POLYMER DEMAND IN AFRICA - An AMI Consulting Data Report - The global plastics industry specialists - AMI International
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
POLYMER DEMAND
IN AFRICA 2 ND E DITION
An AMI Consulting Data Report
The global plastics
industry specialists
POLYMER DEMAND
IN AFRICA 2ND EDITION
An AMI Consulting Data Report What this report will give you
The report provides a complete, consistent statistical dataset for
polymer consumption by polymer, by process and by country. Key
Polymer demand in Africa is the second edition in a series of data highlights of the nature of the demand by each polymer, process
and country is also given. Published as a single volume report, the
reports from AMI Consulting. Each report draws on AMI Consulting’s report is divided into 7 easy to use sections covering polymer
unique, in-depth knowledge and understanding of the downstream demand by resin type, processing technology and country.
plastics processing value chain to provide unrivalled detail in This is set in the context of a global market overview.
quantifying the volume of polymer materials used across all major
Polymers covered
plastics processing technologies on a country-by-country basis. Commodity polymers: LDPE, LLDPE, HDPE, PP, PVC, EPS, PET
Engineering polymers: ABS/SAN, PA, PC, POM, PBT and PMMA
This is backed up by underlying economic data and polymer capacity
Processing technologies covered
and production data to provide a complete current statistical dataset Film extrusion, pipe/profile extrusion, sheet extrusion, injection
(for 2015, 2016 and 2017) for each country with future forecasts moulding, blow moulding, fibre extrusion, other processes
to 2021. ( including rotomoulding, cable extrusion).
Geographic coverage
Overview of the market in Africa The report covers all of Africa with data reported for the
The African market represents one of the least developed, but most following individual countries:
Algeria, Angola, Cameroon, D.R. Congo, Egypt, Ethiopia, Ghana, Ivory
exciting markets for polymers in the world today. It is a vast continent
Coast, Kenya, Libya, Morocco, Mozambique, Nigeria,
with a very large, growing and youthful population already highly Senegal, South Africa, Tanzania, Tunisia, Uganda, Zambia, Zimbabwe
concentrated in urban areas. Growth is not only fuelled by its natural
resources and minerals but also by its rising consumer markets Years covered
The report provides data for the following years: 2015, 2016, 2017 with
giving rise to a growing demand for a wide range of products five year forecasts for the period 2016-2021.
requiring plastics from mobile phones to packaging. While much of
this is still currently imported there is now massive investment in plastics Data covered
All data is reported in tonnes or thousand metric tonnes
processing operations driving growth in polymer demand.
Table of contents
Those that understand and participate in this market now will reap the The structure of the report Polymer demand in Africa is
benefit of that future growth. However, Africa is a very complex market as follows:
covering 53 countries and 2,000 languages and dialects. The needs 1. Introduction j. PA
2. Explanatory Notes k. PC
of North Africa markedly different to those of sub-Saharan Africa and
3. The global plastics industry l. PBT
market conditions vastly different in the well-developed South African a. Economic outlook m. POM
market compared with most other sub-Saharan countries. b. Status of the world n. PMMA
polymer market
c. Trends shaping the world 6. Major processing techniques
AMI’s new report, the 2nd of its kind for Africa, provides a detailed industry a. Film Extrusion
statistical analysis of where demand is currently occurring and the 4. The plastics industry in Africa b. Pipe extrusion
nature of processing that is carried out there, with an assessment of a. Economic outlook c. Profile extrusion
b. Polymer demand in Africa d. Sheet Extrusion
where the growth opportunities are likely to arise. c. Polymer demand by type e. Fibre and raffia extrusion
d. Polymer demand by country f. Cable extrusion
e. Per capita demand for polymer g. Injection moulding
f. Polymer capacities by country h. Blow moulding
g. End use applications i. Rotational moulding
h. Structure of the plastics j. Other
processing industry
i. Future development 7. Market overview by country
a. Algeria l. Mozambique
5. Resin markets b. Angola m. Nigeria
a. LDPE c. Cameroon n. Senegal
b. LLDPE d. D.R. Congo o. South Africa
c. HDPE e. Egypt p. Tanzania
d. PP f. Ethiopia q. Tunisia
e. PVC g. Ghana r. Uganda
f. GP-HIPS h. Ivory Coast s. Zambia
g. EPS i. Kenya t. Zimbabwe
h. ABS/SAN j. Libya u. Other African
i. PET k. Morocco countriesFilm Extrusion Section 6
Future prospects for film extrusion
Units: 000 Tonnes 2016 2021 CAGR 2016‐2021
NORTH AFRICA
Egypt 295.5 381.2 6.6%
Morocco 121.7 154.4 6.1%
Tunisia
Algeria
Libya
Other
SAMPLE only 75.9
137.0
9.0
26.5
96.2
172.1
15.9
34.4
6.1%
5.9%
15.4%
6.8%
Sub‐total 665.5 854.3 6.4%
SOUTH & CENTRAL AFRICA
South Africa 310.4 380.0 5.2%
Angola
PET Section
42.9
5 58.9 8.3%
D.R. Congo 40.2 64.2 12.4%
Zambia Demand for17.5
PET by process and 25.5
application 9.8%
Mozambique 12.9 19.5 10.9%
CAGR CAGR
Zimbabwe 10.7 14.1 7.2%
Unit: 000 Tonnes 2015 2016 2017 2015‐2016 2016‐2017
Other 15.3 19.9 6.8%
Film extrusion 0.0 0.0 0.0
Sub‐total 450.0 582.2 6.6%
Blow moulding 0.0 0.0 0.0
SAMPLE only
Pipe extrusion 0.0 0.0 0.0
WEST AFRICA
Injection moulding 629.3 686.1 750.4 9.0% 9.4%
Nigeria 356.6 520.3 9.9%
Sheet extrusion 69.7 73.4 77.5 5.3% 5.6%
Ghana
Cameroon
Fibre extrusion
47.2
38.5
Film Extrusion
70.9
107.4
52.0
112.9
10.7%
7.8%
Section 5.1%
118.7 6 5.1%
Roto moulding 0.0 0.0 0.0
Ivory Coast 41.1 67.8 13.3%
Other processing 0.0 0.0 0.0
Senegal 27.4 37.3 8.0%
TOTAL 806.3 872.3 946.6 8.2% 8.5%
Other 20.9 27.2
Producers of PP6.8%
Sub‐total 531.7 775.4 9.9%
Capacity Capacity
EAST AFRICA Units: 000 Tonnes Location 2016 2021
Kenya 111.8 160.1 9.4%
Tanzania
Ethiopia
33.3
24.2
Sasol Polymers
49.0
36.0
10.1%
10.4%
Secunda, South Africa 220 220
Methodology
Sasol Polymers Secunda, South Africa 300 300
Uganda 13.0 19.3 10.4%
Other 7.0 Safripol
9.1 (Pty) Ltd. 6.8% Sasolburg, South Africa 110 110
SAMPLE only
Sub‐total 189.3 273.4 9.6%
Indorama Eleme Petrochemical Ltd (IEPL) Port Harcourt, Nigeria 120 120
AMI Consulting Data Reports are based on
TOTAL 1836.5 2485.3
Dangote Group
7.9%
OKNLF Free Trade Zone, Nigeria 600 800 AMI’s own proprietary statistical databases
Oriental Petrochemicals Company (OPC) Sokhna, Egypt (160) (160) built up from over 25 years of research and
Egyptian Propylene and Polypropylene (EPPC) Port Said, Egypt 400 400
analysis of the global plastics industry. This
is then further supplemented by primary
Location of PP production in Africa
research to cross check and refine the
data. AMI has built it data from a unique
Polymer Demand in Africa 86 combination of bottom up (interviews
with primary processors) and top down
(interviews with raw material suppliers and
compounders) along with analysis of GDP,
population size, manufacturing output,
etc., in order to reach its assessment of
the size and structure of polymer demand
within each country. Due to its extensive
Polymer Demand in Africa 76 background knowledge and understand-
ing of plastics processing, AMI Consulting
is highly successful in engaging industry
participants in detailed discussions in order
to gain unique market insights and thanks
to its long-standing research of plastics
58
processing markets, can accurately model
and predict market trends.
Who should buy this report
Suppliers of polymers, compounds and masterbatch looking of processing activity to know where to focus sales and
for market intelligence on the size and structure of demand in marketing strategies.
order to understand where the market opportunities lie and
develop appropriate strategies Investors and business analysts who follow manufacturing
industries and want to keep up to date with the trends shaping
Plastic processors requiring market data and intelligence to the plastics processing industry.
support business planning or investment projects.
Manufacturers of machinery and equipment for the plastics
processing industry who need to understand the size and scaleOrder form Terms and conditions
To purchase Polymer Demand in Africa please complete the form below The report can be supplied as a hard copy report only or with a pdf
and return it to Cristina de Santos at AMI: cds@amiplastics.com or fax to: for site-wide or enterprise-wide use. Pricing is as follows:
+44 (0)117 311 1534
Prices might be subject to exchange rate USD EUR
fluctuations - check our website Currency USD EUR
for latest prices
Select version required Hard copy report only : 2,750 2,500
Hard copy report only: q 2,750 2,500
Hard copy + PDF (site-wide licence): q 4,000 3,650 Hard copy + PDF
Hard copy + PDF (Enterprise-wide license): q 5,500 5,000 with site-wide license: 4,000 3,650
Select currency: $ q €q Amount to pay:
Hard copy + PDF
Your details with enterprise-wide license: 5,500 5,000
Name: _______________________________________________________
AMI Consulting’s data reports are the result of many years of
Position:______________________________________________________
research and analysis of the plastics industry and as such are
e-mail: ______________________________________________________
protected by international copyright law. The hard copy of the
Company: ____________________________________________________ report may be stored in a company library or archive for use by
Address:______________________________________________________ personnel within that organisation. If purchasing a hard copy only,
it may not be reproduced, copied or stored within an electronic
____________________________________________________________
retrieval system. Users requiring to use the report in electronic
____________________________________________________________ format should apply for site-wide or enterprise-wide license
VAT Registration No:____________________________________________ depending on their need.
(all companies within the EU must quote their VAT numbers)
Products supplied digitally are licensed and the purchaser is
Telephone No: __________________Fax:___________________________
responsible for ensuring that license terms are adhered to. The PDF
Company Activity: _____________________________________________ is supplied watermarked with the company and purchasers name.
Signature: ____________________Date:__________________________ The terms of the license agreements are as follows:
Site license: The PDF is supplied for the purchaser’s use within a single
geographic location. The PDF may be stored on the company’s local
Payment details area network as long as the network is limited to one physical site.
Please tick box for desired payment option. You will be sent an invoice in The PDF is supplied printable, non-editable, non-copyable. The PDF
7-14 working days.
must not be emailed outside of the location, posted to the internet
q US Dollar Payments Bank transfer quoting: Your Invoice and A/C or disseminated in any form outside of the site location.
No. or ‘Applied Market Information Ltd.- Polymer Demand in Africa’ to:
National Westminster Bank Plc,Thornbury Branch, 16 The Plain, Thornbury,
Bristol BS99 5HD Enterprise-wide license: The PDF is supplied for use by all employees
Account number: 140 0 034 20760 Bank No. 55 61 38 of a single organisation. The PDF may be stored on a enterprise-wide
IBAN: GB62 NWBK 6073 0103 420760 SWIFT: NWBKGB2L intranet. The PDF is supplied printable, non-editable, non-copyable.
The PDF must not be emailed outside of the organisation, posted
q Euro Payments Bank transfer quoting: Your Invoice and A/C No. to the internet or disseminated in any form to any persons not
or ‘Applied Market Information Ltd. - Polymer Demand in Africa’ to:
employed by the organisation.
National Westminster Bank Plc. Thornbury Branch, 16 the Plain, Thornbury,
Bristol, BS99 5HD
Account number: 06814077 Bank No. 556138 AMI Consulting
IBAN: GB63 NWBK 6072 0306 8140 77 SWIFT: NWBKGB2L
This report has been compiled by AMI Consulting, the consulting
q Pay by Credit Card division of Applied Market Information Ltd., which is constantly
We accept: Visa / Mastercard / Maestro/ JCB monitoring and analysing trends in the global plastics markets.
Please provide your contact details and we will send you a link to
AMI Consulting can offer a range of business services and
a secure payment gateway via email.
analysis to the plastics industry. For further information please see
our web site.
Name:___________________________________________________
Email:___________________________________________________ www.amiplastics.com or call us on +44 117 924 9442
Please return the completed order form by post or fax to:
APPLIED MARKET INFORMATION LTD,
6 Pritchard Street, Tel: +44 (0)117 924 9442 e-mail: sales@amiplastics.com
Bristol BS2 8HR, United Kingdom Fax: +44 (0)117 311 1534 www.amiplastics.comYou can also read
