Roofing System Solutions Brochure - (COMGN100) Updated: 6/14
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Roofing System Solutions
Brochure
(COMGN100)
Updated: 6/14
gaf.com
ROOFING SYSTEM
SOLUTIONS
ASPHALTIC L IQUID -A PPLIED SINGLE-PLY INSUL ATION
gaf.com
Quick Guide To GAF Roofing Systems
= Top Performance
C
= Excellent Performance hoosing the right roofing system for an application
can be complicated. There are many roof
= Good Performance membrane options, and each property may
have its own set of unique requirements. So, how do
= Not Recommended you choose the right roofing system for your property?
= Not Available ASPHALTIC
(Ratings based on GAF estimates Ruberoid®/Liberty™ Ruberoid® GAFGLAS® CompositeRoof™
and contractor interviews) SBS Modified Bitumen APP Built-Up Asphalt
Modified Roofing Composite
Bitumen
d
ce
fa
d
d
ur
re
lie
Ad ™
-S
he
lf- ty
pp
Desired
al
Se iber
-A
el
er
h
h
h
av
op
op
ld
rc
rc
rc
in
L
Co
To
To
To
Gr
M
M
Characteristic
M
Multi-Layered
Membrane Protection
Flexes To Conform To
Roof Movement
Low Maintenance
Light Reflective For 3 3 3 3 3 3
Energy Savings
Puncture/Leak
Resistant
Easy To Repair
After Installation
Heat-Welded, Self-Adhered,
Torched, Cold-Applied,
Or Mopped Seam Strength
Grease/Oil/Chemical
Resistant1
Can Be Installed
In Cold Weather
High Heat and UV
Resistance
Maximum Guarantee Length In Years* 20 20 20 20 20 20 20 20 20
*Note: For complete details, restrictions, requirements,
terms, and conditions, please refer to official guarantee See applicable GAF guarantee for specific exclusions
1 3
Requires the use of EnergyCap™ Products
document and applicable GAF specification manual. Rating is for solvent-based products only
2 4
May require that installation adhesive be pre-heated
2
Choose The Right Company Choose The Right Roof To Fit Your Needs
GAF is North America’s largest roofing manufacturer. Listed below is a selection chart to help with some of the
We manufacture products that provide more solutions than physical performance criteria of individual products, but
any other roofing manufacturer. We’re not vested in a single there are other important considerations as well. Having
technology; our broad product offering is designed to help a good understanding of your investment objectives
you select a roofing system that is right for your property. (e.g., long term or short term), property use (e.g., the
importance of aesthetics or amount of roof traffic),
Choose The Right Team To Work With location (e.g., inner city or desert), and the overall
GAF’s commercial roofing team can guide you in system building construction will help ensure the best choice.
choice, preparation of design materials, construction
details, specification preparation, and more! Contact GAF’s
Architectural Services Team at 1-800-522-9224 or see the
back cover of this brochure for your local sales office.
LIQUID-APPLIED SINGLE-PLY
TOPCOAT® EverGuard EverGuard® TPO EverGuard® Freedom™ EverGuard®
Roof Restoration Extreme® TPO TPO TPO PVC
Fleece-Back
ed
ed
ch
ch
ta
ta
de g,
ly
At
At
s
lly
lly
c
el rin
of
-P
lti
d
d
lly
lly
d
d
d
ed ca
ed ca
d®
d®
Ro
re
re
-W he
s le
s a
re
re
ca
ca
of ph
ch ni
ch ni
he
he
of ing
at Ad
he
he
on
on
al
ta a
ta a
ni
ni
s
Ad
Ad
At ch
At ech
et
Ad
Ad
He elf-
Ro r A
Ro r S
oB
oB
ha
ha
rM
e
lly
lly
in
in
Fo
Fo
ec
ec
lly
lly
M
M
S
Rh
Rh
Fu
Fu
Fo
M
M
Fu
Fu
2 4 4
20 10 10 35 30 35 30 25 30 30 25 20 20 20
3ASPHALTIC ROOFING
Ruberoid Modified Bitumen Roofing
®
Ruberoid® membranes offer greater flexibility,
impact resistance, strength, and system compatibility
Applications...
For premium, fire-rated systems, specify
Ruberoid® Torch FR, Ruberoid® Mop FR, or Ruberoid® Torch Granule
Ruberoid® SBS Heat-Weld™ Plus FR membrane. Ruberoid® Torch Smooth
GAFGLAS® #75 Base Sheet
Now available in an ENERGY STAR® qualified*,
CRRC rated version, EnergyCap™ 30 FR and Hot Asphalt
EnergyCap™ Torch Plus FR combine the proven EnergyGuard™ Perlite
performance of Ruberoid® membranes with Drill-Tec™ Fastener
EnergyCote™, a pre-applied premium reflective ™
EnergyGuard Polyiso Insulation
TOPCOAT® white elastomeric coating. Deck
For standard applications, new or retrofit, as * ENERGY STAR only valid in the USA.
®
well as flashing and repairs to existing built-up
roofs, GAF offers its proven Ruberoid® Torch
membranes (smooth or granule-surfaced), TYPICAL 3-PLY TORCH-APPLIED SYSTEM USING BUR BASE SHEET
Ruberoid® Mop membranes (hot- or cold- AND PREMIUM APP MODIFIED BITUMEN MEMBRANES
applied), or Ruberoid® SBS Heat-Weld™
membranes (heat-weldable).
For a two-ply modified bitumen system that is
durable and economical, specify Ruberoid® 1 All figures are approximate.
val
2 Refer to www.ul.com for
20/30 FR (fiberglass-reinforced membranes).
pr o
ied
specific approvals.
Ap
n t li f
),
3 Refer to http://roofnav.fmglobal.com
Ruberoid Modified
t er
li a u a
®
a s o l y r)
nt y
.)* e
ht 1
mp Q
for specific approvals.
s)] es
yr s bl
r gl . P s t e
ils) 1
Co AR ®
ou
e ( a il a
eig
* Guarantee duration based
Bitumen Membrane
ib e em l ye
eC
d
val 3
val 2
f t) e W
n t e Av
(m
ed
d
on installation by Factory-
li e
24 ST
F ( F (Pr (P o
li e
ad
ne e
pli
pp
Certified Contractor in
a r a um
pr o
ss
ick an
/sq a n
pr o
Selection Guide
pp
le Y
P P a t [P
i-D
Ap
T i t ERG
h -A
approved system.
T hembr
(lb br
Gua x im
p -A
Ap
Ap
TM
am
ld-
m
rc
M
C
EN
IC C
I
Mo
FM
Me
TD
AS
UL
Co
APP FB
Mi
To
M
M
Ruberoid® Torch Smooth u 15 0.8 153 P u u u u u u D6222 Type I Grade S
Ruberoid® Torch Granule u 15 1.0 177 P u u u u u u D6222 Type I Grade G
Ruberoid® Torch FR u 20 1.2 170 PP u u u u u u D6222 Type II Grade G
Ruberoid® EnergyCap™ Torch Plus FR u 20 1.5 170 PP u u u u u D6222 Type II Grade G C1549, E408
Ruberoid® EnergyCap™ Torch Granule FR u 15 1.0 160 P u u u D6222 Type I Grade G C1549, E408
SBS
Ruberoid® Mop Granule u u 15 1.0 140 P u u u u u u D6164 Type I Grade G
Ruberoid® Mop Smooth 1.5 u u 20 0.9 90 P u u u u u u D6164 Type I Grade S
Ruberoid® Mop 170 FR u u 15 1.0 155 P u u u u u u D6164 Type I Grade G
Ruberoid® Mop FR u u 20 1.0 155 PP u u u u u u D6164 Type II Grade G
Ruberoid® EnergyCap™ Mop FR 20 1.0 155 PP u u u u u u u D6164 Type II Grade G C1549, C1371
Ruberoid® 20 u u 15 0.6 85 F u u u u u u D6163 Type I Grade S
Ruberoid® 30 u u 15 0.9 140 F u u u u u u D6163 Type I Grade G
Ruberoid® 30 FR u u 15 0.9 140 F u u u u u u D6163 Type I Grade G
Ruberoid® EnergyCap™ 30 FR u u 15 1.0 140 F u u u u u u D6163 Type I Grade G C1549, C1371
Ruberoid® Dual Smooth u u 20 1.0 138 P/F u u u D6162 Type I Grade S
Ruberoid® Dual FR u u 20 1.0 164 P/F u u u u D6162 Type I Grade G
Ruberoid® Ultraclad® SBS (Aluminum) u u 20 1.0 160 F(scrim) u u u D6298
Ruberoid® Mop Plus Smooth u u 20 0.7 120 PP u u u u u u D6164 Type II Grade S
Ruberoid® SBS Heat-Weld™ Granule u 15 1.0 165 P u u u u u D6164 Type I Grade G
Ruberoid® SBS Heat-Weld™ Smooth u 20 1.0 165 P u u u u u D6164 Type I Grade S
Ruberoid® SBS Heat-Weld™ 25 u 20 0.6 98 F u u u D6163 Type I Grade S
Ruberoid® SBS Heat-Weld™ 170 FR u 15 1.0 160 P u u u u u D6164 Type I Grade G
Ruberoid® SBS Heat-Weld™ Plus u 20 1.0 165 P u u u u D6164 Type I & Type II Grade G
Ruberoid® SBS Heat-Weld™ Plus FR u 20 1.0 165 PP u u u u u D6164 Type II Grade G
Ruberoid® EnergyCap™ SBS Heat-Weld™ Plus FR u 20 1.0 165 PP u u u u u D6164 Type II Grade G E1549, C1371
See Low-Slope Product Data Guide and current Application & Specifications Manual for a complete list of products.
Liberty Self-Adhering
™ Most Ruberoid® products meet the physical requirements of ICC AC75.
Liberty™ Base/Ply Sheet Specifications (nom.) Liberty™Cap Sheet Specifications (nom.) Liberty™ MA Nailed Base Sheet
• Roll length is 66 ft. (20.1 m) • Roll length is 34 ft. (10.4 m) Specifications (nom.)
• Roll width is 39.375 in. (1.0 m) • Roll width is 39.375 in. (1.0 m) • Roll length is 66 ft. (20.1 m)
• Roll size is 2 squares, 216 sq. ft. (20.1 m2) • Roll size is 1 square, 112 sq. ft. (10.4 m2) • Roll width is 39.375 in. (1.0 m)
• FM Approved, UL Classified • FM Approved, UL Classified • Roll size is 2 squares, 216 sq. ft. (20.1 m2)
• State of Florida Approved • State of Florida Approved • FM Approved, UL Classified
• Miami-Dade County Approved • Miami-Dade County Approved • State of Florida Approved
• Texas Dept. of Insurance (TDI) • Texas Dept. of Insurance (TDI) • Miami-Dade County Approved
4ASPHALTIC ROOFING
GAFGLAS BUR
®
GAFGLAS® BUR helps to reduce installation costs while
tackling the most demanding roof applications
Metric-Sized Rolls For Lower Slag or Gravel in Asphalt
Installed Cost...
All GAFGLAS Plies are produced in
®
GAFGLAS® FlexPly™ 6 Plies with Roofing Asphalt
metric-width rolls, allowing faster application
and resulting in lower installed cost. GAFGLAS® Stratavent® Eliminator™
Perforated Venting Base Sheet with Roofing Asphalt
GAFGLAS® Roofing Plies... incorporate
the latest in fiberglass ply technologies for Roofing Asphalt
high tensile strength, dimensional stability, EnergyGuard Polyiso Insulation
™
optimum porosity for air escape while
mopping, excellent wind-uplift resistance, UL Deck
Class A fire ratings, and a FM uplift rating
up to Class 1-720 when solidly mopped to
a primed, insulated structural concrete deck: TYPICAL 4-PLY PREMIUM SYSTEM WITH
AFGLAS ® FlexPly™ 6 Ply Sheet
•G GAFGLAS ® STRATAVENT® ELIMINATOR™,
premium-performing FLEXPLY ™ 6, FLOOD COAT, AND GRAVEL
• GAFGLAS ® Ply 4
GAFGLAS® Base Sheets... GAFGLAS® Mineral-Surfaced Cap Sheet...
offer solutions for every application: Surfacing options:
• GAFGLAS ® #75 Base Sheet for economical applications •G
AFGLAS ® Mineral-Surfaced Cap Sheet... Provides a UL Class
A rating for use as a surface ply in hot-applied roof systems and
AFGLAS ® #80 Ultima™ Base Sheet features a heavyweight
•G as a top ply in base flashing construction without the need for
construction that is ideal for all premium roofing and flashing additional surface coatings
systems
AFGLAS ® EnergyCap™ BUR Mineral-Surfaced Cap Sheet...
•G
AFGLAS ® Stratavent® Eliminator™ Base Sheets suitable
•G Now a mineral-surfaced cap sheet with a pre-applied, highly
for new and reroof applications when a venting base sheet reflective coating of TOPCOAT® EnergyCote™ Elastomeric
is needed Coating for the highly reflective membranes required by
California’s Title 24
val
d/
pro
nt ifie
Ap
li a u a l
GAFGLAS® Built-Up
ty
yr s ble
mp Q
f t)
un
Co R ®
e ( a il a
)
/sq
Co
Roofing Materials
s)
val 3
24 TA
val 2
n t e Av
e c(
lb s
de
le Y S
pr o
ar a m
a
Sp
Selection Guide
pr o
t 1(
oll 1
i-D
T i t ERG
Gu x imu
ce
Ap
i gh
TM
Ap
am
s /r
r fa
C
EN
IC C
I
We
FM
AS
Sq
Mi
Ma
TD
Su
UL
FB
BASE SHEETS
GAFGLAS ® #75 Base Sheet 20 .185 3 Smooth u u u u u u D4601 Type II
GAFGLAS ® #80 Ultima™ Base Sheet 20 .303 2 Smooth u u u u u u D4601 Type II
GAFGLAS ® Stratavent® Eliminator™ 20 .55 1.25 Smooth u u u u u u D4897 Type II, D3672
Nailable Venting Base Sheet
GAFGLAS ® Stratavent® Eliminator™ 20 .53 1.25 Smooth u u u u u D4897 Type II, D3672
Perforated Venting Base Sheet
PLY SHEETS
GAFGLAS ® Ply 4 12 .06 5 Smooth u u u u u u D2178 Type IV
GAFGLAS ® FlexPly™ 6 20 .063 5 Smooth u u u u u u D2178 Type VI
SURFACE SHEETS
GAFGLAS ® Mineral-Surfaced 20 .63 1 Granule u u u u D3909
Cap Sheet
GAFGLAS ® EnergyCap™ BUR 20 .73 1 Granule u u u u u D3909, C1549, C1371
Mineral-Surfaced Cap Sheet
1
All weights and sizes are approximate. 2 Refer to www.ul.com for specific approvals. 3 Refer
to http://roofnav.fmglobal.com for specific approvals.
For technical information, visit our website at gaf.com or call 1-800-ROOF-411 (1-800-766-3411).
Most GAFGLAS® products meet the physical requirements of ICC AC75. Contact Technical Services for specific listings.
5ASPHALTIC ROOFING
GAF CompositeRoof Systems
™
GAF CompositeRoof ™ Systems exhibit exceptional strain
energy for long-lasting, reliable roofing system performance
The strength of BUR, the
Ruberoid® Mop Plus Granule
flexibility of modified
bitumen...
GAF continues its tradition of GAFGLAS® FlexPly™ 6 Plies with Roofing Asphalt
innovation with GAF CompositeRoof™
systems that can: GAFGLAS® Stratavent® Eliminator™ Perforated
Venting Base Sheet with Roofing Asphalt
•C
ombine the strength of premium
GAFGLAS ® built-up roofs with
the elongation and flexibility of Drill-Tec™ Fastener
Ruberoid® Modified Bitumen ™
EnergyGuard Polyiso Insulation
Membranes Deck
•E
xhibit tensile strengths up to 300
lbf/in and strain energies as high
as 70 lbf-in/in2 at 0°F!
TYPICAL 4-PLY MOP-APPLIED SYSTEM USING PREMIUM BUR
Every GAF CompositeRoof™ System AND SBS MODIFIED BITUMEN MEMBRANES
includes at least:
• One ply of premium GAFGLAS ®
BUR for strength
• Three total layers of roofing plies/
membranes for system redundancy
and long-term reliability GAF CompositeRoof Systems
®
• The use of at least one layer of “GAF CompositeRoof® systems exhibit exceptional strain energy
polyester-reinforced Ruberoid® for long-lasting, reliable roofing system performance”
Modified
S base sheets...offer solutions Bitumen Membrane
for every
Typical Strain Energy Chart For example, Specification I-2-1-MGP provides more than
:
to ensure superior flexibility and
AS #75 Base Sheet for economical applications
®
10 times the elongation at 0°F of typical built-up roofing.
AS #80 Ultima Base Sheet
®
elongation
™
characteristics
features a heavy-
onstruction that is ideal for all premium roofing
SYSTEM (lbf-inch/inch @0°F)
Exceptional strain energy...GAF
2 CompositeRoof
systems far exceed either BUR or modified bitumen
systems in strain energy, one of the most advanced
hing systems ™
For example, Specification I-2-1-MGP
AS® STRATAVENT® Eliminator™ Base Sheets GAF CompositeRoof Systems
Typical 4-Ply Mop-Applied System Using Premium
45
measures of mechanical performance. This combines
the measurement of tensile strength and elongation in
provides more than 10 times the
for new and reroof applications when a
base sheet is needed. UL Class A requirements
BUR and SBS Modified Bitumen Membranes
a single parameter to indicate whether a roof system has
elongation at 0°F of typical built-up
VENT Eliminator™ Nailable base sheet and 4 plies
The strength of Type
of BUR, VI fiberglass
the flexibility of modified 9
the tensile strength necessary to withstand normal roof
stresses and the elastomeric properties to accommodate
VENT Eliminator™ Perforated) bitumen...GAF continues its tradition of innovation
roofing.
S Mineral Surfaced Cap Sheet... with GAF CompositeRoof systems, the next generation
®
normal building movement.
options: 2 plies fiberglass-reinforced
in roofing. CompositeRoof systems: 5
Include RUBEROID® EnergyCap™ in your CompositeRoof
and achieve an ENERGY STAR® qualified, CRRC qualified
AS® Mineral Surfaced Cap Sheet... • combine the strength of premium GAFGLAS® built-up
Exceptional strain energy...
a UL Class A rating for use as a surface ply mop-applied MB membranes
roofs with the elongation and flexibility of RUBEROID® system with proven performance of a GAF CompositeRoof
system.
plied roof systems and as a top ply in base modified bitumen membranes
GAF CompositeRoof Systems far
construction without the need for additional
™
• Exhibit tensile strengths up to 300 lbf/in and strain
Typical Strain Energy Chart
coatings.
AS EnergyCap Mineral Surfaced Cap Sheet...
® ™ exceed either BUR or modified Base sheet and torch-applied MB
energies as high as 70 lbf-in/in2 at 0°F!
SYSTEM
12 (lbf-inch/inch @0°F) 2
Every GAF CompositeRoof system includes at least:
bitumen systems in strain energy,
mineral surface cap sheet with a pre-applied,
flective coating of EnergyCote™ elastomeric
membrane
• one ply of premium GAFGLAS BUR plies for strength GAF CompositeRoof® systems . . . . . . 45
• three total layers of roofing plies/membranes for system 4 plies of Type VI fiberglass . . . . . . . 9
rnia’s Title 24
one of the most advanced measures
or the highly reflective membranes required redundancy and long-term reliability 2 plies fiberglass-reinforced
• the use of at least one layer of polyester-reinforced mop-applied MB membranes . . . . . . . 5
of mechanical performance. This RUBEROID modified bitumen membrane ensures Base Sheet and torch-applied
4
combines the measurement of tensile
ed
superior flexibility and elongation characteristics MB Membrane . . . . . . . . . . . . . . . . 12
2
ov
itle
lia STA EA
pr
/T
strength and elongation in a single
M
Ap
nt R ®
ty
al 3
al 2
nty
Ci
ov
parameter to indicate whether a
ov
ou
rk
pr
mp Y
pr
Yo
C
Co ERG
Ap
Ap
de
w
roof system has the tensile strength
C
C
I
FM
Ne
EN
Da
TD
UL
FB
IC
u
u
u
u
u
u
u
u
necessary
u
u
u
u
to withstand normal roof
u u u u stresses and the elastomeric properties
u u
u u u u to accommodate
u normal building
movement.
u u u u u u u
u u u u u u u
u u u u
u u u Pending u
er to current GAF Application and Specifications Manual or FM Directory for specific approvals.
ROOF-411 (1-800-766-3411)
Contact Technical Services for specific listings. To locate an authorized contractor, call your local regional office (see back cover) 5
178234GAF_Full Line_R1.indd 5 4/7/09 11:48:55 AM
6TOPCOAT Liquid-Applied Solutions
LIQUID-APPLIED ROOFING
®
Protects and maintains new roofing systems Title 24
& restores deteriorating low-slope roofs Compliant
ENERGY STAR®
only valid
in the USA
Superior, SeamFree™ The Industry Standard... show that the TOPCOAT® Membrane
Protection... Originally designed TOPCOAT® has become an industry exceeds the ENERGY STAR® program’s
specifically for the renovation and leader through strict and consistent minimum reflectivity by over 40%—thereby
waterproofing of existing metal roofing, adherence to the highest quality standards. reducing the surface temperature of a roof
the TOPCOAT® System is one of today’s Our chemists work closely with research by as much as 60°F when compared to a
most advanced—and most relied upon— and testing facilities, such as FM Approvals typical black low-slope roof. TOPCOAT‘s
roofing restoration systems. TOPCOAT® and Underwriters Laboratories, to develop exceptional resistance to dirt pick-up,
also offers a full line of membrane systems standards for the retrofit of metal and combined with regular standard roof
to restore most existing low-slope roof low-slope roofing. In addition, our sales maintenance, will ensure a highly reflective
types, including BUR, modified bitumen, and technical teams have been trained, surface for the life of the roof system.
and EPDM. TOPCOAT® is a liquid-applied not only in every detail of the TOPCOAT® TOPCOAT® FireShield® System...
system, installed in several stages to form system, but in the construction of roof Provides maximum fire protection and
a flexible, SeamFree™ membrane over the restoration systems as well. Nationally, energy savings instantly. The unique
entire roof. It protects, is fully adhered to the TOPCOAT® System is installed by a technology of FireShield® is formulated to
the existing roof surface, is highly elastic, network of trained professional roofing provide maximum fire protection, increase
and bonds tightly to most substrates: contractors. a roof’s reflectivity, and protect the roof
• Stays flexible to -30°F after curing TOPCOAT® Systems Reduce Your substrate from harmful ultraviolet rays.
•S tandard reflective white can reduce Roofing Life Cycle Costs... Building fires cause property damage
roof surface temperatures up to 60°F* An effective roof maintenance program in excess of $12 billion and claim the
• Available in 9 standard and 7 combined with a TOPCOAT® system can lives of almost 3,000 innocent victims
preformulated colors, and unlimited greatly reduce life cycle costs for most annually.*** Regrettably, combustible
custom colors roofing systems. roofing systems play a part in these
• Backed by a comprehensive system tragedies. As North America’s largest
warranty up to 20 years on metal Energy Savings... Several independent
roofing manufacturer, we take fire safety
roofs** testing facilities agree that a long-term
seriously. That’s why we’ve developed
reflective roof can decrease cooling
It’s the premier solution for the most FireShield®, the first “self-extinguishing” roof
costs by as much as 21% per year, or
complex and demanding installations: restoration system. Special fire-resistant
more! TOPCOAT® is an ENERGY STAR® -
• Innovative SeamFree™ construction ingredients in the product react with heat
qualified product, is Title 24 compliant,
means no laps to separate or cause and fire, causing a chemical reaction to
and meets the stringent standards set
leakage occur. A non-combustible carbon char
by the Cool Roof Rating Council for
• Exceptional flexibility and value layer is formed that retards the flame
solar reflectance and thermal emittance.
• A versatile solution for the protection propagation by reducing available
TOPCOAT’s ENERGY STAR® -qualified Roof
of new roofs and the problem of oxygen.
Membrane is rated as providing an initial
aging roofs reflectivity of 85%, and 3-year studies
*Depending on location of facility.
**See system warranty for complete
coverage and restrictions.
***Source: National Fire Protection
Association, 2012 data.
TOPCOAT® Membrane (white or color)
TOPCOAT® Membrane (gray)
TOPCOAT® Flashing (Brush or Spray Grade)
TOPCOAT® Flashing Fabric
TOPCOAT® Flashing (Brush or Spray Grade)
Metal Roof Panel For More Information
About Cool Roof Products,
Visit Green Roof Central
LIQUID-APPLIED MEMBRANE SYSTEM at gaf.com/green
(TYPICAL METAL APPLICATION)
To locate an authorized contractor, call your local regional office (see back cover). visit TOPCOAT.com
7SINGLE-PLY ROOFING
EverGuard Single-Ply Roofing Systems
®
EverGuard® Systems are your best and safest choice in single-ply roofing
If you are a facility manager, building owner, architect, or • Freedom™ Self-adhering TPO... with RapidSeam™
roofing contractor who has experienced the advantages of technology combine the superiority of EverGuard® TPO
single-ply roofing systems, you owe it to yourself to consider Membrane with a factory-applied adhesive. RapidSeam™
EverGuard® Single-Ply Roofing Systems from GAF. technology has taken self-adhered membranes to the next level,
offering a 6” self-adhering seam and providing factory-applied
GAF thermoplastic membrane options include: adhesive for superior strength.
• EverGuard® TPO... combines the weatherability of EPDM • Freedom™ HW TPO... combines the convenience of self-
with the reflectivity and seam strength of PVC—at a price adhered membranes with a traditional heat-welded seam, so
you’ll love. (To save time, EverGuard® Freedom™ TPO where heat-welded seams are desired, both Freedom™ HW and
Self-adhering Membranes make installation easy and save EverGuard® TPO can now be considered.
you time and money.) • EverGuard® PVC... offers the advantages of heat-welded
• EverGuard Extreme® Advanced Protection® TPO... seams and high reflectivity, plus superior resistance to chemicals,
offers exceptional performance in all applications, including oils, and greases.
high heat and solar.
When You Figure In The
Hidden Energy Savings, White
Total Estimated Energy Savings Of A 500 Square EverGuard®
EverGuard® TPO And PVC
Or Freedom™ TPO Or PVC Roof Over 15 Years*
Systems Significantly Reduce (Based on data from Oak Ridge National Laboratory, U.S. Dept. of Energy; assumes R-value of 12.5)
Your Roofing Life Cycle Costs! Chicago, IL
With a lifetime average solar reflectance $20,250
of 65%, EverGuard® and Freedom™ TPO
Sacramento, CA
and PVC Membranes can reduce the New York, NY
surface temperature of your roof by as $41,250
$33,750
much as 60°F (versus a typical black
roof).** This can translate into big savings
on utility costs over the life of the roof—as
much as $30,000 or more, depending Houston, TX
Miami, FL
on where your facility is located. More $38,250 $61,500
and more facility owners are asking
themselves, “Why get saddled with an
energy-wasting black roof when I can To calculate the savings in other cities, visit the Oak Ridge National Laboratory
install an energy-efficient EverGuard® or website at: http://www.ornl.gov/sci/roofs+walls/facts/CoolCalcEnergy.htm
Freedom™ TPO or PVC roof instead?”
Depending on your location, an For technical information, visit our website at gaf.com or call
energy-saving EverGuard® TPO or PVC 1-800-ROOF-411 (1-800-766-3411)
roof could offset as much as 30% or
more of the cost to install that roof!
*Energy savings estimates are based on energy and fuel cost data provided by ORNL website at the time of print and does not take into consideration energy cost fluctuations over time.
Assumptions used in the savings calculations include: R-value of 19; infrared emittance of 90; COP of 2; solar reflectance of 76%; average heating system efficiency. The results are
examples—type of building, geographical locations, and your exact energy/fuel costs as well as other factors must be considered for your specific situation.
**Depending on location of facility.
To locate an authorized contractor, call your local regional office (see back cover).
8SINGLE-PLY ROOFING
Product Spotlight:
EverGuard Extreme® TPO Delivers Advanced Protection For Your Property
EverGuard Extreme® is a breakthrough (patent-pending) in TPO roofing membrane
150 technology. It not only results
1.00 in next-
generationEverGuard Extreme vs. Standard TPO Membranes
performance against heat aging and UV degradation (the two 125
®
In 280ºF Heat-Aging Tests...
key performance characteristics directly related to
roof200
system longevity), but also exceeds all key ASTM standards for TPO membranes. Why settle for standard0.75
TPO when you
Days to Cap Cracks w/280°F Oven Aging
100
can get the advanced protection of EverGuard Extreme TPO for your property?
®
lbf 75 % 0.50
175
(lower is better)
150 50
EverGuard Extreme Far Exceeds The Performance Of “Standard” TPO 25Membranes
® 0.25
Standard
125
TPO roofing sold today simply cannot match the performance of EverGuard Extreme®. It uses a proprietary formula-
0 0.00
tion 100
of stabilizers and UV absorbers to achieve performance levels far beyond current roofing standards. To prove it, we tested
e®
e®
um
um
EverGuard Extreme against other standard TPO membranes for the two key performance attributes most-highly sought after in
m
m
®
im
im
tre
tre
75
in
in
Ex
Ex
M
M
TPO 50membranes: heat aging and UV weathering. The results were astounding—which is why we back EverGuard Extreme®
TM
TM
rd
rd
ua
ua
AS
AS
G
G
with 25
the industry’s best guarantees: up to 35 years!*
er
er
Ev
Ev
0
*See applicable guarantees for complete coverage and restrictions. 30 400
60 e ®
80 e ®
60 r B
il
80 B
il
60 r C
il
80 r C
il
il
il
60 r A
il
80 A
il
m
m
m
m
m
m
m
m
or
or
m
m
o
o
o
o
t it
t it
tre
tre
t it
t it
t it
t it
350
pe
pe
pe
pe
pe
pe
25
Ex
Ex
m
m
m
m
m
m
rd
rd
Co
Co
Co
Co
Co
Co
300
ua
ua
G
G
20
er
er
250
Ev
Ev
% 15 lbf 200
150
150
EverGuard Extreme ® vs. Standard TPO Membranes 10 EverGuard Extreme ® vs. Standard TPO Membranes
In 280ºF Heat-Aging Tests...
100 125
In ASTM D6878 Accelerated Weathering Tests...
Performance Versus ASTM Standard, X Minimum
5
50
Days to Cap Cracks w/280°F Oven Aging
200 100
5.0
0 0
4.5 175 lbf 75
e®
e®
um
um
m
m
im
im
tre
tre
4.0
in
in
50
Ex
Ex
M
M
150
TM
TM
rd
rd
3.5
ua
ua
AS
AS
25
G
G
125
er
er
Ev
Ev
3.0
0
2.5 100
um
im
2.0 75
in
M
TM
1.5
50
AS
1.0
25
0.5
0.0 0
30
60 e ®
80 e ®
60 r B
il
80 r B
il
60 r C
il
80 r C
il
il
il
60 r A
il
80 A
il
60 e ®
80 e ®
m
m
m
m
m
m
m
m
60 r B
il
80 B
il
60 r C
il
80 r C
il
il
il
60 r A
il
80 A
il
or
m
m
m
m
m
m
m
m
m
m
o
o
o
o
o
or
or
m
m
o
t it
t it
tre
tre
o
o
t it
t it
o
t it
t it
t it
t it
tre
tre
t it
t it
t it
t it
pe
pe
pe
pe
pe
pe
25
Ex
Ex
pe
pe
pe
pe
pe
pe
Ex
Ex
m
m
m
m
m
m
m
m
m
m
rd
rd
m
m
Co
Co
Co
Co
Co
Co
rd
rd
Co
Co
Co
Co
Co
Co
ua
ua
ua
ua
G
G
20
G
G
er
er
er
er
Ev
Ev
Ev
Ev
% 15
EverGuard Extreme vs. Standard TPO Membranes
® 10
See The Proof...
In ASTM D6878 Accelerated Weathering Tests...
Performance Versus ASTM Standard, X Minimum
5
5.0
0
4.5
um
im
Even after the most severe accelerated heat aging at 280ºF, But,4.0a leading competitor’s standard TPO shows severe
in
M
EverGuard Extreme® TPO still looks brand new! deterioration on both the top and bottom of the membrane.
TM
3.5 AS
3.0
2.5
2.0
1.5
1.0
0.5
0.0
60 e ®
80 e ®
60 r B
il
80 r B
il
60 r C
il
80 r C
il
il
il
60 r A
il
80 A
il
m
m
m
m
m
m
m
m
or
m
m
o
o
o
o
o
t it
t it
tre
tre
t it
t it
t it
t it
pe
pe
pe
pe
pe
pe
Ex
Ex
m
m
m
m
m
m
rd
rd
Co
Co
Co
Co
Co
Co
ua
ua
G
G
er
er
EverGuard Extreme® TPO EverGuard Extreme® TPO Competitor’s Standard TPO Competitor’s Standard TPO
Ev
Ev
(top of membrane) (bottom of membrane) (top of membrane) (bottom of membrane)
9SINGLE-PLY ROOFING
EverGuard & Freedom TPO Systems
® ™
Solutions for superior performance and value
EverGuard® or EverGuard Extreme® TPO
Drill-Tec™ Insulation Fastener & Plate(s)
EverGuard® TPO &
EverGuard Extreme® TPO Drill-Tec™ Fastener & Membrane Plate(s)
with Drill-Tec™ Fasteners... EnergyGuard™ Polyiso Insulation
• Reliable low-cost installation Structural Deck
• A
SAP Plate/Fastener
combinations speed-up install
MECHANICALLY ATTACHED
• No fumes or solvents
(IN-LAP ATTACHMENT)†
• R hinoBond® Non-Penetrating
Fastening System option Advantages Membrane Type
available • Lightweight •E verGuard® TPO: 45, 60, 80;
• Low Cost Polyester scrim-reinforced
• Flexible Application smooth‑faced membrane
• EverGuard® TPO: FB-45,
Maximum Guarantee† FB-60, FB-80; Polyester scrim-
• EverGuard® TPO - 25 years reinforced fleece‑backed membrane
• EverGuard Extreme® TPO - 30 years
•E verGuard Extreme® TPO: 50, 60,
70, 80
Freedom™ TPO With
Heat-Weld Technology...
• S
aves time, saves money,
easy to install
• Installs much faster* than a
taped EPDM seam application EverGuard® Freedom™ TPO
Self-Adhered Membrane
• Eliminates adhesive solvent Factory-Applied Adhesive
flash time required in traditional Drill-Tec™ Insulation Fastener & Plate(s)
adhered systems Heat-Weld or RapidSeam™
Self-Adhered Seam
• N
o volatile organic compounds EnergyGuard™ Polyiso Insulation
(VOCs) Structural Deck
Freedom™ TPO With
RapidSeam™ Technology...
SELF-ADHERED FACTORY-APPLIED
• E
asy to install, saves time, BUTYL ADHESIVE OR HEAT-WELD†
saves money
• Installs much faster than Advantages Membrane Type
taped EPDM seam • Lightweight • Freedom™ TPO with RapidSeam™
application, no adhesive • Flexible Application 45, 60
flash, up to 5 times faster • Excellent Wind Resistance • Freedom™ TPO HW 45, 60, 80
than water-based adhesives,
Maximum Guarantee†
and up to 3 times faster • 20 years
than solvent-based
adhesives (depending on
outside temperature)
• Twice
the peel strength* of *See EverGuard® Specification Manual and 2012 Technical Points &
conventional EPDM Butyl Observations for system requirements.
taped systems †
See the published GAF application instructions for complete installation
details and guarantee coverage.
10SINGLE-PLY ROOFING
EverGuard® or EverGuard Extreme® TPO
EverGuard® TPO, EverGuard® Bonding Adhesive
EverGuard Extreme® TPO, Drill-Tec™ Insulation Fastener & Plate(s)
& EverGuard® Bonding
Adhesives...
EnergyGuard™ Polyiso Insulation
• P rovide enhanced Structural Deck
wind uplift
• Low polluting (low VOC)
and water-based adhesive FULLY ADHERED SYSTEMS
provide environmentally (BONDING ADHESIVE)†
friendly roofing options
Advantages Membrane Type
• F leece-back membrane • Lightweight • EverGuard® TPO: 45, 60, 80;
and low-rise foam adhesive • Low To Moderate Cost Smooth‑faced membrane
provide rapid install and • Enhanced Wind Resistance • EverGuard® TPO: FB-45, FB-60,
near zero VOC—perfect FB-80; Fleece‑backed membrane
for schools & healthcare Maximum Guarantee† • EverGuard Extreme® TPO: 50, 60,
facilities • EverGuard® TPO - 30 years 70, 80
• EverGuard Extreme® TPO - 35 years
• EverGuard Extreme® TPO: FB-50,
FB-60, FB-70, FB-80; Fleece-backed
membrane
EverGuard® TPO
FB Membrane
Ruberoid® 20
Ruberoid® 20
TriPosite XL™...
• C
ombines the reflectivity
of TPO with redundancy GAFGLAS® Stratavent® Eliminator™
Perforated Venting Base Sheet
of an asphaltic system
Drill-Tec™ Insulation Fastener & Plate(s)
• D
urable long-term
EnergyGuard™ Polyiso Insulation
guarantee system Structural Deck
TriPosite XL™ (ADHERED SYSTEM
WITH BITUMINOUS ASSEMBLY)†
Advantages Membrane Type
• High Strength • E verGuard® TPO: FB-45, FB-60,
• Durable, Redundant Assembly FB-80; Fleece‑backed membrane
• Long-Term Value
• EverGuard Extreme® TPO:
• Re-cover Systems Available
FB-50, FB-60, FB-70, FB-80
Maximum Guarantee†
• EverGuard® TPO - 30 years
• EverGuard Extreme® TPO - 35 years
†
See the published GAF application
instructions for complete installation
details and guarantee coverage.
11GAF EnergyGuard™ Roof Insulation Products
ROOF INSULATION PRODUCTS
Economy and exceptional thermal
performance for all types of roofing systems
EnergyGuard™ Polyiso Insulation
and Tapered Polyiso Insulation Ruberoid® Mop Plus Granule
•D esigned for use in practically any low-slope roofing application, GAFGLAS® FlexPly™ 6 Plies
with Roofing Asphalt
including BUR, mod bit, and single-ply systems
• High insulation value — Superior “LTTR” value compared to GAFGLAS® Stratavent® Eliminator™
any other FM Class I rated product of equivalent thickness Perforated Venting Base Sheet with
Roofing Asphalt
at design value of 5.7 per inch
EnergyGuard™ Polyiso Insulation
• EnergyGuard™ roof insulation board is made of glass fiber-reinforced
cellulosic felt facers bonded to a core of polyiso foam Drill-Tec™ Fastener
•M anufactured with EPA-compliant blowing agents containing no Deck
CFCs or HCFCs; has zero ozone depletion potential (ODP) and
virtually no global warming potential (GWP)
• Available in a variety of thicknesses from .5” to 4.0” to best suit
your needs TYPICAL 4-PLY MOP-APPLIED SYSTEM USING
• Available in 4’x4’ and 4’x8’ boards ENERGYGUARD™ POLYISO INSULATION
• Tapered panels are also available in slopes of 1/16”, 3/16”, 1/8”,
3/8”, 1/4”, and 1/2”
EnergyGuard™ Perlite Insulation and Tapered Perlite EnergyGuard™ HD & EnergyGuard™ HD Plus
Polyiso Cover Board
•C omposed of expanded perlite particles, selected binders, and
cellulose fibers, which provide its insulating efficiency •A 1/2" thick high-density polyiso cover board that has an R-value of 2.5,
• Treated surface helps ensure proper adhesion to roof membranes the highest of any cover board
•D esigned for use in BUR, mod bit & some single-ply systems • Available in two compressive strengths: HD ≥80 psi and HD+ ≥110 psi
• Available in ¾”, 1”, 1.5”, and 2” thicknesses • Durable construction combined with a durable coated glass facer
• Tapered boards available to improve drainage • E asy to handle... lightweight (11 lbs for HD and 13 lbs for HD+ per 4'x8'
• Available in ½” re-cover boards for use over existing roofs board); easy to cut and install
• Cant strips also available to provide a smooth transition from •V ersatile... compatible with mechanically attached TPO, fully adhered
horizontal to vertical surfaces TPO, cold-applied MB, cold-applied BUR applications, and more
GAF Roof System Insulation Compatibility Guide
ly
-Pl red
Sin ch e i c a l
gl e dh e
At t chan
gl e e d
gl e d
y
um d
y
y
ofi p
Product Composition
-Pl
-Pl
B i t di f i e
en
R o i l t- U
Sin ll a s t
Sin ll y A
ng
Me
a
Mo
EnergyGuard Polyiso
™
Bu
Ba
Fu
1 1
Flat Polyiso foam with organic/glass facer u u u u u Some membrane systems
1
1 may require a cover board
Tapered Polyiso foam with organic/glass facer u u u u
or the use of GAFGLAS®
Stratavent® Eliminator™
1 1 Perforated Venting
Re-cover Polyiso foam with organic/glass facer u u u u u
Base Sheet. Check with
membrane supplier for code
EnergyGuard™ HD/HD Plus Polyiso Cover Board and warranty requirements.
1 1
Flat HD >80 psi Coated glass facer u u u u u
Flat HD Plus >110 psi Coated glass facer 1 1
u u u u u
EnergyGuard™ Polyiso Composite
Flat Polyiso foam, perlite, and organic/ u u u u u
glass facer
Tapered Polyiso foam, perlite, and organic/ u u u u u
glass facer
EnergyGuard™ Perlite Insulation
Flat Perlite u u u u
Tapered Perlite u u u u
Re-cover Perlite u u u u
Cant/Edge Perlite u u
12ROOFING ACCESSORIES
GAF Roofing Accessories
A single supplier for all your roofing components
means a single source for accountability
Metalastic Expansion Joint Covers
®
“Reduce field splices—and risk of leaks”
Field splices are one of the most
notorious leak sites on the roof.
GAF has designed the most flexible
group of expansion joint covers in
the industry. Available in 50’ rolls, or
customized up to 250’ rolls in black
or white, Metalastic® Expansion Joint
Covers eliminate splice joints every
10’ and promote trouble-free roofing
system performance. Substantially
reduces the contractor’s installation
labor, thereby reducing overall Splice failure on competitor’s product Metalastic Cover in continuous
®
installed cost. length run
CMF Style LP Style CTW Style SMF Style
Curb-to-Curb style Low Cant-to-Cant or Cant-to-Wall Curb-to-Wall style Cant-to-Cant or Cant-to-Wall
expansion joint profiles expansion joint profiles expansion joint profiles expansion joint profiles
M-Weld Preflashed Drainage & Moisture-Control Accessories
™
“Provides a uniform finished look for the roof while
improving the reliability of penetration flashings”
M-Weld™ Preflashed Accessories... are one-piece
roofing detail assemblies that can be used with modified
bitumen and built-up roofing systems. These accessories
are flashed with either an APP modified bitumen (for use
with torch-applied membranes) or an SBS modified bitumen
(for use on built-up roofs and mop- or cold-applied SBS Standard Adjustable Drain
applications). Available for use in a variety of different M-Vent ™
M-Vent™ Insert
roofing applications, Preflashed Accessories include:
• Vents... preflashed standard vents and preflashed
one-way vents
• Drains... preflashed drains (regular roof drains) and
preflashed scuppers (through-wall drains) One Way M-Curb™ TPO-Coated
• Penetrations... preflashed adjustable vents, preflashed
M-Vent™ System Metal Drain
plumbing vents, and M-Curbs, which are structural
urethane outer shells bonded to the roof surface and
filled with 2”-thick urethane rubber sealant
13ROOFING ACCESSORIES
Matrix™ Adhesives & Cements
Asbestos-free formulations are your safest choice
GAF offers a complete line of premium, asbestos-free
modified adhesives and cements. Specially formulated for
use with Ruberoid® SBS Modified Bitumen Membranes and
other GAF systems.
•C
old-applied roofing systems offer a great opportunity on • R epairs of hot- or cold-applied SBS modified bitumen
many roofs where use of torches and kettles is not safe roofs are easier with Matrix™ SBS Flashing Cements and
or practical. SBS Adhesives.
Cements:
Matrix™ 201 Premium SBS Flashing Cement
Matrix™ 202 SBS Flashing Cement
Matrix™ 203 Plastic Roof Cement
Matrix™ 204 Wet/Dry Roof Cement
Adhesives:
Matrix™ 101 Premium SBS Membrane Adhesive
Matrix™ 102 SBS Membrane Adhesive
Matrix™ 103 Cold Process Adhesive
Primer:
Matrix™ 307 Premium Asphalt Primer
Lexsuco Flashing, Vapor Retarders & Water Barriers
®
“Takes the guesswork out of flashing repair”
• Metal Edge (ME) Flashing
• Black/White (B/W) Flashing
• Reinforced (RF) Flashing Metal Edge Flashing
• L exsuco® Vapor Retarder, a 4-mil black
vinyl sheet with a perm rating of 0.5
• P ermate Vapor Retarder, an asphalt-
impregnated kraft paper with fiberglass- Black/White Flashing
reinforced edges and a perm rating
of 0.23
• L exsuco® Water Barrier, a high-quality
flexible PVC plastic sheet for moisture-
barrier applications in unexposed Reinforced (RF) Flashing
locations, such as below grade or
behind and beneath other building
components
For technical information, visit our website at gaf.com or call 1-800-ROOF-411 (1-800-766-3411).
14ROOFING ACCESSORIES
®
EverGuard Prefabricated Accessories
oost productivity up to 200%, reduce total installed cost by up to 25%,
B
and eliminate common problems often associated with field-fabricated details
EverGuard® TPO Prefabricated Accessories
Expansion Joint Fluted Corner Split Pipe Boot Corner Curb Wrap Universal Corner Vent Boot
Cover Tape RTA Strip Standing Seam Profile
EverGuard® PVC Prefabricated Accessories
Pipe Boot Pourable Sealer Pocket Inside Corner T-Joint Patch Fluted Outside Corner
Not Pictured: 6” x 150’ Detail Strip, Coated Metal, Cut Edge Sealant
Drill-Tec™ Fasteners “Broad range of fastening options for all systems”
For mechanically fastened roof system components,
Drill-Tec™ Fasteners are engineered to exacting
specifications to provide easy installation, corrosion
resistance, and system compatibility with virtually
any membrane or substrate.
• T ested for compliance with FMRC standards
4450 & 4470
• Available with factory-applied Drill-Tec™ CR-10
coating to ensure resistance to corrosion in even
the most severe conditions
15Superior Guarantees
SUPERIOR GUARANTEES
For Quality Systems Regional
Years of proven quality allow GAF to offer roofing Sales Offices
system guarantees on Modified Bitumen, Built- For the location of the closest
Up Roofing, GAF CompositeRoof™, EverGuard®, GAF distributor or factory-
EverGuard Extreme®, and TOPCOAT® Roofing certified contractor,
Systems. GAF Diamond Pledge™ No-Dollar-Limit call the nearest
(NDL) and System Pledge™ Roof Guarantees are GAF regional office.
available from 10 years up to 35 years* (material-
only warranties are also available on GAF products). Central
Guarantee extensions of up to 25% are available 900 S. Frontage Road, Suite 350
with GAF's WellRoof® Guarantee Extension.** Contact Woodridge, IL 60517
Guarantee Services for details. 630-296-1980
Master Roofing Northeast
700 Second Street, Suites C & D
Contractor Programs Swedesboro, NJ 08085
Choosing the right roofing system, one supplied by the right materials manufacturer,
856-241-0241
supported with the right guarantee, and—most important—installed by the right contractor,
is essential for the protection of the owner’s facility. Through its Master Roofing Contractor Southeast
Programs, GAF has aligned with key professional roofing contractors throughout the United 13361 N. 56th Street
States to ensure the quality installation and long-term performance of all Diamond Pledge™ Tampa, FL 33617
and System Pledge™ guaranteed systems. Selection of a Master or Master Select™ Roofing 813-829-8880
Contractor to install a GAF system will result in the cost-effective, on-time roofing solution 866-714-5350
that you demand, while maintaining superior quality and performance.
Southwest
14911 Quorum Dr, Suite 600
Certified Maintenance Professional Dallas, TX 75254
972-851-0500
(CMP) Program
Having a maintenance program in place for your roofing asset West
is critical not only for optimizing its overall longevity and perfor- 11800 Industry Avenue
mance but also helping ensure you have uninterrupted guarantee Fontana, CA 92337
coverage if issues arise. GAF Certified Maintenance Professionals 951-360-4200
(CMPs) are contractors who have not only the expertise to main- 800-445-9330
™
tain and service your roof but also the exclusive ability to extend
your Diamond Pledge™ NDL Roof Guarantee by 25%—via the
WellRoof ® Guarantee Extension,** at no cost to you. Contact GAF Canada Sales Office
Guarantee Services for details.
855-492-8085
gaf.com – Your Resource
For Complete Product Data Service Contacts
GAF’s website contains technical data and information on both low- and steep-slope TECHNICAL SERVICES AND
products. Information can be viewed or, in many cases, faxed or e-mailed to you, GUARANTEE STATUS
at your request directly from our website! 1-800-ROOF-411
(1-800-766-3411)
Full-Service Technical Support INTERNATIONAL SALES
1-800-555-1852
To assist the architect and specifier from design through installation, the GAF Roofing System
Solutions CD-ROM contains information on all the GAF commercial products and systems. ARCHITECTS AND SPECIFIERS
GAF’s Technical Services Group is available to provide additional data and information on 1-800-522-9224
geographic details, specific GAF projects, and code-related questions. For more information
about our quality roofing products, systems, or support, visit our website at gaf.com or call
our toll-free Technical Hotline, 1-800-ROOF-411.
Architectural Information Services...
An Entire Group Dedicated To You
Architects and specifiers can access an entire team devoted to assisting you with the
specification process. They can answer questions and provide assistance with master
specification preparation and other valuable activities. Call them toll free: 1-800-522-9224
or e-mail AIS@gaf.com. gaf.com
*See applicable GAF roof guarantee for complete coverage and restrictions.
**Guarantees of 30 and 35 years do not qualify for WellRoof® Guarantee Extension.
© 2014 GAF • 6/14 • #135 COMGN100You can also read
