MAGNUM Sliding Window - Series 601 - Photo courtesy of David Reid Homes. Windows supplied by Lifestyle Windows - Architectural Window Systems
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
DESIGNER SERIES
S er i es 601
M AG N U M ™ S l i d i n g Wi n d ow
Photo courtesy of David Reid Homes. Windows supplied by Lifestyle Windows.
DAT E : FE B R ARY 2 0 2 1 | R E P L AC E S : N OV E M BE R 2 0 0 9
DESIGNER SERIES
Se r ies 6 0 1 DATE: FEB 21
REPLACES: NOV 09
M AGN U M ™ S lidin g Wi n d ow SCALE: NOT TO SCALE
KEY FEATURES / PERFORMANCE CHARACTERISTICS
• Tested for compliance with the relevant Australian Standards and
achieved a very high water resistance of 450Pa, making the product
suitable for most applications including multi-storey apartments.
• Very low air infiltration, makes the product suitable for air
conditioned buildings.
• The extra strong meeting stiles allow large sliding windows to be
fabricated in high wind load areas.
• Clean splayed and rounded lines for improved visual appearance.
• Frame, mullion and transom have a soft 2mm internal radius.
• Opening sashes can be fitted with surface or mortice deadlocks.
• Sashes run on large diameter, heavy duty wheel carriages, including
double bogey for very heavy sashes.
Series 601 Sliding window
internal view
Maximum Panel Height* 1946mm
© Architectural Window Systems Pty Ltd 2002-2021
Maximum Panel Width* 1356mm
Maximum Glass Thickness ≤ 20mm
* Subject to individual site conditions and wind loads. Contact AWS Technical Support for
more information, e-mail techsupport@awsaustralia.com.au
TYPICAL CONFIGURATIONS
DESIGNER SERIES
Ser ies 6 01 DATE: FEB 21
REPLACES: NOV 09
MAG N U M ™ S lidin g W i n d ow SCALE: NOT TO SCALE
SOUND REDUCTION HOW TO SPECIFY
Acoustic performance of the Series 601 MAGNUM™ sliding window has been tested with a SYSTEM NAME
a number of glass combinations. During testing the window was fitted with weatherpile seals
vertically and horizontally, co-extruded PVC seal at sill. Vantage Series 601 MAGNUM™
Sliding Window
Glass Description
4mm Annealed glass 31dB(A) RW31
FINISH
6.38mm Laminated glass 33dB(A) RW33
10.38mm Laminated glass 35dB(A) RW35 Powder Coat
16mm Insulating glass unit 32dB(A) RW32 Anodised
Secondary glazed sliding window will give significantly higher numbers
COLOUR
Select from the Vantage range of
WERS RATINGS
approved powder coat or anodising
colours
Single Glazed
Glass Description COOLING HEATING Uw SHGCw Tvw Inf
4mm Clear 22% 11% 6.4 0.63 0.64 1.75 GLASS
5mm Clear 22% 12% 6.4 0.62 0.64 1.75 Specify thickness ≤ 20mm
5mm Grey 35% 4% 6.4 0.46 0.36 1.75 Specify thermal performance where
5mm EverGreen 38% 3% 6.4 0.43 0.53 1.75 applicable (Uv & SHGC)
6.38 Laminate 26% 12% 6.3 0.59 0.64 1.75 Specify acoustic performance where
6.38mm Solace 40% 27% 4.8 0.51 0.59 1.75 applicable (RW)
6.38mm Comfort Plus 48% 21% 4.8 0.39 0.42 1.75
HARDWARE
Refer to hardware selection guide for
compatible options
© Architectural Window Systems Pty Ltd 2002-2021
Specification
Assistance
2D & 3D CAD FILES AVAILABLE
GO TO: www.specifyaws.com.au Need
Need help helpspecifying
specifying
this this
product?
product? callemail
1300techsupport@
123 000 and
our
awsaustralia.com.au
qualified technical and
advisors
our
MORE INFORMATION will
qualified
assisttechnical
you withadvisors
product
For the latest updates regarding this product visit our website selection
will assist and
you specification
with product for
www.vantagewindows.com.au your
selection
projectand specification for
your project.
PAGE | 177
DESIGNER SERIES
Se r ies 6 0 1 DATE: FEB 21
REPLACES: NOV 09
M AGN U M ™ S lidin g Wi n d ow SCALE: NOT TO SCALE
SPECIFIERS CHECKLIST
Not all sliding windows are the same. Sure they open and close - but if you want your windows to perform and match the
architectural appearance you are looking for there are some things you should check/compare when choosing your supplier.
FEATURE Series 601 Opposition
Does the window comply with the relevant Australian Standards? YES
All windows should comply but it pays to ask for written proof.
Designed for very exposed locations. YES
Series 601 has a 450Pa water resistance as standard. This makes the product suitable for very
exposed locations.
Suitable for air-conditioned buildings. YES
With a very low air infiltration this sliding window complies with the air-conditioning requirements
of the Australian Standard.
Wide frame with bold sashes. YES
102mm wide perimeter frame.
26mm thick sashes.
Can I make large heavy sliding sashes and still comply? YES
We can make sliding sashes the size of door panels and still comply.
Our sashes and matching fixed sidelight will accept glass from 4mm to10.38mm single glaze and
16mm to 20mm insulating glass units.
Large range of locking options. YES
We offer surface mounted or mortice type locks for this window.
Locks can be colour matched to the sash finish.
Are the sliding sash wheels strong enough to carry the heavy glass. YES
We use large diameter door wheels in this window.
On very heavy sashes we can also fit double bogey wheels that will carry sashes up to 100Kg.
Condensation on fixed lowlights can be drained back to the outside. YES
In colder areas glass can condensate and produce pools of water on the sill members,
if this moisture can’t be drained back to the outside staining may occur on timber linings. The
proprietary Vantage drainage system transfers moisture back to the outside.
Specify condensation drainage when ordering.
Clean flyscreen installation. YES
Flyscreens have been custom designed for this window with splayed screen to match
© Architectural Window Systems Pty Ltd 2002-2021
adjoining splayed fixed sidelight beads.
Flyscreens held in place with non rusting custom nylon clips.
No flyscreen option. YES
There will be applications where you want this window and you don’t want flyscreens, in these
cases you also won’t want recesses to accept screens.
Window can be coupled to sliding doors or other windows without visible rivets. YES
Rounded internal frame corners where ever possible. YES
The main perimeter frame has 2mm soft internal corner radius.
Lowlight mullions also have the same soft internal radius plus they are setback 2mm from the edge
like timber windows to give a clean finish.
Modern paint finishes don’t like sharp corners.
Paddington federation trim option available. YES
We can clip Paddington federation trims straight to the main frame.
These trims can be colour matched or coloured to contrast with the main frame.
Compatible products. YES
MAGNUM™ 601 sliding window has been designed to match and couple with a large range
of other MAGNUM™ products. Refer Installation section for more information.
DESIGNER SERIES
Ser ies 6 01 DATE: FEB 21
REPLACES: NOV 09
MAG N U M ™ S lidin g W i n d ow SCALE: NOT TO SCALE
DESIGN FEATURES:
This high performance sliding window has been designed to complement our existing high quality product range including: SlideMASTER™
and MAGNUM™ sliding doors, Bi-fold doors and the MAGNUM™ awnings, casements, double-hung and ClearVENT™ sashless double-
hung windows.
The window has been tested for compliance with the relevant Australian Standards and achieved a very high water resistance of 450Pa,
making the product suitable for most applications including multistorey apartments.
Very low air infiltration, makes the product suitable for air conditioned buildings.
The extra strong meeting stiles allow large sliding windows to be fabricated in high wind load areas.
Clean splayed and rounded lines for improved visual appearance.
Frame, mullion and transom have a soft 2mm internal radius.
There is a large variety of window combinations possible (SF, FS, SFS or FSSF) with and without highlights/lowlights.
A large range of snap couplers allow these windows to be joined at 90°, 135° and 180° without unsightly rivets or screws. Refer Installation
section for more information. These couplers would also allow this window to couple to Bi-fold windows, Bi-fold doors, French doors,
Sliding doors, and other MAGNUM™ windows
Opening sashes can be fitted with surface or mortice deadlocks.
Sashes run on large diameter, heavy duty wheel carriages, including double bogey for very heavy sashes.
Co-extruded PVC sill seal keeps water out of the system. We have built-in our proprietary ball valve drainage to transfer any water that
may get into the drainage trough to the tubular sump sill, this valve also reduces blow-back through the hooded
external drainage holes.
Threshold and snap-in flat filler ensure that the clean looks are maintained.
Sashes and sidelights will accept a variety of glass thicknesses from 4mm to 20mm insulating glass
units. Dedicated sash rail and stiles for 16mm IGU's.
Perimeter frame will accept 'Paddington' federation trims.
© Architectural Window Systems Pty Ltd 2002-2021
PAGE | 179DESIGNER SERIES
Se r ies 6 0 1 DATE: FEB 21
REPLACES: NOV 09
M AGN U M ™ S lidin g Wi n d ow SCALE: NOT TO SCALE
WINDOW OPTIONS
This window system allows you to fabricate sliding windows with fixed highlights and/or lowlights.
The fixed sidelight is externally beaded, refer cross sectional details.
type 'SF' type 'FS'
Maximum recommended size
2050 x 2756 (without transom) *
F 2100 x 2500 (without transom) * F
Sliding windows can be fabricated in four basic configurations 'SF', 'FS', 'SFS' and 'FSSF'.
The overall size of non-transom windows will be limited by strength of meeting stiles and glass. When thick (heavy) glass is selected
the sash weight will also restrict the sash size.
F F F
type 'SFS' type 'FSSF'
Maximum recommended size 1800 x 3610 (without transom) * Maximum recommended size 1600 x 4800 (without transom) *
* Note
The maximum sizes will be restricted by meeting stile and glass strength as the design wind load increases.
Full height windows (2100mm) are basically sliding doors and would be glazed accordingly. On these full height
windows you could use the heavier meeting stiles from Series 541 sliding door to get higher wind loads.
type 'F' type 'FF'
© Architectural Window Systems Pty Ltd 2002-2021
typical multiple fixed window illustrated.
Pure fixed windows can be fabricated as a single or multiple unit with one piece tubular mullion/s.
Full height fixed lights (without transoms) that can be mistaken for door openings are to be glazed with safety glass, refer AS1288.
If in doubt as to wheather a window requires safety glass always err on the side of safety.
When lowlights/highlights are included the window would be joined with an 'I' coupler.
Combination windows with transom can be created using 'I' coupler.
Important Note:
In elevated situations (above ground level) the position of the transom should
be considered with safety in mind. In some areas there may be regulations
F covering the height of the transom above floor level.
Refer AS1288 for lowlight glass minimum requirements.
F F FDESIGNER SERIES
Ser ies 6 01 DATE: FEB 21
REPLACES: NOV 09
MAG N U M ™ S lidin g W i n d ow SCALE: NOT TO SCALE
WINDOW COUPLING OPTIONS
Pure fixed windows can be fabricated to match the sliding window including using the sliding window perimeter frame.
For other fixed light options refer awning window Series 616.
Transom Coupler
Series 601 sliding windows are joined to lowlights/
highlights with 'I' coupler (42030).
On Series 601 the fixed lights can be fabricated from
F F the sliding window perimeter frame for a perfect
match with the adjoining slider frame.
alternatively:
Fixed frames can also be fabricated out of the awning
F F F F frames (72821 or 72822). These two frames would
also allow Series 616 awnings to be fitted over/under
sliding windows.
Pure Fixed Windows
Series 601 fixed windows can be fabricated from the
sliding window perimeter frame or one of the two
awning frames (72821 or 72822).
Transom fixed windows in Series 601 are assembled
F F F F to match the sliding window with the coupler running
through the transom joint.
Fixed lights can be fabricated in one large window with
F F F F mullions running through in 102 or 50mm framing,
refer Series 616 for frame options.
Vertical Coupling
Sliding windows with highlights and/or lowlights can only be coupled vertically to another window/door using the heavy tubular coupler
(42027).
Sliders without highlights and/or lowlights can be coupled vertically with the 'I' coupler (42030).
The 'I' coupler allows us to clip this sliding window to any 102mm product including Series 548 French and Bi-fold doors, Series
© Architectural Window Systems Pty Ltd 2002-2021
541 & 542 Sliding doors, Series 618 MAGNUM™ Sliding doors, Series 546 Bi-fold windows, Series 525 Louvre windows, Series 614
ClearVENT™ windows and Series 616 MAGNUM™ Awning windows.
Series 601 Sliding windows will also clip to the 135° bay (42026) and 90° corner (42022) couplers. Refer to installation section for
more information.
F F F F F F
F F
F F F
Highlights
Series 601 Sliding windows can also be fitted with fixed highlights and/or
lowlights. It would also be possible to fabricate sliders over sliders.
PAGE | 181DESIGNER SERIES
Se r ies 6 0 1 DATE: FEB 21
REPLACES: NOV 09
M AGN U M ™ S lidin g Wi n d ow SCALE: NOT TO SCALE
VERTICAL CROSS SECTION - THROUGH OPENING SASH
‘SF’ and ‘FS’ windows
Head Height Width Meeting stile combinations
mm mm Light Medium Heavy
1600 1800 L/150 S 1762 2160 2542
U 2643 3240 3813
1600 2110 L/150 S 1563 1422 2261
U 2351 2882 3392
1600 2410 L/150 S 1448 1775 2088
U 2172 2662 3132
1600 2710 L/150 S 1377 1688 1986
U 2066 2532 2979
Table: Wind Ratings (Pa) for type 'SF' windows
Rating tables for window meeting stiles.
S = Serviceability limit state (deflection = L/150).
U = Ultimate strength limit state (factored yield strength = 104 MPa).
These tables have been calculated using nominal section properties.
A typical assembly has been tested as per the requirements of AS2047.
CAD file: DWG or DXF
VAN_601
© Architectural Window Systems Pty Ltd 2002-2021
Splayed threshold sheds water and dust off the window.
Co-extruded PVC sill seal.
Heavy duty 38mm diameter wheels.
Weatherpile seal.
Proprietary drainage valves.
Sill
Nylon drainage hoods.
PVC sill flap closes off the gap between window and sill brick.
101.60mm frameDESIGNER SERIES
Ser ies 6 01 DATE: FEB 21
REPLACES: NOV 09
MAG N U M ™ S lidin g W i n d ow SCALE: NOT TO SCALE
HORIZONTAL CROSS SECTION
Jamb
Stainless steel self tapping
frame assembly screws.
Aluminium gussets.
Window can be fitted with
16mm insulating glass units,
as shown top right.
ANDO™
Mortice Lock
Weatherpile seals.
Heavy meeting stile
Meeting
combination extra shown
stile/
dotted.
mullion
Standard stiles will accept
glass up to 7.52mm thick. MIRO™
Mortice Lock
Wrap around PVC channel
wedge.
CAD file: DWG or DXF
VAN_601
© Architectural Window Systems Pty Ltd 2002-2021
Surface mounted 'Albany'
lock option illustrated on
plan view.
Other alternatives illustrated
right.
ICON™
Mortice Lock
Jamb ANDO™ surface
mounted lock
PAGE | 183DESIGNER SERIES
Se r ies 6 0 1 DATE: FEB 21
REPLACES: NOV 09
M AGN U M ™ S lidin g Wi n d ow SCALE: NOT TO SCALE
CUSTOM FLYSCREEN FITTING DETAILS
Flyscreen held in place with
custom nylon turn buckle/finger
grip.
© Architectural Window Systems Pty Ltd 2002-2021
MORE INFORMATION
This detail also shows the optional
mortice lock. For more details go to
our web site:
www.vantagealuminium.com.au
Vertical cross section through custom flyscreen, note how Horizontal cross section through flyscreen. The screen is
the splayed flyscreen matches the splayed fixed sidelights. retained by rotating turn buckle/finger pull at mullion location.DESIGNER SERIES
Ser ies 6 01 DATE: FEB 21
REPLACES: NOV 09
MAG N U M ™ S lidin g W i n d ow SCALE: NOT TO SCALE
SUMMARY
24mm Wide rails with 26mm
wide stiles are strong enough
for most locations in Australia.
CAD file: DWG or DXF
VAN_601
Standard sashes will accept glass
from 4mm to 7.52mm thick.
We also have dedicated double
glazing sash members that will
accept insulating glass units up
to 16mm thick.
Deep bottom rail accepts very
large diameter wheels to ensure
smooth slide.
Co-extruded PVC sill seal keeps
water out of the system. The
window achieved a very high
water resistance of 450Pa.
Heavy duty 102mm wide
frame matches other Vantage
Proprietary ball valve reduce blow-back
MAGNUM™ windows, sliding
and again contributes the overall water
and folding doors.
resistance of this product.
© Architectural Window Systems Pty Ltd 2002-2021
Sump sill allows any water that should get
into the running tracks to be drained down
through the proprietary ball valve and out
of the window.
When no flyscreens are fitted in the frame
the screen recess is closed off with snap-
in splayed filler. This filler guides dust and
water off the window and significantly
improves the appearance when compared
to a typical sliding window.
One hooded drain hole each end of sill.
The window frame is designed to be built into
cavity brick as shown on this page or brick
MORE INFORMATION veneer construction.
For building-in details or CAD drawings go to our web A large range of couplers, trims and lugs
site: www.vantagealuminium.com.au or contact us at: ensure that the product can be fitted cleanly
techsupport@awsaustralia.com.ai into most situations.
PAGE | 185DESIGNER SERIES
Se r ies 6 0 1 DATE: FEB 21
REPLACES: NOV 09
M AGN U M ™ S lidin g Wi n d ow SCALE: NOT TO SCALE
ALTERNATIVE COMMERCIAL SLIDING WINDOW
Alternative Commercial Sliding Window
If you are looking for a bolder frame consider the AWS Commercial
sliding window Series 462.
Features overview:
• Bold square commercial frame with built-in nailing fin.
• Nailing fin sub-sill is standard.
• Compatible with conventional CentreGLAZE™ shopfront framing.
Head
MORE INFORMATION
Refer AWS Commercial Specifier Manual for more details.
Coloured animated images can be seen on AWS web site:
www.awscommercial.com.au
Sill
© Architectural Window Systems Pty Ltd 2002-2021
Jamb
Scale: Half full sizeYou can also read
