RFS LTE Solutions Enabling the communications revolution at the cell tower top - The Clear Choice
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
RFS LTE Solutions
Enabling the communications revolution at the cell tower top
T h e C l e a r C h o i c e ®
Efficiently migrate
to LTE technology
More than any other wireless innovation, Long Term Evolution (LTE) technology has the
capability to change the face of communications. It will provide the bandwidth and flexibility
to support more advanced services for business and consumer end users, thereby creating
new revenue opportunities for wireless network operators worldwide. As a result, operators
around the world are making plans to enhance their networks by integrating LTE technology.
Regular market updates by the Global mobile Suppliers Association (GSA) continue to
confirm a growing global commitment and support for LTE as the next generation mobile
broadband system of choice. And many operators are already building out their networks
and transforming them to take advantage of all the benefits LTE has to offer.
Based on an unrivaled knowledge of upgrading or replacing traditional base
wireless infrastructure, RFS’ proven station configurations with the latest
portfolio of lightweight, high performance distributed base station architectures.
RF equipment is optimized to provide the
best possible performance, compatibility All RFS solutions are the result of ongoing
and cost-effective longevity for the full investments in R&D and a close working
range of the most common bands, relationship with customers, which
applications and emerging technologies, ensure all products are designed to meet
including LTE (2.6G Hz and 700 MHz), the demanding network infrastructure
Cellular 850, GSM 900 and 1800, needs of today and the requirements of
RFS provides complete wireless PCS 1900, AWS and UMTS 2100. emerging communications standards.
infrastructure solutions that enable
an efficient migration to LTE. These This complete portfolio includes world
solutions offer an evolutionary class LTE solutions already deployed
path that keeps the real estate around the world, such as base station
changes at cell sites to an absolute antennas (BSAs), site optimization
minimum, while allowing operators products (SOPs), and microwave antennas.
to optimize each site for today’s It also includes innovative hybrid cabling
network technology, tomorrow’s LTE and connection solutions that make it
requirements, and beyond. easier to streamline operations when
RFS LTE SOLUTIONS
2
Optimize base station operations
One of the biggest challenges operators face is ensuring
their base stations can cost-effectively support a variety of
frequencies. The time, cost and risk associated with antenna
site evolution can negatively impact an operator’s bottom
line because replacing or adding antennas to accommodate
different technologies or frequencies delays time-to-market, is
expensive and can lead to difficult negotiations with landlords.
These challenges are of particular concern RFS offers antennas for all frequencies as
for operators moving to LTE, where well as feeder sharing solutions designed
allocated frequencies may be unknown to address the space and deployment
or may change from the trial stage to constraints operators will face as
the deployment stage. While LTE will they add LTE capabilities to their base
eventually be the prevailing technology stations. These solutions reduce the cost
across the entire spectrum, operators may associated with materials, site installation
want to take advantage of frequencies and ongoing operations, lower the
down to 1800 MHz, if and when risk of migration to LTE technologies,
spectrum becomes available. On the other and improve time-to-market with new,
hand, operators may want to use LTE at revenue-generating services. In addition,
700 MHz or 800 MHz to achieve specific they help operators optimize base station
market objectives. operations and maximize 4G investments
by reducing the loading on cell towers
and minimizing both leasing costs and
visual impact on the environment.
RFS LTE SOLUTIONS
3
Leverage a complete portfolio
of LTE antenna options
The complete portfolio of RFS LTE antenna solutions offers state-of-the-art base station
antenna options designed to meet the full spectrum of operator footprint, pattern, gain and tilt
requirements.
Low band antennas for Dual band antennas to High band broadband
capacity and precision reduce tower loading antennas for best-in-
class coverage
RFS Optimizer® low band antennas are For applications that require a minimum LTE network performance in the 2.6 GHz
designed to provide capacity, precision number of antennas at a cell site frequency band can be maximized with
and durability to support 700, 800 and to reduce tower loading RFS offers RFS Optimizer® high band broadband
900 MHz LTE operations. These high gain Optimizer® dual band antennas antennas. These variable electrical tilt
antennas are available in fixed electrical designed to operate at 790-960 and narrow and wideband antennas offer the
and variable electrical tilt configurations. 1710-2200 MHz frequencies. Available in perfect balance between energy efficiency
They are built to provide the best network variable electrical tilt dual polarization or and RF performance with advanced
performance and coverage and deliver side-by-side quad polarization versions, features, including a new dipole design,
a combination of reliability and growth- these antennas include premium improved radiating geometry, and a high
adaptability that ensure ongoing cost- performance features, including high performance phase shifter network. They
effective operation for small and large upper sidelobe suppression for reduced offer superior gain tracking and best-in-
operators alike. They feature: interference, excellent front-to-back class coverage to ensure optimal network
ratio, and performance stability across performance for advanced applications,
Low Passive Intermodulation (PIM), frequencies. while providing flexibility for future growth.
which eliminates system down-time,
guarantees high call quality and reduces
the number of dropped calls
Excellent upper sidelobe suppression,
which allows for high mechanical tilt
applications
Wideband frequency performance,
which enables a single antenna to be
used for a variety of applications, thereby
streamlining deployments
and reducing inventory
RFS LTE SOLUTIONS
4
Ultra-broadband antennas Multiband antennas
for ultra-flexible spectrum for multiple applications
support
RFS ultra-broadband antennas dramatically RFS also offers multiband antenna options
simplify antenna requirements by supporting engineered to help operators further reduce tower
a range of LTE-frequencies from 1710 to load and the environmental visual impact of multiple
2700 MHz on a single platform. Ready for antennas on a single tower. RFS multiband antennas
LTE testing today, they eliminate the need to optimize base station performance for LTE by
replace or add antennas as operators trial and reducing the total number of visible antennas from
deploy LTE services at different frequencies. two – and sometimes three or four – to just one. This
is achieved by co-locating multiple cross-polarized
Available in dual polarization or side-by-side antennas within a single antenna-sized radome. RFS is
quad polarization versions, these antennas continually expanding its multiband antenna portfolio
feature RFS premium performance: high with a variety of configuration options, including:
gain, high upper sidelobe suppression and
performance stability across frequencies. They also provide easy Dual band antennas:
adjustments, optional remote tilt, and a low-profile design to • 790-960 MHz with 2300-2700 MHz
minimize visual impact. The variable electrical tilt feature allows • Two 1710-2700 MHz ultra-broadband
the antennas to be
adjusted from zero Triple band antennas that combine:
to 12 degrees for • One low band with two high band in a 1.6 m, 2.1 m, or 2.6 m
enhanced precision enclosure
when controlling • One low band with two high band, which include one LTE 800 MHz
intercell interference. • One low band, one high band, and one 2.6, which includes 800
And the side-by- and 2600 MHz
side version gives
operators increased Quad band antennas :
flexibility to support • One low band, two high band, and one 2.6 GHz
multiple technologies,
seamlessly add capacity Hexport antennas:
and benefit from • Two high band and one 2.6 GHz
additional capabilities.
These multiband antenna options provide the widest RF
technology range to ensure optimal site fit-out flexibility,
RFS LTE SOLUTIONS
and are available with variable electrical tilt capabilities.
5
Improve coverage with
Tower Mounted Amplifiers
To enable operators to further optimize their base station
configurations, RFS offers an innovative Tower Mounted
Amplifier (TMA) platform specifically engineered for LTE
applications.
TMAs are used in wireless networks As one of the leading global suppliers
to improve coverage by boosting of TMAs, RFS supports the largest
base station sensitivity. Higher BTS operators and original equipment
sensitivity leads to better voice quality manufacturers. Its renowned TMA
and fewer dropped calls. Using a TMA portfolio covers all major bands and The twin TMA module consists of a one
can also improve bit rate coverage for applications, and the RFS 2600 LTE dual filter design with two low-noise
data transmissions, thereby enhancing TMA is designed to help operators 12 dB gain amplifiers and an auto-bypass
coverage and capacity. TMAs can also improve LTE coverage. function. It is available with an Antenna
be used to achieve cell enlargement, Interface Standards Group (AISG) detector
which allows operators to serve more The RFS 2600 LTE TMA uses a higher and interface towards the base station,
subscribers from the same BTS site, level of RF component integration and or a Current Window Alarm (CWA) base
ultimately generating additional a new filter tuning concept in a smaller, station interface, if required.
network revenue. lighter enclosure than traditional TMAs.
This advanced TMA design offers next-
E
generation performance with 30 percent
ANG
KR
WITHOUT TMA WN
LIN
NG
E DL fewer components, thereby reducing
DO RA GE
K
LIN AN
WITHOUTWITHOUT
TMA TMA UP INK R
N L E DL
UL total weight on a tower. And with fewer
W G
DO AN CONNECTED
KR
UP
LIN
UL
components, the 2600 LTE TMA offers
UL
CONNECTED
improved reliability because there are
UNBALANCED
LINK BUDGET UL
DISCONNECTED fewer points of potential failure.
RX COVERAGE AREA
UNBALANCED DISCONNECTED
LINK BUDGET TX COVERAGE AREA
RX COVERAGE AREA
Finally, as with all RFS TMAs, power
TX COVERAGE AREA
E
distribution units and bias-tees are
NG
RA
WITH TMA WN
LIN
K
AN
GE
DL available as part of a complete RFS
DO
K R NGE
LIN
UP INK R
L
A
UL solution.
WITH TMA DO
W N
AN
GE
DL
CONNECTED
KR
LIN
UP UL
WITH TMA UL
CONNECTED
CONNECTED
BALANCED UL
LINK BUDGET
RX & TX COVERAGE AREA
CONNECTED
BALANCED
LINK BUDGET
RFS LTE SOLUTIONS
RX & TX COVERAGE AREA
UL UPLINK (RX COVERAGE) DL DOWNLINK (TX COVERAGE)
6
ShareLite combiners
multiply deployment options;
divide the costs
RFS also offers diplexers and triplexers engineered
to allow several systems to use the same feeder
cable between the base station and the antenna.
With these combining solutions operators
can simultaneously reduce tower load while
achieving a corresponding cost savings through a
streamlined feeder cable arrangement.
RFS’ ShareLite Combining Solutions All ShareLite combiners are designed
efficiently support LTE migration on the cell to exceed industry standards and
tower, and are also backwards compatible have been field tested and proven
with 2G and 3G frequencies. The solutions’ in deployments around the world to
unprecedented compact design allows cell provide maximum performance under
tower installation on a swap-out basis, the most extreme operating and
boosting service capabilities while avoiding environmental conditions.
added weight to the site.
In addition, ShareLite’s very low insertion
loss limits the impact on total system loss,
ensuring high quality wireless cellular
services for years to come.
The complete line of lightweight ShareLite
combiners includes diplexers for all bands
(LTE700, cellular800, EDD, GSM900,
GSM1800, PCS, AWS, UMTS, LTE2.6). Each
unit offers extremely low insertion loss and 4 X CABLE DUAL BAND BROADBAND
optimized link budget performance, as well
as high protection against interference.
High power handling capabilities support
multiple simultaneous operators and MCPA
deployment, and the integrated DC-pass
option supports TMA and RET solutions.
RFS LTE SOLUTIONS
LOW HIGH LOW HIGH LOW HIGH
BAND BAND BAND BAND BAND BAND
7
HYBRIFLEX™
Designed for new RRH deployments
Engineered for maximum flexibility and reliability
RFS also offers innovative, This integrated cabling solution replaces which allows it to be installed like a
hybrid cabling solutions traditional multi-cable approaches, conventional coaxial RF cable. And it is
which require additional infrastructure designed to standard RF feeder diameters.
engineered to streamline components, long site installation times,
LTE base station operations. difficult implementation accessories and Therefore, commonly available RFS
HYBRIFLEX™ is the first training for installers who must work with CELLFLEX® LCF 1/2-inch and LCF 7/8-
hybrid cabling solution the delicate optical fiber. And it is available inch feeder accessories can be used in all
in 1-Sector or 3-Sector configurations to HYBRIFLEX™ installations. And to further
to combine optical fiber allow operators to connect up to three simplify installation, HYBBRIFLEX™ is
and DC power for Remote sectors with a single, composite cable. delivered pre-connectorized for fiber optic
Radio Heads (RRHs) in and DC converters.
a single, highly flexible, As a result, HYBRIFLEX™ provides the
cabling expenditure reductions, ease-of- To ensure lifetime reliability, the corrugated
lightweight aluminum installation and operational efficiency aluminum outer armor provides more
corrugated cable that mobile operators need to evolve their durable, lightweight protection than
allows operators to ground networks while limiting their power polyethylene tubes and at a much lower
the cabling system. It is consumption and carbon footprint cost than cable trays. This armor protects
at cellular sites. the power, fiber optic (multi-mode or
designed specifically for single-mode) and grounding cables
new RRH deployments and HYBRIFLEX™ is engineered to provide during and after installation. In addition,
base station upgrades. maximum flexibility at installation and a protective jacket on each individual
ongoing reliability long after installation cable pair ensures the inner cables
is complete. are suitable for outdoor use.
To simplify installation, the HYBRIFLEX™
corrugated aluminum outer armor offers
outstanding bending characteristics,
RFS LTE SOLUTIONS
PE external Optical cable (pair)
jacket with an internal jacket (PE)
Aluminium Power cable (pair)
OC with an internal jacket (PE)
8
Easily migrate to RRHs
with DC-FIT™ converter
Designed to reduce upgrade time and costs
Another key component Typically, upgrading or replacing old-style This innovative solution is available for
of the RFS portfolio of base stations with the latest base station coaxial cables with a 7/8”, 1-1/4” or
architecture requires operators to dismantle 1-5/8” nominal diameter and is already
RRH solutions is DC-FIT™, cell sites to install new fiber optics, DC in use around the world.
the world’s first Direct power cabling and equipment. This is
Current (DC) converter. time consuming and, in many cases, not By reusing existing, deployed coaxial cable
This solution dramatically acceptable because operators cannot to transport the DC voltage required by the
generate revenue from a site that is off-air. tower top RRH, operators can significantly
simplifies upgrades of reduce rollout planning and site preparation
existing wireless cell sites. With DC-FIT, operators can avoid time by up to 50 percent.
It makes it easier for disruptions in service and quickly migrate
operators to migrate to to RRH architectures by leveraging Upgrades are simplified because only two
existing base station hardware. The DC- DC-FIT converters are required per site.
base station architectures FIT converter is designed to connect a DC In addition, operators do not need to
that take advantage of cable with an existing coaxial cable run. It wait for permission from the base station
RRH configurations and features innovative technology that turns an site’s landlord to perform upgrades. Plus,
fiber optic technologies. existing coaxial foam dielectric feeder into a additional equipment, such as cherry pickers,
RRH power supply. As a result, upgrading a is not needed to install the converter. And
conventional coax site to RRH technology is the upgrade does not require an extension
a breeze, compared to the time-consuming of the cable path for the DC cable, or
installation of a new DC cable run. installation of fire protection in the form of
wall glands for the power cable.
As a result, DC-FIT allows operators to
perform upgrades where and when
they need them. This saves time,
money, and operational headaches.
Vodafone Germany
Leverages DC-FIT
for LTE
DC-FIT is being used by operators around the world to simplify
upgrades of existing wireless cell sites to RRH configurations. For example,
Vodafone Germany is leveraging the benefits of DC-FIT to leverage existing
base station hardware as part of its roll out of new technologies, including
4G LTE. More than 6500 units have been installed to date with more on their
way as the operator prepares its network to meet subscriber demand for
RFS LTE SOLUTIONS
premium services.
9
Improve backhaul performance
with microwave parabolic
antennas
A variety of backhaul antennas
Of course, any LTE technology The RFS portfolio of microwave antenna systems
includes a comprehensive suite of antennas designed
migration plan must also
to support tomorrow’s capacity requirements today.
consider the backhaul portion Advanced, single- or dual-polarized antennas in a
of the network. To truly deliver variety of sizes (1 to 15 ft) are available to support all
the advanced applications frequency bands between 3.6 and 80 GHz, and in
different performance classes (high, ultra-high and
and services subscribers will
high Cross Polar Discrimination (XPD) performance).
use and take advantage of
the business benefits LTE RFS CompactLine® antennas with RFS backfire
offers, operators must ensure technology feed systems provide an ultra-low-profile
with ultra-high performance in the 6 to 80 GHz
their backhaul networks
range (1 to 6 ft). These antennas can be customized
can efficiently support LTE with fittings to allow specific radios and hot-
multimedia and data traffic. standby couplers to be mounted directly on the
Based on an unrivalled history antenna. This eliminates the need for a waveguide
link between the tower-mounted antenna and
of research and design
equipment building, and simplifies integration
innovation, the RFS portfolio with OEM radio systems.
of microwave antenna systems
addresses all elements of the For network deployments that require larger
configurations, the RFS microwave antennas
RF chain for installers, OEM
product line offers large diameter antennas in
integrators and network 8ft to 15 ft sizes to accommodate 3.6 to 22 GHz
operators. It offers a true end- frequencies in all performance classes.
to-end, future-proof solution
All RFS antennas are available with a variety
set optimized for all popular
of options, such as advanced mounting
microwave radio bands and structures, wind load kits, sway bars, elliptical
engineered to deliver premium waveguides, and associated accessories,
electrical performance to including connectors, grounding kits and
pressurization equipment. With this total
meet the most stringent
package solution approach operators can
wireless transmission network quickly deploy the network upgrades
requirements. that will improve network efficiency.
RFS LTE SOLUTIONS
10New CompactLine® EASY A complete antenna
antennas for optimized portfolio
LTE backhaul performance
To truly enable operators to optimize LTE Together with the RFS High XPD antennas,
backhaul performance, RFS offers single- which are available in frequency ranges
and dual-polarized RFS CompactLine® from 4 GHz to 23 GHz and in sizes from
antennas specifically engineered to support 2 ft to 15 ft, RFS offers one of the most
LTE capacity requirements. complete microwave antenna portfolios
on the market. This enables operators
RFS CompactLine® dual-polarized antennas to address all relevant LTE backhaul
are available in a variety of sizes from 1ft to applications today and in the future.
6 ft. They support wideband frequencies up
to 11 GHz and narrow band frequencies up
to 38 GHz. In addition, for high frequency
band applications, RFS offers new single-
polarized RFS CompactLine® EASY 2 ft
antennas that can operate at 42 GHz and in
the E-Band (71-76 GHz and 81-86 GHz).
The RFS CompactLine® EASY antennas
are the most compact on the market.
They feature a new, deep dish
reflector design and compact mount
that results in a very low weight
configuration, which makes them
ideal for deployments where zoning
restrictions and tower loading are
key considerations.
RFS LTE SOLUTIONS
11Extend LTE indoors
with RFS wireless
indoor solutions
Complete indoor RADIAFLEX®
solutions portfolio optimized for LTE
To truly deliver an anywhere and RFS offers complete, best-in-class wireless indoor In addition, the RFS RADIAFLEX® suite of
everywhere LTE mobile experience solutions that are LTE-ready, and include a wide radiating cables features RFS’ patented
to end users, operators need range of RF broadband passive components for “higher order mode suppression
solutions that extend high quality all LTE indoor applications (2.6 GHz, 2.3 GHz, technique” in radiating cable design.
coverage where needed, outdoors 2.1 GHz, as well as 1900 MHz, 1800 MHz, 1700 / This unique design allows RFS to offer
and indoors. 2100 MHz, 1500 MHz, 900 MHz, 850 MHz, cables that support current and future
700 MHz, and 450 MHz): in-building commercial and private radio
The heart of an indoor network services from 698 MHz to 2700 MHz –
is typically a broadband passive World class CELLFLEX® and including LTE – for valuable cost savings.
distributed antenna system CELLFLEX® LITE low loss feeder cables
(DAS), which includes broadband
radiating cable or a distributed Leading edge, high performance
antenna network (RF cables, RADIAFLEX® radiating cables
splitters, couplers, and indoor Broadband and ultra-broadband
antennas). These networks provide indoor antennas
contoured RF coverage of a given
confined area. To support a variety Broadband and ultra-broadband,
of end user applications, they have low insertion loss, indoor passive RF
evolved to be ultra-RF broadband components (couplers, splitters)
and LTE ready, allowing all services
from 30MHz to 6GHz to share the These solutions are engineered to provide RADIALFEX® cables also ensure low
same passive distribution system. complete LTE coverage and: insertion loss and excellent coupling
performance. They feature halogen-free,
Wireless indoor solutions Support high data rate applications that will non-corrosive, low-smoke and flame-
also incorporate many active be an important source of revenue for operators retardant jacket material for safe and
components that must be fully reliable long-term cable operation.
functional in all frequencies Reduce costs of infrastructure deployments
and bandwidths. These include Prevent interference between technologies
repeaters and amplifiers to support and match environment constraints
RF-over-fiber systems, which
are used in larger buildings and Enable easy migration to future technologies
complexes where purely passive
infrastructure is insufficient. With these solutions, operators can benefit from
the most advanced wireless indoor technology
today, confident in the knowledge they can
evolve to LTE when the timing is right for their
RFS LTE SOLUTIONS
business – without purchasing new hardware.
12Support next-generation
traffic with high performance
transmission lines
Field proven and tested Low loss,
transmission line families high strength
Designing better RFS’ CELLFLEX® and CELLFLEX® Lite make The RFS portfolio of LTE transmission
performing, more durable up the largest corrugated transmission line solutions also includes a complete
line portfolio in the wireless infrastructure selection of low loss, high strength
and lighter cables is part industry. These foam dielectric feeder CELLFLEX® Factory Fit jumpers designed
of RFS’ long tradition of cables provide a reliable and technically to provide maximum performance
innovation leadership. superior solution when used as backbone between transmission lines and antennas
Today, RFS provides feeders in cellular radio systems, including or system equipment.
GSM, UMTS, CDMA, PDC, WiMAX, and
transmission line solutions LTE. In addition, they can be used for They provide excellent contact force, low
for any RF application cable antenna arrays, radio equipment and stable intermodulation and superior RF
and deployment scenario. interconnections and jumper assemblies. screening, as well as reduced attenuation
These end-to-end and low loss in super flexible 1/2”, flexible
To enable quick and hassle-free installation, 1/2”, and ultra-flexible 7/8” versions
solutions are designed CELLFLEX® and CELLFLEX® Lite combine in a variety of lengths and connector
and engineered to support remarkable flexibility with high strength and combinations featuring N-type and 7-16
the next-generation superior electrical performance. Plus, the DIN connectors. Other cable and connector
of voice and data-rich entire portfolio is backed by a complete line types are available upon request.
of accessories, which includes the industry-
wireless services that will leading RFS OMNI FIT™ connectors. RFS also offers phase stabilized versions
be enabled by LTE. to reduce phase drift with temperature,
and phase matched groups to enable
connections to antenna arrays and support
“quasi omni” configurations.
RFS LTE SOLUTIONS
13LTE solutions that cover
the entire RF-chain
With over 50 years of design and
development experience, RFS provides
the most comprehensive portfolio
of LTE site solutions in the industry.
Our LTE offerings cover the entire
RF chain, from base station antennas
to diplexers and triplexers, feeders,
jumpers and tower solutions.
Based on unrivaled knowledge of wireless
infrastructure, RFS has a clear vision of its customers’
LTE site optimization needs. That knowledge is
matched with extensive experience with LTE trials
and deployments worldwide. And it is backed
by field tested and proven products optimized to
help customers take full advantage of the business
opportunities enabled by the improved bandwidth
and flexibility LTE offers.
With RFS, wireless network operators can efficiently
migrate their networks to LTE while keeping the
real estate changes at cell sites to an absolute
minimum. This enables operators to optimize each
site for today’s network technology, tomorrow’s LTE
requirements, and beyond.
RFS LTE SOLUTIONS
14Why RFS?
A worldwide leader in wireless
and broadcast infrastructure
Serious about services A tradition of innovation
Customers know they can count on RFS For over a century, RFS has been at the
for comprehensive logistical capabilities, forefront of the wireless communication
flawless execution and outstanding industry through its unwavering commitment
technical skills and support. The company’s to design and develop the world’s most
dedicated shipment coordinators, hotline advanced technology in the field. Dedicated
staff and on-site engineers go well beyond R&D teams, along with a privileged
mere technology, striving to offer tailored partnership with Bell Labs, are at the source
solutions to meet even the most complex of breakthroughs that are ensuring the
site-engineering and delivery challenges. mobility of an increasingly wireless world.
Radio Frequency Systems
(RFS) is a global designer and
RFS’ value-added services match the RFS is at the frontier of wireless technology
manufacturer of cable, antenna
exact needs of business partners large innovation, sustaining the boldest ventures
and tower systems, along
and small. to enhance the way people communicate
with active and passive RF
and live.
conditioning modules, providing
total-package solutions
for wireless and broadcast
infrastructure. Ever-present quality A truly global
guarantee company
RFS serves OEMs, distributors,
systems integrators, operators
From design to manufacture, ISO 9001 With on-the-ground personnel in more
and installers in the broadcast,
and ISO 14001 certification standards than 20 countries and on every continent,
wireless communications, land-
encompass all aspects of RFS’ business RFS always delivers on its commitments,
mobile and microwave market
worldwide. Every product RFS ships has providing a comprehensive range of
sectors.
stood up to the most stringent technical, premium products, systems and services. Its
environmental and quality control tests, clients benefit from all the advantages of a
As an ISO-compliant organi-
continuously meeting and surpassing global supplier, while relying on dedicated
zation with manufacturing
the expectations of a long list of wireless support from RFS’ local engineering,
and customer-service facilities
carriers, transportation and utility operators, manufacturing and shipping teams.
that span the globe, RFS offers
and broadcasters.
cutting-edge engineering
RFS’ products, systems and personnel can
capabilities, superior field
RFS backs every product bearing its name be found in every corner of the planet.
support and innovative product
with a quality guarantee that is unrivaled in As a global group, RFS is committed
design.
the market. to upholding the most stringent
environmental, health and safety standards,
and seeks to integrate green initiatives in
RFS LTE SOLUTIONS
every aspect of its business.
15For more information, please contact
the nearest RFS sales office:
Southern Europe, Middle East, Africa & India
www.rfsworld.com/sales/semeai
Northern Europe
www.rfsworld.com/sales/euno
Latin America
www.rfsworld.com/sales/latam
North America
© Radio Frequency Systems - 05/2011
www.rfsworld.com/sales/na
Asia Pacific
www.rfsworld.com/sales/apac
T h e C l e a r C h o i c e ®
www.rfsworld.comYou can also read
