Beam Steering Revolution - Beam Steering Loudspeaker Systems Developed in Germany.
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Beam Steering Revolution. Beam Steering Loudspeaker Systems Developed in Germany. 2020 English
More than 50 Years of Experience. Legendary CADAC Sound Quality: A Global Standard. Premium Sound Quality since 1968. CADAC is a worldwide respected and leading manufacturer of professional mixing consoles with more than 50 years of experience. It has been at the heart of countless theatre productions including “Billy Elliot”, “We Will Rock You”, “Hairspray” and “Lion King”. CADAC was and is the console of choice for concert touring for acts such as “Van Halen”, “Rolling Stones”, “Andrea Bocelli”, “Tom Jones” and “Bryan Adams”. The operations for mixing consoles are based in the United Kingdom since 1968. 1968 2011 2020 In 1968, CADAC was founded in the CADAC launched the revolutionary CADAC opened a new chapter in United Kingdom by Clive Green, CDC8, an innovative digital mixing the history: The launch of digitally Adrian Kerridge, David Bott and console, which was developed for the steerable loudspeaker systems, which Charles Billet. The name was derived highly demanding worlds of concert set a new standard in professional from the rst letter of each of their touring and xed installation. The sound reinforcement. The company Christian names; Clive, Adrian, David CDC8 redened customer is leading once again with beam And Charles – hence CADAC. This expectations of digital mixing. With steering technology and delivers a was the start of a story, dominating the previously unachievably low latency, full solution, from the microphone theatre market with nearly 70% of audio quality, and ease-of-use, input to the speaker output. theatre shows using CADAC desks. CADAC set a new standard.
One Brand, two Divisions.
The Global Player with specialized Divisions.
Research & Development: Made in Germany.
CADAC started into a new era and set up a new base for research & development in Germany, which is
responsible for loudspeakers, digital controllers and power ampliers. The German R&D group
constantly endeavors to combine the best audio quality and highest performance with unique usability.
As a rst milestone, CADAC introduces high-end beam-steering loudspeakers for touring and xed
installation.
A Masterpiece of Engineering.
Over the past few years, new approaches of beam steering loudspeakers could be found sporadically
on the market. However, their operation and programming were usually very complicated, the
functionality limited and mostly designed only as a work-alone speaker. We are convinced that
loudspeakers and electronics should be developed and operated together as integrated systems and
at once. This ensures that our users and installers always achieve the maximum performance with best
efciency possible. All devices should be connectcted in one network. All loudpeakers should be fully
steerable, including subwoofers.
One Brand, two Divisions.
The high level of technology requires specialized and independent divisions. The division for CADAC
digital mixing consoles is based at Luton, Bedfordshire (UK). The division for professional
loudspeakers, digital controllers and power ampliers operates with a separate competence center
and branch ofce in Germany.
System Overview.
CA124 CP124
12 x 4" + 36 x 1" 12 x 4" + 36 x 1"
2-Way Powered Speaker 2-Way Powered Speaker
48 DSP + 48 Amp.Ch. 12 DSP + 12 Amp.Ch. + 12 x passive X-Over
600 W (RMS) 600 W (RMS)
25600 FIR Taps 7168 FIR Taps
DANTE© DANTE©
110° x up to 90° (HxV) 110° x up to 90° (HxV)
X606 X606 CARDIOID
24 x 1" + 12 x 3.5" + 6 x 6.5" 6 x 6.5"
3-Way Powered Speaker Powered Cardioid Subwoofer
42 DSP + 42 Amp.Ch. 6 DSP + 6 Amp.Ch.
2400 W (RMS) 1200 W (RMS)
22528 FIR Taps 4096 FIR Taps
DANTE© DANTE©
100° x up to 90° (HxV) Steerable
X310 X310 CARDIOID
13 x 1" + 6 x 5" + 3 x 10" 3 x 10"
3-Way Powered Speaker Powered Cardioid Subwoofer
22 DSP + 22 Amp.Ch. 3 DSP + 3 Amp.Ch.
2700 W (RMS) 1500 W (RMS)
12228 FIR Taps 2560 FIR Taps
DANTE© DANTE©
90° x up to 90° (HxV) Steerable
X115 S215
1 x 12" + 1 x 15" 2 x 15"
Powered Cardioid Subwoofer Powered Subwoofer
2 DSP + 2 Amp.Ch. 2 DSP + 2 Amp.Ch.
4000 W (RMS) 4000 W (RMS)
2048 FIR Taps 2048 FIR Taps
DANTE© DANTE©
Steerable Steerable
S218
2 x 18"
Powered Subwoofer
2 DSP + 2 Amp.Ch.
4000 W (RMS)
2048 FIR Taps
DANTE©
Steerable
Conventional. Conventional Speakers and Column Systems. Conventional systems are based on xed vertical coverage. High sound pressure is needed to reach all listener areas, which even increases the reection problems. Stage Coverage Conventional Speakers and Column Systems Limited long-throw efciency and reections from walls, ceiling, balcony and oor Conventional Line Array Systems. Line array systems have been state-of-the art for a long time. However, such directional sound systems are mostly based on mechanical curving. The resulting problems in the acoustics were compensated as best as possible by electronics. The acoustic results were usually good enough only in low-reection rooms or outdoors. But especially indoors, line array systems show several disadvantages. Stage Coverage Conventional Line Array Systems Loud and efcient, but with reections from walls, ceiling and oor, showing side-lobes and unwanted noise behind the system
Fullrange Beam Steering. CADAC Beam Steering Systems. CADAC beam steering systems provide high-end audio performance, unmatched beam forming precision, selective sound distribution and an all in one software solution with a most simplied user interface. Reections can be reduced to a minimum, while the speech intelligibility is improved signicantly. The vertical opening angle can be adjusted by software, while the coverage is accurately adjusted to the listener area(s). The all in one software enables always for best possible results, even in acoustically very demaning rooms. Stage Coverage CADAC Beam Steering Speakers Reducing reections from walls, ceiling and oor to a minimum, delivering exceptionally even sound pressure levels and audio quality from the rst to the last row, offering more direct sound and very high speech intelligibility while reducing disturbing sound outside of the listener area. CADAC Multi Beam Technology. In larger scenarios with two or more listener areas, CADAC beam steering systems can project independent beams to the listener areas. The user does not need to calculate anything: Add audience areas to the software and run the optimizer. The software will send the required beam forming information directly to the DSPs inside the loudspeakers. In larger system congurations, cardioid subwoofers can be added rear to the main system, which will reduce unwanted sound pressure behind the speakers (on stage) and will improve the lower mid frequency distribution at the front. Stage Coverage CADAC Multi Beam Steering Systems Reducing reections from walls, ceiling and oor to a minimum, delivering exceptionally even sound pressure levels and audio quality from the rst to the last row, offering more direct sound and very high speech intelligibility while reducing disturbing sound outside of the listener area and avoiding reections from unwanted areas (balconies, etc.)
A Masterpiece of Software.
The All in One Solution: Prediction, System Design & Control with direct DSP Link.
CADAC.Net Software
The CADAC.Net software is a unique combination of system control and remote, comprehensive prediction, system design,
optimized direct array mapping, direct DSP link in real time, FIR multi beam steering control, completed with extensive export
functions (EASE and CATT).
System Manager Design Tool
• Central controller for all connected devices • Powerful electro-acoustic system design
• Direct access to high level DSP settings and prediction tool
(recall, edit and store presets) • Supporting interactive design process of loudspeakers
• Level meters and limiter activity control of all • Automatic FIR MLC Minimum Latency Concept
physical channels (live mode) • Automatic CLS CADAC Limiter Suite (look-ahead peak
limiters, RMS limiters for thermal protection and
power supply limiter
Optimized Direct Array Mapping Tablet and Smartphone App
• Extensive mapping calculation tool
Additionally to the CADAC.Net PC software, the tablet
• Based on complex measured loudspeaker data
and smartphone app is available for basic functions
• Includes mechanical data, drawings and rigging
(volume control, IIR master EQs, delay, etc.)
• Advanced beam forming algorithms
• Single and multi-beam functionality
• AUTO EQ function with direct DSP link to all connected
devices in real time
1. Add Audience Area and Speaker System Dene one or more listener areas (different shapes available). Select speaker type any system size and add to installed position (includes balloons and data on mechanics). Rigging and weight information is displayed and can be exported to a PDF report. 2. Optimizer and Beam Steering 3. Auto EQ and Send to DSP Open the Optimizer function and start beam forming Open the Auto EQ function, set target frequency calculation. (unlimited listener areas and multi beam response. System will calculate EQ settings and send functions available). them to DSPs in loudspeakers. • SPL Distribution (constant or -3dB) • Mute or unmute ceiling, oor and wall • Run Optimizer for best possible sound distribution 4. System Adjustment completed The whole system is perfectly tuned to the scenario and dened listener areas including fullrange speakers, subwoofers and cardioid loudspeakers.
A Masterpiece of Engineering.
System Control, Digital Audio, Premium Technologies and Automatic Rigging.
Audio and Command Connectivity
All models include DANTE©, AES3 and C-LINK interfaces. The analog inputs are equipped with dual range A/D converters, which
enable more than 138 dB S/N ratio. Three redundancy levels with automatic input switching in redundancy mode ensure for a very
high operational safety. The on-board Gbit switch enables the connection to ethernet interfaces of MCU.
Analog
C-LINK Protocol
The C-LINK protocol is a unique combination of digital audio, command and control – all via just one wire. The C-LINK interface is
available in all loudspeaker models including subwoofers and shows one RJ45 input and one RJ45 link connector (to the next cabinet).
The protocol includes daisy chaining, which allows for automatic system detection and connects all devices in a group of loudspeakers.
Source Signal LAN
(Digital Mixer, etc.)
Speaker
Analog
C-LINK 1 x RJ45 (digital audio, command and control)
Speaker
C-LINK 1 x RJ45 (digital audio, command and control)
SpeakerPremium Power Amplication
Using high efciency class-D power amplier modules, all beam steering loudspeakers and subwoofers feature very high power,
excellent audiophile sonic performance, enormous headroom and ultra-low distortion even at full load. Equipped with short circuit
protection, DC protection, under voltage protection, temperature and overload protection, all amplier modules ensure for a long-
term reliable premium amplication without compromise. The integrated switch mode power supplies enable universal AC mains
operation. Automatically adaptive to any mains voltage between 85 V and 265 V, the propriety high efciency, compact power supplies
deliver regulated power and unmatched sonic performance anywhere in the world.
Advanced Automatic Rigging System
All fullrange and mid-high loudspeakers as well as all cardioid subwoofers are equipped
with a fully integrated yware without removable pins or any other smaller parts.
The certied locking system is fully integrated and allows for double safety and
stability. All subwoofers are equipped with automatic locking hardware.
PressCA124
48 Channel Beam Forming Array Module
12 x 4" + 36" x 1" Conguration
CA124 | 48 Channel Steerable Array
The CA124 beam forming array module combines a comprehensive package in
all relevant disciplines without compromise. With the CA124, even at most
demanding and complex sound installations can be realized. The combination of
mapping optimization and direct array denition is the most comprehensive and
powerful loudspeaker management system on the market. The CA124 is a self-
powered 2-way high-end beam forming array loudspeaker, which features 12 x 4"
Max. 10 x CA124 = 14.8 Meter Acoustic Length
wideband woofers and 36 x 1" dome tweeters. Due to the fully integrated
connection hardware, the column can be stacked to realize larger systems with up
to 14 meters of acoustic length. With the small source distances, the beamforming
capabilities of the column are excellent even at very high frequencies. Internally,
one CA124 has 48 amplier and 48 DSP channels. The CADAC DSP-core module
platform is integrated with the amplier section into the loudspeaker. Cabinets are
electrically connected by the CADAC C-Link audio and command interface. The
CCP control and prediction software can connect to the array via LAN for
command and control, Auto-EQ and to calculate sound prediction on listener
areas. With the CMAP (mapping optimization mode), the vertical dispersion can
be adjusted and optimized according to the listener area.
Applications
Main purpose is the xed installation for speech transmission in acoustically
very demanding venues like:
Ÿ Houses of worship
Ÿ Plenum and convention centers
Ÿ Stadiums and arenas (lobbies, forecourts)
Ÿ Transportation terminals (airports, train stations, bus stations)
Due to its very high acoustic quality, it can also be used for sound
reinforcement in conferences and, together with subwoofers, also for music
reproduction in small and medium venues.
AnalogCA124
Design Electronically Steerable 2-Way Array Speaker
Frequency Response ±3 dB 90 Hz - 20 kHz
HF-Way SPL (1W/1m) 118 dB (1W per transducer = 36 x 1W)
HF-Way max. SPL (peak, calc) 136 dB
LF-Way SPL (1W/1m) 112 dB (1W per transducer = 12 x 1W)
LF-Way max. SPL (peak, calc) 132 dB
Horizontal Coverage 110° nominal
Vertical Opening Angles Continuous in 0.1° Steps adjustable
up to 90°, ±45° Steering Angle
Digital Signal Processors 2
DSP Channels 48
Independent Limiters 48 (RMS and Look-Ahead)
FIR Filter Taps 48 x 512 FIR taps (FABS© Beam Steering)
+ 1024 FIR taps for AUTO EQ
A/D 24-Bit / 96 kHz
S/N Ratio (unweighted) 138 dB (Dual Range Converters)
EQ 20-band EQ Equalizer
(Bell, Lowpass ±6/12 dB, Highpass ±6/12 dB,
Lowshelf ±6/12 dB, Highshelf ±6/12 dB,
Allpass ±6/12 dB),
Frequency Range from 20 Hz up to 24 kHz,
Gain from -80 dB up to +20 dB,
Quality from 0.4 up to 1000 (for Notch lters)
System Latency 2 ms + 1 ms for a look-ahead peak limiter
+ 5 ms for beamforming lters
Beam Control Steerable from 90 Hz and higher
Directivity from 90 Hz and higher
(when used as single cabinet)
Ÿ 600 W RMS amplier power
Output Power HF 36 Channels, each 50 W @ 4 Ohms (RMS) Ÿ 48 x 512 FIR taps (FABS© Beam Steering)
Output Power LF 12 Channels, each 50 W @ 4 Ohms (RMS) + 1024 FIR taps for AUTO EQ
Output Power Total 600 W (RMS) / 1260 W (Peak)
Ÿ All-in-one software: Command, control, beam forming
Transducers HF 36 x high precision 1" dome tweeter and AUTO EQing (direct DSP link)
(LAVOCE© custom made) Ÿ Artifact-free sound transmission from 90 Hz - 20 kHz
Transducers LF 12 x long excursion 4" woofer Ÿ 48 ampliers and 48 DSP channels
(FAITAL© custom made)
Ÿ Horizontal coverage of 110° (-6dB beamwidth)
Connections Ÿ AUTO-recognizing speaker types and
AES3 / Analog Input 1 x Neutrik© XLR-3, switchable by software system size (daisy chaining)
C-Link Up 1 x Neutrik© RJ45, Signal, Command Control Ÿ C-LINK all-in-one cabling: digital audio,
to next higer Cabinet
command and control
C-Link Down 1 x Neutrik© RJ45, Signal, Command Control
to next lower Cabinet
Ÿ Unrivaled accurate full-range controllability
LAN / DANTE© Port 1 x Neutrik© RJ45 Ÿ Selective sound distribution (multi-zone)
Ÿ Connection hardware from cabinet to cabinet (up to 10)
Enclosure Extruded Aluminum Prole
Ÿ Premium speech intelligibility and sound transmission
Grille Steel Ball Impact with Acoustic Foam Backing
Finish Powder Coating
Ÿ Evenly high sound pressure level
Mounting Fully integrated C-CON Connection Hardware Ÿ 3 auto-redundancy levels (DANTE©, AES3, analog)
Dimensions (W x H x D) 134 mm x 1480.5 mm x 157.5 mm Ÿ Smartphone / tablet app for basic control
Ÿ DANTE© interface as standard
Mains Voltage 85-265 Volts, 50-60 Hz (Auto-Switching)
Power Supply Switch Mode Power Supply
Ÿ Dual-range A/D converters (138 dB S/N ratio)
Cooling Passive Ÿ Widerange power supply (85-265 VAC)
Power Input Connector IEC Input Connector, lockable Ÿ Multi split beam functionalityCP124
12 Channel Beam Forming Array Module
12 x 4" + 36" x 1" Conguration with passive 12 Channel Crossover
CP124 | 12 Channel Steerable Array
The CP124 beam forming array module with internal passive crossovers between
LF and HF way. It is intended as basic beamforming column loudspeaker for the
CADAC product range. The combination of mapping optimization and direct
array denition is the most comprehensive and powerful loudspeaker
management system on the market. The CP124 is a self-powered 2-way high-end
beam forming array loudspeaker, which features 12 x 4" wideband woofers and
Max. 10 x CP124 = 14.8 Meter Acoustic Length
12 passive crossovers, for 36 x 1" dome tweeters. Due to the fully integrated
connection hardware, the column can be stacked to realize larger systems with up
to 14 meters of acoustic length. Internally, one CP124 has 12 amplier and 12
DSP channels. The CADAC DSP-core module platform is integrated with the
amplier section into the loudspeaker. Cabinets are electrically connected by the
CADAC C-Link audio and command interface. The CCP control and prediction
software can connect to the array via LAN for command and control, Auto-EQ and
to calculate sound prediction on listener areas. With the CMAP (mapping
optimization mode), the vertical dispersion can be adjusted and optimized
according to the listener area.
Applications
Main purpose is the xed installation for speech transmission in acoustically
very demanding venues like:
Ÿ Houses of worship
Ÿ Plenum and convention centers
Ÿ Stadiums and arenas (lobbies, forecourts)
Ÿ Transportation terminals (airports, train stations, bus stations)
Due to its high acoustic quality, it can also be used for sound reinforcement in
conferences and, together with subwoofers, also for music reproduction in
small and medium venues.
AnalogCP124
Design Electronically Steerable 2-Way Array Speaker
Frequency Response ±3 dB 90 Hz - 20 kHz
SPL (1W/1m) 112 dB (1W per channel, each 1x4"+3x1"=12 x 1W)
max. SPL (peak, calc) 128 dB
Horizontal Coverage 110° nominal
Vertical Opening Angles Continuous in 0.1° Steps adjustable
up to 90°, ±45° Steering Angle
Digital Signal Processors 1
DSP Channels 12
Independent Limiters 12 (RMS and Look-Ahead)
FIR Filter Taps 12 x 512 FIR taps (FABS© Beam Steering)
+ 1024 FIR taps for AUTO EQ
A/D 24-Bit / 96 kHz
S/N Ratio (unweighted) 138 dB (Dual Range Converters)
EQ 20-band EQ Equalizer
(Bell, Lowpass ±6/12 dB, Highpass ±6/12 dB,
Lowshelf ±6/12 dB, Highshelf ±6/12 dB,
Allpass ±6/12 dB),
Frequency Range from 20 Hz up to 24 kHz,
Gain from -80 dB up to +20 dB,
Quality from 0.4 up to 1000 (for Notch lters)
System Latency 2 ms + 1 ms for a look-ahead peak limiter
+ 5 ms for beamforming lters
Beam Control Steerable from 90 Hz and higher
Directivity from 90 Hz and higher
(when used as single cabinet) Ÿ 600 W RMS amplier power
Ÿ 12 x 512 FIR taps (FABS© Beam Steering)
Output Power LF 12 Channels, each 50 W @ 4 Ohms (RMS) + 1024 FIR taps for AUTO EQ
Output Power Total 600 W (RMS) / 660 W (Peak)
Ÿ All-in-one software: Command, control, beam forming
Transducers HF 36 x high precision 1" dome tweeter and AUTO EQing (direct DSP link)
(LAVOCE© custom made) Ÿ Artifact-free sound transmission from 90 Hz - 20 kHz
Transducers LF 12 x long excursion 4" woofer Ÿ 12 ampliers and 12 DSP channels
(FAITAL© custom made)
Ÿ Horizontal coverage of 110° (-6dB beamwidth)
Connections Ÿ AUTO-recognizing speaker types and
AES3 / Analog Input 1 x Neutrik© XLR-3, switchable by software system size (daisy chaining)
C-Link Up 1 x Neutrik© RJ45, Signal, Command Control Ÿ C-LINK all-in-one cabling: digital audio,
to next higer Cabinet
command and control
C-Link Down 1 x Neutrik© RJ45, Signal, Command Control
to next lower Cabinet Ÿ Unrivaled accurate full-range controllability
LAN / DANTE© Port 1 x Neutrik© RJ45 Ÿ Selective sound distribution (multi-zone)
Ÿ Connection hardware from cabinet to cabinet (up to 10)
Enclosure Extruded Aluminum Prole
Ÿ Premium speech intelligibility and sound transmission
Grille Steel Ball Impact with Acoustic Foam Backing
Finish Powder Coating
Ÿ Evenly high sound pressure level
Mounting Fully integrated C-CON Connection Hardware Ÿ 3 auto-redundancy levels (DANTE©, AES3, analog)
Dimensions (W x H x D) 134 mm x 1480.5 mm x 157.5 mm Ÿ Smartphone / tablet app for basic control
Ÿ DANTE© interface as standard
Mains Voltage 85-265 Volts, 50-60 Hz (Auto-Switching)
Power Supply Switch Mode Power Supply
Ÿ Dual-range A/D converters (138 dB S/N ratio)
Cooling Passive Ÿ Widerange power supply (85-265 VAC)
Power Input Connector IEC Input Connector, lockable Ÿ Multi split beam functionalityX606
42 Channel Beam Forming Array Module
6 x 6.5" ported + 12 x 3.5" + 24" x 1" Conguration
X606 | 42 Channel Steerable Array
The X606 beam forming array module combines a comprehensive package in all
relevant disciplines without compromise. With the X606, even at most demanding
and complex sound installations can be realized. The combination of mapping
optimization and direct array denition is the most comprehensive and powerful
loudspeaker management system on the market. The X606 is a self-powered 3-
way high-end beam forming array loudspeaker, which features 6 x 6.5" ported
woofers for LF, 12 x 3.5" woofers for the MF and 24 x 1" dome tweeters for the HF.
The X606 can be used as single cabinet with programmable vertical dispersion
(point source functionality) and as beamforming array for xed installation as well
as for mobile applications. If one X606 is combined with one X606-CARDIOD
cabinet, the system will have cardioid dispersion for the LF range. The array is used
as straight line in most applications as the coverage on listener areas is adjusted by
beamforming. Due to the fully integrated connection hardware, the column can
be stacked to realize larger systems with up to 10 meters of acoustic length. With
the small source distances, the beamforming capabilities of the column are
excellent even at very high frequencies. Internally, one X606 has 42 amplier and
42 DSP channels. The CADAC DSP-core module platform is integrated with the
amplier section into the loudspeaker. Cabinets are electrically connected by the
CADAC C-Link audio and command interface. The CCP control and prediction
software can connect to the array via LAN for command and control, Auto-EQ and
to calculate sound prediction on listener areas. With the CMAP (mapping
optimization mode), the vertical dispersion can be adjusted and optimized
according to the listener area.
Applications
The X606 was developed for xed installation as well as mobile sound reinforcement
and can be used for music and speech transmission in acoustically very demanding venues.
Ÿ Very high output, high delity steerable array for multiple applications
(performing arts, production, corporate and house of worship)
Ÿ Flown in arrays of up to 10 cabinets (with or without X606-CARDIOID)
Ÿ Used alone, main loudspeaker in smaller rooms (point source application)
AnalogX606
Design Electronically Steerable 3-Way Array Speaker
Frequency Response ±3 dB 75 Hz - 20 kHz
HF-Way SPL (1W/1m) 118 dB (1W per transducer = 24 x 1W)
HF-Way max. SPL (peak, calc) 132 dB
MF-Way SPL (1W/1m) 112 dB (1W per transducer = 12 x 1W)
MF-Way max. SPL (peak, calc) 129 dB
LF-Way SPL (1W/1m) 106 dB (1W per transducer = 6 x 1W)
LF-Way max. SPL (peak, calc) 130 dB
Horizontal Coverage 100° nominal
Vertical Opening Angles Continuous in 0.1° Steps adjustable
up to 90°, ±45° Steering Angle
Digital Signal Processors 2
DSP Channels 42
Independent Limiters 42 (RMS and Look-Ahead)
FIR Filter Taps 42 x 512 FIR taps (FABS© Beam Steering)
+ 1024 FIR taps for AUTO EQ
A/D 24-Bit / 96 kHz
S/N Ratio (unweighted) 138 dB (Dual Range Converters)
EQ 20-band EQ Equalizer
(Bell, Lowpass ±6/12 dB, Highpass ±6/12 dB,
Lowshelf ±6/12 dB, Highshelf ±6/12 dB,
Allpass ±6/12 dB),
Frequency Range from 20 Hz up to 24 kHz,
Gain from -80 dB up to +20 dB,
Quality from 0.4 up to 1000 (for Notch lters)
System Latency 2 ms + 1 ms for a look-ahead peak limiter
+ 5 ms for beamforming lters
Beam Control Steerable from 90 Hz and higher
Directivity from 90 Hz and higher
(when used as single cabinet)
Output Power HF 24 Channels, each 50 W @ 4 Ohms (RMS)
Output Power MF 12 Channels, each 50 W @ 4 Ohms (RMS)
Output Power LF 6 Channels, each 360 W @ 4 Ohms (RMS)
Output Power Total 2400 W (RMS) / 3590 W (Peak)
Transducers HF 24 x high precision 1" dome tweeter Ÿ 2400 W RMS amplier power
(LAVOCE© custom made) Ÿ 42 x 512 FIR taps (FABS© Beam Steering)
Transducers MF 12 x long excursion 3.5" woofer + 1024 FIR taps for AUTO EQ
(FAITAL© custom made)
Transducers LF 6 x long excursion 6.5" woofer (ported)
Ÿ All-in-one software: Command, control, beam forming
(B&C© custom made) and AUTO EQing (direct DSP link)
Ÿ Artifact-free sound transmission from 60 Hz - 20 kHz
Connections
©
Ÿ 42 ampliers and 42 DSP channels
Analog Input 1 x Neutrik XLR-3
Ÿ Horizontal coverage of 100° (-6dB beamwidth)
AES3 Input 1 x Neutrik© XLR-3
AES3 Link Output 1 x Neutrik© XLR-3 Ÿ AUTO-recognizing speaker types and
C-Link Up 1 x Neutrik© RJ45, Signal, Command Control system size (daisy chaining)
to next higer Cabinet Ÿ C-LINK all-in-one cabling: digital audio,
C-Link Down 1 x Neutrik© RJ45, Signal, Command Control
command and control
to next lower Cabinet
LAN / DANTE© Port 1 x Neutrik© RJ45 (GBit Switch)
Ÿ Unrivaled accurate full-range controllability
Ÿ Selective sound distribution (multi-zone)
Enclosure Extruded Aluminum Prole Ÿ Connection hardware from cabinet to cabinet (up to 10)
Grille Steel Ball Impact with Acoustic Foam Backing
Ÿ Premium speech intelligibility and sound transmission
Finish Powder Coating
Mounting Fully integrated C-CON Connection Hardware
Ÿ Evenly high sound pressure level
Dimensions (W x H x D) 210 mm x 1002 mm x 345 mm Ÿ 3 auto-redundancy levels (DANTE©, AES3, analog)
Ÿ Smartphone / tablet app for basic control
Mains Voltage 85-265 Volts, 50-60 Hz (Auto-Switching) Ÿ DANTE© interface as standard
Power Supply Switch Mode Power Supply
Cooling Passive
Ÿ Dual-range A/D converters (138 dB S/N ratio)
Power Input Connector NEUTRIK© powerCON© TRUE1© Ÿ Widerange power supply (85-265 VAC)
Power Link Output Connector NEUTRIK© powerCON© TRUE1© Ÿ Multi split beam functionalityX606 CARDIOID
6 Channel Beam Forming Cardioid Subwoofer
6 x 6.5" ported Conguration
X606 CARDIOID | 6 Channel Cardioid Subwoofer
The X606 CARDIOID is a self-powered 3-channel high-end cardioid subwoofer,
which features 6 x 6.5" ported woofers and unique software controllable cardioid
radiation pattern. The power output of 1200 W (RMS) ensures for very high SPL
down to a frequency of 75 Hz. The cardioid disperson avoids unwanted energy
behind the system and reduces the reveberant eld at low frequencies while
providing highest accuracy in low frequency sound emission. The combination of
mapping optimization and direct cardioid radition pattern denition is the most
comprehensive and powerful loudspeaker management system on the market. It
is seamlessly constructed into the software, cabling and connection concept. The
cabinet can be used as a cardioid extension or normal LF extension for the X606. It
shares the same outer dimensions and yware and can be own together with the
X606 as one line like conventional LF extensions or own behind the X606 with the
cardoid ying frame to set up a beamforming cardoid line array system. Due to the
fully integrated connection hardware, the subwoofer can be stacked to realize
larger systems with up to 10 meters of acoustic length. Internally, one X606
CARDIOID has 6 amplier and 6 DSP channels. The CADAC DSP-core module
platform is integrated with the amplier section into the loudspeaker. Cabinets are
electrically connected by the CADAC C-Link audio and command interface. The
CCP control and prediction software can connect to the array via LAN for
command and control, Auto-EQ and to calculate sound prediction on listener
areas. With the CMAP (mapping optimization mode), the vertical dispersion can
be adjusted and optimized according to the listener area.
Applications
The X606 CARDIOID was developed for xed installation as well as mobile sound reinforcement
and can be used for music and speech transmission in acoustically very demanding venues.
Ÿ Very high output, high delity cardioid subwoofer for multiple applications
(performing arts, production, corporate and house of worship)
Ÿ Flown cardioid extension behind X606 in arrays of up to 10 cabinets
Ÿ Flown LF extension for X606 in one line application)
AnalogX606 CARDIOID
Design Electronically Adjustable 3-Way Cardioid Subw.
Frequency Response ±3 dB 75 Hz - 300 Hz
LF-Way SPL (1W/1m) 106 dB (1W per transducer = 6 x 1W)
LF-Way max. SPL (peak, calc) 130 dB
Horizontal Coverage Adjustable Cardioid Coverage (Software)
Vertical Opening Angles Adjustable by beamforming (Software)
if used in array
Digital Signal Processors 1
DSP Channels 6
Independent Limiters 6 (RMS and Look-Ahead)
FIR Filter Taps 6 x 512 FIR taps (FABS© Beam Steering)
+ 1024 FIR taps for AUTO EQ
A/D 24-Bit / 96 kHz
S/N Ratio (unweighted) 138 dB (Dual Range Converters)
EQ 20-band EQ Equalizer
(Bell, Lowpass ±6/12 dB, Highpass ±6/12 dB,
Lowshelf ±6/12 dB, Highshelf ±6/12 dB,
Allpass ±6/12 dB),
Frequency Range from 20 Hz up to 24 kHz,
Gain from -80 dB up to +20 dB,
Quality from 0.4 up to 1000 (for Notch lters)
System Latency 2 ms + 1 ms for a look-ahead peak limiter
+ 5 ms for beamforming lters
Beam Control Steerable from 75 Hz up to 300 Hz
Directivity from 75 Hz up to 300 Hz
(when used in array)
Output Power LF 6 Channels, each 360 W @ 4 Ohms (RMS)
Output Power Total 1200 W (RMS) / 2880 W (Peak) Ÿ 1200 W RMS amplier power
Ÿ 6 x 512 FIR taps (FABS© Beam Steering)
Transducers LF 6 x long excursion 6.5" woofer (ported)
(B&C© custom made) + 1024 FIR taps for AUTO EQ
Ÿ All-in-one software: Command, control, cardioid
Connections radiation pattern and AUTO EQing (direct DSP link)
Analog Input 1 x Neutrik© XLR-3
Ÿ Artifact-free sound transmission from 75 Hz - 300 Hz
AES3 Input 1 x Neutrik© XLR-3
AES3 Link Output 1 x Neutrik© XLR-3
Ÿ 6 ampliers and 6 DSP channels
C-Link Up 1 x Neutrik© RJ45, Signal, Command Control Ÿ Avoids unwanted energey behind the system
to next higer Cabinet Ÿ AUTO-recognizing speaker types and
C-Link Down 1 x Neutrik© RJ45, Signal, Command Control
system size (daisy chaining)
to next lower Cabinet
LAN / DANTE© Port 1 x Neutrik© RJ45
Ÿ C-LINK all-in-one cabling: digital audio,
command and control
Enclosure Marine Plywood Ÿ Unrivaled accurate low-frequency controllability
Grille Steel Ball Impact with Acoustic Foam Backing Ÿ Connection hardware from cabinet to cabinet (up to 12)
Finish Impact Resistant Black Paint
Mounting Fully integrated C-CON Connection Hardware
Ÿ Premium long-excursion transducers for high-end
Dimensions (W x H x D) 210 mm x 1002 mm x 345 mm sound transmission
Ÿ 3 auto-redundancy levels (DANTE©, AES3, analog)
Mains Voltage 85-265 Volts, 50-60 Hz (Auto-Switching) Ÿ Smartphone / tablet app for basic control
Power Supply Switch Mode Power Supply
Cooling Passive
Ÿ DANTE© interface as standard
Power Input Connector NEUTRIK© powerCON© TRUE1© Ÿ Dual-range A/D converters (138 dB S/N ratio)
Power Link Output Connector NEUTRIK© powerCON© TRUE1© Ÿ Widerange power supply (85-265 VAC)X310
22 Channel Beam Forming High Performance Array Module
3 x 10" ported + 6 x 5" + 13" x 1" Waveguide Conguration
X310 | 22 Channel Steerable Performance Array
The X310 beam forming array module combines a comprehensive package in all relevant disciplines without compromise. With the
X310, even at most demanding and complex sound installations can be realized. The combination of mapping optimization and direct
array denition is the most comprehensive and powerful loudspeaker management system on the market. The X310 is a self-powered
3-way high-end beam forming array loudspeaker, which features 3 x 10" ported woofers for LF, 6 x 5" woofers for the MF and 13 x 1"
compression drivers for the HF, which are mounted onto waveguide horns. The X310 can be used as single cabinet with programmable
vertical dispersion (point source functionality) and as beamforming array for xed installation as well as for mobile applications. If one
X310 is combined with one X310-CARDIOID cabinet, the system will have cardioid dispersion for the LF range. The array is used as
straight line in most applications as the coverage on listener areas is adjusted by beamforming. Due to the fully integrated connection
hardware, the cabinet can be stacked to realize larger systems with up to 10 meters of acoustic length. With the small source distances,
the beamforming capabilities of the column are excellent even at very high frequencies. Internally, one X310 has 22 amplier and 22
DSP channels. The CADAC DSP-core module platform is integrated with the amplier section into the loudspeaker. Cabinets are
electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to
the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping
optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.
Applications
The X310 was developed for xed installation as well as mobile concert sound reinforcement and can be used for music and speech
transmission in acoustically very demanding venues.
Ÿ Very high output, high delity steerable array for multiple applications
Ÿ (concert sound, world production, corporate and house of worship)
Ÿ Flown in arrays of up to 12 cabinets (with or without X310-CARDIOID)
Ÿ Used alone, main loudspeaker in smaller rooms (point source application)
AnalogX310
Design Electronically Steerable 3-Way Array Speaker
Frequency Response ±3 dB 60 Hz - 20 kHz
HF-Way SPL (1W/1m) 126 dB (1W per transducer = 13 x 1W)
HF-Way max. SPL (peak, calc) 140 dB
MF-Way SPL (1W/1m) 111 dB (1W per transducer = 6 x 1W)
MF-Way max. SPL (peak, calc) 134 dB
LF-Way SPL (1W/1m) 105 dB (1W per transducer = 3 x 1W)
LF-Way max. SPL (peak, calc) 130 dB
Horizontal Coverage 90° nominal
Vertical Opening Angles Continuous in 0.1° Steps adjustable
up to 90°, ±45° Steering Angle
Digital Signal Processors 1
DSP Channels 22
Independent Limiters 22 (RMS and Look-Ahead)
FIR Filter Taps 22 x 512 FIR taps (FABS© Beam Steering)
+ 1024 FIR taps for AUTO EQ
A/D 24-Bit / 96 kHz
S/N Ratio (unweighted) 138 dB (Dual Range Converters)
EQ 20-band EQ Equalizer
(Bell, Lowpass ±6/12 dB, Highpass ±6/12 dB,
Lowshelf ±6/12 dB, Highshelf ±6/12 dB,
Allpass ±6/12 dB),
Frequency Range from 20 Hz up to 24 kHz,
Gain from -80 dB up to +20 dB,
Quality from 0.4 up to 1000 (for Notch lters)
System Latency 2 ms + 1 ms for a look-ahead peak limiter
+ 5 ms for beamforming lters
Beam Control Steerable from 60 Hz and higher
Directivity from 60 Hz and higher
(when used as single cabinet)
Output Power HF 13 Channels, each 100 W @ 8 Ohms (RMS)
Output Power MF 6 Channels, each 500 W @ 8 Ohms (RMS)
Output Power LF 3 Channels, each 1000 W @ 8 Ohms (RMS)
Output Power Total 2700 W (RMS) / 5910 W (Peak)
Transducers HF 13 x high precision 1" compression driver Ÿ 2700 W RMS amplier power
(B&C© custom made) Ÿ 22 x 512 FIR taps (FABS© Beam Steering)
Transducers MF 6 x long excursion 5" woofer + 1024 FIR taps for AUTO EQ
(B&C© custom made)
Transducers LF 3 x long excursion 10" woofer (ported)
Ÿ All-in-one software: Command, control, beam forming
(B&C© custom made) and AUTO EQing (direct DSP link)
Ÿ Artifact-free sound transmission from 60 Hz - 20 kHz
Connections
©
Ÿ 22 ampliers and 22 DSP channels
Analog Input 1 x Neutrik XLR-3
Ÿ Horizontal coverage of 90° (-6dB beamwidth)
AES3 Input 1 x Neutrik© XLR-3
AES3 Link Output 1 x Neutrik© XLR-3 Ÿ AUTO-recognizing speaker types and
C-Link Up 1 x Neutrik© RJ45, Signal, Command Control system size (daisy chaining)
to next higer Cabinet Ÿ C-LINK all-in-one cabling: digital audio,
C-Link Down 1 x Neutrik© RJ45, Signal, Command Control
command and control
to next lower Cabinet
LAN / DANTE© Port 1 x Neutrik© RJ45 Ÿ Unrivaled accurate full-range controllability
Ÿ Selective sound distribution (multi-zone)
Enclosure Marine Plywood Ÿ Connection hardware from cabinet to cabinet (up to 12)
Grille Steel Ball Impact with Acoustic Foam Backing
Ÿ Premium speech intelligibility and sound transmission
Finish Impact Resistant Black Paint
Mounting Fully integrated C-CON Connection Hardware
Ÿ Evenly high sound pressure level
Dimensions (W x H x D) 400 mm x 834 mm x 675 mm Ÿ 3 auto-redundancy levels (DANTE©, AES3, analog)
Ÿ Smartphone / tablet app for basic control
Mains Voltage 85-265 Volts, 50-60 Hz (Auto-Switching) Ÿ DANTE© interface as standard
Power Supply Switch Mode Power Supply
Cooling Passive
Ÿ Dual-range A/D converters (138 dB S/N ratio)
Power Input Connector NEUTRIK© powerCON© TRUE1© Ÿ Widerange power supply (85-265 VAC)
Power Link Output Connector NEUTRIK© powerCON© TRUE1© Ÿ Multi split beam functionalityX310 CARDIOID
3 Channel Beam Forming Cardioid Subwoofer
3 x 10" ported Conguration
X310 CARDIOID | 3 Channel Cardioid Subwoofer
The X310 CARDIOID is a self-powered 3-channel high-end cardioid subwoofer, which features 3 x 10" ported woofers and unique
software controllable cardioid radiation pattern. The power output of 1500 W (RMS) ensures for very high SPL down to a frequency of
60 Hz. The cardioid disperson avoids unwanted energy behind the system and reduces the reveberant eld at low frequencies while
providing highest accuracy in low frequency sound emission. The combination of mapping optimization and direct cardioid radition
pattern denition is the most comprehensive and powerful loudspeaker management system on the market. It is seamlessly
constructed into the software, cabling and connection concept. The cabinet can be used as a cardioid extension or normal LF extension
for the X310. It shares the same outer dimensions and yware and can be own together with the X310 as one line like conventional LF
extensions or own behind the X310 with the cardoid ying frame to set up a beamforming cardoid line array system. Due to the fully
integrated connection hardware, the subwoofer can be stacked to realize larger systems with up to 10 meters of acoustic length.
Internally, one X310 CARDIOID has 3 amplier and 3 DSP channels. The CADAC DSP-core module platform is integrated with the
amplier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The
CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound
prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized
according to the listener area.
Applications
The X310 CARDIOID was developed for xed installation as well as mobile sound reinforcement and can be used for music and speech
transmission in acoustically very demanding venues.
Ÿ Very high output, high delity cardioid subwoofer for multiple applications
(performing arts, production, corporate and house of worship)
Ÿ Flown cardioid extension behind X310 in arrays of up to 12 cabinets
Ÿ Flown LF extension for X310 in one line application)
AnalogX310 CARDIOID
Design Electronically Adjustable 3-Way Cardioid Subw.
Frequency Response ±3 dB 60 Hz - 200 Hz
LF-Way SPL (1W/1m) 105 dB (1W per transducer = 6 x 1W)
LF-Way max. SPL (peak, calc) 130 dB
Horizontal Coverage Adjustable Cardioid Coverage (Software)
Vertical Opening Angles Adjustable by beamforming (Software)
if used in array
Digital Signal Processors 1
DSP Channels 3
Independent Limiters 3 (RMS and Look-Ahead)
FIR Filter Taps 3 x 512 FIR taps (FABS© Beam Steering)
+ 1024 FIR taps for AUTO EQ
A/D 24-Bit / 96 kHz
S/N Ratio (unweighted) 138 dB (Dual Range Converters)
EQ 20-band EQ Equalizer
(Bell, Lowpass ±6/12 dB, Highpass ±6/12 dB,
Lowshelf ±6/12 dB, Highshelf ±6/12 dB,
Allpass ±6/12 dB),
Frequency Range from 20 Hz up to 24 kHz,
Gain from -80 dB up to +20 dB,
Quality from 0.4 up to 1000 (for Notch lters)
System Latency 2 ms + 1 ms for a look-ahead peak limiter
+ 5 ms for beamforming lters
Beam Control Steerable from 60 Hz up to 200 Hz
Directivity from 60 Hz up to 200 Hz
(when used in array)
Output Power LF 3 Channels, each 500 W @ 4 Ohms (RMS)
Output Power Total 1500 W (RMS) / 2880 W (Peak) Ÿ 1500 W RMS amplier power
Ÿ 3 x 512 FIR taps (FABS© Beam Steering)
Transducers LF 3 x long excursion 10" woofer (ported)
(B&C© custom made) + 1024 FIR taps for AUTO EQ
Ÿ All-in-one software: Command, control, cardioid
Connections radiation pattern and AUTO EQing (direct DSP link)
Analog Input 1 x Neutrik© XLR-3
Ÿ Artifact-free sound transmission from 60 Hz - 200 Hz
AES3 Input 1 x Neutrik© XLR-3
AES3 Link Output 1 x Neutrik© XLR-3
Ÿ 3 ampliers and 3 DSP channels
C-Link Up 1 x Neutrik© RJ45, Signal, Command Control Ÿ Avoids unwanted energey behind the system
to next higer Cabinet Ÿ AUTO-recognizing speaker types and
C-Link Down 1 x Neutrik© RJ45, Signal, Command Control
system size (daisy chaining)
to next lower Cabinet
LAN / DANTE© Port 1 x Neutrik© RJ45
Ÿ C-LINK all-in-one cabling: digital audio,
command and control
Enclosure Marine Plywood Ÿ Unrivaled accurate low-frequency controllability
Grille Steel Ball Impact with Acoustic Foam Backing Ÿ Connection hardware from cabinet to cabinet (up to 12)
Finish Impact Resistant Black Paint
Mounting Fully integrated C-CON Connection Hardware
Ÿ Premium long-excursion transducers for high-end
Dimensions (W x H x D) 400 mm x 834 mm x 675 mm sound transmission
Ÿ 3 auto-redundancy levels (DANTE©, AES3, analog)
Mains Voltage 85-265 Volts, 50-60 Hz (Auto-Switching) Ÿ Smartphone / tablet app for basic control
Power Supply Switch Mode Power Supply
Cooling Passive
Ÿ DANTE© interface as standard
Power Input Connector NEUTRIK© powerCON© TRUE1© Ÿ Dual-range A/D converters (138 dB S/N ratio)
Power Link Output Connector NEUTRIK© powerCON© TRUE1© Ÿ Widerange power supply (85-265 VAC)X115
2 Channel Cardioid Subwoofer
1 x 15" + 1 x 12" Conguration
X115 | 2 Channel Cardioid Subwoofer
The X115 is a self-powered 2-way high-end cardioid subwoofer, which features 1 x 15" ported woofer at the front and 1 x 12" ported
woofer at the rear side. The power output of 4000 W (RMS) ensures for very high SPL down to a frequency of 35 Hz. The subwoofer
features a unique software controllable cardioid radiation pattern. The cardioid disperson avoids unwanted energy behind the system
and reduces the reveberant eld at low frequencies while providing highest accuracy in low frequency sound emission. The
combination of mapping optimization and direct cardioid radition pattern denition is the most comprehensive and powerful
loudspeaker management system on the market. The X115 can be combined with all products of the CADAC beam forming range. It
can be used as ground stack horizontal subwoofer array as well as own together with the X310 or X606 system in large venues for very
high SPL demands in concert applications. Internally, one X115 has 2 amplier and 2 DSP channels. The CADAC DSP-core module
platform is integrated with the amplier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio
and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-
EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be
adjusted and optimized according to the listener area. Due to the fully integrated connection hardware, the subwoofer can be arrayed
to realize larger systems with up to 7.2 meters of acoustic length.
Applications
The X115 was developed for xed installation as well as mobile sound reinforcement and can be
used for low frequency transmission in acoustically very demanding venues.
Ÿ Very high output, high delity cardioid subwoofer for multiple applications
(performing arts, production, corporate and house of worship)
Ÿ Flown in arrays of up to 10 cabinets (in combination with X310 or X606)
Ÿ Ground stacked with up to 4 cabinets (in combination with X310,
X606, X606 CARDIOID or CA124/CP124)
AnalogX115
Design Electronically Adjustable 2-Way Cardioid Subw.
Frequency Response ±3 dB 35 Hz - 120 Hz
Front-Way SPL (1W/1m) 96 dB
Front-W. max. SPL (peak, calc) 127 dB
Rear-Way SPL (1W/1m) 94 dB
Rear-W. max. SPL (peak, calc) 125 dB
Adjustable Cardioid Coverage (Software)
Horizontal Coverage Adjustable by beamforming (Software)
Vertical Opening Angles if used in array
1
Digital Signal Processors 2
DSP Channels 2 (RMS and Look-Ahead)
Independent Limiters 2 x 512 FIR taps (FABS© Beam Steering)
FIR Filter Taps + 1024 FIR taps for AUTO EQ
24-Bit / 96 kHz
A/D 138 dB (Dual Range Converters)
S/N Ratio (unweighted) 20-band EQ Equalizer
EQ (Bell, Lowpass ±6/12 dB, Highpass ±6/12 dB,
Lowshelf ±6/12 dB, Highshelf ±6/12 dB,
Allpass ±6/12 dB),
Frequency Range from 20 Hz up to 24 kHz,
Gain from -80 dB up to +20 dB,
Quality from 0.4 up to 1000 (for Notch lters)
System Latency 2 ms + 1 ms for a look-ahead peak limiter
+ 5 ms for beamforming lters
Beam Control Steerable from 35 Hz up to 120 Hz
Directivity from 35 Hz up to 120 Hz
(when used in array)
Output Power Front Woofer 1 Channel, 2000 W @ 4 Ohms (RMS)
Output Power Rear Woofer 1 Channel, 2000 W @ 4 Ohms (RMS)
Output Power Total 4000 W (RMS) / 4000 W (Peak)
Transducer Front 1 x long excursion 15" woofer Ÿ 4000 W RMS amplier power
(B&C© custom made)
Ÿ 2 x 512 FIR taps (FABS© Beam Steering)
Transducer Rear 1 x long excursion 12" woofer
(B&C© custom made) + 1024 FIR taps for AUTO EQ
Ÿ All-in-one software: Command, control, cardioid
Connections
©
radiation pattern and AUTO EQing (direct DSP link)
Analog Input 1 x Neutrik XLR-3
Ÿ Artifact-free sound transmission from 35 Hz - 120 Hz
AES3 Input 1 x Neutrik© XLR-3
AES3 Link Output 1 x Neutrik© XLR-3 Ÿ 2 ampliers and 2 DSP channels
C-Link Up 1 x Neutrik© RJ45, Signal, Command Control Ÿ Avoids unwanted energey behind the system
to next higer Cabinet Ÿ AUTO-recognizing speaker types and
C-Link Down 1 x Neutrik© RJ45, Signal, Command Control
system size (daisy chaining)
to next lower Cabinet
LAN / DANTE© Port 1 x Neutrik© RJ45
Ÿ C-LINK all-in-one cabling: digital audio,
command and control
Enclosure Marine Plywood Ÿ Unrivaled accurate low-frequency controllability
Grille Steel Ball Impact with Acoustic Foam Backing Ÿ Connection hardware from cabinet to cabinet (up to 10)
Finish Impact Resistant Black Paint
Mounting Fully integrated C-CON Connection Hardware
Ÿ Premium long-excursion transducers for high-end
Dimensions (W x H x D) 490 mm x 660 mm x 775 mm sound transmission
Ÿ 3 auto-redundancy levels (DANTE©, AES3, analog)
Mains Voltage 85-265 Volts, 50-60 Hz (Auto-Switching) Ÿ Smartphone / tablet app for basic control
Power Supply Switch Mode Power Supply
Cooling Passive
Ÿ DANTE© interface as standard
Power Input Connector NEUTRIK© powerCON© TRUE1© Ÿ Dual-range A/D converters (138 dB S/N ratio)
Power Link Output Connector NEUTRIK© powerCON© TRUE1© Ÿ Widerange power supply (85-265 VAC)S215
2 Channel High Performance Subwoofer
2 x 15" Conguration, 4000 W (RMS)
S215 | 2 Channel Dual 15" Subwoofer
The S215 is a self-powered high-end subwoofer, which features 2 x 15" ported woofers. The power output of 4000 W (RMS) ensures for
very high SPL down to a frequency of 40 Hz. It can be combined with all products of the CADAC© range and be used as subwoofer
extension in ground stack conguration for point sources or line arrays and can be also used as ground stack horizontal subwoofer
array. The DSP-electronic has 2 power ampliers and 2 DSP channels. Internally, one S215 has 2 amplier and 2 DSP channels. The
CADAC DSP-core module platform is integrated with the amplier section into the loudspeaker. Cabinets are electrically connected by
the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for
command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the
dispersion can be adjusted and optimized according to the listener area for the application of subwoofer arrays. CMAP enables to
create arbitrary radiation patterns for the listener area with ground stack horizontal arrays.
Applications
The S215 was developed for xed installation as well as mobile sound reinforcement and can be used for
low frequency transmission in acoustically very demanding venues.
Ÿ Very high output, high delity subwoofer for multiple applications
(performing arts, production, corporate and house of worship)
Ÿ Ground stacked or as subwoofer array (in combination with all
CADAC© beam forming loudspeaker models)
AnalogS215
Design Electronically Adjustable 2-Way Subwoofer
Frequency Response ±3 dB 40 Hz - 120 Hz
LF-Way SPL (1W/1m) 102 dB (1W per transducer = 2 x 1W)
LF-Way max. SPL (peak, calc) 133 dB
Horizontal Coverage Omnidirectional
Subwoofer Array Dispersion Adjustable by Software
if used in array
Digital Signal Processors 1
DSP Channels 2
Independent Limiters 2 (RMS and Look-Ahead)
FIR Filter Taps 2 x 512 FIR taps (FABS© Beam Steering)
+ 1024 FIR taps for AUTO EQ
A/D 24-Bit / 96 kHz
S/N Ratio (unweighted) 138 dB (Dual Range Converters)
EQ 20-band EQ Equalizer
(Bell, Lowpass ±6/12 dB, Highpass ±6/12 dB,
Lowshelf ±6/12 dB, Highshelf ±6/12 dB,
Allpass ±6/12 dB),
Frequency Range from 20 Hz up to 24 kHz,
Gain from -80 dB up to +20 dB,
Quality from 0.4 up to 1000 (for Notch lters)
System Latency 2 ms + 1 ms for a look-ahead peak limiter
+ 5 ms for beamforming lters
Output Power LF 2 Channels, each 2000 W @ 4 Ohms (RMS)
Output Power Total 4000 W (RMS) / 8000 W (Peak) Ÿ 4000 W RMS amplier power
Transducers LF 2 x long excursion 15" woofer (ported)
Ÿ 2 x 512 FIR taps (FABS© Beam Steering)
(B&C© custom made) + 1024 FIR taps for AUTO EQ
Ÿ All-in-one software: Command, control, radiation
Connections pattern and AUTO EQing (direct DSP link)
Analog Input 1 x Neutrik© XLR-3
Ÿ Artifact-free sound transmission from 40 Hz - 120 Hz
AES3 Input 1 x Neutrik© XLR-3
AES3 Link Output 1 x Neutrik© XLR-3 Ÿ 2 ampliers and 2 DSP channels
C-Link Up 1 x Neutrik© RJ45, Signal, Command Control Ÿ Avoids unwanted energey behind the system
to next higer Cabinet Ÿ AUTO-recognizing speaker types and
C-Link Down 1 x Neutrik© RJ45, Signal, Command Control
system size (daisy chaining)
to next lower Cabinet
LAN / DANTE© Port 1 x Neutrik© RJ45 Ÿ C-LINK all-in-one cabling: digital audio,
command and control
Enclosure Marine Plywood Ÿ Unrivaled accurate low-frequency controllability
Grille Steel Ball Impact with Acoustic Foam Backing
Ÿ Connection hardware from cabinet to cabinet (up to 10)
Finish Impact Resistant Black Paint
Mounting Fully integrated C-CON Connection Hardware
Ÿ Premium long-excursion transducers for high-end
Dimensions (W x H x D) 962 mm x 505.2 mm x 590 mm sound transmission
Ÿ 3 auto-redundancy levels (DANTE©, AES3, analog)
Mains Voltage 85-265 Volts, 50-60 Hz (Auto-Switching) Ÿ Smartphone / tablet app for basic control
Power Supply Switch Mode Power Supply
Cooling Passive
Ÿ DANTE© interface as standard
Power Input Connector NEUTRIK© powerCON© TRUE1© Ÿ Dual-range A/D converters (138 dB S/N ratio)
Power Link Output Connector NEUTRIK© powerCON© TRUE1© Ÿ Widerange power supply (85-265 VAC)S218
2 Channel High Performance Subwoofer
2 x 18" Conguration, 4000 W (RMS)
S218 | 2 Channel Dual 18" Subwoofer
The S218 is a self-powered high-end subwoofer, which features 2 x 18" ported woofers. The power output of 4000 W (RMS) ensures for
very high SPL down to a frequency of 35 Hz. It can be combined with all products of the CADAC© range and be used as subwoofer
extension in ground stack conguration for point sources or line arrays and can be also used as ground stack horizontal subwoofer
array. The DSP-electronic has 2 power ampliers and 2 DSP channels. Internally, one S218 has 2 amplier and 2 DSP channels. The
CADAC DSP-core module platform is integrated with the amplier section into the loudspeaker. Cabinets are electrically connected by
the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for
command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the
dispersion can be adjusted and optimized according to the listener area for the application of subwoofer arrays. CMAP enables to
create arbitrary radiation patterns for the listener area with ground stack horizontal arrays.
Applications
The S218 was developed for xed installation as well as mobile sound reinforcement and can be used for
low frequency transmission in acoustically very demanding venues.
Ÿ Very high output, high delity subwoofer for multiple applications
(performing arts, production, corporate and house of worship)
Ÿ Ground stacked or as subwoofer array (in combination with all
CADAC© beam forming loudspeaker models)
AnalogS218
Design Electronically Adjustable 2-Way Subwoofer
Frequency Response ±3 dB 35 Hz - 120 Hz
LF-Way SPL (1W/1m) 102 dB (1W per transducer = 2 x 1W)
LF-Way max. SPL (peak, calc) 133 dB
Horizontal Coverage Omnidirectional
Subwoofer Array Dispersion Adjustable by Software
if used in array
Digital Signal Processors 1
DSP Channels 2
Independent Limiters 2 (RMS and Look-Ahead)
FIR Filter Taps 2 x 512 FIR taps (FABS© Beam Steering)
+ 1024 FIR taps for AUTO EQ
A/D 24-Bit / 96 kHz
S/N Ratio (unweighted) 138 dB (Dual Range Converters)
EQ 20-band EQ Equalizer
(Bell, Lowpass ±6/12 dB, Highpass ±6/12 dB,
Lowshelf ±6/12 dB, Highshelf ±6/12 dB,
Allpass ±6/12 dB),
Frequency Range from 20 Hz up to 24 kHz,
Gain from -80 dB up to +20 dB,
Quality from 0.4 up to 1000 (for Notch lters)
System Latency 2 ms + 1 ms for a look-ahead peak limiter
+ 5 ms for beamforming lters
Output Power LF 2 Channels, each 2000 W @ 4 Ohms (RMS)
Output Power Total 4000 W (RMS) / 8000 W (Peak) Ÿ 4000 W RMS amplier power
Transducers LF 2 x long excursion 18" woofer (ported)
Ÿ 2 x 512 FIR taps (FABS© Beam Steering)
(B&C© custom made) + 1024 FIR taps for AUTO EQ
Ÿ All-in-one software: Command, control, radiation
Connections pattern and AUTO EQing (direct DSP link)
Analog Input 1 x Neutrik© XLR-3
Ÿ Artifact-free sound transmission from 40 Hz - 120 Hz
AES3 Input 1 x Neutrik© XLR-3
AES3 Link Output 1 x Neutrik© XLR-3 Ÿ 2 ampliers and 2 DSP channels
C-Link Up 1 x Neutrik© RJ45, Signal, Command Control Ÿ Avoids unwanted energey behind the system
to next higer Cabinet Ÿ AUTO-recognizing speaker types and
C-Link Down 1 x Neutrik© RJ45, Signal, Command Control
system size (daisy chaining)
to next lower Cabinet
LAN / DANTE© Port 1 x Neutrik© RJ45 Ÿ C-LINK all-in-one cabling: digital audio,
command and control
Enclosure Marine Plywood Ÿ Unrivaled accurate low-frequency controllability
Grille Steel Ball Impact with Acoustic Foam Backing
Ÿ Connection hardware from cabinet to cabinet (up to 10)
Finish Impact Resistant Black Paint
Mounting Fully integrated C-CON Connection Hardware
Ÿ Premium long-excursion transducers for high-end
Dimensions (W x H x D) 1126 mm x 523.5 mm x 775 mm sound transmission
Ÿ 3 auto-redundancy levels (DANTE©, AES3, analog)
Mains Voltage 85-265 Volts, 50-60 Hz (Auto-Switching) Ÿ Smartphone / tablet app for basic control
Power Supply Switch Mode Power Supply
Cooling Passive
Ÿ DANTE© interface as standard
Power Input Connector NEUTRIK© powerCON© TRUE1© Ÿ Dual-range A/D converters (138 dB S/N ratio)
Power Link Output Connector NEUTRIK© powerCON© TRUE1© Ÿ Widerange power supply (85-265 VAC)You can also read
