TEST SOLUTIONS FOR ELECTRIC VEHICLES AND THE E-MOBILITY APPLICATIONS - PPST Solutions
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
TEST SOLUTIONS FOR ELEC TRIC VEHICLES
AND THE E-MOBILIT Y APPLICATIONS
Caltest Instruments GmbH | Kohlmattstraße 7 | D-77876 Kappelrodeck | Tel.: +49 7842 99722 00 | Fax. +49 7842 99722 29 | www.caltest.de
Professional high-tech products for qualification, validation and final testing of
electronic components in the field of e-mobility.
AC-sources, Grid Simulation Electronic AC and DC loads
Regenerative AC -sources Regenerative AC and DC loads
DC-power supplies Battery testsystems
Battery emulators AC&DC power supplies
Bidirectional DC power supply Test Systems
High power-source/sink systems
PPST Solutions | 17711 Mitchell North | Irvine CA 92614 | Tel.: +1 888.239.1619 | Fax. +1 949.756.0838 | www.ppstsolutions.com
E-MOBILITY COMPONENTS
Charging cable
Charging station
AC-Grid Connectors
Wireless charging
Smart Grid Fuses, Relays,
Charging infrastructure
Breakers
»» AC/DC Sources »» AC/DC Sources »» AC Sources
»» Grid Simulators »» AC Loads »» AC Loads
»» DC Loads »» DC Power supplies
»» DC Loads
»» Current Sources
FREQUENCY
DC-LOADS CONVERTER
AC-LOADS
Regenerative
SOURCE/ GRID-
SINK SIMULATOR
PPST Solutions offers a full range of AC and DC Power Solutions.
Generate and load with AC | Generate and load with DC | Generate and load with AC+DC
E-MOBILITY TEST SOLUTIONS
PPST Solutions offers a complete range of AC and DC solutions:
»» Source and Sink AC Power
»» Source and Sink DC Power
On Board DC-DC Battery Electric
Inverter
Charger converter Fuel cell motor
»» AC/DC Sources »» DC Power »» Battery Test- »» Battery »» AC Sources
»» DC Loads Supplies Systems Emulators
»» DC-loads »» DC Power »» AC Loads
Supplies
»» DC Loads
AC&DC- DC-POWER SUPPLIES AC-SOURCES
SOURCES
Regenerative
POWER- BATTERY-
SUPPLIES TESTSYSTEMS
PPST Solutions offers a full range of AC and DC Power Solutions.
Generate and load with AC | Generate and load with DC | Generate and load with AC+DCProgrammable AC/DC-sources
Grid emulation DC-power supplies
Regenerative Regenerative
Linear and switching 1-, 3-phase AC Sour- Programmable DC-power supplies as tab-
ces and Regenerative 4-quadrant Voltage letop and desktop versions as well as 19“
Sources professional versions and high power DC
power supplies
»» 1- and 3-phase, DC, 15-5000Hz
»» 0-1000VACrms and 0-1 MVA/MW »» 0 up to 1500VDC/0-480kW
»» Sine only Frequency Changers (50/60Hz) »» Auto-Ranging
»» Arbitrary Waveform Models »» 19“ sources, power cabinets
»» Test sequences for normative tests according »» Multichannel
to IEC61000-4-xx »» Regenerative
»» Regenerative (4-quadrant) »» Constant power
»» AC Voltage Amplifier for PHIL applications »» With integrated function generator
»» High current versions available
DCS Series DC power from APS
AFX-Series from Pacific Power Source
The AFX-Series from Pacific Power Source is used for DC Power Supplies from APS in combination with the
grid emulation for example to test charging stations. regenerative 6RL load systems can be used to emulate
This is possible due to the floating output as well as the voltage of the vehicle, to test the charging stations
programming your own test routines with the included and for DC-DC inverter tests.
software.
We also offer specific system integration for your
AFX Series from Pacific Power Source testing needs.
»» 1 and 3 phase, 6kVA up to 150kVA
»» Frequency: 15-1200Hz (1Hz - 3kHz optional) NEW
»» Operation modes: AC, DC, AC+DC, DC+AC DCS Series from Adaptive Power Systems
»» Voltage: Single voltage range with constant current, »» Auto-Ranging up to 1500V and 15kW in 3U
0-333Vac / 425Vdc »» Expandable up to 480kW
»» Sine and Arbitrary »» Wide variation of interfaces
»» LAN (LXI™), RS232, USB, GPIB »» Cabinet Systems for higher power available
»» Harmonic waveform synthesis and analysis
»» Programmable output impedance
»» Not Regenerative
More information on our website www.ppstsolutions.comElectronic DC-loads Battery testsystems
Regenerative Regenerative
Electronic DC-loads as tabletop and desk- Full solutions for cell-, module- and pack-
top versions - Modular and multichannel, testing. The regenerative Test Systems can
high power and regenerative be used as battery emulators as well
»» 0-1500VDC »» Up to 1500V/4MW
»» 0-240kW »» Multichannel
»» Can be connected in parallel »» Complete solutions with software
»» CC,CP,CR,CV »» Optional EIS, temperature and pressure mea-
»» Regenerative surements
»» Regenerative
6RL Series Regenerative DC Loads
B2C+ Series from
Cinergia
The 6RL-Series from APS is an advanced regenera- Cinegia‘s B2C+-Series offers system solutions to va-
tive DC load that offers an wide AC-Input range to in- lidate and test high-power energy storage systems. The
clude common industry grids with 400V or 480V and B2C+ Systems are fully regenerative and can be used in
three-phase voltage. an 2-quadrant operating mode or an emulation mode.
The 6RL-Series from Adaptive Power Systems B2C+ Series from Cinergia
»» AC-Input 360-528V, for 400V and 480V grids »» 1 and 3 Output Channel Modes
»» Return of the absorbed DC-Power to the local grid »» 7,5kW up to 160kW, can be connected in parallel
»» Galvanically isolated DC input »» 1 Channel Output up to ±555Adc
»» Power input up to 15kW per device, expandable up »» 3 Channel Output up to ±185Adc/channel
to 240kW »» Operating modes: CV, CC, CP
»» Voltage input up to 1500V »» Galvanic isolation
»» Current input up to 510A per device
»» FPGA-based, digital controlling
»» Higher Power Cabinet Load Systems Available
More information on our website www.ppstsolutions.comHigh Power Source & Sink Electronic AC-loads
Regenerative Regenerative
Bi-polar and 4-quadrant DC-power 1-/3-phase electronic AC-loads as tabletop,
supplies 19“ and cabinet versions
»» 0-1200VDC/4MW »» 1- and 3-phase
»» Constant power version »» 0-480V/0-200kVA
»» 4-quadrant optional »» Can be connected in parallel
»» 19“ sources, cabinets »» CC, CI, CZ, CR, CP
»» Multichannel »» Optional AC and DC
»» Modular architecture, can be connected in pa- »» Regenerative
rallel »» AC-Current amplifier for PHIL-applications
»» Specific versions available
»» With ISO-guard, redundant safety circuit, out-
put relay
EL+vAC Series from
Cinergia
AL-3000R Series from Zenone
Zenone‘s AL-3000R Series is being used for static con- Cinergia offers a wide variety of AC, DC or AC&DC
ditions on battery emulation with fast rise timesCurrent sources AUTOMATED TEST EQUIPMENT
AC&DC current sources for thermal and
magnetical trip test, heating test and high
current calibration.
»» 1- and 3-phase
»» Up to 50kA
»» Continuous operating mode
»» Pulsed operating mode
»» DC, 10-1000Hz
»» Can be connected in parallel
»» Regenerative
GIS Series Fully Automated EV Cable Test
from ZENONE Station using LabView
Current sources can be used to perform relay tests Developing fully automated ATE stations for E-Mo-
and trip tests of fuses and circuit breakers. They are bility applications is made easier using insturment
also perfect to testing high current EV charging ca- drivers for test equipment used. PPST Solutions
bles. The frequency range is scalable from DC..10Hz partners provide LabView drivers for most instru-
up to .1000Hz. ments categories listed here.
Our partner ZENONE has a lot of experience in We can also refer you to system integrators that
this test area and offers customized test solu- specialize in custom test system development
tions as well. as needed.
GIS Series: For AC&DC high current test applica-
tions
»» Current up to 5000A
»» Power up to 200kVA
»» 3-phase configuration is also available
»» Software and sequencing programming inclu-
ded
More information on our website www.ppstsolutions.comWe are experts in the field of power conversion and electronic test instru-
mentation and offer you the best in power supplies, electronic loads and
Test & Measurement devices in the field of e-mobility. From the charging
infrastructure to the high-voltage battery.
We’ve got what you need.
Professional power supplies, loads & Strong partners
Test-Instrumentation Our partners and suppliers are recognized
Our products and solutions are used in R&D, leaders in the field of power conversion and
quality inspection, on-site test, inline test, ser- test&measurement instrumentation.
vice and maintenance in the following indus-
tries: Expertise and manufacturer‘s support allow us PPST Solutions, Inc.
»» E-Mobility to offer our customers high quality and afford-
Sales: USA, Canada, Mexico
»» Avionics and space able products and solutions.
»» Industrial and medical electronics 17711 Mitchell North
Irvine, CA 92614-6028
»» Household appliances and lightning Service & Calibration
»» Automotive and railway We offer in-house service and support as well as Tel: +1-949.239.1619
»» Test and measurement professional training and commissioning. Fax: +1-949.756.0838
Mail: info@ppstsolutions.com
»» IT and Telecom
www.ppstsolutions.com
»» EMC Compliance and Safety test labs Equipment rentals and RMA service for repairs
»» Alternative energy and smart grids and calibration complete our range.
»» Electrical power industry
System integration - Special
Technical sales engineers solutions
Our technical sales engineers are here for you You haven‘t found a device according to your
and apply their expertise to: needs? We also offer individual solutions. Addi-
»» Analyse your specifications and require- tionally to the listed products we offer customi-
ments zed devices and testsystems specially fitted to
»» Study your exact needs and find the best your needs.
technically and commercially available
solution
»» Demonstrate test equipment on site as
needed
Our partners
E-Mobility Flyer | © PPST Solutions | Version: February 2019 | Changes, printing errors and technical alterations reserved | Cover: ©istockphotos/RapidEye
EMobility-App-0219You can also read
