PRE-SEASON CATALOGUE 2018 - ALL PROUDLY DISTRIBUTED BY KUBOTA AUSTRALIA SEE YOUR DEALER TODAY! - Rhys Evans
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
PRE-SEASON CATALOGUE 2018
P.A.
*SEE LAST PAGE FOR TERMS & CONDITIONS
GREAT PLAINS KUBOTA IMPLEMENTS KUBOTA M SERIES TRACTORS
NEW TO KUBOTA AUSTRALIA
ALL PROUDLY DISTRIBUTED BY KUBOTA AUSTRALIA
SEE YOUR DEALER TODAY!
BALERS
ANOTHER SEASON
SQUARED AWAY.
Krone’s market leading range of mowers,
tedders, rakes and balers deliver the P.A.
performance and reliability you need to take
your output to the next level. Engineered to
thrive in the tough Australian conditions.
It’s all about relentless performance.
SQUARE BALERS
M U LT I B A L E B A L E R S
• Using a divided needle carrier, the 870HDP MultiBale can produce
one rock-hard bale or up to 8 small bales with 2 strings per bale,
bundled together with 3 strings around the large bale.
• Bale, handle and haul with the ease of large square bales, then cut
three strings to utilise small bales for use at a stock feed trader,
horse or hobby farm.
• In the case of an overload, the fully sealed and lubricated cam
type clutch will disengage. Reducing throttle speed will clear the
blockage and the cam clutch re-engages without stoppages or
shear pin replacement.
B I G PAC K H I G H S P E E D B A L E R BIG PACK 870 HDP XC MULTIBALE
• Standard models, High Density Press (HDP) and HDP-HS Xtreme
models available.
• Machines across the range outperform the competitors in bale
density and baling speed.
• Using the heaviest of components throughout the machine (with the
largest flywheels on the market, heaviest drivelines and longest bale
chambers) the HighSpeed range impresses every experienced baler
operator with its productivity and technical sophistication.
• The HighSpeed range produces the best shaped and densest bales
on the market.
• HDP-HS Xtreme model is standard with Auto lube system which
greases the complete VFS pre-chamber and replaceable wear liners
for the bale chamber directly behind the plunger area. Other features
are in line with our HDP High Speed.
Pre-season sale ends 30 April 2018 – see your dealer today!
2. kroneaustralia.com.au BIG PACK 1290 HDP HS
CAMLESS PICKUP
SQUARE BALERS
A C T I V E LY D R I V E N P O W E R F E E D R O L L E R
BP 1290 HDP II
HDPII BALER STA N DA R D O N
• Krone has set a new benchmark in large square A L L B I G PAC K S
bale production with the HDPII, with a world first;
• Fully automatic clutches, block it,
the development of a unique 8-knotter system.
idle down and unblocks itself.
• Features a patented 8 double-Knotter system unique
• Standard weight scales.
to Krone to handle the extremely heavy bales.
H E A V I E S T F LY W H E E L S • Tandem steering axle with
• The Krone HDP II can produce up to 90% higher
radial tyres.
throughputs or up to 10% more density at the same
ground speed than our original HDP. • Hydraulic soft start available.
• The Variable Fill System (VFS) unique to Krone offers • Hydraulic Jacks.
the highest throughput, 5-phase feed sequence for the • IsoBus terminal.
bale chamber, offering rock-solid and well formed bales, • LED lights.
even in small windrows.
• Electric bale length adjustment.
• Twine boxes fold down hydraulically for easy refilling
of twine.
NEW
BALEC
OLLEC
T
BP 1290 HDP II & NEW BALECOLLECT
B A L E AC C U M U L ATO R
• Collects and deposits up to 4 bales.
• Fully integrated Krone on Krone design with scales.
• Compatible with 6-Knotter HighSpeed and 8-Knotter HDPII.
• Automatic and manual settings to push bales off.
• Unique telescoping drawbar made for smooth road transport.
• Transport mode (travels like a trailer at 50km/hr under 3m transport).
• Deposits bales in either of the following formations:
3+1 bales, 3 bales, 2 bales (side by side), 2 bales
(apart with space in the middle), 1 bale.
3.
BALERS
NEW
KEEP THE COMP
R
RANGIEMA
BALES COMING.
Krone Comprima Balers are
uncompromising when it comes
to producing bale after bale of the
highest quality.
P.A.
NEW V180 XC
3 YEA,0R00
OR 30 NTY V150 XC XTREME
WARRA
BALE OVOGRIP
NEW W-PATTERN CAMLESS PICKUP
ON N ATOR
ELEV
BELTS
ROUND BALERS
NEW COMPRIMA ROUND • Hard or Soft core adjustment to suit COMPRIMA XTREME
BALER RANGE your conditions.
• Only available as V150 XC Xtreme, which
• Design update includes new side panels • Pendulum mechanism for the EasyFlow produces 0.9m to 1.5m bales with a tight core.
and guards at the rear as well as a new Pickup ensures perfect contour following.
• Heavy-duty gears and drive chains give safe,
lighting system. • Krone’s unique, Gold Medal Winning reliable overload protection in case of
• New W-pattern tine arrangement rather NovoGrip Belt & Slat Elevator system comes sudden impacts.
than straight line for a constant flow of crop. with a 3 Year or 30,000 Bale Warranty.
• Same strong features as Comprima but offers
• The largest in market 530mm feed rotor • The NovoGrip Belt & Slat Elevator system faster elevator and pickup speed for higher
for super-efficient throughput. ensures perfect round bales every time. productivity, a 25mm wider belt and heavier
drive system, 1½ inch main drive chains and
pendulum pickup wheels.
Pre-season sale ends 30 April 2018 – see your dealer today!
4. kroneaustralia.com.au
ROUND BALERS
FORTIMA ROUND BALER
• The Fixed Chamber entry level F1250 produces
1.25m bales and is priced from $59,620 including GST.
• Very easy to drive and very low horsepower
requirements.
• Choose from the V1500 (0.9 to 1.5m) or the V1800 6 FREE NET ROLLS
(0.9 to 1.8m).
WITH ANY ROUND BALER
• Chain & Slat provides high density bales and avoids
fragmentation in dry hay or wet silage conditions. OFFER ENDS 30 APRIL 2018
• Camless EasyFlow Pickup.
INSIDE THE RELIABLE FORTIMA
EASYFLOW CAMLESS PICKUP
V1500 MC
KRONE FILM KIT
• Krone’s Film and Net Wrap Kit is available for all
Comprima balers.
• Standard on Combi Pack Xtreme, option for other
Comprima balers.
• Improves silage quality due to higher density and less
air pockets.
• Easier removal of plastic when feeding out the bales.
• Great extra feature to offer for the contractor’s customers.
V1500 5.
NEW CV 150XC
BALERS
NEW
BI
COM
PACK
P.A.
XTREME QUALITY.
XTREME OUTPUT.
ROUND BALERS
N E W C O M B I PAC K
• New facelift Comprima Combi Pack with a new design
update including new panels and lighting system.
• New ultrasound sensor that replaces the sensor arms on the
wrapping table. NEW RUBBER WHEEL
BALE TURNER FOR CV 150XC ONLY
• Extra wheel and rubber mat on the bale turner that effectively
protects the paddock and drop down action of the bale turner.
C O M B I PAC K X T R E M E
• Standard with new film and net system from factory.
• Very fast baling speed with new bale transfer to wrapping table,
this baler can produce up to 60 bales an hour.
• Comes standard with tandem axle and on-board hydraulic system.
• Storage for 12 film rolls under covers.
6 FREE NET ROLLS
WITH ANY ROUND BALER
OFFER ENDS 30 APRIL 2018
Pre-season sale ends 30 April 2018 – see your dealer today!
6. kroneaustralia.com.au CV 150XC XTREME - FILM ON FILM
MOWERS
EASYCUT
TRAILED
CENTRE
4m & 5m Pull-type
Mower Conditioner
NECW
UT TC
E ASYAILED
TR
R
MOWE
ECTC 500CRS
DISC MOWERS
EASYCUT TRAILED CENTRE
• Available in both 4m & 5m models.
• Widest conditioner rollers in the industry.
• Optional 3m transport kit means you can switch from field
to road position without leaving the cab for easy travel.
STEEL ROLLERS
• 4 conditioning systems available – Non-conditioner,
Flail Conditioner, Rubber and Steel roller conditioners.
• Other features include SafeCut, SmartCut cutterbar and
a 2-point hitch connection.
EC 3200CRI
EC TRAILED MOWERS
• Trailed Mowers from 2.8m to 6.2m.
• Centre and side pull available with rubber rollers or
Krone’s V-tine conditioner (Steel on selected models).
ECTC 500CR 7.
MOWERS
QUALITY THAT
CUTS TO THE CHASE.
AM-R 320
SMARTCUT CUTTERBAR
• Krone’s SmartCut cutterbar features Lifetime Oil Filling.
• Krone’s fully welded one piece construction gives
exceptional resilience.
• Satellite Gears are a Krone development featuring
massive spur gears to ensure positive mesh, slow speed
and efficient power transmission across every disc.
• Increased overlap between discs ensures a clean cut
and smooth crop flow.
DISC MOWERS
AM-R MOWERS
• Working width from 2.4m to 3.6m.
• SafeCut and SmartCut included.
• Quick change blades.
• New heavy headstock and blade box.
AMR 320
• Driven by drive shaft – no belts.
ECR MOWERS
• Work widths 2.8m to 4.0m without conditioner, steel,
rubber or V-tine Conditioner.
• The world’s best constructed linkage mower for Australia’s
tough conditions.
• DuoGrip Centre of Gravity Suspension System suspends
the mower in its centre of gravity, guiding with two arms
to maintain a uniform ground pressure across the entire
working width.
Pre-season sale ends 30 April 2018 – see your dealer today!
8. kroneaustralia.com.au ECR 360
DISC MOWERS
P.A.
ECF 360CR / ECB 1000CR
SAFECUT SHEAR PIN
D I S C I M PAC T P R OT E C T I O N
SYST E M STA N DA R D AC R O S S
ALL KRONE MOWERS
• When the disc hits an obstacle the roll pin breaks and the disc spins
up on the threaded drive shaft, moving out of the way of the next disc,
which continues to spin without damage.
• Enables you to replace a simple roll pin instead of the whole module.
ECF MOWERS
• NEW ECF320MT without conditioner is now available with
a trailing headstock.
• Entire ECF range is now available with a trailed headstock.
• The trailing headstock has suspension springs integrated
allowing the machine to travel freely under a fixed headstock.
• Front Mounted Mowers from 3.2m to 3.6m.
• Your choice of Steel / Rubber / V-Tine or no conditioner.
ECF 360CR
ECB MOWERS
• Triple Combination Mowers from 8.7m to 10.1m.
• Choice of 10 models, Steel / Rubber / V-Tine / no conditioner
with or without cross conveyor.
• High output rates and heavy construction for massively
efficient mowing.
ECB 870CR 9.
RAKES
LINE AFTER LINE
OF RELENTLESS
PERFORMANCE.
Krone rakes deliver the performance and precision
you need to get the job done day in day out.
SWADRO 1400PLUS
SWADRO RAKES
• Single Rotor working widths between 3.5m to 4.6m.
• New TC / TS Multi Rotor Range with working widths
up to 19m in centre or side delivery.
• Fully enclosed Gearbox with Dry Cam Track design,
no oil leaks.
• 3 year warranty on Cam Track. SWADRO 38
• Tine arms fold for easy transport.
• No grease nipples for Tine arms.
• Your choice of height adjustment – mechanical or fully
electric from the cab.
• Steep cam track design for square even windrows.
• Lift Tine standard on all models.
• Single rotor lift out on all models.
• Krone Jet Effect lifts and lowers the rotors at the front
first to reduce the risk of crop contamination.
Pre-season sale ends 30 April 2018 – see your dealer today!
10. kroneaustralia.com.au NEW SWADRO TC 1000DURAMAX DRY CAM TRACK
SWADRO RAKES
• Maintenance-free steep dry cam track design
made from bainite hardened cast steel with
spherical graphite.
• 3 year warranty on dry cam track.
• Steep angle is the key for a precise
windrow shape.
FOLDING TINE ARMS
• Thick tubed tine arms and large in diameter
that can be folded for easy transport and
storage height.
• Simply undo two bolts to easily remove each
tine arm complete with the bearing housing.
P.A.
NEW SWADRO
TC 1000
KRONE’S LIFT TINE
• Lifts the crop off the ground
towards the centre of the tine
for improved fodder quality
and less drag.
• Higher forward speeds.
• Less crop loss.
SWADRO TC 760P 11.NEW KWT1300
TEDDERS
QUALITY ENGINEERING. P.A.
INCREASED OUTPUT.
With 0.9% finance, there has never been a better time
to invest in the quality and performance of Krone.
TEDDER RANGE
• Linkage tedders with working widths from 4.6m to 11.0m.
• Trailed tedders with working widths from 8.8m to 19.6m.
• Krone’s OctoLink clutches are always in mesh for full power and do not KWT 882/8
require greasing.
• Features the heaviest square tube frame on the market with the gearbox
installed under the frame to maintain strength in the frame and remove
any stress.
FORAGE BENEFITS
• The two 9.5mm tine rods that form one pair of tines vary in length to
provide the special Krone combing effect for optimum treatment and REINFORCING RING ADJUSTABLE SPRING OCTOLINK
cleanest forage.
• The tine arms mesh as they rotate, spreading the material uniformly
across the working width to ensure the best possible wilt for quality forage.
• Central border spreading control spreads the crop away from the
boundary for easier harvesting. Angle of the throw is adjusted
without the need for tools so you can adapt in field quickly.
Pre-season sale ends 30 April 2018 – see your dealer today!
12. kroneaustralia.com.au DIFFERENT LENGTH TINESK R O N E G E N U I N E PA R T S
Your investment in a Krone machine shows
that you demand high quality and functionality. GENUINE PARTS & CROP PACKAGING
Using parts from the original manufacturer is the
only way to ensure your machine will maintain its
peak performance well into the future.
All Krone parts are approved to the highest OEM
standards, ensuring longevity, value for money
and reducing the cost of repair.
PRE-SEASON PARTS SAVINGS.
Contact your Krone dealer today to organise a Pre-season Service
to ensure your machines are ready for the upcoming season.
Order your parts in the Pre-season for maximum savings and early delivery.
PRE-SEASON ENDS 30 APRIL 2018!
SILAGE FILM NEW BALING TWINE
• Krone’s 5 layer silage • New Krone Excellent Twine
film delivers optimum Multibale2, HDP Smart2, HDP
performance and clings Strong2 and HDP X-treme2 baler
instantly and firmly twines are superior quality twines
to each bale. that ensure every bale is tightly
and effectively tied.
• Krone 500mm and 750mm
film can be stretched by • Krone’s New Excellent twines
up to 70%. offer superior knot strengths of
245kgf (Multibale2) to a massive
• Krone tear and puncture
335kgf for the new HDP X-treme2.
resistance silage film
protects bales during • Krone Excellent twine HDP offers
wrapping and transit. one of the strongest resistance
twines on the market!
NEW NET WRAP
6 FREE
• Krone’s range of net wrap
products are renowned for their NET ROLLS
exceptional quality and high WITH ANY ROUND BALER
resistance to tearing.
OFFER ENDS 30 APRIL 2018
• All new Excellent Smart Edge
and Strong edge net wraps
provide the optimum bale
coverage with their exceptional
edge-to-edge spread.
• New Excellent Edge X-tra
protects perfectly shaped bales
by adding a few centimetres of
extra coverage to the edges.
13.WAGONS
NEW
WAGO
ALWAYS BY YOUR SIDE RANGEN
WHEN IT COUNTS.
When there are jobs to be done you can be confident
that Krone Wagons will always be right by your side.
Quality engineering and an unparalleled work ethic
make Krone wagons the partner you can rely on.
P.A.
ZX SERIES
W A G O N R A N G E A X / R X / Z X ( 2 8 m 3 - 5 6 m 3)
• Boost your productivity with the speed and effectiveness of Camless
Pickup design, large rotors with wide hardox tines, and a sloping floor
at the front to reduce the length of the passageway, increasing efficiency
for easy loading.
• The Camless EasyFlow Pickup has 68% fewer moving parts for quieter
running and reduced wear, and the crop feed roller eliminates the risk
of crop pushing in uneven swaths.
• Comprised of sturdy steel walls, the multi-purpose wagon can also
be used to chop into.
• Simply swing the complete knife bank to the left side of the machine
for easy access to knives.
• Features the best and strongest axles, using components from
Krone’s semi-trailer manufacturing division.
• Australian wagons come standard with largest standard tyre size.
• Optional weight scales available.
RX 400GD
NEW ZX WAGON RANGE
• Highest capacity silage wagon on the planet
• Hydraulically driven pickup
• Rotor driven by a power belt and rotor internal planetary gearbox
to widen the rotor with 48 knives and 37mm cut.
• Hydraulic pivoting front wall, boosted capacity and variable
pressure control.
• Speed sharp standard
NEW RX WAGON RANGE
• The new RX Wagon is a new addition to our wagon range which has a
larger appetite than our MX and sits below our top of the range ZX wagon.
• Features include a 2m camless pickup, standard SpeedSharp system,
hydraulic pivoting front wall and hardox plated rotor tines, which sit
closer to the knives.
Pre-season sale ends 30 April 2018 – see your dealer today! SPEEDSHARP
14. kroneaustralia.com.au STANDARDBIG HARVESTERS & MOWERS
BIG M
SELF-PROPELLED
MOWER
• 450 HP 6 cylinder Liebherr engine
• Available with Steel or Rubber roller
conditioners for perfect conditioning NEW
to suit your application. BIG M
• Comes standard with cross conveyor
auger system with hydraulic hoods
450
that are controlled from the cab.
• CRI (Roller Conditioner) also comes
with swath forming hoods with
hydraulic guided swath boards.
• Other standard features include:
hydraulic cut height, hydraulic
floatation setup, GPS ready, front and
rear suspension and active steering.
• Self-propelled mower with up to
11.7m working width for CR model
and 9.95m for CV-Flail model.
NEW BIG M 450
BIG X 770-3
THE MOST POWERFUL
FARM MACHINES ON EARTH.
NEW BIG X 580
BIG X HARVESTERS
• Self-propelled Forage Harvester from
490-1,100 HP.
• New smaller range with 490-626 HP ensures
Krone can supply the right machine
for your business.
• Stone and Metal detector stops intake instantly.
• 6 x feed roller in LOC housing.
• Larger drive liners and components.
• Moisture sensor and yield meter available.
• EasyCollect Header, XDisc Direct Cut Head
and EasyFlow Grass Pickups available.
15.SEEDING COMBINATION NEW
S
RANCGE
KUBOTA
IMPLEMENTS
RANGE.
Kubota offers Australian farmers
a complete ag solution thanks to
the Kubota implements range.
This exciting range has over a
hundred years’ heritage and features
everything you need when it comes
to spreading, cultivating and seeding.
Every implement in the range is
designed to the high standards you
have come to associate with the
Kubota name. Performance and
precision are yours for the taking
with the Kubota implements range,
now available.
PRECISELY
P.A. WHAT YOU NEED.
Kubota has the seeding implement you need to suit your
specific operation. Designed to thrive in the tough Australian
conditions, they keep on delivering time and time again.
SC SERIES
The SC Seeders find the perfect balance between high-tech
performance and ease of operation. They work hard, yet are
easy to transport. In designing the series, every detail has
been considered, including ease of access when it comes to
maintenance. The SC Series can help boost your efficiency, save
you time and money. It puts precision farming at your fingertips.
16. Find out more at kubota.com.auSEEDING COMBINATION
I S O B U S C O M PAT I B L E
Precision farming makes mechanical work smart, efficient and easy. With the
ISOBUS technology your implements are better connected, operated, controlled
and monitored. Your needs and demands drive Kubota’s precision farming solutions.
SC1300C/SC1400C
• Excellent depth control from within the cabin with high
working speeds.
• ISOBUS iM Tellus and TellusGO universal terminals put
precision farming at your fingertips.
• Access platform enables easy maintenance.
• Working procedures easily monitored from the safety
of the tractor cabin.
17.COMPACT DISCS
NWEIDW
ER
ING
WORKTHS
WID
P.A.
CD 2700T
CD 2500T CD 1000
COMPACT DISCS
The even incorporation of straw and residues • Robust disc arms and high capacity • Cage roller may be selected for a more
is a key factor for seed germination. Therefore, bearings deliver excellent durability. economical option.
Kubota has designed the CD 1000 and CD 2000
• Maintenance-free bearings. • SH Box is the ideal factory fit seeding option.
Series to comply with these requirements, but
also offer farmers a versatile machine that is • Choice of 2 rollers. • Conical shape ensures constant cutting
ready for shallow as well as deeper cultivation angle independently of the disc diameter.
and the mixing of the straw, performance with • Actipack roller for clod crushing and
large amounts of residue (straw, intermediate very firm re-compaction of the soil.
green crops, etc.) good penetration and cutting • Easily adapted for heavy and sticky
quality, output, simple adjustment and minimum soil conditions.
maintenance costs.
18. Find out more at kubota.com.auDISC SPREADERS
ISOBUS
C O M PAT I B L E
The Kubota weighing spreaders are standard equipped
as ISOBUS 11783 compatible spreaders. Easy to
operate with the IsoMatch Tellus or Tellus GO.
T H E R OTA F LOW P R I N C I P L E
The name RotaFlow describes the Kubota spreading
system; the fertiliser granules are already rotating when
they reach the spreading vanes. This initial smooth
acceleration of the fertiliser prevents fragmentation
of the granules due to the impact of the vanes and
maintains the spreading characteristics of the material.
ALUMINIUM EXTENSION RIMS
The volume of all basic hopper capacities can be
SPREAD YOUR
increased with aluminium hopper extensions (except
for the DSC). The extensions are easy and quick to SUCCESS THIS
assemble. An optional hopper cover is also available
for the complete spreader range. SEASON.
DSX-W 1875
DISC SPREADERS
• Full section control available on the GEOSPREAD
model with up to 24 sections.
• 4 load cells (5 tonne per cell) and centralised
reference sensor deliver unrivalled dosing accuracy.
• Easy setting of application rate for every spreading
width and forward speed.
19.PLOUGHS
PLOUGH ON THROUGH ALL THE BIG
JOBS WITH KUBOTA IMPLEMENTS.
RM2005 RM 2005
• Fitted with the remarkable Non-stop system for stony conditions.
• Tractors with up to 150 PTO HP can easily lift and pull these ploughs.
RM3005V
• Designed for stony soil conditions and tractors up to 200 PTO HP.
• Variomat® plough for optimal output.
• Non-stop system requires no maintenance.
• Front furrow and working width all adjusted hydraulically from the cabin.
RM 3005V
POWER HARROWS
PH 1000 PH 2000 PH 2000F PH 2000
PH 1000 PH 2000F
• PH1000 is a medium sized power harrow for tractors up to 140 PTO HP. • Foldable power harrow PH 2000F features trough design that does
not require any lateral frame.
• Self-supporting trough construction, as well as standard
‘Quick-fit’ tine holders. • For optimum performance, the trough design provides a high
clearance of 95mm.
• Conical bearings offer optimum performance.
• Available in 4.00m and 5.00m working widths.
• Working width 2.50m and 3.00m.
PH 2000
• PH2000 is the perfect choice for medium farms and contractors for
seedbed preparation and even in combination with all types of seeders.
• Always with 12 rotors in 3.00m widths.
• For tractors from 85-180 PTO HP and widths of 3.00, 3.50 and 4.00m.
20. Find out more at kubota.com.auMULCHERS
SE 7320
SE 1150 SE 5280
SE SERIES
P.A. Kubota grass and straw choppers cope with whatever is required; every model
is built for a variety of different tasks. Solid construction with a robust gearbox
and very strong power transmission to the ‘V’ belts driving the rotor. The chassis
is strengthened with double plating in the areas subjected to highest stress.
This, combined with Kubota’s precisely manufactured rotor shafts and hard
wearing blades, makes them extremely reliable. Minimal maintenance is required.
VEGETABLE PLANTERS
VP 1250 – 12 SINGLE ROWS
VP SERIES
As a competent partner in precision sowing
Kubota delivers the technological know-how: VP 1000-VP 1000F
the VP Series. The particularly clear structure 2.00M - 6.50M WORKING WIDTHS
and the incorporated intelligent technology the
• Versatile, precise and economic.
machine is extremely user friendly and highly
flexible, from setting to sowing. The VP Series • Guarantees customised precision sowing for all sorts of vegetable seeds.
guarantees customised precision sowing for
all sorts of vegetable seeds and is the ultimate • The ultimate machine for vegetable producers.
machine for vegetable producers. • Available rigid or as a parallel hydraulic folding model.
21.AIR DRILLS
GREAT THINGS HAPPEN P.A.
WITH GREAT PLAINS.
Great Plains is a company proud of its
Midwestern USA roots. Based in Salina,
Kansas, Great Plains has been a leader in
seeding equipment since its inception in 1976.
Now a Kubota Company, Great Plains not only
remains a leading producer of Grain Drills,
but is also recognised as a leader in Vertical
Tillage equipment.
NO-TILL DUAL HOPPER AIR DRILLS
THE SMALL, BIG TIME PERFORMER
Sometimes big things do come in small packages, and the
Great Plains 6-9m Narrow Transport Air Drills are no exception.
This new, stronger, second generation incarnation of this drill
features one pass no-till operation, dual hopper for seed and
fertiliser all in a compact design with 3m transport width.
The down pressure exerted over the coulters up to 250kg,
making this machine ideal for the tough Australian conditions.
Pre-season sale ends 30 April 2018 – see your dealer today!
22. Find out more at greatplainsaustralia.com.auAIR DRILLS
G REAT
P
OWNEL AINS
RS
S
KUBOETE YOUR
A
FO DEALER
SPARREYOUR
P RTS
NEEDA S
NERTW
AN II
SPA RILLS
AIR D
NTA 907-2
S PA R TA N I I A I R D R I L L S
• Double hopper, Seed and Fertiliser.
• Dual shoot to opener.
• Metering system with 4 sowing shafts.
NTA 607-2
• Simple electronic calibration,
done in 2 minutes.
• New operator terminal.
• Updated second generation.
23.MECHANICAL DRILLS
NEAW
NICAL
MECHRILLS
D
1206NT
DRILL DOWN ON THE
QUALITY AND THE DEAL.
Set yourself up for the season ahead with
the quality and reliability of Great Plains.
MIN-TILL & NO-TILL 800
MECHANICAL DRILLS
P R E C I S I O N D R I L L I N G AT I T S F I N E ST
Great Plains delivers a highly economical seeding solution
with the most accurate seed depth and soil to seed contact.
Our minimum till 800 - 1500 drills are proven performers
that come with fertiliser and small seed box used for grain,
pasture renovation and all sorts of small seed applications.
The CPH No-Till coulter drawbar makes these machines
even more versatile. The 1006NT and 1206NT No-Till drill
rounds up the range with our standard Turbo Coulter.
Pre-season sale ends 30 April 2018 – see your dealer today!
24. Find out more at greatplainsaustralia.com.au CPH 15 WITH 1500 DRILLVERTICAL TILLAGE
TURBOMAX
True vertical tillage has become the
standard for yield boosting seedbed
preparation as it conserves soil moisture.
The industry-leading Turbo-Max offers CONSERVE SOIL
MOISTURE.
agronomic benefits as it features Turbo-
Max blades that are 19cm apart on two
rows of coulter gangs. Rear gangs offset
the front gangs, splitting the blade spacing
to 9.5cm for superior residue sizing in
one pass. Gang angle is hydraulically
adjustable on-the-go from 0° to 6°, offering
greater flexibility to match changing field
conditions. The TurboSeeder cover crop
attachment is available for all 3 or 4 digit
wider transport models.
P.A.
NEW
VERTIC
TILLAGAL
E
1500TM WITH TURBO SEEDER
(AVAILABLE FROM 2.6M TO 14.6M)
MAXCHISEL
MC 5109/MC 5111/MC 5313/MC 5315
The Great Plains MaxChisel is an aggressive
primary tillage tool that utilises a double row of
610mm discs with the patented “Samurai Edge”.
Several shanks that are spaced 38cm work in 20
to 30cm depth with Auto Reset system. The rear
roller is controlled via hydraulic down pressure.
SUB-SOILER
SS 0300/SS 1300/SS 1800
Designed for deep vertical tillage up to 40cm, the
Great Plains Inline Sub-Soiler shatters yield-robbing
compaction layers created by horizontal tillage tools
MC 5109 SUB-SOILER such as ploughs, disks, and sweep implements.
NECIW
SION
PRECISION PLANTERS
PRE TERS
PLAN
YIELD PRO PLANTERS
3-POINT LINKAGE/PULL TYPE/STACK FOLD/BULK FILL
PLANT THE SEED OF SUCCESS
Great Plains’ wide range of Yield Pro precision
planters offers true No-Till or Min-Till planting.
The unique double row planting technology is
a proven yield advantage as it allows plants to
grow better with more effective water utilisation.
Liquid or dry fertiliser options are available from
Great Plains.
25.M7-1 SERIES
HIGH POWER
FARM TRACTORS.
The seriously versatile Kubota M7-1 Series has raised the standard for mid-
sized tractors. From the entry level, powerful STANDARD models through to the
precision-farming-ready PREMIUM models topped with KVT variable transmission,
there is an M7-1 to suit your farming operation.
M7151 WITH LM2605 FRONT END LOADER
POWERPLANT TA K E C O N T R O L BIG MUSCLE
K U B O TA’ S M O S T P O W E R F U L E N G I N E G R E AT V I E W S F R O M T H E C A B I N STRONG LINKAGE AND HYDRAULICS
130 to 175 HP with boost and industry leading Feel right at home with unsurpassed visibility, 9400kg lift capacity, up to 110L/min hydraulic
constant power and torque. suspension comfort, easy control layout and flow for all-round performance.
enough space for a generous passenger seat.
NEVER IN THE WRONG GEAR M U LT I - TA S K E R
POWERSHIFT OR KVT TRANSMISSION S I M P L E A N D S O P H I ST I C AT E D U N B E ATA B L E W I T H F R O N T E N D
Choice of 24 speed powershift or KVT variable S TA N D A R D A N D P R E M I U M LOADER
driving to suit any operation. The series offers entry level controls and The LM2605 front end loader turns the M7-1
hydraulics in the Standard specification and into a real multi-talent for mixed farming.
FA S T PAC E high-end components with electro-hydraulics,
MOVE WITH 50KM/H monitor control and GPS readiness in the EASY UPKEEP
For those urgent jobs the optional 3 stage front premium models. WITH MAINTENANCE IN MIND
suspension allows the M7-1 to travel at high Daily checks are a breeze due to grouped
speed with the control and comfort you expect. and easily accessible components.
26. Find out more at kubota.com.auM-40 SERIES
HEAVY–DUTY
FARM TRACTORS.
Simple to operate yet incredibly powerful, the economical M-40
Series tractor range from 60 to 95 hp is ideal for a wide variety of
applications from property maintenance to commercial landscaping
and farming applications.
M8540 ROPS
MGX SERIES
The MGX Series delivers class-leading power and reliability.
With one of the largest cabs in its class, it offers unmatched
comfort and visibility. With models from 100 to 135HP the
MGX is a true utility tractor.
M110GX 27.6 FREE NET ROLLS P.A.
WITH ANY ROUND BALER
OFFER ENDS 30 APRIL 2018 *SEE TERMS & CONDITIONS BELOW
NEW KRONE
PRODUCTS! NEW
2018 COMP
R
RANGIEMA
COMPRIMA
BALECOLLECT
RX WAGON
ECF320MT
BIG M 450
2017
X T R E M E B I G PAC K
ECTC MOWERS
KWT1300
SWADRO TC640
SWADRO TC1000
ECR400
ZX WAGON
BIG X 480-630
NWEIDW NEW GREA
PLAIN T
RANG S
ER TO KUE NEW
S
WORH
T
KINGD
WIDANGE
SC RANCGE AUSTRBOTA
ALIA
R
PRE-SEASON SALE ENDS 30 APRIL 2018 – SEE YOUR DEALER TODAY!
KRONEAUSTRALIA.COM.AU
*Offer is only available for ABN holders who are using the equipment predominantly for business purposes. 0.9% p.a. finance rate, no repayments for the first
6 months then monthly repayments. Maximum term 60 months, a minimum of 20% deposit, minimum financed amount of $4,000 and no residual payments.
Terms, conditions, fees, charges and credit criteria apply. However, some fees may become payable depending on how the loan is conducted. Credit provided
by Kubota Australia Pty Ltd ABN 72005300621, Australian Credit Licence Number 442007. The offer expires on 30 April 2018, with finance application submitted
by 31 May 2018. Machine installation no later than 30/11/18..You can also read
