Motorbikes /Quads - Manufacturer since 1939 SADAPS BARDAHL Additives & Lubricants
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Motorbikes /Quads
SADAPS BARDAHL
Additives & Lubricants
ZI Tournai Ouest II - Rue du Mont des Carliers 3
7522 TOURNAI (BELGIUM)
Tel.: +32 69 59 03 60
Manufacturer since 1939
01/2011
www.bardahl.be
Champions of innovation:
More than 70 years of technological evolution
Top secret innovation. A trademark present
In the 30’s Ole Bardahl emigrated from Norway and through his racing involvement all around the world.
developed a revolutionary lubricating concept based on the reversal of polar
attraction in oil molecules. No matter the mechanical system Polar Plus leaves Today, BARDAHL trademark is present on the 5 continents
an anti-friction, anti-wear and extreme pressure film on all the moving metal and its products are sold in more than 90 countries.
components. The product was so miraculous that the American army decided to We owe this “Success Story” to the unique formula
classify it as top secret until the end of the Second World War. BARDAHL products originated by Ole Bardahl but also to a permanent
appeared in France in 1954 where they are now developed for industrial, automobile, research of our BARDAHL engineers who innovate
agricultural and do-it-yourself use. and contribute to offer you a world without friction.
Production sites
Research and development.
Today, innovation is the major asset of competitive
The manufacturer
industrial companies. BARDAHL laboratories have been guarantee.
developing solutions for 70 years which meet the ever more
strict technological requirements. This permanent research is Established on two production sites, SADAPS
based on laboratory tests, engine trials, OEM approvals, etc. BARDAHL controls its processes from the
conception of the formulas to the distribution of
finished products, with a constant will to improve
the quality. This achievement can be seen in
continuous industrial investments and rigorous
controls throughout the manufacturing chain.
A different approach.
Our strategy is orientated towards a widened vision of the future where
the balance between the company growth, people’s well-being and the
planet’s health must be achieved.
The ISO 14001 certification of our plant in Tournai plus the
development of more ecological products and the use of “Aerosols”
production unit
inert propellant gas protect the environment and truly
reflect our will to succeed.
To go further, we have embarked on a patronage
programme with the French Forest National Office
(Office National des Forêts) and have started a The ISO 9001 certification
by the AFAQ crowns
voluntary three-year programme to reforest
our policy towards
state-owned woods in Retz in the Aisne (France). the perfect quality.
We contribute therefore to carbon dioxide
sequestration and the reduction of greenhouse gases. The ISO 14001 certification
proves our permanent
commitment to reduce
the impact of our activity
and our production
on the environment. 14001
BARDAHL BARDAHL
PRINCIPLES PROOFS
4 The use of lubricants is necessary to: Controlled efficiency 5
• Facilitate sliding between two moving machine parts. • Avoid seizure even under heavy loads. The efficiency of a lubricant can be established by many performance tests.
• Reduce and avoid premature wear of equipment. • Protect machine parts from oxidation and corrosion. Among them, the 4 ball test which shows best the “extreme pressure” and “anti-wear”
• Avoid overheating and eliminate excess heat generated by friction. • Improve water proofing and protection from other external pollutants. performance.
The results of BARDAHL lubricants are always exceptional thanks to the BARDAHL
The BARDAHL “POLAR PLUS” principle “POLAR PLUS” film and the “FULLERENE C60” principle.
Bardahl lubricants are formulated from “polar active” agents. Those components behave like micro-magnets.
They are attracted by metal surfaces on which they adhere to form an extremely resistant lubricating film. 4 BALL EXTREME PRESSURE TEST 4 BALL ANTI-WEAR TEST
This molecular film prevents damage generated by the ‘rough surfaces’ on metal parts which cause early EXCLUSIVE
POLAR PLUS Weld load in Newton Weld load in Newton Wear mark in mm 2 Wear mark in mm2
wear and seizure. FORMULA 5000 N 5000 N
0,26 0,4
Metal parts come into contact with each The lubricating film formed by the 0,15
other through the ‘rough peaks’ on their “POLAR PLUS” active agents 4250 N
3100 N
surfaces and it’s these peaks that bear all avoids contact between peaks 0,05
the load and pressure which in turn and therefore reduces wear
causes undue wear and eventual seizure. and seizure risks.
2700 N
Moving metal Moving metal 1250 N
Curative 0,05
surface surface
treatment:
BARDAHL 0,01
Friction points Without friction points reduces wear +0% +10% +20% +0% +10% +20% +0% +10% +20% +0% +10% +20%
ISO 220 gear oil ISO 46 hydraulic oil ISO 220 gear oil ISO 46 hydraulic oil
+ BARDAHL active components (%) + BARDAHL active components (%) + BARDAHL active components (%) + BARDAHL active components (%)
This test shows the lubricant capacity to This test shows the lubricant capacity
avoid seizing during increased loads. With to prevent wear and protect material
The “friction meter“, our mobile BARDAHL
demo machine, allows us to BARDAHL lubricants avoid material damage. thereby increasing lifespan under the
Moving metal Moving metal demonstrate this molecular most difficult working conditions.
The load required to effect seizure is
surface surface Preventive lubricating film and to illustrate Wear is reduced by a factor
4 times higher when BARDAHL additives Without
treatment: the protection offered to are present. of eight thanks to the
BARDAHL
BARDAHL machined surfaces. BARDAHL molecular film.
Without BARDAHL With BARDAHL avoids wear
All of our lubricants are formulated and controlled in laboratories.
The FULLERENE C60 principle NOBEL PRIZE WINNER
FOR CHEMISTRY in 1996
Spacing out the lubrication periodicity, they help to protect the environment.
BARDAHL has been the first company in the world to apply the Fullerene chemistry to the lubricants field.
We used the fact that Fullerene spheres act like extremely stable micro-bearings:
coming between surfaces in contact, they assist lubricity and reduce friction. BARDAHL
The BARDAHL formula is particularly efficient in difficult lubricating conditions:
• Cold starts (mainly responsible for wear) MOTORBIKES OILS
• Difficult working conditions
EXCLUSIVE
Laboratory tests have shown that the BARDAHL FULLERENE formula can reduce friction and wear by up to 70 % at ‘start FULLERENE
up’ and by up to 34 % while running at normal temperature.
FORMULA Up to 90 % less friction
Up to 70 % less wear
BARDAHL The best mechanical protection
XTC C60
and Up to 5 % more power and torque
XT4 C60 Improved engine acceleration
A first step in the Reduced fuel consumption
The BARDAHL formula is efficient as a result of its triple
competition world
protection against wear, friction and deposit reduction.
• This formula creates a thick lubricating layer on the surface Engine protection at high temperature
that needs protection.
• The “POLAR PLUS” molecules form a line of second defence The Fullerene Perfect protection, even in case of oil
to protect from wear, because they reduce friction and
deposits.
C60 molecule or coolant shortage
• Moreover, Bardahl has used C60 Fullerene in its formula:
Fullerene molecules act like spherical micro-cushions giving BARDAHL lubricants do not contain toxic or harmful additives,
final protection to the engine. such as graphite, ceramics, chlorinated paraffin, PTFE, Teflon ®, lead, etc.
BARDAHL C60 BARDAHL XT – XTC
RACING OILS EXCLUSIVE
FULLERENE
EXCLUSIVE
POLAR PLUS O C TA N E
BOOSTER
MOTORBIKE RACING OILS
FORMULA FORMULA
6 BARDAHL C60 Motorbike 4 stroke Oils with Polar Plus & Fullerene :
7
For 70 years, BARDAHL has been involved in many different types of MOTORSPORTS around the
World: car races, Formula 1, motorbikes, Go-Karts, boat races, Jet ski, All Terrain Vehicles (ATV) and
other engine powered sports. Premium performance lubricant, especially developed for
4-stroke hypersport, sport-touring, on/off-road powerful motorcycles,
For 70 years, Racing Teams have been using BARDAHL Lubricants to become champions in all types of
races worldwide. both multi-cylinder and monocylinder types, with or without oil-bath
clutch. Thanks to its fully synthetic formula and the addition of
Bardahl C60 Racing Oils are used by many different Motorbike Racing Teams. BARDAHL is the
official oil supplier in Europe for Beta Moto, Bimota, Moto Morini, Honda Italy (cars),Suzuki GB Youth particular polymers with a high shearing strength, BARDAHL C60
Team MX and Vespa. lubricants give excellent performance in terms of resistance
to thermal deterioration due to oxidation and strengthen the
lubricating oil film, even under the most severe working
conditions. Thanks to its special additives, the effectiveness of
WORLD EUROPEAN NATIONAL REGIONAL its Fullerene Polar Plus formula and the Clutch Performance
Technology intended for 4-stroke motorcycles with
CHAMPIONS CHAMPIONS CHAMPIONS CHAMPIONS motor-integrated gear shift and oil-bath clutch, XTC C60
200 Liters
50 Liters
MOTO OILS enhances the transmission and engine 1 Liter 2 or 3 sizes available
performance, thus improving better acceleration as well.
BARDAHL XT-4 C60
RACING XT-4 E X CL USI VE EXCLUSIVE
POLAR PLUS FULLERENE
FORMULA FORMULA
BARDAHL XT4 C60 Racing is a special lubricant for high sporting use, formulated for 4 stroke road motorbikes,
CLUTCH PERFORMANCE with high potential performance, with or without oil bath clutches, air or water-cooled. Formulated with a synthetic base
and special HIGH SHEAR STABILITY polymers, BARDAHL XT4 C60 Racing maintain the viscosity of the oil and
TECHNOLOGY guarantees a perfect lubrication in all extreme conditions and even in high & low temperatures.
BARDAHL 4 STROKE Moto lubricants are formulated to meet the severe technical requirements of
modern engines and the demanding needs of motoriders who want better accelerations and maximum
performance in total safety and reliability. BARDAHL Advanced Technology combined with POLAR PLUS &
FULLERENE C60 FORMULAS and the CLUTCH
Thrusters with more specific power and higher speed (often associated with a transmission system with PERFORMANCE TECHNOLOGY (special additive for
integrated gear and clutch in oil bath) require technologically advanced lubricants, formulated ad hoc to
4 stroke engines equipped with an oil bath clutch) guarantee
allow a total lubrication of the engine, clutch and gearbox.
an efficient lubrication of the engine & clutch, and give your
The so-called Clutch Performance Technology used by BARDAHL to formulate our range of 4 stroke engine a high potential and better accelerations.
allows for:
• maximum protection and lubrication of gearbox and clutch
• an optimal transfer of torque transmission
• maximum acceleration and greater driving comfort
Thanks to the exclusive Polar Plus – Fullerene formulas and the Clutch Performance Technology, XT-4 SAE 10W-60
BARDAHL manufactures products that help enhance the efficiency of transmission by ensuring XT4 C60 10W-60 Ultra grade
the best protection of engine and gearbox in any driving condition. • Prevents the oil from burning
• Stabilizes the oil viscosity
In April 2006 the JASO (Japanese Automobile Standards Organization) has revised the JASO T903: • Offers an efficient lubrication during cold start,
1998 specification related to 4ST Moto lubricants. high temperatures and extreme conditions
• Reduces friction in the engine and increases
horse power and torque
The JASO classification is based on the ability of a lubricant to allow proper adhesion between clutch • Reduces wear on camshafts , crankshaft and
disks so that the torque can be transmitted from the engine gearbox without slippage. gearbox
• Makes gear shifting easier
By measuring 3 specifications (DFI-SFI-STI) that assess torque transfer under conditions of dynamic and 100% synthetic.
static friction and the speed of transfer, lubricants can be classified into:
• API SM / JASO T903:2006 MA-MA2
• JASO MA allows for a high friction (suitable for oil bath clutches)
• JASO MB allows for a minor friction
Ref. 347040 / 24 x 1 Liter Ref. 347054 / 200 Liters
BARDAHL XTC C60 BARDAHL XTC C60
COMPETITION OILS XTC COMPETITION OILS
EXCLUSIVE EXCLUSIVE
POLAR PLUS FULLERENE
FORMULA FORMULA
8 9
BARDAHL XTC C60 Racing Oils are special lubricants for high
sporting use, formulated for 4 stroke off road & road motorbikes. They
have been developed for high potential performance engines, mono or
XTC SAE 15W-50 XTC SAE 20W-50
multi cylinders, with or without oil bath clutches, and water or air cooled. XTC C60 15W-50 On Road XTC C60 20W-50 On Road
For Motorbikes that require high For Motorbikes that require high
viscosity oil for high temperatures and viscosity oil for high temperatures and
Formulated from fully synthetic base oil and special HIGH SHEAR long races or endurance. Ideal for high long races or endurance. Ideal for high
STABILITY polymers, BARDAHL XTC C60 Racing Oils maintain the performance engines, single or multiple performance engines, single or multiple
cylinders, Road racing, Superbike, cylinders, Road racing, Superbike,
oil viscosity and guarantee a perfect lubrication in all extreme conditions Supermotard etc... A little more time Supermotard etc... A little more time
and even at high temperature. is taken to reach the optimum engine is taken to reach the optimum engine
temperature so ideal for use in warm temperature so ideal for use in warm
BARDAHL XTC C60 Racing SAE Moto Oil: ambient temperatures. ambient temperatures.
• Prevents the oil from burning 100% synthetic. 100% synthetic.
• Stabilizes the oil viscosity • API SM / JASO T903:2006 MA-MA2 • API SM / JASO T903:2006 MA-MA2
• Offers an efficient lubrication when cold starting, at high temperatures and
in extreme conditions
• Reduces friction in the engine and increases horse power and torque
• Reduces wear on camshafts, crankshaft and gearbox Ref. 324140 / 24 x 1 Liter Ref. 324152 / 50 Liters Ref. 324154 / 200 Liters Ref. 341140 / 24 x 1 Liter Ref. 341052 / 50 Liters Ref. 341054 / 200 Litrers
• Makes gear shifting easier
BARDAHL Advanced Technology combined with POLAR PLUS & FULLERENE C60 FORMULAS and the CLUTCH
PERFORMANCE TECHNOLOGY (special additive for 4 stroke engines equipped with an oil bath clutch) guarantee an
efficient lubrication of the engine & clutch, and give your engine a high potential and better accelerations.
You can use all the
XTC C60 for your
XTC SAE 5W-40 XTC SAE 10W-30 4 stroke jet-skis,
XTC C60 5W-40 On Road XTC C60 10W-30 On Road snowmobiles or
For use at low temperatures. For Motorbikes that require low
viscosity lubrication. Excellent for
boat engines
Engine will raise faster to working sprint races.
temperatures. Very good for small engines,
Excellent for sprint races, trials etc… 1 or 2 cylinders up to 600 cc or more.
Better for winter use Winter and Summer use.
100% synthetic. 100% synthetic.
• API SM / JASO T903:2006 MA-MA2 • API SM / JASO T903:2006 MA-MA2
Ref. 334140 / 24 x 1 Liter Ref. 334152 / 50 Liters Ref. 334154 / 200 Liters Ref. 348140 / 24 x 1 Liter Ref. 348152 / 50 Liters Ref. 348154 / 200 Liters
Win
everywhere
with Bardahl !
XTC SAE 10W-40 XTC SAE 10W-50
XTC C60 10W-40 On Road XTC C60 10W-50 On Road
For Motorbikes that require low For Motorbikes that require high
viscosity lubrication. Excellent for viscosity oil for high temperatures and
sprint races. long races or endurance.
Very good for small engines, Designed for high performance engines
1 or 2 cylinders up to 600 cc or more. with single or multiple cylinders, Road
Winter and Summer use. Racing, Superbike, Supermotard etc...
100% synthetic. Winter and Summer use.
100% synthetic.
• API SM / JASO T903:2006 MA-MA2
• API SM / JASO T903:2006 MA-MA2
Ref. 326140 / 24 x 1 Liter Ref. 326152 / 50 Liters Ref. 326154 / 200 Liters Ref. 338140 / 24 x 1 Liter Ref. 338152 / 50 Liters Ref. 338154 / 200 Liters
BARDAHL XTC C60 BARDAHL SO-4 STROKE
OFF ROAD SPECIAL XTC EXCLUSIVE EXCLUSIVE EX C L U S I V E
SO-4 SCOOTER OILS
POLAR PLUS FULLERENE POLAR PLUS
FORMULA FORMULA FORMULA
10 Total protection performance Total protection performance 11
BARDAHL exclusive POLAR PLUS - FULLERENE FORMULA offers a BARDAHL exclusive POLAR PLUS FORMULA offers a
triple-layer protection: double layer protection: a lubrication film on the surface and a
a lubrication film on the surface, a layer of POLAR MOLECULES and additional layer of POLAR MOLECULES creating a permanent
FULLERENE C60 molecules as a final protection mechanism. security barrier in between the metal surfaces of the engine.
• The POLAR PLUS molecular lubricating film adheres permanently on the The extraordinary properties of BARDAHL POLAR PLUS
engine metal parts by creating a permanent security barrier. FORMULA reduce wear, preserving the engine and transmission.
• The FULLERENE C60 molecules act like microballs between metal surfaces BARDAHL formula ensures a level of performance far superior
and therefore reduce wear, preserving the engine and transmission. to conventional lubricants.
e
tr
ok
Properties:
The POLAR PLUS and FULLERENE C60 formula ensures a level of performance far
- 2s
superior to conventional lubricants. High performance lubricant for modern scooter 4 stroke engines.
9X
Properties : The use of high quality synthetic bases and special high shear stability VE4
NO
The use of high quality synthetic bases and special high shear stability polymers allows for outstanding performance in terms of polymers allows for outstanding performance in terms of resistance to thermal BENELLI QUATTRO
resistance to thermal degradation and oxidation, and effectiveness of the lubricating oil film even under the most extreme conditions. degradation, strengthened resistance of the lubricating film at high temperatures,
increased fluidity enabling immediate and effective lubrication, including when the engine is cold.
Thanks to its special additives, the effectiveness of the Fullerene Polar Plus formula and the Clutch Performance Technology
intended for 4-stroke motorcycles with motor-integrated gear shift and oil-bath clutch, BARDAHL XTC C60 off-road SO-4 SCOOTER operates actively on the control of deposits formed at low temperatures due to the continuous stop and
enhances the transmission and engine performance, thus improving acceleration as well. go, and at high temperatures when used at higher speeds. Thanks to the BARDAHL POLAR PLUS formula,
SO4 SCOOTER oil always ensures an effective lubrication and gives an increased protection to the engine, even under the
XTC C60 Off-road guarantees the control of deposits, allowing to extend engine life. most critical operating conditions. Guarantees also a drastic reduction of friction in the engine and increased performance.
XTC C60 Off-road has been specifically formulated to meet the multiple and conflicting lubrication requirements of off-road
4 stroke Moto engines.
• Resistance to heat
• Excellent lubrication of gearbox and clutch XTC SAE 10W-40 SO-4 SAE 5W-40 SO-4 SAE 10W-40
• Prevents the oil from burning
• Stabilizes the oil viscosity XTC C60 10W-40 Off road SO-4 Scooter Oil 5W-40 SO-4 Scooter Oil 10W-40
Direct lubrication in cold & mid Direct lubrication in cold & mid
• Offers an efficient lubrication when cold starting, at high temperatures For single or multiple cylinder 4 stroke
temperatures. temperatures.
motorbikes used in off road sprint races,
and in extreme conditions excellent for cold & mid temperatures For Scooters up to 500 cc or more. For Scooters up to 500 cc or more.
• Reduces friction in the engine and increases horse power and torque and low & mid grip tracks 100% synthetic. 100% synthetic.
100% synthetic.
• Reduces Wear on camshafts, crankshaft and gearbox
• API SL / JASO T903:2006 MA / • API SL / JASO T903:2006 MA /
• Makes gear shifting easier • API SM/JASO T903: 2006 MA-MA 2/
BARDAHL XTC C60 Off-road is indicated
for the following categories of bike:
• Cross/Enduro
• ATV
Ref. 351140 / 24 x 1 Liter Ref. 351152 / 50 Liters Ref. 352154 / 200 Liters Ref. 346040 / 24 x 1 Liter Ref. 346052 / 50 Liters Ref. 346054 / 200 Liters Ref. 345040 / 24 x 1 Liter Ref. 345052 / 50 Liters Ref. 345054 / 200 Liters
All these products are available in 3 sizes:
XTC SAE 10W-50 XTC SAE 10W-60 • 1 liter bottle
• 50 liter drum
XTC C60 10W-60 Off road
XTC C60 10W-50 Off road
For single or multiple cylinder 4 stroke
• 200 liter drum
For single or multiple cylinder 4 stroke
motorbikes used in off road sprint races, motorbikes used in off road sprint races,
excellent for cold & mid temperatures excellent for cold & mid temperatures
and low & mid grip tracks and low & mid grip tracks
100% synthetic. 100% synthetic.
• API SM/JASO T903: 2006 MA-MA 2/ • API SM/JASO T903: 2006 MA-MA 2/
200 Liters
1 Liter 50 Liters
Ref. 340140 / 24 x 1 Liter Ref. 340152 / 50 Liters Ref. 340154 / 200 Liters Ref. 352140 / 24 x 1 Liter Ref. 352152 / 50 Liters Ref. 352154 / 200 Liters
BARDAHL BARDAHL GEAR BOX OILS
2 STROKE OILS EXCLUSIVE
POLAR PLUS
EX C L U S I V E
POLAR PLUS
FORMULA
EXCLUSIVE
FULLERENE
FORMULA
FOR MOTORBIKES - ATV
FORMULA
12 13
Total performance protection Properties:
The exclusive anti friction BARDAHL POLAR PLUS FORMULA Lubricants for transmissions of motorcycles with separate GEAR BOX SAE 10W-30
forms a molecular lubricating film that creates a permanent security lubrication gear. Clutch Performance Technology.
barrier and drastically reduces friction between all engine parts. BARDAHL exclusive POLAR PLUS – FULLERENE GEAR BOX
FORMULA offers a triple-layer protection: Clutch Performance Technology: improves efficiency
BARDAHL lubricants therefore offer a maximum anti seize protection,
a lubrication film on the surface, a layer of POLAR of transmission for maximum acceleration
protect the crankshaft and connecting rod, and give increased power and Maximum protection of clutch and gearbox
MOLECULES and additional FULLERENE C60
efficiency to the engine. Protective lubrication and cleaning of all gears of
molecules as a final protection mechanism. Excellent the transmission
BARDAHL ensures performance far superior to conventional lubricants. antiwear protection, high level of lubrication, full Higher resistance against thermal oxidation and
protection of mechanical components, even in difficult degradation
Properties:
Premium performance lubricants for high performance 2 stroke motorbikes. operating conditions and enhanced performance of • API SG-JASO T903: 2006 BUT-SAE 10W-30
transmission allowing soft and precise shifting.
The BARDAHL POLAR PLUS FORMULA gives your bike more power and
the best protection, even in the most difficult conditions.
Ref. 402040 / 24 x 1 Liter
BARDAHL 2 STROKE OILS have been formulated with the innovative chemistry of
high molecular mass polisobutene and with low ash contents additives. They therefore reduce fuel venting
through the exhaust (Smokeless technology), ensuring maximum protection and better cleanliness of the engine.
BARDAHL MARINE 2 STROKE OILS
E X CL USI VE
2 STROKE MOTORCYCLES 2 STROKE JET SKI POLAR PLUS
FORMULA
KXT KGR INJECTION KGR FUEL MIX AQUABIKE RACING
KXT Racing KGR Injection KGR Fuel Mix AQUABIKE Racing
Manual or automatic oil mix. For automatic mixing systems. For manual oil mix. Increases the Engine Power.
Concentrated formula to be Contains the unique additive Concentrated formula to be Contains the unique additive Bardahl
used at low dosage rate. Bardahl Octane Booster used at low dosage rate. Octane Booster that increases the
5
Formulated for 2 stroke that increases the petrol Contains the unique additive Petrol octane rate.
sports motorcycles. octane rate. Bardahl Octane Booster Maximum engine protection against seizure
Increases the engine power. 100% synthetic. that increases the petrol and wear.
octane rate.
Contains low ash contents • API TC/JASO FC/ISO EGD 100% synthetic.
Prevents “ RING STICKING “. TIMES WORLD
additives.
New generation100% synthetic oils.
100% synthetic. CHAMPION
• API TC/JASO FC/ISO EGD
• API TC/JASO FC/ISO EGD • API TC / JASO FC / TISI / GLOBAL EGD
EXCLU SIVE O C TA N E EXCLUSIVE O C TA N E EXCLUSIVE O C TA N E
POLAR PLUS POLAR PLUS POLAR PLUS O C TA N E
FORMULA BOOSTER FORMULA BOOSTER FORMULA BOOSTER BOOSTER
Ref. 221040 / 24 x 1 Liter Ref. 206040 / 24 x 1 Liter Ref. 227040 / 24 x 1 Liter Ref. 257140 / 24 x 1 Liter
2 STROKE SCOOTERS 2 STROKE OUTBOARD ENGINES
KTS SCOOTER RACING SCOOTER SYNT VBA SYNT DIRECT INJECTION
KTS Scooter Racing SCOOTER Synt VBA Synt DIRECT Injection
For automatic mixing systems. Manual or automatic oil mix. Manual or automatic oil mix. • Maximum protection for piston, combustion chamber
Contains the unique additive Contains the unique additive Perfect for mini bike racing. and spark plug
Bardahl Octane Booster Bardahl Octane Booster High lubricity and detergency • Ecological effect against deposits at all temperatures,
that increases the petrol that increases the petrol for maximum engine cleaning. prevents ring sticking and unusual wear from ring jacking.
octane rate.
The use of special synthetic
ester guarantees a higher
octane number.
High-performance lubricant
high power auto-mixing,
100% synthetic.
Protects against mechanical
PHOTO • Superior protection against rust , corrosion and wear.
• Smokeless technology.
protection to the engine.
100% synthetic.
specific for 2 stroke scooters.
100% synthetic.
wear and corrosion.
• API TC/JASO FC
EN ATTENTE • Has NMMA TC – W3 specs for engines with fluor
direct injection.
100% synthetic.
• API TC/JASO FC/ISO EGD • API TC/JASO FC
• NMMA TC-W3
EXCLUSIVE O C TA N E EXCLUSIVE O C TA N E EXCLUSIVE EXCLUSIVE
POLAR PLUS BOOSTER POLAR PLUS BOOSTER POLAR PLUS POLAR PLUS
FORMULA FORMULA FORMULA FORMULA
Ref. 220040 / 24 x 1 Liter Ref. 201140 / 24 x 1 Liter Ref. 202140 / 24 x 1 Liter
Ref. 258049 / 6 x 4 Liters
BARDAHL RACING
FLUIDS AND OILS BARDAHL SPECIALS
Full Metal Moto is a high technological oil additive for new
14 BARDAHL BRAKE FLUIDS motorbike engines or old high mileage motorbike engines. 15
Full Metal Moto is a 7 action oil additive
preventive + curative
DOT 4 RACING DOT 5.1 RACING FULL METAL MOTO
BRAKE FLUID BRAKE FLUID ENGINE PROTECTOR + RESTORER
Brake fluid with a high boiling point. Offers perfect stability and performance • Protects new engines against wear
Suitable for any type of braking system in any operating condition. (adjust Full Metal after the first oil drain).
for cars, trucks, buses, karts, etc. Recommended for ABS and Racing systems. • Restores microscopic wear, piston, cylinders,
100% synthetic. 100% synthetic. camshafts, etc...
• SAE J 1703 • SAE J 1703 • Restores sealing piston-cylinder.
• US FMVSS 571.116 • US FMVSS 571.116, DOT 4 e DOT 5.1 • Protects against oil oxidation.
• DOT 4 • Improves the engine performance from old
& new motorbikes.
Viscosity at - 40°C max. 800 cst
• Stabilizes the warm oil viscosity.
Viscosity at + 100°C min. 2,2 cst
In our Brake Fluid Range we also have • Improves gear shifting.
DOT 3 and DOT 5 silicone Fluid ! Dry boiling (°C) min. 275 • Reduces engine noise.
Ask your dealer for more information Wet boiling (°C) min. 185
EXCLUSIVE EXCLUSIVE
PH 7,542 FULLERENE
FORMULA
POLAR PLUS
FORMULA
Ref. 56504 / 24 x 250 ml Ref. 53551 / 12 x 1 Liter Ref. 53555 / 4 x 5 Liters Ref. 53602 / 24 x 250 ml Ref. 53651 / 12 x 1 Liter Ref. 53655 / 4 x 5 Liters Ref. 2812 / 12 x 75 ml
BARDAHL FORK & SHOCK ABSORBER OILS BSF/OB is a professional product specific for racing engines RECOMMENDED AND APPROVED
Bardahl XTF Fork oil and Bardahl XTF Shock absorber oil with high compression ratio. BY MAJOR MANUFACTURERS
contain components which minimize:
• Oil oxidation BSF RACING OCTANE BOOSTER
• Oil foaming XTF OCTANE BOOSTER MOTORCYCLE
FORK OIL
• Gum and varnish deposits BSF Octane Booster is a professional Octane Booster Motorcycle
• Seal hardening XTF Fork Oil product especially developed for racing • Increases instantly the octane rating
• Excellent anti foam properties
• Seal leakage engines. of gasoline of 4-5 points and leads to
• Superior corrosion protection properties • Increases the octane rate by 5 points a controlled uniform combustion.
• Wear of components • Superior oxidation resistance (anti-knock power). • Increases the power and engine life.
• Excellent temperature stability • Enables a controlled and more uniform
Bardahl XTF Fork Oil is available in different viscosity grades from SAE combustion.
• Anti-0248: deletes the knocking due
to pre-ignition and detonation or low
• Formulated to maintain seal pliability
5 up to SAE 20. Use the viscosity of XTF recommended by your fork or • Increases the engine performance. octane petrol
shock manufacturer. If you wish to change the suspension performance of • For two- and four-stroke engines. • Inhibits the phenomenon of post-ignition
ATF Fork Oils are also deliverable caused by deposits in the combustion
your forks, use lower viscosity oils to obtain a "softer" ride and more in 5, 25, 60 litre. Ask your
• 1 Litre treats 330 Litres of petrol.
chamber.
viscous oils to stiffen ride. Because of the high viscosity index these fork dealer for more information
oils can be considered as multigrade fork oils. O C TA N E O C TA N E
BOOSTER BOOSTER
Ref. 56501 / 2.5W 24 x 500 ml Ref. 56505 / 5W(20) 24 x 500 ml Ref. 56515 / 7,5W(20) 24 x 500 ml Ref. 56525 / 10W(30) 24 x 500 ml Ref. 56535 / 15W(30) 24 x 500 ml Ref. 56545 / 20W(40) 24 x 500 ml Ref. 100039 / 6 x 1 Liter Ref. 104011 / 24 x 150ml
Bardahl XTF Racing Shock absorber Oil is a premium quality
hydraulic oil / lubricant designed to maximize the performance of
motorcycle and car shocks.
XTF RACING BCS 400 EXTREME PRESSURE RACING CHAIN LUBE
SHOCK ABSORBER OIL DRY LUBRICANT MOTORCYCLE - KARTS
XTF Racing Shock absorber Oil BCS 400 Dry Lubricant can be used: Racing Chain Lube can be used for:
• Excellent anti foam properties • To lubricate dry chains (it protects • Wet chain lubrication for road use.
• Superior corrosion protection properties against dust, sand, mud, water,…). • High lubrication in cold and warm
• Superior oxidation resistance •To protect forks and absorber pistons temperatures.
• Excellent temperature stability against wear, rust and corrosion. • Very successful in karting.
• Formulated to maintain seal pliability •To lubricate gas cables,… • For best result, apply a few hours
before riding.
Ref. 56651 / 12 x 1 Liter Ref. 56655 / 4 x 5 Liters Ref. 56682 / 25 Liters Ref. 1912 Ref. 2810
12 x 500 ml - Aerosol 12 x 500 ml - Aerosol
BARDAHL XTC C60
BARDAHL
OFF ROADSPECIALS
SPECIAL XTC BARDAHL SPECIALS
10
16 GEL DOZE New design Gel Doz, Easy to use,
Practical, No Waste, Measuring Pump, 17
ANAEROBIC GELS Does not drip.
BRO SILICONE LUBE
PENETRATING OIL DRY EN CLEAN LUBRICATION
BRO is a penetrating oil with high SILICONE LUBRICANT can be used:
lubrication properties • To improve lubrication for metal and non
Can be used for: metal compounds.
• Chain lubrication (O ring) protects • To protect against water , rust and
against all kinds of dust, sand, mud, oxidation.
water, etc... • To form an antistatic film against dust.
• Releases bolts and nuts.
• Can be used as High penetrating and
High pressure lubricant for all uses.
• Protects against rust & corrosion.
GEL DOZ FF 12 GEL DOZ FF 40 GEL DOZ FC 32 GEL E 77
Thread Lock Thread Lock Cylinder piece fixing Sealing of tubes
Medium resistance Strong Resistance very high resistance and pipes
Ref. 1122 Ref. 2092
12 x 500 ml - Aerosol 12 x 600 ml - Aerosol Ref. 5042 / 10 x 35 g Ref. 5044 / 10 x 35 g Ref. 5048 / 10 x 35 g Ref. 5046 / 10 x 35 g
BD 50 POLY S2 MULTIPURPOSE NCE 3 1C
MULTISPRAY HIGH QUALITY GREASE ELECTRICAL CONTACT CLEANER EASY GASKET
BD 50 Multispray with Ester oil 100% Synthetic Polymer grease for long NCE 3 Electrical Contact cleaner High quality universal gasket compound.
and EP additives life application, general use on motorbikes • Cleans electronic and electrical Easy to work and replaces all types of pre
• Lubricates and penetrates • For use between -30°C to + 170°C contacts. formed gaskets.
• Repels moisture • Very strong against wear and high • Copper de-oxidant. • For gearboxes,waterpumps,valve
pressure covers,crankcases , etc...
• Cleans and protects • Not greasy.
• Resists against water, dust, sand, etc.. • Non Conducting product.
• Fights rust and water • Repels moisture, prevents oxidation.
• For slow and fast rotations. • For temperatures from -50°C to +260°C.
• Cleans all metals, plastics etc.. Warning : make sure parts are dry before
• Axles, bearings,etc... reconnecting device. • Avoid permanent contact with petrol.
• Contains no silicone
• Can be used with metal, glass, rubber,
plastics, wood, etc...
• Black colour
Ref. 3221 Ref. 1892
12 x 500 ml - Aerosol Ref. 1701 / 12 x 200 g Ref. 1700 / 24 x 400 g 12 x 500 ml - Aerosol Ref. 2059 / 12 x 120 g Ref. 2060 / 12 x 240 g
CERAMIC PASTE
Grease containing micro ceramic
components and resisting high
temperatures.
POLY SEALER PS 55 DEGREASER
• Prevents oxidation by contact from BRAKE CLEANER
copper en metal.
• Prevents cold welding between 2 metals. MS-Polymer sealer is a one component, All purpose degreaser without chlorine ,
• Very useful for stainless steel metals RVS. strong elastic adhesive/sealant, cures fast drying.
quickly under influence of air humidity. • Cleans metal parts, chains, bearings,
• Useful on small needle cages (piston, Paintable after skin forming
gearbox , etc...). brakes.
• Fixing and sealing of metal and plastic parts. • Degreases before painting.
• Resists temperatures up to +900°C.
• Bodywork metal or plastic.
• Can be used as a mounting paste.
• Vibration suppression between metals,
wood, etc...
• You can seal almost everything with
this PS55
Ref. 4451
Ref. 1821 / 12 x 200 g Ref. 2067 / 12 x 290 ml white Ref. 2068 / 12 x 290 ml black 12 x 500 ml - Aerosol
BARDAHL XTC C60
BARDAHL
OFF ROADSPECIALS
SPECIAL XTC BARDAHL SPECIALS
10
18 19
UNIVERSAL HANDCLEANER ENGINE GEARBOX
MOTORBIKE CLEANER CLEANS AND PROTECTS YOUR HANDS STOP LEAK OIL ADDITIVE
• Cleans all parts on motorbikes • Cleans grease, oil, paint, tar, etc.. • Stops engine oil leaks and • Use only in gearboxes without
(plastics, metal, …) • Citrus perfumed. reduces exhaust oil fumes due oil clutch plates (dry clutch).
• Spray product and wait for 5 minutes • Leaves a protective film on your hands. to hard rubber seals. • Makes gear shifting easier.
before cleaning with high pressurized • Restores rubber seals in the • Reduces noise and friction.
• Economical size
water. engine and valve steals.
Do not forget to order the corresponding • Reduces wear in the gearbox.
• For hand cleaning: spray product and • 1 can treats up to 6L of oil.
special hand pump and wall holder. • 1 tube treats 1 gearbox.
wait for 5 minutes before cleaning with
a soft cloth.
Ref. 0051
Ref. 3450 / 6 x 500 ml Ref. 2913 / 6 x 3 Liters Pump + wall bracket Ref. 1201 / 24 x 300 ml Ref. 1045 / 6 x 227 ml
UNIVERSAL
COOLANT
• This universal
coolant can be
mixed with all
existing engine
INJECTOR & CARBURETTOR PETROL RADIATOR RADIATOR coolants.
CARBURETTOR CLEANER BODY & THROTTLE CLEANER FUEL TREATMENT STOP LEAK FAST FLUSH • Ready to use
-25°C (exists
• Cleans injectors and • Cleans throttle & carburettor • Special petrol additive to • Stops leaks in the radiator. • Cleans the entire coolant also in -35°C
carburettor, valves and body. lubricate the upper part of • Can be used preventively. system. or antifreeze).
combustion chamber from • Spray product on the carb body the engine. • Eliminates rust & lime. • Protects against
• Mix in warm coolant or water.
motorbikes. en dry with compressed air. • Lubricates valves. corrosion.
• Compatible with all existing • Improves the engine cooling.
• Reduces exhaust fumes. • Spray on the throttle valves • Engine will run cooler. • Protects against
Coolants. • Pour 1 can in cooling system,
• Restores engine performance while engine is running (short • Better engine accelerations. run the engine for at least overheating.
• 1 can treats up to 20L
and power. strokes). 30 minutes and then drain
• 1 can (300ml) treats 80L of coolant.
• Reduces fuel consumption. • Can also be used for cleaning of fuel. coolant. Flush with fresh
• Use every 5000 km. carbon deposits. water and refill with Bardahl
appropriate coolant.
Ref. 1115 E
Ref. 2109 / 24 x 300 ml 12 x 400 ml - Aerosol Ref. 2009 / 24 x 300 ml Ref. 4001- 24 x 300 ml Ref. 4010 / 24 x 300 ml Ref. 7313 / 5 Liters
DRY AIR FILTER
CLEANER + LUBE KIT
INSTEAD OF LEAD • For use with Dry Cotton Air filters.
LEAD REPLACING ADDITIVE
• Prevents that dust, sand and moisture gets
• Prevents vapor lock in the engine.
(air bubbles in the fuel due to heat). • After cleaning the filter spray the product
• Better starting with warm engine TIRE AIR FILTER OIL on the outside of the filter.
(warm fuel). STOP LEAK - INFLATOR PURPLE FOAM
• Lubricates valves.
• 1 bottle (250ml) treats up • Stops small leaks in tires.
• For wet foam air filters.
to 250L of fuel. • Inflates the tire.
• Prevents that dust, sand
• Very useful if you have a flat and moisture gets in the
tire just before the race starts. engine.
• 1 aerosol = 1 treatment. • After cleaning the foam
filter put the clean filter in
the Purple foam liquid.
• Preparation of the product:
Mix 2.5 parts Purple foam
oil with 1 part Petrol shake
and the product is now
ready to use.
Lubricant aerosol only
Ref. 2219 / 12 x 250 ml Ref. 4941 - 13 x 300 ml Ref. 6310 / 12 x 455 ml Ref. 9119 / 6 x 1 kit Ref. 2979 / 12 x 150 mlYou can also read
