LIGHT CONTROL Our product spectrum for - RESI.cc
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Our product spectrum for
LIGHT
CONTROL
RESI Informatik & Automation GmbH, Altenmarkt 29, A-8551 Wies, AUSTRIA
www.RESI.cc, sales@RESI.cc, Phone: +43-316-262062-0, Fax: +43-316-262062-66
LIGHT CONTROL INTRODUCTION
LIGHT IN EVERYDAY LIFE INTEGRATION OF STANDARDS
Light is life. Life would not be possible without light By integrating widespread standards, we are open
and photosynthesis. Due to our progressing to many products from other manufacturers.
industrialization, our main location is moving more Currently we support:
and more into buildings. We are cut off from the
natural light source sun. Artificial light now has the DALI1.0
task of replacing the lack of sunlight. On the one DALI2.0
hand, this can be solved by means of appropriate DMX
light sources, but it also increasingly requires KNX/EIB
intelligent light control. ENOCEAN
MODBUS
RESI offers the following solutions: SMI
Time-controlled light areas OUR LED SYSTEMS
Presence-dependent lighting control
Daylight control We offer our own lights and ballasts for the use of
Light color control LED strips. The aim of these products is a simple
Combined lighting and shading controls and quick integration of these modern lighting
Constant light regulations solutions.
OUR LIGHTING PRODUCTS Also we offer special controllers for LED stripes,
where you can control every RGB LED individually.
We have developed and positioned our light This solution is designed for effect lights.
controllers and control units for precisely this
market. Our diverse spectrum covers everything SHADES & BLINDS
from simple lighting applications to complex lighting
controls. For the control of shades & blinds we offer special
IO modules. We also support SMI standard or KNX
OUR CONTROL UNITS & TOUCH PANELS IO modules.
With our control elements for wall installation (flush INTEGRATION IN HVAC
mounting), light scenarios and lighting groups can
be easily switched and controlled. The aim of these Furthermore we offer a complete range of control
devices is the simple operation of our lighting products for heating, cooling and ventilation control
solutions. With our touch panels we offer a cost (HVAC). Our lighting solution is seamlessly
effective solution to control complex light embedded in this solution!
installations from one point. We offer classic PIR
presence detectors and special IR sensors for CODESYS® IEC1131 SOFTWARE
advanced presence detection.
Our controllers & touch panels are programmable
NETWORKING with the well known standard software
CODESYS®.
Our light controllers work completely
autonomously. This increases the security against LINUX BASED SOFTWARE
failures enormously. Thanks to the integrated
Ethernet interface, data can be exchanged We promote our controllers with a standard LINUX
immediately between the controllers. This means, distribution. This enables our customers to
that everything from small systems to complex implement your own software on our controllers &
lighting control systems can be implemented and touch panels.
all relevant light control data is available to the
facility management or building control center. RESI SOFTWARE
We developed a complete control technology for
operating and monitoring lighting solutions.
In addition to our 2D control center
RESI.SCADA.2D, we particularly refer to our
innovative 3D control center RESI.SCADA.3D.
More information on the Internet at www.RESI.cc
LIGHT CONTROL SOFTWARE
UP TO 70% ENERGY SAVINGS DAYLIGHT SIMULATION
With our modern lighting control solutions you can Natural daylight and its dynamics in relation to the
save up to 70% in energy and costs. Our light color is the basis of our life. Evolution has
innovative control centers based on optimally adapted humans to the changing
RESI.SCADA.3D optimally support the operation conditions caused by the sun and seasons.
and parameterization of the light controls and
enable a unique overview of your property! Modern people spend a large part of their lives in
artificially illuminated rooms. In order to achieve a
RESI.SCADA.3D CONTROL CENTER better well-being here, the daylight simulation is
dedicated to the imperceptible adjustment of the
With our 3D control center, we deliver an innovative light color and lighting conditions in the interior. The
control center for the central switching and course of the sun in the current season is
management of all light points in a building simulated. This has been shown to increase
complex or an infrastructure system. concentration and quality of life.
LIGHT DIMMING
Energy
100%
80%
60%
40%
20%
06:00 12:00 18:00
Zeit
TIME BASED CONTROL
Energy
100%
80%
60%
40%
20%
06:00 12:00 18:00
Zeit
PRESENCE CONTROL
Energy
100%
80%
60%
40%
20%
COLOR TEMPERATURE + BRIGHTNESS 06:00 12:00 18:00
CONTROL Zeit
Increased well-being through automatic regulation DAY LIGHT
of the color temperature and brightness of the
Energy
lighting. 100%
80%
60%
40%
20%
06:00 12:00 18:00
Zeit
DAY LIGHT+PRESENCE
Energy
100%
80%
60%
40%
20%
06:00 12:00 18:00
Zeit
LIGHT CONTROL SOLUTIONS RGB EFFECT LIGHTS RESI LIGHT PANELS Design your real estate with our LED-based RGB We manufacture light panels for indoor and outdoor lighting solutions and lights. Set color accents in advertising. These are illuminated all around with the outdoor area, in the foyers and lobbies, in the LED strips. Advertising foils for illuminated signs corridors, in the sanitary areas or in your offices can also be attached to the light panels. and in your private areas. Integrate DALI1.0, DALI2.0 Lamps into your solution or use our DMX controllers to control DMX lamps as part of your solution. RESI.LED LIGHT STRIPS Our LED light strips impress with the most modern, cost-efficient LED strips equipped with one or more mono colors, dual colors or RGB LEDs. The light strips can be controlled ON/OFF or dimmable. Our LED systems are for applications in the basement, stairwells and corridors, damp rooms, fountains, parks, outdoors etc.
LIGHT CONTROL SOLUTIONS
RESI MEETING ROOM SYSTEMS RESI SHOP LIGHT CONTROL
We also control every aspect of meeting rooms We manufacture IoT controller solutions especially
with our control systems: light, blinds, shades, for shop control. We do not only control the local
temperature or air quality. We integrate the light scenes, we can also monitor the energy
multimedia equipment in the room into our consumption and other relevant data of every shop.
solutions too.
RESI WAY +INFORMATION SYSTEMS
Static information boards are needed in the public
area or in public buildings to help you find your way
and for orientation. We manufacture such systems
from glass+stainless steel, which are additionally
illuminated by LEDs and can be remotely controlled
via our control center software and our IoT
controllers.
Raspberry© Pi® RESI-T8-x controller
POWERFUL LINUX &
CODESYS® IEC 1131
CONTROLLERS
Industrial grade Raspberry© Pi® 3 Model B+ based controllers with
3 serial interfaces (RS232 or RS485), a 12..48Vdc power supply and
an integrated buffered real time clock.
Ideal basis for your own applications based on LINUX.
Preinstalled CODESYS® run-time license (Single Core or Multi Core)
to start directly with the IEC 1131 programming on the device.
RESI-T8-A
Raspberry© Pi® 3 Model B+ based
SD CARD with RASPIAN® LINUX
3xUSB2.0
Integrated real time clock
12..48Vdc power supply
3xRS485
RESI-T8-B
like RESI-T8-A, but
1xRS232 and 2xRS485
RESI-T8-C
like RESI-T8-A, but
2xRS232 and 1xRS485
RESI-T8-D
like RESI-T8-A, but
3xRS232
RESI-T8-x-CS
like RESI-T8-x, but with
CODESYS® single core run-time preinstalled
RESI-T8-x-CM
like RESI-T8-x, but with
CODESYS® multi core run-time preinstalled
Raspberry© Pi® RESI-T1-x LINUX controller
POWERFUL LINUX &
CODESYS® IEC 1131
CONTROLLERS
Industrial grade Raspberry© Pi® Compute Module 3+ based
controller with 1 serial interfaces (RS485), a 12..48Vdc power supply
and an integrated buffered real time clock.
Versions with integrated UMTS or LTE-M1 modem allow direct
communication with CLOUD.
Ideal basis for your own applications based on LINUX.
Preinstalled CODESYS® run-time license (Single Core or Multi Core)
to start directly with the IEC 1131 programming on the device.
RESI-T1-A
Raspberry© Pi® Compute Module 3+ based
32GB FLASH with RASPIAN® LINUX
2xUSB2.0
integrated DIP switch for system settings
3 status LEDs for user info
Integrated real time clock
12..48Vdc power supply
1xRS485
RESI-T1-B
like RESI-T1-A but with
integrated LTE-M1 modem
RESI-T1-C
like RESI-T1-A but with
integrated UMTS modem
RESI-T1-x-CS
like RESI-T1-x, but with
CODESYS® single core run-time preinstalled
RESI-T1-x-CM
like RESI-T1-x, but with
CODESYS® multi core run-time preinstalled
Raspberry© Pi® RESI-V7H-x touch panel
POWERFUL LINUX &
CODESYS® IEC 1131
TOUCH PANELS
Industrial grade Raspberry© Pi® 3 Model B+ based touch panel with
7" touch panel (800x480) and 1xRS232, a 12..48Vdc power supply, an
integrated buffered real time clock, and an integrated temperature
and proximity sensor.
We offer various designs and materials of the front plate and
individual logo engraving.
Ideal basis for your own applications based on LINUX.
Preinstalled CODESYS® run-time license (Single Core or Multi Core)
to start directly with the IEC 1131 programming on the device.
RESI-V7H-A
Raspberry© Pi® 3 Model B+ based
SD CARD with RASPIAN® LINUX
3xUSB2.0
7" touch panel 800x480
Integrated real time clock
12..48Vdc power supply
1xRS232
Integrated proximity and temperature sensor
RESI-V7H-B
like RESI-V7H-A, but
No sensors
RESI-V7H-x-CS
like RESI-V7H-x, but with
CODESYS® single core run-time preinstalled
RESI-V7H-x-CM
like RESI-V7H-x, but with
CODESYS® multi core run-time preinstalled
Raspberry© Pi® RESI-V7V-x touch panel
POWERFUL LINUX &
CODESYS® IEC1131
TOUCH PANELS
Industrial grade Raspberry© Pi® 3 Model B+ based touch panel with
7" touch panel (800x480) and 1xRS232, a 12..48Vdc power supply, an
integrated buffered real time clock, and an integrated temperature
and proximity sensor.
We offer various designs and materials of the front plate and
individual logo engraving.
Ideal basis for your own applications based on LINUX.
Preinstalled CODESYS® run-time license (Single Core or Multi Core)
to start directly with the IEC 1131 programming on the device.
RESI-V7V-A
Raspberry© Pi® 3 Model B+ based
SD CARD with RASPIAN® LINUX
3xUSB2.0
7" touch panel 800x480
Integrated real time clock
12..48Vdc power supply
1xRS232
Integrated proximity and temperature sensor
RESI-V7V-B
like RESI-V7V-A, but
No sensors
RESI-V7V-x-CS
like RESI-V7V-x, but with
CODESYS® single core run-time preinstalled
RESI-V7V-x-CM
like RESI-V7V-x, but with
CODESYS® multi core run-time preinstalled
ROOM CONTROL UNITS
CU1: Control unit one
Control unit with three illuminated push buttons, two
potentiometers. Illuminated frame with RGB LEDs.
We offer various designs and materials of the front plate and
individual logo and text engraving.
Different bus versions: RS485 (MODBUS or ASCII), KNX or DALI.
Models with integrated temperature or air quality sensor.
Suitable for GIRA®, BERKER®, SIEMENS®, LEGRAND® or JUNG®
frames.
In-wall mounting in standard wall mount box.
RESI-RC-CU1-xx
Control unit with 3 push buttons+3 LEDs
LED colors:RED, YELLOW; GREEN, BLUE, WHITE
2 potentiometers 0..100%
RGB LEDs for frame illumination
Optional Integrated temperature sensor
Optional Integrated air quality sensor
Bus interface:RS485, KNX or DALI
individual materials and designs
Custom cover plate text engraving
Suitable for almost all frames on the market
In-wall mounting
Please ask for more details about this productROOM CONTROL UNITS
CU2: Control unit two
Control unit with six illuminated push buttons.
Illuminated frame with RGB LEDs.
We offer various designs and materials of the front plate and
individual logo and text engraving.
Different bus versions: RS485 (MODBUS or ASCII), KNX or DALI.
Models with integrated temperature or air quality sensor.
Suitable for GIRA®, BERKER®, SIEMENS®, LEGRAND® or JUNG®
frames.
In-wall mounting in standard wall mount box.
RESI-RC-CU2-xx
Control unit with 6 push buttons+6 LEDs
LED colors:RED, YELLOW; GREEN, BLUE, WHITE
RGB LEDs for frame illumination
Optional Integrated temperature sensor
Optional Integrated air quality sensor
Bus interface:RS485, KNX or DALI
individual materials and designs
Custom cover plate text engraving
Suitable for almost all frames on the market
In-wall mounting
Please ask for more details about this productROOM SENSOR UNITS
MD1: Motion detector 1
Sensor unit with PIR element for motion detection and integrated
brightness sensor.
Illuminated frame with RGB LEDs.
We offer various designs and materials of the front plate and
individual logo and text engraving.
Different bus versions: RS485 (MODBUS or ASCII), KNX or DALI.
Models with integrated temperature or air quality sensor.
Suitable for GIRA®, BERKER®, SIEMENS®, LEGRAND® or JUNG®
frames.
In-wall mounting in standard wall mount box.
RESI-RS-MD1-xx
Sensor unit with PIR element for motion detection
Integrated brightness sensor
RGB LEDs for frame illumination
Optional Integrated temperature sensor
Optional Integrated air quality sensor
Bus interface:RS485, KNX or DALI
individual materials and designs
Custom cover plate text engraving
Suitable for almost all frames on the market
In-wall mounting
Please ask for more details about this productLIGHT LED STRIPE CONTROLLER
CONTROL LED STRIPES
Control mono color, bi color, RGB or RGBW LED stripes.
IO modules to control LED stripes with PWM signal.
Suitable for constant voltage LED stripes up to 60Vdc.
Maximum power supply per PWM channelLIGHT LIGHT IO MODULES
LIGHT SWITCHING MODULES
Switch light directly without additional relays or contactors.
8 bistable relay with manual override.
Output power per channel:
Incandescent lamp 4.800 W
Fluorescent lamp not compensated 5.000 W
Fluorescent lamp parallel compensated 2.500 W / 200 µF
Fluorescent lamp duo-combination 2 x 5.000 W
Halogen lamp (230VAC) 5.000 W
Low voltage halogen lamp with transformer 2.000 VA
Mercury arc sodium discharge lamp not compensated 5.000 W
Mercury arc sodium discharge lamp parallel compensated 5.000 W / 200 µF
Dulux lamp not compensated 4.000 W
Dulux lamp parallel compensated 3.000 W / 200 µF
Optional 16 digital inputs for push buttons or switches.
Integrated configurable logic functions for stand alone applications.
RS485 interface with MODBUS/RTU slave or ASCII protocol.
RESI-S8RO-SIO
Module with 8 bistable relays especially for light switching
Contact rating: max. 250Vac, 16A, 200µF
MODBUS protocol or ASCII text commands
RS485 interface
RESI-S16DI8RO-SIO
like RESI-S8RO-SIO, but with additional 16 digital inputs for 12-
48Vdc signals of local switches or push buttons
Configurable internal logic functions for mapping digital inputs to
relay outputs
Stand alone functionalityLIGHT LIGHT IO MODULES
LIGHT SWITCHING MODULES
Switch light directly without additional relays or contactors.
8 bistable relay with manual override.
Output power per channel:
Incandescent lamp 4.800 W
Fluorescent lamp not compensated 5.000 W
Fluorescent lamp parallel compensated 2.500 W / 200 µF
Fluorescent lamp duo-combination 2 x 5.000 W
Halogen lamp (230VAC) 5.000 W
Low voltage halogen lamp with transformer 2.000 VA
Mercury arc sodium discharge lamp not compensated 5.000 W
Mercury arc sodium discharge lamp parallel compensated 5.000 W / 200 µF
Dulux lamp not compensated 4.000 W
Dulux lamp parallel compensated 3.000 W / 200 µF
Optional 16 digital inputs for push buttons or switches.
Integrated configurable logic functions for stand alone applications.
RS485 interface with MODBUS/RTU slave or ASCII protocol.
RESI-8RO-SIO
Module with 8 bistable relays especially for light switching
Contact rating: max. 250Vac, 16A, 200µF
MODBUS protocol or ASCII text commands
RS485 interface
RESI-16RI8RO-SIO
like RESI-S8RO-SIO, but with addition 16 digital inputs for 20-
250Vac/dc for local switches or push buttons
Configurable internal logic functions for mapping digital inputs to
relay outputs
Stand alone functionalityLIGHT SHADES & BLINDS IO MODULES
MODULES FOR SHADES & BLIND
CONTROL
Eight channel time based positioning of shades and blinds.
Control of the position of the shades/blinds and of the slats.
Integrated wind and rain alarm functionality.
Configurable grouping of shades/blinds.
Optional 20 digital inputs for AC/DC signals of push buttons for local
control of shades & blinds.
RS485 interface with MODBUS/RTU slave or ASCII protocol.
RESI-4SB-SIO
●
Module with 8 relays especially for shades & blind control
●
Contact rating: max. 250Vac, 8A
●
MODBUS protocol or ASCII text commands
●
RS485 interface
RESI-10RI4SB-SIO
●
like RESI-4SB-SIO, but with additional 10 digital inputs for 12-
250Vac/dc for local push buttons
●
Configurable internal logic functions for mapping digital inputs to
shades/blinds
●
Stand alone functionality
RESI-8SB-SIO
Module with 16 relays especially for shades & blind control
Contact rating: max. 250Vac, 8A
MODBUS protocol or ASCII text commands
RS485 interface
RESI-20RI8SB-SIO
like RESI-8SB-SIO, but with additional 20 digital inputs for 12-
250Vac/dc for local push buttons
Configurable internal logic functions for mapping digital inputs to
shades/blinds
Stand alone functionalityLIGHT KNX INTEGRATION
GATEWAYS FOR KNX INTEGRATION
Our gateways enable you to integrate and control a KNX network.
You can send and receive KNX group telegrams.
The complete mapping between KNX data formats and MODBUS
register formats will be done internally.
RESI-KNX-PS
●
Power supply from 12-48Vdc to KNX, max. 160mA
RESI-KNX-SIO
●
Gateway between KNX and MODBUS/RTU or ASCII
●
Gateway is MODBUS/RTU or ASCII slave
●
Internal mapping of KNX groups to MODBUS registers
●
RS232 or RS485 interface
RESI-KNX-ETH
like RESI-KNX-SIO, but with Ethernet interface and MODBUS/TCP
server protocol
RESI-KNX-GW
Transparent ASCII Gateway between KNX and host
RS232 or RS485 interface
RESI-KNXGW-ETH
Like RESI-KNX-GW, but with Ethernet interface
RESI-KNX-MBMASTER
Gateway with MODBUS/RTU master functionality to integrate
devices with MODBUS/RTU slave protocol into a KNX system
RS232 or RS485 interface for MODBUS/RTU masterLIGHT DALI LIGHT CONTROL
GATEWAYS FOR DALI1.0+DALI2.0
LIGHT SYSTEMS
Our gateways enable you to integrate and control a DALI light
system.
The modules support all DALI 1.0 and DALI 2.0 commands.
DALI multi master telegrams are also supported.
RESI-DALI-PS
●
Power supply from 12-48Vdc to DALI, max. 200mA
RESI-DALI-SIO
●
Gateway between DALI1.0,DALI2.0 and MODBUS/RTU or ASCII
●
Gateway is MODBUS/RTU or ASCII slave
●
All DALI 1.0 and DALI 2.0 commands are supported
●
DALI multi master handling is supported
●
RS232 or RS485 interface
RESI-DALI-ETH
like RESI-DALI-SIO, but with Ethernet interface and MODBUS/TCP
server protocolLIGHT DMX LIGHT CONTROL
GATEWAYS FOR DMX512
LIGHT SYSTEMS
Our gateways enable you to integrate and control DMX lamps.
The module acts as a DMX512 master with adjustable frame refresh
rate and frame length.
Transparent mapping between 512 MODBUS registers and 512 DMX
registers.
RESI-DMX-SIO
●
Gateway between DMX and MODBUS/RTU or ASCII
●
Gateway is MODBUS/RTU or ASCII slave
●
Gateway acts as a DMX512 master
●
Adjustable DMX frame refresh rate between 5ms and 10s
●
Adjustable DMX frame length between 1 and 512 bytes
●
RS232 or RS485 interface
RESI-DMX-ETH
like RESI-DMX-SIO, but with Ethernet interface and MODBUS/TCP
server protocolLIGHT ENOCEAN INTEGRATION
GATEWAYS FOR ENOCEAN
RADIO DEVICES
Our gateways enable you to integrate ENOCEAN radio devices like
push buttons or sensors into your system.
Transparent version with ENOCEAN ESP3® protocol.
Extensive internal mapping between MODBUS registers and
ENOCEAN telegrams, so no further conversation in host software is
needed.
RESI-ENO-SIO
●
Gateway between ENCOEAN radio devices and
●
MODBUS/RTU or ASCII
●
Gateway is MODBUS/RTU or ASCII slave
●
Internal mapping from ENOCEAN data types to
MODBUS data types
●
RS232 or RS485 interface
RESI-ENO-ETH
●
Like RESI-ENO-SIO but with Ethernet interface
RESI-ENO-GW
●
Transparent gateway between ENOCEAN radio devices
and controllers with RS232 or RS485 interface
●
Protocol on serial line: ENOCEAN® ESP3® protocol
RESI-ENOGW-ETH
●
Like RESI-ENO-GW but with Ethernet interfaceLIGHT ENOCEAN INTEGRATION
GATEWAYS FOR ENOCEAN
RADIO DEVICES
Our gateways enable you to integrate ENOCEAN radio devices like
push buttons or sensors into your system.
Transparent version with ENOCEAN ESP3® protocol.
Extensive internal mapping between ENOCEAN telegrams and
MODBUS registers, KNX group telegrams or DALI commands.
Illuminated frame with RGB LEDs.
We offer various designs and materials of the front plate and
individual logo and text engraving.
Different bus versions: RS485 (MODBUS or ASCII), KNX or DALI.
Models with integrated temperature or air quality sensor.
Suitable for GIRA®, BERKER®, SIEMENS®, LEGRAND® or JUNG®
frames.
In-wall mounting in standard wall mount box.
RESI-RC-ENO1-xx
●
Control unit to integrate ENOCEAN radio devices
●
Internal mapping between ENOCEAN telegrams and
●
MODBUS registers, KNX group telegrams or DALI commands
●
RGB LEDs for frame illumination
●
Optional Integrated temperature sensor
●
Optional Integrated air quality sensor
●
Bus interface:RS485, KNX or DALI
●
individual materials and designs
●
Custom cover plate text engraving
●
Suitable for almost all frames on the market
●
In-wall mounting
Please ask for more details about this productLIGHT POWER SUPPLY
24VDC POWER SUPPLIES
Our power supply offers 24Vdc output voltage with max. 65W.
With our seven removable 24V output terminals, you can easily wire
your DC application without the need of additional clamps in your
switchboard cabinet.
RESI-PS-65W-24V
●
Power supply for 24Vdc, max65W
●
Seven removable 24Vdc terminals for easy cabling in
switchboard cabinetYou can also read
