AUTO, CARGO, MINING September Specials 2020
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
AUTO, CARGO, MINING September Specials 2020
COVID KILLER!
NETBIOKEM DSAM COMMERCIAL GRADE DISINFECTANT CLEANER
SCIENTIFICALLY PROVEN* TO KILL SARS-COV-2 (COVID-19 VIRUS)
IN DIRTY CONDITIONS WITHIN TWO MINUTES!
Page 2 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
PROTECT YOUR STAFF & CUSTOMERS
Commercial grade disinfectant cleaner for all hard surfaces.
• Ready to use 2-in-1 solution, eliminating the need for pre-clean process.
• It provides broad-spectrum disinfection in industrial, institutional, healthcare and household settings.
• Will not harm or damage fabrics, plastic, metals, rubber, or other surfaces. It has been tested against relevant aviation material standards.
• Non-flammable and non-toxic formulation.
• Demonstrated efficacy against mould species.
3
Details/Application:
• Suitable for all transport, commercial, industrial,
METHODS
FOR PROTECTION
institutional, health services, military, and any
essential services industry.
• Complies with Aviation material standards.
Notice:
Hard surface disinfectant only. Use undiluted. Do not
1 - SPRAY
mix with detergents or other chemicals. Not to be Spray Netbiokem DSAM onto surface until
used on the skin. Not to be used on medical devices completely wet. Allow 2 minutes contact time for
or other therapeutic goods. disinfection. Wipe surface with a dry cloth.
Do not rinse.
Contents Art. No. 2 - LIQUID/WIPE
500 ml 9501 007 186 Apply Netbiokem DSAM liquid onto the wipe material
5L 9501 007 185 until wet. Wipe and leave for 2 minutes to ensure
20 L 9501 007 187 complete disinfection. Wipe surface with a dry cloth.
Tap for 20 L 0891 302 09
Cat. Pg. 04 4044 2 - FOG
All fog treatments must be carried out in empty
premises / areas with any air conditioning and
recirculation systems switch off. Ensure all external
doors are closed and any internal doors and any
*Proof of performance: internal doors and small space closures are open.
• Australian TGA Approved for COVID-19 claim (ARTG No. 336972) Positioning of static fogging equipment or movement
• Conforms to Virucidal Effectiveness European Standard EN 14476 of portable fogging equipment must be carried out to
• AIRBUS CML-14-006C, CML 12-012A, achieve a minimum dosage rate of 8mL/m3.
• AMS 1526, AMS 1452, AMS 1453, Boeing D6-7127M
• CFM 56 – CP2712
• NATO Stock No: 6840-14-5994327
Page 3 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
WE'VE GOT YOU COVERED!
Surgical Masks In Stock Now!
THREE LAYER MASK Art. No. 0899 110 001
Light weight and low breathing strength, comfortable to wear.
Material:
EN14683 Type 1. BFE (Bacterical Filtration Efficiency) > 95%. • Polypropylene/ PP.
Size: 9.5 cm width and 17.5 cm length.
• Metal nose clip.
TGA Approved.
• Latex free ear loop.
BUY IN BULK AND SAVE!
Page 4 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
HSCO SPOT WELD DRILL BITS HSCO SPOT WELD DRILL BITS
Spot weld bits made from HSCO. Special HSCO drill for removing spot welds.
Suitable for use in Vario Drills. • Maximum speed: for Ø = 8: up to 850 rpm.
• The use of cutting oil is recommended.
• No need for centre-punching.
• The use of cutting oil is recommended. Ø mm Total Length Groove
• Recommend speed of use under 800 rpm. mm Length mm
8 78 38
Ø mm A mm B mm C mm
8 44 16 7.5
Art. No 0710 008
Art. No 0710 80 Cat Page:02 0622
Cat Page:02 0641
SHEET METAL CONICAL DRILL BIT SET - HHS
Stepless drilling and widening of holes within a diameter
range of 3 - 30.5mm Speed table for Sheet Metal Drills
Material Non-ferrous Stainless Steel Sheets, Plastic Duroplasts, Steel Sheets, Soft,
Metals Nirosta A2 Thermoplasts i.e. St 14 - St. 37
Sheet Thickness 0.1 - 6.0 mm 0.1 - 2.0 mm up to 10.0 mm 0.1 - 4.0 mm
Size Diameter mm n = r.p.m. n = r.p.m. n = r.p.m. n = r.p.m.
1 3 - 14.0 2000 -1500 600 - 400 3000 - 2000 800 - 500
2 5 - 20.0 1500 - 800 400 - 200 2000 - 500 600 - 300
3 16 - 30.5 1000 - 500 200 - 100 1500 - 1000 400 - 200
Art. No 0694 024 01
Cat Page:02 0661
COUNTERSINK BIT 90° ASSORTMENT
Blue Ring HSS.
Contents Art. No.
1 countersink bit each of diameters:
0694 017 01
6.3 - 8.3 - 10.4 - 12.4 - 16.5 - 20.5mm.
Cat Page:02 1001
Page 5 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
BODY SAW BLADES
Body saw blades with flat mounting. 1
• Special quality for higher-strength vehicle
body sheet metal.
• Designed for high cutting speed and long 2
service life.
Item Material For wall Tooth Art. No.
Teeth Suitable for
thickness in spacing in
per inch
mm mm
For double and triple
1 Up to 4 24 1 0696 924 1
sheeting Würth
For thin sheet metal DST Mini/
2 and higher-strength Up to 1 32 DST 380 0.8 0696 932 1
steels
Cat Page: 03 0502
SPEED CUT-OFF DISCS
Green cut-off discs for Stainless Steel
Dia x Thickness: 125 x 1.0 mm
Bore Dia: 22.2 mm
Design:
Max. RPM: 12,200
Premium
GREEN CUT-OFF DISCS
High performance cut-off
discs. Blue for Steel. Green
for Stainless Steel.
Art. No. 0664 131 250
Cat Page: 03 1022
GRINDING DISCS
The robust grinding wheel
with high performance
values. Reinforced with
high-grade fabric.
Dimensions mm Bore Max. Min Order
Dia. x Thickness mm rpm Qty.
125 x 1.0 22.1 12,250 10 Dia x Thickness: 125 x 6.0 mm
Bore Dia: 22.2 mm
Art. No. 0669 230 121 Design:
Cat Page: 03 1028 Max. RPM: 12,250
Buy In Bulk Check out the
product Demo!
@WurthAustralia
Art. No. 0669 260 126
Cat Page: 03 1502
Page 6 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
HEAVY-DUTY LAMELLA GRINDING DISCS “EDGE PRO”
Segmented grinding disc with patented segment shape and
arrangement. Extremely long service life coupled with very high Check out the
product Demo!
degree of material removal. Specially suitable for grinding edges. @WurthAustralia
Dia. Bore max. Grit Art. No.
mm Dia. r.p.m.
mm
40 0578 480 514
115 13,300 60 0578 480 516
80 0578 480 518
22.23
40 0578 480 524
125 12,200 60 0578 480 526
80 0578 480 528
Complies with the OSA
(Organisation for Safety of Abrasives).
Cat Page: 03 1572
SEGMENTED GRINDING DISC FOR STAINLESS STEEL LONG-LIFE
Segmented grinding disc with specially encased, grinding- Check out the
product Demo!
active ceramic grain specifically designed for stainless steel @WurthAustralia
and high-alloy steels
• For freehand grinding with electric or pneumatic angle grinders.
• Circumferential speed max. 80 m/s
• Free of iron, chlorine and sulphur (≤ 0.1%)
• High-performance abrasive cloth (robust polyester fabric) with
additional active grinding coating layer (Top Size coating)
• Specially coated active grinding ceramic abrasive grain
• Robust backing disc made from glass fabric
Dia. Bore max. Grit Curved
mm Dia, r.p.m.
mm Art. No.
40 0578 430 314
60 0578 430 316
115 13,300
80 0578 430 318
120 0578 430 311
22.2
40 0578 430 324
60 0578 430 326
125 12,200
80 0578 430 328
120 0578 430 321
Complies with the OSA
Cat Page: 03 1571 (Organisation for Safety of Abrasives).
Page 7 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
SEGMENTED GRINDING DISC Check out the
product Demo!
Check out the
product Demo!
CERALINE LONGLIFE & SPEED POWERLOCS FIBRE
@WurthAustralia @WurthAustralia
Segmented grinding disc Twist lock backing compatible
for extremely high and with all backing pads.
fast material removal at
low contact pressure for Material - Alumina Zirconia
steel, stainless steel and • Ideal in confined spaces.
aluminium. • Laminated, tough backing.
• High speed.
Complies with the OSA
(Organisation for Safety of Abrasives).
Diam. Max. Grain Art. No.
mm speed
GREAT FOR STAINLESS STEEL 36 0580 005 036
60 0580 005 060
50 30,000
Grit Size Art. No. 80 0580 005 080
120 0580 005 012
40 0578 510 524 36 0580 007 536
60 0578 510 526 60 0580 007 560
75 20,000
80 0578 510 528 80 0580 007 580
120 0578 510 521 120 0580 007 512
Cat Page: 03 1573 Cat Page: 03 1598 Min order Qty. 10
Lamella Fan Grinding Disc - Zirconium
Lamella grinding disc with Zirconium Corundum grain.
Suitable for stainless steel.
• Very long service life due to hard zirconium corundum.
• Excellent grinding properties until the end of the service life.
• Discs can be used up to 100%.
• Self sharpening of the lamella, therefore no clogging. Dia. Bore max. Grit Curved 12o
• No scores or scratches in finish. mm Dia, r.p.m. Art. No.
mm
40 0579 430 304
100 16 15,300 60 0579 430 306
80 0579 430 308
40 0579 430 314
60 0579 430 316
115 13,300
80 0579 430 318
120 0579 430 311
40 0579 430 324
22.2 60 0579 430 326
125 12,200
80 0579 430 328
120 0579 430 321
40 0579 430 374
178 8,600 60 0579 430 376
80 0579 430 378
Cat Page: 03 1591
Page 8 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
POWERLOCS FLEECE NYLON ABRASIVE FLEECE DISC
Twist lock
WITH CLOTH PLATE
backing
Efficient cleaning of welding
compatible
seams, metal surfaces,
with all
wood and plastic.
backing pads.
For direct use
Diam. Max. Colour Grain Art. No. on angle grinders.
mm speed No additional
support plate required.
Grey Ultra fine 0673 205 040
Blue Fine 0673 205 028
50 23,000
Maroon Medium 0673 205 018
Brown Coarse 0673 205 010
Grey Ultra fine 0673 207 540
Blue Fine 0673 207 528 Colour Guide Steel Stainless Steel Aluminium
75 18,000 Diameter 125 mm
Maroon Medium 0673 207 518
Brown Coarse 0673 207 510 Bore Hole 22.23 mm
Grid Size Very Course
Cat Page: 03 1598 Min Order Qty. 10 Max. Rotation Speed 10,000 U/min (rpm)
Material of Abrasive Medium Silicon Carbide
ADD A DIE GRINDER FOR ONLY
$150.00 EXCL. GST
$165.00 Inc. GST
$22.48
each excl. GST
Art. No. 0585 312 5
Art. No. 0703 231 014 $24.73 each incl. GST
Cat Page: 03 1633
MINI VULCANISED FIBRE DISC CERALINE
Small abrasive with quick change holder for use on offset compressed
air angle grinders and flexible shafts in hard-to-reach places.
Extremely high and very fast material removal rate with cool grinding.
High-performance sanding grain and active grinding top layer.
Ø mm Grid Max. Rotation Recommended Art. No.
Size Speed Rotation Speed
36 0580 005 236
60 30,000 U/min 20,000 U/min 0580 005 260
50 mm
80 (rpm) (rpm) 0580 005 280
120 0580 005 212
36 0580 007 236
60 20,000 U/min 12,000 U/min 0580 007 260
76 mm
80 (rpm) (rpm) 0580 007 280
Check out the
120 0580 007 212 product Demo!
@WurthAustralia
Cat Page: 03 1659
Page 9 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
HHS 2000 - 500ml HHS GREASE
High quality, white long-term
Partly synthetic oil that
maintenance grease containing PTFE.
is extremely resistant to
high pressures.
Versatile white long-term grease with outstanding
• High-pressure resistant material compatibility properties.
• High creep capacity
• Active adhesive effective • Long life.
• Good material compatibility • Outstanding material compatibility.
• Splash and saltwater-resistant, • With PTFE solid lubricant share.
withstands • With special white pigmentation.
• weak acids and alkaline solutions. • Splash and saltwater-resistant, withstands
• Contains no silicone, resin or acid weak acids and alkaline solutions.
• Operating temperature range:
• –35°C to +180°C Contains no silicone, resin or acid.
• Temporarily: +200°C
• Colour: Yellowish. Operating temperature range:
–15°C to 130°C, temporarily 200°C.
Colour
Bright white
Art. No. 0893 106 Art. No. 0893 106 7
Cat Page: 04 1014 Cat Page: 04 1031
HHS DRYLUBE ROST OFF ICE
Dry synthetic wax highly High-grade rust loosener with cracking
resistant to centrifugal force effect created by extreme cooling, and
containing PTFE. excellent creeping properties.
• Shear-proof dry synthetic wax with
Cracking effect.
PTFE
When the surface of the material, e.g.
• Dry synthetic wax
that of a threaded bolt, is cooled down to
• Lubricant does not shear on fast-
-40°C, microscopic cracks appear in the
rotating and rotating parts
layer of corrosion of the joints, and these
• Outstanding creep and gap
cracks break up the rust and therefore
penetration characteristics
ensure better penetration.
• Contains PTFE solid lubricant
• Good emergency running property
Phenomenal capillary action.
and temperature resistance.
Superior creeping properties combined
• Excellent material compatibility
with the cracking effect ensure excellent
penetration of rust.
Clearance
Art. No. 0893 106 6 Art. No. 0893 240
Cat Page: 04 1026 Cat Page: 04 1069
Page 10 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.ELECTRICAL SILICONE GREASE DIELECTRIC GREASE - 85G
White, extremely lubricant, water High temperature grease for
displacing and insulating silicone lubricating rubber and plastic parts.
lubricant.
• High thermal conductivity.
• O utstanding gliding capability on almost all • High heat transfer.
surfaces. • Contains no petroleum distillates.
• Extremely high water displacing • For use on rubber 0-rings, seals, spark
effectiveness. plug boots, plastic gears, etc.
• Very high electrical resistance, thus very • Low toxicity.
good insulating properties (= 14.7 kV/mm). • Protects electrical components.
• Temperature resistance range: • Withstands temperatures up to 200oC.
–40°C to 300°C.
• Colour: Transparent when sprayed, after
application a white film of lubricant remains
on the treated surface.
Art. No. 0893 223 Art. No. 0893 844 100
Cat Page: 04 1032 Cat Page: 04 1032
SILICONE SPRAY CURTAIN TRACK LUBE
Protects, maintains, lubricates and For smooth and reliable operation of
insulates plastic and rubber surfaces. curtain rollers on trucks and trailers.
Suitable for bumpers, radiator grills, Suitable for curtain-side track rollers
protective strips, plastic rails and guides, and channel lubrication.
sealing rubbers (e.g. doors), rubber • Ensures smooth curtain operation without
covers and rubber hoses. excessive drag.
Prevents brittleness and removes creaking/ • Helps to reduce roller wear for longer life.
squeaking sounds, particularly where different
materials rub, e.g. metal/plastic. Improves Anti-static silicone formulation.
appearance by providing a high gloss finish, Minimal dust accumulation for long lasting
particularly to plastic components. effectiveness.
Protects electrical contacts against Pleasant fragrance.
dampness and corrosion.
May be used on trailer plugs etc. Suitable for use on other sliding
fixtures like:
• Sliding doors;
Check out the
product Demo!
• Drawer runners;
@WurthAustralia • Fire Doors;
• Bi-fold doors.
Art. No. 0893 221 Art. No. 0893 125 080
Cat Page: 04 1061 Cat Page: 04 1062
Page 11 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.BOLTEX RUST RUST REMOVER ROST Injector Solvent
DISSOLVER OFF BLACK Injector-EX Check out the
product Demo!
@WurthAustralia
Mineral oil-free, high- Highly effective Mineral oil free
tech rust dissolver with graphite-based rust injector and spark plug
KENA® micro-fluid. remover, lubricant, solvent with KENA®
corrosion protection microfluid formula.
and cleaner.
• Special product for
loosening injectors and
spark plugs in assemblies
Check out the
product Demo!
and engines.
@WurthAustralia • KENA® microfluid
technology.
• Safe for people and the
environment.
Art. No. 0893 300 250
Art. No. 0893 250 250 Art. No. 0890 200 500
Cat Page: 04 1070
Cat Page: 04 1070 Cat Page: 04 1069
Ultra 2040
Multi-purpose penetrant, lubricant
and water displacer containing
PTFE for long-term lubrication.
• Lubricant containing PTFE. Check out the
product Demo!
• Rust penetrating agent with superb
@WurthAustralia
capillary action.
• Displaces moisture.
• Corrosion protection.
• Silicone free.
• Gives a shine to surfaces
Description Art. No.
500 ml Aerosol 0890 085 500
20 L Container 0890 085 021
Tap for 20L Container 0891 302 03
Cat Page: 04 1067
Page 12 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.ROST OFF PLUS
High-performance rust dissolving agent
with additional lubricating properties
through new additive technology (OMC2).
Strong capillary activity.
Optimal creep properties guarantee
outstanding penetration and removal of rust.
Contains the highly effective liquid
molybdenum compound OMC2.
• In contrast to products containing solid
lubricants, e.g. MOS2, OMC2 does not
separate in larger containers.
• Friction is reduced.
Description Art. No.
Rost Off Plus Can 300ml 0890 200
Rost Off Plus Container 5l 0890 300
Rost Off Plus Container 20l 0890 300 1
Cat Page: 04 1068
CU 800
Resistant to high temperatures and pressures, highly
adhesive copper lubricating, release and corrosion
protection paste.
• Very high resistance.
• Temperature range from –40°C to +1200°C.
• Resistant to water, alkaline solutions and acids.
• Great, long-lasting lubricating effect.
• Provides long-term protection against burning-on and seizing,
cold welding, wear, corrosion and frictional corrosion.
• Silicone free.
Use:
Brakes: Back sides of disc-brake pad (prevents
squeaking), fastening and individual parts.
Nozzles of arc welding torches (prevents 300 ml
formation of welding beads). Art. No. 0893 800 1 kg
Seals: Prevents baking on of solid seals. Cat Page: 04 1501 Art. No. 0893 800 2
Miscellaneous: Screw connections (exhaust
manifold screws, spark plug threads etc.),
bearings, pivot points, joints, sliding surfaces
Page 13 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.BRAKE PROTECTION HT Extreme high temperature and high-pressure resistant lubricating, anti-seize and anti-corrosion paste. Ceramic based compound. • Does not harm sensors on brake systems. • Suitable for use on vehicles fitted with ABS brake systems, Automatic Stability Control and Traction Control systems. • High material compatability makes this suitable for use on all types of metals. Heat-resistant up to 1,400°C. Remains effective even under extreme driving conditions where brakes are operating at higher temperatures. Great, long-lasting lubrication a nd insulating effect. Helps to lubricate brake slides and prevent squeaking noises from brake pads for extended periods. Resistant to sprayed and salt water. Resistant to diluted acids. Silicone and AOX free. High-pressure resistance. Highly anti-corrosive - 240 hours salt spray testing. Description Contents Art. No. Aerosol 300ml 0893 816 Brush Application inc.Brush 200ml 0893 816 001 Cat Page: 04 1508 Page 14 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.
CUT + COOL CUTTING
& DRILLING OIL CUT + COOL CUTTING &
CARBURETTOR CLEANER PERFECT - 400ML DRILLING OIL - 400ML
Throttle body safe High performance Multi-cutting Oil for
fuel residue cleaner. cutting oil for light to medium heavy
Improves air fuel flow. heavy duty machining machining work.
and high cutting speeds.
• For universal use.
• Provides instant cooling
on application.
• Good creeping qualities..
• Excellent corrosion
protection.
Art. No. 0893 050 008 Art. No. 0893 050 004
Art. No. 1893 100
Cat Page: 04 2001 Cat Page: 04 2007
Cat Page: 04 4031
INDUSTRIAL CLEANING WIPES ANTI-SQUEAL SPRAY
For thorough and quick cleaning of most surfaces Eliminates disc brake pad squeal. Helps to
without water, soap or a brush. prevent brake pad knocking and vibration
within the caliper frame.
Application:
After removal and cleaning of disc brake pads, place
them on a clean surface and apply the Anti-Squeal to
the metal backing of the pads. Spray Anti-Squeak
from a distance of 20cm to 30cm onto the backing of
the pads in a sweeping motion, allowing a thin film to
develop. Allow to dry then refit.
Also can be applied to the back of new brake pads.
Art. No. 0890 900 90 Art. No. 0890 106
Cat Page: 04 3501 Cat Page: 04 1513
Page 15 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.HAND CLEANER
Wurth Hand Cleaner Fine and Course - Water-based handcleaner for
industrial use, on a daily basis. ASK ME ABOUT
A SYSTEM!
Description Contents Art. No.
Hand Cleaner Coarse 4000 ml 0893 900 099
Hand Cleaner Fine 4000 ml 0893 900 0
Hand Cleaner Tube (Fine) 350 ml 0893 900 01
Cat Page: 04 3531
Toilet paper - 2Ply SCREEN CLEANING CLOTHS
Soft and gentle despite Impregnated disposable
good tear resistance. cloths for streak-free
• Soft and gentle. and gentle cleaning of
• Highly absorbent. laptop and flat screens
• Tear-proof. of all kinds. 100 pcs.
• Economical.
• Workshop Grade. • Non-alcoholic formula.
• Has an anti-static effect.
• Effortlessly removes dust,
dirt and fingerprints.
• In a practical dispenser
box.
Art. No. 0890 150 000
Cat Page: 04 4032
Number of
Width LengthBox Contents
sheets
95 mm 95 mm 400 pcs 48 rolls
Art. No. 0899 900 222 Min Order Qty. 48
Cat Pg. 04 3541
Page 16 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.LIQUID GREEN - 5L
Powerful all-purpose cleaner with
high grease solvency.
Extraordinary cleaning
performance thanks to a new
combination of active substances.
• Grease, resin, and other soiling is
thoroughly and reliably removed.
• Economical.
• Saves time.
ALSO AVAILABLE
IN 500 ML
Art. No. 0893 474 5
Cat Page: 05 0531
NON-FLAMMABLE BRAKE
Unfilled 1L Pump Spray Bottle CLEANER - 5L
Non-flammable, multi-
purpose brake cleaner
with special safety
formulation.
Check out the
product Demo!
@WurthAustralia
Art. No. 0891 503 002 Art. No. 0890 108 723
Cat Page: 04 4061 Cat Page: 04 4052
Page 17 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.Brake Cleaner
For cleaning and degreasing during
maintenance and repair work.
Fast flash-off behaviour and excellent
cleaning performance.
• Fast and effective removal of soot, grease,
brake dust and oily residues.
• Residue-free cleaning.
• Perfect for oil leak diagnosis.
Acetone-free.
High material compatibility with paints,
plastics, seals and rubber.
AOX-free and silicone-free.
Description Contents Container Chemical Basis Article No.
Aliphatic
Uni Rapid 500 ml 0890 117
Aerosol Can Hydrocarbon
Plus 500 ml 0890 108 10
Naphtha
Bulk 20L Plastic Barrel 0890 108 719
Cat Page: 04 4061
Check out the
product Demo!
@WurthAustralia
Competitor
Safe on Plastic
Wurth Brake Cleaner
Page 18 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.COCKPIT CARE - 500ML ULTRA FOAM WASH
Fruit scented interior care Environmentally Check out the
product Demo!
for synthetic surfaces. friendly vehicle cleaning @WurthAustralia
concentrate.
• High-quality Carnauba
waxes, in combination Powerful cleaning
with Jojoba oil, provide performance.
optimum care. • Road dirt, oil, grease and
• Gentle formulation. other accumulated grime
• Lasting protection is removed quickly and
against the effects of thoroughly.
pollution. • Can be used manually or with
• Anti-static. high pressure cleaner.
• Provides ideal conditions for
further vehicle treatment or
restoration.
Concentrate.
• Can be adjusted to the degree
of dirt accumulation.
• Economical to use.
• Highly efficient.
• Saves money.
Art. No. 0893 473 1
Cat Page: 04 4242 Art. No. 0893 039 020
Cat Page: 04 4452
RAPID WINDSCREEN CLEANER
Highly concentrated windshield washer fluid. 1:100
Contains special cleaning agents.
• Prevents streaking.
• Eliminates glare and oily films.
• Provides crystal clear vision.
• Removes stubborn insects and other contaminations.
Very good material compatibility.
• Does not attack polycarbonate or glass.
• Gentle on paintwork and rubber.
User-friendly 1:100 concentrate.
• 32 ml sufficient for 2.5 – 3 litres of washer fluid
Pleasant peach fragrance.
Colour: Orange.
32ml Bottle 5 L Container
Art. No. 0892 333 Art. No. 0892 333 5
PUMP ALSO
AVAILABLE
Min. Qty: 25
Cat Page: 04 4331
Page 19 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.PLASTIC DYE - BLACK RUBBER CARE - 300ML
75ML Prevents door,
bonnet and luggage
For visual care of all
compartment rubber
plastic parts on a car
seals from freezing in
• Restores faded plastic to winter or becoming
original condition. stuck due to ageing
• Easy application. and heat
Art. No. 0893 280 1 Art. No.0890 110
Cat Page: 04 4661 Cat Page: 04 4662
NANO PAINT AND WHEEL SEALANT - 400ML
Long-lasting protection of paint and wheel rims
from the effects of weather due to innovative
nano-technology formulation.
• Special nano-technology provides hydrophobic sealant
layer on surfaces.
• Extremely long-lasting and car wash-proof.
• Quick-acting.
• Protects paint and wheel rims from the effects of weather.
• Increases colour brilliance.
• Insects and other dirt is noticeably easier to remove.
Art. No.0893 012 301
Cat Page: 04 4529
Check out the
product Demo!
@WurthAustralia
Page 20 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.HEADLIGHT REFURBISHMENT SET
Professional 2-stage system for refurbishment of
heavily weathered vehicle headlights.
Stone chipping, UV rays and other mechanical
influences cloud the surfaces of polycarbonate lenses
over the years or leave behind scratches and traces.
Enables refurbishment of virtually all vehicle headlights.
• Gives new brilliancy.
• Minimises the risk of accidents. Check out the
product Demo!
@WurthAustralia
25 Piece Assortment
Art. No. 5964 089 316
Cat Page: 04 4514
Page 21 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.RUST CONVERTER RUST CONVERTER PUMP BOTTLE SPARE
LIQUID SPRAY - 400ML PARTS
Dispersion-based, Easy to use
Do you own a Wurth Pump
environmentally corrosion
friendly rust protection Bottle that needs some love
converter paint with and attention?
and corrosion rust-conversion
protection.. properties.
Check out the
product Demo!
@WurthAustralia
Art. No. 0893 110 400 Art. No. 0891 599
Art. No. 0893 110
Cat Page: 04 5622 Cat Page: 04 6002
Cat Page: 04 5622
360° PUMP SPRAY BOTTLE 1 L PUMP BOTTLE - EMPTY
Special intake system allows For simple processing of solvent-
360° spraying and ensures containing products from
reliable working overhead, canisters and drums. Well-suited
at an angle or vertically. for media with a pH value of
5.0–9.0
• Ergonomic, robust pump
spray atomiser with long
Safe manual removal from
handle.
portable containers
• Fatigue-free working thanks
to low operating force.
Tactile elements for easy opening
• Individually markable label
with extra fields for safety
Ergonomic, sturdy spray
instructions.
atomiser with long handle
• Good stability thanks to
• Work made less tiring thanks to
conical shape.
low operating force
• Can also be attached to the
workshop trolley
Art. No. 0891 503 360 Art. No. 0891 503 001
Cat Page: 04 6002 Cat Pg. 04 6601
Page 22 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.PAPER TOWEL ROLLS GARBAGE BAGS
Highly absorbent blue paper towel for general workshop use. • 120 litres.
1000 sheets = 360m roll. • 700 x 1,100 mm.
• Material: Premium LDPE.
• Suitable for paper towel stands.
TURN TO PAGE 52
FOR PAPER TOWEL
SYSTEM PACKS!
Art. No. 0899 800 823 Min. Qty: 2 Art. No. 0899 800 550 Min. Qty: 25
Cat Page: 04 6021 Cat Page: 04 6021
TOP GUN CLEANING GUN
Cleaning atomiser pneumatic gun for vehicle
care.
Improved technology for better performance.
• Ball-bearing drive creates a vortex effect.
• Air and cleaning agent supply can be manually
adjusted.
• Dirt is lifted by the resulting suction.
• Articulated connection for more flexible handling
(optimum for places that are difficult to reach).
Cleans more thoroughly and effectively.
• Micro-atomization results in effective use of cleaning Innovative technology for less
agent. wear, economical consumption
of cleaning agents and
• Dirt is removed extremely quickly. improved performance.
• For use with many Würth cleaning agents.
PARTNER PRODUCT Check out the
product Demo!
BMF CLEANER @WurthAustralia
Art. No. 0891 703 140
Cat Page: 04 6062
Page 23 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.TEX REIN CLOTH SUPER RTV-SILICONE - 200ML
Tex-Rein cleaning and polishing High grade adhesive and
cloths are robust, strong and sealing
versatile, even when wet. compound.
• Special fold allows individual cloths Very good resistance to
to be removed easily. chemicals.
• Extremely resistant to tearing and wear. Suitable for use in critical areas, in
• Solvent-resistant and silicone-free. which the seal may temporarily be
• Very absorbent and durable. in contact with automotive fluids
• Washable, wringable and reusable. (e. g. motor or gear oil, coolants
• Colour-fast, so no bleeding. of glycol mixtures).
Colour Temperature Range Art. No.
ADD A
WALL Black - 60°C to 260°C 0893 331 1
BRACKET! Red - 60°C to 315°C 0893 331 2
Grey - 60°C to 260°C 0893 331 6
Art. No. 0899 810
Cat Page: 04 6064
Cat Page: 05 0501
Check out the
product Demo!
@WurthAustralia SILICONE SPECIAL 250 - OXYGEN
SENSOR SAFE
TACK CLOTH Special silicone sealing compound with
Medium tack cloth for the removal of very fine dust temperature resistance from -50°C to
before the application of paint. 250°C, short term up to 300°C.
• Oxygen sensor safe.
• Silicone free. • Cold vulcanising silicone rubber.
• Does not dry out. • Permanently elastic silicone sealing compound for
• Suitable for all wood, engine and body.
metal and plastic
surfaces.
Colour Contents Art. No.
Red 0890 321 10
310ml
Grey 0890 323 10
Art. No. 0899 700 001 Cat Page: 05 0531
Cat Page: 04 6064
Page 24 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.DOS SYSTEM
The benefits of the DOS System. Patented dosage cap - with 3 different dose settings. DOS System Poster.
Won't dry out and no need to cut.
Accessibility: DOS SYSTEM APPLICATION GUIDE
Motor
Sealant
Thread
Locker
Thread
Locker
Bearing
Retainer
Flange
Sealant
Flange
Sealant
Pipe
Sealant
Hydraulic
Sealant
• Bottles stored in the practical storage Closed position,
totally airtight Product Motor Thread Locker Thread Locker Bearing Flange Flange Pipe Hydraulic
holder means the right product is
Sealant High Strength Medium Retainer Sealant Sealant Sealant Sealant
Strength High Strength Green Orange
Art. No. Art. No. Art. No. Art. No. Art. No. Art. No. Art. No. Art. No.
0893 260 100 0893 270 050 0893 243 050 0893 603 050 0893 573 050 0893 574 050 0893 577 050 0893 545 050
easy to find and always within reach.
Application: Motor Sealant is a For securing and For securing and For securing bearings, For sealing precision For sealing precision Gas & fluid proof For sealing pneumatic
• The storage holder may be set up
transparent, red, viscous sealing of screws, sealing of screws, gear wheels, bolts, machined flanges machined flanges sealant for all pipe and hydraulic
fluid sealant which bonds bolts, nuts, threaded bolts, nuts, threaded screws, shafts and and surfaces with and surfaces with threads and fittings up connections under
to all metals. Suitable for inserts and threaded inserts and threaded auxiliary joints. gaps to max. 0.3mm. gaps to max. 0.5mm. to R3”. high loads up to the
Replacement for solid Replacement for solid
all engine gasket surfaces plugs. Restricts plugs. Restricts Prevents rattles due to gaskets. gaskets. bursting pressure of
since no residue remains. loosening by impact loosening by impact load change. the hose.
All sealed surfaces are or vibration. or vibration.
sealed against thermal,
chemical and mechanical
anywhere, such as a work bench, on
stress. Sealed surfaces
can be easily separated.
Resistant to petrol, diesel,
oil, grease, water, steam,
frost and all normal
chemicals.
*Only suitable for use on
the wall or a tool trolley.
engine components.
Properties: A product that adheres Universal product A commonly used Universal product for Particularly suitable Particularly suitable Excellent resistance Excellent resistance
to most surfaces. It is for all threads and product, providing heavily stressed joints. where a good where a good to chemicals, gas, to chemicals, gas,
permanently pliable and cylindrical parts which excellent protection High tear-resistance. coverage is essential coverage is essential liquids, fuels and liquids, fuels and
resistant to vibration. As would not normally be against oil, water and e.g. with complicated e.g. with complicated hydraulic fluids. hydraulic fluids.
Can be used in small
the product only has to released again. heat. castings, narrow links castings, narrow links
spaces between Fast curing even at
applied thinly to one side and smooth surfaces. and smooth surfaces.
Can be released with Will harden even at joined surfaces. low temperatures.
it is very economical. It
special tools and/or very low temperature. Excellent resistance to An easily detached An easily detached
can also be used as a Can be applied on
heat. Can be released with media. low adhesion joint, low adhesion joint,
replacement for solid slightly oily surfaces,
normal tools. which is particularly which is particularly
gaskets. no need for time
flexible. flexible.
consuming degreasing
Highly suitable for
Practicality:
of threads.
larger and rougher
machined surfaces.
The seven most important sealants for
Chemical Basis: Epoxy resin Dimethylacrylate Dimethylacrylate Dimethylacrylate Dimethylacrylate Dimethylacrylate Dimethylacrylate Dimethylacrylate
Colour: Transparent Red Green Fluorescent Blue Green Fluorescent Green Fluorescent Orange Fluorescent Yellow Violet
Viscosity in mPas: 5,000 – 13,200 400 - 600 5,000 - 7,000 100 - 150 40,000 - 60,000 35,000 - 100,000 20,000 - 80,000 1,500 - 2,000
Open position,
Stability in storage: 1 year 1 year 1 year 1 year 1 year 1 year 1 year 1 year
Full strength at 25ºC: +80oC=6hrs, +180oC=5hrs 6 hours 3 hours 6 - 24 hours 6 - 24 hours 6 - 24 hours 3 hours 12 - 24 hours
Break loose resistance: – >30Nm 21Nm – 8 - 12Nm 17 - 22Nm 15 - 20Nm 2-3Nm
every work shop are included in the set.
Operating pressure: 700 bar (10,290psi) – – – – – 300 bar (4410psi) 200 bar (2940psi)
three settings
Tensile strength: – – – – 2 - 4 N/mm2 8 - 10 N/mm2 – –
Temp. resistance: -50oC to +280oC -55oC to +150oC -55oC to +150oC -55oC to +150oC -55oC to +150oC -55oC to +150oC -55oC to +150oC -55oC to +150oC
Max. gap bridging: approx 2mm up to 0.15mm up to 0.25mm up to 0.15mm up to 0.3mm up to 0.5mm 0.5mm 0.15mm
Max. thread joint: – M20 M36 M12 – – R3” (M80) R3/4”
Max. glue gap: approx 2mm – – – 0.3mm 0.5mm – –
Ease of Use:
Instructions for use: Clean and dry the surfaces Clean add dry threads, applying a small amount Clean and dry all surfaces to be sealed with a suitable solvent (ie. Brake Cleaner - 0890 108 7). Apply a small amount
to be sealed. of Thread Lock. Tighten to specifications. Apply a thin layer of Sealant to one side only and assemble parts immediately. of Hydraulic Sealant to
Apply a thin layer of the threads and tighten to
material on one side and specifications.
leave for 5-20min to air, then
join two surfaces. Thermal
hardening possible
from +60oC. It is relatively
• The revolutionary "dosage cap"
easy to separate the joined
parts if necessary.
RESISTANCE TABLE FOR DOS-SYSTEM
• Kerosene • Alcohols • Formic Acids • Ethelacetate • Acetone • Petrol • Alkaline Solutions • Phosphoric acid (10%)
• Diesel • Jet Fuel • Aviation Spirit • Frost protection • Gear oil • Heating oil • Hydraulic oil • Solvents (chlorinated)
• Engine oil • Oils • Xilene • Steam • Coolants • Brake Fluid
allows accurate application of the Article No. 0893 964 001/ Job No. 391110 - AUS/Revised/Reprint: 2/11 Wurth Australia Pty. Ltd. - T: 1300 65 77 65 - Contact us today
product with no overflow. Art. No. 0893 964 001
• Each bottle can be operated easily
with one hand.
• Because the bottles are stored lid-
down in the holder, the product is
always ready to use. What is the DOS System? Patented dosage cap - with 3
• Ensures that each bottle is A revolutionary system for one different dose settings.
completely used up. handedapplication of sealants. Won't dry out and no need to cut.
Art. No. 0893 964
Cat Page: 04 6045
Page 25 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.DOS BEARING RETAINER DOS THREAD LOCK - DOS FLANGE SEALANT -
- HIGH STRENGTH MEDIUM STRENGTH GREEN
For high strength Screw retaining and For sealing of flanges
assembly of bushes, sealing compound and surfaces with a
sleeves, geared wheels, for the securing and small gap of 0.3mm
bolts, shaft and hub sealing of screws, maximum replacement
connections and bearings bolts, nuts, threaded for solid seals.
exposed to high loads. inserts and threaded
plugs. Restricts
loosening by impact or
vibration.
NSF P1 registered. (No:
NSF P1 registered. (No:
151966) corresponds to the
151966) corresponds to the
requirements of P1.
requirements of P1.
Art. No. 0893 603 050 Art. No. 0893 243 050 Art. No. 0893 573 050
Cat Page: 05 1519 Cat Page: 05 1502 Cat Page: 05 1508
DOS FLANGE SEALANT - DOS PIPE SEALANT DOS HYDRAULIC
ORANGE Gas and fluid proof
SEALANT
For sealing of flanges sealing of all pipe For sealing screw
and surfaces with threads and fittings connections in
a gap of 0.5mm up to M 80 R3”. pneumatic and
maximum replacement hydraulic systems
for solid seals. under high loads up to
the bursting pressure
of the pipe or hose.
NSF P1 registered. (No:
151966) corresponds to the
requirements of P1.
Art. No. 0893 574 050 Art. No. 0893 577 050 Art. No. 0893 545 050
Cat Page: 05 1513 Cat Page: 05 1520 Cat Page: 05 1525
Page 26 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.DOS MOTOR SEALANT - DOS BEARING RETAINER DOS PIPE SEALANT
100G - HEAT RESISTANT - 50G Gas and fluid proof sealing
of all pipe threads and
Replacement for For fastening bushings fittings up to M 80 R3”.
solid engine seals on and bearings exposed to
pressure chambers high temperatures.
as well as screw
connections.
Art. No. 0893 260 100 Art. No. 0893 620 050 Art. No. 0893 511 250
Cat Page: 05 1514 Cat Page: 05 1519 Cat Page: 05 1520
NON-RUNNING DOS THREAD LOCK - MOVEMENT DETECTION
SURFACE SEALANT - HIGH STRENGTH PAINT - 50G
50G Solvent-free
Screw retaining and
locking, marking
For sealing sealing compound.
and sealing lacquer
flanges and For securing and
with good adhesion
surfaces sealing of screws,
to virtually all
with a large studs, bolts, nuts,
materials.
gap. Viscous threaded inserts
product. and plugs, which
are not required
to be removed Check out the
product Demo!
under normal @WurthAustralia
circumstances.
Art. No. 0893 518 050 Art. No. 0893 741 451 0893 741 452
Art. No. 0893 270 050
Cat Page: 05 1526 Cat Page: 05 1507 Colour Flame Red RAL 3000 Yellow RAL 1021
Cat Page: 05 1601
Page 27 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.PRIMER FOR POWER SPRAY GLUE
PLASTOBOND - 20G PLASTOBOND PLUS
For the adhesion of hard-to-glue Primer for Plastobond Contact adhesive with
plastics, filled elastomers and
high immediate adhe-
natural rubber. • A
dhesion agent for sive strength and high
pre-treating PE, PP and heat resistance.
Fast drying time. PTFE plastics and silicone
Stretch Capacity 3% rubber. Do not use primer
on other plastic types
Min/Max 5 to 40 oC • Fast-acting.
Process Temp.
Shelf Life 12 months
Colour Clear
Art. No.0893 091 Art. No. 0893 091 5 Art. No. 0890 100 064
Cat Page: 05 4008 Cat Page: 05 4008 Cat Page: 05 4122
SUPER FAST GLUE SKG- Super Fast Gel
FLEX - 20G ACTIVATOR - 150ML Adhesive - 20g
Tough and flexible For accelerating Run-proof superglue in
black cyanoacrylate the reaction gel form enables precise
with excellent thermal of Wurth application, even on
stability. cyanoacrylate overhead or vertical
adhesives. surfaces.
• High impact and peel
resistance. The activator can be
• Increased moisture used on all surfaces.
resistance.
• For the adhesion of metal,
plastic, and rubber parts
with and to each other.
Art. No.0893 092 Art. No. 0893 301 20 Art. No.0893 403 1
Cat Page: 05 4008 Cat Page: 05 4007 Cat Page: 05 4001
Page 28 Auto, Cargo, Mining Specials - Offers valid from September 1st to September 30th 2020 • Prices excluding GST
Promotional packs can only be credited in full - no partial credits - all items must be returned to warehouse, no exceptions. Prices within this promotion are recommended selling prices including GST and will be valid while stocks last. All items have been
included in good faith on the basis that they will be available at the time of sale. Photographs are for illustrative purposes only and may not represent actual products. We reserve the right to correct printing errors. Wurth is a registered trademark of Wurth
International AG. ABN 48 002 487 096. All information, images and content is copyright of Wurth Australia Pty. Ltd.You can also read
