GARAGE EQUIPMENT Recommended by Daimler AG for the Mercedes, Smart and Mercedes-Maybach brands - Hofmann equipment
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
GARAGE EQUIPMENT Recommended by Daimler AG for the Mercedes, Smart and Mercedes-Maybach brands
geoliner ®
WHEEL ALIGNER
WHEEL ALIGNMENT SYSTEMS
Wireless system provides 3D WHEEL ALIGNER
flexible installation,
usage and mobility options geoliner® 790 MB-1
The geoliner 790 MB-1 is designed to assist the To operate the MKS the targets are to be attached to MKS
technician in providing quality alignment measurement holders which are part of the Daimler AG approved lift.
and adjustments in full compliance with the Daimler AG Following the MKS procedure in the software of the
recommended processes. geoliner 790 MB-1 the system makes sure that the
It is designed to work with the Daimler AG “Messplatz measuring bay and aligner are working to the Daimler AG
Kontrollsystem”, MKS, which is obligatory for every specifications and are properly adjusted.
Daimler AG workshop.
FEATURES
In addition the worker has the possibility to quickly ensure
and prove to the customer the permanent accuracy of the
wheel aligner and to check the complete working area.
With the already included software feature “Rack-Check” –
UNIQUE FEATURE
Working with new sophisticated multiple suspensions in
modern vehicles the accuracy of measurement gets more
and more important. The current wheel aligner generation
fulfills all those requirements and is using the latest IT
technology. A wheel aligner is a future-proof investment
and helps the workshop to constantly improve its quality.
But how can the worker easily make sure day by
day that his wheel aligner is working properly and
GET A COMPLETE PICTURE OF THE CONDITION OF
according to the given specs. And how can he show it
YOUR VEHICLE IN LESS THAN 2 MINUTES!
to his customers?
The already included software offers the worker a very
good additional tool to check the root cause of possible Cross-diagonal and Rolling Radius
measurement deviations. Cross-diagonal measurements identify frame or structural
damage. Rolling Radius identifies mismatched tyre sizes, a
Check all points that could negatively influence the potential cause of vehicle pulling and drive train damage.
accuracy and repeatability of measurement:
• Rack OPTIONAL
• Hardware parts ACCESSORIES
• Turnplates Mobility kit:
• Surrounding EAK0305J78A Includes:
Portable Platform for
You just need to invest in the Rack-Check Target. Towers and Docking
The software features is already there! Cleats for Portable
EAK0320J69A Rack-Check target KIT Platform
Features described above are not available in all models.
Please refer to the specific model page to identify its features.
3
geoliner® geoliner®
Top of accuracy with bluetooth communication 790 MB-1 3D car wheel aligner 680-MB
GEN II
The Hofmann geoliner 790 MB-1 is designed specifically to meet the needs of the Daimler AG In addition to the advantages of 3D alignment like high accuracy and impressive speed, the
operating concept, available exclusively to Daimler AG repair centers. It is designed to assist the geoliner® 680-MB Gen II is equipped with 20" TFT wide-screen monitor and features constant
technician in provide quality alignment measurement and adjustments in full compliance with the measurement of camber, caster and toe.
OEM recommended processes.
Product description Product description
• Self-calibrating multiple times a second • MB specs updated via the Daimler AG Network • Movable camera beam support (lift - work level 0 - 2.0 m) • On-line help with 3D animated graphics
• Ultra high resolution cameras to image the four targets on • Comprehensive measurement features such as automatic • Mobile terminal with colour printer and PC, plus additional • EZ Toe® for easy and convenient settings at maximum
the wheels caster sweep, rolling radius, cross diagonal measurement, storage space steering angle
• 3-Camera design A-arm adjust, cradle adjust and EZ Toe for easy toe • Set of 4 targets with wheel clamps 11" - 22" • Compatible with asanetwork
• Easy installation and flexible configuration adjustment of adjustment points difficult to access • PC with Windows operating systemand premium user • Cordless communication between targets and camera system
• Professional results and high productivity software for Daimler AG • Optional TIP (Target Imaging Pointer) for ride height
• Mobile control terminal and 27" flat-screen monitor • Simple operation and quick accurate measured results measurement
• Light weight targets • Complete and up-to-date OEM specs incl. MB data • Standard accessories: Steering wheel holder, brake pedal
• Rim clamping range 11" - 22" • Integrated MB procedures lock, IR remote control, MB mechanical turntables, roll-
• Pro42 user software: a high-resolution ICON-based software • Measurement screen with all relevant data back kit, ROMESS bracket, MB adaptor for MKS system, MB
program, with integrated MB procedures • Advanced measurement of vehicle dimensions- live documentation
• Complete and up-to-date vehicle specs
(MB and non-MB vehicles)
DigismartTM Technik
Wireless system provides flexible installation
and usage options. Patented digital camera
tracking automatically adjusts to the height of
the vehicle.
Technical Specifications geoliner® 790 MB-1 Technical Specifications monty® 680-MB GEN II
Track Width 1220 mm – 2440 mm Track width 1220 mm – 2440 mm
Wheel Base 2010 mm – 4570 mm Wheelbase 2010 mm – 4570 mm
Shipping Weight 227 kg Shipping weight 202 kg
Power Requirements 230 V 1 ph 50-60 Hz Power requirements 230 V 1 ph 50–60 Hz
4 5
monty ®
TYRE
TYRE CHANGERS
CHANGERS
wdk certified for
best performance
monty ®
quadriga 1
monty®
TYRE CHANGERS
TYRE CHANGERS Automatic tyre changer
quadriga 1 GP
FEATURES The automatic tyre changer for high-volume shops, combining automatic procedures with
utmost safety and ease of use. With top-side bead seating kit. WDK certified.
Product description
• Certified by WDK • Hydraulic clamping of wheel via center post clamping flange
• Non-contact detection of rim contour by laser • Dynamic bead breaker with two discs automatically operated
• Automatic control of mounting and demounting tools, user by the machine
only has to start operation on the control console • Integrated bead pusher
• Automatic labour-saving and accurate positioning of wheels • With pedal-controlled inflation via bead blast device
smartSpeed™ THE DANGER ZONE Pneumatic vertical arm on clamping flange by means of wheel lift • Top-side bead seating kit
The innovative technology – patent-protected – Fast and ergonomic: the pneumatic vertical arm • For rims of 12" - 30"
that optimises the torque applied to the wheel and facilitates positioning of the mounting head on all
automatically sets the maximum rotation speed of the wheels.
wheel accordingly.
Technical Specifications monty® quadriga
Clamping range 12"-30"
Max. wheel width 17"
Max. wheel diameter 47" (1200 mm)
Centre clamp Leverless tool
The centre-clamp design has numerous benefits: most The leverless tool supersedes the conventional tyre Tool vertical positioning Electrical
important is the drastically reduced risk of damage lever. It pulls the bead over the rim edge, being as Bead breaker range
and that there are no restrictions of the turntables with gentle to the tyre as can be and and reducing the Breaking force 11,5 kN (2585 lbs)
clamping jaws, while automatic locking of the wheel effort of the operator. "CW 7 - 14 rpm
provides fast, safe and correct clamping of the wheel. Rotation speed
CCW 7 rpm"
Max. torque 1500 Nm
Standard power supply 230V 1ph 50-60Hz 16A
Air pressure required 8-12 bar
Maximum dimensions
1350x2240x1850 mm
(W x D x H)
Machine weight 820 kg
Features monty® quadriga
Automatic mounting demounting cycle ESDB™ (Electronic sync dual bead-breaker)
Facilitates all mounting and demounting operations. Wheel clamp Hydraulic center post
The unique dual-disc bead breaker with servo drive.
It makes operations with run-flat tyres and UHP tyres Bead breaker Dynamic two discs
Bead breaking in an upright position: faster, easier,
easy. ergonomic and effortless. The bead roller is applied to Chuck speed control Inverter
detach both soft and stiff beads. Wheel lift Standard
Features described above are not available in all models.
Please refer to the specific model page to identify its features. 9
monty® monty®
The tyre changer of choice for high 8800s Tyre changer of choice for high 8700b
volume tyre shops performance tyres
The monty® 8800s smartSpeed™, which combines the high productivity features of a Semi-automatic tyre changers with powerMONT™ leverless technology
tabletop model and the high performances of a leverless tyre changer.
With on floor bead breaker. wdk certified.
Product description Product description
• Excellent with low-profile, UHP and run-flat tyres, high • Optimum bead breaker system: the most performing solution • The tyre changer of choice for low-profile, UHP and • PBD330, Pneumatic Bead Depressor for convenient
performing with tyres with high aspect ratio too for any tyre’s types: run-flat tyres demounting of hard sidewall tyres
• powerMONT™ the innovative, fast and easy to use leverless • Dynamic bead breaker with two disks, the solution of choice • powerMONT™ the innovative, fast and easy to use leverless • High rigidity for a safe handling of high performance tyres
mount/demount system for RFT and UHP tyres. Precise, ergonomic and effortless mount/demount system • Pedal-controlled inflator
• quickLOK™ automatic center post clamping system • On floor bead breaker, the fastest solution for tyres with • smartSpeed™ the exclusive self-adjustable speed system • Mirror to control operation on the lower bead
• smartSpeed™ the exclusive self-adjustable speed system high aspect ratio up to 20 rpm that provides the optimum torque/speed • Ergonomic wheel lift as option
up to 20 rpm that provides the optimum torque/speed • High rigidity for a safe handling of high performance tyres combination to the chuck • Certified by wdk
combination to the chuck • Pedal-controlled inflator • Dynamic bead breaker with two disks, the solution of choice
• PBD330, Pneumatic Bead Depressor for convenient • Ergonomic wheel lift (option) for RFT and UHP tyres. Precise, ergonomic and effortless
demounting of hard sidewall tyres • Mirror to control operation on the lower bead • Manual center post clamping system
monty® 8800s monty® 8700b
Technical Specifications Technical Specifications
smartSpeed smartSpeed
Clamping range 12"-30" Clamping range 12"-30"
Max. wheel width 380 mm Max. wheel width 380 mm
Max. wheel diameter 47'' Max. wheel diameter 47''
Tool vertical positioning Pneumatic Tool vertical positioning Pneumatic
Bead breaker range 717 mm Bead breaker range 717 mm
Breaking force 11,5 kN Breaking force 11,5 kN
Rotation speed CW 7 - 20 rpm Rotation speed CW 7 - 20 rpm
Max. torque 1200 Nm Max. torque 1200 Nm
Standard power supply 230V 1ph 50-60Hz 16A Standard power supply 230V 1ph 50-60Hz 16A
Air pressure required 8-12 bar Air pressure required 8-12 bar
Maximum dimensions Maximum dimensions
1481 x 1863 x 1880 mm 1481 x 1863 x 1880 mm
(W x D x H) (W x D x H)
Machine weight 465 kg Machine weight 500 kg
monty® 8800s monty® 8700b
Features Features
smartSpeed smartSpeed
Wheel clamp Center post Wheel clamp Center post
Bead breaker Dynamic and On floor Bead breaker Dynamic
Chuck speed control smartSpeed™ Chuck speed control smartSpeed™
Wheel lift option Wheel lift option
10 11
monty® monty®
Tyre changer for wheel width up to 15" 3300 Racing Pneumatic tilt-back post tyre changer with 3300-24
and smartSpeed™ technology smartSpeed™ technology
plus plus
The tyre changer for use in high-volume tyre shops and car dealerships - with pneumatic (GP version) The tyre changer for use in general service shops and tyre shops with high tyre service (GP version)
tilt-back post, 24“ outside clamping capability, 15“ maximum wheel width and smartSpeed™ volume - with pneumatic tilt-back post, 24“ outside clamping capability and smartSpeed™
technology. With top-side bead seating kit. WDK certified. technology. With top-side bead seating kit. WDK certified.
Product description Product description
• Certified by wdk for gentle and user-friendly mounting and • Turntable with centre-type sliding jaws. Two clamping • Certified by wdk for gentle and user-friendly mounting and • Mounting head adjustable in spaced-apart position relative to
demounting of UHP and run-flat tyres in line with OEM cylinders provide 30 to 40 % more clamping force than single- demounting of UHP and run-flat tyres in line with OEM the rim
specifications cylinder machines specifications • Self-centring four-jaw turntable
• With pneumatic mounting tool easyMONT® pro and plus kit • Pedal-operated pneumatic tilt-back post • With pneumatic mounting tool easyMONT® pro and plus kit • Plastic protection inside jaws and on mounting head to avoid
(standard equipment) for handling of UHP and run-flat tyre systems • Post pneumatically locked in working position (standard equipment) for handling of UHP and run-flat tyre damage to alloy rims
• smartSpeed™ – the new exclusive self-adjustable speed • On-floor bead breaker with adjustable blade inclination for systems • Pedal-operated tyre inflator with pressure gauge fitted in the
system with inverter technology different wheel diameters, adjustable in three positions to • smartSpeed™ – the new exclusive self-adjustable speed toolbox
• Double-acting bead breaker cylinder grant high performance and flexibility system with inverter technology • Quick-inflating valve
• Mounting head adjustable in spaced-apart position relative to • Tool box with integrated pressure gauge and four ergonomic • Sliding jaws with rounded profile and plastic protection inside • With top-side bead seating kit
the rim shelves for valves, tools and accessories, attached on offer an outer clamping range of 10" to 24", reduced clamping • Outer clamping range up to 24"
• Vertical positioning of the mounting head is carried out separate tower time and increased clamping force owing to cylinder with • Pedal-operated pneumatic tilt-back post
pneumatically, too - all settings are controlled through a • Pedal-operated inflator shorter stroke • Post pneumatically locked in working position
single switch - quickly and ergonomically • Quick-inflating valve • Tool box with integrated pressure gauge and four ergonomic • Bead breaker adjustable in 3 positions
• Sliding jaws with rounded profile and plastic protection inside offer • With top-side bead seating kit shelves for valves, tools and accessories, attached on • Capable of mounting / demounting the majority of wheel
an outer clamping range of 10" to 24", reduced clamping time and • Low cabinet offers an ergonomic height even with very wide wheels separate tower assemblies in the market
increased clamping force owing to cylinder with shorter stroke • Maximum wheel width of 15" covers all current OEM wheels • Double-acting bead breaker cylinder • Optional wheel lift CW1015
• Conventional mounting / demounting tool (working range 8" in the market
- 24") with steel mounting head and plastic inserts for gentle
operation on wheels
monty® 3300-24
Technical Specifications
smartSpeed plus
Clamping range 10"-24"
monty® 3300 racing
Technical Specifications Max. wheel width 13"
smartSpeed plus
Clamping range 10"-24" Max. wheel diameter 39.4" (1000 mm)
Max. wheel width 15" Tool vertical positioning Manual
Max. wheel diameter 39.4" (1000 mm) Bead breaker range 40-392 mm
Tool vertical positioning Pneumatic Breaking force 12 kN
Bead breaker range 40-392 mm CW 7 - 18 rpm
Rotation speed
CCW 7 rpm
Breaking force 12 kN
Max. torque 1200 Nm
"CW 7 - 18 rpm
Rotation speed Standard power supply 230V 1ph 50-60Hz 16A
CCW 7 rpm"
Max. torque 1200 Nm Air pressure required 8-12 bar
Standard power supply 230V 1ph 50-60Hz 16A Maximum dimensions
1900 x 1600 x 1850 mm
(W x D x H)
Air pressure required 8-12 bar
Machine weight 310 kg
Maximum dimensions
1920 x 1615 x 1685 mm
(W x D x H)
Machine weight 310 kg
monty® 3300-24
Features
monty 3300 racing
® smartSpeed plus
Features
smartSpeed plus Wheel clamp Jaws
Wheel clamp Jaws Bead breaker On floor
Bead breaker On floor Chuck speed control smartSpeed™
Chuck speed control smartSpeed™ Wheel lift Option - CW1015
Wheel lift Option - CW1015
12 13
® WHEEL BALANCERS Balancing technology at its finest
®
WHEEL BALANCERS
FEATURES
Daimler AG - Kit of centring collets Smart Sonar™ Rim scanner
MB kit is delivered as standard accessory with all Daimler AG balancers: Automatic, non-contact rim width acquisition delivers The rim scanner automatically detects rim diameter
• Centring ring D66.42-66.5 / 84 mm for A/B/C/E/R/S/M/V class, SLK / Vaneo / Viano / Vito, G models / Sprinter / Series 200, 300 greater accuracy and ease of use for a 30% savings and offset as well as the number and position of rim
• Centring ring D57 / 60 mm for Smart, Citan in complete process when compared to manual spokes. Then it automatically chooses balancing
• Centring ring D161 mm for light truck series 400, 500, 600, 700 / T1 / T2 / Sprinter 3500 operation. mode, weight types and weight positions.
VPM measurement technique QuickBAL™ easyWEIGHT™ geoTOUCH™
Vibratory system for high precision and repeatability. 30% reduced cycle time, less than 4,5 seconds, Pinpoint laser identifies exact weight placement Reliable as a digital display and intuitive as a
(All models) maintaining the same high accuracy. location for increased accuracy and efficiency. touchscreen monitor user interface. Large digits and
high contrast.
Power Clamp™ easyALU™ Stop in position Multiple users
Patented automatic Power Clamp™ electromechanical Touch the rim with the gauge arm to enter the rim Touch the screen to automatically rotate the wheel to Two operators can operate with the balancer
clamps the wheel accurately with a constant force, dimensions and automatically select the weight weight application position. simultaneously and quickly recall their rim
reducing the opportunity for chasing weight. balancing mode. dimensions.
Features described above are not available in all models.
Please refer to the specific model page to identify its features. 17
Car wheel balancer with non-contact data
Diagnostic car wheel balancer with touch geodyna® entry, diagnostic functions and automatic geodyna®
screen and 3D camera technology 9000p wheel lift 8250-2p
The diagnostic wheel balancer for high-end tyre shops, car dealerships and garages, tuning The wheel balancer with diagnostic functions for tyre shops, garages and car dealerships with
shops and car manufacturers. With 3D camera technology: 5 CCD cameras scan tyre and rim from high tyre service volume. With touchscreen monitor, non-contact data entry and diagnostic
different directions with special 3D laser stripes. In a single measuring run all data is detected functions. Unbalance measurement and run-out diagnosis are performed in a single fast
and possible defects in tyre or rim are diagnosed and documented with utmost accuracy. measuring run. The integrated wheel lift automatically lifts a wheel to the last preset height.
Product description Product description
• Measurement of tyre pull effect (tyre conicity) • Print-out of all results in test records, or screenshots via • BW4030 – the ultimate wheel lift for wheel balancers, integrated Pinpoint laser light indicator to accurately position adhesive
• Detection of flat spots on the tyre remote printer. Output also to USB memory stick. in the cabinet, operated by the balancer's logic, automatically weights on the wheel
• Detection of possible damage to tyre sidewall • Documentation of the condition of a set of wheels lifting a wheel of the same set to the correct height and • Semi-automatic selection of balancing mode with easyALU™
• Checking of bead seat • Patented virtual plane measurement (VPM) technique consequently improving centring and clamping of the wheel in combination with the geodata gauge arm
• Measurement of radial and lateral run-out of tyre and/or rim • Automatic non-contact acquisition of wheel data and • High-productivity wheel balancer • Torque-controlled Power Clamp™ device – fast and accurate
• Tread depth measurement in 5 different positions and balancing mode (weight type and position) • Rim Scanner™ for: clamping of the wheel
visualisation on screen • Automatic non-contact identification of number and position - automatic non-contact rim profiling • Stop-in-Position feature where the operator only has to touch
• Tread wear analysis (signalling need for wheel alignment) of spokes for split-weight mode - automatic selection of balancing mode and weight position the amount of unbalance on the screen and the wheel is
• Allocation of wheels to their best possible position on the vehicle • Diagnostics of unsmooth ride and optimisation in a single - automatic acquisition of rim diameter and offset automatically indexed to correction position
in order to avoid tyre pull effect (OptiLine function - optional) additional step • Smart Sonar™ for automatic non-contact acquisition of rim width • QuickBAL™ for reduced measurement time: short start-stop
• User-friendly touch screen monitor for visualisation of the • Electro-mechanical Power Clamp™ device for accurate • Run-out diagnosis combined with unbalance measurement in cycle time: 4.5 seconds (15’’ rim)
diagnostic results in brilliant 3D colour maps clamping and centring of the wheel a single fast measuring run • VPM measurement technique for uncompromised accuracy
• Graphical user interface PLATINUM for intuitive user- • asanetwork capability via optional software client • Recommendation for match-mounting, when possible, to • Telescopic wheel guard – requiring no additional back space
machine communication and high-productivity diagnostic reduce vibrations caused by radial run-out • Imbalance minimisation and optimisation programs
wheel balancing • Touchscreen monitor with graphical user interface PLATINUM • Compatible with asanetwork
– fast and very intuitive • Print-out with optional printer
• easyWEIGHT™: fast pinpoint bottom weight placement.
Technical Specifications geodyna® 9000p Technical Specifications geodyna® 8250-2p
Measuring speed < 200 rpm Measuring speed < 200 rpm
Balancing accuracy 1g Balancing accuracy 1g
Angular resolution ± 0.35° Angular resolution ± 0.35°
Start/Stop cycle 4.5 s Start/Stop cycle 4.5 s
Diameter of shaft 40 mm Diameter of shaft 40 mm
Length of shaft 225 mm Length of shaft 225 mm
Wheel lift max. load n.a. Wheel lift max. load 70 kg
Power supply 230 V 1ph 50/60 Hz Power supply 230 V 1ph 50/60 Hz
Dimensions L x W x H Dimensions L x W x H
1450 x 990 x 1710 mm 1940 x 1020 x1570 mm
(Wheel guard open) (Wheel guard open)
Net weight 210 kg Net weight 183 kg
Features geodyna® 9000p Features geodyna® 8250-2p
Display Monitor 19" Display geoTOUCH™
Touchscreen Yes Touchscreen Yes
Wheel clamp Power Clamp™ Wheel clamp Power Clamp™
Dimension entry Dimension entry
3D Camera Rim Scanner™
(Diameter & distance) (Diameter & distance)
Dimension entry Dimension entry
3D Camera Smart Sonar™
(Rim width) (Rim width)
Stop in position Yes Stop in position Yes
Laser pointer for tape Laser pointer for tape
easyWEIGHT™ easyWEIGHT™
weights weights
Rim Lighting Yes Rim Lighting Yes
Wheel lift - Wheel lift Standard BW4030
Diagnostic features Full diagnostic Diagnostic features Run-out & matching
18 19Car wheel balancer with non-contact data
geodyna® Digital car wheel balancer with geoTOUCH™ geodyna®
entry and diagnostic functions 8200-2p Display, geodata® and automatic wheel lift 7750p
The wheel balancer with diagnostic functions for tyre shops, garages and car dealerships with The wheel balancer for tyre shops, car dealerships and garages with high tyre service volume.
high tyre service volume. With touchscreen monitor, non-contact data entry and diagnostic With geoTOUCH™ - the touch-screen graphical display with DIAMOND user interface – the
functions. Unbalance measurement and run-out diagnosis are performed in a single fast geodyna® 7750p is as intuitive as a video balancer. Particularly ergonomic with the automatic
measuring run. wheel lift.
Product description Product description
• High-productivity wheel balancer • Alternative positioning of adhesive weights with the geodata® • BW4030 – the ultimate wheel lift for wheel balancers, integrated • easyWEIGHT™: the pinpoint laser light indicator to accurately
• Rim scanner for: gauge arm in the cabinet, operated by the balancer's logic, automatically and conveniently position adhesive weights
- automatic non-contact rim profiling • Torque-controlled Power Clamp™ device – fast and accurate lifting a wheel of the same set to the correct height and • Semi-automatic pre-selection of balancing mode via easyALU™
- automatic selection of balancing mode and weight position clamping of the wheel consequently improving centring and clamping of the wheel • Split weight mode
- automatic acquisition of rim diameter and offset • Stop-in-Position feature where the operator only has to touch • With torque-controlled Power Clamp™ device - for shop with • Weight minimisation and optimisation
• Smart Sonar™ for automatic non-contact acquisition of rim width the amount of unbalance on the screen and the wheel is high tyre service volume • Rim lighting iLED™ - new, very bright LED technology,
• Run-out diagnosis combined with unbalance measurement in automatically indexed to correction position • geoTOUCH™ - the touchscreen graphical display, 10” wide, switched in when required
a single fast measuring run • QuickBAL™ for reduced measurement time: short start-stop with DIAMOND user interface – makes geodyna® 7750p as • Patented telescopic wheel guard – no additional space
• Recommendation for match-mounting, when possible, to cycle time: 4.5 seconds (15’’ rim) intuitive as a video balancer required behind the machine
reduce vibrations caused by radial run-out • VPM measurement technique for uncompromised accuracy • Semi-automatic input of offset and rim diameter via 2D • Two users with rapid switch function
• Touchscreen monitor with graphical user interface PLATINUM • Telescopic wheel guard – requiring no additional back space geodata® gauge arm • Network printing capability – Compatible with asanetwork
– fast and very intuitive • Imbalance minimisation and optimisation programs • Automatic rim width acquisition via Smart Sonar™ – fast and easy • WI-FI connectivity
• easyWEIGHT™: fast pinpoint bottom weight placement. • Compatible with asanetwork • Stop-in-Position: the operator only has to touch the amount • VPM measurement technique for uncompromised accuracy
Pinpoint laser light indicator to accurately position adhesive • Print-out with optional printer of unbalance on the display and the wheel is automatically • QuickBAL™ for reduced measurement time:
weights on the wheel indexed to correction position • Short start-stop cycle time: 4.5 seconds (15” rim)
Technical Specifications geodyna® 8200-2p Technical Specifications geodyna® 7750p
Measuring speed < 200 rpm Measuring speed < 200 rpm
Balancing accuracy 1g Balancing accuracy 1g
Angular resolution ± 0.35° Angular resolution ± 0.35°
Start/Stop cycle 4.5 s Start/Stop cycle 4.5 s
Diameter of shaft 40 mm Diameter of shaft 40 mm
Length of shaft 225 mm Length of shaft 225 mm
Wheel lift max. load n. a. Wheel lift max. load 70 kg
Power supply 230 V 1ph 50/60 Hz Power supply 230 V 1ph 50/60 Hz
Dimensions L x W x H Dimensions L x W x H
1380 x 1020 x1570 mm 1840 x 1020 x 1550 mm
(Wheel guard open) (Wheel guard open)
Net weight 150 kg Net weight 230 kg
Features geodyna® 8200-2p Features geodyna® 7750p
Display Monitor 19" Display geoTOUCH™
Touchscreen Yes Touchscreen Yes
Wheel clamp Power Clamp™ Wheel clamp Power Clamp™
Dimension entry Dimension entry semi-automatic
Rim Scanner™
(Diameter & distance) (Diameter & distance) geodata®
Dimension entry Dimension entry
Smart Sonar™ Smart Sonar™
(Rim width) (Rim width)
Stop in position Yes Stop in position Yes
Laser pointer for tape Laser pointer for tape
easyWEIGHT™ easyWEIGHT™
weights weights
Rim Lighting Yes Rim Lighting Yes
Wheel lift - Wheel lift Standard BW4030
Diagnostic features Run-out & matching Diagnostic features -
20 21geodyna® geodyna®
Digital car wheel balancer with geoTOUCH™ Car wheel balancer with touchscreen
display, geodata® and high ergonomics
7700p monitor and Power Clamp™ device 7600p
7700l
The wheel balancer for tyre shops, car dealerships and garages with high tyre service volume. The wheel balancer for tyre shops, car dealerships and garages with medium to high tyre
With geoTOUCH™ - the touch-screen graphical display with DIAMOND user interface. service volume: with touchscreen monitor and easyWEIGHT™ pinpoint indicator light – An
accurate, fast and easy solution to position adhesive weights on the wheel.
With Power Clamp™ Device.
Product description Product description
• geoTOUCH™ - the touchscreen graphical display, 10” wide, • Split weight mode • Touchscreen monitor with graphical user interface GOLD – • Semi-automatic pre-selection of balancing mode via easyALU ™
with DIAMOND user interface • Weight minimisation and optimisation improved intuitiveness and ergonomics • Rim lighting to facilitate rim cleaning and speed up data entry
• With torque-controlled Power Clamp™ device - for shop with • Rim lighting iLED™ - new, very bright LED technology, • With torque-controlled Power Clamp™ device instead of and weight positioning
high tyre service volume switched in when required quick nut • New ergonomic weight tray
• Semi-automatic input of offset and rim diameter via 2D • Patented telescopic wheel guard – no additional space • High-productivity wheel balancer • Imbalance minimisation and optimisation programs
geodata® gauge arm required behind the machine • easyWEIGHT™ laser light indicator for fast, accurate and • VPM measurement technique for uncompromised accuracy
• Automatic rim width acquisition via Smart Sonar™ – fast and • Two users with rapid switch function pinpoint placement of adhesive weights on the wheel • QuickBAL™ for reduced measurement time: Short start-stop
easy • Network printing capability – Compatible with asanetwork • Semi-automatic input of offset and rim diameter via 2D SAPE cycle time: 4.5 seconds (15’’ rim)
• Stop-in-Position: the operator only has to touch the amount • WI-FI connectivity and automatic rim width acquisition via Smart Sonar™
of unbalance on the display and the wheel is automatically • VPM measurement technique for uncompromised accuracy
indexed to correction position • QuickBAL™ for reduced measurement time:
• easyWEIGHT™: the pinpoint laser light indicator to accurately • Short start-stop cycle time: 4.5 seconds (15” rim)
and conveniently position adhesive weights • Clamping of wheel with the torque-controlled Power Clamp™
• Semi-automatic pre-selection of balancing mode via easyALU™ device
Technical Specifications geodyna® 7700p / l Technical Specifications geodyna® 7600p
Measuring speed < 200 rpm Measuring speed < 200 rpm
Balancing accuracy 1g Balancing accuracy 1g
Angular resolution ± 0.35° Angular resolution ± 0.35°
Start/Stop cycle 4.5 s Start/Stop cycle 4.5 s
Diameter of shaft 40 mm Diameter of shaft 40 mm
Length of shaft 225 mm Length of shaft 225 mm
Wheel lift max. load n.a. Wheel lift max. load 70 kg
Power supply 230 V 1ph 50/60 Hz Power supply 230 V 1ph 50/60 Hz
Dimensions L x W x H Dimensions L x W x H
1270 x 1020 x 1550 mm 1381 x 877 x 1834 mm
(Wheel guard open) (Wheel guard open)
Net weight 165 kg Net weight 130 kg
Features geodyna® 7700l geodyna® 7700p Features geodyna® 7600p
Display geoTOUCH™ geoTOUCH™ Display Monitor 19"
Touchscreen Yes Yes Touchscreen Yes
Power Wheel clamp Power Clamp™
Wheel clamp Quick Nut
Clamp™
Dimension entry semi-automatc
Dimension (Diameter & distance) gauge arm
semi-automatic semi-automatic
entry (Diameter
geodata® geodata® Dimension entry
& distance) Smart Sonar™
(Rim width)
Dimension entry
Smart Sonar™ Smart Sonar™ Stop in position Yes
(Rim width)
Laser pointer for tape
Stop in position - Yes easyWEIGHT™
weights
Laser pointer
easyWEIGHT™ easyWEIGHT™ Rim Lighting Yes
for tape weights
Wheel lift Optional BW2010
Rim Lighting Yes Yes
Diagnostic features -
Wheel lift - -
Diagnostic
- -
features
22 23geodyna®
®
Digital Car Wheel Balancer
7340p
7340l
With geoTOUCH™ - the touch-screen graphical display – the geodyna® 7340 is as intuitive
as a video balancer. The wheel balancer with Power Clamp™ Device and easyWEIGHT™
pinpoint laser light indicator for tyre shops, car dealerships and garages with medium tyre
service volume.
Product description
• geoTOUCH™ - the touchscreen graphical display, 10” wide, • Semi-automatic pre-selection of balancing mode via
with DIAMOND user interface – makes geodyna® 7340 as easyALU™
intuitive as a video balancer • Split weight mode
• Power Clamp™ fast and accurate clamping device • Weight minimisation and optimisation
• easyWEIGHT™: the pinpoint laser light indicator to accurately • Two users with rapid switch function
and conveniently position adhesive weights • Network printing capability – Compatible with asanetwork
• Stop-in-Position feature where the operator only has to touch • WI-FI connectivity
the amount of unbalance on the idsplay and the wheel is • VPM measurement technique for uncompromised accuracy
indexed to correction positon • QuickBAL™ for reduced measurement time: Short start-stop
• Semi-automatic input of offset and rim diameter via 2D SAPE cycle time: 4.5 seconds (15” rim)
• Automatic rim width acquisition via Smart Sonar™ – fast and easy • Clamping of wheel on integrated flange with quick nut
Technical Specifications geodyna® 7340p / l
Measuring speed < 200 rpm
Balancing accuracy 1g
Angular resolution ± 0.35°
Start/Stop cycle 4.5 s
Diameter of shaft 40 mm
Length of shaft 225 mm
Wheel lift max. load 70 kg
Power supply 230 V 1ph 50/60 Hz
Dimensions L x W x H
1383 x 878 x 1670 mm
(Wheel guard open)
Net weight 90 kg
Features geodyna® 7340l geodyna® 7340p
Display geoTOUCH™ geoTOUCH™
Touchscreen Yes Yes
Wheel clamp Quick Nut Power Clamp™
Dimension entry
semi-automatc semi-automatc
(Diameter &
gauge arm gauge arm
distance)
Dimension entry
Smart Sonar™ Smart Sonar™
(Rim width)
Stop in position - Yes
Laser pointer
easyWEIGHT™ easyWEIGHT™
for tape weights
Rim Lighting - -
Optional Optional
Wheel lift
BW2010 BW2010
Diagnostic
- -
features
24truck geodyna®
980L
truck monty®
WHEEL BALANCERS TYRE CHANGERS 4400
4800-2L 3850
The geodyna® 980L and geodyna® 4800-2L measures both the static and the dynamic portions Rugged chuck design, double reinforced frame allowing to handle wheels of up to 1500 kg,
of unbalance and consequently increases truck wheel life considerably. The geodyna® 4800-2L control unit with switch to control two operations simultaneously, 2 chuck speeds
is also equipped with TFT flat screen and asanetwork capability.
Product description Product description
• Automatic input of offset and rim diameter (2D SAPE) • Cone adaptor with spacer and light-truck cone of 120 - 170 mm • Rugged chuck design • Positioning of wheel and tool within a wide accurate
• Input of rim width by pressing of the function key and turning diameter • Double reinforced frame allowing to handle wheels of up to adjustment range
of the wheel (patented) • Gauge arm with weight clamp (patented) to enter wheel data 1500 kg • Infinitely self-centring universal hydraulic chuck
• Electronic friction brake to retain the wheel in any position and position adhesive weights • Unique patented bead breaker disc for easy operation • Bead breaker roll and mounting/demounting tool fitted
• Virtual plane measurement (VPM) technique (patented) • Hidden weight mode • Control unit with switch to control two operations on swing arm
• Weight tray with 27 weight compartments and shelves for • Optimisation (patented) simultaneously • Safety valve on chuck prevents accidental unclamping of wheels
cones and weight pliers • 19“ TFT wide-screen monitor • 2 Chuck speeds, preset with a switch • Ergonomic operation owing to vertically adjustable control unit
• Automatic braking of the wheel after measurement • Comprehensive on-line help in more than 25 languages • Vast range of standard accessories
• Automatic static and dynamic unbalance measurement in a • Asanetwork capability • Electro-hydraulic drive
single measuring run • Mobile control unit
Technical Specifications geodyna® 980l Technical Specifications geodyna® 4800-2l Technical Specifications monty® 4400 Technical Specifications monty® 3850
Diameter of shaft 40 mm Diameter of shaft 40 mm Rim clamping range 14–44 inch Rim clamping range 14–26 inch
Measuring speed < 100 rpm Measuring speed < 100 rpm Max. wheel width 43 inch Max. wheel width 27 inch
Angular resolution ± 0.35° Angular resolution ± 0.35° Max. wheel diameter 2300 mm Max. wheel diameter 1500 mm
1 g cars 1 g cars Max. wheel weight 1500 kg Max. wheel weight 1000 kg
Balancing accuracy Balancing accuracy
10 g trucks 10 g trucks
Bead breaking force 33 kN Bead breaking force 27 kN
Dimensions L x W x H Dimensions L x W x H
1920x1370x1390 mm 1920x1330x1150 mm Chuck speed (4/8 UpM) Chuck speed (1 UpM)
(Wheel guard open) (Wheel guard open)
Chuck motor rating 1.5 / 2.2 kW Chuck motor rating 1.8 kW
Net Weight 255 kg Net Weight 238 kg
Hydraulic motor rating 1.5 kW Hydraulic motor rating 1.5 kW
Wheel Lift Pneumatic (option) Wheel Lift Pneumatic (option)
Dimensions (W x D x H) 2660 x 1940 x 850 mm Dimensions (W x D x H) 1670 x 1400 x 840 mm
Weight 310 kg Weight 540 kg
Power supply 400 V 3ph 50 Hz Power supply 400 V 3ph 50 Hz
26 27testing TESTING EQUIPMENT Brake Testers
testing CAR
safelane
204-RP testing TRUCK
safelane
truck 16/20t
(K-CPS-700)
safelane
truck 16t G
Daimler AG specifies minimum requirements to be met by any brake tester sold to any of their contractual Daimler AG specifies minimum requirements to be met by any brake tester sold to any of their contractual
garages, workshops or dealerships. garages, workshops or dealerships.
Product description Product description
Basic technical equipment for passenger car brake test • Automatic on/off switching and automatic restart Basic technical equipment for commercial vehicle brake test • Automatic on/off switching and automatic restart
stands, applicable to all countries: • Standardized data interface for data transfer (e.g. USB, LAN etc.) stands, applicable to all countries: • Standardized data interface for data transfer (e.g. USB, LAN etc.)
• Lockable main switch • Pressure transducer for transmitting the measured pressures
• Roller set with a drive-over load capacity of min. 4 t / usable • Roller set ≥ Ø 250 mm, with drive-over load capacity of min. in the compressed air system
testing width 800 to 2,200 mm Optional: 16 t / usable testing width 800 to 3000 mm • Lockable main switch
• Test speeds ≥ 4 km/h • Drive-off aid • Test speeds ≥ 2 km/h • Simultaneous display
• Motor power: ca. 2x 4 kW • Pit safety system when installed in a pit • Motor power: minimal 2x 11 kW • Pit safety system when installed in a pit
• Roller set galvanized • Automatic roller brake for testing automatic vehicles • Safety circuit to reduce the start-up current
• Roller surface plastic-coated surface with coefficient of static • Roller set with rear rollers set approx. 50 mm higher Optional:
friction Tire / roll 0.7 dry / wet 0.5 Additional equipment when used for vans: • Roller set galvanized − roller surface plastic-coated surface • Automatic roller brake for testing automatic vehicles (e.g. buses)
• PC with printer for printing test logs • Roller set with a drive-over load capacity of min. 5 t / usable with coefficient of static friction • Preinstallation for tachograph testing
• Remote control for commissioning and control of brake test stand testing width 800 to 2200 mm • Tire / roll 0.7 dry / wet 0.5 • Roller set raising for load simulation
• Start lock-up safeguard • Preinstallation for tachograph testing • Single wheel circuit • Pedal force meter when used for cars
• Pedal force meter • Simultaneous display • PC with printer for printing test logs • Drive-off aid
• Switchover from Manual to Automatic mode • Weighing scale in roller set
• Remote control for commissioning and control of brake test stand Additional equipment when used for cars:
• Switchover from Manual to Automatic mode • Two test speeds ≥ 2 - > 4 km/h when used for cars
Following models correspond to these specs.:
Truck brake testers for trucks, buses and vans
over 3.5 t (N2)
• safelane truck N SC 1 1300mm 16t
• safelane truck N 1 1300mm 16t
• safelane truck N 1 1300mm 20t
• safelane truck G SC 1 16t
The following Hofmann brake testers • safelane truck G 1 16t
comply with the criteria catalogue: models with one or two measuring speeds.
• safelane 204-RP (K-CPS-700) ATTENTION
• safelane 204-RP (K-CPS-1000) with 1000 mm Versions with level rollers are not according the MB
roller lengths requirements
• safelane 204-RP (K-CPS-700-5) with 5kW motors Possible options:
• safelane 204-RP (K-CPS-1000-5) with 1000 mm weighing unit, 8-digit display, air pressure
roller lengths and 5kW motors transducer cable or radio, remote control, empty
cabinet in RAL 9007, PC, printer, COM cable, radio
Additional equipment when used for vans available. transducers e lifting load simulator, motor brakes,
Please ask your Sales Manager. pit safety device, preparation for tachograph testing
Every product, accessory or configuration with Every product, accessory or configuration with
better characteristics / performance is, of course, better characteristics / performance is, of course,
according to the Daimler AG criteria of, too. according to the Daimler AG criteria of, too.
Brake testers must be comply with country-specific Brake testers must be comply with country-specific
requirements and statutory provisions. requirements and statutory provisions.
Approvals of the local boards and supervisory Approvals of the local boards and supervisory
authorities must be obtained. At any rate local authorities must be obtained. At any rate local
approvals / requirements supersede MB criteria. approvals / requirements supersede MB criteria.
30 31EMEA-JA Italy United Kingdom
Snap-on Equipment s.r.l. Snap-on Equipment s.r.l. Snap-on Equipment Ltd.
Via Prov. Carpi, 33 Via Prov. Carpi, 33 · 42015 Correggio (RE) Unit 17 Denney Road,
42015 Correggio (RE) Phone: +39 0522 733-411 King‘s Lynn Norfolk PE30 4HG
Phone: +39 0522 733-411 Fax: +39 0522 733-410 Phone: +44 118 929-6811 Part of the machines
Fax: +39 0522 733-479 Fax: +44 118 966-4369 is illustrated with
France optional extras which
Snap-on Equipment France are available at extra
cost. Technical and
Germany ZA du Vert Galant Austria visual modifications
Snap-on Equipment GmbH 15, rue de la Guivernone Snap-on Equipment Austria GmbH reserved.
Konrad-Zuse-Straße 1 · 84579 BP 97175 Saint-Ouen-l’Aumône Hauptstrasse 24/Top 14
Unterneukirchen 95056 Cergy-Pontoise CEDEX A-2880 St. Corona/Wechsel (RE)
Phone: +49 8634 622-0 Phone: +33 134 48 58-78 Phone: +43 1 865 97 84
Cod.: 9702 872 · 12/2019
Fax: +49 8634 5501 Fax: +33 134 48 58-70 Fax: +43 1 865 97 84 29You can also read
