EV Charging Catalogue - Mobility & eMobility - CIRCONTROL
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Mobility & eMobility EV Charging Catalogue
Circontrol‘s eMobility Division comprises a set of
products and solutions designed to facilitate Electric
Vehicle (EV) charging.
We aim to provide user-friendly solutions for electric
vehicle charging in different scenarios, such as urban
streets, intercity roads and public or private car parks,
for multiple or single users.
Our product portfolio offers a wide product range that
covers slow charging (AC) and fast charging (DC).
Circontrol is a European Leader in EVSE with a presence
in 60 countries and more than 3,500 DC chargers and
80,000 charging points installed worldwide.
EV Chargers
Application by market segments 6
WB eHome 8
WB eNext 10
Home BeOn 12
WB eNext Park 14
WB Smart 16
WB eVolve Smart 18
Post eVolve Smart 20
Master-Slave 22
Raption 50 26
Raption 100 28
Raption 150 30
EV Charging Software 32
Load Management (DLM) 34
Usage Management (Cosmos) 36
After-sales Support 38
www.circontrol.com 3
Who drives an EV?
The presence of an EV charger
on the street or a silent EV cruising
down the road were rare sights not
so long ago, but they are becoming
increasingly common, and forecasts
indicate they will be an everyday reality
sooner rather than later.
Forecasts show sales of
electric vehicles increasing
up to 11 million in 2025 and
then surging to 30 million in
2030.
By 2040, 55% of all new car
sales and 33% of the global
fleet will be electric.*
*According to Bloomberg New Energy Finance
2017 2025
2030
4 www.circontrol.com
This rising interest in EVs makes
knowing more about these early
adopters even more important.
Who are they?
Mostly they are
Males 40 years old Richer than the average Living in small cities
Why did they buy an EV?
Main reason
Environmental Financial savings Interest in new Driving benefits
benefits technology (instant torque or
smooth & quiet)
www.circontrol.com 5
Application by market segments
Charging Station for Electric Vehicles
6 www.circontrol.com
WB
WB WB WB Post Raption Raption Raption
eNext
eHome eNext eVolve eVolve 50 100 150
Park
Destination
eBus
Service station
Car park
Business
Home
Public
www.circontrol.com 7
Wallbox eHome
The best quality-price ratio for domestic charging
Application
Designed to be installed (both indoors and outdoors) at
private homes, communal blocks, companies and other
places where user authentication is not a requirement.
Concept Design
Taking into account that a domestic charger is often
considered an appliance, an attractive design and a small
size are key attributes to be addressed.
The Wallbox eHome series also offers other attributes
such as low-cost, robustness, and user-friendly operation.
Product highlights
• Compatible with the Home BeOn sensor • Its well-designed shape allows the cable to
(accessory), when combined with eHome, be rolled up, keeping it tidy and protecting
it is able to dynamically adjust the electric it from breaking while the charger is not in
vehicle’s consumption according to the use.
available power of the installation. This
avoids the risk of a power cut and/or having • Simple user operation thanks to its
to upgrade the existing installation (resulting Plug ‘n’ Charge mode that avoids user
in a lower initial investment). authentication by means of an RFID card,
phone of equivalent method.
• The LED bar at the front not only informs
the user about the charger’s status (e.g. • This series also includes a selector switch
operative, faulty...), but also the EV charging that facilitates the setup of the charger’s
status: charging (dynamic blue light) vs maximum output current (reducing
charged (static blue light). installation time and cost).
• The door at the front with key access and • Remote charging activation is also offered
electrical protections (optional) not only by means of an ON/OFF external input
provides easy access in the event of a signal (e.g. timer).
power cut, but also protects the user from
electric shocks. It can also be used as • The Wallbox eHome series features a
a user authentication method (using the reserved space in case you want to include
protection as an ON/OFF switch). your own branding on it.
• The charger’s housing is made of ABS • Several security protections are available
plastic, which is both robust and UV as optional, including 6mA DC leakage
resistant, providing protection against detector.
mechanical stress and severe environmental NEW:
conditions (increasing the charger’s • Communication RS485 Modbus in order
lifespan, meaning it does not need to be to integrate with external HEMS (Home
replaced in just a few years). Energy Management Systems) for smart
management and monitoring purpose.
8 www.circontrol.com
Wallbox eHome Series
General Specifications
Enclosure rating IP54 / IK10* Optional devices
Enclosure material ABS-PCV0 Meter* Active Energy
Class 1 (IEC 62053-21)
Operating temperature -5 °C to +45 ºC
Low temperature kit* -30 ºC to +45 ºC
Ambient temperature storage -40 ºC to +60 ºC
Safety protection* RCD Type A (30mA) + 6mA DC
Operating humidity 5% to 95% Non-condensing
RCD Type B (30mA)
Light beacon RGB colour indicator
Power limit control** Home BeON sensor
Current setup Onboard DIP switch
Cable support Metallic holder
Dimensions (D x W x H) 115x180x315 mm
Customisation Logo customisation
Weight 4 kg
Communication** NEW RS485 Modbus
External input Remote charging activation
*Not available for socket models.
*IK08 in some components appended to the body, i.e., beacon light. **Single-phase models only.
Model Specifications
Model T1C32 T2C32 T2S32 T2C16 TRI T2S16 TRI
AC power supply 1P + N + PE 1P + N + PE 1P + N + PE 3P + N + PE 3P + N + PE
AC voltage 230 VAC +/-10% 230 VAC +/-10% 230 VAC +/-10% 400 VAC +/-10% 400 VAC +/-10%
Maximum current 32 A 32 A 32 A 16 A 16 A
Maximum power 7.4 kW 7.4 kW 7.4 kW 11 kW 11 kW
Connection Type 1 Cable Type 2 Cable Type 2 Socket Type 2 Cable Type 2 Socket
Home BeON Compatible
Intelligent sensor for single-phase installations
Home BeON is a new step forward in domestic EV charging,
allowing you to charge your vehicle while using your appliances.
Its intelligent sensor, easily added to the standard domestic
fuse box, dynamically adjusts electric vehicle’s consumption if
the home’s system is about to be overloaded.
Contracted Power
h h h h h h h h h h
www.circontrol.com 9
Wallbox eNext
The perfect EV charger for your needs
Application
Designed to be installed (both indoors and outdoors) at private homes,
communal blocks, workplaces and car parks.
Concept Design
eNext has been designed to simplify the charging process. We
developed Presence Recognition, a feature that allows the user
to start charging without any interaction with the device. As soon
as the approved user is detected by Bluetooth and the cable is
connected to the car, the charging process starts.
In terms of the exterior design, we kept black and white as the
core design colours while introducing curved lines and rounded
shapes. The appropriate proportions and the perfect size, along
with the piano black combined with matt white makes the eNext
series the best choice to match any wall.
Product highlights
• An app to control and configure the eNext: • DC leakage detection can be ordered as an
language configuration, user authentication, optional extra. Thus, in conjunction with the
wallbox diagnosis and firmware upgrades, latching contactor and RCD A, the highest
among others. safety protection is guaranteed.
• Presence recognition via smartphone • Compatible with the Home BeOn sensor
Bluetooth, so user authentication is confirmed (accessory), when combined with eNext, it is
simply by proximity. able to dynamically adjust the electric vehicle’s
consumption according to the available power
• Remote charging activation is also offered by of the installation.
means of an ON/OFF external input signal (e.g.
timer). • The LED bar at the front not only informs the
user about the charger’s status (e.g. operative,
• Timetable programming to adjust the charging faulty...), but also the EV charging status:
session to the hourly energy rates. charging (dynamic blue light) vs charged
(static blue light).
• Ready for internal integration of electrical
protections. • The charger’s housing is made of ABS plastic,
which is both robust and UV resistant, providing
• Includes latching contactor detection that protection against mechanical stress and
meets with IEC 61851-1 for safety protection. severe environmental conditions.
• The Wallbox eNext series features a reserved
space in case you want to include your own
branding on it.
10 www.circontrol.comWallbox eNext Series
General Specifications
Enclosure rating IP54 / IK10* Optional devices
Enclosure material ABS / PC Low temperature kit -30 ºC to +45 ºC
Operating temperature -5 °C to +45 ºC Protections MCB (Curve C)
DC 6mA leakage detection
Ambient temperature storage -40 ºC to +60 ºC
RCBO (RCD Type A + MCB)
Operating humidity 5% to 95% Non-condensing
Power limit control* Home BeOn sensor
Light beacon RGB colour indicator
Type 2 socket protection Locking System
Power limit control Mode 3 PWM control according
Shutter
to
ISO/IEC 61851-1 Type 1 straight + cable roller
Dimensions (D x W x H) 200 x 335 x 315 mm Type 1 spring + connector holder
Tethered cable
Weight 4 kg Type 2 straight + cable roller
External input Remote charging activation Type 2 spring + connector holder
Wireless communication Bluetooth v4.2 + BLE Pedestal
*IK08 in some components appended to the body, i.e., beacon light. Customisation Logo customisation
*Single-phase models only.
Model Specifications
Model S T
AC power supply 1P + N + PE 3P + N + PE
AC input voltage 230 VAC +/-10% 400 VAC +/- 10%
Maximum input current 32 A 32 A
Maximum input power 7.4 kW 22 kW
Number of plugs 1 1
Maximum output power per outlet 7.4 kW 22 kW
Maximum output current per outlet 32 A 32 A
AC output voltage 230 VAC (1P + N + PE) 400 VAC (3P + N + PE)
Socket Type 1 x Type 2 Socket 1 x Type 2 Socket
Pedestal Promotional Totem
A good choice A smart
when there is marketing tool
no wall. for car dealers,
showrooms,
exhibitions,
etc.
1550 mm
1500 mm
Material: Weight: Dimensions Material: Weight: Dimensions
Aluminium 5754 10 kg (H x W x D): Polystyrene 4 kg (H x W x D):
1500x373x150 mm (1.5 mm wide) 1550x400x250 mm
www.circontrol.com 11Home BeON
The ultimate EV charger synchronised with your home
• Would you like to charge your EV faster without
the need for a costly installation upgrade?
• Would you like to avoid any risk of power cuts
when using appliances and charging the EV at
the same time?
• Would you like to have all this without a huge
investment?
Home BeOn is a new step forward in domestic EV
charging, allowing you to charge your vehicle while
using your appliances.
Its intelligent sensor, easily added to the standard domestic fuse box,
dynamically adjusts the electric vehicle’s consumption if the home‘s system is
about to be overloaded.
Home BeON measures and interprets the housing consumption, generates
the corresponding signal and sends it to the Wallbox eHome charging station,
which interprets and modifies its output current accordingly.
Home BeON uses the moments when the house is using less power to charge
your EV, saving money and energy.
+ +
12 www.circontrol.comCompatible with eHome and eNext
Intelligent sensor
Contracted Power
h h h h h h h h h h
Product dimensions
It is so small that will fit everywhere
315 mm
30 mm
60 mm
180 mm
www.circontrol.com 13Wallbox eNext Park
The ultimate design for a Wallbox with communications
Application
Designed to be installed (both indoors and outdoors) at private
homes, communal blocks, workplaces and car parks.
Concept Design
Nowadays, the concept of an intelligent car park combined with
sophisticated users demands intelligent EV chargers with the
possibility of having connection to a cloud-based software or
backend system.
In terms of the exterior design, we kept black and white as the
core design colours while introducing curved lines and rounded
shapes. The appropriate proportions and the perfect size, along
with the piano black combined with matt white makes the eNext
series the best choice to match any wall.
Product highlights
For Charge Point Operators / Owners For Charge Point Users
• The Integrated Load Management allows • Clear charging instructions and operating
for a lower TCO (Total Cost of Ownership) by status are shown using a backlit display,
charging two EVs simultaneously even when increasing user satisfaction, especially useful
the charger is not supplied with its maximum when the charger has been previously reserved
output power. by another user.
• The charger’s housing is made of ABS plastic • The Wallbox eNext Park series offers flexible
which is both robust and UV resistant, providing authentication, meaning that the user can
protection against mechanical stress and authenticate either before or after connecting
severe environmental conditions. the cable to the EV. Additionally, the
authentication process can also be disabled for
• In terms of communications, either through the Plug ‘n’ Charge mode.
the Ethernet port (by default) or 4G/3G/
GPRS modem (optional), the charger can be
connected to a back-office system (by means
of OCPP), obtaining benefits such as user
management, billing, remote error diagnostics,
etc.
• Ready for Dynamic Load Management
network integration. The Wallbox eNext Park
series can be integrated with Circontrol’s
SCADA software, making simultaneous EV
charging easier, faster and cheaper.
14 www.circontrol.comWallbox eNext Park Series
General Specifications
Network connection 10/100BaseTX (TCP-IP) Optional devices
Interface protocol OCPP 1.5 or OCPP 1.6J Low temperature kit -30 ºC to +45 ºC
Enclosure rating IP54 / IK10* Type 2 socket protection Shutter
Enclosure material ABS / PC Type 1 straight + cable roller
Operating temperature -5°C to 45ºC Tethered cable Type 1 spring + connector holder
Ambient temperature storage -40°C to + 60Cº Type 2 straight + cable roller
Operating humidity 5% to 95% Non-condensing Type 2 spring + connector holder
Light beacon RGB colour indicator Wireless Communications 4G / 3G / GPRS / GSM
Display Multi-language LCD Pedestal
Power limit control Mode 3 PWM control according to Compatible with DML
ISO/IEC 61851-1
Dimensions (D x W x H) 200x335x315mm Customisation Logo customisation
Weight 4kg
RFID Reader ISO / IEC14443A
MIFARE Classic/DESFire EV1
ISO 18092 / ECMA - 340
NFC 13.56MHz
Meter MID Class 1 - EN50470-3
Type 2 socket protection Locking system
*IK08 in some components appended to the body, i.e., beacon light.
Model Specifications
Model S T SME TME S Two
AC power supply 1P + N + PE 3P + N + PE 1P + N + PE 3P + N + PE 1P + N + PE
AC input voltage 230 VAC +/-10% 400 VAC +/-10% 230 VAC +/-10% 400 VAC +/-10% 230 VAC +/-10%
Maximum input current 32 A 32 A 32 A 32 A 64 A
Maximum input power 7.4 kW 22 kW 7.4 kW 22 kW 14.8 kW
Number of plugs 1 1 2 2 2
Simultaneous charging 1 1 1 1 2
sessions
Maximum output current 32 A 32 A 32 A 32 A 32 A
Outlet A
Maximum output power 7.4 kW 22 kW 7.4 kW 22 kW 7.4 kW
AC output voltage 230 VAC (1P + N + PE) 400 VAC (3P+N+PE) 230 VAC (1P + N + PE) 400 VAC (3P+N+PE) 230 VAC (1P + N + PE)
Maximum output current - - 3.6 kW 3.6 kW 7.4 kW
Outlet B
Maximum output power - - 16 A 16 A 32 A
AC output voltage - - 230 VAC (1P + N + PE) 230 VAC (1P + N + PE) 230 VAC (1P + N + PE)
Socket Type 1 x Type 2 Socket 1 x Type 2 Socket 1 x Type 2 Socket 1 x Type 2 Socket 2 x Type 2 Socket
CEE/7 CEE/7
A A A B A B A B
www.circontrol.com 15Wallbox Smart
A suitable solution for improving user and operator experience
Application
Designed to be installed in both public access environments (urban
spaces, shopping centres, car parks, airports...) and private areas
(homes, communal blocks, company fleets...) where its intelligence
and communications capabilities offer a range of possibilities that
improve the user and/or operator experience.
Concept Design
Nowadays, the concept of an intelligent car park combined with
sophisticated users demands intelligent EV chargers with the
possibility of having connection to a cloud-based software or backend
system.
Installing a Smart Wallbox network in a car park allows for intelligent
energy management of several charging stations simultaneously when
there is not enough power available for all of them.
Product highlights
For Charge Point Operators / Owners For Charge Point Users
• The Integrated Load Management allows • Clear charging instructions and operating
for a lower TCO (Total Cost of Ownership) by status are shown using a backlit display,
charging two EVs simultaneously even when increasing user satisfaction, especially useful
the charger is not supplied with its maximum when the charger has been previously reserved
output power. by another user.
• In terms of the charger’s housing, ABS plastic • The Wallbox Smart series offers a flexible
has been selected. Its robust structural design authentication, meaning that the user can
provides protection against both mechanical authenticate either before or after connecting
stress and severe environmental conditions, the cable to the EV. Additionally, the
increasing the charger’s lifespan and meaning authentication process can also be disabled for
it does not need to replaced after just a few a Plug ‘n’ Charge mode.
years.
• In terms of communication, either through the
Ethernet port (by default) or 3G/GPRS modem
(optional), the charger can be connected to
a back-office system (by means of OCPP),
obtaining benefits such as user management,
billing, remote error diagnostics, etc.
• Ready for Dynamic Load Management
network integration. The Wallbox Smart series
can be integrated with Circontrol’s SCADA
software, making simultaneous EV charging
easier, faster and cheaper.
16 www.circontrol.comWallbox Smart Series
General Specifications
Network connection 10/100BaseTX (TCP-IP) RFID Reader ISO / IEC14443A / B
MIFARE Classic/DESFire EV1
Interface protocol OCPP 1.5 or OCPP 1.6J ISO 18092 / ECMA-340
Enclosure rating IP54 / IK10 NFC 13.56MHz
Enclosure material ABS Meter Class 1 - EN50470-3
Operating temperature -5°C to 45ºC Type 2 socket protection Locking system
Ambient temperature storage -40°C to +60Cº Compatible with DLM
Operating humidity 5% to 95% Non-condensing Optional devices
Light beacon RGB colour indicator MID Meter MID Class 1 - EN50470-3
Display Multi-language LCD Low temperature kit -30ºC to +45°C
Power limit control Mode 3 PWM control according to Cable support Optional (included at Wallbox with
ISO/IEC 61851-1 tethered cable)
Dimensions (D x W x H) Single: 125x225x320 mm Pedestal Single: for single-plug Wallbox
Dual: 125x442x350 mm Dual: for dual-plugs Wallbox
Weight Single: 4 kg Type 2 socket protection Shutter
Dual: 6 kg
Wireless Communication 4G / 3G / GPRS / GSM
Model Specifications
Model WBC-SMART WBC32-SMART WBMC-SMART
AC power supply 1P + N + PE 1P + N + PE 1P + N + PE
AC Voltage 230 VAC +/-10% 230 VAC +/-10% 230 VAC +/-10%
Maximum input current 16 A 32 A 32 A
Maximum input power 3.7 kW 7.4 kW 7.4 kW
Number of plugs 1 1 1
Maximum output power per outlet 3.7 kW 7.4 kW 7.4 kW
Maximum output current per outlet 16 A 32 A 32 A
AC output voltage 230 VAC (1P + N + PE) 230 VAC (1P + N + PE) 230 VAC (1P + N + PE)
Connection 1 x Type 1 Cable (5m) 1 x Type 1 Cable (5m) 1 x Type 2 Cable (5m)
Model WBMC-SMART-TRI WBM-SMART WBM-SMART-TRI
AC power supply 3P + N + PE 1P + N + PE 3P + N + PE
AC Voltage 400 VAC +/-10% 230 VAC +/-10% 400 VAC +/-10%
Maximum input current 32 A 32 A 32 A
Maximum input power 22 kW 7.4 kW 22 kW
Number of plugs 1 1 1
Maximum output power per outlet 22 kW 7.4 kW 22 kW
Maximum output current per outlet 32 A 32 A 32 A
AC output voltage 400 VAC (3P+N+PE) 230 VAC (1P + N + PE) 400 VAC (3P + N + PE)
Connection 1 x Type 2 Cable (5m) 1 x Type 2 Socket 1 x Type 2 Socket
(lock system) (lock system)
Model WB2M-SMART WB2M-SMART-TRI WB-MIX-SMART
AC power supply 1P + N + PE 3P + N + PE 1P + N + PE
AC Voltage 230 VAC +/-10% 400 VAC +/-10% 230VAC +/-10%
Maximum input current 64 A 64 A 48 A
Maximum input power 14.7 kW 44 kW 11 kW
Number of plugs 2 2 2
Maximum output power 7.4 kW 22 kW 7.4 kW
Outlet B Outlet A
Maximum output current 32 A 32 A 32 A
Maximum output power 7.4 kW 22 kW 3.7 kW
Maximum output current 32 A 32 A 16 A
AC output voltage 230 VAC (1P + N + PE) 400 VAC (3P + N + PE) 230 VAC (1P + N + PE)
Connection 2 x Type 2 Socket 2 x Type 2 Socket 1 x Type 2 Socket
(lock system) (lock system) (lock system) + 1 x CEE/7
www.circontrol.com 17Wallbox eVolve Smart
The perfect combination of robustness, design and communications
Application
Designed to be installed in both public access environments (urban
spaces, shopping centres, car parks, airports, petrol stations...) and
private areas (companies, community car park sites...) where its
intelligent capabilities offer a range of possibilities which improve the
user and/or operator experience.
Concept Design
Nowadays, the concept of smart cities demands an innovative design
for urban equipment, especially for EVSE (EV Supply Equipment) due
to its innovative nature. With its stylised shape and modern lines, the
eVolve series meets this demand.
In addition, not only has the exterior design been taken into account,
but also the daily conditions (operational and environmental) that EVSE
has to withstand.
Product highlights
For Charge Point Operators / Owners For Charge Point Users
• The Integrated Load Management allows • Clear charging instructions and operating
for a lower TCO (Total Cost of Ownership) by status are shown using a backlit display,
charging two EVs simultaneously. increasing user satisfaction, especially useful
when the charger has been previously reserved
• The door at the front with key access provides by another user.
easy access to the interior of the charger which
results in a lower OPEX (operating expense) • eVolve series offers a flexible authentication,
due to a quicker installation and service meaning that the user can authenticate either
(preventive/corrective). Moreover, it allows the before or after the cable to the EV. Additionally,
charger to be installed next to a wall, optimising the authentication process can also be
the available space. disabled for a Plug ‘n’ Charge mode.
• In terms of the charger’s housing, aluminium • Accessibility for disabled users has also
and ABS plastic have been combined in been considered, complying with international
a robust structural design that provides standards regarding the height of connectors/
protection against both mechanical stress and displays, facilitating their use.
severe environmental conditions, increasing the
charger’s lifespan, meaning it will not need to • The eVolve series includes the necessary
be replaces after just a few years. electrical protections (optional) not only to
minimise the human safety risk of electrical
• In terms of communication, either through shocks but also to ensure the maximum
the Ethernet port (by default) or 4G/3G/ uptime thanks to independent protections per
GPRS modem (optional), the charger can be connector.
connected to a back-office system (by means
of OCPP), obtaining benefits such as user
management, billing, remote error diagnostics,
etc.
• To comply with the most demanding
requirements regarding billing, the eVolve
series includes MID certified metres.
• Available in two sizes, a small one with no
protections and a large one with protections.
18 www.circontrol.comWallbox eVolve Smart Series
General Specifications
Network connection 10/100BaseTX (TCP-IP) Meter MID Class 1 - EN50470-3
Interface protocol OCPP 1.5 or OCPP 1.6J Power output management Integrated Load Management
Enclosure rating IP54 / IK10 Type 2 socket protection Locking System
Enclosure material Aluminium & ABS Compatible with DLM
Enclosure door lock Key lock
Optional devices
Enclosure access Frontal door
Operating temperature Low temperature kit -30 ºC to +45 ºC
-5 °C to + 45 ºC
Overcurrent protection* MCB (curve C)
Ambient temperature storage -40 ºC to + 60 ºC
Electrical protection* RCD Type A (30mA)
Operating humidity 5% to 95% Non-condensing
RCD Type A (30mA) + 6mA DC
Light beacon RGB colour indicator RCD Type B (30mA)
Display Multi-language LCD Autorecovery function optional**
Type 2 socket protection Shutter
Power limit control Mode 3 PWM control according to
ISO/IEC 61851-1 Wireless Communication 4G / 3G / GPRS / GSM
Dimensions (D x W x H) Small: 222x382x628 mm Tethered Cable (spring)* Type 1 + Type 1
(Model S & T without protections) (Cable length: 4 m) Type 2 + Type 2
Large: 222x382x928 mm Type 2 + Type 2 Socket
Weight Small: 25 kg RFID Extension Legic Advant / Legic Prime
Large: 30 kg ISO 15693 / ISO 18092, Sony FeliCa
RFID Reader ISO / IEC14443A / B Customisation Frontal Labelling
MIFARE Classic/DESFire EV1
Anti-vandal key
ISO 18092 / ECMA-340
NFC 13.56MHz *Not available in the TM4 model
**As per directive this function is not available for cable. It is also not
compatible with the “RCD Type A + 6mA DC” option.
Model Specifications
Model S One T One S T TM4
AC power supply 1P + N + PE 3P + N + PE 1P + N + PE 3P + N + PE 3P + N + PE
AC input voltage 230 VAC +/-10% 400 VAC +/-10% 230 VAC +/-10% 400 VAC +/-10% 400 VAC +/-10%
Maximum input current 32 A 32 A 64 A 64 A 64 A
Maximum input power 7.4 kW 22 kW 14.7 kW 44 kW 44 kW
Number of plugs 1 1 2 2 4
Maximum 32 A 32 A 32 A 32 A 32 A 16 A
output current
Outlet A
Maximum 7.4 kW 22 kW 7.4 kW 22 kW 22 kW 3.7 kW
output power
AC output 230 VAC 400 VAC 230 VAC 400 VAC 400 VAC 230 VAC
voltage (1P + N + PE) (3P + N + PE) (1P + N + PE) (3P + N + PE) (3P + N + PE) (1P + N + PE)
Maximum 32 A 32 A 32 A 16 A
output current
Outlet B
Maximum 7.4 kW 22 kW 22 kW 3.7 kW
output power
AC output 230 VAC 400 VAC 400 VAC 230 VAC
voltage (1P + N + PE) (3P + N + PE) (3P + N + PE) (1P + N + PE)
Small No No No No Not Available
Protections
Large Yes Yes Yes Yes No
Connection Type 2 Socket Type 2 Socket 2x Type 2 Socket 2x Type 2 Socket 2x Type 2 Socket 2x CEE/7
(lock system) (lock system) (lock system) (lock system) (lock system)
A A A B A B A B
www.circontrol.com 19Post eVolve Smart
The most suitable charger for urban environments
Application
Designed to be installed in both public access environments (urban spaces,
shopping centres, car parks, airports, petrol stations...) and private areas
(companies, community car park sites...) where its intelligent capabilities offer
a range of possibilities which improve the user and/or operator experience.
Concept Design
Nowadays, the concept of smart cities demands an innovative design for
its urban equipment, especially for EVSE (EV Supply Equipment) due to its
innovative nature. With its stylised shape and modern lines, the eVolve series
meets this demand.
In addition, not only has the exterior design been taken into account, but
also the daily conditions (operational and environmental) that EVSE has to
withstand.
Product highlights
For Charge Point Operators / Owners For Charge Point Users
• The Integrated Load Management allows • Clear charging instructions and operating
for a lower TCO (Total Cost of Ownership) by status are shown using a backlit display,
charging two EVs simultaneously even when increasing user satisfaction, especially useful
the charger is not supplied with its maximum when the charger has been previously reserved
output power. by another user.
• The door at the front with key access provides • eVolve series offers a flexible authentication,
an access to the interior of the charger which meaning that the user can authenticate either
results in a lower OPEX (operating expense) before or after the cable to the EV. Additionally,
due to a quicker installation and service the authentication process can also be
(preventive/corrective). Moreover, it allows the disabled for a Plug ‘n’ Charge mode.
charger to be installed next to a wall, optimising
the available space. • Accessibility for disabled users has also
been considered, complying with international
• In terms of the charger’s housing, aluminium standards regarding the height of connectors/
and ABS plastic have been combined in displays, facilitating their use.
a robust structural design that provides
protection against both mechanical stress and • The eVolve series includes the necessary
severe environmental conditions, increasing the electrical protections not only to minimise
charger’s lifespan, meaning it will not need to the human safety risk of electrical shock, but
be replaces after just a few years. also to ensure the maximum uptime thanks to
independent protections per connector.
• In terms of communication, either through
the Ethernet port (by default) or 4G/3G/
GPRS modem (optional), the charger can be
connected to a back-office system (by means
of OCPP), obtaining benefits such as user
management, billing, remote error diagnostics,
etc.
• To comply with the most demanding
requirements regarding billing, the eVolve
series includes MID certified metres.
20 www.circontrol.comPost eVolve Smart Series
General Specifications
Network connection 10/100BaseTX (TCP-IP) Overcurrent protection MCB (curve C)
Interface protocol OCPP 1.5 or OCPP 1.6J Safety protection RCD Type A (30mA)
Autorecovery function optional*
Enclosure rating IP54 / IK10
Type 2 socket protection Locking System
Enclosure material Aluminium & ABS
Compatible with DLM
Enclosure door lock Key lock
Optional devices
Enclosure access Frontal door
Low temperature kit -30 ºC to +45 ºC
Operating temperature -5 °C to +45 ºC
Safety protection RCD Type A (30mA) + 6mA DC
Ambient temperature storage -40 ºC to +60 ºC RCD Type B (30mA) with
Operating humidity 5% to 95% Non-condensing autorecovery function optional*
Light beacon RGB colour indicator Surge protection Four pole transient surge protector
IEC 61643-1 (class II)
Display Multi-language LCD
Type 2 charging socket Shutter
Power limit control Mode 3 PWM control according to
ISO/IEC 61851-1 Wireless Communication 4G / 3G / GPRS / GSM
Dimensions (D x W x H) 290x450x1550 mm Anti-vandal key
Weight 55 kg Anti-vandal door Not available for TM4
RFID Reader ISO / IEC14443A / B Tethered Cable (spring) Type 1 + Type 1
MIFARE Classic/DESFire EV1 (Cable length: 4 m) Type 2+ Type 2
ISO 18092 / ECMA-340 Type 2 + Type 2 Socket
NFC 13.56MHz
RFID Extension Legic Advant / Legic Prime
Meter MID Class 1 - EN50470-3 ISO 15693 / ISO 18092, Sony FeliCa
Power output management Integrated Load Management Customisation Frontal Labelling
*As per regulations this function is not available for cable. It is also not
Model Specifications compatible with the “RCD Type A + 6mA DC” option.
Model S One T One C63 One S T TM4
AC power supply 1P + N + PE 3P + N + PE 3P + N + PE 1P + N + PE 3P + N + PE 3P + N + PE
AC input voltage 230 VAC +/-10% 400 VAC +/-10% 400 VAC +/-10% 230 VAC +/-10% 400 VAC +/-10% 400 VAC +/-10%
Maximum input 32 A 32 A 63 A 64 A 64 A 64 A
current
Maximum input 7.4 kW 22 kW 43 kW 14.7 kW 44 kW 44 kW
power
Number of plugs 1 1 1 2 2 4*
Maximum 32 A 32 A 63 A 32 A 32 A 32 A 16 A
output current
Maximum 7.4 kW 22 kW 43 kW 7.4 kW 22 kW 22 kW 3.7 kW
Outlet A
output power
AC output 230 VAC 400 VAC 400 VAC 230 VAC 400 VAC 400 VAC 230 VAC
voltage (1P + N + PE) (3P + N + PE) (3P + N + PE) (1P + N + PE) (3P + N + PE) (3P + N + PE) (1P + N + PE)
Maximum 32 A 32 A 32 A 16 A
output current
Maximum 7.4 kW 22 kW 22 kW 3.7 kW
Outlet B
output power
AC output 230 VAC 400 VAC 400 VAC 230 VAC
voltage (1P + N + PE) (3P + N + PE) (3P + N + PE) (1P + N + PE)
Connection Type 2 Socket Type 2 Socket Type 2 Cable 2x Type 2 Socket 2x Type 2 Socket 2x Type 2 2x CEE/7
(lock system) (lock system) (4m) (lock system) (lock system) Socket (lock
system)
A A A A B A B A B
* Exclusive use type 2 or
Customisation Examples CEE/7 per outlet
The eVolve series features a
broad frontal panel that can be
easily customised.
www.circontrol.com 21Master - Slave
The most cost-effective multiple charging solution
Application
Designed to minimise the initial investment (CAPEX) and the operating expenses (OPEX)
when several chargers are required, this solution is a combination of a Master charger and
a set of Slaves controlled by this Master. The whole system works as if all the chargers had
smart capabilities.
Suitable for private installations such as company fleets or communities with a single
administrator, and also for public access environment such as shopping centers, car parks,
airports and others.
Concept Design
It has the same exterior design concept as the acclaimed eVolve series, and in addition
to featuring modern lines and robust housing, harsh weather conditions and user-friendly
operation have also been considered.
Slave
Slave
*Raption 50, Raption 150
and Wallbox eVolve are also
available for Master.
Master*
22 www.circontrol.comProduct highlights
• The Master charger is capable of balancing • The door at the front with key access provides
the available power based on the number an access to the interior of the charger which
of charge points in use, thus the total power results in a lower OPEX (operating expense)
required to provide the total load becomes due to quicker installation and service
substantially reduced. This makes it possible to (preventive/corrective). Moreover, it allows the
reduce costs in the electrical installation setup charger to be installed next to a wall optimising
and a cost saving on the contracted energy. the available space.
• Also, by centralising the smart capabilities • Its 8’’ daylight readable touchscreen not
into the Master, the hardware of the Slaves is only provides clear charging instructions (e.g.
reduced, so combining Master-Slave is the incorrect EV shift position to start the charge)
best choice to minimise the hardware cost. and operating status (e.g. reserved charge
point) but also allows the user to select from
• A single modem in the Master unit can be several languages.
used for remote connection and back-office
system integration (by means of OCPP 1.5 or • To comply with the most demanding
1.6J), so communication fees are also reduced requirements regarding billing, the eVolve
avoiding extra OPEX cost. series includes MID certified metres.
• The Master can operate up to 8 Slaves • The eVolve series include the necessary
(max. 18 charging points including the Master) electrical protections not only to minimise
managing the load and user authentication. the human safety risk of electric shocks, but
also to ensure the maximum uptime thanks to
• For car parks without OCPP backend system, independent protections per connector.
standalone configuration offers a load
balancing feature and user control through • Integrated contactless payment system:
RFID. Offers an easy, intuitive and contactless card
payment experience. (Available only for Post)
Master-Slave Post
Master-Slave Wallbox
www.circontrol.com 23Master - Slave Post
General Specifications
Enclosure rating IP54 / IK10 Optional devices
Enclosure material Aluminium & ABS Low Temperature Kit -30 °C to +45 ºC
Enclosure door lock Key lock Safety Protection RCD Type A + 6mA DC
Enclosure access Frontal door RCD Type B (30mA)
Operating temperature -5 °C to + 45 ºC Surge Protection Four pole transient surge protector
IEC 61643-1 (class II)
Ambient temperature storage -20 ºC to + 60 ºC
Type 2 socket protection Shutter
Operating humidity 5% to 95% Non-condensing
Wireless communication 4G LTE/WiFi Hotspot/GPRS/GSM/
Meter MID Class 1 - EN50470-3 (only in Master) 3G LATAM
Light beacon RGB colour indicator Anti-vandal key
Power limit control Mode 3 PWM control according to Tethered cable (spring) Type 1 + Type 1
ISO/IEC 61851-1 (cable length: 4m)
Type 2 + Type 2
Dimensions 450 x 290 x 1550 mm
Network hub Switch TCP ethernet 8 ports
Weight 55 kg (only available in Master)
Switch TCP ethernet 12 ports
Power Output Management Integrated Load Management
RFID Extension Legic Advant / Legic Prime
Overcurrent protection MCB (Curve C) ISO 15693 / ISO 18092, Sony FeliCa
Safety protection RCD Type A (30mA) Customisation Frontal Labelling
Type 2 socket protection Locking System
Master
Network connection 10/100TX (TCP-IP)
Interface protocol OCPP 1.5 or OCPP 1.6J
Display HMI 8” anti-vandal touchscreen
RFID Reader ISO/IEC 14443 A/B
MIFARE Classic/DESFire EV1
ISO 18092 ECMA-340
NFC 16.53MHz
Slave
Master Communication Ethernet UTP
Model Specifications
Models Master Master Master or Slave Master or Slave Master or Slave
S One T One C63 One S T
AC power supply 1P + N + PE 3P + N + PE 3P + N + PE 1P + N + PE 3P + N + PE
AC input voltage 230 VAC +/-10% 400 VAC +/-10% 400 VAC +/-10% 230 VAC +/-10% 400 VAC +/-10%
Maximum input current 32 A 32 A 63 A 64 A 64 A
Maximum input power 7.4 kW 22 kW 44 kW 14.8 kW 44 kW
Number of plugs 1 1 1 2 2
Maximum output current 32 A 32 A 63 A 32 A 32 A
Outlet A
Maximum output power 7.4 kW 22 kW 43 kW 7.4 kW 22 kW
AC output voltage 230 VAC 400 VAC 400 VAC 230 VAC 400 VAC
(1P + N + PE) (3P + N + PE) (3P + N + PE) (1P + N + PE) (3P + N + PE)
Maximum output current 32 A 32 A
Outlet B
Maximum output power 7.4 kW 22 kW
AC output voltage 230 VAC 400 VAC
(1P + N + PE) (3P + N + PE)
Master 1x Type 2 Socket 1x Type 2 Socket 1 x Type 2 Cable 2x Type 2 Socket 2x Type 2 Socket
Connection
(lock system) (lock system) (4m) (lock system) (lock system)
Slave Not available Not available 1 x Type 2 Cable 2x Type 2 Socket 2x Type 2 Socket
(4m) (lock system) (lock system)
24 www.circontrol.comMaster - Slave Wallbox
General Specifications
Enclosure rating IP54 / IK10 Optional devices
Enclosure material Aluminium & ABS Low Temperature Kit -30 °C to +45 ºC
Enclosure door lock Key lock Overcurrent protection MCB (curve C)
Enclosure access Frontal door Electrical protection RCD Type A (30mA)
RCD Type A (30mA) + 6mA DC
Operating temperature -5 °C to + 45 ºC
RCD Type B (30mA)
Ambient temperature storage -20 ºC to + 60 ºC
Type 2 charging socket Shutter
Operating humidity 5% to 95% Non-condensing
Wireless communication 4G LTE/WiFi Hotspot/GPRS/GSM/
Meter MID Class 1 - EN50470-3 (only in Master) 3G LATAM
Light beacon RGB colour indicator Anti-vandal key
Power limit control Mode 3 PWM control according Tethered cable (spring) Type 1 + Type 1
to ISO/IEC 61851-1 Cable length: 4m
Type 2 + Type 2
(only available in Slave)
Dimensions Small: 222 x 382 x 628 mm
(only available on Master Zero Network hub Switch TCP ethernet 8 ports
and on Slave S) (only available in Master)
Switch TCP ethernet 12 ports
Large: 222 x 382 x 928 mm
RFID Extension Legic Advant / Legic Prime
Weight Small: 25 kg
ISO 15693 / ISO 18092, Sony FeliCa
Large: 30 Kg
Customisation Frontal Labelling
Power Output Management Integrated Load Management
Type 2 socket protection Locking System
Master
Network connection 10/100TX (TCP-IP)
Interface protocol OCPP 1.5 or OCPP 1.6J
Display HMI 8” anti-vandal touchscreen
RFID Reader ISO/IEC 14443 A/B
MIFARE Classic/DESFire EV1
ISO 18092 ECMA-340
NFC 16.53MHz
Slave
Master Communication Ethernet UTP
Model Specifications
Models Master Master Master Master or Slave Master or Slave
Zero S One T One S T
AC power supply 1P + N + PE 1P + N + PE 3P + N + PE 1P + N + PE 3P + N + PE
AC input voltage 230 VAC +/-10% 230 VAC +/-10% 400 VAC +/-10% 230 VAC +/-10% 400 VAC +/-10%
Maximum input current 0.15 mA 32 A 32 A 64 A 64 A
Maximum input power 35 W 7.4 kW 22 kW 14.8 kW 44 kW
Number of plugs 0 1 1 2 2
Maximum output current 32 A 32 A 32 A 32 A
Outlet A
Maximum output power 7.4 kW 22 kW 7.4 kW 22 kW
AC output voltage 230 VAC 400 VAC 230 VAC 400 VAC
(1P + N + PE) (3P + N + PE) (1P + N + PE) (3P + N + PE)
Maximum output current 32 A 32 A
Outlet B
Maximum output power 7.4 kW 22 kW
AC output voltage 230 VAC 400 VAC
(1P + N + PE) (3P + N + PE)
Master Not available 1x Type 2 Socket 1x Type 2 Socket Check availability Check availability
Connection
(lock system) (lock system)
Slave Not available Not available Not available 2x Type 2 Socket 2x Type 2 Socket
(lock system) (lock system)
www.circontrol.com 25Raption 50
The perfect combination of power, design and reliability
Application
Designed to be installed in both public access environments (urban
spaces, shopping centres, airports, road-side rest areas...) and private
areas (companies with EV fleets, taxi ranks...) where vehicles need to
be ready to continue their journey in less than half an hour.
Concept Design
Designed to address the main problem identified by charge point
owners/ operators when fast charging (low uptime), the Raption 50
series is bases on state-of-the-art modular power technology.
Another key attribute considered was its exterior design. Sophisticated,
slim and robust are just some adjectives that can be used to describe
this series and features that make it ideal for any type of site (from the
most stylish urban area to industrial sites).
Product highlights
For Charge Point Operators / Owners For Charge Point Users
• Its modular power technology ensures a very high • Its 8” anti-vandal daylight readable
uptime (reducing the non-operation expenditure), colour touchscreen not only provides
because in the event of a power module failure, the clear charging instructions (e.g. incorrect
rest of the modules continue charging. EV shift position to start the charge) and
operating status (e.g. reserved charge
• Lower energy consumption (and therefore OPEX) is point), but it also allows the user to select
achieved due to a sustained high efficiency level from several languages.
resulting from disconnecting power modules when
lower charging power is requested by the EV. • User satisfaction is also increased due
to its built-in courtesy light which both
• The modular architecture allows power scalability facilitates locating the charge point in dark
from 25 kW to 50 kW to meet present and future EV areas and reading the messages included
battery demands. on operator instruction labels.
• It offers a unique connector care concept by means • Accessibility for disabled users has
of the connector locking feature (optional) and also been considered, complying with
floating cable design, which reduces the risk of the international standards regarding the
cable breaking. height of connectors/ displays, facilitating
their use.
• The double door at the front with key access
provides an easy access to the charger for quicker • Integrated contactless payment system:
installation and service. Moreover, it allows the Offers an easy, intuitive and contactless
charger to be installed next to a wall, optimising the card payment experience.
available space.
• Possible to configure as a Master for the Master-
Slave solution (p. 22).
• 480 V model available for Mexico and other
countries in Latin America.
26 www.circontrol.comRaption 50 Series
General Specifications
AC Power Supply 3P + N + PE DC cable length CCS 3 metres
AC Voltage 400V AC +/- 10% DC cable length CHAdeMO 3 metres
Power Factor >0.98 AC cable length 3 metres
Efficiency 95% at nominal output power Lights for status indication RGB colour indicator
Frequency 50 / 60 Hz Dimensions (D x W x H) 355x940x1800 mm (without cable engaged)
Electrical input protection Main breaker disconnection Weight 235 kg
Overcurrent protection MCB Cooling system Air cooling fans
Safety protection RCD Type B Operational noise level < 55 dBA
Network connection Ethernet 10/100BaseTX AC Meter Compliant with the EN 50470-1
and EN 50470-3 (MID European
Interface protocol OCPP 1.5 or OCPP 1.6J
standards) or IEC 62052-11
Compliance CE / Combo-2
Wireless Communication EU 4G LTE/WiFi Hotspot/GPRS/GSM
(DIN 70121; ISO15118)
IEC 61851-1; IEC 61851-23; Optional devices
IEC 61851-21-2
Wireless Communication LATAM/APAC/4G LTE/GPRS/GSM
CHAdeMO compatible
Surge protection Four pole transient surge protector
Enclosure rating IP54 / IK10 IEC 61643-1 (class II)
Enclosure material Stainless steel Cable Length 5.5 metres (all cables)
Operating temperature -30 ºC to +50 ºC Anti-vandal connector CHAdeMO, CCS
protection (mechanical connector locking)
Ambient temperature sto- -40 ºC to +60 ºC
rage Type 2 charging socket Shutter
Operating humidity 5% to 95% Non-condensing 25 kW DC version Power output DC of 25 kW
Socket protection Locking System Network hub Switch TCP ethernet 8 ports
RFID system ISO / IEC14443-1/2/3 Switch TCP ethernet 12 ports
MIFARE Classic
RFID Extension Legic Advant / Legic Prime
Display HMI 8” anti-vandal colour touchscreen ISO 15693/ISO 18092. Sony FeliCa
Power limit control DC & AC by software Contactless payment* Integrated credit card payment terminal
* Ask for availability.
Model Specifications
Models CCS CCS T2C32 CCS T2S32
Maximum AC input current 76 A (38 A*) 108 A (70 A*) 108 A (70 A*)
Required power supply capacity 53 kVA (26 kVA*) 75 kVA (48 kVA*) 75 kVA (48 kVA*)
Maximum output power 50 kW (25 kW*) DC: 50 kW (25 kW*) DC: 50 kW (25 kW*)
(@400 VDC) (@400 VDC) (@400 VDC)
AC: 22 kW AC: 22 kW
Output voltage range DC: 50 - 500 V DC: 50 - 500 V DC: 50 - 500 V
AC: 400 V AC: 400 V
Maximum output current DC: 125 A (63 A*) DC: 125A (63 A*) DC: 125A (63 A*)
AC: 32 A AC: 32 A
Connection CCS 2 CCS 2 CCS 2
Type 2 Tethered cable Type 2 Socket (Lock system)
Models CCS CHA CCS CHA T2S32 CCS CHA T2C32 CCS CHA T2C63
Maximum AC input current 76 A (38 A*) 108 A (70 A*) 108 A (70 A*) 138 A (101 A*)
Required power supply capacity 53 kVA (26 kVA*) 75 kVA (48 kVA*) 75 kVA (48 kVA*) 96 kVA (70 kVA*)
50 kW (25 kW*) DC: 50 kW (25 kW*) DC: 50 kW (25 kW*) DC: 50 kW (25 kW*)
Maximum output power (@400 VDC) (@400 VDC) (@400 VDC) (@400 VDC)
AC: 22 kW AC: 22 kW AC: 43 kW
Output voltage range DC: 50 - 500 V DC: 50 - 500 V DC: 50 - 500 V DC: 50 - 500 V
AC: 400 V AC: 400 V AC: 400 V
Maximum output current DC: 125 A (63 A*) DC: 125 A (63 A*) DC: 125 A (63 A*) DC: 125 A (63 A*)
AC: 32 A AC: 32 A AC: 63 A
Connection CCS 2 - JEVS G105 CCS 2 - JEVS G105 CCS 2 - JEVS G105 CCS 2 - JEVS G105
Type 2 Socket (Lock system) Type 2 Tethered cable Type 2 Tethered cable
* 25 kW DC version
www.circontrol.com 27Raption 100
Ideal to satisfy the rapid charging needs of new EVs
Application
Designed to be installed in both public access spaces (urban and
inter-urban spaces, service areas...) and private ones (EV fleets,
taxi ranks...) where EVs need to minimise their charge times as
much as possible.
Concept Design
Designed to satisfy the rapid charging needs of new EV models
with larger batteries capable of offering greater autonomy, but
without sacrificing the design nor most of the features that defined
its predecessor, the Raption 50: modular power technology, elegant
yet robust design, user-friendliness and reliability.
Product highlights
For Charge Point Operators / Owners For Charge Point Users
• Greater charging power: Its 25 kW charging • 8-inch colour touch screen: The user
modules allow it to offer up to 100 kW, doubling the receives clear charging instructions as well
charging power of the Raption 50. as the connector status on the touch screen.
It also allows the user to select from several
• Scalability and flexibility: Its modular architecture languages.
allows for power scalability of 50 kW or 100 kW
depending on the contracted power, and for this • Built-in courtesy light: Facilitates locating
power to be adapted to the growing battery sizes the charge point in dark areas and reading
of new EV models. Furthermore, the modular the operator instructions.
power guarantees very high uptime, as if one of
the modules fails, the others will keep working. • Accessibility: The height of the connectors
Likewise, when an EV needs less charging and the screen have been adapted to
power, modules can be disconnected and energy comply with standards in order to improve
consumption reduced thanks to its sustained accessibility for disabled people.
efficiency.
• Integrated contactless payment system:
• Compact and 100% customisable design: It Offers an easy, intuitive and contactless card
maintains the elegant, high-quality and robust payment experience.
enclosure of the Raption 50, one of the most highly
rated charge points on the market.
• Reduced OPEX: It maintains features such as the
connector locking and the floating cable design,
which result in increased durability. Furthermore,
the door at the front with key access reduces
repair and maintenance times and allows the
charger to be installed next to a wall, optimising
the available space.
• Configurable as a Master: Can be configured as
a Master for multi-point solutions.
28 www.circontrol.comRaption 100 Series
General Specifications
AC Power Supply 3P + N + PE DC cable length CHAdeMO 3 metres
AC Voltage 400V AC +/- 10% AC cable length 3 metres
Power Factor >0.98 Lights for status indication RGB colour indicator
Efficiency 95% at nominal output power Dimensions (D x W x H) 355x940x1800 mm (without cable engaged)
Frequency 50 / 60 Hz Weight 255 kg
Electrical input protection Main breaker disconnection Cooling system Air cooling fans
Overcurrent protection MCB Operational noise level < 55 dBA
Safety protection RCD Type B AC Meter Compliant with the EN 50470-1
and EN 50470-3 (MID European
Network connection Ethernet 10/100BaseTX
standards) or IEC 62052-11
Interface protocol OCPP 1.5 or OCPP 1.6J
Wireless Communication EU 4G LTE/WiFi Hotspot/GPRS/GSM
Compliance CE / Combo-2
Optional devices
(DIN 70121; ISO15118)
IEC 61851-1; IEC 61851-23; Wireless Communication LATAM/APAC/4G LTE/GPRS/GSM
IEC 61851-21-2 Surge protection Four pole transient surge protector
CHAdeMO compatible IEC 61643-1 (class II)
Enclosure rating IP54 / IK10 Cable Length 5.5 metres (all cables)
Enclosure material Stainless steel CHAdeMo cable upgrade 200 A (100 kW)*
Operating temperature -30 ºC to +50 ºC Anti-vandal connector CHAdeMO, CCS
protection (mechanical connector locking)
Ambient temperature sto- -40 ºC to +60 ºC
rage Type 2 charging socket Shutter
Operating humidity 5% to 95% Non-condensing 50 kW DC version Power output DC of 50 kW
Socket protection Locking System Network hub Switch TCP ethernet 8 ports
RFID system ISO / IEC14443-1/2/3 Switch TCP ethernet 12 ports
MIFARE Classic RFID Extension Legic Advant / Legic Prime
Display HMI 8” anti-vandal colour touchscreen ISO 15693/ISO 18092. Sony FeliCa
Power limit control DC & AC by software Contactless payment** Integrated credit card payment terminal
DC cable length CCS 3 metres * HW ready SW available within 2021.
** Ask for availability.
Model Specifications
Models CCS CCS T2C32 CCS T2S32
Maximum AC input current 160 A 192 A 192 A
Required power supply capacity 110 kVA 132 kVA 132 kVA
Maximum output power 100 kW DC: 100 kW DC: 100 kW
AC: 22 kW AC: 22 kW
Output voltage range DC: 150 - 920 V DC: 150 - 920 V DC: 150 - 920 V
AC: 400 V AC: 400 V
Maximum output current DC: 250 A DC: 250 A DC: 250 A
AC: 32 A AC: 32 A
Connection CCS 2 CCS 2 CCS 2
Type 2 Tethered cable Type 2 Socket (Lock system)
Models CCS CHA CCS CHA T2C32 CCS CHA T2S32
Maximum AC input current 160 A 192 A 192 A
Required power supply capacity 110 kVA 132 kVA 132 kVA
CCS 100 kW DC: CSS 100 kW / CHA 50 kW DC: CSS 100 kW / CHA 50 kW
Maximum output power CHA 50 kW AC: 22 kW AC: 22 kW
Output voltage range DC: 150 - 920 V DC: 150 - 920 V DC: 150 - 920 V
AC: 400 V AC: 400 V
Maximum output current DC: CSS 250 A / CHA 125 A DC: CSS 250 A / CHA 125 A DC: CSS 250 A / CHA 125 A
AC: 32 A AC: 32 A
Connection CCS 2 - JEVS G105 CCS 2 - JEVS G105 CCS 2 - JEVS G105
Type 2 Tethered cable Type 2 Socket (Lock system)
29 www.circontrol.comRaption 150
The best solution for eBuses and petrol stations
Application
Designed to be installed in road-side rest areas and petrol
stations where vehicles with large batteries require high
charging power to be ready to continue their journey in less
than half hour and minimise charging time.
Concept Design
Designed to address the main problems identified by charge
point owners/ operators when fast charging (low uptime),
the Raption 150 series is based on state-of-the-art modular
power technology.
Another key attribute considered was the exterior design.
Sophisticated, slim and robust are just some adjectives that
can be used to describe this series features that make it
ideal for any type of site (from the most stylish urban areas to
industrial ones). The Raption 150’s modular architecture allows
power scalability from 100 kW to 150 kW.
Product highlights
For Charge Point Operators / Owners For Charge Point Users
• Simultaneous DC charge able to charge 2 EVs • Its 8” anti-vandal colour touchscreen
at the same time by splitting the available power daylight readable not only provides clear
(e.g. 75 kW + 75 kW). charging instructions (e.g. incorrect EV
position to start the charge) and operating
• Its modular power technology ensures status (e.g. reserved charge point), but
high uptimes (reducing the non-operation also allows the user to select from several
expenditure), because in the event of a power languages.
module failure, the rest of the modules continue
charging. • User satisfaction is also increased due to its
built-in courtesy light which both facilitates
• Lower energy consumption (and therefore OPEX) locating the charge point in dark areas and
is achieved due to a sustained high efficiency reading the messages included on operating
level resulting from disconnecting power modules instruction labels.
when lower charging power is requested by the
EV. • Accessibility for disabled users has
also been considered, complying with
• The modular architecture allows power international standards regarding the height
scalability, so two models are possible; of connectors/ displays, facilitating their use.
Raption 150 Lite (max output 100 kW) and
Raption 150 (max output 150 kW). • The Raption series can be optionally
equipped with an integrated payment
• It offers a unique connector care concept by terminal to facilitate payments by credit
means of the connector locking feature (optional) card and enhance the user experience. Our
and floating cable design, which reduces the payment terminal allows payment without a
risk of the cable breaking (i.e., lower OPEX and membership model and can operate with or
higher uptime). without a back-office platform.
• The door at the front with key access provides
access to the interior of the charger which results
in a lower OPEX due to quicker installation and
servicing (preventive/corrective). Moreover, it
allows the charger to be installed next to a wall,
optimising the available space.
• Possible to configure as a Master for the Master-
Slave solution.
30 www.circontrol.comRaption 150 Series
General Specifications
Compliance CE / Combo-2 Power Unit
(DIN 70121; ISO15118)
AC power supply 3P + N + PE
IEC 61851-1; IEC 61851-23;
IEC 61851-21-2 AC Voltage 400V AC +/- 10%
CHAdeMO compatible Maximum AC input current 237A / 160A*
Enclosure rating IP54 / IK10 Required power supply 163kVA / 110kVA*
capacity
Enclosure material Stainless steel
Power Factor (pu) >0.98
Operating temperature -10 ºC to + 50 ºC
Efficiency (pu) 94% at nominal output power
Ambient temperature storage - 20 ºC to + 60 ºC
Frequency (pu) 50 / 60 Hz
Operating humidity 5% to 95% Non-condensing Cooling system Forced air
Dispenser Operational noise level < 55 dBA
Network connection Ethernet 10/100BaseTX Electrical input protection Main circuit disconnection
Interface protocol OCPP 1.5 or OCPP 1.6J Overcurrent protection MCB
RFID system ISO / IEC14443-1/2/3 Safety protection (pu) RCD Type B
MIFARE Classic Dimensions (D x W x H) 800x1000x2100 mm
Display HMI 8" anti-vandal colour touchscreen Weight 420 kg
Power limit control DC by software Optional devices
DC cable length CCS 3.4 metres Wireless Communication LATAM/APAC/4G LTE /GPRS/GSM
Surge protection Four pole transient surge protector
DC cable length CHAdeMO 3.4 metres
IEC 61643-1 (class II)
Lights for status indication RGB colours indicator
Cable Length 5.3 metres (all cables)
Dimensions (D x W x H) 378x420x2067mm Anti-vandal connector CHAdeMO, CCS
Weight 115 kg protection (mechanical connector locking)
Operational noise level Not perceptible RFID Extension Legic Advant / Legic Prime
ISO 15693/ISO 18092. Sony FeliCa
AC Meter Compliant with the EN 50470-1
and EN 50470-3 (MID European Low Temperature Kit -30ºC to +50ºC
standards) or IEC 62052-11 Contactless payment** Integrated credit card payment terminal
Wireless Communication EU 4G LTE /WiFi Hotspot/GPRS/GSM *Raption 150 Lite Models
**Ask for availability.
Model Specifications
Raption 150 Models CCS250 (1) CCS200 CHA125 CCS250 CHA200 CCS250 CCS250 (1)
Maximum output power CCS: 150 kW (2)
CCS: 150 kW (3)
CCS: 150 kW (2) CCS: 150 kW (2)
CHA: 50 kW CHA: 50 kW (4) CCS: 150 kW (2)
Output voltage range CCS: 100-920V CCS: 100-920V CCS: 100-920V CCS: 100-920V
CHA: 100-500V CHA: 100-500V CCS: 100-920V
Maximum output current CCS: 250A CCS: 200A CCS: 250A CCS: 250A
CHA: 125A CHA: 200A CCS: 250A
Connection
(1)
Also available with cable of 200 A (max output power: 150 kW @920 V or 80 kW @400 V)
(2)
150 kW @720-920V or 100 kW @400V
(3)
150 kW @750-920V or 80 kW @400V
(4)
HW suitable for up to 100 kW following FW update
Raption 150 Lite Models CCS250 (1) CCS200 CHA125 CCS250 CHA200 CCS250 CCS250 (1)
Maximum output power CCS: 100 kW (2)
CCS: 100 kW (2)
CCS: 100 kW CCS: 100 kW
CHA: 50 kW CHA: 50 kW (3) CCS: 100 kW
Output voltage range CCS: 100-920V CCS: 100-920V CCS: 100-920V CCS: 100-920V
CHA: 100-500V CHA: 100-500V CCS: 100-920V
Maximum output current CCS: 250A CCS: 200A CCS: 250A CCS: 250A
CHA: 125A CHA: 200A CCS: 250A
Connection
(1)
Also available with cable of 200 A (max output power: 100 kW @920 V or 80 kW @400 V)
(2)
80 kW @400V
(3)
HW suitable for up to 100 kW following FW update
www.circontrol.com 31You can also read
