2021 Customer Training Catalog - Training options to meet your needs - NEW VIRTUAL INSTRUCTOR LED COURSES AVAILABLE - Johnson Controls
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
NEW VIRTUAL INSTRUCTOR
LED COURSES AVAILABLE
2021 Customer Training Catalog
Training options to meet your needs.
1 HOME www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com
TABLE OF CONTENTS
Course Details and Information
Institute
About the Johnson Controls Training Institute..............................................................................3
Training Options to Meet Your Needs...........................................................................................4
Enrollment Information.................................................................................................................5
Training Institute Locations and Hotels.........................................................................................6
Typical Sequence of Courses
HVAC Industry.............................................................................................................................12
Metasys® Systems.......................................................................................................................19
Facility Explorer ..........................................................................................................................20
®
Metasys® Validated Environments...............................................................................................21
Instructor-Led Virtual Learning Courses.....................................................................................29
Courses Offered By Request Only...............................................................................................37
Packages
Learning Packages......................................................................................................................40
Offering
Facility O&M Workforce Assessments and Development Solutions............................................42
Forms
Learning Package Order Form....................................................................................................41
Course Application......................................................................................................................44
2 HOME www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com
About the Johnson Controls Training Institute
Since 1947, the Johnson Controls Training Institute has been helping people succeed at creating and managing quality
building environments. The Training Institute partners with engineering schools, technical colleges, and experts in the
building environments industry. This allows us to provide high-quality learning experiences that reflect both the current state
of the industry today and the direction its heading in the future.
Our curriculum has been developed by professional instructors who are experienced in the building environments industry.
Their extensive real-world experience and ability to share their knowledge in a structured format assures you an enlightening
and productive educational experience.
• Learn from Certified Instructors* with years of industry experience
• Experiment in our labs, using specially designed
equipment simulators
• Find the learning opportunities
• Expand your knowledge in industry topics such as:
• Building Automation Systems
• Energy Management
• Heating, Ventilating, and Air Conditioning Systems
• Preventative Maintenance
• Automated Building Controls
Because your goal is to apply what you’ve learned, our state-of-the-art facilities include fully equipped labs for hands-on
exercises. Portable equipment simulators enable the Training Institute to bring many of its courses to your location, yet still
enable you to practice what you’ve learned without jeopardizing building operations.
Our comprehensive and cost-effective programs are designed for anyone who needs a working knowledge
of environmental systems, including:
• Building Owners
• Building Managers
• Engineers
• Operators
• Maintenance Technicians
• Property Managers
*Johnson Controls Training Institute instructors are certified on the technical and application objectives of each course, while referencing
the core instructor competencies summarized by the International Board of Standards for Training, Performance, and Instruction (IBSTPI)
Instructor Competencies – The Standards (Volume 1) ©2003, all rights reserved.
www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com HOME 3
TRAINING OPTIONS TO MEET YOUR NEEDS
Our learning opportunities are designed to provide you with the knowledge and skills necessary to effectively and efficiently
operate your building’s systems. By using your newly acquired abilities, you can maximize the potential of your building systems
and increase your return on investment. To help you take advantage of the benefits of our training, we offer several ways to
approach our courses. You can select from our:
Training Institute Courses (Scheduled)
Regularly scheduled courses with both a classroom and lab
component are conducted at our ten Johnson Controls Training
Institute locations. During class you will be using an iPad® to
take notes and highlight the material. When class ends you
will take your notes and course material with you on a USB
Drive. The descriptions of the regularly scheduled courses
begin on page 13. Refer to the Class Schedule available at
www.johnsoncontrols.com/institute for the dates, locations,
and prices of these courses. Note: No audio/visual recording
equipment is allowed. Onsite Learning Programs
Johnson Controls Training Institute can help you make
Instructor-Led Virtual Learning Courses the most of your investment in learning by bringing
and Learning Packages our instructors and classes to you or to the location of
Learn in the convenience of your own home, office, or work your choice. More and more companies are realizing
location using Johnson Controls instructor-led virtual learning the value of bringing training Onsite. Our onsite
courses or learning packages. Learning packages include Courses can be the most efficient and cost-effective
self-study workbooks offering flexible, effective, cost-efficient way to train as few as eight employees.
opportunities to build knowledge and skills. Our instructor-led
virtual learning courses and learning packages can be used
as preparation for a course, to refresh skills, or to provide an Onsite Courses offer a number of advantages:
effective learning alternative if attendance at a typical classroom • Smaller class size allows for more individualized
course is impractical. The list of instructor-led virtual learning attention
• Economical as one instructor travels instead of
courses are on page 29 and information about our learning
eight or more students
packages begins on page 41. • Consistency among employees who learn
together as a group
Courses Offered By Request Only
Some of our courses target a more specific audience and To ensure the success of an onsite Course,
therefore, have lower demand. To continue to satisfy the needs you provide:
• A minimum of eight students
of those who still occasionally need these courses, selected
• A suitable room for training
courses are only conducted upon request. These courses can be
conducted at your site or at one of our eleven Training Institute Johnson Controls Training Institute will
locations. For this reason, these courses are not included on the provide:
schedule. To inquiry about scheduling a course, contact • Specially designed portable equipment
the Learning Institute at 414-524-4286 or simulators and computers
• USB jump drives with course and reference
cg-customer.registrar@jci.com.
material for all student
4 HOME www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com
ENROLLMENT INFORMATION
To browse our catalog and enroll for our
courses, please visit our website:
www.jcitraininginstitute.com
For more information, call or fax:
414-524-4286 or 800-524-8540
ONLINE 877-403-6625 (fax)
Email: cg-customer.registrar@jci.com
ENROLLMENT Payment:
Payment can be made using
Visa®, MasterCard® or
American Express®.
All necessary course materials are included in the
tuition listed in each course description.
Schedule of Classes Substitutions and Cancellations
The 2021 schedule of classes is available at Circumstances may occur that could prevent you or your
www.johnsoncontrols.com/institute. employee from attending a course for which you are enrolled.
The schedule is subject to change. For this reason, we allow you to substitute another employee
in their place at no additional fee. If no substitute student is
Vouchers for Institute Instructor Led Training available and you must cancel your enrollment, a refund will
Enjoy savings and flexibility by ordering a pack of vouchers be issued by visiting www.jcitraininginstitute.com at least 10
good for any classes without enrolling specific students at business days prior to the start of the course. If, however,
this time. For ordering information, call 800-524-8540. you must cancel within 10 business days of the start of the
(Vouchers cannot be used for course #4720 Facility course, you will be liable for the entire course fee.
Explorer Supervisory Controllers Engineering/N4
Certification or for virtual training.) Johnson Controls reserves the right to cancel classes and
• A 10-pack of training vouchers is 20,000. Vouchers are assumes no liability for expenses. All registrants will be
good for two years from the date of purchase and must be notified at least ten days before the start of class should a
used for regularly scheduled Training Institute classes. course be canceled.
• A 5-pack of training vouchers is $12,000. Vouchers are
good for one year from the date of purchase and must be
used for regularly scheduled Training Institute classes. Guarantee
• The Personal 3-Pack is valid for a specified individual for We stand behind our courses with the following guarantee:
any three classes and is good for one year from the date of If, by the midpoint of the course, you are not satisfied
purchase. The Personal 3-Pack is $7,600. with the course you are taking, Johnson Controls Training
Institute will refund your tuition fee in full, or give you credit
toward another course or packaged training program.
www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com HOME 5
TRAINING INSTITUTE LOCATIONS AND HOTELS
Students must call the hotels directly to make reservations. The Johnson Controls Training Institute rate must be requested.
Be sure to ask about complimentary shuttle services to and from our learning centers. (These services are not available
everywhere). Reservations made through a travel agency are not eligible for the discounted rate. Look for maps of the
Training Institutes on the Johnson Controls website: www.johnsoncontrols.com/institute
Suggested Hotels
Embassy Suites
213 International Circle
Hunt Valley, MD 21030
Holiday Inn Express Hunt Valley
11200 York Road
Hunt Valley, MD 21030
410-527-1500
Baltimore, Maryland
Residence Inn - Hunt Valley
60 Loveton Circle, Sparks, MD 21152 45 Schilling Rd
Located in rural Baltimore County off of Hunt Valley, MD 21031
I-83 North, approximately 35 miles from
410-527-2333
Baltimore Washington International Airport.
Greater Baltimore Convention and Visitor Bureau
Airport Code: BWI www.baltimore.org
1-877-Baltimore
Suggested Hotels
Four Points by Sheraton Greater Boston Convention
Wakefield Boston Hotel and Visitor’s Bureau
and Conference Center www.bostonusa.com
1 Audubon Road
Wakefield, MA 01880 The City Guide Salem, MA
781-245-9300 www.salemweb.com
Hampton Inn
59 Newberry Street (Route1)
Boston, Massachusetts Peabody, Ma 01960
978-536-2020
39 Salem Street, Lynnfield, MA 01940
Located approximately 12 miles from SpringHill Suites by Marriott
Boston’s Logan International Airport. 43 Newberry Street (Route 1)
Airport Code: BOS Peabody, Ma 01960
978-535-5000
6 HOME www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com
TRAINING INSTITUTE LOCATIONS AND HOTELS
Students must call the hotels directly to make reservations. The Johnson Controls Training Institute rate must be requested.
Be sure to ask about complimentary shuttle services to and from our learning centers. (These services are not available
everywhere). Reservations made through a travel agency are not eligible for the discounted rate. Look for maps of the
Training Institutes on the Johnson Controls website: www.johnsoncontrols.com/institute
Suggested Hotels
Element Hilton Garden Inn Las Colinas
3550 W. IH 635 7516 Las Colinas Blvd
Irving, TX 75063 Irving TX 75063
972-929-9800 972-444-8434
Staybridge Suites - Greater Dallas Convention
DFW Airport North and Visitor Bureau
2220 Market Place Blvd www.dallascvb.com
Irving TX 75063 214-571-1000
Dallas, Texas 972-401-4700
3021 West Bend Drive, Irving, TX 75063
Hyatt House Dallas/Las Colinas
Located 6 minutes from the Dallas 5901 N MacArthur Blvd
Fort Worth International Airport. Irving TX 75039
Airport Code: DFW 972-831-0909
Suggested Hotels
Hampton Inn & Suites Houston/Pasadena
4741 E Sam Houston Parkway South
Pasadena TX 77505
281-998-3300
Holiday Inn Express & Suites Deer Park
201 W X Street
Deer Park, TX 77536
281-479-9888
Houston, Texas,
4111 Greenshadow Drive Comfort Suites Deer Park Pasadena
1501 Center Street
Pasadena, TX. 77536
Deer Park, TX 77536
Located approximately 12 miles from the 281-930-8888
Houston/Hobby Airport and 28 miles from
George Bush Intercontinental Airport.
Airport Codes: IAH and HOU
www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com HOME 7
TRAINING INSTITUTE LOCATIONS AND HOTELS
Students must call the hotels directly to make reservations. The Johnson Controls Training Institute rate must be requested.
Be sure to ask about complimentary shuttle services to and from our learning centers. (These services are not available
everywhere). Reservations made through a travel agency are not eligible for the discounted rate. Look for maps of the
Training Institutes on the Johnson Controls website: www.johnsoncontrols.com/institute
Suggested Hotels
Courtyard Marriott Indianapolis at the Capital
320 North Senate Ave
Indianapolis, IN 46204
317-684-7733
Hampton Inn Indianapolis Downtown
105 S Meridian St
Indianapolis, IN 46225
Indianapolis, Indiana 317-261-1200
1255 North Senate Avenue, Residence Inn Marriott Canal
Indianapolis, IN 46202 350 West New York Street
Located approximately 15 minutes from Indianapolis, IN 46202
the Indianapolis International Airport. 317-822-0840
Airport Codes: IND
Greater Indianapolis Convention and Visitor Bureau
www.visitindy.com
Suggested Hotels
Holiday Inn Louisville East – Hurstbourne
1325 South Hurstbourne Parkway
Louisville, KY 40220
502-426-2600
Hyatt Place – East
701 South Hurstbourne Parkway
Louisville, KY 40222
502-426-0119
Louisville, Kentucky Greater Louisville Convention and Visitor’s Bureau
9410 Bunsen Parkway, Suite 100, www.gotolouisville.com
Louisville, KY 40220
Located approximately 10 miles from
Louisville International Airport.
Airport Codes: SDF
8 HOME www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com
TRAINING INSTITUTE LOCATIONS AND HOTELS
Students must call the hotels directly to make reservations. The Johnson Controls Training Institute rate must be requested.
Be sure to ask about complimentary shuttle services to and from our learning centers. (These services are not available
everywhere). Reservations made through a travel agency are not eligible for the discounted rate. Look for maps of the
Training Institutes on the Johnson Controls website: www.johnsoncontrols.com/institute
Suggested Hotels
Courtyard Marriott Pfister Hotel
300 West Michigan Street 424 East Wisconsin Avenue
Milwaukee, WI 53203 Milwaukee, WI 53202
414-291-4122 / 888-811-8139 414-273-8222 / 800-558-8222
Hilton Garden Inn Milwaukee Residence Inn Marriott
Downtown 648 N. Plankinton Avenue
611 N Broadway Milwaukee, WI 53203
Milwaukee, Wisconsin Milwaukee, WI 53202 414-224-7890
414-271-6611
514 N. Jefferson Street, Greater Milwaukee Convention
Milwaukee, WI 53202 Hilton – Milwaukee City Center and Visitor Bureau
Located in downtown Milwaukee, 509 West Wisconsin Avenue www.milwaukee.org
Milwaukee, WI 53203 414-273-3950 / 800-554-1448
approximately 10 miles from
414-271-7250 / 800-445-8667
General Mitchell International Airport.
Airport Codes: MKE Hotel InterContinental
139 East Kilbourn Avenue
Milwaukee, WI 53202
414-276-8686
Suggested Hotels
Crowne Plaza Phoenix Greater Phoenix Convention
4300 East Washington Street and Visitor’s Bureau
Phoenix, AZ 85034 www.arizonaguide.com
602-273-7778
Hampton Inn
601 North 44th Street
Phoenix, AZ 85008
602-267-0606
Phoenix, Arizona
Hilton Garden Inn
Gateway Community College, 3838 East Van Buren Street
108 N. 40th Street, Phoenix, AZ 85034 Phoenix, AZ 85008
Located about one mile north of the 602-306-2323
Phoenix Sky Harbor International Airport.
Airport Codes: PHX
www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com HOME 9
TRAINING INSTITUTE LOCATIONS AND HOTELS
Students must call the hotels directly to make reservations. The Johnson Controls Training Institute rate must be requested.
Be sure to ask about complimentary shuttle services to and from our learning centers. (These services are not available
everywhere). Reservations made through a travel agency are not eligible for the discounted rate. Look for maps of the
Training Institutes on the Johnson Controls website: www.johnsoncontrols.com/institute
Suggested Hotels
Ayres Hotel Greater Los Angles Convention
12850 Seal Beach Boulevard and Visitor Bureau
Seal Beach, CA 90740 www.latourist.com
800-653-3230 213-689-8822
Courtyard Marriott Orange County Visitor Information
5865 Katella Avenue www.visittheoc.com
Cypress, CA 90630 877-GO-ORANGE
Southern California 714-827-1010
5770 Warland Drive, Cypress, CA 90630 Hyatt House
Located approximately 9 miles from the 5905 Corporate Avenue
Long Beach Airport, 20 miles from the Cypress, CA 90630
714-828-4000
John Wayne Airport, and 30 miles from
the Los Angeles International Airport.
Marriott Residence Inn
Airport Codes: SNA & LAX 4931 Katella Avenue
Los Alamitos, CA 90720
714-484-5700
Suggested Hotels
Hilton Garden Inn Tampa Fairfield by Marriott
East/Brandon 6720 Lakeview Center Drive
10309 Highland Manor Drive Tampa, FL 33619
Tampa, FL 33610 (813) 626-3000
813-626-6700
Holiday Inn Express & Suites
Residence Inn Tampa Sabal 8610 Elm Fair Blvd
Park/Brandon Tampa, FL 33610
9719 Princess Palm Avenue (813) 490-1000
Tampa, Florida Tampa, FL 33619
813-627-8855 Greater Tampa Convention
3802 Sugar Palm Dr, Tampa FL 33619 and Visitor’s Bureau
Located 12 miles from the Staybridge Suites Tampa www.visittampabay.com
Tampa International Airport. East Brandon
3624 North Falkenburg
Airport Codes: TPA
Tampa, FL 33619
813-227-4004
10 HOME www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.comTRAINING INSTITUTE LOCATIONS AND HOTELS
Students must call the hotels directly to make reservations. The Johnson Controls Training Institute rate must be requested.
Be sure to ask about complimentary shuttle services to and from our learning centers. (These services are not available
everywhere). Reservations made through a travel agency are not eligible for the discounted rate. Look for maps of the
Training Institutes on the Johnson Controls website: www.johnsoncontrols.com/institute
Suggested Hotels
Home2 Suites by Hilton York
212 Pauline Drive
York, PA 17402
717-747-0360
Shrewsbury Hampton by Hilton
1000 Far Hills Drive
New Freedom, PA 17349
New Freedom, PA 717-235-9898
5000 Renaissance Drive Holiday Inn Express & Suites York
New Freedom, PA 17349 140 Leader Heights Road
Located 52 miles from the Baltimore York PA 17403
717-741-1000
Washington International Airport and
47 miles from the Harrisburg
Hampton Inn & Suites Hilton York South
International Airport. 2159 South Queen Street
Airport Codes: BWI & MDT York PA 17402
717-741-0900
Greater Shrewsbury Convention
and Visitor’s Bureau
www.shrewsburyguide.info
www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com HOME 11TYPICAL SEQUENCE OF HVAC INDUSTRY COURSES
Focus on Mechanical Focus on Controls
HVAC Equipment HVAC Mechanical
Maintenance (#225) Systems (#210)
Fundamental Control Strategies
for HVAC Systems (#215)
Contractor Course
HVAC Pneumatic
YT/YK Centrifugal Chiller and
Controls - Multi-Manufacturer
Compressor Overhaul (#2107)
(#221)
YK High Pressure YCAV Air Cooled
YVAA Air Cooled
Centrifugal Operations/ Rotary Screw Liquid
Screw Chiller (#2111)
Maintenance (#2102) Chillers (#2103)
YPAL Series 100 OptiView Control
Packaged RTU (#2108) Panel (#2100)
YVWA Water Cooled Absorber Operations/
Screw Chiller (#2112) Maintenance (#2104)
(By request only)
YLAA Chiller Start-Up &
Troubleshooting (#2114)
Series II VFD Commissioning
Training - JCI/Eaton (#233)
(By request only)
12 HOME www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.comCourse Duration Course Fee
HVAC Mechanical Systems
Monday–Friday $2500
Course #210, 3.0 CEU Class ends at per student
11:30 a.m. on Friday
The fundamentals of HVAC mechanical equipment operation are taught in this ENROLL NOW
survey, hands-on course. Designed for personnel responsible for the selection,
design, installation, calibration or maintenance of HVAC mechanical equipment.
It emphasizes hands-on activities with boilers, chillers, air handlers and other
operating equipment from a variety of manufacturers. Students will gain a
comprehensive understanding of operating principles and the proper use of test
instruments to verify equipment performance.
Course Topics
• HVAC System Types and Piping • Controls and Components
Systems • Boilers and Boiler-Related Equipment
• Psychrometrics • Heat Exchangers and Pumps
• Air Handlers, Types and • Refrigeration Fundamentals
Characteristics • Reciprocating Chillers and Accessories
• Fans and Fan Characteristics • Centrifugal Chillers
• Dampers and Damper Actuators • General Troubleshooting
• Valves and Valve Actuators • Hands on Lab
• Facility Management Systems • Final Review
Fundamental Control Strategies Course Duration Course Fee
for HVAC Systems Monday–Friday $2500
Course #215, 3.0 CEU Class ends at per student
11:30 a.m. on Friday
This introductory course is designed for anyone who operates, maintains ENROLL NOW
or troubleshoots HVAC control systems. Students will analyze a number
of HVAC Systems and their associated controls, including central plant,
air and water distribution and terminal systems. The strategies learned
can be applied to any controls system type or manufacturer.
Course Topics
• HVAC Environment, Systems and Controls • Air Distribution Systems
• Psychrometrics, Air Properties and HVAC Processes • Control Strategies for Air Distribution
• Control System Fundamentals Systems
• Sensor Types and Applications • 100% OA System Control Strategies
• Controls System Configurations • Mixed Air System Control Strategies
• Feedforward and Feedback Control Loops • Variable Air Volume Control Strategies
• Reset Control Strategies • VAV Terminal Unit Control Strategies
• Controlled Devices: Valves, Dampers,and Actuators • Introduction to Facility Management
• Hot/Chilled Water Distribution Systems Systems
• Control Strategies for Water Distribution Systems • Hands on Lab
• Hot/Chilled Water Terminal Systems • Final Review
• Control Strategies for Water Terminal Systems
www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com HOME 13Course Duration Course Fee
HVAC Pneumatic Controls - Multi Manufacturer Tuesday-Thursday $2000
Course #221, 2.0 CEU Class ends at per student
3:30 p.m. on Thursday
This course provides a comprehensive overview of maintenance ENROLL NOW
requirements, calibration procedures and troubleshooting techniques.
Hands-on lab exercises emphasize calibrating and troubleshooting using
pneumatic controls from a variety of manufacturers.
Recommended Prerequisite:
Fundamental Control Strategies for HVAC Systems (#215) or HVAC
Mechanical Systems (#210) or equivalent experience
Course Topics
• Pneumatic Air Supply and Distribution Systems
• Room Control – Thermostats and Humidistats
• Relation of Controller and Controlled Device
• Single Setpoint Room Controllers, Thermostats and Humidistats
• Dual Setpoint Room Controllers
• Pneumatic Controlled Devices: Valves, Dampers,
Actuators, Pilot, Positioners
• Auxiliary Devices
• Pneumatic Transmitters (Remote Sensing)
• Single Input Receiver Controllers
• Dual Input Receiver Controllers
Course Duration Course Fee
HVAC Equipment Maintenance
Tuesday-Thursday
Course #225, 2.0 CEU Class ends at
$2000
per student
3:30 p.m. on Thursday
This introductory course provides an overview of the maintenance ENROLL NOW
tasks and techniques that are typically required on HVAC equipment.
Individuals new to HVAC maintenance, managing a maintenance
function or desiring a refresher will benefit. Students will learn
how to perform proper maintenance, safety procedures and basic
troubleshooting techniques.
Course Topics
• Overview of HVAC • Cooling Towers
• Electrical Systems • Air Handling Systems
• OSHA Lockout/Tagout Training • Boilers
• Refrigeration Maintenance and • Air Compressor Maintenance
Troubleshooting • Hands on Lab
• Centrifugal Systems Overview • Final Review
• Pump Maintenance
14 HOME www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.comCourse Duration Course Fee
OptiView Control Panel Tuesday-Wednesday $1500
Course #2100, 1.3 CEU Class ends at per student
3:30 p.m. on Wednesday
This two-day course for service personnel covers the OptiView graphic ENROLL NOW
micro-processor control center. Basic navigation, panel architecture, operation
and service of the OptiView Control Centers are covered in this course. Labs
include hands-on training using OptiView Control Panel simulators.
Course Topics
• OptiView Basics • Variable Speed Drive Board
• OptiView Architecture: Component • High Speed Thrust Bearing Limit Switch
Identification, Location and Functionality • Proximity Probe, Refrigerant Level Control
• OptiView Operation: Screen • Sale Order Data, Custom User ID and
Navigation,Program Download, Codes, Password, Record Setpoint Changes
Configuration Setup, System • High Condenser Pressure Warning Threshold
Commissioning Checklist • Smart Freeze Protection
• System Calibration, Service Setpoints • Diagnostics and Troubleshooting
and Reset Procedures • Advanced Diagnostics, Trend Screen Setup
• Electro-Mechanical Starter Board • Hands on Lab
• Solid State Starter Board
Course Duration Course Fee
YK High Pressure Centrifugal
Operations/Maintenance Tuesday-Thursday $2000
Class ends at
Course #2102, 2.0 CEU 3:30 p.m. on Thursday
per student
Students will learn about the internal workings of the YK high-pressure ENROLL NOW
centrifugal single-stage compressor, oil return system, OptiView Control
Center and other components and subsystems. A comprehensive review
of the preventive maintenance schedule and system capacity checkout
procedure is also covered.
VIRTUAL COURSE
Course Topics AVAILIBLE!
• Centrifugal Compressor Theory of Operation
• YK Chiller Design and Component Functionality
• YK Seasonal Start-up
• OptiView Basics: Application, Terminology
• OptiView Architecture: Component Identification, Component Location
• OptiView Operation: Screen Navigation, Interpretation, and Modification
• Maintenance
• Troubleshooting
• Warranty
• OptiView Simulator Hands on Lab
• Evaluating Chiller Performance
www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com HOME 15Course Duration Course Fee
YCAV Air Cooled Rotary Screw Liquid Chillers* Tuesday-Thursday $2000
Course #2103, 2.0 CEU Class ends at per student
3:30 p.m. on Thursday
This three-day course teaches service personnel about the YCAV Chiller ENROLL NOW
features, including the screw compressor, system ancillary components,
unit operation and maintenance. *Dress code: For safety, closed-toe,
leather shoes and long pants are required.
Course Topics VIRTUAL COURSE
AVAILIBLE!
• Screw Chiller Basics
• Basic Electronics
• VSD Basics
• VSD and Control Panel Architecture
• Operation and Sequencing
• Latitude Simulator Exercises
• Information and Safety, Handling and Storage
• VSD Operation and Faults
• Maintenance
• Unit Troubleshooting
• Hands on Lab
Course Duration Course Fee
Absorber Operations/Maintenance
Tuesday-Thursday $2000
Course #2104, 2.0 CEU Class ends at per student
3:30 p.m. on Thursday
This course teaches operators and technicians about the operation and ENROLL NOW
controls associated with the YORK® lithium bromide absorption chillers.
Absorption theory including P/T relationships and solution chemistry are also
covered. The operation and operating procedures for both Isoflow (single
stage) and Paraflow systems (two stage) are reviewed with an emphasis on
preventive maintenance procedures.
VIRTUAL COURSE
AVAILIBLE!
Course Topics
• Basic Refrigeration Principles • System and Safety Cycling Shutdowns
• Units of Measure, Types of Heat • Operation and Maintenance
• Absorption Principles • Crystallization
• Solution Chemistry •U nit Operation and Operational
• YIA Components and Cycle Limitations
• Water Circuits • Refrigerant Contamination
• YPC Components and Cycle • Heating/Cooling Changeover
• YPC Purge System • Preventive Maintenance
• Operating Information, Setpoints • Schedules
and Warnings • Hands on Lab
16 HOME www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.comCourse Duration Course Fee
YT/YK Centrifugal Chiller and Compressor Overhaul*
Monday-Friday
Course #2107, 3.3 CEU Class ends at
$2800
per student
3:30 p.m. on Friday
Service personnel will become familiar with the operation and maintenance of ENROLL NOW
centrifugal systems. Students will review R-11, R-123, R-22 and R-134a single stage
centrifugal chillers. They will also learn the internal workings of the compressor, oil
return system, lube circuit, purge and heat exchangers. The OptiView Control Center
plus preventive maintenance and system checkout procedures are also addressed
along with a hands-on teardown and rebuild of a YK centrifugal compressor. *Dress
code: For safety, closed-toe, leather shoes and long pants are required.
Course Topics
• Refrigeration Theory • OptiView Basics
• Centrifugal Compressor • OptiView Operation
Theory of Operation •O ptiView Start-up and
• YT/YK Chiller Design and Troubleshooting
Component Functionality •H igh Speed Thrust Switch
• YT/YK Maintenance •P roximity Probe
• Seasonal Start-up • Refrigerant Level Control
• Unit Troubleshooting • Oil Pump Variable Speed Drive
• Compressor Teardown/Reassembly • Hands on OptiView Labs
Course Duration Course Fee
YPAL Series 100 Packaged RTU
Tuesday-Thursday
Course #2108, 1.3 CEU Class ends at
$2000
per student
3:30 p.m. on Thursday
Students will learn the theory of operation of the Constant Volume and ENROLL NOW
Variable Volume Eco2 Rooftop Unit. Component functions, subsystems
are also discussed, along with an introduction to the FlexSys Systems. The
students will become familiar with the unit’s wiring and communication
cards, and the programming and sequence operation.
Recommended Prerequisite:
Entry to Mid- level Technician
Course Topics
• Safety Review • Introduction to FlexSys System
• Eco2 System Overview • BAS Communication
• Constant Volume/Variable • IPU Architecture
Volume Systems • Unit Configuration and Start-up
• Eco2 Physical Data • Programming and Sequence of Operation
• Unit Wiring
www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com HOME 17Course Duration Course Fee
YVAA Air Cooled Screw Chiller*
Tuesday-Thursday $2000
Course #2111, 2.0 CEU Class ends at per student
3:30 p.m. on Thursday
ENROLL NOW
This three-day course teaches experienced service technicians about the
YVAA Chiller. The course will include features of this unit and the differences in
installation, operation and maintenance from the YCAV. *Dress code: For safety,
closed-toe, leather shoes and long pants are required.
Recommended Prerequisites: VIRTUAL COURSE
• Working knowledge of the YCAV/YCIV Chiller AVAILIBLE!
• Working knowledge of VSDs
• Understanding of basic electronics
Course Topics
• Chiller layout and components
• Safety, handling
• Installation
• Operation/Maintenance
• VSD
• Simulation Exercises
Course Duration Course Fee
YLAA Chiller Start-up & Troubleshoot
Tuesday-Thursday $2000
Course #2114, 2.0 CEU Class ends at per student
3:30 p.m. on Thursday
ENROLL NOW
Students will learn the techniques, strategies and skills required to operate,
repair, start-up and maintain York® YLAA chiller and YLPA heat pump/chillers
using multiple scroll compressors in each system. The techniques acquired
in this course may be applied to other York® small tonnage chillers and
condensing units such as YCAL, YLUA and YCUL models.
VIRTUAL COURSE
AVAILIBLE!
Course Topics
• Safety
• Literature
• Theory
• Components
• Operations
• Wiring Diagrams
• Installation
• Startup
• Maintenance
• Evaluating Performance
• Warranty
18 HOME www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.comTYPICAL SEQUENCE OF COURSES FOR METASYS® SYSTEMS
Metasys® system extended Metasys® system extended
architecture for Building Operators OR architecture for Building Engineers
(#388) (#389)
Focus on Focus on Engineering
Maintenance and and Programming
Troubleshooting
Fundamental Control
Fundamental Control Strategies for HVAC Systems
Strategies for HVAC Systems (#215)
(#215)
Introduction to Metasys®
Introduction to Metasys® N2 Controllers (#4601)
N2 Controllers (#4601) (By request only)
(By request only)
Metasys DX9100
Metasys DX-9100 Operations/ Engineering (#364)
Troubleshooting (#365)
Metasys® FEC Systems
Metasys FEC Operations/
®
Engineering (#4707)
Troubleshooting (#4703)
Metasys® System Extended
Metasys extended
®
Architecture Engineering and Setup
architecture Hardware and (#391)
Troubleshooting (#4718)
Metasys® System Extended
Architecture Advanced
Engineering (#397)
Metasys® Graphics
Generation Tool (#3002)
(See Distance Learning)
Note: Your facility may utilize ASC controllers, DX, FEC controllers, or a combination of any of
these products. Make certain to select the appropriate courses based on your facility.
Introduction to Metasys User Eaton VSD Commissioning
Interface (#3021) Certification (#232)
(See Distance Learning) (By request only)
Engineering and Series II VFD Commissioning
Programming Certification - JCI/Eaton (#233)
(By request only)
Metasys User Interface
Graphics Editor (#3022)
(See Distance Learning)
www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com HOME 19TYPICAL SEQUENCE OF COURSES FOR FACILITY EXPLORER®
Focus on Maintenance Focus on Engineering
and Troubleshooting and Programming
Fundamental Control
Strategies for HVAC Systems
(#215)
Introduction to Metasys®
N2 Controllers (#4601) Facility Explorer MSTP Field
(By request only) Controller Engineering (#4714)
Facility Explorer
Metasys DX-9100 Operations/
Supervisory Controllers
Troubleshooting (#365)
Engineering/N4 Certification (#4720)
Introduction to Metasys®
N2 Controllers (#4601)
(By request only)
Metasys DX9100
Engineering (#364)
Advanced PCT
Programming (#3001)
(See Distance Learning)
Note: Your facility may include a variety of Metasys® and Facility Explorer
equipment, making it appropriate for you to choose courses from this
flowchart and from others in this section.
20 HOME www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.comTYPICAL SEQUENCE OF COURSES FOR METASYS®
VALIDATED ENVIRONMENTS
Engineers Designers
Fundamental Control Strategies Metasys® System
for HVAC Systems (#215) Extended Architecture
Engineering and Setup (#391)
Metasys® FEC Systems Metasys® Graphics
Engineering (#4707) Generation Tool (#3002)
(See Distance Learning)
Introduction to Metasys®
N2 Controllers (#4601)
(By request only) Note: Your facility may include a variety of
Metasys® and Facility Explorer equipment, making
Metasys DX9100 it appropriate for you to choose courses from this
Engineering (#364) flowchart and from others in this section.
Metasys® System
Extended Architecture
Advanced Engineering (#397)
Metasys® FEC Custom
Programming (#4704)
www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com HOME 21Course Duration Course Fee
®
Metasys DX-9100 Engineering
Monday-Friday $2500
Course #364, 3.0 CEU Class ends at per student
11:30 a.m. on Friday
ENROLL NOW
Experienced DX-9100 users will learn how to create and modify Course Topics
the DX-9100 application programs using Windows-based GX-9100
• Introduction to the DX-9100
software. This course is a follow-up to the Metasys® DX-9100
System
Operations/Troubleshooting course for students who want to develop
• Front Panel Operation
their skills in programming and troubleshooting their DX-9100 system.
• DX Commissioning Tool
• Creating an Application
Recommended Prerequisites: Using GX-9100 Software
Fundamental Control Strategies for HVAC Systems (#215) and any • Input Point Configuration
Metasys® DX-9100 Operations/Troubleshooting (#365) and or field • Output Point Configuration
experience of DX front panel. • Expansion Point Configuration
• Control Modules
• Numeric Modules
• Programmable Logic Controller
• Using Library Functions
• Student Topic Selected Lab
• Hands on Lab
• Final Review
Course Duration Course Fee
Metasys® DX-9100 Operations/Troubleshooting
Tuesday-Thursday
Course #365, 2.0 CEU Class ends at
$2000
per student
3:30 p.m. on Thursday
This introductory course teaches participants how to communicate Course Topics ENROLL NOW
and troubleshoot effectively using the DX-9100. This course • Overview of the DX-9100
is highly recommended for anyone involved in the day-to-day Controller
operation of a DX-9100 system. • Extension and Expansion Modules
• Front Panel Operation – Viewing
Inputs/Outputs
• Time, Constants, PM Data, Schedules
• Front Panel Operation – Changing PM Data
• Constants, Auto/Manual Mode
• Introduction to the GX-9100 Program
• Commissioning Mode, Calibration
• Basic System Troubleshooting
Using the DX-9100
• Loop Diagnosis Using Data Graphing
• Hands on Lab
• Final Review
22 HOME www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.comCourse Duration Course Fee
Metasys® System Extended Architecture
for Building Operators Monday-Wednesday
$2000
Class ends at
Course #388, 2.0 CEU 3:30 p.m. on Wednesday
per student
ENROLL NOW
This three-day course teaches building personnel how to make Course Topics
the most effective and efficient use of the features of a Metasys®
• Metasys® System
system extended architecture building management system. This
Extended Architecture
course is for building personnel who have new installations of
Overview
Metasys® system extended architecture using NAEs or NIEs or for
• Help File System VIRTUAL COURSE
those who have migrated from their existing Metasys® system. AVAILIBLE!
• Basic Navigation of the System
with the User Interface
• Commanding Objects
• Scheduling
• Setting Up Alarms
• Responding to Alarms
• Trending
• Totalization
• Graphics
• Hands on Lab
• Final Review
Course Duration Course Fee
Metasys® System Extended Architecture
for Building Engineers Monday-Friday
$2500
Class ends at
Course #389, 3.0 CEU 11:30 a.m. on Friday
per student
This course teaches building personnel how to make the most Course Topics ENROLL NOW
effective and efficient use of the features of a Metasys® system • Metasys®System Extended
extended architecture building management system. This course Architecture Overview
contains additional topics not covered in the Metasys® system • Help File System • Audit Trails
extended architecture for Building Operators course. • Basic Navigation of the • Sending Reports
System with the to Printers, Pagers,
User Interface Emails, etc.
• Commanding Objects • Adding Inputs and
• Scheduling Outputs to a Controller
• Setting Up Alarms • Reviewing Control
• Responding to Alarms Strategies
• Trending • Backing Up the Data
• Totalization • Hands on Lab
• Graphics • Final Review
• Setting Up Passwords
• User Views
www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com HOME 23Course Duration Course Fee
Metasys® System Extended Architecture
Engineering and Setup Monday-Friday $2500
Class ends at per student
Course #391, 3.0 CEU 11:30 a.m. on Friday
Students will learn how to set up and manage the Network Course Topics ENROLL NOW
Automation Engine (NAE) database and to use the power of the • Course Introduction
System Configuration Tool to generate an NAE database from • System Overview and Comparisons
existing ASC controller programming. • NAE User Interface Overview
• System Configuration Tool Overview
Recommended Prerequisites: • Adding BACnet® Devices
Due to the material covered in the class, anyone wanting to enroll • Newest Feature Objects
in this class is required to have had attended courses (#389) and • Overview: Designing a New Archive Database
(#4707) or (#353). • Installing Patches
• NIE and Migration Options Overview
For End Users and/or Authorized Building Controls Specialists/ • Hands on Lab
Contractors Only. • Final Review
Course Duration Course Fee
Metasys® System Extended Architecture
Advanced Engineering Tuesday-Thursday
$2000
Course #397, 2.0 CEU Class ends at
per student
3:30 p.m. on Thursday
Experienced personnel will learn how to write advanced programs Course Topics ENROLL NOW
for facility-wide or specific mechanical control applications using • Review Metasys® system
the System Configuration Tool (SCT). Students will build, modify extended architecture
and troubleshoot routines they create. • Control Objects
(Interlocks, Multiple Commands, LCT, etc.)
Recommended Prerequisites: • Reset Strategies
Student must have background in operating and/or engineering • Sequencing Equipment
the Metasys® system extended architecture. Metasys® system • Rotation of Equipment
extended architecture Engineering and Setup (#391) or Metasys® • Operating Equipment per Load Needs
system extended architecture for Building Engineers (#389). • Lead Lag Strategies
• Creating Calculations Including Tonnage, Highest
For End Users and/or Authorized Building Controls Specialists/ Daily, Temperature, etc.
Contractors Only. • Student Directed Topics and Activities
• Hands on Lab
• Final Review
24 HOME www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.comCourse Duration Course Fee
®
Metasys FEC Operations/Troubleshooting
Tuesday-Thursday $2000
Course #4703, 2.0 CEU Class ends at per student
3:30 p.m. on Thursday
Designed as a beginners course for people working with Field Course Topics ENROLL NOW
Equipment Controllers (FECs), this course shows students how to
• Introduction to Controllers
connect to FECs and how to download and test existing control
• CCT User Interface
programs. It also covers calibration of input sensors and setup
• Mobile Access Portal
and verification of inputs and outputs. This course is designed for
• Transferring Files
building personnel who want to better understand field controller
• Data Flow and Connections
operation, commissioning and troubleshooting.
• IO Commissioning
• Peer-to-Peer
Recommended Prerequisite:
• PRAC+ and PID
Fundamental Control Strategies for HVAC Systems (#215) or
• Commissioning Programs
equivalent experience.
• Simulating Programs
• Hands-on Labs
• Final Review
Course Duration Course Fee
®
Metasys FEC Custom Programming
Tuesday-Thursday
Course #4704, 2.0 CEU Class ends at
$2000
per student
3:30 p.m. on Thursday
Students will learn how to create and test customized control strategies Course Topics ENROLL NOW
for FEC controllers in this three-day course. The course is designed for • CCT User Interface
experienced building personnel who want to expand their knowledge of • Adding and Modifying
HVAC Control Systems and Johnson Controls FEC devices. Modules
• Logic Blocks
Recommended Prerequisites: VIRTUAL COURSE
• File and Module Management
Metasys® FEC Systems Engineering (#4707) and experience using the AVAILIBLE!
• PRAC+ and PID
FEC software prior to attending 4704. • State Tables
• Sequencers
For End Users and/or Authorized Building Controls Specialists/ • Central Plant Application
Contractors Only. • Hands-on Labs
www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com HOME 25Course Duration Course Fee
®
Metasys FEC Systems Engineering
Tuesday-Thursday
Course #4707, 2.0 CEU Class ends at
$2000
per student
3:30 p.m. on Thursday
ENROLL NOW
In this advanced Field Equipment Controller (FECs) programming class, Course Topics
students will learn how to write and test programs for the (FECs). They
• CCT User Interface
will use the software simulation tool to verify that the programs satisfy
• Application Creation
the sequence of operations. The course is designed for experienced
• Setting Preferences
personnel who want to become proficient in writing or revising programs
• Configuring a Local Display VIRTUAL COURSE
for Johnson Controls FEC devices. Although not a prerequisite, it is highly AVAILIBLE!
• Peer-to-Peer
recommended that students are familiar of the topics found in course
• Sideloops
#4703.
• Advanced Application Controllers
• State Tables
Recommended Prerequisite:
• Data Flow and Connections
Fundamental Control Strategies for HVAC Systems (#215) or equivalent
• Logic Blocks
experience
• Adding Modules
• PRAC+ and PID
For End Users and/or Authorized Building Controls Specialists/
• Troubleshooting an Application
Contractors Only.
• Hands-on Labs
• Final Review
Course Duration Course Fee
Facility Explorer MSTP Field Controller Engineering
Monday-Friday
Course #4714, 3.0 CEU Class ends at
$2500
per student
11:30 a.m. on Friday
Participants will receive an overview of the Facility Explorer MSTP Course Topics ENROLL NOW
field controller system, create programs from standard tree systems • Intro To The Facility
using the Programmable Controller and Commissioning tool, then Explorer MSTP Field
connect to Bluetooth® and Zigbee® connections and download Controllers System
code into the controllers after setting up the hardware and software • Application Creation
to communicate properly. VIRTUAL COURSE
• Peer-to-Peer
AVAILIBLE!
• Mobile Access Portal
For End Users and/or Authorized Building Controls Specialists/ • Transferring Files
Contractors Only. • IO Commissioning
• Commissioning Programs
• Zigbee (copyright) Wireless
Communications
• Logic Blocks
• PRAC+ and PID
• Sequencers
• Hands on Labs
26 HOME www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.comCourse Duration Course Fee
Metasys® System Extended Architecture
Hardware and Troubleshooting Monday-Friday
$2500
Class ends at
Course #4718, 3.0 CEU 11:30 a.m. on Friday
per student
ENROLL NOW
This hands-on course provides experienced Metasys® users with Course Topics
valuable diagnostic and troubleshooting skills on system hardware.
• Metasys® extended architecture Review
Discussions and exercises cover the full range of Metasys® Network
• Network Architecture
products, with an emphasis on communication solutions and other
• Ethernet Level Connections (BACnet® over IP)
commonly experienced problems. • Controller Trunk Level Connections
(BACnet®/MSTP, N2, and LON)
Required Prerequisites: • SA Bus Review
Due to the material covered in the class, anyone wanting to enroll in • Network Automation Engines, Network Integration
this class is required to have had attended courses #389 and #4707 • Engines and Network Controller Engines Including:
or #353. • NAE common hardware platform
• NAE Diagnostics, how to run them and evaluate them.
For End Users and/or Authorized Building Controls Specialists/ • Introduction to the SCT Tool
Contractors Only. • Short Review FEC Controller Family; FECs, VMAs and
IOM Modules, and TEC Controllers
• Calibrating Sensors and Actuators and Applying
Metering Devices
• Downloading Controllers
• Metasys® System Extended Architecture Database
overview and organization best practices
• ADS/ADX Servers – their role and features in Metasys®
and best practices for backup of data files
Course Duration Course Fee
Facility Explorer (FX) Supervisory Controllers
Engineering/N4 Certification Monday-Friday
$3500
Testing will end at
Course #4720, 3.4 CEU per student
5:00 p.m. on Friday
Basic instruction on design, engineer and program projects using Course Topics ENROLL NOW
FXWorkbench Pro running on Niagara 4. Testing for Niagara 4 •C ourse Introduction and • Setting up Email
Technical Certification Program (TCP) taken at end of the course. System Overview Notification of Alarms
•S upervisory Controller User • Graphics
Recommended Prerequisites: Interface Overview • Controller Summary
Students must have a strong knowledge of Johnson Controls field • FXWorkbench Pro Overview • Hierarchy Services
controllers. A familiarization of building automation systems (BAS) • Creating a Station • Commissioning and
would also be beneficial. • Adding N2 and BACNet® Backing up a Station
MSTP Controllers and Points • Auto discovering
For End Users and/or Authorized Building Control Specialists/ • Extension Manager and BACNet® points
Contractors only. Extensions • Using Standard
Note: Early payment discount does NOT apply. If a student scores • Control Logic Graphics for Other
between 50% - 69% on their certification exam they may retake • Tagging Objects Devices
the certification exam for $1000.00. This exam will be emailed and • Scheduling • Enterprise Connectivity
once the practical is completed, arrangements must be made by the • Defining Users and Roles • Technical Certification
student to get their database back to their test proctor to be graded. • Customizing Access Program (TCP)
No exceptions will be made for any score below 50% Permissions Examination
www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com HOME 27INSTRUCTOR-LED VIRTUAL LEARNING COURSES 28 HOME www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com
Course Duration Course Fee
YK High Pressure Centrifugal Operations/Maintenance
Tuesday-Thursday
Course #3102, 2.0 CEU Class ends at
$1300
per student
3:30 p.m. on Thursday
ENROLL NOW
Students will learn about the internal workings of the YK high-pressure Course Topics
centrifugal single-stage compressor, oil return system, OptiView Control
• Centrifugal compressor theory of operation
Center, and other components and subsystems. A comprehensive
Controller Tool (PCT)
review of the preventive maintenance schedule and system capacity
• YK chiller design and component functionality
checkout procedure is also covered.
• YK seasonal start-up
• OptiView basics: application, terminology
• OptiView architecture: component identification,
component location
• Maintenance
• OptiView operation: screen navigation,
interpretation, and modification
• Troubleshooting
• Warranty
• Evaluating chiller
• Simulator demonstration
Course Duration Course Fee
YCAV Air Cooled Rotary Screw Liquid Chillers
Tuesday-Thursday
Course #3103, 2.0 CEU Class ends at
$1300
per student
3:30 p.m. on Thursday
ENROLL NOW
This three-day course teaches service personnel about the YCAV Course Topics
Chiller features, including the screw compressor, system ancillary
• Navigating the new User Interface
components, unit operation, and maintenance.
• Screw chiller basics
• Basic electronics
• VSD basics
• VSD and control panel architecture
• Operation and sequencing
• Latitude simulator exercises
• Information and safety, handling and storage
• VSD operation and faults
• Maintenance
• Unit troubleshooting
• Simulator demonstration
www.johnsoncontrols.com/institute • 800.524.8540 • 414.524.4286 • email: cg-customer.registrar@jci.com HOME 29You can also read
