BEILITE BLTB 125A - ACDE Europe GmbH
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
BEILITE BLTB 125A Ersatzteilliste - Spare Parts List
125A
Seriennummer: bis
®
Serial number: up to
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-125A-01
BEILITE BLTB 125A Ersatzteilliste - Spare Parts List
ORIGINAL BEILITE ERSATZTEILLE
Echte Beilite–Ersatzteile werden nach dem neuesten technologischen Erkenntnisstand und mit modernsten
ingenieurtechnnischen Mitteln konzipiert und gefertigt. Beilite-Erzatzteile werden aus den besten auf dem Markt
erhältlichen Materialien und mit Hilfe modernster Fertigungmethoden hergestellt.
Es ist von größter Wichtigkeit, dass Sie nur echte Beilite-Ersatzteile verwenden, um auf diese Weise einen
problemlosen Betrieb sowie eine leichte Wartung und Reparatur des Hammers sicherzustellen. Bitte beachten Sie,
dass eventuelle Garantieansprüche nur dann bearbeitet werden können. Wenn Sie echte Beilite-Ersatzteile fur Ihren
Hammer verwendet haben.
VERMERK DER SERIENNUMMER
Es ist wichtig, dass Sie bei der Bestellung von Ersatzteilen die korrekte Seriennummer des Hammers angeben kön-
nen. Die Seriennummer bietet die einzige Möglichkeit, die zu einem bestimmten Hammer gehörigen Teile zu
identifizieren. Die Serienummer des Hammers ist in den Ventilkörper eingeschlagen. Die Seriennumer ist ebenfalls auf
dem CE-Schild am Hammergeäuse vermerkt.
ERSATZTEILBESTELLUNG
Präzise Bestellungen bilden die Grundlage für schnelle Ersatzteillieferungen.
Erforderliche Angaben:
• Name des Kunden und der Kontaktperson
• Bestellnummer (falls vorhanden)
• Lieferanschrift
• Lieferart (Luftpost, ect.)
• Gewünschter Liefertermin
• Rechnungsanschrift
• Modell und Serienummer des Hammers
• Bezeichnung, Nummer und erforderliche Anzahl der Ersatzteile
GENUINE BEILITE SPARE PARTS
Beilite genuine spare parts are designed and manufactured by using the latest technological knowledge and
engineering skills. Beilite spare parts are made of the best availible materials with the most advanced manufactering
techniques.
It is important that you use only genuine Beilite spare parts, to ensure easy operation, maintenance and repair of the
product. Please note that eventual warranty claims will be handled only if you have used genuine Beilite parts in your
Beilite.
LOCATION OF THE SERIAL NUMBER
It’s important to make correct reference to the serial number of the product when ordering spare parts. Identification of
serial number is the only proper means of maintaining and identifying parts for a specific product. The location of
equipment serial number is pointed in “Operation and maintenance” manual.
SPARE PARTS ORDERS
Quick spare parts deliveries are secured by exact orders.
Requierd information:
• Name of customer and contact person
• Order number (when available)
• Delivery address
• Mode of delivery (air mail ect.)
• Required delivery date
• Invoicing address
• Model and serial number of the product
• Name, number and required amount of spare parts
© 2020 Taizhou Beilite Machinery Co. ltd. P-125A-01
- No. 2020 P-40-01
2
BEILITE BLTB 125A Ersatzteilliste - Spare Parts List Inhalts verzeichnis - Abmessungen 8 - Akkumulator 11 - Anzugsmomenten 4 - Dichtsatz 10 - Ersatzteilliste 4 - Fettpresse 13 - Gehäuse 6 - Meissel 9 - N2 Füll Satz 12 - Optionen 13 - Werkzeugkiste 12 Contents - Accumulator 11 - Dimensions 8 - Grease gun 13 - Housing 6 - N2 Filling Gear 12 - Optional Equipment 13 - Seal Kit 10 - Spare Part List 4 - Toolkit 12 - Tools 9 - Torque Moments 4 © 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-125A-01 3
BEILITE BLTB 125A Ersatzteilliste - Spare Parts List
56
74 55
38
40
53 14
75
52
37 35
39 54
50
46 51
36
42
30
73
31
33 32 45
28
3
27 43
24
25
44
21 26 7
22 12
20 19 8
13 14
11
64 2
10
9 51
65
15
62
69 58 17
16
63 4
67 5
6
66
60 71
59 61 70
68
IV. Product identification and position IV. Product identification and position
No. Anzugsmoment 1. Beilite sign 5. Rear cylinder warning sign 7. Beilite1.sign
Beilite sign
It includes the relevant parameters
-P -FX
5. Rear cylinder warning sign 7. Beilite sign
-E
It includes the relevant parameters
Tightening torques
Warning of the product which must be 47
Warning
48 49
of the product which must be
confirmed when you purchase the 49 50 51 the
confirmed when you purchase
Version 2019 s/nproduct. BLTB125A-
DISCHARGE DISCHARGE
RIOR TO product. RIOR TO
7 225-235Nm DISASSEMBLY
Beilite Machinery Co., Ltd.
DISASSEMBLY
Beilite Machinery Co., Ltd.
9 360-370Nm
IV. Product identification and 2.position
Grease nipple IV. Product identification
USE ONLY NITROGEN
76
Weight
and position nipple kg
Length 2. Grease77 mm
USE ONLY NITROGEN Weight
Length
kg
mm
Required oil Flow L/min Required oil Flow L/min
12 130-140Nm
1. Beilite sign 5. Rear Achtung!
cylinder warning sign 7. Beilite1.sign
Beilite Achtung!
sign
6. Accumulator warning sign
It includes the relevant parameters
5. Rear Achtung!
cylinder
Working pressure
warning
kg/cm
2 sign 7. Beilite sign Achtung!
6. Accumulator warning sign
It includes the relevant parameters
Working pressure kg/cm 2
Impact Rate Warningb.p.m Impact Rate b.p.m
Warning of the product whichWarning of the product whichWarning
20 100Nm DISCHARGE
DISCHARGE
Every 2 hours must be
confirmed when you purchase the
DISCHARGE
Hose Diameter
DISCHARGE
DISCHARGE
Chisel Diameter
Every 2 hours
In
mm
must be
confirmed when you purchase the
DISCHARGE
Hose Diameter
Chisel Diameter
In
mm
PRIOR TO product. PRIOR TO PRIOR TO PRIOR TO
product.
130-140Nm It refers to the oil injection port. It Beilite
RIOR TO RIOR TO
37 DISASSEMBLY
DISASSEMBLY
is
DISASSEMBLY
DISASSEMBLY
Machinery Co., Ltd.
Chisel Length
DISASSEMBLY
DISASSEMBLY
Applicable Excavator 2
mm
m
It refers to the oil injection port. It Beilite
is
DISASSEMBLY
DISASSEMBLY
Machinery Co., Ltd.
Chisel Length
Applicable Excavator
mm
m 2
Tongrease every Weight Ton
39 50Nm
2. Grease nipple
recommended to add grease every Weight
USE ONLY NITROGEN
two hours and grease can be added Length 2.
USE ONLY NITROGEN
Grease nipple
kg
mm
recommended to add
USE ONLY NITROGEN
two hours and grease can be added Length
USE ONLY NITROGENkg
mm
N2 ablassen von when
at any time demontage N2 ablassen
it is found that theRequired von demontage N2 ablassen von when
at any time demontage N2 ablassen
it is found that theRequired von demontage
51 60-70Nm 6.NarAccumulator N2 verwenden
chisel is dry.warning sign
oil
Working pressure
Flow
Nar N2 verwenden
L/min
kg/cm2 6.Nar N2 verwenden
Accumulator
chisel is dry.warning sign
oil Flow
Nar N2 verwenden
Working pressure
L/min
kg/cm 2
Warning Impact Rate b.p.m Warning Impact Rate b.p.m
52 80-90Nm
Every 2 hours 3. Valve
DISCHARGE
adjuster 8. Operation
Hose Diameter Every 2 hours
precautions
In 3. Valve
DISCHARGE
adjuster 8. Operation precautions
Hose Diameter In
PRIOR TO Chisel Diameter mm PRIOR TO Chisel Diameter mm
64 80Nm DISASSEMBLY The
Chisel
Applicable
operator should
Length
Excavator
mmpay attention to the following items when using
m the hydraulic
2
DISASSEMBLY
breaker
The
Chisel operator should
Length mmpay attention to the following items when using
Applicable Excavator m the hydraulic breaker
2
It refers to the oil injection port. It is Valve Adjuster It refers to the oil injection port. It is Valve Adjuster
66 recommended 50Nm
to add grease every
two hours and grease can be added
USE ONLY NITROGEN
Check before start up:
• recommended
Check whethertothe
two hours
Ton
addmain
grease every
and greasewith
• When disassembling the
USE ONLY NITROGEN
hydraulic breaker, protect the
can be added in/out adapter port and prevent
Check before start up: Ton
• Check whether the main
• When disassembling the
hydraulic breaker, protect the
engine is equipped engine is equipped with in/out adapter port and prevent
68 chisel is dry.
250Nm
at any time when it is found that the
(Note: Be sure to adjust the pressure
atsufficient
any timehydraulic
chisel is dry.
when it isoil
found
and that the external impurities from
(Note: Be sureoil.to adjust the pressure
sufficient hydraulic oil and external impurities from
whether the hydraulic oil is polluting hydraulic whether the hydraulic oil is polluting hydraulic oil.
69 480Nm
3. Valve adjuster
when the hydraulic breaker stops)
8. Operation precautions
To regulating the return pressure,
clean.
3.replace
Otherwise,
Valve hydraulic
please add
adjuster oil timely.
or • Carry when
out
8. Operation
replaceTothe
the hydraulicand
maintenance
precautions
regulating
hydraulic
breaker stops)
theoilreturn
and pressure,
clean. Otherwise, please add
replace hydraulic oil timely.
or • Carry out maintenance and
replace the hydraulic oil and
you can adjust the hitting power and you can adjust the hitting power and
73 3000Nm Thefrequency.
operator If the adjustment
should pay attention
• Before starting work, please
is to the followingwarm up items whenengine
the main using for
filter element timely.
• When Thefrequency.
operator
loading theIf the adjustment
should is to the Version
pay attention
hydraulic following
warm up items 2019
when
the main using fors/n
• Before starting work, please
engine • BLTB125A-
filter element timely.
When loading the hydraulic
improper, the hydraulic thebreaker willbreaker10 minutes to ensure that the
hydraulic breaker,improper, the hydraulic
please remove thethebreaker willbreaker10 minutes to ensure that the
hydraulic breaker, please remove the
Valve Adjuster stop,before
so it is prohibited to make • When temperature Valve Adjuster stop,before
so it is prohibited to make • When temperature
Check start up: disassembling of the
hydraulic oil is Check
chisel. start up: disassembling of the
hydraulic oil is chisel.
• adjustment
Check whether randomly.
the main hydraulic breaker, protect the
suitable. • • adjustment
Check randomly.
whether
Main inspection points: the main hydraulic breaker, protect the
suitable. • Main inspection points:
engine is equipped with in/out adapterwhether
• Check port andthere
prevent
is oil • Checkengine is equipped
whether with
the stop valve in/out adapterwhether
• Check port andthere
prevent
is oil • Check whether the stop valve
4. Nitrogen
sufficient gas charging
hydraulic oil andpressure external impurities
leakage thefrom 4. Nitrogen
sufficient gas charging
hydraulic oil andpressure external impurities
at thefrom
(Note: Be sure to adjust the pressure whether the hydraulic oil is (Note:
polluting Beatsure
hydraulic
in/out
to
oil.
adapters
adjust the pressure is fully open; leakage in/out adapters is fully open;
and whether the bolts are stops) • Checkwhether
whetherthethehydraulic
oil pipe oil is polluting
andhydraulic
whether theoil.bolts are • Check whether the oil pipe
4
when the hydraulic breaker stops) when the hydraulic breaker
© 2020 Taizhou
the return pressure,Beilite Machinery Co. ltd. - No. 2020 P-125A-01
P-40-01
clean. Otherwise, please add or • Carry loose. out maintenance
Otherwise, and
tighten the shakes clean. Otherwise, please add or • Carry loose.
abnormally; out maintenance
Otherwise,and tighten the shakes abnormally;
To regulating N2 GAS CHARGE Tothe
regulating the return pressure, N2 GAS CHARGE
replace hydraulic oil timely. replace jointshydraulic
• bolts tooiltheand • Checkreplace hydraulic oil timely. replacejoints
the hydraulic
or bolts tooiltheand
you can adjust the hitting power and • Before starting work, please filter you canoradjust specified
timely.the hitting power and
whether the hydraulic specified Check whether the hydraulic
frequency. If the adjustment is
element
torque.
frequency. oil• is Before starting
sufficient work, please
and clean; filter element
torque. timely. oil is sufficient and clean;
warm up the main engine for • When loading
• improper, theIfto
the adjustment is
hydraulic Checkwarm up the
themain engine for • When loading the to
hydraulic
improper, the hydraulic breaker will 10 minutes to ensure that the breaker,
Add grease
please the hydraulic
remove the breaker will•
the hydraulic
10
whether
minutes to
system
ensure that the
• Add
breaker,
grease
please remove
the hydraulic
the
• Check whether the system
stop, so it is prohibited to make breaker timely. pressure is normal; breaker timely. pressure is normal;
It indicates the
temperature of charging oil is of chisel.stop, so it is prohibited to make
hydraulicpressure It indicates the
temperature of charging
hydraulicpressure
oil is of chisel.BEILITE BLTB 125A Ersatzteilliste - Spare Parts List
No. ET No.-Part No. St-Qty Beschreibung - DE Description - GB Abmessungen-Dimension
1 BLTB-125A-100 Zylinderaufbau Cylinder Assembly /
2 BLTB-125A-101 1 Zylinder Cylinder /
3 BLTB-125A-102 1 Kolben Piston /
4 BLTB-125A-SKX-103 1 Pufferring Buffer Ring HBY 125*140.5*6
5 BLTB-125A-SKX-104 1 Dichtung U-Packing IDI 125*140*10
6 BLTB-125A-SKX-105 1 Staubdichtung Dust Seal DSI 125*138*7*9.5
7 BLTB-125A-106 3 Pfropfen Plug M25*2
8 BLTB-125A-SKX-107 3 O-Ring O-Ring 1BP-22A
9 BLTB-125A-108 2 Ein/Aus Adapter In/Out Adapter G 1"
10 BLTB-125A-109 2 Ein/Aus Adapter Abdeckung In/Out Adapter Cover G 1"
11 BLTB-125A-SKX-110 2 O-Ring O-Ring 1BP-29
12 BLTB-125A-111 1 Schnellentlüftungsventil Exhaust Valve G 1/2"
13 BLTB-125A-SKX-112 1 O-Ring O-Ring 1BP-18
14 BLTB-125A-113 2 Führungsstift Guide Pin Φ12.5*30
15 BLTB-125A-114 4 Bolzen Bolt ST20*2.5*12
16 BLTB-125A-SKX-120 1 Weißer Propfen White Plug T/P Φ15*Φ11*14
17 BLTB-125A-SKX-122 1 O-Ring O-Ring 1BP-11
18 BLTB-125A-150 Ventileinsteller Valve Adjuster Assembly /
19 BLTB-125A-151 1 Ventil Valve M16*P1.5*60
20 BLTB-125A-152 1 Ventilschraube Valve Nut M16*P1.5*14
21 BLTB-125A-SKX-153 1 O-Ring O-Ring 1BP-9
22 BLTB-125A-SKX-154 1 Weißerring White Ring T3P-9
23 BLTB-125A-200 Ventilaufbau Valve Assembly /
24 BLTB-125A-201 1 Ventilhülle Valve Cover /
25 BLTB-125A-202 1 Ventil Valve /
26 BLTB-125A-203 1 Ventilhülse Valve Sleeve /
27 BLTB-125A-SKX-204 1 O-Ring O-Ring 1BG-60
28 BLTB-125A-SKX-205 1 O-Ring O-Ring 1BG-45
29 BLTB-125A-300 Kolben Buchse Aufbau Piston Bush Assembly /
30 BLTB-125A-301 1 Kolbenbuchse Piston Bush /
31 BLTB-125A-SKX-302 1 Gasdichtung Gas Seal IKH-123.5
32 BLTB-125A-SKX-303 2 Abdichtung Step Seal SPNS-123.5
33 BLTB-125A-SKX-304 2 O-Ring O-Ring 1BG-150
34 BLTB-125A-400 Zylinderkopfaufbau Back Head Assembly /
35 BLTB-125A-401 1 Zylinderkopf Back Head /
36 BLTB-125A-SKX-402 1 O-Ring O-Ring 1BG-150
37 BLTB-125A-403 1 Auffülventil Gas Charging Valve G 1/2"
38 BLTB-125A-SKX-404 1 O-Ring O-Ring 1BP-18
39 BLTB-125A-405 1 Auffülventilabdeckung Gas Charging Valve Cover M10*P1.0
40 BLTB-125A-SKX-406 1 O-Ring O-Ring 1BP-12
41 BLTB-125A-500 Vorderkopfaufbau Front Head Assembly /
42 BLTB-125A-501 1 Vorderebuchse Front Head /
43 BLTB-125A-502 1 Rückstoßbuchse Thrust Bush Φ125*Φ151*158
44 BLTB-125A-504 1 Meisselbüchse Chisel Bush Φ125*Φ178*115
45 BLTB-125A-505 2 Meisselstift Chisel Pin 76*40*256
46 BLTB-125A-506 4 Buchsenstift Bushing Pin Φ20*Φ23*221
47 BLTB-125A-507-P 1 Spitzmeissel Moil Point Φ125*1100
48 BLTB-125A-507-FX 1 Flachmeissel Chisel Point Φ125*1100
49 BLTB-125A-507-E 1 Stumpfmeissel Blunt Point Φ125*1100
50 BLTB-125A-508 4 Kreisring Puring Φ20*Φ28*12
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-125A-01
P-40-01 5BEILITE
BEILITE BLTB 125A Ersatzteilliste - Spare Parts List
No. ET No.-Part No. St-Qty Beschreibung - DE Description - GB Abmessungen-Dimension
51 BLTB-125A-SKX-205 2 Schmiernippel Grease Nipple G 1/4"
52 BLTB-125A-300 1 Anschlussstopfen Process Plug G 3/8"
53 BLTB-125A-301 4 Bolzen Bolt ST42*3.0*16.5
54 BLTB-125A-SKX-302 1 O-Ring O-Ring 1BP-11
55 BLTB-125A-SKX-303 1 O-Ring O-Ring 1BP-16
56 BLTB-125A-SKX-304 1 O-Ring O-Ring 1BP-16
57 BLTB-125A-400 Gasspeicheraufbau Accumulator Assembly /
58 BLTB-125A-401 1 Gasspeicherboden Accumulator Bottom /
59 BLTB-125A-SKX-402 1 Gasspeicherdeckel Accumulator Cover /
60 BLTB-125A-403 1 Membrane Diaphragm Φ150*40
61 BLTB-125A-SKX-404 1 Inneresventil Inner Valve Assembly Φ59*14
62 BLTB-125A-405 1 Gaseinstelvorrichtung Gas Charging Adjuster M12*P1.25
63 BLTB-125A-SKX-406 1 O-Ring O-Ring 1BP-5
64 BLTB-125A-500 1 Gasauffülkappe Gas Charging Cap M12*P1.25
65 BLTB-125A-501 1 O-Ring O-Ring 1BP-14
66 BLTB-125A-502 1 Gasspeicherpropfen Acc'cover Plug M10*P1.0
67 BLTB-125A-504 1 O-Ring O-Ring 1BP-12
68 BLTB-125A-505 12 Innererdeckelstift Inner Cover Hex.socket Bolt M14X1.5X40
69 BLTB-125A-506 4 Innererbodenstift Inner Bottom Hex.socket Bolt M20X2.5X55
70 BLTB-125A-507-P 1 O-Ring O-Ring 1BP-95
71 BLTB-125A-507-FX 1 Weißer Ring White Ring 4BP-95
72 BLTB-125A-507-E Mutterschraubeaufbau Through Bolt Assembly /
73 BLTB-125A-508 4 Mutterschraube Through Bolt RD42X4.233X916
74 4 Gewindemutter Screw Nut(Upper) RD42X4.233X60
75 4 Unterlegscheibe Washer Φ65*Φ42*10
Accumulator Warning
76 1 Warning open
(Ofnnenn)
77 1 N2 Füllung Aufkleber N2 Charge Kit
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-125A-01
P-40-01 66BEILITE
BEILITE BLTB 125A Ersatzteilliste - Spare Parts List
9 6
10 5
32 4
8 6
33 21
30
11
34
16
35 15
3
12
13
18 14
31
IV. Product identificationIV.
andProduct
positionidentification and position IV. Product identification and p
19
17
1. Beilite sign 1. Beilite sign
5. Rear cylinder warning5.
sign
Rear cylinder
1.7.Beilite
Beilite
warning
sign
sign sign 7. Beilite sign
5. Rea
It includes the relevant parameters
It includes the rel
39 Warning of Warning
the product which must of
be the product wh
DISCHARGE
confirmed when you purchase
DISCHARGE
confirmed
the whenDISy
8
RIOR TO 7 RIOR TO product. product. RIO
DISASSEMBLY DISASSEMBLY DIS
Beilite Machinery Co., Ltd. Beilite Machine
USE ONLY NITROGEN USE ONLYWeight
NITROGEN kgWeight
2. Grease nipple 2. Grease nipple 2. Length
Grease nipple mmLength
28 Required oil 10Flow L/min
Required oil Flo
6. Accumulator warning sign 6. Accumulator warning
Working sign
pressure kg/cm
Working
2 6. Acc
pressur
2 20 9
Warning Impact
WarningRate b.p.m
Impact Rate
Every 2 hours Every 2 hours Every 2 hours
Hose Diameter InHose Diameter
DISCHARGE DISCHARGE DIS
17 PRIOR TO 23 PRIOR TO Chisel Diameter mmChisel Diameter
PRI
DISASSEMBLY DISASSEMBLY Chisel Length mmChisel LengthDIS
It refers to the oil injectionItport.
refers
It is
to the oil injection port. It is Applicable
It refers to theExcavator mApplicable
2
oil injection port. It is Exca
recommended to add grease recommended
every to add USE
grease every
ONLY NITROGEN USErecommended
ONLY NITROGEN to add greaseTon
every
24
two hours and grease can be twoadded
hours and grease can be added two hours and grease can be added
IV. Product identification andtime
at any IV.
position
Product
when itidentification and
is foundatthat
any the
time when27
position IV.the
it is found that Product identification andtime
at any position
when it is found that the
chisel is dry. chisel is dry. chisel is dry.
1. Beilite sign 1. Beilite
5. sign
Rear cylinder warning sign
27 5. Rear7.cylinder
Beilite sign
warning
1. Beilite
signsign 7. Beilite sign 5. Rear cylinder warning sign 7. Beilite
25 It includes the relevant parameters
It includes the relevant parameters It includes
3. Valve adjuster Warning 3. Valve adjuster
8. Operation
Warning precautions8. Operation 3. Valve adjuster
precautions Warning 8. Ope
of the product which must be of the product which must be of the prod
DISCHARGE
confirmed when you purchase the
DISCHARGE
confirmed when you purchase the
DISCHARGE
confirmed
RIOR TO TO The operator should pay
RIORproduct. The
attention
product. operator
to the
should
following
RIOR TOpay attention
items when
to the
using
following
Thei
product.
DISASSEMBLY DISASSEMBLY
the hydraulic breaker the hydraulic breaker
DISASSEMBLY
Valve Adjuster Valve Adjuster
Beilite Machinery Valve Adjuster
Check before Co.,
startLtd.
up: Beilite Machinery
Check • Co.,
before start
WhenLtd.
up:disassembling • WhenBeilite
the M
disassem
Chec
26
2. Grease nipple 2. Grease nipple
USE ONLY NITROGEN
• Check
Length 2. Grease
Weight
USE
whether
engine is equipped
kg
ONLY NITROGEN
the main
nipple
mm Length
Weight
Version 2019
• Check whether
with engine is equipped in/out
kg
mm
USE ONLY NITROGEN
hydraulic
the main
adapter
breaker, protect the
with port and prevent
Weight
hydraulic •brea
Length
in/out adapter
C
e
Required oil Flow L/min Required oil Flow L/min Required
6. Accumulator warning sign 6. Accumulator Working sufficient
warning hydraulic
pressuresign kg/cmoil 2 andsufficient
Working pressure hydraulic
6.external
kg/cmimpurities
Accumulator oil
2 and warning from
sign external impur
Workingsu
(Note: Be sure to adjust the(Note: pressure Be sure to whether
adjust the thepressure
hydraulic oil iswhether (Note: Be surehydraulic
thepolluting
hydraulic to adjust the pressure
Warning ImpactWarning
Rate b.p.m Impact Rate b.p.m oil is oil.
Warning polluting hydr
Impact wR
Every 2 hours whenEvery
the hydraulic
2 hours breakerwhen stops)the hydraulic
Hose breaker
clean.
Diameter stops)
EveryIn2 please
Otherwise, hours
Hoseadd or when
clean.
Diameter • Carry
Otherwise,theInhydraulic
out
please breaker
maintenance
add or •stops)
andCarry out Hosemaic
Dia
IV. Product identification and position
IV. Product identification and position IV. Product identification and position
To regulating
DISCHARGE
PRIOR TO
the return pressure,
To regulating
DISCHARGE
theDiameter
PRIOR Chisel
TO
return pressure,
replace hydraulic mmoil Chisel
timely. replaceTo
Diameter regulating
hydraulic
DISCHARGE
replace
mmoil
PRIOR TOthethe return pressure,
timely.
hydraulic oil andreplaceChisel
the hyre
D
you canDISASSEMBLY
adjust the hitting power you can and adjust • theLength
Chisel
DISASSEMBLY hittingstarting
Before power mm and
work, Chisel
• Length
please Before you canDISASSEMBLY
starting adjust
mm the timely.
hitting powerfilter and element
Chisel
• LB
1. Beilite sign 1. Beilite
5. Rear
signcylinder warning sign 5. Rear 7. Beilite
cylinder
signwarning1.signBeilite sign7. Beilite sign 5. Rear cylinder warning sign 7.filter work,
element
Beilite sign please
frequency.
It refers to the oil injection port.ItItrefers the oilIfthe
is Ittoincludes the adjustment
injection port.
relevant It frequency.
is is It includesIf
parameters the
the adjustment
Applicable
warm
relevantExcavator
up the ismain
Itparameters
refers to themoil engine
2 Applicable
injection for
warm frequency.
port.Excavator
is• the
It up ItWhen
main
includes Ifengine
the
m2loading
the adjustment
the • is When loading
forparameters
relevant hydraulic Applicab
w
Warning
recommended to add grease every improper,
recommended toUSE the hydraulic
Warning
addONLYgrease breaker
every improper,will the hydraulic breaker
recommended Ton
will Warning
to addthatgrease improper, Ton
the hydraulic breaker will
of the product which must
NITROGENbe of the product which
USE ONLY must
10NITROGENbe
minutes to ensure 10every
the of
minutesbreaker,the product
to ensureUSE which
please
that the
ONLY must be
remove thebreaker, pleas1
NITROGEN
two hours and grease can be added
two stop,confirmed
hoursso it
and is when
grease you
prohibited
can bepurchase
to
added the
make
stop, confirmed
so it is when you
prohibited purchase
twoto the
make
hours and grease can be added stop, confirmed
so it is when you
prohibited purchase
to the
make
DISCHARGE
at any RIOR
timeTO when it is found thatatthe
any
DISCHARGE
product.
time whenrandomly.
it is found that the product. temperature
at any RIOR
ofwhen
DISCHARGE
timeTO
hydraulic oiltemperature
is
it is found that the
chisel.
of hydraulic oil is
product. chisel. te
DISASSEMBLY adjustment
RIOR TO
DISASSEMBLY adjustment randomly.
suitable. DISASSEMBLY suitable. adjustment randomly.points:• Main inspectio
• Main inspection su
chisel is dry. chisel is dry. chisel is dry.
Beilite Machinery Co., Ltd. Beilite Machinery • Check whether there is •oil Check whether
Co., Ltd. • Beilite
Check Machinery
there is oilCo.,
whether stop• valve
the Ltd. • C
Check whethe
USE ONLY NITROGEN 4. Nitrogen
Weight
USE ONLY gas charging
NITROGEN kg 4.
pressure
Nitrogen
Weight gas charging
leakage kg pressure
at the in/out adapters
USE ONLY NITROGEN
leakage4.atNitrogenWeight gas charging
the
is fully
in/out open; precautions pressure
adapters kg
is fully open;le
2. Grease nipple 2.3.Grease
Valvenipple
adjuster 3. Valve 8.adjuster
Operation
Length
precautions
2. Grease
mm nipple
8. Operation
Length
precautions3. Valve
mm
adjuster 8. Operation
Length mm
36 37
Required oil Flow L/min Required oil Flow and whether L/min the bolts are and whether • Check the bolts
Required
38 are the oil pipe
whether
oil Flow L/min • Check whethe a
6. Accumulator warning sign 6. Accumulator The operator
Working warning shouldsignpay attention
2 The operator
to the following
should Otherwise,
loose. pay
items
6. attention
2when using
Accumulator towarning
the following
tighten the
loose. itemsshakes
sign Otherwise, The
when operator
using
tighten
abnormally;should
the pay attention
2 shakes to abnorm
the follo
lo
N2 GASpressure
CHARGE kg/cm Working
N2 GASpressure
CHARGE kg/cm Working
N2 GAS pressure
CHARGE kg/cm
the hydraulic breaker the hydraulic breaker the hydraulic breaker
Valve
Every Adjuster
Warning Impact
Valve Rate
Warning
Adjuster b.p.m Impact Rate joints orb.p.m bolts
Valve to the specified
Warning
Adjuster joints or• bolts Check
Impactto thewhether
Rate specified b.p.m • Check whethe
the hydraulic jo
Every 2 hours 2 hours Check
Hose before start up: In EveryHose
Diameter Check
2 hours • before
When
Diameter start
disassembling
up: In the • When disassembling Check
Hose theDiameter
before start up: In • When
DISCHARGE DISCHARGE
• TOCheck whether the main • Check torque.
hydraulic
whether the
breaker,
mainDISCHARGE
protect the hydraulic torque.breaker,oil is
•protect sufficient
Check thewhetherand clean; oil is sufficien
the main hydrau to
PRIOR TO Chisel
PRIOR Diameter mm Chisel Diameter mm PRIOR TO Chisel Diameter mm
DISASSEMBLY engine
Chisel
DISASSEMBLY Lengthis equipped with mm Chiselengine
Length•is equipped
in/out Add
adapter grease
with
port
mm to the
and
DISASSEMBLY prevent • Add
hydraulic
in/out adapter •portCheck
grease to engine
and
Chiselthe whether
hydraulic
prevent
Length is equipped mm• Check whethe
the system
with • A
in/out
Jede 2 stunden Jede
Ventil 2 stunden
Einstellung Ventil N2 Fülling
Einstellung
sufficient hydraulic Jede
oil
2 and2 stunden N2 Fülling
sufficient
externalbreaker
hydraulic Ventil
timely. Einstellung breaker timely.
pressureN2 Fülling
is normal; 2 and pressure extern
is norb
It impurities
oil
2 and from external impurities fromsufficient hydraulic m oil
It refers to the oil injection port. It Itis(Note:
refers to Applicable Excavator m the Applicable Excavator m Applicable Excavator
Bethesure
oil injection
to adjustport. It is(Note:
It indicates tothe charging Itpressure
refers to indicates
pressure
It oil injection
oil is to of the port. is(Note:
• charging pressure
the pressure Be sure adjust
the the Beis sureof to adjust the pressure It• indicates the charging pressure of whethe
recommended to add grease every recommended to add
USE
when the hydraulic ONLY grease every
NITROGEN
breaker stops)when the
whether
USE ONLY breaker
hydraulic NITROGEN
hydraulic Ton
recommended
stops)
whether
add polluting
grease the
everyhydraulic
hydraulic
Attention:
when
Ton oil
theadd
oil.
USE ONLY breaker
hydraulic
• Attention:
polluting
NITROGEN
hydraulic
stops)
oil.whether
Check whetherthe hydraulic
the oil
Ton • is Check
oil • A
polluti
two hours and grease can be addedtwo hours and grease can be added the rear cylinder
clean. and
Otherwise, accumulator.
pleasethe rear
add or cylinder
two hours and grease can be •
clean. Carry and
Otherwise,
• added out
Do not accumulator.
maintenance
please or
and
use this hydraulic • Carry out
• pressure, the rear
maintenance
Do not use temperature cylinder
clean.
and
this hydraulic and
Otherwise, accumulator.
please
is normal; add or •
temperatureCarry
• is D
To regulating the return pressure, To regulatingreplace
the return pressure, theTohydraulic
at any time when it is found that the at any time when it is found that the Gas should be hydraulic
charged at anyin time
oil strict
Gaswhen
timely. should bereplace
itreplace
is found charged
hydraulic
that the
breaker inregulating
oil timely.oilthe
strict
for underwater
andreturnreplace
breaker Gas forshould
the hydraulic
and•timely.
Check
oil be hydraulic
replace
and charged in
oil strict
timely.
• Check whethe
replace
chisel is dry.
you can adjust the hitting poweryou
chisel is dry.
andcan adjust
• Before
accordance
the hitting
withstarting
the
power
work,and
chisel
indicatedisplease • Before
dry. scope
accordance filter
withstarting
element
the
you timely.
work, can
indicated
adjust
please scope
the hitting
filterpower
element •underwater
accordance Beforewhether
with starting
the
the filter
work,
indicatedpleasescope filter be
frequency. If the adjustment is frequency. Ifwarm the adjustment
up the main is engine for warm • When
up the operations.
main frequency.
loading engine (If Ifunderwater
the hydraulic
for • Whenoperations.
the adjustment is
loading the element
(If warm
underwater
hydraulic is
upclean;
the main engine for element • is
Whenclea
o
3. Valve adjuster 3.improper,
Valve the hydraulic
adjuster
8. Operation precautions
of
breakerimproper,
will pressure.
the10hydraulic
8. Operation minutes
precautions breaker
to 3. Valve
ensure
of
will pressure.
adjuster
that the 10 minutes breaker, improper,
operations
to ensure
please thatare
remove theneeded,
the
8. Operation hydraulic
the breaker
please
breaker,
precautions
of remove
will
operations
please
pressure.
are 10 needed,
minutesplease
the to ensure that the breake o
stop, so it is prohibited to make stop, so it is temperature
prohibited toofmake stop, so itoil is prohibited to make
hydraulic oil is temperature chisel. consult the Beilite Company
of hydraulic is chisel.consult
or the Beilite Company or
temperature of hydraulic oil is chisel.c
adjustment randomly.
The operator adjustment
should pay attention The therandomly.
tooperator
following
should
suitable. items
paywhenattention • Mainitems
usingto thesuitable.
following adjustment
when
inspection Theusing randomly.
operator
points: •
should
Mainpay attention
inspection to the
points: following
suitable. items when using • Main
the designated agent.) the designated agent.) thi
the hydraulic •breakerCheck whetherthe hydraulic
there •breaker
is oilAdjuster • Check
Check whether whether
there istheoilstop valve • Checkthewhetherhydraulicthe•breaker
stopCheck
valvewhether there is oil • Check
Valve Adjuster Valve
4. Nitrogen Adjuster
Check beforegas charging
start up: pressure 4. Nitrogen
• When
Check gas charging
before
leakage the pressure
disassembling
startatup:
Valve
theadapters
in/out • When disassembling
leakage is at
fully
theopen; 4. the
in/out Nitrogen
Check
adapters before Beilite
gas charging
start up: Machinery
pressure
is fully open; • Co.,
When Ltd.
Beilite
disassembling
leakage
Machinery
at the in/outtheadapters Co., Ltd.is fully
• Check whether the main • Checkhydraulic
andwhether breaker,
whether the the
mainprotect
bolts are the hydraulic breaker,
and• whether
Check the protect
whether
bolts • the
the
Check
are oil pipewhether the mainwhether the oil
• Check hydraulic
and breaker,
pipewhether theprotect the
bolts are • Check
7
engine is equipped with engine
in/outis equipped
adapter port
withandtighten
preventthe in/out adapter port andtighten
prevent
engine is equipped withabnormally; in/out adapter port andtighten
preventthe
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-125A-01
(Note: Be sure to adjust the pressure
P-40-01
N2sufficient
GAS CHARGE
(Note: Bewhether
hydraulic oil and
sure to adjust the pressure
the hydraulic oil is
GAS loose.
N2sufficient
whether
CHARGE
external
joints
polluting
Otherwise,
hydraulic
impurities
or bolts
the hydraulic
hydraulic
oilfrom
to
and
the
(Note: specified
loose.
joints
oil.is Be sure topolluting
oil
shakes
Otherwise,
Check
or bolts
adjust thehydraulic
abnormally;
external impurities from N2sufficient
• whether
to
pressure oil. the
GASthe CHARGE
specified
the hydraulic
shakes
hydraulic oil and
• Check
whether the hydraulic oil is
whether the
loose.
hydraulic
joints
Otherwise,
external impurities from
or bolts
polluting hydraulic oil.
6
to the specified
shakes
• Check
when the hydraulic breaker stops) when the clean. hydraulic breaker stops)
Otherwise, please add or •clean. torque.
CarryOtherwise,
out maintenance when
please add the hydraulic torque.
breakeroil is sufficient
stops) and clean; oil is sufficient
andor • Carry out maintenance and clean. Otherwise, please add or • Carry out maintenance and and clean;
torque. oil is s
To regulating the return pressure, To regulating replacethe hydraulic
return pressure,
oil timely. • replace
Add
replace grease
hydraulic to To
the hydraulic
oil the hydraulic
regulating
timely.
oil and the • replace
Add• grease
return Check
pressure,
the towhether
hydraulic the oil
hydraulic
the
and system
replace • Check
hydraulic whether the•system
oil timely. Add grease
replace to the oil
the hydraulic hydraulic
and • Check
you can adjust the hitting power and you can adjust the hitting power and
• Before starting work, please • Before breaker
filterstarting timely.
elementwork, you
timely. can
please adjust the hitting
breaker power
pressure
timely. and is normal;
filter element timely. • Before starting work, please pressure is normal; breaker timely.
filter element timely. pressuBEILITE
BEILITE BLTB 125A Ersatzteilliste - Spare Parts List
Abmessungen
No. ET No.-Part No St-Qty Beschreibung - DE Description - GB
Dimension
1 BLTB-125A-900 Rahmenmontage Frame Ass'y
2 BLTB-125A-901 1 Rahmen (Kasten Typ) Frame(Box Type) 495×630×1626
3 BLTB-125A-902 1 Abdeckung Cover 652×50×10
4 BLTB-125A-903 12 M/C Sechskantschraube M/C Hex Bolt M30×110
5 BLTB-125A-904 12 M/C Sechskantmutter M/C Hex Nut M30
6 BLTB-125A-905 24 M/C Spanscheibe M/C Spring Washer Ø30
7 BLTB-125A-907 1 Stift Pin Ø40×290
8 BLTB-125A-909 2 Stift Abdeckung Pin Cover Ø176×24
9 BLTB-125A-910 12 Sechskantschraube Hex Bolt M12×30
10 BLTB-125A-911 12 Unterlegscheibe Washer Ø12
11 BLTB -125A-914 1 Abdeckplatte-A Cover Plate-A 242×202×7
12 BLTB-125A-915 1 Abdeckplatte-B Cover Plate-B 460×220×7
13 BLTB-125A-916 10 Sechskantschraube Hex Bolt M10×30
14 BLTB-125A-917 10 Unterlegscheibe Washer Ø10
15 BLTB-125A-919 2 Ein/Aus Propfen In/Out Plug G1"
16 BLTB-125A-920 1 Ein/Aus Propfen Deckel In/Out Plug Cover Ø30
17 BLTB-125A-924 6 Gummi Platten Rubber Plug Ø40*T22
18 BLTB-125A-925 1 Gummi Platten Rubber Plug Ø40*T20
19 BLTB-125A-926 4 Gummi Platten Rubber Plug 88*46*T23
20 BLTB-125A-927 2 Gummi Platten Rubber Plug 170*50*T22
21 BLTB-125A-928 1 Gummi Platten Rubber Plug Ø60*T22
22 BLTB-125A-940 Pufferblech Aufbau Buffer Plate Ass'
23 BLTB-125A-941 1 Hinterherpuffer Back Buffer 213×250×130
24 BLTB-125A-942 1 Mitteldämpfer Lower Damper 258×222×20
25 BLTB-125A-944 2 Seitendämpfer Side Damper 310×145×20
26 BLTB-125A-945 2 Obererdämpfer Up&Down Damper 370×210×20
27 BLTB-125A-946 2 Seitendämpfer Side Damper 200×160×20
28 BLTB-125A-947 2 Seitendämpfe Side Damper 200×90×20
29 BLTB-125A-950 Autolub System Autolub System
30 BLTB-125A-951 1 Autolub Systemoil Autolub System SMALL SIZE
31 BLTB-125A-952 1 Öl Propfen Oil Hose Plug G1/4"×520
32 BLTB-125A-953 4 Sechskantschraube Hex Bolt M10×120
33 BLTB-125A-954 4 Unterlegscheibe Washer Ø10
34 BLTB-125A-956 1 Autolub Werkzeugdeckel Autolub Tool Cover SMALL SIZE
35 BLTB-125A-957 4 Autolub Gewindemutter Autolub Tool Nut Ø18×φ12×35
36 1 Jede 2 Stunden Aufkleber Every 2 Hours Sticker
37 1 Ventil Einstellung Aufkleber Valve Adjuster Sticker
N2 Gas Charge
38 1 N2 Füllung Aufkleber
Sticker
39 1 Beilite Anschweissplatte Beilite Welding Plate
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-125A-01
P-40-01 1
8
7BEILITE
BEILITE BLTB 125A Ersatzteilliste - Spare Parts List
ABMESSUNGEN
DIMENSIONS
in mm
125A
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-125A-01
P-40-01 9
833
34 3 80 420 4.3
BEILITE
BEILITE
4 BLTB
80125A Ersatzteilliste - Spare Parts List
420 4.3
29
5 125 46
420 36 4.4
30
6
MEISSEL 125
24 420 4.4
TOOLS
7 25 - 39
420 40 45 3.7
27 No.
Breite ET No. Länge Gewicht 40 Beschreibung
26 45
47 8
Width
125 40
Part No
BLTB-125A-507-P
Length
1100
Weight
94,50 420
Description
Spitz - Moil-Point 3.8
48 125 BLTB-125A-507-FX 1100 95,00 Flach - Chisel-Point
37
49 125 BLTB-125A-507-E 1100 96,00 Stumpf - Blunt-Point
48
3 38
8
7
12
1 2 3
15 16
B 2
11
10 9
13 14
4
5
-P -FX -E -CX
6
A 49
41 50
42 51
43 44
Version 2019 s/n BLTB45-
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-125A-01
P-40-01 10
9BEILITE
BEILITE BLTB 125A Ersatzteilliste - Spare Parts List
DICHTSATZ BLTB-125A-SKX
SEAL KIT
Abmessungen
No. ET No.-Part No St-Qty Beschreibung - DE Description - GB
Dimension
- BLTB-125A-SKX
4 BLTB-125A-SKX-103 1 Pufferring Buffer Ring HBY 125*140.5*6
5 BLTB-125A-SKX-104 1 Dichtung U-Packing IDI 125*140*10
6 BLTB-125A-SKX-105 1 Staubdichtung Dust Seal DSI 125*138*7*9.5
8 BLTB-125A-SKX-107 3 O-Ring O-Ring 1BP-22A
11 BLTB-125A-SKX-110 2 O-Ring O-Ring 1BP-29
13 BLTB-125A-SKX-112 1 O-Ring O-Ring 1BP-18
16 BLTB-125A-SKX-120 1 Weißer Propfen White Plug T/P Φ15*Φ11*14
17 BLTB-125A-SKX-122 1 O-Ring O-Ring 1BP-11
21 BLTB-125A-SKX-153 1 O-Ring O-Ring 1BP-9
22 BLTB-125A-SKX-154 1 Weißerring White Ring T3P-9
27 BLTB-125A-SKX-204 1 O-Ring O-Ring 1BG-60
28 BLTB-125A-SKX-205 1 O-Ring O-Ring 1BG-45
31 BLTB-125A-SKX-302 2 Gasdichtung Gas Seal IKH-123.5
32 BLTB-125A-SKX-303 2 Abdichtung Step Seal SPNS-123.5
33 BLTB-125A-SKX-304 1 O-Ring O-Ring 1BG-150
36 BLTB-125A-SKX-402 1 O-Ring O-Ring 1BG-150
38 BLTB-125A-SKX-404 1 O-Ring O-Ring 1BP-18
40 BLTB-125A-SKX-406 1 O-Ring O-Ring 1BP-12
54 BLTB-125A-SKX-517 1 O-Ring O-Ring 1BP-11
55 BLTB-125A-SKX-519 1 O-Ring O-Ring 1BP-16
56 BLTB-125A-SKX-520 1 O-Ring O-Ring 1BP-16
63 BLTB-125A-SKX-606 1 O-Ring O-Ring 1BP-5
65 BLTB-125A-SKX-608 1 O-Ring O-Ring 1BP-14
67 BLTB-125A-SKX-610 1 O-Ring O-Ring 1BP-12
70 BLTB-125A-SKX-613 1 O-Ring O-Ring 1BP-95
71 BLTB-125A-SKX-614 1 Weißer Ring Whitering 4BP-95
Abmessungen
No. ET No.-Part No St-Qty Beschreibung - DE Description - GB
Dimension
Reperaturset Repair Kit
60 BLTB-125A-109 1 Membran Diaphragm Φ150*40
61 BLTB-125A-SKX-110 1 Inneresventil Inner Valve Assembly Φ59*14
62 BLTB-125A-111 1 Gaseinstelvorrichtung Gas Charging Adjuster M12*P1.25
63 BLTB-125A-SKX-112 1 O-Ring O-Ring 1BP-5
64 BLTB-125A-113 1 Gasauffülkappe Gas Charging Cap M12*P1.25
65 BLTB-125A-114 1 O-Ring O-Ring 1BP-14
66 BLTB-125A-SKX-120 1 Gasspeicherpropfen Acc'cover Plug M10*P1.0
67 BLTB-125A-SKX-122 1 O-Ring O-Ring 1BP-12
70 BLTB-125A-152 1 O-Ring O-Ring 1BP-95
71 BLTB-125A-SKX-153 1 Weißer Ring White Ring 4BP-95
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-125A-01
P-40-01 11
10BEILITE BLTB Ersatzteilliste - Spare Parts List
AKKUMULATOR REPERATURSET
ACCUMULATOR REPAIR KIT
"Druckspeicher sind Druckbehälter im Kontext der Europäischen Druckgeräterichtlinie 97/23 EC. Wenn Sie Ihren Druckspeicher reparieren wollen, müssen Sie alle Sicherheitsan-
weisungen befolgen und sich an die Gesetze und an alle nationalen/regionalen Verordnungen Ihres Landes halten."
Abmessungen
No. ET No.-Part No St-Qty Beschreibung - DE Description - GB
Dimension
Reperaturset Repair Kit
60 BLTB-125A-109 1 Membran Diaphragm Φ150*40
61 BLTB-125A-SKX-110 1 Inneresventil Inner Valve Assembly Φ59*14
62 BLTB-125A-111 1 Gaseinstelvorrichtung Gas Charging Adjuster M12*P1.25
63 BLTB-125A-SKX-112 1 O-Ring O-Ring 1BP-5
64 BLTB-125A-113 1 Gasauffülkappe Gas Charging Cap M12*P1.25
65 BLTB-125A-114 1 O-Ring O-Ring 1BP-14
66 BLTB-125A-SKX-120 1 Gasspeicherpropfen Acc'cover Plug M10*P1.0
67 BLTB-125A-SKX-122 1 O-Ring O-Ring 1BP-12
70 BLTB-125A-152 1 O-Ring O-Ring 1BP-95
71 BLTB-125A-SKX-153 1 Weißer Ring White Ring 4BP-95
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-125A-01
P-40-01 1
12
1BEILITE BLTB 125A
53
75 Ersatzteilliste
Ersatzteilliste -- Spare
Spare Parts List
WERKZEUGKISTE
TOOLKIT
Abmessungen
No. ET No.-Part No St-Qty Beschreibung - DE Description - GB
Dimension
1 1 Maulschlüssel Open Spanner 19-22
2 1 Maulschlüssel Open Spanner 24-27
3 1 Maulschlüssel Open Spanner 36-41
4 1 Maulschlüssel Open Spanner 41-46
5 1 Sechskantschlüssel Hex Key Wrench 65
6 1 Sechskantschlüssel Hex Key Wrench 5
7 1 Sechskantschlüssel Hex Key Wrench 6
8 1 Sechskantschlüssel Hex Key Wrench 8
9 1 Sechskantschlüssel Hex Key Wrench 10
10 1 Sechskantschlüssel Hex Key Wrench Abmessungen
12
No. St-Qty Beschreibung - De Description - Gb
11 1 Sechskantschlüssel Hex Key Wrench Dimension
17
12 1 N2 Füllgerät N2 Charging Kit 8MPa
13 1 Sperrstift Knockout Pin φ15.5*297
14 1 Maschinen Augenschraube Machine Eye Bolt M10
15 1 Maschinen Augenschraube Machine Eye Bolt M12
16 1 Maschinen Augenschraube Machine Eye Bolt M20
17 1 Ratschenschlüssel Socket Wrench 14
18 BLTB-125A-513 3 Schmiernippel Grease Nipple G1/4
19 BLTB-125A-508 5 Gummi Platten Rubber Plug φ20
N2 FÜLL SATZ
N2 FILLING GEAR
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-125A-01 12BEILITE
BEILITE BLTB 125A Ersatzteilliste - Spare Parts List
OPTIONEN
OPTIONAL EQUIPMENT
ET No.Part No St-Qty Beschreibung - DE Description - GB
Fettpresse 500gr Greasegun 500gr
1
2 Hand 2 Hand
Meissel pasta kartouch Grease Cartridge
1
500gr 500gr
FETTPRESSE
GREASE GUN
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-125A-01
P-40-01
1
14
3BEILITE BLTB Ersatzteilliste - Spare Parts List
www.beilite.com
www.beilite-europe.com
®
Any unauthorized use or copying of the contents or any part thereof is prohibited.
This applies in particular to trademarks, model denominations, part numbers and
drawings.
© 2020 Taizhou Beilite Machinery Co. ltd. - No. 2020 P-125A-01
P-40-01 1
15You can also read
