BEILITE BLTB 85 - ACDE Europe BV
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
BEILITE BLTB 85 Ersatzteilliste - Spare Parts List
85
®
Seriennummer: bis
Serial number: up to
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-85-01
BEILITE BLTB 85 Ersatzteilliste - Spare Parts List
ORIGINAL BEILITE ERSATZTEILLE
Echte Beilite–Ersatzteile werden nach dem neuesten technologischen Erkenntnisstand und mit modernsten
ingenieurtechnnischen Mitteln konzipiert und gefertigt. Beilite-Erzatzteile werden aus den besten auf dem Markt
erhältlichen Materialien und mit Hilfe modernster Fertigungmethoden hergestellt.
Es ist von größter Wichtigkeit, dass Sie nur echte Beilite-Ersatzteile verwenden, um auf diese Weise einen
problemlosen Betrieb sowie eine leichte Wartung und Reparatur des Hammers sicherzustellen. Bitte beachten Sie,
dass eventuelle Garantieansprüche nur dann bearbeitet werden können. Wenn Sie echte Beilite-Ersatzteile fur Ihren
Hammer verwendet haben.
VERMERK DER SERIENNUMMER
Es ist wichtig, dass Sie bei der Bestellung von Ersatzteilen die korrekte Seriennummer des Hammers angeben kön-
nen. Die Seriennummer bietet die einzige Möglichkeit, die zu einem bestimmten Hammer gehörigen Teile zu
identifizieren. Die Serienummer des Hammers ist in den Ventilkörper eingeschlagen. Die Seriennumer ist ebenfalls auf
dem CE-Schild am Hammergeäuse vermerkt.
ERSATZTEILBESTELLUNG
Präzise Bestellungen bilden die Grundlage für schnelle Ersatzteillieferungen.
Erforderliche Angaben:
• Name des Kunden und der Kontaktperson
• Bestellnummer (falls vorhanden)
• Lieferanschrift
• Lieferart (Luftpost, ect.)
• Gewünschter Liefertermin
• Rechnungsanschrift
• Modell und Serienummer des Hammers
• Bezeichnung, Nummer und erforderliche Anzahl der Ersatzteile
GENUINE BEILITE SPARE PARTS
Beilite genuine spare parts are designed and manufactured by using the latest technological knowledge and
engineering skills. Beilite spare parts are made of the best availible materials with the most advanced manufactering
techniques.
It is important that you use only genuine Beilite spare parts, to ensure easy operation, maintenance and repair of the
product. Please note that eventual warranty claims will be handled only if you have used genuine Beilite parts in your
Beilite.
LOCATION OF THE SERIAL NUMBER
It’s important to make correct reference to the serial number of the product when ordering spare parts. Identification of
serial number is the only proper means of maintaining and identifying parts for a specific product. The location of
equipment serial number is pointed in “Operation and maintenance” manual.
SPARE PARTS ORDERS
Quick spare parts deliveries are secured by exact orders.
Requierd information:
• Name of customer and contact person
• Order number (when available)
• Delivery address
• Mode of delivery (air mail ect.)
• Required delivery date
• Invoicing address
• Model and serial number of the product
• Name, number and required amount of spare parts
© 2020 Taizhou Beilite Machinery Co. ltd. P-85-01
- No. 2020 P-40-01 2
BEILITE BLTB 85 Ersatzteilliste - Spare Parts List Inhalts verzeichnis - Abmessungen 8 - Anzugsmomenten 4 - Dichtsatz 10 - Ersatzteilliste 4 - Fettpresse 12 - Gehäuse 6 - Meissel 9 - N2 Füll Satz 11 - Optionen 12 - Werkzeugkiste 11 Contents - Dimensions 8 - Grease Gun 12 - Housing 6 - N2 Filling Gear 12 - Optional Equipment 11 - Seal Kit 10 - Spare Part List 4 - Toolkit 11 - Tools 9 - Torque Moments 4 © 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-85-01 3
BEILITE BLTB 85 Ersatzteilliste - Spare Parts List
33 34 31 32 29
53
58
51 14
50
52
59
40
45
57
30
49
55
24
36
54
25 39
27
26
48 45
27 47 46
3 37
22
21
18
38
19
7
20 14 8
7 13 12
8 11
10 9
49
2
16
15
4
5
-P -FX -E -CX
IV. Product identification and position
6
1. Beilite sign 5. Rear cylinder warning sign 7. Beilite sign
It includes the relevant parameters
41 42 43
Warning
41 42
of the product which must be
confirmed when you purchase the
43 4444
Version 2019 s/n BLTB85-
DISCHARGE
RIOR TO product.
DISASSEMBLY
Beilite Machinery Co., Ltd.
IV. Product identification and 2.
position USE ONLY NITROGEN Weight kg
Grease nipple
60 Length mm
No. Anzugsmoment1. Beilite sign Achtung!
5. Rear cylinder warning sign 7. Beilite sign Achtung!
6. Accumulator warning sign
Required oil Flow
Working pressure
L/min
kg/cm2
It includes the relevant parameters
Tightening torques DISCHARGE
DISCHARGE
Warning
Every 2 hours of the product whichWarning
must be
confirmed when you purchase the
DISCHARGE
Impact Rate
Hose Diameter
b.p.m
In
Chisel Diameter mm
7 130-140NM product.PRIOR
PRIOR TO TO
RIOR TO
DISASSEMBLY DISASSEMBLY
DISASSEMBLY Chisel Length mm
DISASSEMBLY
It refers to the oil injection port. It Beilite
is Machinery Co., Ltd. Applicable Excavator m2
9 200-210NM 2. Grease nipple
recommended to add grease every Weight
USE ONLY NITROGEN USE ONLY NITROGENkg Ton
two hours and grease can be added Length mm
12 130-140NM N2 ablassen
6.Nar
von when
at any time
N2 verwenden
Accumulator
chisel
demontage
is dry.warning sign
N2 ablassen
it is found that theRequired oil
Working pressure
von demontage
Flow
Nar N2 verwenden
L/min
kg/cm2
31 130-140NM Every 2 hours
Warning
3. Valve adjuster
Impact Rate
8. Operation
Hose Diameter
b.p.m
precautions
In
DISCHARGE
33 50NM PRIOR TO
DISASSEMBLY
Chisel Diameter
ChiselThe operator should
Length
mm
mmpay attention to the following items when using
It refers to the oil injection port. It is Valve Adjuster Applicable Excavator m2 the hydraulic breaker
49 60-70NM recommended to add grease every USE ONLY NITROGEN
Check before start up:
• Check whether the main
Ton • When disassembling the
hydraulic breaker, protect the
two hours and grease can be added engine is equipped with in/out adapter port and prevent
50 60-70NM at any time when it is found that the
chisel is dry. (Note: Be sure to adjust the pressure
sufficient hydraulic oil and external impurities from
whether the hydraulic oil is polluting hydraulic oil.
54 60-70NM 3. Valve adjuster
when the hydraulic breaker stops)
8. Operation precautions
To regulating the return pressure,
clean. Otherwise, please add or • Carry out maintenance and
replace hydraulic oil timely. replace the hydraulic oil and
57 1400NM you can adjust the hitting power and
Thefrequency.
operator If the adjustment
should
• Before starting work, please
is to the following
pay attention warm up items whenengine
the main using for Version 2019 s/n BLTB85-
filter element timely.
• When loading the hydraulic
improper, the hydraulic thebreaker willbreaker10 minutes to ensure that the
hydraulic breaker, please remove the
Valve Adjuster stop,before
so it is prohibited to make • When temperature
Check start up: disassembling of the
hydraulic oil is chisel.
• adjustment
Check whether randomly.
the main hydraulic breaker, protect the
suitable. • Main inspection points:
engine is equipped with in/out adapterwhether
• Check port andthere
prevent
is oil • Check whether the stop valve
4. Nitrogen
sufficient gas charging
hydraulic oil andpressure external impurities
leakage at thefrom
in/out adapters is fully open;
(Note: Be sure to adjust the pressure whether the hydraulic oil is polluting
andhydraulic oil.bolts are
whether the • Check whether the oil pipe
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-85-01
P-40-01 4
when the hydraulic breaker stops)
clean. Otherwise, please add or • Carry loose. out maintenance
Otherwise,and tighten the shakes abnormally;
To regulating the return pressure, N2 GAS CHARGE
replace hydraulic oil timely. replacejoints
the hydraulic
or bolts tooilthe
and
specified • Check whether the hydraulic
you can adjust the hitting power and • Before starting work, please filter element
frequency. If the adjustment is torque. timely. oil is sufficient and clean;
warm up the main engine for • When • Addloading the to
grease hydraulic
the hydraulic • Check whether the system
improper, the hydraulic breaker will 10 minutes to ensure that the breaker, pleasetimely.
remove the
stop, so it is prohibited to make breaker pressure is normal;
It indicates the
temperature of charging
hydraulicpressure
oil is of chisel.
BEILITE BLTB 85 Ersatzteilliste - Spare Parts List
No. ET No.-Part No. St-Qty Beschreibung - DE Description - GB Abmessungen-Dimension
1 BLTB-85-100 Zylinderaufbau Cylinder Assembly /
2 BLTB-85-101 1 Zylinder Cylinder /
3 BLTB-85-102 1 Kolben Piston /
4 BLTB-85-103 1 Puffering Buffer Ring HBY BLTB-85*100.5*6
5 BLTB-85-SKX-104 1 Dichtung U-Packing ISI BLTB-85*100*9
6 BLTB-85-SKX-105 1 Staubdichtung Dust Seal DSI BLTB-85*95*6*8
7 BLTB-85-106 4 Pfropfen Plug M20*1.5
8 BLTB-85-SKX-107 4 O-Ring O-Ring 1BP-18
9 BLTB-85-108 2 Ein/Aus Adapter In/Out Adapter G 3/4"
10 BLTB-85-109 2 Ein/Aus Adapter deck. In/Out Adapter Cover G 3/4"
11 BLTB-85-SKX-110 2 O-Ring O-Ring 1BP-24
12 BLTB-85-111 1 Entlüftungsventil Exhaust Valve G 1/2"
13 BLTB-85-SKX-112 1 O-Ring O-Ring 1BP-18
14 BLTB-85-113 2 Führungsstift Guide Pin Φ12.5*30
15 BLTB-85-SKX-120 1 Kreispropfen White Plug T/P Φ15*Φ11*14
16 BLTB-85-SKX-122 1 O-Ring O-Ring 1BP-11
17 BLTB-85-200 Ventilaufbau Valve Assembly /
18 BLTB-85-201 1 Ventilhülle Valve Cover /
19 BLTB-85-202 1 Ventil Valve /
20 BLTB-85-203 1 Ventilhülse Valve Sleeve /
21 BLTB-85-SKX-204 1 O-Ring O-Ring 1BG-45
22 BLTB-85-SKX-205 1 O-Ring O-Ring 1BG-30
23 BLTB-85-300 Kolbenbüchsenaufbau Piston Bush Assembly /
24 BLTB-85-301 1 Kolbenbüchse Piston Bush /
25 BLTB-85-SKX-302 1 Gasdichtung Gas Seal IKH-83.5*93*7.2
26 BLTB-85-SKX-303 2 Abdichtung Step Seal SPNS-83.5
27 BLTB-85-SKX-304 2 O-Ring O-Ring 1BG-115
28 BLTB-85-400 Zylinderkopfaufbau Back Head Assembly /
29 BLTB-85-401 1 Zylinderkopf Back Head /
30 BLTB-85-SKX-402 1 O-Ring O-Ring 1BG-115
31 BLTB-85-403 1 Gasfülventil Gas Charging Valve G 1/2"
32 BLTB-85-SKX-404 1 O-Ring O-Ring 1BP-18
33 BLTB-85-405 1 Gasfülventilabdec. Gas Charging Valve Cover M10*P1.0
34 BLTB-85-SKX-406 1 O-Ring O-Ring 1BP-12
35 BLTB-85-500 Vorderkopfaufbau Front Head Assembly /
36 BLTB-85-501 1 Vorderbüchse Front Head /
37 BLTB-85-502 1 Rückstoßbüchse Thrust Bush Φ85*Φ103*107
38 BLTB-85-504 1 Meisselbüchse Chisel Bush Φ85*Φ121*90
39 BLTB-85-505 2 Meisselstift Chisel Pin 54*30*133
40 BLTB-85-506 1 Büchsenstift Bushing Pin Φ17.5x125
41 BLTB-85-507-P 1 Spizmeissel Moil Point Φ85*850
42 BLTB-85-507-FX 1 Flachmeissel Chisel Point Φ85*850
43 BLTB-85-507-E 1 Stumpfmeissel Blunt Point Φ85*850
44 BLTB-85-507-CX 1 Spartenmeissel Spade Tool Φ85*850
45 BLTB-85-508 3 Gummi Propfen Rubber Plug1 Φ17.5x20.5
46 BLTB-85-509 2 Meisselbüchsenstift Chisel Bush Pin Φ20x153
47 BLTB-85-510 2 Gummi Propfen Rubber Plug2 Φ20x21
48 BLTB-85-511 2 Sperrstift Locking Pin Φ17.5x130
49 BLTB-85-513 3 Schmiernippel Grease Nipple G 1/4"
50 BLTB-85-515 1 Anschlußpropfen Process Plug G 1/4"
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-85-01
P-40-01
5BEILITE
BEILITE BLTB 85 Ersatzteilliste - Spare Parts List
No. ET No.-Part No. St-Qty Beschreibung - DE Description - GB Abmessungen-Dimension
51 BLTB-85-516 4 Bolzen Bolt ST33*3.5*12
52 BLTB-85-SKX-517 1 O-Ring O-Ring 1BP-11
53 BLTB-85-SKX-519 1 O-Ring O-Ring 1BP-11
54 BLTB-85-522 1 Vorderkopf Propfen Front Head Plug G 1/4"
55 BLTB-85-SKX-523 1 O-Ring O-Ring 1BP-11
56 BLTB-85-700 Muterschraubeaufbau Through Bolt Assembly /
57 BLTB-85-701 4 Mutterschraube Through Bolt M33X3.5X795
58 BLTB-85-702 4 Gewindemutter(Oben) Screw Nut(Upper) M33X3.5X48
59 BLTB-85-703 4 Unterlegscheibe Washer Φ50*Φ33*10
Accumulator Warnung
60 1 Warning Open
(öfnnen)
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-85-01
P-40-01
66BEILITE
BEILITE BLTB 85 Ersatzteilliste - Spare Parts List
27 29
28
11 4
30 3 6
12
7
25
8
26 10
9
14
IV. Product identification and position IV. Product identification and pos
1. Beilite sign 5. Rear cylinder warning sign 1. Beilite
7. Beilite
sign sign 5. Rear
15 It includes the relevant parameters
Warning of the product which must be
DISCHARGE
confirmed when you purchase the DISCH
6 RIOR TO product. RIOR
DISASSEMBLY DISAS
34 5 23 Beilite Machinery Co., Ltd.
USE ONLY NITROGEN Weight kg U
2. Grease nipple 2. 18
Grease nipple
Length mm
Required oil Flow L/min
6. Accumulator warning sign Working pressure kg/cm26. Accum
Warning Impact Rate b.p.m
2 162 hours
Every Every 2 hours
DISCHARGE
Hose Diameter In DISCH
PRIOR TO Chisel Diameter mm PRIOR
21
DISASSEMBLY Chisel Length mm DISAS
It refers to the oil injection port. It is 22 It refersApplicable Excavator
to the oil injection m2is
port. It
recommended to add grease every USE ONLY NITROGEN recommended to add grease every Ton
13
two hours and grease can be added two hours and grease can be added
IV. Product identification andtime
at any position
when it is found that the IV. Product identification andtime
at any position
when it is found that the
chisel is dry. chisel is dry.
20
1. Beilite sign 5. Rear cylinder warning sign 22 7. Beilite 1. sign
Beilite sign 5. Rear cylinder warning sign
7. Beilite sig
3. Valve adjuster It includes the relevant parameters 3. Valve adjuster It includes th
Warning 8. Operation precautions Warning8. Opera
19 of the product which must be of the produc
DISCHARGE 20 confirmed when you purchase the DISCHARGE
confirmed w
RIOR TO The operator should pay attention toRIOR
product. theTOfollowing items when using The op
product.
DISASSEMBLY
the hydraulic DISASSEMBLY
breaker
Valve Adjuster Beilite Machinery
Check before Co.,startLtd.
up: •Valve
WhenAdjuster
disassembling the Beilite Macb
Check
USE ONLY NITROGEN Weight
• 2.Check whether kg
the main hydraulic breaker, protect theWeight
2. Grease nipple
USE ONLY NITROGEN
• Che
Length Grease nipple mm Length
engine is equipped
Required oil Flow L/min
Version
with 2019in/out adapter port and prevent eng
Required oi
21 6. Accumulator warning sign Working sufficient
pressure hydraulic kg/cmoil2 and external impurities
6. Accumulator warning sign from Workingsuff
pr
(Note: Be sure to adjust the pressure (Note: Bepolluting
sure to adjust the pressure
Warning Impact whether
Rate the hydraulic
b.p.m oil is hydraulic
Warning oil. Impact whe
Rate
Every 2 hours when the hydraulic breaker stops) Hose clean.
Diameter Every 2 hours
Otherwise, In please add when
or •the Carry
hydraulic out breaker stops)and Hose Diam
maintenance clea
IV. Product identification and position
To regulating
DISCHARGE
PRIOR TO
the return IV. Product identification and position
pressure, replace hydraulic
Chisel Diameter mmoil timely. To regulating
DISCHARGE
replace
PRIOR TO
thethereturn pressure,
hydraulic oil and Chisel Diam
repl
you canDISASSEMBLY
adjust the hitting power and Chisel • Length
Before starting mm
work, please you canDISASSEMBLY
adjust
filter the hitting power and Chisel • Leng
1. Beilite sign 5. Rear cylinder warning sign 7. Beilite sign 1. Beilite sign 5. Rear cylinder warning sign 7. Beilite signelement timely. Bef
It refers to the oil injection port. It frequency.
is It includesIfthe
the adjustment is Applicable Excavator m It frequency. Ifthe
the adjustment is
2
relevant parameters Itwarm
refers up theoilmain
to the injectionengine
port.for • When
is It includes loading
relevant the hydraulic
parameters Applicable
war
recommended to add grease every improper, the
USEhydraulic mustbreaker will Ton
theimproper, the
USEhydraulic mustbreaker
removewill
Warning of the product whichNITROGEN
be recommended Warning
to add grease every of the product which be
ONLY 10 minutes to ensure that breaker, ONLY please
NITROGEN the 10 m
two hours and grease can be added confirmed when you purchase
stop, so it is prohibited to make the two DISCHARGEof hydraulic oil stop,
hours and grease can be added confirmed when
so itchisel. you purchase
is prohibited to make the
DISCHARGE
at any RIOR
timeTOwhen it is found that the product. temperature is product. tem
adjustment randomly. at any time
RIOR TOwhen it is found that theadjustment randomly.
DISASSEMBLY
chisel is dry. suitable.
chisel
DISASSEMBLY
is dry. • Main inspection points: suit
Beilite Machinery Co., Ltd. • Check whether there is oil • Check
Beilite Machinerywhether the stop valve • Che
Co., Ltd.
USE ONLY NITROGEN
3. Valve adjuster 4. Nitrogen
Weight gas charging
8. Operation precautions pressure
kg 3.leakage at the in/out adapters4. Nitrogen
USE ONLY NITROGEN
Valve adjuster Weight gasprecautions
is fully
8. Operation charging
open; kg pressure leak
2. Grease nipple 2. Grease nipple
31 Length
Required oil Flow
mm
L/min and whether the bolts are
Length
• Check
Required
32 whether L/min
oil Flow
mm
the oil pipe and
6. Accumulator warning sign The operator
Working should pay attention to the following loose. items when
Otherwise,
6. Accumulator using
tighten
warning signthe The operator
shakes should pay
abnormally; attention to the follow
loos
N2 GASpressure
CHARGE kg/cm2 Working
N2 GAS pressure
CHARGE kg/cm 2
the hydraulic breaker the hydraulic breaker
Warning
Valve Adjuster Impact Rate b.p.m joints or bolts
Valve to the specified Impact
Warning
Adjuster • CheckRate whether b.p.m the hydraulic join
Every 2 hours Check before
Hose Diameter start up:
Every
In 2 hours • When disassembling the Check before
Hose Diameter start up: In • When dis
DISCHARGE
• Check whether the main torque.
hydraulic DISCHARGE
breaker, protect the • Checkoil iswhether
sufficient and clean;
the main torq
hydraulic
PRIOR TO Chisel Diameter mm Chisel Diameter mm
DISASSEMBLY engine
Chisel is equipped with
Length mm • Add
in/out adapter
PRIOR TO
grease to the hydraulic
port and prevent
DISASSEMBLY • Check
engine
Chisel whether
is equipped with
Length the
mm system • Add
in/out ada
Jede 2 stunden Ventil Einstellung N2 Fülling
sufficient
Applicable Jede 2moil
hydraulic
Excavator stunden
2 and external Ventil
breaker Einstellung
timely.
impurities from N2 Fülling
pressure
sufficient
Applicable is normal;
hydraulic
Excavator moil
2 and breai
external
It refers to the oil injection port. It is(Note: Be sure to adjust the pressure
It indicates It refers to the
the charging oil injection
pressure of port.polluting
It is(Note: Be sure to adjust the pressure
recommended to add grease every when the hydraulic whether the hydraulicTon oil is • hydraulic
Attention: oil. It indicates
• the charging
Check
whether whether
the hydraulicpressure
the
Ton oil
oil is of • Atte
polluting
USE ONLY breaker
NITROGEN stops) the rear clean. recommended to add grease every when the USE ONLY breaker
hydraulic NITROGENstops)
two hours and grease can be added cylinder twoand
Otherwise, accumulator.
hours please add can
and grease or be• added
Carry
• To Do outnot
maintenance
use the hydraulic the rear clean.
and
thisreturn cylinder and accumulator.
Otherwise,
temperature isplease
normal; add or • Carry• Do out
To regulating the return pressure, regulating oil andpressure, Gas should
at any time when it is found that the
you can adjust the hitting power and
Gas should be hydraulic
replace charged inwhen
at any timeoil strict
timely.
it is found thatreplace the hydraulic
the breaker for underwater • Beforebe hydraulic
replace
Check charged
whether inthe
oil strict
timely.
filter
replace th
brea
chisel is dry. • Before starting work, please filter you can adjust
element the hitting power and
timely. • starting work, please filter elem
accordance with the indicated scope
chisel is dry.
operations. (Ifadjustment
underwater accordance with the indicated scope
element
frequency. If the adjustment is warm up the main engine for •
When frequency.
loading theIf the
hydraulic is warm up theismain
clean;
engine for • Whenope loa
3. Valve adjuster improper, the hydraulic of pressure.
breaker will 10 minutes to ensure that the improper,
operations
breaker, the hydraulic
are the breaker
needed, pleaseof pressure.
will opep
8. Operation precautions 3. Valve adjuster 8.please remove
Operation precautions 10 minutes to ensure that the breaker,
stop, so it is prohibited to make stop, so it the
is prohibited to make
temperature of hydraulic oil is consult
chisel. Beilite Company or temperature of hydraulic oil is con
chisel.
adjustment randomly.
The operator should pay attention to thesuitable.
following items when using • Mainadjustment
inspection
The randomly.
points:
operator should pay attention to thesuitable.
following items when using • Maintheinsp
the designated agent.)
the hydraulic •breaker
Check whetherValve thereAdjuster
is oil • Check whether the stop valve the hydraulic •breaker Check whether there is oil • Check wh
Valve Adjuster 4. Nitrogen gas charging
Check before start up: pressure • When disassembling
leakage theadapters
at the in/out 4. Nitrogen
is fully gas charging
Check before
open;
Beilite
start up: Machinery
pressure • When Co., Ltd.
disassembling theadapters
leakage at the in/out is fully op
• Check whether the main hydraulic breaker,
and whether theprotect
bolts arethe • Check
• Check whether thewhether
oil pipethe main hydraulic breaker,
and whether theprotect the
bolts are • Check wh
© 2020
© 2020 Taizhou
Taizhou Beilite
Beilite Machinery
Machinery Co.
Co. ltd.
ltd.
(Note: Be sure to adjust the pressure
engine is equipped with
N2sufficient
GAS CHARGEhydraulic oil and
whether the hydraulic oil is
-- No.
No. 2020
in/out
loose.
2020 P-40-01
adapter
P-85-01
Otherwise,
port andtighten
external impurities from
joints or (Note:
bolts toBethe
polluting hydraulic
preventthe
specified
shakes engine is equipped with
abnormally;
N2sufficient
GAS CHARGE
• Check whether the hydraulic
oil.sure to adjust the pressure
hydraulic oil and
whether the hydraulic oil is
in/out adapter port and
loose. Otherwise, tighten
external impurities from
joints or bolts to the specified
polluting hydraulic oil.
7
6
preventthe
•
shakes ab
Check wh
when the hydraulic breaker stops) clean. Otherwise, please add or • Carry torque. when the hydraulic
out maintenance and oil is sufficient
breaker stops) clean.and clean; please add or • Carry
Otherwise, torque.
out maintenance and oil is suff
To regulating the return pressure, replace hydraulic oil timely. • replace
Add grease
the To to the oil
hydraulic
regulating
hydraulic • Check whether
the return pressure,
and the hydraulic
replace system oil timely. • replace
Add grease to the oil
the hydraulic hydraulic
and • Check whBEILITE
BEILITE BLTB 85 Ersatzteilliste - Spare Parts List
No. ET.No-PartNo. St-Qty Beschreibung - DE Description - GB Abmessungen-Dimension
1 BLTB-85-900 Rahmenmontage Frame ass'y
2 BLTB-85-901 1 Rahmen (Kasten Typ) Frame(box type) 1352×580×450
3 BLTB-85-902 1 Abdeckung Cover 400×35×10
4 BLTB-85-903 12 M/C Sechskantschraube M/c hex bolt M20×90
5 BLTB-85-904 12 M/C Sechskantmutter M/c hex nut M20
6 BLTB-85-905 24 M/C Spanscheibe M/c spring washer φ20
7 BLTB-85-914 1 Abdeckungplatte-A Cover plate-a 168×166×7
8 BLTB-85-915 1 Abdeckungplatte-B Cover plate-b 256×172×7
9 BLTB-85-916 8 Sechskantschraube Hex bolt M10×30
10 BLTB-85-917 8 Abdichtung Washer φ10
11 BLTB-85-919 2 Ein/Aus Propfen In/out plug G3/4"
12 BLTB-85-920 1 Ein/Aus Propfenabdec. In/out plug cover φ30
13 BLTB-85-924 4 Gummi Propfen Rubber plug Ø35*T16
14 BLTB-85-925 2 Gummi Propfen Rubber plug Ø40*T17
15 BLTB-85-926 4 Gummi Propfen Rubber plug 66*38*T16
16 BLTB-85-927 2 Gummi Propfen Rubber plug 170*50*T17
17 BLTB-85-940 Pufferplattenaufbau Buffer plate ass'
18 BLTB-85-941 1 Hintererdämpfer Back buffer 185×159×129
19 BLTB-85-942 1 Untererdämpfer Lower damper 192×166×20
20 BLTB-85-944 2 Seitendämpfer Side damper 400×155×16
21 BLTB-85-945 2 Ober/Unterdämpfer Up&down damper 400×155×16
22 BLTB-85-946 2 Seitendämpfer Side damper 200×155×16
23 BLTB-85-947 2 Seitendämpfer Side damper 160×80×16
24 BLTB-85-950 Autolub System Autolub system
25 BLTB-85-951 1 Autolub System Autolub system SMALL SIZE
26 BLTB-85-952 1 Ölhaus Propfen Oil hose plug G1/4"×520
27 BLTB-85-953 4 Sechskantschraube Hex bolt M10×120
28 BLTB-85-954 4 Abdichtung Washer φ10
29 BLTB-85-956 1 Autolub Abdeckung Autolub tool cover SMALL SIZE
30 BLTB-85-957 4 Autolubmutter Autolub tool nut φ18×φ12×35
31 1 Jede 2 Stunden Aufkleber Every 2 Hours Sticker
33 1 N2 Füllung Aufkleber N2 Gas Charge Sticker
34 1 Beilite Anschweissplatte Beilite Welding Plate
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-85-01
P-40-01
8
7BEILITE
BEILITE BLTB 85 Ersatzteilliste - Spare Parts List
ABMESSUNGEN
DIMENSIONS
in mm
85
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-85-01
P-40-01
8
933
34 3 80 420 4.3
BEILITE
BEILITE
4 BLTB
8085 Ersatzteilliste - Spare Parts List
420 4.3
29
5 125 46
420 36 4.4
30
6
MEISSEL 125
24 420 4.4
TOOLS
7 25 - 39
420 40 45 3.7
27 26 45 40
8
Breite ET No.
40 Länge Gewicht
420
Beschreibung
3.8
No. 37
Width Part No Length Weight Description
41 85 BLTB-85-507-P 850 34.00 Moil Point
42 85 BLTB-85-507-FX 850 34.00 Chisel Point
43 85 BLTB-85-507-E 48 850 34.00 Blunt Point
44 160 3 BLTB-85-507-CX 750 40.00 Spade Tool38
8
7
12
1 2 3
15 16
B 2
11
10 9
13 14
4
5
-P -FX -E -CX
6
A 41 42 43 44
44
Version 2019 s/n BLTB45-
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-85-01
P-40-01
10
9BEILITE
BEILITE BLTB 85 Ersatzteilliste - Spare Parts List
DICHTSATZ BLTB-85-SKX
SEAL KIT
Abmessungen
No. ET No.-Part No St-Qty Beschreibung - DE Description - GB
Dimension
- BLTB-85-SKX
5 BLTB-85-SKX-104 1 Dichtung U-Packing ISI BLTB-85*100*9
6 BLTB-85-SKX-105 1 Staubdichtung Dust Seal DSI BLTB-85*95*6*8
8 BLTB-85-SKX-107 4 O-Ring O-Ring 1BP-18
11 BLTB-85-SKX-110 2 O-Ring O-Ring 1BP-24
13 BLTB-85-SKX-112 1 O-Ring O-Ring 1BP-18
15 BLTB-85-SKX-120 1 Weißer Propfen White Plug T/P Φ15*Φ11*14
16 BLTB-85-SKX-122 1 O-Ring O-Ring 1BP-11
21 BLTB-85-SKX-204 1 O-Ring O-Ring 1BG-45
22 BLTB-85-SKX-205 1 O-Ring O-Ring 1BG-30
25 BLTB-85-SKX-302 1 Gasdichtung Gas Seal IKH-83.5*93*7.2
26 BLTB-85-SKX-303 2 Abdichtung Step Seal SPNS-83.5
27 BLTB-85-SKX-304 2 O-Ring O-Ring 1BG-115
30 BLTB-85-SKX-402 1 O-Ring O-Ring 1BG-115
32 BLTB-85-SKX-404 1 O-Ring O-Ring 1BP-18
34 BLTB-85-SKX-406 1 O-Ring O-Ring 1BP-12
52 BLTB-85-SKX-517 1 O-Ring O-Ring 1BP-11
53 BLTB-85-SKX-519 1 O-Ring O-Ring 1BP-11
55 BLTB-85-SKX-523 1 O-Ring O-Ring 1BP-11
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-85-01
P-40-01
10
11BEILITE BLTB 85
53
75 Ersatzteilliste
Ersatzteilliste -- Spare
Spare Parts List
WERKZEUGKISTE
TOOLKIT
Abmessungen
No. ET No.-Part No St-Qty Beschreibung - DE Description - GB
Dimension
1 1 Maulschlüssel Open Spanner 17-19
2 1 Maulschlüssel Open Spanner 19-22
3 1 Maulschlüssel Open Spanner 27-30
4 1 Maulschlüssel Open Spanner 32-36
5 1 Schlagschrauber Striking Wrench 50
6 1 Sechskantschlüssel Hex Key Wrench 8
7 1 Sechskantschlüssel Hex Key Wrench 10
8 1 N2 Füllgerät N2 Charging Kit 8MPa
9 1 Sperrstift Knockout Pin φ11.5*260
10 1 Maschinen augenschraube Machine Eye Bolt M10
11 1 Maschinen augenschraube Machine Eye Bolt M12
12 1 Maschinen augenschraube Machine Eye Bolt M16
13 1 Ratschenschlüssel Socket Wrench 14
14 BLTB-85-513 3 Schmiernippel Grease Nipple G1/4
15 BLTB-85-508 3 Gummi Platten Rubber Plug φ17.5
16 BLTB-85-510 2 Gummi Platten Rubber Plug φ20
N2 FÜLL SATZ
N2 FILLING GEAR
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-85-01
P-40-01 111
12BEILITE BLTB 85 Ersatzteilliste - Spare Parts List
OPTIONEN
OPTIONAL EQUIPMENT
ET No.Part No St-Qty Beschreibung - DE Description - GB
Fettpresse 500gr Greasegun 500gr
1
2 Hand 2 Hand
Meissel pasta kartouch Grease Cartridge
1
500gr 500gr
FETTPRESSE
GREASE GUN
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-85-01
P-40-01 12
13www.beilite.com
www.beilite-europe.com
Any unauthorized use or copying of the contents or any part thereof is prohibited.
®
This applies in particular to trademarks, model denominations, part numbers and
drawings.
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-85-01 1You can also read
