Test & Måleutstyr - Altius Gruppen AS
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Test & Måleutstyr
Ordering Informa�on
Part Number Descrip�on
HandGRIP
MicroFET handGRIP
5050-100 Standard
5050-100-C w/Receiver and Clinical So�ware
5050-100-FDC w/Receiver and FDC So�ware
Standard Accessories
User Manual
Calibra�on Cer�ficate
Wall pack power supply
Cloth storage bag
1 year warranty
Specifica�ons
Bluetooth enabled for wireless use
Measurement accuracy within 1%
Record, store and retrieve up to 30 tests
0-200 lb. force capacity range
Selectable units of measure:
Pounds (lbs.)
Newtons (N) The microFET HandGRIP dynamometer measures grip forces to test and
record grip strength deficits, evaluate consistency of effort, and to perform
Kilogram-force (kgf)
general handgrip strength assessments. microFET HandGRIP provides
Following tests can be performed: accurate, objective and quantifiable results for identifying areas of
weakness in the wrist and hand due to injury or disease.
Maximum Grip
5 Posi�on Grip Features:
• microFET digital HandGRIP features load cell sensor technology
Rapid Exchange Grip
combined with electronic board to provide a more accurate measure of
Hand Fa�gue Grip hand grip strength ideal for routine screening of grip strength and initial
and ongoing evaluations.
Low and high threshold se�ngs: • Easy to ready LCD displays shows peak force and duration/elapsed time
Low – 0.8 lb. to 200 lbs. in 0.1 lb. increments
• Durable, lightweight, molded body construction
• Use as stand-alone hand grip
High – 3 lbs. to 200 lbs. in 0.1 lb. increments • Bluetooth technology for cords free use with available clinical or data
collection research software.
Uses one lithium ion rechargeable ba�ery
Auto shutoff to conserve ba�ery life a�er 3 min.
| 1 |
Ordering Informa�on
Part Number Descrip�on
MicroFET 2
5021 Standard
5021-C w/Receiver and Clinical So�ware
5021-FDC w/Receiver and FDC So�ware
Standard Accessories
User Manual
Digit Transducer Pad
Flat Transducer Pad
Curved Transducer Pad
Muscle Tes�ng Posi�ons Wall Chart
Upper and Lower Body Test Recording Tablet
Carrying Case
The wireless microFET2 Digital Handheld Muscle Tester is an accurate,
portable Force Evaluation and Testing (FET) device. It is designed Calibra�on Cer�ficate
specifically for taking objective, reliable, and quantifiable muscle testing 1 year warranty
measurements. It is a modern adaptation of the time-tested art of hands-on
manual muscle testing. The microFET2 aids in diagnosis, prognosis, and Specifica�ons
treatment of neuromuscular disorders. Now with wireless capability, you
Bluetooth enabled for wireless use
can enjoy freedom from inconvenient cord tangling and being wired to the
data-collecting computer. No more cables, cords, or wires. Measurement accuracy within 1%
This unique, handheld device is battery operated, weighs less than a pound, Record, store and retrieve up to 30 tests
and is ergonomically designed to fit comfortably in the palm of your hand.
0-300 lb. force capacity range
The microFET2 uses sophisticated digital technology. Strain gauge elements
within the transducer react independently to measure external forces from Selectable units of measure:
multiple angles. This patented system enables the gauge to detect even
subtle changes in force regardless of the direction in which it is applied. Pounds (lbs.)
Newtons (N)
Features: Kilogram-force (kgf)
• Wireless Digital Handheld Dynamometer Low and high threshold se�ngs:
• Fits In The Palm of Your Hand - Palm Gauge
• Weighs Less Than a Pound Low – 0.8 lb. to 300 lbs. in 0.1 lb. increments
• Easy to Read LCD Display Located Directly on Gauge
High – 3 lbs. to 300 lbs. in 0.1 lb. increments
- shows peak force and duration
• For Use as Stand-Alone or with our Clinical or FET Data Collection Software Uses lithium ion rechargeable ba�ery
Auto shutoff to conserve ba�ery life a�er 3 min.
Patent # 5090421
| 2 |
Ordering Informa�on
Part Number Descrip�on
MicroFET 3
5026 Standard
5026-C w/Receiver and Clinical So�ware
5026-FDC w/Receiver and FDC So�ware
Standard Accessories
User Manual
Protocol Manual
Usage Charts for MT & ROM
Calibra�on Cer�ficate
Carrying Case
1 year warranty
Specifica�ons
Bluetooth enabled for wireless use
MT accuracy within 1%
ROM accuracy within 1°
5 Test Recording Pads
Record, store and retrieve up to 30 tests
The wireless microFET3 Muscle Testing Dynamometer and Range of Motion
0-150 lb. force capacity range Inclinometer is an accurate, portable Force Evaluation and Testing (FET)
device. It is designed specifically for taking accurate, objective muscle testing
Selectable units of measure: and range of motion measurements. Now you can perform two evaluations
with one gauge when diagnosing and treating muscular disorders.
Pounds (lbs.)
The gauge allows the clinician one free hand to stabilize and assist the patient.
Newtons (N) The microFET3 is the latest development in the field of diagnostic medicine
and provides fast and reliable results. Now with wireless capability, you can
Kilogram-force (kgf) enjoy freedom from inconvenient cord tangling and being wired to the
Following tests can be performed:
data-collecting computer. No more cables, cords, or wires.
Flat
Features:
Curved • Dual-Function Medical Device to Scientifically Measure
Muscle Testing and Range of Motion
Digit
• Can Perform Two Evaluation Functions Using a Single Gauge
Low and high threshold se�ngs: • Allows the Clinician One Free Hand to Stabilize and Assist the Patient
• Easy to Read LCD Display for Both Force and Angle Measurements
Low – 0.8 lb. to 150 lbs. in 0.1 lb. increments • For Use as Stand-Alone or with our Clinical or FET Data Collection Software
High – 3 lbs. to 150 lbs. in 0.1 lb. increments
Uses lithium ion rechargeable ba�ery
Auto shutoff to conserve ba�ery life a�er 3 min.
Patent # s6792801 & D490732
| 3 |
Ordering Informa�on
Part Number Descrip�on
MicroFET 6
5055 Standard
5055-C w/Receiver and Clinical So�ware
5055-FDC w/Receiver and FDC So�ware
Standard Accessories
User Manual
Calibra�on Cer�ficate
Wall pack power supply
Protocol Manual
ROM Wallchart
Carrying Case
1 year warranty
Specifica�ons
The wireless microFET6 Dual or Single Inclinometer is an accurate, portable
Bluetooth enabled for wireless use
Force Evaluation and Testing (FET) device. It is designed specifically for
taking accurate, objective range of motion measurements. It can be used as Tes�ng accuracy within 1°
a dual- or single-site inclinometer. A dual inclinometer is required by the
American Medical Association (AMA) Protocol Guide but the primary unit Measures in 1° increments from 0° to ± 180°
can be used when a single inclinometer is needed. Both primary and 3 test recording pads for manual tes�ng
secondary units are used when a clinician needs a dual inclinometer.
Easy to see results on the LCD screen
The microFET6 is ergonomically designed to be lightweight, weighing less
than one pound. This design provides optimal instrument placement and Uses lithium ion rechargeable ba�ery
spinal clearance. Now with wireless capability, you can enjoy freedom from Auto shutoff to conserve ba�ery life a�er 3 min.
inconvenient cord tangling and being wired to the data-collecting computer.
No more cables, cords, or wires.
Features:
• Dual or Single Site Inclinometer
• For use with American Medical Association (AMA) or
Diagnosis-Related Estimates (DRE) Testing Protocols
• Objective Range of Motion Test Results
• Easy-To-Read LCD Screen
• For Use as Stand-Alone or with our Clinical or FET Data Collection Software
| 4 |
Ordering Informa�on
Part Number Descrip�on BASELINE
Baseline
A B
A 12-1025HR Absolute+Axis® Goniometers 360
B 12-0480 Hydraulic pinch gauge
C 12-0286 Elektronisk hånd dynometer - 90 kg
D 12-0243 HiRes, large head, hydra. dynamo. 91kg
E 12-0241 LITE Hydraulic dynamometer, 91kg
F 12-0240 Hydraulic dynamometer, 91kg. C D
Div
G 12-1450 Wartenburg pinwheel
H 12-1521 Reflekshammer Babinsky
E F
G H
| 5 |
Ordering Informa�on
STABILIZER Part Number Descrip�on
Stabilizer
9296 Stabilizer Unit
Standard Accessories
Instruc�on Manual
pbf Stabilizer Pressure Cuff
Specifica�ons
The measuring range is from 0 to 200 mmHg
analog pressure with an accuracy of +/- 3 mmHz pressure.
Squeeze bulb to inflate, and loosen screw valve to deflate
Stabilizer Pressure Biofeedback for Core Stabilization Exercises
• A simple device, designed by physical therapists, which registers
changing pressure in an air-filled pressure cell allowing body movement,
especially spinal movement, to be detected during exercise.
• The unit consists of a combined gauge and inflation bulb
connected to a pressure cell
• Specifically used for exercises that focus on the protection and
stabilization of joints, which is important for the prevention and
treatment of low back and neck pain
• Used to monitor and provide feedback on body movement during
exercise to promote effective exercise to improve back and neck pain
| 6 |
Test & Måleutstyr
You can also read
