
flexible electrical insulation materials.
Room In addition, we
100: 32 6-8 min temperature (80°C) 98
Filled Heavy thixo 2 h RT// Structural Adhesives for pultruded part, metal, ceramic and glass. supply materials for other application areas such
Pale yellow Fast react 15 min.as special
80°C coatings,
AS50/AW50 Dark grey 100:50 105 14-18 Alum Low thermal expansion coefficient, good thermal conductivity.
(ADH50.50) Contrasting 100:50 60 7 days RT 18-22 Inox High chemical and thermal resistance. printed electronic
W 152.1HR
products as well as tooling and Roomcomposite materials.
or 6h 60÷80°C 100: 30 8-10 min temperature (80°C) 98
colours AS60/AW60 withstand 150°C. Fast react Fast or long pot-life systems with high reactivity,for
Filled Heavy thixo Incollaggi strutturali di elementi pultrusi, SMC, metalli, ceramica As
EC 114 a specialist in formulating epoxy, polyurethane100°C and silicone hot press or RTM moulding (ex.helmets, fins, wakeboards,
Dark grey 100:50 2,5 40 C°// 15hRT + 135 14-18 Alum e vetro. Basso coefficiente di dilatazione, buona conducibilità Pale yellow
resins ELANTAS Europe has a deep knowledge in composite material snowboards, bike and automotive parts, etc).
90 termica, elevata resistenza termica e chimica. W 340 80-100 min
AS60/AW60 Contrasting 100:50 3h 130°C 15-19 Inox 100:27 --/ 100°C 100-130°C 150 Sistemi a rapido o lungo pot-life per stampaggio
Medium react
colours AS60/AW60 può operare fino a T. di 150°C. development and applications. (8Withmin. 80°C)
our brand Elan-tech® we are a pressa o RTM, con elevata reattività a caldo
Filled adhesives PU for Aluminium and phenolic laminate sheet offering Wa557broad assortment of20-30
high-performance
Room products for a (es. per caschi, pinne, wakeboards, snowboards, parti
13,5-16,5 Alum of honeycomb panels, thermoplastic, FRP, tooling board EC 157.1 100:18 min temperature (120°C) 100 di moto e autovetture, ecc).
Filled PU liquid n.a. Pale yellow Fast react (100ml)
variety of composite application processes. In100°C addition, our portfolio
P PC200/G8 100:25 240 6 h RT// 1-2 days RT 6,5-7,5 Inox bonding. Fluid and thissotropic type.
PC200DT/G200 Neutral milky
O 100:25 90 3 h RT// 1-2 days RT n.a. 3,5-4,5 ABS Adesivi PU caricati, versione fluida e tissotropica (DT), per
L
Thixotropic 5-7 PVC incollaggi di alluminio e laminati fenolici di pannelli honeycomb, includes Wstructural
340 adhesives and sealants for -/ 30 a
minrapid 100-170°C
bonding of
EC 201 100:32 320-360 min 198
Y termoplastici, vetroresina, tavole lavorabili compatte. composite Medium
andreact
other materials. 100°C
U ADH PU 3005 Three type of sealant adhesives PU, flexible ShoreA85,
R -10 6-8 PVC COLD CURING + POST CURING INFUSION
flexible low module Shore D60, rigid Shore D85 for fast repairing
E 6-8 PA W152.1 HR
translucent and bonding thermoplastic, FRP and many other materials 40-50 min.
T ADH PU 6005 10-12 Alum (available in cartridge with static mixer and manual dispenser accelerator 85
Unfilled PU very (200 ml) Very low viscosity with several reactivity.
H low module 15 m. RT // 50 7-8 ABS for 50 ml, 200 ml, 400 ml) Fast react
A tixotropic 100:100 6 EC 157.1 Suitable for small and large infusion component
translucent 8 h RT 8-10 SMC Tre tipi di adesivi sigillanti PU, flessibile Shore A85, basso
N modulo Shore D60, rigido Shore D85, adatti per riparazioni ra- Pale yellow W152.1MLR 80-100 min. Room (70°C) (i.e. wind turbine blades and boats).
85 Sistema a bassissima viscosità e diverse reattività.
E 11-14 Alum pide e incollaggi strutturali di termoplastici, vetroresina e molti Slow react 100:30 (200ml) temperature
ADH PU 8505 Systems 50°C Specifico per l’infusione di parti di piccole e grandi
55 10-12 Inox altri materiali (disponibili in cartucce da 50 ml, 200 ml, 400 ml
rigid black GL Approved dimensioni (es.pale eoliche, barche).
13-15 FRP con mixer statico e erogatore manuale). W 152 XLR 120-150 min. 85
Extra slow react (100ml)
(*) The recommended curing profile refers to the maximum adhesive properties. For different curing cycles refers to data sheets.
RESIN HARDENER MIXING POT-LIFE CURING POST Tg °C APPLICATIONS/PROPERTIES RESIN HARDENER ACCELERATOR MIXING POT LIFE HOT Tg °C APPLICATIONS/PROPERTIES
RATIO (% weight) MIN 25°C TEMP. CURING Max RATIO (% weight) at 25°C CURING Max
RESINA INDURENTE RAPPORTO MIX TEMPO TEMP. POST APPLICAZIONI/PROPRIETÁ RESINA INDURENTE CATALIZZATORE RAPPORTO MIX TEMPO UTILE INDURIMENTO APPLICAZIONI/PROPRIETÁ
(% in peso) DI UTILIZZO 25°C POLIMER. INDURIMENTO (% in peso) a 25°C A CALDO
COLD CURING MAINTENANCE AND CASTING HOT CURING PULTRUSION/FILAMENT WINDING CASTING (*)
EC 147 100:45 Room temperature fast curing system. Easy mixing ratio 2:1 Long pot-life System curing at moderate
For putty add: 65 in volume. EC398Tix/W147 is a light thixotropic system. temperature. Filament Winding for small-medium
Pale yellow W 147 12-20 min. Room
EF 36 (50°C) Rapido indurimento a T. ambiente. Facile rapporto di EC 114 W 132 size composite parts.
Amine slow react n.a.
EC 398 Tix Fast react (100 ml) temperature 100:37 400-460 min 90°c 110
EF18T 75 impiego 2:1 in volume. EC398Tix/W147 è leggermente Pale yellow Sistema a lungo pot-life con indurimento
Pale yellow tix EF 31 tissotropico. a moderata temperature. Avvolgimento filamentare
di manufatti piccole e medie dimensioni.
W 160 100:30 70-85 min. 80 Long pot-life Systems. High temperature curing
Fast, medium or Long pot-life System developed in order only, reactivity depending on % accelerator. F.W.,
EC 360 W 161HR Room to receive a higher amount of charges. WH 850.1
100: 25 10-20 min. (50°C) 85 EC 01 W 45 or W847 press molding.
Anidryde Pale yellow /brown 100:90:0,5÷2
Pale yellow Fast react temperature Sistema a medio o lungo pot-life sviluppato per ricevere 6-24 h 100-160°C 130
Pale yellow
hardener Sistemi a lungo pot-life con indurimento solo
W 222 180-300 min. una più alta quantità di cariche. a caldo, con reattività dipendente dalla %
100:45 63
Extra slow react di catalizzatore. Processi F.W., pressatura a caldo.
EC 251 30-40 min. -8 U.V. protected low viscosity, transparent, flexible As above, specific for high curing filled Systems
Flexible (100ml) (EC 251) and low module (EC252) Systems. WH 850.1 (abrasive tools for stone and ceramic slabs)
Room EC 361 W 45
EC 252 W 242NF 100:40 temperature (60°C) For glass slab coupling layer and agglomerated materials. Pale yellow
Anidryde Pale yellow 100:85:1,5÷2 6-24 h 100-150°C 130 Come sopra ma specifico per Sistemi
Low module Medium react 25-40 min. +50°C Sistema con protezione U.V., trasparente, flessibile hardener con indurimento a caldo, molto caricati (utensili
40 (EC251) e basso modulo (EC252), per strati abrasive per lapidei e ceramico).
Transparent (500ml)
UV protecte di collegamento su vetro e materiali agglomerati. WH 102 W 45 or W847
Anidryde
W 242NF 100:45 35-45 min. Room (50°C) 58 U.V. protected low viscosity, clear casting System. EC 14PT Pale yellow/brown 100:90:0,5÷2 5-15 min 160-
Medium react temperature hardener Long pot life system. High temperature curing only.
EC 141 NF Different hardeners, for transparent and agglomerated Milk, 6-24 h 190°C 150
Transparent
W 243 100:40 40-60 min. Room (50°C) 70 piece and coating. with release agent WH 113 + post-curing Containing wax releasing additive for high speed
Slow react (200ml) temperature Sistema con protezione U.V., trasparente, a bassa visco- Anidryde hardener - 100:90 pultrusion composite parts.
UV protected accelerated Sistema a lungo pot-life con Indurimento solo
W 241 Room sità, differenti indurenti per manufatti colati similvetro,
100:45 75-95 min. (50°C) 65 agglomerati e finiture. ad alta T, contenente cera distaccante per
Extra slow react temperature MC 103 WH113 5-15 min 160- pultrusione ad alta velocità di parti in composito.
U.V. protected low viscosity System, for carbon look Light filled Anidryde hardener - 100:77 6-8 h 190°C 120
Room acelerated + post-curing
EC 254LB W 254N 100:50 15-25 min. temperature (60°C) 87 composites coating and materials finishing. with release agent
UV protected Medium-fast react (100ml) +50°C Sistema per finitura trasparente di manufatti compositi
a vista di carbonio ed altri materiali. Very low viscosity and long pot-life system. High
temperature curing only.
AS 15 W 242NF 5-15 70 Thixotropic casting resin, foaming up to 2-5 times Filament Winding and press moulding for high
milky Medium react Room for small or large light elements EC 327 WH 102 W 45 or W847 80°C+140°C thermal resistant composite part.
100: 0,5-1,5: 45 (50°C)
Pale yellow/brown 100:115:1,5-3
+ Y 28 W 241 temperature Sistema da colata tissotropico, espandente da 2 a 5 6-24 h 200
15-30 70 Pale yellow Pale yellow +180°C Sistemi a bassissima viscosità, Lungo pot-life
foaming Agent Slow react volte per piccoli o grandi elementi leggeri. con indurimento solo ad alta T.
PC224 GLASS MR U.V. resistant aliphatic PU System for solid casting Filament winding e stampaggio sotto pressa
Transparent G124 25-35 min. Room maximum thickness 40 mm. di parti in composito ad alta resistenza termica.
100:65 (50°C) 83
aliphatic System transparent (500ml) temperature Sistema poliuretanico alifatico, resistente U.V. per colate
PU, UV resistant a spessore massimo 40 mm. (*) Other Systems available for specific needs (i.e. different reactivity) – Altri Sistemi sono disponibili per specifiche necessità (es. differente reattività)
COLD CURING + POST CURING MASTER MODELS AND TOOLS FOR COMPOSITES U.V. CURE RESIN WITH SPECIAL LAMP AND ANCILLARY PRODUCTS RESINA INDURENTE CON LAMPADA U.V. E ACCESSORI
EPOXY BOARD d=650 Master models and thermoresistant tools for epoxy CLEAR FINISH RETOUCH RITOCCO DI FINITURE TRASPARENTI
* standard size : 1500x500x100/75/50mm. pre-pregs tools and parts.
EPIBLOCK EB 690 GREEN 135
TAVOLA EPOSSIDICA d=650 Modelli master e stampi termoreisistenti per pre-pregs
*dimensione standard 1500x500x100/75/50 mm. epossidici.
PURBLOCK Many density UV cure system complete with lamp, protected
Polyurethane boards for modeling and tools 80-90 Refer to “Tooling Resins Overview”
RANGE and colours resin cartridge DYMAX, ancillary products for fast
Machine applied several epoxy pastes (d=0,6-0,7-0,75) DYMAX retouch of transparent surfaces finish and carbon
MS 655 A MS 655 B SYSTEM look composite.
MS 657 A 68 for CNC large model and mould.
MS 657 B 35 - 45 min. Room Sistema completo composto da lampada U.V.
MS 658 A 100:100 (60°C) 68 Diverse paste epossidiche (d=0,6-0,7-0,75) estrudibile
MS 658 B (500ml) temperature SISTEMA e cartucce di resina protetta DYMAX per il ritocco
63 a macchina mix-dos per modelli e stampi di media e
Grey or brown White DYMAX rapido di superficia finitura trasparente quali
grande dimensione.
i manufatti in materiale composito con fibra
High thermal and chemical resistant, aluminium filled, di carbonio a vista.
Grey Aluminium 100:7 120-180 for solid casting of pilot thermoplastic injection moulds.
MC 338 W 61 40 240
Grigio Alluminio Elevata resistenza termica e chimica, caricato alluminio, per
colate a spessore di stampi pilota per iniezione termoplastici.
W 341 25 - 35 min. Room Aluminium filled thermal conductive system for mould
100:9 100-130°C 133
MC 1164 Fast react (200ml) temperature casting. Special additive compatibilizer gelcoat or polye-
filled Alu W 340 150 - 180 min. Room Sistemi caricati alluminio termoconduttivi ster/vinylester skin coat with epoxy resins. Please
100:9 100-130°C 135 per stampi colati. For gelcoat or
Medium react (200ml) temperature
polyester/ vinyle- Transparent check TDS.
ADD-UP2 100:1,8-2,2 - -
W 503 15 – 25 min. Room temperature 130°C Trasparente - Speciale additivo compatibilizzante gelcoat e
100: 19 150 Polishable gelcoat, fast or long pot-life, room temp. ster resins resine poliesteri/vinilesteri skin coat con resine
MG 536 Fast react (100 ml) /40°C curing, for thermal resistant. moulds and tools.
brown W 506 Room temperature 160°C Gelcoat lucidabile a corto o lungo pot-life, per stampi epossidiche. Vedi procedura sul B.T.
100:33 182 min 190 e attrezzi ad alta resistenza termica.
Slow react /40°C
EC 57 Room Long pot-life System for thermoresistant tools, infusion processed.
W 61 68- 82 min.
100:16 temperature 120°C 140 Sistema a lungo pot-life per stampi termoresistenti
Pale yellow Slow react (100ml) +50°C realizzati per infusione.
Room Long pot-life System for thermoresistant tools, infusion processed.
EC 257 W 61 220 – 240 min
Pale yellow Slow react 100:16 (200 ml) temperature 160°C 190 Sistema a lungo pot-life per stampi termoresistenti
+35°C realizzati per infusione.
Long pot-life, Room temp. curing System, for thermal
W340 Room
EC 180 220 – 240 min resistant. moulds and tools. Wet lay-up processed.
Medium-slow 100:36 temperature 160°C 185
Amber
react (100 ml) + 35°C Sistema a lungo pot-life per laminazione manuale, induri-
mento a T.A. per stampi e attrezzi alta resistenza termica.
ELANTAS Europe s.r.l.
Strada Antolini, 1
Fraz. Lemignano
43044 Collecchio (PR) - Italy
Tel. +39 0521 304777
Fax +39 0521 804410
ELANTAS Europe GmbH
Großmannstr. 105
20539 Hamburg - Germany
Tel + 49 40 789460
Fax + 49 40 78946276
engineeringmaterials.elantas.europe@altana.com
www.elantas.com/europe
Version 02/2018
Epoxy Resins and Structural
Adhesives for Composite Materials
ELANTAS Europe is part of the division ELANTAS of the ALTANA group
and is a leading manufacturer of insulating materials and specialty
chemicals. Our portfolio includes wire enamels, impregnating
resins and varnishes, casting and potting resins, electronic coatings,
adhesives and flexible electrical insulation materials. In addition, we
supply materials for other application areas such as special coatings,
printed electronic products as well as tooling and composite materials.
As a specialist in formulating epoxy, polyurethane and silicone
resins ELANTAS Europe has a deep knowledge in composite material
development and applications. With our brand Elan-tech® we are
offering a broad assortment of high-performance products for a
variety of composite application processes. In addition, our portfolio
includes structural adhesives and sealants for a rapid bonding of
composite and other materials.
You can also read
