Contractor 2021 PRODUCT NAVIGATION - WAGNER
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Contractor 2021
WAGNER PRESENTS
P R O D U C T N A V I G AT I O N
SHORT AND SIMPLY EXPLAINED PUMP OVERVIEW ACCORDING TO MATERIALS
1. MATERIALS
When displaying suitable materials, we shorten these for better clarity using colour codes. Finish Control 3500
Finish Control 5000
Water and solvent-based lacquers, Synthetic resin varnishes, PVC lacquers, Primers, fillers
lacquer paints, oils, separating agents 2K lacquers
FineCoat 9900 Plus
SuperFinish 23 Pro
Fire protection, rust protection paints Emulsion and latex paints, adhesives, Exterior paints, roof coatings, floor HEA
sealants coatings, textured paint
SuperFinish 23 Plus
HEA / Airless Enamel
/ TempSpray / Aircoat
Structural waterproofing, bituminous Filler Plaster
Enamel
coatings
SuperFinish 23 CR
SuperFinish 33 Pro
SuperFinish 33 Plus
PowerPainter 90
2. RECOMMENDED INTENSITY Extra
ProSpray 3.20 HEA
We recommend that you select a device suited to your typical application.
ProSpray 20 HEA
Residential Large residential Commercial ProSpray 3.21 HEA
ProSpray 3.25
ProSpray 3.31
ProSpray 3.34
3. TECHNOLOGY ProSpray 3.39
Emulsion
Spraying method Technologies Drive Other ProSpray 3.39 Filler
HeavyCoat 750 E/G
& E SSP
XVLP / HVLP Piston pump Electric Explosion-protection HeavyCoat 950 E/G
& E SSP
HeavyCoat 970 E/G
FineSpray Diaphragm pump Pneumatic TempSpray & E SSP
PlastCoat HP 30
AirCoat Double diaphragm pump Petrol-driven
PlastCoat 1030 E
PlastMax
Airless Turbine
Plaster spraying Spiral pumps
THE WAGNER ACADEMY SPRAYGUIDES
FURTHER TRAINING FOR CON- NEW TRAINING CENTRE
TRACTOR WORK AND INDUSTRY IN MARKDORF, BY LAKE
Companies that want to continue being successful in their markets in CONSTANCE
the future must continuously expand their employees‘ knowledge and
abilities. Equipment technology represents the future of professional • Three seminar rooms with state-of-the-art presentation and
painting and decorating within the context of normal, efficient, conference technology
high-quality site work. This is why it is particularly important to us to • Practical zone with different, mobile demo areas
not only provide you with the technology but also to convey the corre-
• Technical centre for service issues
sponding know-how. After all, even the very best products only create
the best surface when used in combination with specialist professional • Painting booth with extraction system
knowledge. • Lounge area with cafeteria - Our trainers will be happy to
invite you for a coffee!
MACHINE & MATERIAL
The WAGNER ACADEMY‘s completely new seminar programme has
now been divided into four areas of application - Paint, Interior paint / The team of the WAGNER ACADEMY welcomes you and
adhesives, Exterior / building protection and Fillers / plaster. There are your colleagues!
three levels: Basic, Advanced and Expert.
WE COME TO YOU!
PERFECTLY MATCHED More SprayGuides:
Whether user, plant manager, material manufacturer or sales partner
All training courses can also be held conveniently at your premises. The extensive WAGNER SprayGuide offers you test reports from well-known sprayguide.wagner-group.com
- the new WAGNER ACADEMY offers every target group high-quality
Please contact us at Academy.DF@wagner-group.com or call
material manufacturers for use with WAGNER spray machines.
training modules for professional and personal further education
We advise checking the seminar calendar on page 29 directly and +49 (0) 7544 505 1602 Visit sprayguide.wagner-group.com to find out how to set up your machine to
Search by material type
securing your personal training date. match the material you are using, and which paints and lacquers can be sprayed
most effectively with WAGNER technology.
Search by material manufacturer
You can find more training dates online at
Registration and further information can also be found on our website. Search by WAGNER machine and systems
INNOVATION
Perfect surfaces and added value are our passion. Bringing colour, protection
and function to surfaces is our mission. We dedicate all of our technical
expertise to your objects and products, and support you with personal service.
Using innovative technologies and highly efficient, reliable and user-friendly
solutions, we are constantly setting new standards in surface technology.
SINCE 1947
Anyone purchasing a WAGNER paint spraying
unit automatically receives a three-year
manufacturer‘s warranty. But we can do
more: If you register online, you can extend
this warranty for a further two years, free of
charge!
wagner-group.com/3plus2
HVLP / XVLP
FINISHCONTROL 3500 / 5000 SPRAYPACK
High air volume – low air pressure
An all-rounder for small projects – the entry-level answer for professional
coating using spray technology
Are you looking for a versatile spray device that offers a wide range of applications for impro- • Universally suitable: for use with varnishes, lacquers • Flexible: Ideal for renovation and repair work
vement and renovation work on small to medium-sized construction sites? Then the modular and emulsion paints, thanks to a modular spraying • Available in two versions: compact, hand-held unit
low-pressure spray systems with HVLP- and XVLP technology (Xtra Volume Low Pressure) from attachment system for simple material changes with practical carry case or powerful with air hose and the
WAGNER are perfect for you – especially in terms of quality, functionality and value for money.
• Total control: directly on the gun turbine on the ground
Low-pressure spraying involves working with a large air volume and a low air pressure (up to
0.7 bar) – which results in a high working speed and minimal overspray. TECHNOLOGY BY WAGNER • Extremely compact and practical
Particularly powerful and flexible: Well-equipped for daily use on construction sites: Click & Paint System: The paint-car-
The trend-setting Visco nozzle
In low-pressure spraying, the atomising air generated in the turbine flows through The modular system consisting of a turbine and various spray attachments enables rying spray attachment can be easily
technology: produces a particularly
an air hose to the paint container on the spray gun, where it then builds up pres- the application of wood stains, varnishes and lacquers through to emulsions with removed from the gun for easy cleaning.
high-quality spray pattern. This is achie-
sure. This delivers the coating material through the material tube to the nozzle and professional quality. Thanks to the practical Click & Paint function, the attachments Additional spray attachments allow you
ved thanks to the flat jet delivered by
atomises it with the remaining air. The spray devices of the WAGNER XVLP series can be changed with a simple movement. The XVLP devices from WAGNER are to work with different materials and
the slot nozzle which also ensures a high
offer much better atomisation performance compared to other lower-pressure perfect when starting to use spray equipment or to add to the range of devices change colours rapidly
working speed
devices (HVLP), thanks to a 60 percent greater air volume and 30 percent more available on site.
surface coverage.
High-performance turbine with a
light weight: Start the trubine easily on
1. LESS OVERSPRAY: 3. INNOVATIVE NOZZLE TECHNOLOGY: the gun by pressing the trigger into the
The HVLP- and XVLP spray devices combine the positive properties of low pressure The XVLP spray devices combine the properties of low pressure with those of a first level. Depress the trigger completely
with those of a high-pressure procedure, i.e.: Less overspray and fine atomisation high-pressure procedure. The combination of a large air volume and innovative , to start the material flow
result in an optimised consumption of material. Visco slot nozzle technology enables a high working speed with excellent surface
quality even with highly viscous paint.
2. OPTIMAL ADJUSTMENT OPTIONS:
The volume of air and material can be perfectly adjusted directly on the gun and 4. A VARIETY OF POSSIBLE USES:
therefore quickly to various objects using a rotary control. The devices are especially versatile thanks to three spray attachments – Standard-
Spray, FineSpray and WallSpray – which are ideal for handling various materials. Direct Spray Control: FinishControl FINISHCONTROL 5000
Thanks to the practical Click & Paint function, the spray attachments can be is particularly easy to use. (1) The
changed with a simple movement. continuously adjustable air volume and
the (2) material volume control ensure
a precisely tailored approach to the
material. (3) The spraying level and spray
APPLICATION AREA ADVANTAGES pattern width can be adjusted to suit the
item being coated
HVLP AND XVLP TECHNOLOGY FINISHCONTROL 3500
Lacquers Enamels Emulsions • Easy to use
• Innovative nozzle technology FINISHCONTROL 5000 SPRAYPACK - DPXVLP 2316090
standard high-viscosity • Spray pattern adjustable to object FinishControl 5000, basic unit -
• Direct Spray Control: Settings are directly on the device
FINISHCONTROL 3500 SPRAYPACK - DPXVLP 2341501 Air hose including handle, for FinishControl 5000 2314573
HVLP • Spraying of undiluted materials
Turbine housing with handle - StandardSpray spray attachment 2321879
• Quick material change through Click & Paint system (XVLP)
StandardSpray spray attachment 2321879
XVLP
Carrying case, for FC 3500 2341100 ACCESSORIES
Air filters, 3 pieces, for FinishControl 3500 2343947 FineSpray spray attachment 2321877
Filling hopper, 3 pieces, for FinishControl spray attachments 2324745 StandardSpray spray attachment 2321879
Carrying strap, for FC 3500 2341187 WallSpray spray attachment 2321880
Strap holder FinishControl 3500, incl. screws 2343948 Frontend transportation case (Tanos Systainer) 2340218
Cleaning brush 514209 Can Adapter 2350692
NOTES
FINECOAT 9900 PLUS SPRAYPACK
High-performance HVLP paint specialist in an easy-to-use design
• Compact and easy to use • Not suitable for: use in potentially explosive
• Permits precise adaptation to the object to be atmospheres
painted and provides an unmistakably fine spray
pattern: even with water-based materials
• Wide range of applications: both indoors and outdoors
Precise adjustment of the spray Practical holder: for the gun. During
pattern: directly on the gun. This way breaks in work and when transporting,
the pattern can be set precisely to the the gun can be safely stored on the unit
particular object to be coated
In a single operation: the air flow Quick cleaning of the filter: Take out
rate and the material flow rate can be the filter without tools, just briefly knock
regulated directly on the gun out or blow out and refit. Dirty filter
warning light indicates if the filter has to
be cleaned
Ergonomic gun build: The gun fits
comfortably in the hand and is effort
saving. In addition, the gun is very energy Dual air filtration: one on the cooling
efficient side and another one on the atomizing
side with an automotive type air filter
with pre filter
Quick-release coupling with integral
swivel joint: for quick connection of the
gun to the air hose
Ultra-powerful: thanks to the 5-stage
turbine
ACCESSORIES
FineCoat gun, 1-litre pressure cup, incl. nozzle set No. 4 279094
Gravity feed cup, for FineCoat Split Gun, 600 ml 524053
FineCoat Split Gun, suction cup, 1000 ml 524028
Nozzle set, for FineCoat, fifferent sizes 276XXX
Nozzle set, for FineCoat Split Gun 529XXX
FINECOAT 9900 PLUS SPRAYPACK - DPFC 276048 Air hose assy. FC-9900 Plus 277236
Air hose assy. FC 9900 Plus 277236 Hose pack, consisting of material and air hose DN10, 8.2 m 261255
FineCoat gun, 1 litre pressure cup, incl. nozzle set No. 4 277035B Hose whip, 152 cm, for FineCoat 524405A
DIAPHRAGM PUMP
Effective material intake – broad range of
HEA - HIGH EFFIENCY AILRESS materials
up to 55% less overspray with maximum Do you want to process different materials, from primers to silicate paints with just one
control device? Then a WAGNER diaphragm pump is the ideal choice. This powerful, maintenance-
friendly technology transports the material via a lifting motion of the diaphragm. Diaphragm
pumps from WAGNER are robust, easy-to-use construction site and workshop units.
Do you already value the advantages of airless technology, such as control and comfort? Then
you’ll be inspired by the new HEA ProTip airless nozzle from WAGNER. It achieves perfect
surface results at a much lower spray pressure. Compared to conventional airless technology,
the spray edges are softer, the result more even and free from streaks on the edges. The perfect companion for painters and affiliated trades: Fire retardants for joiners, metalworkers and similar trades :
The patented Quality-Long-Stroke (QLS) technology from WAGNER, with its opti- Pneumatic double diaphragm pumps are ideal for the wood and metal processing
mised hydraulics and special valve technology, means that the material is taken in industry. In this case, the material is transported via the lifting motion of two oppo-
much more effectively compared to diaphragm pumps from other manufacturers. sing diaphragm which generates a lower-pulsation material flow. This allows you
As a result, a broad range of different materials, such as primers and release agents, to work with materials which are particularly sensitive to shearing and moisture
More efficiency for prolonged working: Robust and durable: primers and lacquers, emulsion and silicate paints, fabric adhesives, corrosion and and with premixed two-component materials. WAGNER double diaphragm pumps
Thanks to the HEA nozzle technology, the spray pressure can be significantly The nozzle wears more slowly due to the lower spray pressure. This means that HEA flame retardants can be processed. In the domain of specially filled materials such are explosion-proof and operated by compressed air, which means that they can be
lowered. This reduces the overspray by up to 55 percent. Apart from the much lower nozzles can be used for considerably longer than conventional airless nozzles. Loads as bitumen, fire protection and fillers, piston and spiral pumps are the specialists. used safely in workshops and in painting booths.
masking effort required, this also has a positive effect on the gun’s recoil. Working on the pump are also reduced due to the lower pressure, with handling of the gun Electrically operated diaphragm pumps can be used in both Airless and AirCoat
with a WAGNER airless pump is made even easier and more convenient with the also improved. processes with additional air atomization.
HEA technology.
1. ALSO SUITABLE FOR VERY SMALL VOLUMES: 3. FINE AND EVEN SPRAY PATTERN:
1. MAXIMUM CONTROL: 3. INCREASED EQUIPMENT LIFESPAN: Diaphragm pumps have up to 58 per cent* less material in their system. The Diaphragm technology reduces the pulsation of the material flow, which avoids any
The gentle spray pattern ensures a more even surface when overlapping the paths Even the lifespan of the spray device itself is prolonged: the lower spraying pressure device‘s small cross-sections means that it can also be operated with tiny amounts irregularities in the spray pattern. It remains fine and even. The piston‘s switching
and avoids hard edges. This leads to a simple and easy-to-learn technique – even with High Efficiency Airless means that the system and its components are under of material. This saves resources both when changing material and during the point is also dispensed with in a diaphragm pump.
for inexperienced users. less strain. cleaning process.
2. PERFECT SURFACE QUALITY: 2. LOW-MAINTENANCE AND DURABLE:
High Efficiency Airless ensures a uniform and even application on all surfaces and The reduced lifting frequency of the diaphragm means that the already lower num-
therefore offers excellent surface quality – especially when compared to conventio- ber of wear parts are placed under significantly less stress. This significantly reduces
nal applications with a brush and roller. maintenance costs*. However, should a repair be necessary, the corresponding
components can be easily replaced directly on site and in the case of both valves for
example, within minutes.
100 bar pressure
HEA ProTip 517
SPRAYPATTERN AT LOW PRESSURE BENEFITS
Paint application
irregular spray pattern from the • Large range of material
piston pump • Flexible material intake
• Fully adjustable pressure regulation from 0 - 25 MPa
• QLS technology with longer stroke
150 bar pressure even spray pattern from the
Standard airless nozzle
• Low-pulsation
diaphragm pump
517 • Robust and very low-maintenance
Standard airless technology
Paint application
• Simple maintenance
• Low noise
*Compared to other airless nozzles on the market
*Compared to other piston pumps on the market
PRACTICAL ACCESSORIES SF 23 PRO RECOMMENDED USE
SUPERFINISH 23 PRO HEA SPRAYPACK AIRLESS GUNS MATERIALS:
For perfect results with maximum control thanks to innovative airless Vector Pro, 1/4”, incl. TradeTip 3 nozzle holder, with 2-finger
trigger
538041 Water and solvent-based Synthetic resin lacquers,
lacquers, lacquer paints, PVC lacquers, 2K
diaphragm technology Vector Pro, 1/4”, incl. TradeTip 3 nozzle holder, with 4-finger
538040
oils, separating agents lacquers
trigger
Primers, fillers Fire protection, rust
• Innovative HEA technology: Up to 55 % less overspray frame, is ideal for easy and space-saving transport on the Vector Grip, 1/4”, incl. TradeTip 3 nozzle holder, with 2- and
538043 protection paints
with maximum control. construction site. 4-finger trigger
• Flexible suction hose: The diaphragm pump draws ma- • SuperFinish 23 Pro is virtually maintenance-free:
terials such as emulsions, latex paints or lacquers directly works reliably and durably and can be used with even Emulsion and latex Exterior paints, roof
AIRLESS HOSE
from the original container. small amounts of material. paints, adhesives, sea- coatings, floor coatings,
• For small emulsion jobs HP hose DN3, max. 27 MPa, NPS 1/4“, 7.5 m 9984583 lants textured paint
• Easy to move: The SuperFinish 23 Pro, with its foldable
AIRCOAT ACCESSORIES OBJECT SIZE:
Superb Spray Surface Quality: with Tidy: Hoses can be practically stowed AirCoat gun AC 4500, incl. blue air cap and holder 2368269 For different project sizes
the Vector Pro Airless gun. Light in weight away thanks to the integrated rack
HP double hose, material DN3, max. 27 MPa, air DN6, 1/4“,
with a long service life 9984595
7.5 m
AirCoat regulator, fitting kit 340250
Convenience: The foldable frame allows TECHNICAL DATA
convenient building site transport and OTHERS
space saving storage Motor output 1.3 kW
Flexible Suction Hose for direct 5 litre hopper, M36x2 341265
suction from the container: Trouble Pressure gauge set assy. HEA(MPa) 2383995 Voltage 230 V / 50 Hz
free working thanks to the special fine Max. operating pressure 250 bar, 25 MPa
mesh suction intake filter Nozzles HEA ProTip, different sizes 554XXX
Max. delivery rate 2.6 l /min
Nozzles TradeTip 3, different sizes 553XXX
Weight 27 kg
Max. nozzle size 0.023“
Large variety of materials with QLS Max. viscosity 20.000 mPas
long-stroke technology: Made possi-
HEA Pressure Gauge: allows monito- ble by optimised hydraulics and special
ring of the spray device pressure. HEA valve technology
nozzles allow work in the low-pressure
range (ideally at 80 - 140 bar) that is
marked with green on the pressure gauge Robust design: with heavy duty tyres
making the SF 23 Pro the perfect partner
on every construction site
≤ 0.023“ ; 2.6 l/min
SUPERFINISH 23 PRO HEA SPRAYPACK - DPFSF 2399198
Basic unit, SF 23 Pro, cart version -
ACCESSORIES
HP hose DN6, 25 MPa, NPSM 1/4”, 15m 2390608
HEA ProTip, different sizes (e.g. tip 211 - Art.No. 517211) 554XXX
Suction hose assy. (return hose and filter included) 2393123
5 litre hopper, M36x2 341265
Airless Vector Pro gun, 1/4”, incl. TradeTip 3 nozzle holder, with
538040 Nozzle extension, 30 cm, G-thread 556075
4-finger trigger
HEA ProTip, 519 554519 Nozzle extension, 60 cm, G-thread 556077
HEA pressure gauge set assy 252475 Hydraulic oil Divinol 1 litre 21061
Tool bag, incl. wrench 41mm/22mm/19mm and screw driver 2390620 TipClean; 200ml 2400214
SUPERFINISH 23 PLUS HEA SPRAYPACK SUPERFINISH 23 PLUS AIRLESS ENAMEL
Compact – light and yet robust SPRAYPACK
The perfect solution for small paint jobs using diaphragm technology
• Innovative, low-pressure airless technology: up to • Use with 20 m hoses guaranteed with any material • Entry-level Airless spraypack • FineFinish painting: with hopper and the special
55 % less overspray • Straightforward handling and simple operation: FineFinish nozzle
• Compact: Smallest in its class, mobile and light Multifunction switch for greater safety - It is impossible to
• For medium-sized emulsion jobs turn the unit on and off under pressure
• Robust: Ideal for demanding construction site use • Improved performance: No-maintenance brushless
motor
• PumpRunner: Perfect for clean, tidy transport
Superb Spray Surface Quality: with
Superb Spray Surface Quality: with the Vector Grip Airless gun. Light in
the Vector Grip Airless gun. Light in weight with a long service life
weight with a long service life
Large variety of materials with QLS Large variety of materials with QLS
long-stroke technology: The optimised long-stroke technology: The optimised
hydraulics and special valve technology hydraulics and special valve technology Infinitely variable pressure regula-
make it possible make it possible tion: from 0 to 250 bar
Infinitely variable pressure regula-
tion: from 0 to 250 bar
Multifunction switch for extra
safety: on/off as well as circulation and
Multifunction switch for extra spray mode. This prevents accidental
safety: on/off as well as circulation and switching on or off while the system is
spray mode. This prevents accidental under pressure
switching on or off while the system is
Direct suction: straight from the con-
under pressure
tainer for trouble-free working. Inclusive
PumpRunner for clean transport included
Off Intake / Spray
Circula-
tion
Off Intake / Spray
Circula-
tion
≤ 0.023“ ; 2.6 l/min ≤ 0.023“ ; 2.6 l/min
SUPERFINISH 23 PLUS HEA SPRAYPACK - DPFSF 2384153 SUPERFINISH 23 PLUS AIRLESS ENAMEL - CART VERSION ACCESSORIES
2341492
Basic unit, SF 23 Plus, cart version - DPFSF TradeTip 3 FineFinish nozzles, different sizes (e.g. tip 210 - Art.
ACCESSORIES 554XXX
Basic unit, SF 23 Plus on cart - No. 517210)
Suction system complete, for SF 23 Plus, incl. PumpRunner 2342879
HEA ProTip, different sizes (e.g. tip 211 - Art.No. 517211) 554XXX 2SpeedTip, different sizes 271XXX
HP hose DN6, 27 MPa, NPSM 1/4“, 15 m 9984574 5 litre hopper, M36x2 341265
5 litre hopper, M36x2 341265 5 litre hopper, M36x2 341265
Pressure gauge set assy. HEA (MPa) 2383995 HP hose DN3, 27 MPa, NPS 1/4“, 7.5 m 9984583
Nozzle extension, 30 cm, G-thread 556075 Nozzle extension, 30 cm, G-thread 556075
Airless gun Vector Grip, 1/4“, incl. TradeTip 3 nozzle holder, Airless gun Vector Grip, 1/4“, incl. TradeTip 3 nozzle holder,
538043 538042
with 2- and 4-finger trigger Nozzle extension, 60 cm, G-thread 556077 with 2-finger trigger Nozzle extension, 60 cm, G-thread 556077
HEA ProTip 519 554519 Hydraulic oil Divinol 1 litre 21061 2SpeedTip, L10, 208 / 510 271042 Hydraulic oil Divinol 1 litre 21061
Gun filter white, 1 piece, 50 MA, 0.31 mm MW, medium 34377 TipClean; 200ml 2400214 Gun filter red, 1 piece, 180 MA, 0.084 mm MW, extra fine 34383 TipClean; 200ml 2400214
SUPERFINISH 23 PLUS TEMPSPRAY SUPERFINISH 23 PLUS AIRCOAT ENAMEL
SPRAYPACK SPRAYPACK
Enamel specialist with heated hose Mobile complete solution for enamel work
• Perfect surface results: thanks to heated hose • With AirCoat technology: Particularly fine atomisation • Suitable for: non EX environments
• Also ideal for: highly viscous materials such as enamels for a perfect finish
with high VOC content • Perfectly matching components: Minimal overspray
• The TempSpray system heats the material directly and high application efficiency
in the hose: thereby ensuring perfect viscosity without • Particularly easy handling
the need for thinning, as well as optimum paint appli- • The industry standard: quality-crafted by WAGNER
cation
Perfect surface quality with Temp- Ergonomic AirCoat gun AC 4600:
Superb Spray Surface Quality: with
Spray: Thanks to warming up the coating The low air consumption and the soft
the Vector Grip Airless gun. Light in
material a very soft spray pattern is spray pattern guarantee perfect painting
weight with a long service life
generated. This increases the atomisation results
quality. Further advantages are: reduced Large variety of materials with QLS
overspray, perfect viscosity withour long-stroke technology: The optimised
diluting and much more hydraulics and special valve technology
Infinitely variable pressure regula-
make it possible
tion: from 0 to 250 bar
Infinitely variable pressure regula-
tion: from 0 to 250 bar
Large variety of materials with QLS
long-stroke technology: The optimised
hydraulics and special valve technology Multifunction switch for extra
make it possible safety: on/off as well as circulation and
Multifunction switch for extra
spray mode. This prevents accidental
safety: on/off as well as circulation and
switching on or off while the system is
spray mode. This prevents accidental
under pressure
switching on or off while the system is
under pressure
With AirBoost 100 compressor
Off Intake / Spray
Circula-
Off Intake / Spray tion
Circula-
tion
≤ 0.023“ ; 2.6 l/min
SUPERFINISH 23 PLUS AIRCOAT ENAMEL SPRAYPACK - DPFSF
≤ 0.023“ ; 2.6 l/min 2353393 ACCESSORIES
ACCESSORIES
SUPERFINISH 23 PLUS TEMPSPRAY SPRAYPACK - DPFSF 2341496 TradeTip 3 FineFinish nozzles, different sizes (e.g. tip 210 - Art. Basic unit, SF 23 Plus on cart - Compressor AirBoost 100 2347935
554XXX
Basic unit, SF 23 Plus on cart - No. 517210) 5 litre hopper, M36x2 341265 AirCoat nozzle ACF 3000, different sizes 379XXX
2SpeedTip, different sizes 271XXX HP double hose, material DN4, max. 27 MPa, air DN6, 1/4“, 10 m 2302379 Blue air cap, incl. union nut 394911
5 litre hopper, M36x2 341265
5 litre hopper, M36x2 341265 AirCoat gun AC4600 Professional Pro Box 394155 Green air cap, incl. union nut 394912
TempSpray H 126 basic unit, 10 m 2311659
Nozzle extension, 30 cm, G-thread 556075 Nozzle ACF3000 11/40 379411 Red air cap, incl. union nut 394910
Airless gun Vector Grip, 1/4”, incl. TradeTip 3 nozzle holder,
538043 Nozzle extension, 60 cm, G-thread 556077
with 2- and 4-finger trigger Green air cap 394912 Union nut complete 394921
2SpeedTip, L10, 208 / 510 271042 Hydraulic oil Divinol 1 litre 21061 AirBoost 100 compressor 2347935 Gun filter, yellow, fine, set of 10 pieces, 97023
Gun filter red, 1 piece, 180 MA, 0.084 mm MW, extra fine 34383 TipClean; 200ml 2400214 AirCoat regulator, fitting kit 340250 Gun filter, red, extra fine, set of 10 pieces 97022
SUPERFINISH 23 CR SUPERFINISH 33 PRO SPRAYPACK
Professional injection and crack repair One diaphragm pump for every project – outstanding performance for
indoor and outdoor application
• Powerful: big diaphragm surface for perfect usage with • Ease of use: handy pressure regulation in low pressure • Versatile applications: The SuperFinish 33 Pro can • Quality LongStroke Technology (QLS): For a long
high viscosity materials and a long life time areas process a diverse range of materials and service a wide service life, easy maintenance and low wear.
• Variety of materials: suitable for Epoxy and Polyure- • Durable: All wetted parts out of stainless steel variety of industries and project sizes. • Practical multi-gun operation: For parallel use, a
thanes (PU), SPUR foam, aqueous solutions • Optimum efficiency and productivity: With a delivery distributor adapter for connecting up to three airless guns
• Simple: service, cleaning and maintenance directly on rate of 4.3 litres per minute, the SuperFinish 33 Pro is is available separately as an accessory.
the job site is no problem at all the most powerful WAGNER diaphragm pump in the
professional segment.
Ergonomic work: With the Airless
Easy to clean: 5 liters hopper for fast Easy to transport: Robust cart with gun Vector Pro. It is light and robust Easy to transport: Robust cart with
material changes and small quantity height-adjustable handle height-adjustable handle
processing. Hopper and various suction Inlet pusher valve: for a high operating
systems as accessories available. reliability and easy commissioning. Just
the press of a finger, and the valve is free
Inlet pusher valve: for a high operating
Large variety of materials with QLS
reliability and easy commissioning. Just
long-stroke technology: The optimised
the press of a finger, and the valve is free
hydraulics and special valve technology
make it possible
Brushless motor: maintenance fee and
comletely reliable
Pressure relief directly at the unit:
stainless steel ball valve - especially for
injection application
Fine adjustment: Smooth pressure
regulation from 0-250 bar for all appli-
cations.
Versatile: Easy to use with all commerci- Robust, building-site-friendly tires:
ally available injection packers allow easy transport across even the most
challenging terrain ACCESSORIES
TradeTip 3 FineFinish nozzles, different sizes (e.g. tip 211 - Art.
554XXX
ACCESSORIES No. 517211)
TradeTip 3 FineFinish nozzles, different sizes 554XXX
Airless Pistole AG 14; G-Gewinde 1/4“; inkl. TradeTip 3 ≤ 0.033“ ; 4.2 l/min
0502081A
Düsenhalter Nozzles TradeTip 3, different sizes 553XXX
2.6 l/min SUPERFINISH 33 PRO SPRAYPACK - DPFSF 2388 260
HP hose DN6, 27 MPa, NPSM 1/4“, 15m 9984574 Nozzles 2SpeedTip, different sizes 271XXX
SuperFinish 33 Pro, basic unit -
SUPERFINISH 23 CR Hose whip with mouthpiece 97057 5 litre hopper, M36x2 341265
Suction system, flexible 34630
Basic unit; SF 23 CR on cart - Seal for nozzle installation 43052 Nozzle extension, 30 cm, G-thread 556075
HP hose, DN6, PN270, NPSM 1/4“,15m 9984574
Pressure gauge combination HEA (MPa) 2383995 Nozzle extension, 60 cm, G-thread 556077
5 liter hopper, M36x2 341265
Airless gun Vector Pro, 1/4“, incl. TradeTip 3 nozzle holder,
SUPERFINISH 23 CR - DPFSF 2415601 0538040
Suction system flexibel 2393123 with 4-finger trigger Hydraulic oil Divinol 1 litre 21061
No Spraypack Suction system rigid 2405950 TradeTip3 nozzle 523 incl. white filter 553523 TipClean; 200ml 2400214HANDY ACCESSORIES SF 33 PLUS RECOMMENDED USE
SUPERFINISH 33 PLUS SPRAYPACK AIRLESS GUNS MATERIALS:
The extremely easy-to-use diaphragm pump for every project Vector Pro, 1/4“, incl. TradeTip 3 nozzle holder, with 4-finger
trigger
538040 Water and solvent-based Synthetic resin lacquers,
lacquers, lacquer paints, PVC lacquers, 2K
Vector Pro, 1/4“, incl. TradeTip 3 nozzle holder, with 2-finger oils, separating agents lacquers
538041
trigger
• Versatile applications: The SuperFinish 33 Plus can • Practical multi-gun operation: For parallel use, a Primers, fillers Fire protection, rust
Vector Grip, 1/4“, incl. TradeTip 3 nozzle holder, with 2- and
538043 protection paints
process a diverse range of materials and service a wide distributor adapter for connecting up to three airless guns 4-finger trigger
variety of industries and project sizes. is available separately as an accessory.
Vector Infinity, G-thread 1/4“, incl. TradeTip 3 nozzle holder, with
• Optimum efficiency and productivity: With a delivery • Flexible use: Switch the pump position with a single 538085
2-finger trigger Emulsion and latex Exterior paints, roof
rate of 4.3 litres per minute, the SuperFinish 33 Plus is hand movement from working with the top container to paints, adhesives, sea- coatings, floor coatings
AG 14, G-thread 1/4“, incl. TradeTip 3 nozzle holder 0502081A
the most powerful WAGNER diaphragm pump in the the rigid suction system with fine filter meshes. lants
professional segment.
AIRLESS HOSES OBJECT SIZE:
HP hose DN3, max. 27 MPa, NPS 1/4“, 7,5 m 9984583 For different project sizes
Ergonomic working: with the high HP hose DN6, max. 27 MPa, NPS 1/4“, 15 m 9984574
quality Vector Grip Airless gun. It is light, Includes a handy 230 V socket : to
robust and highly ergonomic connect additional devices, such as HP hose DN6, max. 27 MPa, NPS 1/4“, 30 m 9984575
TempSpray HP hose DN10, max. 25 MPa, 3/8“ NPSM, 15 m 2336583
TECHNICAL DATA
Inlet pusher valve: for a high operating AIRLESS NOZZLES
Modular variants: two-position cart
reliability and easy commissioning. Just 2SpeedTip nozzles, different sizes 271XXX Motor output 2.2 kW
for use with the top container or rigid
the press of a finger, and the valve is free Voltage 230 V / 50 Hz
suction system TradeTip 3 nozzles, different sizes 553XXX
Max. operating pressure 250 bar, 25 MPa
HEA ProTip nozzles, different sizes 554XXX
Illuminated multifunction switch Max. delivery rate 4.2 l/min
for extra safety: on/off as well as Delivery rate at 12 MPa spray pressure 3.8 l/min
circulation and spray mode. This prevents GUN FILTERS Max. nozzle size 0.033“
accidental switching on or off while the
Gun filter red, 10 pieces, 180 MA, 0.084 mm MW, extra fine 97023 Weight 50 kg
system is under pressure
Gun filter yellow, 10 pieces, 100 MA, 0.14 mm MW, fine 97022
Gun filter white, 10 pieces, 50 MA, 0.31 mm MW, medium 97024
Off Intake / Spray
Circula-
tion AIRCOAT ACCESSORIES
AirCoat gun AC 4500, incl. blue air cap and holder 2368269
HP double hose, material DN3, max. 27 MPa, air DN6, 1/4“,
9984595
Robust, building-site-friendly tires: Integrated toolbox: including a han- Direct suction: straight from the 7.5 m
allow easy transport across even the most dy organiser to ensure the right tools container for trouble- free working – AirCoat regulator, fitting kit 340250
challenging terrain and accessories are always at hand thanks to the special filter with ultra-fine
AirCoat nozzles ACF3000 (different sizes) 379XXX
filter mesh
OTHER
InlineRoller packaged in a plastic box, incl. HP hose DN4, 27
ACCESSORIES MPa, 7.5 m, extension complete 0.5 m, woven plush paint roller 345010
≤ 0.033“ ; 4.2 l/min TradeTip 3 FineFinish nozzles, different sizes (e.g. tip 211 - Art. short pile 13 mm, and so on
554XXX
SUPERFINISH 33 PLUS SPRAYPACK - DPFSF 2388259 No. 517211)
Adapter for multi-gun operation (up to 3 guns) 2304430
Nozzles 2SpeedTip, different sizes 271XXX
SuperFinish 33 Plus, basic unit - Double connector A = 1/4” x 1/4” 34038
5 litre hopper, M36x2 341265 CONNECTION OF UP TO THREE
Suction system, rigid, D38 2370310 Coupling sleeve I = 1/4“NPSM x A = 3/8“NPSM, 27 MPa 179732
Nozzle extension, 30 cm, G-thread 556075 GUNS
HP hose DN6, max. 27 MPa, NPSM 1/4“, 15 m 9984574 Hopper set, 5 litre, M36x2 341265 This way you work even 3 times fas-
Nozzle extension, 60 cm, G-thread 556077
Airless gun Vector Grip, 1/4“, incl. TradeTip 3 nozzle holder, PumpRunner 2306987 ter! The accessory is sold separately
0538043
with 2- and 4-finger trigger Hydraulic oil Divinol 1 litre 21061 (Secound gun kit art. no. 2413598).
Nozzle extension, 15 cm, G-thread 556074
2SpeedTip nozzle D20 115/421 0271046 Adapter for multi-gun operation (up to 3 guns) 2304430
Hose reel HR30, M16x1.5 (without hose) 2392523NOTES ELECTRIC PISTON PUMP
Especially high suction and delivery perfor-
mance – across the range
Do you mostly work with viscose or filler materials? Then an electric WAGNER piston pump is
the the best support for you. The high suction power produced by the piston‘s lifting motion
makes it ideal for this type of material.
Various performance classes for professional and semi-professional users: A powerful companion - inside and out:
With the third generation of piston pumps from WAGNER, you have a choice of WAGNER piston pumps are available with three different drive systems. Electric
machines for large or small sites. They cover a broad range of paints and emulsions piston pumps cover a wide range of performance classes and have a compact
- right through to high-viscosity and filler materials for interior and exterior use. design. The hydraulic piston pumps offer even better performance and are available
with a choice of either apetrol or electric motors which can be switched in a few
minutes. Pneumatically driven piston pumps from WAGNER are explosion-proof and
therefore are suitable for use in workshops.
1. BRUSHLESS MOTOR: 2. NO CONTINOUS RUNNING:
Brushless motors are a real benefit for this device, especially in terms of its long Piston pumps only operate when you have to build up pressure. The rest of the
service life. Alongside its efficient mode of working, its key advantages include a time, the drive is on ‚standby‘. This protects wear parts and has a positive impact on
constantly high torque with low power consumption and reduced heat generation. site noise levels.
CROSS-SECTION OF THE PISTON ADVANTAGES
• Powerful suction
• Better delivery capacity with high viscosity materials
• Less sensitive to filled materials
upper packing
• Large nozzle sizes can be used
• Extra-durable packing
lower packing
inlet-valve
outlet-valvePOWERPAINTER 90 EXTRA SPRAYPACK PROSPRAY 3.20 HEA SPRAYPACK
Fast, clean, perfect – the airless paint spraying system for small projects The compatible piston pump for Airless beginners
• Innovative, high-efficiency airless technology • Direct suction from the original container: The • Robust and simple: perfect for use on the construction • With flexible suction system: for simple intake directly
(HEA): The HEA ProTip nozzle ensures up to 55 % less airless paint spraying system extracts materials directly locations, reliable, easily accessible high quality packings from the original container
overspray, as well as a longer service life thanks to out of the paint bucket or varnish container. • Good performance at an attractive price: for medi- • Well-proven piston pump: ideal for comfortable
reduced spray pressure. um-sized projects, ideal for interior emulsion paints transport and space-saving storage
• Easy painting: Noticeably easier paint application • Innovative, low-pressure airless technology: up to
thanks to a soft spraying pattern with maximum control. 55 % less overspray due to HEA technology
HEA 517 nozzle: for a soft spray pattern
User-friendly: easy to operate and a re- and up to 55 % less spray mist
duced number of settings options makes
Comfortable: The variably adjustable Innovative HEA nozzle technology: starting up the sprayer easier.
telescopic handle allows a convenient two nozzle orafices, one directly in front Included: tool bag with two open-end
transport on the construction site and a of the other, guarantee a perfect spray spanners
space-saving storage of the device pattern with high material throughput
even in low pressure ranges
Lightweight airless gun with
Pressure gauge: Allows the perfect HEA pressure gauge: a longer service
four-finger trigger: for fatigue-free
control of pressure in coordination with life thanks to innovative HEA low-pres-
and safe work
the material being processed sure airless technology
Double-Acting-piston pump: for
consistent material feed
DN 6, 15 m high-pressure hose: for a
large radius of action.
Hose rewind: for optimised storage of
Inlet pusher valve: for a high operating Inlet pusher valve: for a high operating the hose
reliability and easy commissioning. Just reliability and easy commissioning. Just
Integrated storage box: Ideal for the press of a finger, and the valve is free the press of a finger, and the valve is free
storing tools and accessories
Also available as skid-version
Double-Acting-piston pump: for
consistent material feed
≤ 0.019“ ; 1.6 l/min
POWERPAINTER 90 EXTRA SPRAYPACK ≤ 0.021“ ; 1.6 l/min
ACCESSORIES
Basic unit, PowerPainter 90 Extra - PROSPRAY 3.20 HEA SPRAYPACK
Nozzle extension, 15 cm, G-thread 556074
Airless gun Vector Pro, 1/4”, incl. TradeTip 3 nozzle holder, with ACCESSORIES ProSpray 3.20 basic unit -
538040 Nozzle extension, 30 cm, G-thread 556075
4-finger trigger Airless Vector Grip gun, 1/4”, incl. TradeTip 3 nozzle holder, with HP hose DN6, 27 MPa, NPSM 1/4“, 15 m 9984574
538043 5 litre hopper 704-453
HP hose DN6, 15 m 523699 2- and 4-finger trigger Flexible suction system 0558672
Pressure gauge (HEA) 2383995 TradeTip 3 FineFinish nozzles, different sizes 554XXX HEA ProTip various sizes (e.g. 211 – Art-No 554211) 554XXX
Pressure gauge set assy. HEA(MPa) 2383995
HEA ProTip 517 554517 Nozzle extension, 15 cm, G-thread 556074 TradeTip3 Fine Finish various sizes 554XXX
Airless Vector Pro gun; 1/4”; incl. TradeTip 3 nozzle holder; with
538040
EasyGlide, special oil, 118 ml 508619 Nozzle extension, 30 cm, G-thread 556075 4-finger trigger TipClean 200 ml 2400214
PP 90 EXTRA SPRAYPACK - CART VERSION - DPPPE 2401275 EasyGlide, special oil, 118 ml 508619 HEA ProTip 517 554517 HP hose DN4, 27 MPa, NPS ¼“, 7.5 m 9984573
PP 90 EXTRA SPRAYPACK - SKID VERSION - DPPPE 2414079 TipClean; 200ml 2400214 PROSPRAY 3.20 HEA SPRAYPACK - DPPS 2412438 Lack Kit (DN 4) for ProSpray pumps 2406206PROSPRAY 20 HEA SPRAYPACK PROSPRAY 3.21 HEA SPRAYPACK
The robust piston pump for Airless beginners Small and compact – for small object sizes
• Built tough: for a long service life on the construction • Innovative ProSpray product features: for example • Innovative, low-pressure airless technology: up to • Compact design with outstanding performance
site new packings 55 % less overspray data: 0.023“ nozzle size, 2.0 l/min max., delivery rate: 16
• Compact and simple design • Optimum value-for-money: Ideal for all users who kg weight
• Easy handling: thanks to HEA technology mostly spray-coat small surfaces on a daily basis • With flexible suction system: for simple intake directly
• For trouble-free operation: Integrated high-pressure from the original container
• Optimised lifetime and performance
filter
HEA 517 Tip: soft spray pattern and up
HEA 517 nozzle: soft spray pattern and to 55% less overspray
Compact: for easy transportation and up to 55% less overspray
space-saving storage
Compact: for easy transportation and
space-saving storage
Maintenance made easy: With the
push of a button the piston is oiled and
thus the packings are conserved.
HEA Pressure Gauge: longer life thanks
to innovative HEA low-pressure airless DN6, 15 m high-pressure
technology hose: for a large radius of action
DN6, 15 m high-pressure hose: for a
large radius of action HEA Pressure Gauge: longer life Inlet pusher valve: for a high operating
thanks to innovative HEA low-pressure reliability and easy commissioning. Just
airless technology the press of a finger, and the valve is free.
Drip cup: possible residues in the suction
hose can be captured during transport
Practical cable wrap: for tidy storage
of the electric cable
≤ 0.021“ ; 1.6 l/min
PROSPRAY 20 HEA SPRAYPACK - DPPS 2403616 ≤ 0.023“ ; 2 l/min ACCESSORIES
ProSpray 20, basic unit - PROSPRAY 3.21 HEA SPRAYPACK - DPPS 532089 TradeTip 3 FineFinish nozzles, different sizes (e.g. tip 211 - Art.
ACCESSORIES 554XXX
Basic unit, PS 3.21 - No. 517211)
HP hose DN6, 27 MPa, NPSM 1/4“, 15 m 9984574
HEA ProTip, different sizes (e.g. tip 211 - Art.No. 517211) 554XXX Nozzles TradeTip 3, different sizes 553XXX
Flexible suction system 0558672A HP hose DN6, 27 MPa, NPSM 1/4“, 15 m 9984574
TradeTip 3 FineFinish nozzles, different sizes 554XXX Nozzle extension, 15 cm, G-thread 556074
Pressure gauge set assy. HEA(MPa) 2383995 Pressure gauge set assy. HEA(MPa) 2383995
5 litre hopper 704-453 Nozzle extension, 60 cm, G-thread 556077
Airless Vector Pro gun, 1/4”, incl. TradeTip 3 nozzle holder, with Airless Vector Grip gun, 1/4”, incl. TradeTip 3 nozzle holder,
538040 538043
4-finger trigger HP hose DN4, 27 MPa, NPS 1/4“, 7.5 m 9984573 with 2- and 4-finger trigger TipClean; 200ml 2400215
HEA ProTip 517 554517 Nozzle extension, 15 cm, G-thread 556074 HEA ProTip 517 554517 EasyGlide, special oil, 118 ml 508619PROSPRAY 3.25 SPRAYPACK PROSPRAY 3.31 SPRAYPACK
A compact emulsion unit for medium-sized objects A reliable unit for large-area emulsion work
• Innovative ProSpray product features: Digital • Lightweight: Just 17.9 kg (skid version) or 27.4 kg (cart • Electronic control, information and management • High coverage performance together with easy
information readout and unit control directly on the version) directly on the device: displays the current pressure, operation
device - piston oiled at the touch of a button - inlet valve • Two versions: Available on trolley or as a compact Skid pressure settings can be set and displayed, and much • Innovative ProSpray product features: Digital
depressor for high operating reliability - and more version more information readout and unit control directly on the
• Easy to handle: Compact design for ease of transport • No-maintenance brushless motor device - tilting carriage - integrated high-pressure filter
and space-saving storage - and more
Superb Spray Surface Quality: with Superb Spray Surface Quality: with No nozzle blockages: The high pressure
Clearly arranged - DESC-Control: the Vector Grip Airless gun. Light in the Vector Grip Airless gun. Light in filter is easily accessible and quick to
With the digital display you can read out weight with a long service life weight with a long service life clean. Three different filter inserts (fine,
and handle machine data, consumption medium, coarse) ensure an optimal
figures, runtimes and much more. The match with the material
Maintenance made easy: With the
intelligent deadband control, SlowMotion
push of a button the piston is oiled and Tilting cart: Fast change of the
function and FrequentClean guarantee
thus the packings are conserved container. Site-optimised tyres allow
trouble-free work and quick cleaning
convenient pump transport
Inlet pusher valve: for a high operating
reliability and easy commissioning. Just
Maintenance-free, brushless the press of a finger, and the valve is free Maintenance-free, brushless
direct current motor: Due to the direct current motor: Due to the
improved performance, the motor works improved performance, the motor works
even more efficiently at low and also even more efficiently at low and also
at high speeds. The continuous paint at high speeds. The continuous paint
pressure measurement controls the Also available as skid version
pressure measurement controls the
motor speed automatically, thus ensuring motor speed automatically, thus ensuring
a constant material pressure a constant material pressure
Clearly arranged - DESC-Control:
With the digital display you can read out
and handle machine data, consumption
figures, runtimes and much more. The
intelligent deadband control, SlowMotion
function and FrequentClean guarantee
trouble-free work
≤ 0.027“ ; 2.6 l/min
PROSPRAY 3.25 SPRAYPACK - DPPS ACCESSORIES ACCESSORIES
Basic unit, PS 3.25 on cart - TradeTip 3 FineFinish nozzles, different sizes (e.g. tip 211 - Art. ≤ 0.032“ ; 3.8 l/min TradeTip 3 FineFinish nozzles, different sizes (e.g. tip 211 - Art.
554XXX 554XXX
HP hose DN6, 27 MPa, NPSM 1/4“, 15 m 9984574 No. 517211) PROSPRAY 3.31 SPRAYPACK - DPPS 2308262 No. 517211)
Nozzles TradeTip 3, different sizes 553XXX Nozzles TradeTip 3, different sizes 553XXX
Airless Vector Grip gun, 1/4”, incl. TradeTip 3 nozzle holder, Basic unit, ProSpray 3.31 -
538043 Nozzle extension, 15 cm, G-thread 556074 Nozzle extension, 15 cm, G-thread 556074
with 2- and 4-finger trigger HP hose DN6, 27 MPa, NPSM 1/4“, 15 m 9984574
2SpeedTip, D10, 111 / 419 271045 Nozzle extension, 60 cm, G-thread 556077 Nozzle extension, 60 cm, G-thread 556077
Airless Vector Grip gun, 1/4”, incl. TradeTip 3 nozzle holder,
TipClean; 200ml 2400215 538043 TipClean; 200ml 2400215
PROSPRAY 3.25 SPRAYPACK - SKID VERSION 2308259 with 2- and 4-finger trigger
PROSPRAY 3.25 SPRAYPACK - CART VERSION 2308260 EasyGlide, special oil, 118 ml 508619 2SpeedTip, D20, 115/421 271046 EasyGlide, special oil, 118 ml 508619PROSPRAY 3.34 SPRAYPACK PROSPRAY 3.39 SPRAYPACK
A technology masterpiece for high-viscosity materials such as flame retar- Powerful emulsion unit for large areas
dants and corrosion-proofing products
• This high-performance piston pump: is ideally suited • Faster than ever: Quick-change fluid section for ease of • More power: Greater suction performance thanks to the • Innovative ProSpray product features: Tilting cart -
for large building sites where it is also able to handle servicing and shorter reaction times low position of the suction valve change paints without using tools
high-viscosity materials • Innovative ProSpray product features: Digital infor- • Twice as fast with emulsion: Parallel two-gun opera-
• No-maintenance brushless motor mation readout and unit control directly on the device - tion possible
• For large building sites: Powerful and robust tilting cart - integrated high-pressure filter - and more. • The most powerful pump in the ProSpray family:
Even able to cope with Airless spraying fillers
Tilting cart: Fast change of the No nozzle blockages: The
No nozzle blockages: The high pressure container. Site-optimised tyres allow high pressure filter is easily Tilting cart: Fast change of the
Superb Spray Surface Quality: with
filter is easily accessible and quick to convenient pump transport accessible and quick to clean. container. Site-optimised tyres allow
Superb Spray Surface Quality: with the Vector Grip Airless gun. Light in
clean. Three different filter inserts (fine, Three different filter inserts convenient pump transport
the Vector Grip Airless gun. Light in weight with a long service life
medium, coarse) ensure an optimal (fine, medium, coarse) ensure
weight with a long service life an optimal match with the
match with the material
material
Maintenance-free, brushless direct
Maintenance-free, brushless current motor: Due to the improved
direct current motor: Due to the performance, the motor works even
Clearly arranged - DESC-Control: Clearly arranged - DESC-Control: more efficiently at low and also at high
improved performance, the motor works
With the digital display you can read out With the digital display you can speeds. The continuous paint pressure
even more efficiently at low and also
and handle machine data, consumption read out and handle machine data, measurement controls the motor speed
at high speeds. The continuous paint
figures, runtimes and much more. consumption figures, runtimes and automatically, thus ensuring a constant
pressure measurement controls the
The intelligent deadband control, much more. The intelligent dead- material pressure
motor speed automatically, thus ensuring
SlowMotion function and FrequentClean band control, SlowMotion function
a constant material pressure
guarantee trouble-free work and quick and FrequentClean guarantee trou-
cleaning ble-free work and quick cleaning
Also available as filler version with
Airless gun AG 19
Low maintenance costs: The practical, Simple and quick: Change of the Low maintenance costs: The practical,
self-adjusting packings lead to less suction system without tools self-adjusting packings lead to less
wear and are easy to change. They have wear and are easy to change. They have
a service life up to 50% longer than a service life up to 50% longer than
comparable packings comparable packings
≤ 0.039“ ; 5 l/min PROSPRAY 3.39 FILLER SPRAYPACK - DPPS 2308264
ACCESSORIES PROSPRAY 3.39 EMULSION SPRAYPACK - DPPS 2351261 Basic unit, PS 3.39 -
≤ 0.034“ ; 4.5 l/min TradeTip 3 FineFinish nozzles, different sizes (e.g. tip 211 - Art. Basic unit, PS 3.39 - HP hose DN13, max. 25 MPa, 3/8“, NPSM 1/2“, 15 m 2336585
554XXX
PROSPRAY 3.34 SPRAYPACK - DPPS 2308263 No. 517211) HP hose DN6, 27 MPa, NPSM 1/4“, 15 m 9984574 Hose whip DN10, max. 25 MPa, NPSM 3/8“, 2.5 m 2336582
Nozzles TradeTip 3, different sizes 553XXX
Basic unit, PS 3.34 - Airless Vector Grip gun, 1/4”, incl. TradeTip 3 nozzle holder, Airless gun AG 19, 25 MPa, G-thread 3/8“, incl. TradeTip 3
Nozzle extension, 15 cm, G-thread 556074 538043 2341127
HP hose DN6, 27 MPa, NPSM 1/4“, 15 m 9984574 with 2- and 4-finger trigger nozzle holder
Nozzle extension, 60 cm, G-thread 556077 2SpeedTip, D40, 117/427 271048 2SpeedTip, S10, 235/527 271049
Airless Vector Grip gun, 1/4”, incl. TradeTip 3 nozzle holder,
538043
with 2- and 4-finger trigger TipClean; 200ml 2400215 Double connector A = 1/4“ NPS x 3/8“ NPT 812-003 Coupling sleeve I = 1/4“NPSM x A = 3/8“NPSM, 27 MPa 179732
2SpeedTip, D20, 115/421 271046 EasyGlide, special oil, 118 ml 508619 Double connector A = 3/8“ NPT x A = 1/2“ NPS 815-005 Connector 3/8“ x 1/2“ 814-005HYDRAULIC PISTON PUMP
HEAVYCOAT 750 SPRAYPACK
Even more suction and delivery power -
Compact power pack for heavy material
with denser materials
Do you mostly work with particularly high-viscosity or very dense materials? Then a WAGNER • Long service and reliability: thanks to Hydra- stroke heavy, filled and high-viscosity materials such as bitumen
piston pump is the perfect, reliable site companion for you. The exceptionally high suction and technology, the operating temperature is significantly and textured plaster over large areas.
transport power is produced by the piston‘s stroke movement. This is amplified even further reduced, thereby increasing the service life. • Superb performance and perfect surface results:
by the hydraulic drive and is particularly ideal for this type of material.
• New hydraulic design: inspired by mining and aviation even with long hoses.
for the toughest demands in terms of the piston pump‘s • Maximum user-friendliness: thanks to simple
working and delivery performance. operation.
Various performance classes for every professional: A powerful companion - inside and out: • Powerful: constant performance for the application of
the especially reliable hydraulic pump technology from WAGNER is most suited WAGNER piston pumps are available with three different drive systems. Electric
to large construction sites, with a broad spectrum of applications from building pro- piston pumps cover a wide range of performance classes and have a compact
tection and emulsion through to especially high-viscosity and very dense materials design. The hydraulic piston pumps offer even better performance and are available High pressure filter: for high reliability It is a quick and easy task: to depres-
for use inside and out. with a choice of either apetrol or electric motors which can be switched in a few and minimal downtime Quality spraying: with the high-per-
surise the unit
minutes. Pneumatically driven piston pumps from WAGNER are explosion-proof and formance gun AG 14. When used in
therefore are suitable for use in workshops. combination with the 2SpeedTip nozzle
for fillers, it is possible to handle even
Hydrastroke technology: the opera- high-viscosity materials without difficulty
ting temperature is reduced by up to
1. WITH EVEN MORE POWER ON THE 14 °C in comparison to previous hydraulic
CONSTRUCTION SITE: 2. NO CONTINOUS RUNNING: systems
The patented SSP (Special Spray Power) system from Piston pumps only operate when you have to build up pressure. The rest of the Available as an electrically driven or
WAGNER is a technology that is unique on the market time, the drive is on ‚standby‘. This protects wear parts and has a positive impact on petrol-driven model: The basic model
for the application of high viscosity materials. The site noise levels. Bucket holder: easy transport of the
without SSP is also available with a petrol
special design of the system ensures that the pump is material bucket
motor. This means that it can also be used
continually filled with sufficent material by the shovel on construction sites without an electrical
piston. SSP is available for all HeavyCoat models. connection
Ease of maintenance: Pump and
motor are easily accessible and the
Additional power “Special-Spray-Power” lower pump can be removed by loose-
for high viscosity materials ning just 4 screws. This makes the HC
Large pneumatic tyres: mean that the
750 particularly maintenance-friendly
unit is easy and comfortable to transport,
even on difficult terrain
CROSS-SECTION OF THE PISTON ADVANTAGES
Ideal cooling: The robust design of the Low valve or optionally selectable
• Better delivery capacity with extreme high viscosity materials housing cover with integrated ventilation SSP shovel piston: enable processing of
slots conducts air over all device compo- extremely high-viscosity materials
• Less sensitive to heavily filled materials
nents that convey hydraulic fluid
• High material pressure / material volume allow long hose
lengths
• Large nozzle sizes can be used
Hydraulic ≤ 0.043“ ; 6 l/min (E) / 7,6 l/min (G)
• Extra-durable packing
• Powerful suction HEAVYCOAT 750 E SPRAYPACK - DPHC 2371027
• Für zusätzliche Leistung umrüstbar auf SSP Basic unit, HC 750 E - ≤ 0.043“ ; 6 l/min (E) / 7,6 l/min (G)
HP hose DN13, max. 25 MPa, 3/8“, NPSM 1/2“, 15 m 2336585 HEAVYCOAT 750 E SSP SPRAYPACK
Hose whip DN10, max. 25 MPa, NPSM 3/8“, 2.5 m 2336582 Basic unit; HeavyCoat 750 E SSP -
upper packing Connector 3/8“ x 1/2“ 814-005 HP hose DN13, max. 25 MPa, 3/8“, NPSM 1/2“, 15 m 2336585
outlet-valve Airless gun AG 14, G-thread 1/4“, incl. TradeTip 3 nozzle holder 0502081A Hose whip DN10, max. 25 MPa, NPSM 3/8“, 2.5 m 2336582
lower packing 2SpeedTip, S10, 235/527 271049 Connector 3/8“ x 1/2“ 814-005
Übergangsstutzen I = 1/4“NPSM x A = 3/8”NPSM; 27 MPa 179732 Airless gun AG 14, G-thread 1/4“; incl. TradeTip 3 nozzle holder 0502081A
inlet-valve HEAVYCOAT 750 E SPRAYPACK - DPHC 2371027 2SpeedTip, S10, 235 / 527 271049
HEAVYCOAT 750 G SPRAYPACK - DPHC 2371029 HEAVYCOAT 750 E SSP SPRAYPACK - DPHC 2371028You can also read
