AUCTION CATALOG - WESTERN INDUSTRIAL TOOLING INC
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
AUCTION CATALOG – WESTERN INDUSTRIAL TOOLING INC
Start Date: 9:00 AM | Tuesday – September 14th
End Date: 9:00 AM | Tuesday – September 21st
Preview 8:00 AM to 4:00 PM | Monday, September 20th
14511 NE 87th Street – Redmond, WA 98052
13% BUYERS PREMIUM REMOVAL:
ALL SMALLER ITEMS MUST BE REMOVED NO
ALL SALES FINAL UPON AWARD OF ONLINE BID LATER THAN 12:00 PM, SATURDAY, SEPTEMBER
25TH. REMOVAL HOURS: 8:00 AM TO 4:00 PM,
TERMS & CONDITIONS WEDNESDAY – FRIDAY, SEPTEMBER 22ND – 24TH.
AND 8 AM – 12 PM SATURDAY, SEPTEMBER 25.
PAYMENT:
(NO FORKLIFT ASSISTANCE ON SATURDAY)
FULL PAYMENT MUST BE MADE NO LATER
**ALL MACHINERY WILL REQUIRE RIGGERS
THAN 5 PM, WEDNESDAY, SEPTEMBER 22ND. AND REMOVAL IS BY APPT ONLY UNTIL OCT
PAYMENT MUST BE MADE BY ONLINE CREDIT 6TH, PLEASE CALL HANK AT 206-979-8812 FOR
CARD OR WIRE TRANSFER ONLY. AFTER THE APPT. LOTS 865 & 866 THE PALLET JACKS MUST
AUCTION CLOSES & YOU RECEIVE YOUR STAY UNTIL MONDAY, SEPT 27TH.**THERE IS A
EMAILED INVOICE, PLEASE REPLY AND WE SMALL ELECTRIC FORKLIFT TO ASSIST IN
WILL CHARGE YOUR CARD ON FILE. LOADING GRANITE SURFACE BLOCKS &
WORK BENCHES-NO MACHINERY**
TO PAY ONLINE GO TO:
MURPHYAUCTION.COM/MAKEPAYMENT ONLINE BIDS:
WARRANTY DISCLAIMER: FAILURE TO AWARD BID - ONLINE BIDDERS
ALL SALES ARE FINAL. ALL ITEMS ARE BEING WILL NOT HAVE ANY CLAIM AGAINST THE
SOLD "AS IS, WHERE IS", WITH ALL FAULTS JAMES G. MURPHY CO. FOR FAILURE TO
AND WITHOUT ANY WARRANTIES AS TO SUBMIT BIDS TO THE AUCTIONEER OR ANY
MERCHANTABILITY OF FITNESS FOR A ERROR ON THE BIDDING PLATFORM. IN SOME
PARTICULAR PURPOSE. THE PRINCIPAL, THE INSTANCES, THE BIDDING PLATFORM MAY
AUCTIONEER, THE ADVERTISING SHOW AN ITEM AWARDED TO AN ONLINE
COORDINATOR, AND ANY OF THEIR AGENTS CUSTOMER; HOWEVER, WE RESERVE THE
MAKE NO EXPRESS OR IMPLIED WARRANTIES RIGHT TO WITHDRAW A BID AWARDED IN
OF ANY TYPE. ERROR.
ADVERTISING DISCLAIMER: SCAN THIS QR CODE FOR AUCTION
ALL INFORMATION WAS OBTAINED FROM CATALOG AND REGISTRATION
SOURCES DEEMED RELIABLE. ALTHOUGH
EVERY PRECAUTION HAS BEEN TAKEN TO
ENSURE ACCURACY, THE PRINCIPAL, THE
JAMES G. MURPHY CO., THE ADVERTISING
COORDINATOR AND ALL THEIR AGENTS
SHALL NOT BE RESPONSIBLE FOR ANY
ERRORS OR OMISSIONS THEREIN. IT IS FOR
THIS REASON THAT WE RECOMMEND THAT James G. Murphy Co.
ALL ITEMS BE THOROUGHLY INSPECTED Commercial & Industrial Auctioneers
PRIOR TO THE POINT OF SALE. 425.486.1246 – murphyauction.com
PO BOX 82160, Kenmore, WA 98028Machinery Riggers in the Seattle area The following regularly remove at auctions depending on availability Checkmate Rigging & Machinery Movers – 360-348-0120 Ness Campbell Crane & Rigging – 253-318-8437 cell / 800-932-6766 office s.powell@nesscampbell.com Omega Riggers & Erectors – 206-639-0036 dquinn@omegariggers.com Omega Morgan – 253-852-7500 Also doing Rigging Nelson Trucking – Rigging & Heavy Hauling – 800-327-2797 rigging@nelsontrucking.com
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
1 FISCHER DELTASCOPE MP30 9 NSP NSP-601A
Ne Ne
DIGITAL COATING THICKNESS GAGE W/CASE PNEUMATIC PENCIL TYPE GRINDER (NO AIRLINE
SERIAL NUMBER: 094-21287A KIT)
2 NSK PNEU-SONIC 10 NSP NSP-601A
Ne Ne
PNEUMATIC HIGH FREQUENCY PNEUMATIC PENCIL TYPE GRINDER (NO AIRLINE
GRINDING/POLISHING TOOL W/NSK AL-807A KIT)
PNEUMATIC AIRLINE KIT
11 FOREDOM SR-SERIES
3 NSK PNEU-SONIC Ne
Ne 18,000 RPM HIGH SPEED FLEXIBLE SHAFT
PNEUMATIC PENCIL TYPE GRINDER (NO AIRLINE GRINDING/POLISHING TOOL W/FOOT CONTROL,
KIT) 115V
4 NSK NSP-601A 12 FOREDOM SR-SERIES
Ne Ne
PNEUMATIC PENCIL TYPE GRINDER W/NSK AL-807A 18,000 RPM HIGH SPEED FLEXIBLE SHAFT
PNEUMATIC AIRLINE KIT GRINDING/POLISHING TOOL W/FOOT CONTROL,
MANUAL SPEED CONTROL & SPARE HEAD, 115V
5 NSK NSP-601A
Ne 13 ARTCO
PNEUMATIC PENCIL TYPE GRINDER W/NORGREN Ne
PNEUMATIC AIRLINE KIT 18,000 RPM HIGH SPEED FLEXIBLE SHAFT
GRINDING/POLISHING TOOL W/MANUAL SPEED
CONTROL, 115V
6 NSP NSP-601A
Ne
PNEUMATIC PENCIL TYPE GRINDER W/NORGREN 14 SONOTEC ULTRAFORM UF-5600
PNEUMATIC AIRLINE KIT Ne
ULTRASONIC LAPP & POLISHER, 115V
7 NSP NSP-601A
Ne 15 SONOTEC ULTRAFORM UF-5000 MICRO
PNEUMATIC PENCIL TYPE GRINDER W/WILKERSON Ne
PNEUMATIC AIRLINE KIT (MAY NEED NEW GAUGE) ULTRASONIC POLISHER, 115V
8 NSP NSP-601A 16 OXY/ACET OUTFIT W/(2) OWNER BOTTLES,
Ne Ne GAUGES,
PNEUMATIC PENCIL TYPE GRINDER W/WILKERSON
PNEUMATIC AIRLINE KIT (MAY NEED NEW GAUGE) HOSE, TORCH, GOOGLES & CART
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 2
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
17 MARSH R SERIAL NUMBER: 13005
Ne
1"/25 MM STENCIL MACHINE 23 1996 MORI-SEIKI SV-50/40
SERIAL NUMBER: 36001 Ne
3-AXIS VERTICAL MILLING CENTER W/20-TOOL
18 MARSH H CAT40 ATC, CHIP CONVEYOR, MORI-SEIKI MSC-516
Ne CONTROLS, MORI-SEIKI HC-P1 PENDANT
0.5"/25 MM STENCIL MACHINE CONTROLS, 220V, 3-PHASE (MACHINE IS SHOWING
SERIAL NUMBER: 24847 ERROR MESSAGE: SPINDLE SERIAL LINK THAT
REQUIRES SERVICE; BUYER MUST CAP ALL
ELECTRIC AL WIRES AT SAFETY SWITCH - NOT
19 MARSH Q INCLUDED, WILL REQUIRE A RIGGER TO MOVE)
Ne
SERIAL NUMBER: 624
0.25"/25 MM STENCIL MACHINE
SERIAL NUMBER: 5040
25 2008 SWI TRAK DPMSK5
Ne
20 2014 MATEC 30HV/K VERTICAL CNC MILL W/PROTO TRAK SMX
Ne
CONTROLS & CUTLER HAMMER TRANSFORMER,
5-AXIS MACHINING CENTER W/HSK-63 ATC, KUMA
230V, 3-PHASE (BUYER MUST CAP ALL ELECTRICAL
CHIP CONVEYOR, KUMA COOLANT TANK, RITTAL
WIRES AT SAFETY SWITCH - NOT INCLUDED, WILL
CHILLER, TRANSFORMER, REAR SAFETY
REQUIRE A RIGGER TO MOVE)
ENCLOSURE, SIEMENS SINUMERIK CONTROLS,
SERIAL NUMBER: 083CG16563
SIEMENS SINUMERIAK HT2 PENDANT CONTROLS,
400V, 3-PHASE (BUYER MUST CAP ALL ELECTRICAL
WIRES A T SAFETY SWITCH - NOT INCLUDED, WILL 26 2008 SWI TRAK DPMSK5
REQUIRE A RIGGER TO MOVE) Ne
SERIAL NUMBER: 1512 VERTICAL CNC MILL W/PROTO TRAK SMX
CONTROLS & CUTLER HAMMER TRANSFORMER,
230V, 3-PHASE (BUYER MUST CAP ALL ELECTRICAL
21 2001 RODERS TEC RFM-760/2 WIRES AT SAFETY SWITCH - NOT INCLUDED, WILL
Ne
REQUIRE A RIGGER TO MOVE)
3-AXIS PRECISION CNC HIGH SPEED MILL
SERIAL NUMBER: 081CG16127
W/20-TOOL ATC, APPROX. 21.5"X33.75" T-SLOT
TABLE, MKUK AIR-COOLED CHILLER, RODERS TEC
CONTROLS, PENDENT CONTROLS, SOFTWARE 27 2000 SWI TRAK DPM
UPDATED 2013, HOUR METER READS SINCE Ne
SOFTWARE UPDATE: 7,326, 230V, 3-PHASE (BUYER VERTICAL CNC MILL W/2018 PROTO TRAK KMX
MUST C ALL ELECTRICAL WIRES AT SAFETY CONTROLS, 440V, 3-PHASE (BUYER MUST CAP ALL
SWITCH - NOT INCLUDED, WILL REQUIRE A RIGGER ELECTRICAL WIRES AT SAFETY SWITCH - NOT
TO MOVE) INCLUDED, WILL REQUIRE A RIGGER TO MOVE)
SERIAL NUMBER: 88542-98 SERIAL NUMBER: 00-5071
22 2013 TOYODA FV1365 28 2000 SWI TRAK DPM
Ne Ne
3-AXIS VERTICAL MILLING CENTER W/30-TOOL VERTICAL CNC MILL W/PROTO A.G.E. 3 CONTROLS,
CAT40 ATC, CHIP CONVEYOR, FANUC SERIES OI-MD 440V, 3-PHASE (THIS MILL WILL BE DISCONNECTED
CONTROLS, TOSOKU PENDANT CONTROLS, HOUR BY PREVIEW, SAFETY SWITCH NOT INCLUDED,
METER READS: 6,854, 220V, 3-PHASE (BUYER MUST WILL REQUIRE A RIGGER TO MOVE)
CAP ALL ELECTRICAL WIRES AT SAFETY SWITCH - SERIAL NUMBER: 00-5074
NOT INCLUDED, WILL REQUIRE A RIGGE R TO
MOVE)
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 3
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
29 1998 SWI TRAK DPM SERIAL NUMBER: 237768
Ne
VERTICAL CNC MILL W/2018 PROTO TRAK KMX 35 BRIDGEPORT
CONTROLS, 440V, 3-PHASE (BUYER MUST CAP ALL Ne
ELECTRICAL WIRES AT SAFETY SWITCH - NOT 2 HP VERTICAL MILLING MACHINE W/9X42 T-SLOT
INCLUDED, WILL REQUIRE A RIGGER TO MOVE) TABLE, RAPID TRAVERSE, ACU-RITE III DIGITAL
SERIAL NUMBER: 98-4310 READOUT, 460V, 3-PHASE (BUYER MUST CAP ALL
ELECTRICAL WIRES AT SAFETY SWITCH - NOT
30 1998 SWI TRAK DPM INCLUDED, WILL REQUIRE A RIGGER TO MOVE)
Ne SERIAL NUMBER: 472500889Y
VERTICAL CNC MILL W/2018 PROTO TRAK KMX
CONTROLS, 440V, 3-PHASE (BUYER MUST CAP ALL 36 1996 CHARMILLES TECH ROBOFIL 6020
ELECTRICAL WIRES AT SAFETY SWITCH - NOT Ne
INCLUDED, WILL REQUIRE A RIGGER TO MOVE) WIRE EDM W/CHARMILLES
SERIAL NUMBER: 98-4281 GENERATOR/CONTROLS, CHARMILLES FILTER
CABINET, ADVANTAGE CHILLER, 460V
31 1998 SWI TRAK DPM TRANSFORMER, 3-PHASE (BUYER MUST CAP ALL
Ne ELECTRICAL WIRES AT SAFETY SWITCH - NOT
VERTICAL CNC MILL W/PROTO A.G.E. 3 CONTROLS, INCLUDED, WILL REQUIRE A RIGGER TO MOVE)
440V, 3-PHASE (BUYER MUST CAP ALL ELECTRICAL SERIAL NUMBER: 193256
WIRES AT SAFETY SWITCH - NOT INCLUDED, WILL
REQUIRE A RIGGER TO MOVE) 37 1997 CHARMILLES TECH ROBOFIL 4020S1
SERIAL NUMBER: 98-4129 Ne
WIRE EDM W/CHARMILLES CONTROLS,
32 1997 SWI TRAK DPM CHARMILLES FILTER CABINET, ADVANTAGE
Ne CHILLER, 460V TRANSFORMER, 3-PHASE (BUYER
VERTICAL CNC MILL W/PROTO A.G.E. 3 CONTROLS, MUST CAP ALL ELECTRICAL WIRES AT SAFETY
440V, 3-PHASE (BUYER MUST CAP ALL ELECTRICAL SWITCH - NOT INCLUDED, WILL REQUIRE A RIGGER
WIRES AT SAFETY SWITCH - NOT INCLUDED, WILL TO MOVE)
REQUIRE A RIGGER TO MOVE) SERIAL NUMBER: 173570
SERIAL NUMBER: 97-2917
38 1992 CHARMILLES TECH ROBOFIL 400
33 BRIDGEPORT SERIES I Ne
Ne EDM SINKER W/CT CONTROLS, HEIDENHAIN
2 HP VERTICAL MILLING MACHINE W/9X42 T-SLOT DIGITAL READOUT, WALKER CERAMAX 12"X24"
TABLE, RAPID TRAVERSE, ACU-RITE III DIGITAL MAGNETIC CHUCK, 3-PHASE (BUYER MUST CAP
READOUT, 460V, 3-PHASE (BUYER MUST CAP ALL ALL ELECTRICAL WIRES AT SAFETY SWITCH - NOT
ELECTRICAL WIRES AT SAFETY SWITCH - NOT INCLUDED, WILL REQUIRE A RIGGER TO MOVE)
INCLUDED, WILL REQUIRE A RIGGER TO MOVE) SERIAL NUMBER: 75668
SERIAL NUMBER: 249502
39 1997 CHARMILLES TECH FORM 20
34 BRIDGEPORT SERIES I Ne
Ne EDM SINKER W/CHARMILLES-EROWA ISOCUT
2 HP VERTICAL MILLING MACHINE W/9X42 T-SLOT SPINDLE HEAD CONTROLS, HEIDENHAIN DIGITAL
TABLE, RAPID TRAVERSE, ACU-RITE III DIGITAL READOUT, 3-PHASE (BUYER MUST CAP ALL
READOUT, 460V, 3-PHASE (BROKEN HANDLE, THIS ELECTRICAL WIRES AT SAFETY SWITCH - NOT
MACHINE WILL BE DISCONNECTED BY PREVIEW, INCLUDED, WILL REQUIRE A RIGGER TO MOVE)
SAFETY SWITCH NOT INCLUDED, WILL REQUIRE A SERIAL NUMBER: 200383
RIGGER TO MOVE)
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 4
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
40 1997 CHARMILLES TECH FORM 20 FOR PASS THRU, 15-1/2" 3-JAW CHUCK, DORIAN
Ne TOOL HOLDER, STEADY REST, TAIL STOCK,
EDM SINKER W/CHARMILLES-EROWA ISOCUT 230V,3-PHASE (BUYER MUST ALL ELECTRICAL
SPINDLE HEAD CONTROLS, HEIDENHAIN DIGITAL WIRES AT SAFETY SWITCH - NOT INCLUDED, WILL
READOUT, 3-PHASE (BUYER MUST CAP ALL REQUIRE A RIGGER TO MOVE)
ELECTRICAL WIRES AT SAFETY SWITCH - NOT SERIAL NUMBER: 161DT473
INCLUDED, WILL REQUIRE A RIGGER TO MOVE)
SERIAL NUMBER: 200376 47 2009 SWI TRAK 1840SX
Ne
41 ADVANTAGE IK-24A-41HF 18X40 CNC LATHE W/PROT TRAK SLX CONTROLS, 8"
Ne 3-JAW CHUCK, DORIAN TOOL HOLDER, TAIL STOCK,
3/4 HP CHILLER W/MEDIA GYCOL WATER COOLANT, 230V, 3-PHASE (NO STEADY REST, BUYER MUST CAP
460V, 3-PHASE (OPTION THAT CAN BE USED WITH ALL ELECTRICAL WIRES AT SAFETY SWITCH - NOT
EITHER LOT 39 OR 40) INCLUDED, WILL REQUIRE A RIGGER TO MOVE)
SERIAL NUMBER: 092CQ62455
42 CHARMILLES ISOPULSE P25
Ne 49 GRAZIANO SAG 17
ELERODA 110 PLUNGE EDM Ne
W/CHARMILLES-EROWA ISOCUT E-20 SPINDLE LATHE W/17" SWING X 56" OVERALL LENGTH, SONY
HEAD CONTROLS, 5"x10" MAGNETIC CHUCK, MANGESCALE LF-200 DIGITAL READOUT,
CUTTING OIL HYDRAULIC TANK, & WORKBENCH, ASSORTED GEARS, TOOLING & SHELF UNIT (BUYER
3-PHASE (BUYER MUST CAP ALL ELECTRICAL MUST CAP ALL ELECTRICAL WIRES AT SAFETY
WIRES AT SAFETY SWITCH - NOT INCLUDED, WILL SWITCH - NOT INCLUDED, WILL REQUIRE A RIGGER
REQUIRE A RIGGER TO MOVE TO MOVE)
SERIAL NUMBER: 53650 SERIAL NUMBER: N/A
43 REMCOR CH951-A 1530 50 MOORE 450-CPZ
Ne Ne
CHILLER, 230V, SINGLE PHASE (OPTION THAT CAN JIG GRINDER W/MOORE-GE FANUC CONTROLS,
BE USED FOR LOT 42, BUYER MUST CAP ALL 11X24 T-SLOT TABLE, & MOUNTED 11"X11" SINE
ELECTRICAL WIRES AT THE JUNCTION BOX) PLATE, 220V, 3-PHASE (BUYER MUST CAP ALL
SERIAL NUMBER: 4374 ELECTRICAL WIRES AT SAFETY SWITCH - NOT
INCLUDED, WILL REQUIRE A RIGGER TO MOVE)
SERIAL NUMBER: G4443
44 1996 CHARMILLES TECH SH2 CNC
Ne
SMALL HOLE POPPER, EDM W/CHARMILLES 51 1995 BLOHM PLANOMAT
CONTROLS, CHARMILLES FILTER CABINET, Ne
ADVANTAGE CHILLER, KENNEDY 8-DRAWER TOOL SURFACE GRINDER W/WAGNER 16X32 MAG CHUCK,
CABINET W/ACCESSORIES, 3-PHASE (BUYER MUST BLOHM CONTROLS, SCHMITT INDUSTRIES
CAP ALL ELECTRICAL WIRES AT SAFETY SWITCH - DYNAMIC BALANCE SYSTEM CONTROLLER 2500 &
NOT INCLUDED, WILL REQUIRE A RIGGER TO 460V TRANSFORMER, 3-PHASE (BUYER MUST CAP
MOVE) ALL ELECTRICAL WIRES AT JUNCTION BOX, WILL
SERIAL NUMBER: 96072094 REQUIRE A RIGGER TO MOVE)
SERIAL NUMBER: 14217
46 2016 SWI TRAK 2470SX
Ne 52 1992 OKAMOTO ACC 16-32DX
24X70 CNC LATHE W/PROT TRAK SLX CONTROLS, 4" Ne
DIA. BAR PASS THRU CAPACITY (CURRENTLY 2-1/8" SURFACE GRINDER W/16X32 MAG CHUCK,
DIA. CAP.), PNEUMATIC 2-1/8" DIA. BAR POSITIONER OKAMOTO CONTROLS, 460V, 3-PHASE (BUYER
MUST CAP ALL ELECTRICAL WIRES AT JUNCTION
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 5
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
BOX, WILL REQUIRE A RIGGER TO MOVE) 57 MITSUI HI-TEC MSG-200MH
SERIAL NUMBER: 68176 Ne
SURFACE GRINDER W/PG TECHNOLOGIES
53 MITSUI HI-TEC MSG-250MH OPTIDRESS WHEEL DRESSING ATTACHMENT,
Ne FACTSTOR DIGITAL CONTROLS, 6X12 MAG CHUCK,
SURFACE GRINDER W/WALKER 8X18 MAG CHUCK, WALKER MAGNETIC CHUCK CONTROL & SONY
WALKER MAGNETIC CHUCK CONTROL, MAGNESCALE LH11 DIGITAL READOUT, 460V,
VACUGUARD & SONY MAGNESCALE LH11 DIGITAL 3-PHASE (BUYER MUST CAP ALL ELECTRICAL
READOUT, 460V, 3-PHASE (BUYER MUST CAP ALL WIRES AT SAFETY SWIT CH - NOT INCLUDED, WILL
ELECTRICAL WIRES AT SAFETY SWITCH - NOT REQUIRE A RIGGER TO MOVE)
INCLUDED, WILL REQUIRE A RIGGER TO MOVE) SERIAL NUMBER: 95068359
SERIAL NUMBER: 93035762
58 MITSUI HI-TEC MSG-200MH
54 MITSUI HI-TEC MSG-250MH Ne
Ne SURFACE GRINDER W/6X12 MAG CHUCK, WALKER
SURFACE GRINDER W/8X18 MAG CHUCK, WALKER MAGNETIC CHUCK CONTROL, VACUGUARD &
MAGNETIC CHUCK CONTROL & VACUGUARD (NO SONY MAGNESCALE LH11 DIGITAL READOUT, 460V,
READOUT); 460V, 3-PHASE (BUYER MUST CAP ALL 3-PHASE (BUYER MUST CAP ALL ELECTRICAL
ELECTRICAL WIRES AT SAFETY SWITCH - NOT WIRES AT SAFETY SWITCH - NOT INCLUDED, WILL
INCLUDED, WILL REQUIRE A RIGGER TO MOVE) REQUIRE A RIGGER TO MOVE)
SERIAL NUMBER: 89105370 SERIAL NUMBER: 93037911
55 MITSUI HI-TEC MSG-200MH 59 MITSUI HI-TEC MSG-200MH
Ne Ne
SURFACE GRINDER W/UNISON C-M DEDTRU SURFACE GRINDER W/6X12 MAG CHUCK, WALKER
CENTERLESS GRINDING FIXTURE, SONY MAGNETIC CHUCK CONTROL, VACUGUARD &
MAGNESCALE LH11 DIGITAL READOUT, ASSORTED SONY LH51-2 DIGITAL READOUT, 460V, 3-PHASE
MOUNTED GRINDING WHEELS, MISC SUPPLIES & (BUYER MUST CAP ALL ELECTRICAL WIRES AT
SUPPLY CART, 460V, 3-PHASE (BUYER MUST CAP SAFETY SWITCH - NOT INCLUDED, WILL REQUIRE A
ALL ELECTRICAL WIRES AT SAFETY SWITCH - NOT RIGGER TO MOVE)
INCLUDED, WILL REQUIRE A RIGGER TO MOVE)
SERIAL NUMBER: 93037909 60 MITSUI HI-TEC MSG-SERIES
Ne
56 MITSUI HI-TEC MSG-200MH SURFACE GRINDER W/6X12 MAG CHUCK, WALKER
Ne MAGNETIC CHUCK CONTROL, VACUGUARD &
SURFACE GRINDER W/PG TECHNOLOGIES SONY LH51-2 DIGITAL READOUT, 460V, 3-PHASE
OPTIDRESS WHEEL DRESSING ATTACHMENT, (BUYER MUST CAP ALL ELECTRICAL WIRES AT
FACTSTOR DIGITAL CONTROLS, 6X12 MAG CHUCK, SAFETY SWITCH - NOT INCLUDED, WILL REQUIRE A
WALKER MAGNETIC CHUCK CONTROL & SONY RIGGER TO MOVE)
MAGNESCALE LH11 DIGITAL READOUT, SMALL
WALL MOUNTED CABINET W/ASSORTED 61 MITSUI HI-TEC MSG-200MH
ACCESSORIES, 460V, 3-PHASE (BUYER MUST CAP Ne
ALL ELECTRICAL WIRES AT SAFETY SWITCH - NOT SURFACE GRINDER W/6X12 MAG CHUCK, WALKER
INCLUDED, WILL REQUIRE A RIGGER TO MOVE) MAGNETIC CHUCK CONTROL, VACUGUARD &
SERIAL NUMBER: 94028081 SONY MAGNESCALE LH11 DIGITAL READOUT, 460V,
3-PHASE (BUYER MUST CAP ALL ELECTRICAL
WIRES AT SAFETY SWITCH - NOT INCLUDED, WILL
REQUIRE A RIGGER TO MOVE)
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 6
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
62 BOYAR SCHULTZ CHALLENGER H612 69 EX-CELL
Ne Ne
SURFACE GRINDER W/WALKER 6X12 MAG CHUCK & 5 HP PORTABLE AIR COMPRESSOR W/30-GALLON
VACUGUARD (NO PLATE), 460V, 3-PHASE (BUYER AIR TANK, 120V
MUST CAP ALL ELECTRICAL WIRES AT SAFETY
SWITCH - NOT INCLUDED, WILL REQUIRE A RIGGER
70 STANDARD
TO MOVE) Ne
5'X7' ENCLOSED SPRAY BOOTH W/DOUBLE DOORS,
63 BROWN & SHARPE EXPLOSION PROOF LIGHTS, MAKEUP AIR,
Ne STANDARD CONTROLS RACK W/HONEYWELL
CYLINDRICAL GRINDER, 230V, 3-PHASE (BUYER SMART VFD HVAC CONTROLS, STANDARD TOOLS &
MUST CAP ALL ELECTRICAL WIRES AT SAFETY EQUIPMENT PUSH BUTTON CONTROL BOX,
SWITCH - NOT INCLUDED, WILL REQUIRE A RIGGER EXHAUST UNITS ON TOP OF PAINT BOOTH,
TO MOVE) DUCTING FROM PAINT BOO TH TO EXHAUST PORTS
ON SIDE OF BUILDING ($1,500 REFUNDABLE
DAMAGE DEPOSIT REQUIRED, EXHAUST PORTS
64 KAESER BS-51
Ne COVERS MUST REMAIN UNLESS BUYER COVERS &
40 HP ROTARY SCREW AIR COMPRESSOR, 460V, SECURES THE HOLES W/(2) STAINLESS STEEL CAPS,
3-PHASE (BUYER MUST CAP ALL ELECTRICAL (SPRINKLER HEAD HAS BEEN REMOVED)
WIRES AT SAFETY SWITCH - NOT INCLUDED)
71 STANDARD INFRARED SRP1600
Ne
65 KAESER KRD150
Ne 1,600 WATT INFRARED CURING LIGHT MOUNTED
REFRIGERATED AIR DRYER, 150 SCFM@100 PSI, ON STAND W/CASTERS, 100-120V
208-230V, 3-PHASE (BUYER MUST CAP ALL
ELECTRICAL WIRES AT SAFETY SWITCH - NOT 72 ZOELLER SMILE 42
INCLUDED. IF THE DRYER IS REMOVED THRU THE Ne
DOORWAY FROM THE SMALL SIDE ROOM, THE CNC TOOL PRESETTING MACHINE W/ZOLLER
BUYER IS RESPONSIBLE FOR PUTTING THE FRAME CONTROLS, (3) ASSORTED SIZED SETTING MOUNTS
BACK O N THE DOORWAY & ENSURE THAT THE & CABINET
DOOR IS USABLE) SERIAL NUMBER: SMILE420X-01162
66 ASME VERTICAL AIR RECEIVING TANK 73 OPTIMA B1715
Ne Ne
DRILL SHARPENER W/TOOLING, 110V
67 INGERSOLL RAND 2475N7.5
Ne
7.5 HP 2-STAGE VERTICAL AIR COMPRESSOR, 175 74 CUTTERMASTER HDT-30
PSIG W/80-GALLON AIR TANK, 460V, 3-PHASE Ne
(BUYER MUST CAP ALL ELECTRICAL WIRES AT TOOL GRINDER W/RADIUS ATTACHMENT &
SAFETY SWITCH - NOT INCLUDED) TOOLING, 110V
SERIAL NUMBER: 802260040
75 SOE FEINMECHANIK
68 DEVILBISS AIR POWER Ne
Ne TOOL GRINDER/INSPECTOR W/CABINET, 110V
5 HP PORTABLE AIR COMPRESSOR W/30-GALLON
AIR TANK, 120V
76 12" INDUSTRIAL METAL DISC SANDER
Ne MOUNTED ON
STAND, 3 HP/1,735 RPM, 230/460V, 3-PHASE
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 7
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
77 SEARS CRAFTSMAN 397.1944 85 CHAMPION
Ne Ne
7" DOUBLE END BENCH GRINDER MOUNTED ON 196 CC GAS TRASH PUMP (LAST USED TO PUMP
STAND, 1/4 HP, 115V WASTE OIL)
78 DAYTON 2Z341M 86 DAKE 50H
Ne Ne
7" DOUBLE END BENCH GRINDER MOUNTED ON 50-TON MANUAL HYDRAULIC PRESS
STAND, 1/2 HP, 115V
87 SOLBERGA SENR11
79 DAYTON 4Z908B Ne
Ne GEARHEAD DRILL PRESS, 220V ,
7" DOUBLE END BENCH GRINDER MOUNTED ON SERIAL NUMBER: 1004
STAND, 1/2 HP, 115V
88 JET 14M
80 BALDOR 500 Ne
Ne COUNTERTOP MULTISPEED DRILL PRESS, 115V
6" DOUBLE END BENCH GRINDER MOUNTED ON
STAND, 1/2 HP, 115V
89 WESTHOFF
Ne
81 LUCIFER FURNACES 7022-AM-F HORIZONTAL MICRO DRILL, 110V
Ne SERIAL NUMBER: WM100-1 951307
2,150 DEGREE FAHRENHEIT ELECTRIC HEAT
TREATMENT FURNACE MOUNTED ON BASE
90 WESTHOFF
W/BARBER-COLMAN 560 CONTROLS, 13.0 KW, 480V, Ne
3-PHASE HORIZONTAL MICRO DRILL W/LIGHT, 110V
SERIAL NUMBER: 4114 SERIAL NUMBER: 80-957 (100-01)
82 AMERICAN MS1 MTC-SYSTEM 91 MICRO-MARK MICROLUX
Ne Ne
8-ZONE CONTROLLER ON CASTERS, 3-PHASE VARIABLE SPEED MINIATURE DRILL PRESS
(FORMERLY USED WITH A MOLD INJECTION W/DIGITAL DEPTH FINDER, 110V
MACHINE)
SERIAL NUMBER: 960555 / 4793
92 WIP STRIPMATE 700
Ne
83 SAFETY-KLEEN SK34 COAXIAL CABLE STRIPPER W/FOOT CONTROL, 115V
Ne
PARTS WASHER W/LIGHT, 115V
SERIAL NUMBER: 3413177 93 DAYTON
Ne
1/6 HP PORTABLE VACUUM PUMP W/SOFT BAG,
84 42" BLAST CABINET W/PNEUMATIC TOOL & 115V
Ne INTERNAL
LIGHT, 115V (NO VACUUM RECLAMATION SYSTEM, 94 ARBOR PRESS
AS WAS DIRECTLY ATTACHED TO DUST Ne
COLLECTOR)
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 8
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
95 NIT 2 106 KURT D688
Ne Ne
ARBOR PRESS 6" MACHINIST VISE
96 TRU POWER 107 KURT D675
Ne Ne
12" CUT-OFF SAW, 4,000 RPM, 115V 6" MACHINIST VISE
97 LOT, REMAINING DESICCANT IN THESE (3) 108 KURT D675
Ne CONTAINERS Ne
6" MACHINIST VISE
98 1-TON PUSH TROLLEY
Ne 109 KURT D675
SERIAL NUMBER: 97392 Ne
6" MACHINIST VISE
99 FOAM FACTORY
Ne 110 KURT
150W INDUSTRIAL HOT KNIFE W/ACCESSORIES & Ne
CASE 6" MACHINIST VISE
100 KENNEDY 111 KURT
Ne Ne
PORTABLE TOOLBOX & KENNEDY 2-DRAWER TOOL 6" MACHINIST VISE
CHEST W/CONTENTS
112 KURT
101 KURT ANGLOCK SCMX425 Ne
Ne 6" MACHINIST VISE
4" 5-AXIS VISE
113 KURT
102 KURT D688 Ne
Ne 6" MACHINIST VISE
6" MACHINIST VISE
114 KURT
103 KURT D688 Ne
Ne 6" MACHINIST VISE
6" MACHINIST VISE
115 KURT ANGLOCK
104 KURT D688 Ne
Ne 6" MACHINIST VISE
6" MACHINIST VISE
116 KURT ANGLOCK
105 KURT D688 Ne
Ne 6" MACHINIST VISE
6" MACHINIST VISE
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 9
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
117 KURT ANGLOCK 129 6" MACHINIST VISE
Ne Ne
6" MACHINIST VISE
130 6" MACHINIST VISE
Ne
118 KURT D675 131 KURT
Ne Ne
6" MACHINIST VISE 8" MACHINIST VISE
119 KURT D675 132 KURT
Ne Ne
6" MACHINIST VISE 8" MACHINIST VISE
120 KURT D675 133 KURT
Ne Ne
6" MACHINIST VISE 8" MACHINIST VISE
121 KURT D60 134 KURT
Ne Ne
6" MACHINIST VISE 8" MACHINIST VISE
122 KURT D60 135 LOT, ASSORTED SOFT JAWS
Ne Ne
6" MACHINIST VISE
136 LOT, ASSORTED HAND JAWS
Ne
123 KURT D60
Ne 137 MACHINIST SWIVEL BASE
6" MACHINIST VISE Ne
138 MACHINIST SWIVEL BASE
124 KURT D60 Ne
Ne 139A MACHINIST SWIVEL BASE
6" MACHINIST VISE Ne
139B MACHINIST SWIVEL BASE
125 KURT Ne
Ne
139C MACHINIST SWIVEL BASE
6" MACHINIST VISE
Ne
140 LOT, ASSORTED 6" MACHINIST VISE
126 KURT Ne HANDLES
Ne
6" MACHINIST VISE
141 5" X-Y LIGHT DUTY MACHINIST VISE
Ne
127 6" MACHINIST VISE
Ne 142 4" ADJUSTABLE LIGHT DUTY MACHINIST
Ne VISE
128 6" MACHINIST VISE
Ne
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 10
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
143 6" LIGHT DUTY MACHINIST VISE 158 LOT, (3) GROUNDING BLOCKS
Ne Ne
144 LOT, (3) LIGHT DUTY MACHINIST VISES 159 LOT, ASSORTED SET UP BLOCKS
Ne Ne
145 ADVANCE 160 LOT, ASSORTED SET UP & ANGLE BLOCKS
Ne Ne
15" X 15" T-SLOT ROTARY TABLE ATTACHMENT
161 LOT, ASSORTED ANGLE BLOCKS (UNDER
Ne TABLE)
146 12" DIA ROTARY TABLE ATTACHMENT
Ne
162 LOT, ASSORTED MARKED ANGLE BLOCKS
147 10" DIA ROTARY TABLE ATTACHMENT Ne (UNDER TABLE)
Ne
148 VOLSTRO 163 LOT, ASSORTED SET UP BLOCKS
Ne Ne
ROTARY HEAD ATTACHMENT W/CASE
164 LOT, ASSORTED V-BLOCK CLAMPS
Ne
149 10"D X 12"W X 6"H WORKING SURFACE 165 LOT, 2-7/8" ADJUSTABLE SET UP BLOCKS
Ne T-SLOT ANGLE Ne
PLATE
166 LOT, (2) ASSORTED ADJUSTABLE SET UP
Ne BLOCKS
150 11-1/2" X 12" ADJUSTABLE T-SLOT ANGLE
Ne PLATE
167 PAIR OF 2" X 2" X 26" PARALLELS
Ne
151 APPROX 2" DIA X 48" GROUND
Ne CYLINDRICAL PRECISION 168 LOT, (3) 2" X 4" X 16" PARALLELS
BAR Ne
169 LOT, (4) 2" X 3-1/2" X 6" UNDRILLED
152 APPROX 3" DIA X 37" GROUND Ne SOLID BLOCKS
Ne CYLINDRICAL PRECISION
BAR 170 6"D X 8"W X 5"H MAGNETIC BLOCK
Ne
153 MOORE 171 PAIR OF 6" X 6" X 8" PARALLEL BLOCKS
Ne Ne
123 BLOCKS W/CASE
172 PAIR OF 5-3/4" X 5-3/4" X 6" PARALLEL
Ne BLOCKS
154 LOT, PRECISION BASE W/ACCESSORIES
Ne
173 LOT, (4) 2" X 4" X 6-1/2" PARALLEL BLOCKS
155 LOT, (2) V-BLOCKS Ne
Ne
174 ERON
156 LOT, (3) V-BLOCKS Ne
Ne 8"W X 10"D X 12"H ANGLE PLATE
157 LOT, (4) 2" X 4" X 6" 1-2-3-4-5 BLOCKS
Ne 175 5-1/2"W X 6"D X 12" H ANGLE PLATE
Ne
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 11
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
176 BETHLEHEM USA 188 BRINEY HSK63APTB-200-100
Ne Ne
20"W X 6-1/2"D X 5-3/4"H ANGLE PLATE PRECISION TEST BAR W/CASE
177 4"W X 10"D X 8-1/2"H ANGLE PLATE 189 PAIR OF 2" X 4" X 20" MATEC
Ne Ne COMPATIBLE PARALLELS
178 7"W X 9"D X 10"H ALUMINUM ANGLE PLATE
Ne 190 LOT, ASSORTED PARTS FOR MATEC TO
Ne INCLUDE: (2)
179 KOPAL FORCE 14
Ne SIEMENS SME120 SENSOR MODULE EXTERNAL,
LOT, (2) ADJUSTABLE PIN VISE SPECIAL ADAPTER PLUGS & MISC ACCESSORIES
180 18"W X 10-1/2"D X 8"H MOUNTABLE 191 RENISHAW RMP600 RENGAGE
Ne ALUMINUM BLOCK Ne
SURFACE PROBE MOUNTED ON MATEC TOOL
HOLDER
181 LOT, (51) ASSORTED MATEC TOOL HOLDERS
Ne W/TOOL CART
ON CASTERS 192 RENISHAW MP700
Ne
SURFACE PROBE MOUNTED ON RODERS TOOL
182 LOT, (52) ASSORTED MATEC TOOL HOLDERS HOLDER
Ne W/TOOL CART
ON CASTERS
193 RENISHAW MP700
Ne
183 LOT, (4) ASSORTED BORING HEADS (2 ARE SURFACE PROBE MOUNTED ON RODERS TOOL
Ne ADJUSTABLE HOLDER
SECO) W/MATEC TOOL HOLDERS
194 M&H INPROCESS TYPE 32.00-MINI #1245
Ne
184 LOT, (5) ASSORTED BORING HEADS SURFACE PROBE MOUNTED ON RODERS TOOL
Ne W/MATEC TOOL HOLDER
HOLDERS
195 RENISHAW
185 ROTA-S PLUS Ne
Ne SURFACE PROBE MOUNTED ON CAT40 TOOL
13" MATEC-COMPATIBLE 3-JAW CHUCK HOLDER
186 LEAVE 196A RENISHAW MP700
Ne Ne
MATEC COMPATIBLE TOMBSTONE SURFACE PROBE MOUNTED ON CAT40 TOOL
HOLDER
187 SOLID BALL
Ne 196B RENISHAW MP700
MATEC COMPATIBLE PROBE Ne
SURFACE PROBE MOUNTED ON CAT40 TOOL
HOLDER
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 12
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
196C VOGEL MKU2- RW3-22001+428 207 LOT, (36) ASSORTED CAT40 TOOL HOLDERS
Ne Ne W/HUOT
SINGLE LINE LUBRICANT PUMP W/2.7 LITER TANK,
230V (USED) TOOLSCOOT CART ON CASTERS
197 LOT, ASSORTED RENISHAW PROBE TIPS & 208 LOT, (36) ASSORTED CAT40 TOOL HOLDERS
Ne ACCESSORIES Ne W/HUOT
TOOLSCOOT CART ON CASTERS
198 LOT, (23) ASSORTED RODERS TOOL HOLDERS
Ne
199 LOT, (24) ASSORTED RODERS TOOL HOLDERS 209 LOT, (36) ASSORTED CAT40 TOOL HOLDERS
Ne Ne W/HUOT
200 LOT, (36) ASSORTED CAT40 TOOL HOLDERS TOOLSCOOT CART ON CASTERS
Ne W/HUOT
TOOLSCOOT CART ON CASTERS 210 LOT, (36) ASSORTED CAT40 TOOL HOLDERS
Ne W/CART ON
CASTERS
201 LOT, (36) ASSORTED CAT40 TOOL HOLDERS
Ne W/HUOT
211 LOT, (36) ASSORTED CAT40 TOOL HOLDERS
TOOLSCOOT CART ON CASTERS Ne W/RACK (NOT
ON CASTERS)
202 LOT, (36) ASSORTED CAT40 TOOL HOLDERS
Ne W/HUOT 212 D'ANDREA ELETTRA 50
Ne
TOOLSCOOT CART ON CASTERS FINISH BORING HEAD W/CAT40 TOOL HOLDER,
ACCESSORIES & CASE
203 LOT, (36) ASSORTED CAT40 TOOL HOLDERS
Ne W/HUOT 213 D'ANDREA TRM50
Ne
TOOLSCOOT CART ON CASTERS FINISH BORING HEAD MOUNTED ON CAT40 TOOL
HOLDER
204 LOT, (36) ASSORTED CAT40 TOOL HOLDERS
Ne W/HUOT 214A KPT KAISER
Ne
TOOLSCOOT CART ON CASTERS 1/64" - 1-1/16" BORING HEAD MOUNTED ON CAT40
TOOL HOLDER
205 LOT, (36) ASSORTED CAT40 TOOL HOLDERS
Ne W/HUOT 214B 1-9/32" - 1-21/32" BORING HEAD MOUNTED
Ne ON CAT40
TOOLSCOOT CART ON CASTERS TOOL HOLDER
206 LOT, (36) ASSORTED CAT40 TOOL HOLDERS 215 LOT, (5) EXTENSION MODULES W/(2)
Ne W/HUOT Ne CAT40 TOOL
HOLDERS
TOOLSCOOT CART ON CASTERS
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 13
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
216 LOT, (3) CAT40 TOOL HOLDERS (UNUSED) 229 LOT, ASSORTED CAT40 TOOL POSTS
Ne Ne
217 6" FACE MILL MOUNTED ON CAT40 TOOL 230 JOHNSON-FLUITEN GFLA009028405/01
Ne HOLDERS Ne
ROTARY UNION (FOR USE IN TOYODA, LOT 22)
218 LOT, (4) ASSORTED BORING HEADS
Ne MOUNTED 231A GRUNDFOS A-97568363-P2-1839
ON CAT40 Ne
TOOL HOLDERS 16.4 GPM COOLANT PUMP, 1 HP, 208-230/440-480V, 3
PHASE (BACKUP PUMP FOR TOYODA LOT 22)
219 LOT, (4) ASSORTED BORING HEADS
Ne MOUNTED 231B 1/4 HP PUMP, 220/440V, 3 PHASE
ON CAT40 Ne
TOOL HOLDERS
232 SIEMENS ED43B025 SENTRON SERIES
Ne
220 LOT, (4) ASSORTED BORING HEADS & (2) TYPE ED4 480V, 3 PHASE CIRCUIT BREAKER
Ne CAT40 TOOL
HOLDERS
233 BALDOR HYPRO SERIES 4001
Ne
221 LOT, (4) ASSORTED BORING HEADS 0.5 HP/1,725 RPM ROLLER PUMP, 208-230/460V, 3
Ne MOUNTED PHASE
ON CAT40
TOOL HOLDERS
234 6' MATEC TOOL POST CHANGING BENCH
Ne (6-DRAWER
222 INGERSOLL AX2K-30R02
Ne UNDERCOUNTER TOOL CHEST SOLD SEPARATELY
3" ROUTER FACE MILL FOR ALUMINUM (UNUSED) AS LOT 334)
223 LOT, (8) ASSORTED BORING HEADS 235 55" RODEC TOOL POST CHANGING BENCH
Ne Ne
224 LOT, (9) ASSORTED BORING HEADS 236 55" CAT40 TOOL POST CHANGING BENCH
Ne Ne
225 LOT, (8) ASSORTED BORING HEADS 237 6' CAT40 TOOL POST CHANGING BENCH
Ne Ne
226 3" 3-JAW CHUCK BORING ATTACHMENT 238 55" CAT40 TOOL POST CHANGING BENCH
Ne Ne
227 LOT, (2) ANGLED BORING CUTTERS 239 6' CAT40 TOOL POST CHANGING BENCH
Ne MOUNTED Ne
ON CAT40
240 55" CAT40 TOOL POST CHANGING BENCH
TOOL HOLDERS Ne
241 HAAS
228 LOT, ASSORTED CAT40 TOOL HOLDERS (MAY Ne
Ne NEED 4TH AXIS W/HAAS CONTROL PANEL MOUNTED ON
STAND
REPAIRS, LOCATED UNDER BENCH)
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 14
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
242 HAAS HTS9 252 LOT, ASSORTED END MILLS AND/OR DRILL
Ne Ne BITS
9" MANUAL TAIL STOCK IN THIS
DRAWER (UNUSED, DRAWER 7)
243 ENCO
Ne 253 LOT, ASSORTED END MILLS AND/OR DRILL
29"W 4-DRAWER TOOLBOX ON CASTERS Ne BITS
IN THIS
DRAWER (UNUSED, DRAWER 8)
244 LOT, ASSORTED ALUMINUM SET UP PLATES
Ne (LOCATED
254 LISTA
BEHIND LOT 22, TOYODA) Ne
28"W X 59-1/2"H 14-DRAWER TOOL CHEST
245 LOT, ASSORTED PLATE BARS & PRY BARS
Ne 255 LOT, ASSORTED TAPS W/HUOT 5-DRAWER
Ne COUNTERTOP
246 LOT, ASSORTED END MILLS AND/OR DRILL
Ne BITS
IN THIS METAL CABINET
DRAWER (UNUSED, DRAWER 1)
256 LOT, ASSORTED DRILL BITS W/HUOT
Ne 5-DRAWER
247 LOT, ASSORTED END MILLS AND/OR DRILL
Ne BITS
IN THIS COUNTERTOP METAL CABINET
DRAWER (UNUSED, DRAWER 2)
257 LOT, ASSORTED DRILL BITS W/(2)
Ne PLASTIC COUNTERTOP
248 LOT, ASSORTED END MILLS AND/OR DRILL
Ne BITS BINS
IN THIS
DRAWER (UNUSED, DRAWER 3) 258 LOT, ASSORTED LONG LARGE COLLETS
Ne W/HOLDER
249 LOT, ASSORTED END MILLS AND/OR DRILL
Ne BITS 259 LOT, ASSORTED LARGE COLLETS W/HOLDER
IN THIS Ne
DRAWER (UNUSED, DRAWER 4)
260 LOT, ASSORTED LARGE COLLETS W/HOLDER
Ne
250 LOT, ASSORTED END MILLS AND/OR DRILL 261 LOT, ASSORTED SIZES OF COLLETS
Ne BITS Ne W/HOLDER
IN THIS
DRAWER (UNUSED, DRAWER 5)
262 LOT, ASSORTED SMALL COLLETS W/HOLDER
Ne
251 LOT, ASSORTED END MILLS AND/OR DRILL
Ne BITS 263 LOT, ASSORTED STRAIGHT COLLETS
IN THIS Ne W/HOLDER
DRAWER (UNUSED, DRAWER 6)
265 LOT, ASSORTED MINI END MILLS
Ne
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 15
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
266 LOT, ASSORTED MINI END MILLS 285A LOT, ASSORTED END MILLS
Ne Ne
267 LOT, ASSORTED MINI END MILLS 285B LOT, ASSORTED END MILLS
Ne Ne
268 LOT, ASSORTED MINI END MILLS 286 LOT, ASSORTED TAPERED END MILLS
Ne Ne
269 LOT, ASSORTED MINI END MILLS 287 LOT, ASSORTED BALL NOSE END MILLS
Ne Ne
270 LOT, ASSORTED MINI END MILLS 288 LOT, ASSORTED SMALL END MILLS & DRILL
Ne (ALUMINUM ONLY) Ne BITS
271 LOT, ASSORTED MINI END MILLS 289 LOT, ASSORTED DOUBLE END MILLS
Ne (ALUMINUM ONLY) Ne
290 LOT, DOUBLE END TAP & DIES
272 LOT, ASSORTED BALL NOSE END MILLS Ne
Ne (ALUMINUM ONLY)
291A LOT, APT 300-S-10
Ne
273 LOT, ASSORTED BALL NOSE END MILLS COUNTER BORE SET W/CASE
Ne (ALUMINUM ONLY)
291B LOT, ASSORTED COUNTER BORES
274 LOT, ASSORTED END MILLS (PLASTIC ONLY) Ne
Ne
291C LOT, ASSORTED COUNTER BORES
275 LOT, ASSORTED END MILLS Ne
Ne
291D LOT, ASSORTED COUNTER BORES
276 LOT, ASSORTED END MILLS Ne
Ne
291E LOT , ASSORTED COUNTER SINKS
277 LOT, ASSORTED END MILLS Ne
Ne
291F LOT, ASSORTED CUTTER TOOLING
278 LOT, ASSORTED END MILLS Ne
Ne
291G LOT, ASSORTED CUTTER TOOLING
279 LOT, ASSORTED END MILLS Ne
Ne
292 LOT, ASSORTED TAPS
280 LOT, ASSORTED END MILLS Ne
Ne
293 LOT, ASSORTED METRIC TAPS
281 LOT, ASSORTED END MILLS Ne
Ne
294 LOT, ASSORTED TAPS
282 LOT, ASSORTED END MILLS Ne
Ne
295 LOT, ASSORTED TAPS
283 LOT, ASSORTED END MILLS Ne
Ne
296 LOT, ASSORTED TAPS
284 LOT, ASSORTED END MILLS Ne
Ne
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 16
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
297 LOT, ASSORTED TAPS 312C LOT, ASSORTED KEYSEAT CUTTERS
Ne Ne
298A LOT, ASSORTED TAP ADAPTERS 312D LOT, ASSORTED KEYSEAT CUTTERS
Ne Ne
298B RIDGID SUPREME 6300 313 LOT, ASSORTED KEYSEAT & CONVEX
Ne Ne CUTTERS
VERSA-TAPER, #10 THRU 1/2" W/CASE
314 BENR DCM 0433-346-063A-8D
298C MITEE-BIT TSN-625 Ne
Ne INDEXIBLE DRILLING BODY
CLAMPING KIT
315 LOT, INGERSOLL SELF-CENTERING DRILL
299 LOT, ASSORTED ADJUSTABLE REAMERS Ne BITS &
Ne ASSORTED REPLACEMENT TIPS
300 LOT, ASSORTED REAMERS
Ne 316 LOT, INGERSOLL CHIP SURFER CUTTER TIPS
Ne
301 LOT, ASSORTED REAMERS
Ne 317 LOT, ASSORTED 1/2" SHANK DRILL BITS
Ne
302 LOT, ASSORTED REAMERS
Ne 318 LOT, ASSORTED METRIC DRILL BITS
Ne
303 LOT, ASSORTED REAMERS
Ne 319 LOT, RATIO BORE/SCREW MACHINE DRILL
Ne BITS
304 LOT, ASSORTED REAMERS
Ne
305 LOT, ASSORTED REAMERS 320 LOT, RATIO BORE/SCREW MACHINE DRILL
Ne Ne BITS
306 LOT, ASSORTED REAMERS
Ne 321 LOT, ASSORTED DRILL BITS
Ne
307 LOT, ASSORTED REAMERS
Ne 322 LOT, ASSORTED DRILL BITS
Ne
308 LOT, ASSORTED REAMERS
Ne 323 LOT, ASSORTED DRILL BITS
Ne
309 LOT, ASSORTED REAMERS
Ne 324 LOT, ASSORTED DRILL BITS
Ne
310 LOT, ASSORTED REAMERS
Ne 325 LOT, ASSORTED DRILL BITS
Ne
311 LOT, ASSORTED REAMING PORTING TOOLS
Ne 326 LOT, ASSORTED DRILL BITS
Ne
312A LOT, ASSORTED REAMING PORTING TOOLS
Ne 327 LOT, ASSORTED BLANKS
Ne
312B LOT, ASSORTED KEYSEAT CUTTERS
Ne 328 LOT, ASSORTED 3-1/2" DIAMOND TIP
Ne CUTTER WHEELS
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 17
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
329 LOT, HARDINGE S-30 SMOOTH & HEX
Ne SERRATED COLLET 340 BALDOR
PADS Ne
3 HP/3,450 RPM MOTOR, 208-230/460V, 3 PHASE
330 LOT, ASSORTED DULL & RESHARPENED (BACKUP MOTOR FOR CIRCULATION PUMP LOT 38)
Ne DRILL
BITS ON 341 SYSTEM 3R
LEFT SIDE OF BENCH (BENCH SOLD SEPERATELY Ne
AS LOT 234) EDM HEAD (FITS ON LOT 42 CHARMILLES ISOPULSE
TYPE P25)
331 LOT, ASSORTED DULL DRILL BITS IN THIS
Ne BUCKET ON 342 RENISHAW L41471
FLOOR Ne
TOUCH PROBE MOUNTED ON SYSTEM 3R HOLDER
332 LOT, ASSORTED T-SLOT SET UP TOOLING & DRAW BAR
Ne W/CART
343 RENISHAW M13017
333 LOT, ASSORTED T-SLOT SETUP TOOLING Ne
Ne W/CART TOUCH PROBE MOUNTED ON SYSTEM 3R HOLDER
& DRAW BAR
334 KENNEDY
Ne 344 SOLID BALL PROBE MOUNTED ON SYSTEM
27-1/2"W 6-DRAWER UNDERCOUNTER TOOL CHEST Ne 3R
HOLDER &
MODIFIED BASE
335 LISTA
Ne
6' WOOD TOP WORKBENCH W/8-DRAWER 345 LOT, (10) 3R COMPATIBLE EDM ELECTRODE
UNDERCOUNTER TOOL CHEST & T-SLOT SET UP Ne HOLDERS &
TOOLING DRAW BAR
336 LISTA 346 LOT, (10) 3R COMPATIBLE EDM ELECTRODE
Ne Ne HOLDERS
28-1/2" 5-DRAWER WOOD TOP TOOL CHEST
W/T-SLOT SET UP TOOLING 347 LOT, (10) 3R COMPATIBLE EDM ELECTRODE
Ne HOLDERS
337 LISTA
Ne 348 LOT, (10) 3R COMPATIBLE EDM ELECTRODE
28-1/2" 4-DRAWER WOOD TOP TOOL CHEST Ne HOLDERS
338 LISTA 349 LOT, (10) 3R COMPATIBLE EDM ELECTRODE
Ne Ne HOLDERS
28" 5-DRAWER WOOD TOP TOOL CHEST
350 LOT, (10) 3R COMPATIBLE EDM ELECTRODE
339 LISTA Ne HOLDERS
Ne
5' X 8' DOUBLE PANEL WOOD TOP WORKBENCH
W/6-DRAWER UNDERCOUNTER TOOL BENCH &
2-DOOR UNDERCOUNTER CABINET
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 18
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
351 LOT, (10) 3R COMPATIBLE EDM ELECTRODE 364 LOT, (3) 3R COMPATIBLE MANUAL MACRO
Ne HOLDERS Ne CHUCKS
352 LOT, (10) 3R COMPATIBLE EDM ELECTRODE 365 LOT, (3) 3R COMPATIBLE MANUAL MACRO
Ne HOLDERS Ne CHUCKS
353 LOT, (10) 3R COMPATIBLE EDM ELECTRODE 366 LOT, (3) 3R COMPATIBLE MANUAL MACRO
Ne HOLDERS Ne CHUCKS
354 LOT, (10) 3R COMPATIBLE EDM ELECTRODE 367 LOT, (3) 3R COMPATIBLE MANUAL MACRO
Ne HOLDERS Ne CHUCKS
355 LOT, (10) 3R COMPATIBLE EDM ELECTRODE 368 LOT, (3) 3R COMPATIBLE MANUAL MACRO
Ne HOLDERS Ne CHUCKS
356 LOT, (10) 3R COMPATIBLE EDM ELECTRODE 369 LOT, (3) 3R COMPATIBLE MANUAL MACRO
Ne HOLDERS Ne CHUCKS
357 LOT, (10) 3R COMPATIBLE EDM ELECTRODE 370 LOT, (3) 3R COMPATIBLE MANUAL MACRO
Ne HOLDERS Ne CHUCKS
358 LOT, (10) 3R COMPATIBLE EDM ELECTRODE 371 LOT, (3) 3R COMPATIBLE MANUAL MACRO
Ne HOLDERS Ne CHUCKS
359 LOT, (22) 3R COMPATIBLE EDM ELECTRODE 372 LOT, ASSORTED 3R COMPATIBLE TOOLING
Ne HOLDERS Ne
373 SYSTEM 3R 3R-314.2
(MAY NEED REPAIR) Ne
MINI CONTROL RULE
360 LOT, (2) SYSTEM 3R MINI BLOCKS
Ne
374 SYSTEM 3R 3R-606.1
361 SYSTEM 3R Ne
Ne CONTROL RULER
90-DEGREE MACRO CHUCK ADAPTER
375 SYSTEM 3R 3R-606.1
362 SYSTEM 3R Ne
Ne CONTROL RULER
MAGNETIC MACRO CHUCK MOUNTED IN
CUSTOMIZED HOLDER
376 SYSTEM 3R 3R-606.1
Ne
363 LOT, (5) SYSTEM 3R MANUAL MACRO MACRO MASTER ROD
Ne CHUCKS
377 SYSTEM 3R 3R-656.1
Ne
MACRO MASTER
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 19
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
378 SYSTEM 3R 388 PAIR OF 6" X 6" X 8" PARALLEL BLOCKS
Ne Ne W/3-R
HOLDER CHANGE TOOLING KIT W/CASE
COMPATIBLE MACRO BLOCKS, MOUNTED
379 PONAM
Ne 389 PAIR OF 3R COMPATIBLE 90-DEGREE 6"
2.000" DIA MASTER RING GAGE MOUNTED ON Ne GRAPHITE
MACRO HOLDER
HOLDERS
380 LOT, 3R COMPATIBLE EDM MACRO
Ne HOLDERS, PLATING 390 LISTA
Ne
SURFACES & DRAW BARS IN THIS SECTION 5-DRAWER WOOD TOP TOOL CHEST W/3R
COMPATIBLE HARDWARE & ACCESSORIES
381 LOT, 3R COMPATIBLE EDM MACRO
Ne HOLDERS, PLATING 391 LOT, ASSORTED EDM ORBIT TAPS & MINI
Ne RDO
SURFACES & DRAW BARS IN THIS SECTION
392 LOT, APPROX (250) 3R-COMPATIBLE SHANKS
382 LOT, 3R COMPATIBLE EDM MACRO Ne
Ne HOLDERS, PLATING
393 LOT, APPROX (250) 3R-COMPATIBLE SHANKS
Ne
SURFACES & DRAW BARS IN THIS SECTION
394 LOT, 3R-COMPATIBLE SHANKS ON THIS
Ne SHELF (LOCATED
383 LOT, 3R COMPATIBLE EDM MACRO IN LOFT)
Ne HOLDERS, PLATING
SURFACES & DRAW BARS IN THIS SECTION 395 LOT, 3R-COMPATIBLE SHANKS ON THIS
Ne SHELF (LOCATED
IN LOFT)
384 LOT, 3R COMPATIBLE EDM MACRO
Ne HOLDERS, PLATING
396 LOT, 3R-COMPATIBLE SHANKS ON THIS
SURFACES & DRAW BARS IN THIS SECTION Ne SHELF (LOCATED
IN LOFT)
385 LOT, ASSORTED 3R-COMPATIBLE PLATES &
Ne FIXTURES 397 LOT, 3R-COMPATIBLE SHANKS ON THIS
Ne SHELF (LOCATED
IN LOFT)
386 6" X 6" 3R-COMPATIBLE MACRO VACUUM
Ne PLATE
398 LOT, 3R-COMPATIBLE SHANKS ON THIS
Ne SHELF (LOCATED
387 3-1/2" X 6" ADJUSTABLE SINE PLATE IN LOFT)
Ne W/MOUNTED 3-R
COMPATIBLE MACRO CHUCK
399 LOT, 3R-COMPATIBLE SHANKS ON THIS
Ne SHELF (LOCATED
IN LOFT)
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 20
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
400 LOT, ASSORTED GRAPHITE W/3-R 412 GRAPHITE W/2-DOOR METAL CABINET
Ne COMPATIBLE TOOLING Ne (LOCATED UNDER
AFFIXED TO GRAPHITE ON THESE (2) SHELVING LOFT)
SECTIONS (IN LOFT)
415 BORING HEAD (FOR BRIDGEPORTS LOTS
401 LOT, ASSORTED BUSHINGS & HARDWARE ON Ne 33-35)
Ne THIS
416 BORING HEAD (FOR BRIDGEPORTS LOTS
SHELVING SECTION (IN LOFT) Ne 33-35)
402 LOT, APPROX (6-1/2) 39"X39" SHEETS OF 417 LOT, ASSORTED MILLING TOOLING
Ne FOAM BACKED Ne
WITH STAINLESS STEEL (IN LOFT)
418 LOT, MILLING MACHINE COLLETS
Ne
406 LOT, ASSORTED 3R-COMPATIBLE HOLDERS,
Ne PLATES, 419 LOT, MILLING MACHINE COLLETS
Ne
CHUCK FIXTURES & SHELVING UNIT 420 LOT, ASSORTED MILLING TOOLING ON THIS
Ne SHELF
407 LOT, ASSORTED EDM ACCESSORIES ON THIS
Ne SHELVING 421 SANDVIK CA-TRE-OK60A
Ne
UNIT (SHELVING NOT INCLUDED) INDEXABLES CLAMP (FOR OKUMA LB3000EX II)
408 LOT, ASSORTED EDM ACCESSORIES ON THIS 422 COROMAT 410505059-60
Ne SHELVING Ne
1-STEP VDI TURRET CNC 90 LIVE TOOLING (FOR
UNIT (SHELVING NOT INCLUDED) OKUMA LB3000EX II)
409 LOT, ASSORTED EDM ACCESSORIES & 3R 423 COROMAT 410505059-60
Ne COMPATIBLE Ne
1-STEP VDI TURRET CNC 90 LIVE TOOLING (FOR
FIXTURES W/GRAPHITE (SHELVING NOT OKUMA LB3000EX II)
INCLUDED)
424 VELOCITY SU-MATIC 14910002090
410 LOT, ASSORTED 3R COMPATIBLE FIXTURES Ne
Ne W/GRAPHITE TURRET TYPE V12 BORING BAR HOLDER (FOR
OKUMA LB3000EX II)
(SHELVING NOT INCLUDED)
425 VELOCITY SU-MATIC 14910002310
411 LOT, USED GRAPHITE THAT CAN BE RE-CUT Ne
Ne & TURRET TYPE V12 BORING BAR HOLDER (FOR
REUSED ON OKUMA LB3000EX II)
THESE (3) SHELVING UNITS W/SHELVING
426 VELOCITY SU-MATIC 14910002310
Ne
TURRET TYPE V12 BORING BAR HOLDER (FOR
OKUMA LB3000EX II)
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 21
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
435B 12" 3-JAW CHUCK (FITS SWI TRL 2470SX,
427 VELOCITY SU-MATIC 14910003760 Ne LOT 46)
Ne
TURRET TYPE V12 BORING BAR HOLDER (FOR 436 LOT, HARDINGE 3J LATHE COLLETS
OKUMA LB3000EX II) Ne W/HOLDER
(FITS 46)
428 VELOCITY SU-MATIC 14910002080-A
Ne 437 PORTABLE TAIL STOCK W/20" SLIDING BASE
1" TURRET TYPE V12 BORING BAR HOLDER (FOR Ne
OKUMA LB3000EX II)
438 YUASA INT'L
Ne
429 VELOCITY SU-MATIC 14910002080-A DRILL CLAMP ATTACHMENT
Ne
1" TURRET TYPE V12 BORING BAR HOLDER (FOR
OKUMA LB3000EX II) 439 CENTERLINE HEIGHT TOOL (CAN USE W/LOT
Ne 46)
430 VELOCITY SU-MATIC 14910002230
Ne 440 LOT, (3) TOOL POST HOLDERS (FITS ON
Ne LOT 46)
1-1/2" TURRET TYPE V12 BORING BAR HOLDER (FOR
OKUMA LB3000EX II)
441 LOT, (3) TOOL POST HOLDERS (FITS ON
Ne LOT 46)
431 VELOCITY SU-MATIC 14910002230
Ne
1-1/2" TURRET TYPE V12 BORING BAR HOLDER (FOR 442 LOT, (3) TOOL POST HOLDERS (FITS ON
OKUMA LB3000EX II) Ne LOT 46)
432 VELOCITY SU-MATIC 14910002230 443 LOT, (3) TOOL POST HOLDERS (FITS ON
Ne Ne LOT 46)
1-1/2" TURRET TYPE V12 BORING BAR HOLDER (FOR
OKUMA LB3000EX II) 444 LOT, (4) TOOL POST HOLDERS (FITS ON
Ne LOT 46)
433 VELOCITY SU-MATIC 149100002472
Ne 445 STAR
2" TURRET TYPE V12 BORING BAR HOLDER (FOR Ne
OKUMA LB3000EX II) AUTOMATIC TOOL POST HOLDER
434 2020 VELOCITY SU-MATIC LLU-60-1-R 446 DORIAN SDN35CXA
Ne (14101002700) Ne
WEDGE LOCK TOOL POST W/(3) TOOL POST
6,000 RPM TURRET TYPE V12 SPINDLE BASE HOLDERS
ATTACHMENT (FOR OKUM LB3000EX II)
447 9-7/8" DIA CENTER MOUNTING PLATE (FITS
435A 12-1/2" 4-JAW CHUCK (FITS SWI TRL 2470SX, Ne LOT 47)
Ne LOT 46)
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 22
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
448 LOT, ASSORTED 5C LATHE COLLETS 459 LOT, (2) DEAD CENTERS & ADAPTERS
Ne W/HOLDER Ne
(FITS LOT
460 LOT, (2) DEAD CENTERS & ADAPTERS
47) Ne
461 LOT, (3) SMALL DEAD CENTERS & (3)
449 LOT, ASSORTED HARD JAWS FOR 3-JAW Ne ASSORTED
Ne CHUCKS
ON THIS ADAPTERS
SHELF
462 LOT, (4) SMALL DEAD CENTERS
450 LOT, ASSORTED HARD & SOFT JAWS FOR Ne
Ne 3-JAW CHUCKS
ON THIS SHELF 463 LOT, (2) ADJUSTABLE DRILL BIT HOLDERS
Ne
451 LOT, ASSORTED CIRCULAR SOFT JAWS FOR 464 LOT, GLOBAL CNC REDUCER BUSHING TOOL
Ne 3-JAW CHUCKS Ne HOLDER
ON THIS SHELF
SLEEVES
452 LOT, ASSORTED SOFT JAWS FOR 3-JAW
Ne CHUCKS 465 LOT, MANDREL COLLETS
ON THIS Ne
SHELF 466 DORIAN CNCKH-1-2
Ne
453 LOT, ASSORTED SOFT JAWS FOR 3-JAW DIAMOND PATTERN KNURLING HOLDER
Ne CHUCKS W/INSERTS
ON THIS
SHELF 467 LOT, ASSORTED GUNDRILLS
Ne
454 LOT, ASSORTED SOFT JAWS FOR 3-JAW 468 LOT, (3) SANDVIK COROMANT MODULAR
Ne CHUCKS Ne GROOVING
ON THIS
SHELF CUTTING HEADS W/REPLACEMENT INSERTS (2
COROTURN 107 & COROTURN HP)
455 HOLDRIDGE 4-D
Ne 469 LOT, (3) LARGE BORING BARS
RADII CUTTER W/CASE Ne
470 LOT, (5) ASSORTED BORING BARS
456 LOT, ASSORTED SHANK COLLET EXTENSION Ne
Ne W/COLLETS
471 LOT, ASSORTED BORING BARS
Ne
457 LOT, (2) LIVE CENTERS
472 LOT, ASSORTED BORING BARS
Ne
Ne
458 LOT, (2) LIVE CENTERS
473 LOT, ASSORTED BORING BARS
Ne
Ne
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 23
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
474 LOT, ASSORTED BORING BARS 493 LOT, ASSORTED BORING/TURNING INSERTS
Ne Ne
475 LOT, ASSORTED BORING BARS 494 LOT, ASSORTED BORING/TURNING INSERTS
Ne Ne
476 LOT, ASSORTED BORING BARS 495 US GENERAL
Ne Ne
42"W 13-DRAWER TOOL CHEST ON CASTERS
477 TUNGALOY TDXU-1812FS-05 (6718603)
Ne
BORING BAR 496 LISTA
Ne
8' WOOD TOP WORKBENCH W/46" 5-DRAWER
478 LOT, ASSORTED SHANK LATHE TOOL
Ne HOLDER UNDERCOUNTER TOOL CHEST
479 LOT, ASSORTED SHANK LATHE TOOL 498 LOT, ASSORTED THREAD GAGES
Ne HOLDER Ne
499 LOT, ASSORTED THREAD GAGES
Ne
480 LOT, ASSORTED SHANK LATHE TOOL
Ne HOLDER 500 LOT, (5) RING SETS
Ne
481 LOT, ASSORTED BORING BARS 501 LOT, ASSORTED THREAD PLUG GAGES
Ne Ne
482 LOT, ASSORTED BORING BARS 502 LOT, ASSORTED THREAD PLUG GAGES
Ne Ne
483 LOT, ASSORTED BORE BAR HOLDERS 503 LOT, ASSORTED THREAD PLUG GAGES
Ne Ne
484 BORING RING 504 LOT, ASSORTED THREAD PLUG GAGES
Ne Ne
485 LOT, ASSORTED BORING/TURNING INSERTS 505 LOT, ASSORTED THREAD PLUG GAGES
Ne Ne
486 LOT, ASSORTED BORING/TURNING INSERTS 506 LOT, ASSORTED THREAD PLUG GAGES
Ne Ne
487 LOT, ASSORTED BORING/TURNING INSERTS 507 LOT, ASSORTED THREAD PLUG GAGES
Ne Ne
488 LOT, ASSORTED BORING/TURNING INSERTS 508 LOT, ASSORTED SINGLE SIDE TOOL THREAD
Ne Ne PLUG GAGES
489 LOT, ASSORTED BORING/TURNING INSERTS
Ne 509 LOT, ASSORTED CUSTOM THREAD PLUG
Ne GAGES
490 LOT, ASSORTED BORING/TURNING INSERTS
Ne
491 LOT, ASSORTED BORING/TURNING INSERTS 510 LOT, DELTRONIC PINS W/2-DOOR METAL
Ne Ne CABINET
& (2)
492 LOT, ASSORTED BORING/TURNING INSERTS PINS CABINETS ON TOP
Ne
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 24
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
511 LOT, DELTRONIC CLASS-X STANDARDS 524 IMPERIAL NEWBOULD
Ne W/2-DOOR METAL Ne
CABINET GRINDIT W/CASE
512 MOORE TOOLS 525 IMPERIAL NEWBOULD
Ne Ne
HIGH SPEED SPINDLE/GRINDING HEAD GRINDIT W/CASE
513 MOORE TOOLS 526 J & S
Ne Ne
HIGH SPEED SPINDLE/GRINDING HEAD WHEEL DRESSER W/CASE
514 MOORE TOOLS 527 TYPE 225-102 RADIUS DRESSER W/CASE
Ne Ne
HIGH SPEED SPINDLE/GRINDING HEAD
528A WALKER INTERLOC
Ne
515 MOORE TOOLS 16" X 32" MAGNETIC CHUCK
Ne
HIGH SPEED SPINDLE/GRINDING HEAD
528B WALKER
Ne
516 MOORE TOOLS 6" X 12" MAGNETIC CHUCK W/SCV-1.5 CONTROLS,
Ne 120V
HIGH SPEED SPINDLE/GRINDING HEAD
529 12" X 18" MAGNETIC CHUCK
517 MOORE TOOLS Ne
Ne
530 5" X 10" MAGNETIC CHUCK
AUTO SWITCH Ne
531 5" X 10" MAGNETIC CHUCK
518 LOT, ASSORTED TOOLING ON THIS SHELF Ne
Ne
532 8" X 19-1/2" MAGNETIC CHUCK
519 LOT, ASSORTED TOOLING ON THIS SHELF Ne
Ne
533 6" X 12" ADJUSTABLE ANGLE MAGNETIC
520 FANUC A068-6081-H103 Ne CHUCK
Ne
POWER SUPPLY MODULE, 200-230V, 3 PHASE
(REBUILT FOR FORMER 776G GRINDER) 534 ATCO
Ne
PAIR OF MATCHED 6" X 6" ADJUSTABLE ANGLE
521 PUNCH MATE #1 W/CASE MAGNETIC CHUCKS
Ne
522 HARIG #1 535 ATCO
Ne Ne
3.000 CENTER HEIGHT GRIND ALL W/CASE PAIR OF MATCHED 6" X 6" ADJUSTABLE ANGLE
MAGNETIC CHUCKS
523 HARIG #1
Ne
3.000 CENTER HEIGHT GRIND ALL W/CASE
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 25
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
536 ATCO 549 3" X 6" ADJUSTABLE HEIGHT SINE PLATE
Ne Ne
6" X 6" ADJUSTABLE HEIGHT MAGNETIC CHUCK
550 3" X 6" ADJUSTABLE HEIGHT SINE PLATE
Ne
537 ATCO 551 6" X 6" ADJUSTABLE HEIGHT SINE PLATE
Ne Ne
6" X 6" ADJUSTABLE HEIGHT MAGNETIC CHUCK
552 12" X 12" TWO-PLANES ADJUSTABLE HEIGHT
Ne SINE PLATE
538 ATCO
Ne
6" X 6" ADJUSTABLE HEIGHT MAGNETIC CHUCK 553 12" X 12" SINE PLATE
Ne
539 ATCO 554 48"W HEAVY DUTY 2-DOOR METAL CABINET
Ne Ne W/TOOLING
6" X 6" ADJUSTABLE HEIGHT MAGNETIC CHUCK
ACCESSORIES
540 ATCO
Ne 555 LOT, ASSORTED CORE PINS, QUILL PUNCHES
6" X 6" ADJUSTABLE HEIGHT MAGNETIC CHUCK Ne & MISC
TOOLING W/2-DOOR METAL CABINET
541 ATCO
Ne 556 LOT, ASSORTED EJECTOR PINS & MISC
6" X 6" ADJUSTABLE HEIGHT MAGNETIC CHUCK Ne TOOLING
W/2-DOOR METAL CABINET
542 6" X 6" ADJUSTABLE HEIGHT MAGNETIC
Ne CHUCK
557 LOT, UNUSED GRINDING WHEELS W/2-DOOR
Ne METAL
543 6" X 6" ADJUSTABLE HEIGHT MAGNETIC
Ne CHUCK CABINET
544 SUBURBAN TOOL 558 LOT, ASSORTED (USED) LARGE GRINDING
Ne Ne WHEELS
6" X 6" ADJUSTABLE HEIGHT MAGNETIC CHUCK & MISC
(USED) W/2-DOOR METAL CABINET
545 6" X 6" ADJUSTABLE HEIGHT MAGNETIC
Ne CHUCK
559 LOT, ASSORTED (USED) LARGE GRINDING
Ne WHEELS (USED)
546 6" X 6" MAGNETIC CHUCK W/2-DOOR WOOD CABINET
Ne
547 6" X 6" MAGNETIC CHUCK W/CASE 560 LOT, ASSORTED (USED) GRINDING WHEELS
Ne Ne W/2-DOOR
548 3" X 6" ADJUSTABLE HEIGHT SINE PLATE
Ne WOOD CABINET
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 26
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
561 LOT, ASSORTED USED GRINDING WHEELS 571 2013 WENZEL LH87
Ne ON Ne
THIS WOOD CMM W/APPROX 41" X 89-1/2"L GRANITE WORK
CARRIER SURFACE, RENISHAW PH20 PROBE HEAD,
RENISHAW PROBES, RENISHAW MCU5 JOYSTICK,
CPU W/(2) MONITORS, 4' TABLE ON CASTERS, 1
562 LOT, ASSORTED USED GRINDING WHEELS
Ne ON KAESER WALL MOUNTED AIR DRYER &
THIS WOOD ACCESSORIES, 120V (WILL REQUIRE A RIGGER TO
CARRIER MOVE)
SERIAL NUMBER: 137569
563 LOT, ASSORTED USED GRINDING WHEELS
Ne ON 572 RENISHAW
THIS WOOD Ne
CARRIER PROBE ACCESSORIES W/WOOD CASE
564 LOT, ASSORTED USED GRINDING WHEELS 573 RENISHAW M2
Ne ON Ne
THIS WOOD PROBE STYLI W/WOOD CASE
CARRIER
574 RENISHAW
Ne
565 LOT, ASSORTED USED GRINDING WHEELS
Ne ON PROBE EXTENSIONS W/WOOD CASE
THIS WOOD
CARRIER 575 VACUUM & PRESSURE TEST EQUIPMENT
Ne W/CASE
566 LOT, ASSORTED USED GRINDING WHEELS
Ne ON 576 HEXAGON ROMER RA-7525
THIS WOOD Ne
CARRIER PORTABLE ABSOLUTE ARM CMM W/ACER LAPTOP,
(3) INTERCHANGEABLE HEADS, ACCESSORIES &
CASE
567 LOT, ASSORTED USED GRINDING WHEELS
Ne ON SERIAL NUMBER: 7525-0813-UC
THIS WOOD
CARRIER 577 36" X 48" X 8" GRANITE SURFACE BLOCK
Ne W/METAL
568 LOT, ASSORTED USED GRINDING WHEELS
Ne ON STAND
THIS WOOD
CARRIER 578 KENNEDY VERSA BENCH
Ne
10-DRAWER TOOL CHEST W/STARRETT 24" X 36" X
569 LOT, (14) ASSORTED USED GRINDING
Ne WHEELS W/CENTER 8-1/4" GRANITE SURFACE BLOCK & MISC CONTENTS
MACHINE ATTACHMENT IN CHEST
570 8" X 12" VACUUM CHUCK W/ACCESSORIES 579 DILLON 2T
Ne Ne
5,000 LB LOAD CELL W/CASE
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 27
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
580 KURT VERSATILE LOCK 3600V
Ne 596 70" METAL WORK TABLE
6" MACHINIST VISE Ne
597 PROTO 6013C
581 6" X 12" PIN SET UP PLATE Ne
Ne 1/2" DRIVE SAE 30 TO 150 FT LB TORQUE WRENCH
582 LOT, ASSORTED V-BLOCKS & (1) SET UP W/CASE
Ne BLOCK
598 PROTO 6066A
583 PAIR OF 2" X 4" X 16" PARALLELS Ne
Ne 3/8" DRIVE 1000 IN/LB TORQUE WRENCH W/CASE
584 PAIR OF 2" X 4" X 4" PIN BLOCKS (1 HAS A
Ne CHIP IN 599 CDI 150MRRH
CORNER) Ne
1/4" DRIVE 20-150 IN/LB TORQUE WRENCH W/CASE
585 SET OF (4) 1-2-3 MATCHED GROUND
Ne BLOCKS W/CASE 600 SPI 14-416-2
Ne
0.0002" STYLUS SURFACE ROUGHNESS GAGE
586 APPROX 2-1/2" X 5" X 2" L-SHAPED SINE W/CASE
Ne PLATE
W/CASE 601 SUNNEN CF-502
Ne
0-2" SETTING FIXTURE
587 6" X 6" ADJUSTABLE PRECISION SINE
Ne PLATE W/CASE
602 SUNNEN
Ne
588 LOT, ASSORTED PEE DEE THREAD 0.740-1.190" DIAL BORE GAGE W/CASE
Ne MEASURING WIRES
603 MITUTOYO
589 PAIR OF (2) VERTICAL ROD/BAR STANDS Ne
Ne
0.7"-4" DIAL BORE GAGE W/CASE
590 LOT, STARRETT RADIUS GAGES & WELD
Ne FILLED GAGE
604 MITUTOYO
Ne
591 LOT, ASSORTED THREAD PLUG GAGES 2"-6" DIAL BORE GAGE W/CASE
Ne
592 LOT, (3) 2.0000 RINGMASTERS 605 SUNNEN
Ne Ne
593 2-1/2" VISE 0.74-1.19" DIAL BORE GAGE W/CASE
Ne
594 SET OF LETTER & NUMBER STAMPS 606 SUNNEN
Ne Ne
0.495-0.75" DIAL BORE GAGE W/CASE
595 LISTA
Ne
7' WOOD TOP WORKBENCH W/4-DRAWER METAL
FILE CABINET
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 28
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
607 MITUTOYO ABSOLUTE NTD10PB-P20C 618 BROWN & SHARPE
Ne Ne
HOLE CENTER TO CENTER DIGITAL CALIPER 1-2" THREAD PITCH OUTSIDE MICROMETER W/CASE
W/CASE
619 ETALON 71-115900
608 MITUTOYO ABSOLUTE CD-12"CPW Ne
Ne 1-2" OUTSIDE MICROMETER W/CASE
12" DIGITAL CALIPER W/CASE
620 MITUTOYO
609 MAHR MARCAL 16EWR-200MM Ne
Ne 1-2" OUTSIDE MICROMETER W/CASE
8" DIGITAL CALIPER W/CASE
621 STARRETT
610 MAHR MARCAL 16EX-150MM Ne
Ne (12) OUTSIDE MICROMETER SET W/MIC RODS &
6" DIGITAL CALIPER W/CASE CASE (0-1, 1-2, 2-3, 3-4, 4-5, 5-6, 6-7, 7-8, 8-9, 9-10, 10-11,
11-12)
611 FOWLER SYLVAC ULTRA-CAL MARK III
Ne 622 MITUTOYO 2904F
6" DIGITAL CALIPER W/CASE Ne
0-1" DIAL DEPTH GAGE W/CASE
612 MITUTOYO 293-725-30
Ne 623 STARRETT 684
0-1" DIGITAL OUTSIDE MICROMETER W/CASE Ne
90-DEGREE - 127 DEGREE CHAMFER GAGE W/CASE
613 VIS
Ne 624 MEYER GAGES
0-1" DIAL OUTSIDE MICROMETER W/CASE Ne
0.11-.750 PIN GAGE SET W/CASE (.251 & .253 ARE
MISSING)
614 MITUTOYO 114-202
Ne
0.093-1" V-ANVIL OUTSIDE MICROMETER W/CASE 625 SET OF 0.040-0.500 AMERICAN STANDARD
Ne PIN GAGES
W/CASE (MISSING 0.043 PIN)
615 MITUTOYO 117-107
Ne
0-1" INTERCHANGEABLE ANVIL OUTSIDE 626 VERMONT GAGE
MICROMETER W/CASE Ne
0.011-0.060 PIN GAGE SET
616 SPI
Ne 627 LOT, ASSORTMENT OF INCOMPLETE BLOCK,
0-1" DEEP THROAT OUTSIDE MICROMETER W/CASE Ne PIN
& BALL
GAGE SETS ON THIS SHELF
617 BROWN & SHARPE
Ne
0-1" THREAD PITCH OUTSIDE MICROMETER W/CASE
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 29
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
628 MITUTOYO 187-904 640 TESATEST 20-125-1
Ne Ne
UNIVERSAL BEVEL PROTRACTOR W/CASE DIAL GAGE INDICATOR W/STAND, SPARE STAND &
CASE
629 BROWN & SHARPE 558
Ne 641 FOWLER
TRUE CYLINDRICAL SQUARE W/CASE Ne
HEIGHT GAGE ACCESSORIES
630 D-M-E MFK-1200
Ne 643 MITUTOYO TM 176-812A
MOLD FINISH COMPARISONS (SPI MOLD FINISH Ne
GUIDE COMPATIBLE) TOOL MAKER DIGITAL MICROSCOPE
W/TECHNIQUIP F01-150 150 WATT FIBRE OPTIC
ILLUMINATOR, 115V
631 FOWLER PEAK 52-664-609-0
Ne
POCKET OPTICAL COMPARATOR SET 644 STARRETT SIGMA HB400
Ne
COUNTERTOP OPTICAL COMPARATOR
632 SPI 30-695-1
Ne W/QUADRA-CHEK 2000 CONTROLS, 115V
SURFACE COMPARATOR SERIAL NUMBER: 4204
633 VAN KEUREN 2V 645 STARRETT SIGMA HB400
Ne Ne
1" OPTICAL FLAT W/CASE COUNTERTOP OPTICAL COMPARATOR
W/QUADRA-CHEK 2000 CONTROLS & CABINET
STAND, 110V (LOCATED NEAR MITSUI, LOT 59)
634 OAKION LOGGER PLUS SERIAL NUMBER: 4634
Ne
WIRELESS TRANSMITTER
646 STARRETT SIGMA HB400
Ne
635 CDI 401 SM-CD1 COUNTERTOP OPTICAL COMPARATOR
Ne W/QUADRA-CHEK 2000 CONTROLS & CABINET
MICRO-ADJUSTABLE TORQUE SCREWDRIVER STAND, 110V (LOCATED BEHIND CHARMILLES
ROBOFORM 400, LOT 38)
637 INSIZE SERIAL NUMBER: 3978
Ne
DIGITAL MICROSCOPE 647 SPI 31-842-8
Ne
638 MITUTOYO 515-311 HEIGHT MASTER ANALOG COMPARATOR W/SCREEN & LIGHT
Ne
0.2" - 12.2" X 0.5" BLOCK STEPS HEIGHT GAGE 648 MEIJI EMZ-TR
Ne
639 MITUTOYO STEREO MICROSCOPE W/TECHNIQUIP T-Q/F01-1 150
Ne WATT FIBER OPTIC ILLUMINATOR, STARRETT 18" X
0.0001-18" DIAL HEIGHT GAGE 24" X 4" GRANITE SURFACE SCOPE STAND &
CABINET, 115V
SERIAL NUMBER: 58680
**13% BUYERS PREMIUM ON ALL ITEMS**Page: 30
James G. Murphy Co.
WESTERN INDUSTRIAL TOOLING INC - ONLINE AUCTION 9/14/2021-9/21/2021
LOT # LOT #
649 MEIJI EMZ-TR 656 MITUTOYO 192-116
Ne Ne
STEREO MICROSCOPE W/TECHNIQUIP F01-150 150 0.001-12" DIAL HEIGHT GAGE
WATT FIBER OPTIC ILLUMINATOR, 18" X 24" X 3"
GRANITE SURFACE SCOPE STAND & BLOCK STAND,
657 MITUTOYO 192-116
115V Ne
SERIAL NUMBER: 71495 0.001-12" DIAL HEIGHT GAGE
650 MEIJI EMZ-TR 658 MITUTOYO 192-116
Ne Ne
STEREO MICROSCOPE W/TECHNIQUIP FOI-150 150 0.001-12" DIAL HEIGHT GAGE
WATT FIBER OPTIC ILLUMINATOR, METAL BASE
SCOPE STAND, 115V
SERIAL NUMBER: 91483 659 STARRETT DIGICHEK 258
Ne
12" HEIGHT GAGE
651 MEIJI EMZ SERIAL NUMBER: 7771
Ne
STEREO MICROSCOPE W/TECHNIQUIP FOI-150 150
WATT FIBER OPTIC ILLUMINATOR, 12" X 12" X 3" 660 STARRETT DIGICHEK 258
GRANITE SURFACE SCOPE STAND, 115V Ne
SERIAL NUMBER: 29218 12" HEIGHT GAGE
SERIAL NUMBER: 8448
652A LIGHTS BY RYAN LS-150
Ne 661 STARRETT DIGICHEK 258
FIBER OPTIC ILLUMINATOR, 120V Ne
12" HEIGHT GAGE
SERIAL NUMBER: 8091
652B LIGHTS BY RYAN LS-150
Ne
FIBER OPTIC ILLUMINATOR, 120V 662 MITUTOYO 515-355 HEIGHT MASTER
Ne
12" DIGITAL BLOCK HEIGHT GAGE
653 MITUTOYO LH-600 SERIAL NUMBER: 620139
Ne
DIGITAL LINEAR HEIGHT GAGE W/MITUTOYO
QM-DATA 100 CONTROLS, ACCESSORIES & 663 MITUTOYO 515-311 HEIGHT MASTER
KENNEDY 4-DRAWER COUNTERTOP TOOL CHEST Ne
(GRANITE SURFACE BLOCK SOLD SEPARATELY) 12" X 0.5" BLOCK STEP HEIGHT GAGE
SERIAL NUMBER: 630181
654 MITUTOYO 192-114
Ne 664 MITUTOYO 515-311 HEIGHT MASTER
0.001-24" DIAL HEIGHT GAGE Ne
12" X 0.5" BLOCK STEP HEIGHT GAGE
SERIAL NUMBER: 630217
655 MITUTOYO 192-116
Ne
0.001-12" DIAL HEIGHT GAGE 665 MITUTOYO 515-311 HEIGHT MASTER
Ne
12" X 0.5" BLOCK STEP HEIGHT GAGE
SERIAL NUMBER: 930004
**13% BUYERS PREMIUM ON ALL ITEMS**You can also read
