Prof. Dr. rer. nat. habil. Meinhard Kuna Liste der Publikationen - TU Bergakademie ...
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
2022
541 SEUPEL, A., KUNA, M.
Phenomenological modeling of thermomechanical coupling effects of highly alloyed
TRIP-steels at different stress states
Procedia Structural Integrity 30 (2022) pp. 10-17
DOI: 10.1016/j.prostr.2021.12.042
540 GANESH, R., GESELL, KUNA, M., FEDELICH, B., KIEFER, B.:
Procrackplast: Eine Software zur Simulation des 3D-Risswachstums unter grossen
plastischen Deformationen
Procrackplast: A Software for Simulating 3D Crack Growth under large plastic
deformation
DVM-Bericht 254 (2022) pp. 205-214
54. Tagung des DVM Arbeitskreises Bruchmechanik und Bauteilsicherheit, 22.-
23.02.2022, Berlin
DOI: 10.48447/Br-2022-021
Seite 1 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
2021
539 EL KHATIB, O., KUNA, M., KOZINOV, S.:
Transient thermal fracture analysis of ferroelectric ceramics under electromechanical
loading
Smart Materials and Structures 30 (2021) 085033 (13pp)
DOI: 10.1088/1361-665X/ac0f90
538 LUKHI, M., KUNA, M., HÜTTER, G.:
Micromechanical simulation of fatigue in nodular cast iron
under stress-controlled loading
Materials Design and Processing Communications (2021) Special Issue Article e214.
DOI: 10.1002/mdp2.214
537 YU, H., KUNA, M.:
Interaction integral method for computation of crack parameters K–T – A review
Engineering Fracture Mechanics 249 (2021) 107722
DOI: 10.1016/j.engfracmech.2021.107722
536 DUDE, P., SCHURIG, M., VON ENDE, S., ROTH, S., KIEFER, B., KUNA, M.:
Evaluation von PROCRACK im Vergleich zu Franc3D für die Vorhersage von
Risswachstum in industrieller Anwendungsumgebung
DVM-Bericht 253 (2021)
53. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit (2021)
DOI: 10.48447/Br-2021-027
535 GANESH, R., GESELL, S., KUNA, M., FEDELICH, B., KIEFER, B.:
Numerische Berechnung von ΔCTOD bei thermomechanischer
Ermüdungsrissausbreitung
DVM-Bericht 253 (2021)
53. Tagung des Arbeitskreises Bruchmechanik und Bauteilsicherheit (2021)
DOI: 10.48447/Br-2021-014
534 GESELL, S., FEDELICH, B., SKROTZKI, B., GANESH, R., ABRAHAM, J., KUNA, M., KIEFER, B.:
Numerical simulation and evaluation of crack propagation in time and space of exhaust
turbocharger hot parts under thermomechanical fatigue loading with finite element
programs
Proceedings FVV, No 1351, Autumn Conference 8 – 9 November (2021)
Dorint Am Nürburgring Hocheifel
533 SEUPEL, A., KUNA, M.:
Anwendung eines gradientenerweiterten Schädigungsmodells für die Simulation des
Versagens hochlegierter TRIP-Stähle
DVM-Bericht 253 (2021)
53rd Meeting of the Working Group Fracture Mechanics and Component Safety (2021)
pp. 33-42
DOI: 10.48447/Br-2021-004
Seite 2 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
532 WALLBURG F., MEYER K., BUDNITZKI M., KUNA M., KAULE F., SCHOENFELDER S.:
Influence of Microcracks on Strength of Diamond Wire Sawn Silicon Substrates
In: Abdel Wahab M. (eds) Proceedings of the 8th International Conference on Fracture,
Fatigue and Wear. FFW 2020 2020.
Lecture Notes in Mechanical Engineering. Springer, Singapore
DOI: 10.1007/978-981-15-9893-7_26
Seite 3 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
2020
531 ABENDROTH, M., HÜTTER, G., SETTGAST, CHR., MALIK, A., KIEFER, B., KUNA, M.:
A Hybrid Approach to Describe the Elastic-Plastic Deformation Behavior of 2D Cellular
Solids Including Damage Effects
Technische Mechanik 40-1 (2020) pp. 5–14
https://www.ovgu.de/techmech
DOI: 10.24352/UB.OVGU-2020-008
530 ABRAHAM, J., ROTH, S., KUNA, M.:
A cohesive zone model for thermomechanical fatigue
International Journal of Fatigue 136 (2020) 105572
(http://www.sciencedirect.com/science/article/pii/S0142112320301031)
DOI: 10.1016/j.ijfatigue.2020.105572
529 BURGOLD, A., DROSTE, M., SEUPEL, A., BUDNITZKI, M., BIERMANN, H., KUNA, M.:
Modeling of the cyclic deformation behavior of austenitic TRIP-steels
International Journal of Plasticity 133 (2020) 102792
DOI: 10.1016/j.ijplas.2020.102792
528 EL KHATIB, O., KUNA, M., KOZINOV, S.:
Switching induced heating at the crack tip in ferroelectric ceramics
International Journal of Fracture (2019) pp. 1-14
DOI: 10.1007/s10704-019-00415-4
527 LUDWIG, C., RABOLD, F., KUNA, M., SCHURIG, M., SCHLUMS, H.:
Simulation of anisotropic crack growth behavior of nickel base alloys under
thermomechanical fatigue
Engineering Fracture Mechanics 224 (2020) 106800
DOI: 10.1016/j.engfracmech.2019.106800
526 NEUMANN, M., GEHRE, P., HUBÁLKOVÁ, J., ZIELKE, H., ABENDROTH; M., ANEZIRIS; G.:
Statistical Analysis of the Flexural Strength of Free-Standing Flame-Sprayed Alumina
Coatings Prior and After Thermal Shock
Journal of Thermal Spray Technology (2020)
DOI: 10.1007/s11666-020-01114-6
525 RAJENDRAN, M., K., KUNA, M., BUDNITZKI, M.
Undercooling versus stress induced martensitic phase transformation: The case of
MgO – partially stabilized zirconia
Computational Materials Science 174, March (2020) 109460
DOI: 10.1016/j.commatsci.2019.109460
524 SETTGAST, C., HÜTTER, G., KUNA, M., ABENDROTH, M.:
A hybrid approach to simulate the homogenized irreversible elastic–plastic
deformations and damage of foams by neural networks
International Journal of Plasticity 126 (2020) 102624
DOI: 10.1016/j.ijplas.2019.11.003
Seite 4 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
523 SEUPEL, A., HÜTTER, G., KUNA, M.:
On the identification and uniqueness of constitutive parameters for a non-local GTN-
model
Engineering Fracture Mechanics 229 (2020) 106817
DOI: 10.1016/j.engfracmech.2019.106817
522 WALLBURG, F., KUNA, M., BUDNITZKI. M, SCHOENFELDER, S.
Experimental and numerical analysis of scratching induced damage during diamond
wire sawing of silicon
Wear 454–455 (2020) 203328
DOI: 10.1016/j.wear.2020.203328
521 WOLF, C. H., BURGOLD, A., HENKEL, S., KUNA, M., BIERMANN, H.:
Crack growth behaviour in biaxial stress fields: Calculation of K- factors for cruciform
specimens
Theoretical and Applied Fracture Mechanics 107 (2020) pp. 102521
DOI: 10.1016/j.tafmec.2020.102521
520 ZIELKE, H., W ETZIG, T., HIMCINSCHI, C., ABENDROTH, M., KUNA, M., ANEZIRIS, C. G.:
Influence of carbon content and coking temperature on the biaxial flexural strength of
carbon-bonded alumina at elevated temperatures
Carbon 159 (2020) pp. 324-332
DOI: 10.1016/j.carbon.2019.12.042
519 ABRAHAM, J., ROTH, S., KUNA, M.
Ein Kohäsivzonenmodell für Thermomechanische Ermüdung
A Cohesive Zone Model for Thermomechanical Fatigue
52. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit, 18.-
19.02.2020, Hamburg
DVM-Bericht 252 (2020) pp. 147-156
ISSN 2366-4797
518 HÜTTER, G., SEUPEL, A., KUNA, M., KIEFER, B.:
An initiative towards a standardized gradient-enhanced model of ductile damage for
engineering applications
ESIS Technical Committee 8 in Neubiberg, Januar 2020
517 LUKHI, M., HÜTTER, G., KUNA, M.:
A Numerical Simulation of Fatigue Crack Growth in Nodular Cast Iron by Plastic
Collapse of the Intervoid Ligaments
Numerische Simulation des Ermudungsrisswachstum in duktilem Gusseisen in folge
plastische Versagens des Mikroligamente
52. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit, 18.-
19.02.2020, Hamburg
DVM-Bericht 252 (2020) pp. 107-116
ISSN 2366-4797
Seite 5 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
516 RAJENDRAN, M., K., BUDNITZKI, M., KUNA, M.:
Multi-scale Modeling of Partially Stabilized Zirconia with Applications to TRIP-Matrix
Composites
In: Biermann, H., Aneziris C. G. (Editors) Austenitic TRIP/TWIP Steels and Steel-
Zirconia Composites — Design of Tough, Transformation-Strengthened Composites
and Structures
Springer Series in Materials Science, vol. 298, (2020) chapter 21 pp. 679-721
Springer International Publishing, Cham. (zum verlinken:
https://www.springer.com/gp/book/9783030426026)
ISBN 978-3-030-42603-3 (eBook)
DOI: 10.1007/978-3-030-42603-3_21
515 SELENT, M., ABENDROTH, M., KUNA, M., KIEFER, B.:
Experimentelle und numerische Untersuchungen zum Kriechverhalten des warmfesten
Chromstahls X10CrMoVNb9-1 mittels Small Punch Test
Experimental and numerical investigations on the creep behaviour of heat-resisting
chromium steel X10CrMoVNb9-1 by means of small punch test
52. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit, 18.-
19.02.2020, Hamburg
DVM-Bericht 252 (2020) pp. 167-176
ISSN 2366-4797
514 SEUPEL, A., BURGOLD, A., PRÜGER, S., BUDNITZKI, M., KUNA, M.:
Modeling of the Thermomechanical Behavior, Damage, and Fracture of High Alloy
TRIP-Steel
In: Biermann, H., Aneziris C. G. (Editors) Austenitic TRIP/TWIP Steels and Steel-
Zirconia Composites — Design of Tough, Transformation-Strengthened Composites
and Structures
Springer Series in Materials Science, vol. 298, (2020) chapter 22, pp. 723-769
Springer International Publishing, Cham. (zum verlinken:
https://www.springer.com/gp/book/9783030426026)
ISBN 978-3-030-42603-3 (eBook)
DOI: 10.1007/978-3-030-42603-3_22
513 WOLF, C. H., HENKEL, S., BURGOLD, A., QIU, Y., KUNA, M., BIERMANN, H.:
Kreuzproben zur Untersuchung des Risswachstums bei ein- und mehrachsiger
Ermüdungsbeanspruchung
Cruciform Specimens for the Investigation of Crack Growth under Uniaxial and
Multiaxial Fatigue Loading
52. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit, 18.-
19.02.2020, Hamburg
DVM-Bericht 252 (2020) pp. 41-50
ISSN 2366-4797
Seite 6 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
2019
512 BUDNITZKI, M., KUNA, M.
Scratching of silicon surfaces
International Journal of Solids and Structures (2019) pp. 211-216
DOI: 10.1016/j.ijsolstr.2018.11.024
511 EL KHATIB, O., KOZINOV, S. , KUNA, M.:
A micro–macro scale approach for thermal effects in ferroelectrics
Continuum Mechanics and Thermodynamics 31 (2019) pp. 1439–1452
DOI: 10.1007/s00161-019-00760-8
510 HENKEL, S., W OLF, C. H., BIERMANN, H., BURGOLD, A. KUNA, M.:
Cruciform specimens used for determination of the influence of T-stress on fatigue
crack growth with overloads on aluminum alloy Al 6061 T651
Frattura ed Integrità Strutturale 13 (2019) pp. 135-143
DOI: 10.3221/IGF-ESIS.48.16
509 KOZINOV, S., KUNA, M.
Mechanically induced ferroelectric domain evolution during crack propagation
Smart Materials and Structures 28-2 (2019) 024001 (13pp)
DOI: 10.1088/1361-665X/aaf67d
508 KOZINOV, S., KUNA, M.:
Micromechanical simulation of ferroelectric domain processes at crack tips
Archive of Applied Mechanics 89 (2019) pp. 1069–1083
DOI: 10.1007/s00419-018-1419-1
507 SETTGAST, C. , ABENDROTH, M. , KUNA, M.
Constitutive modeling of plastic deformation behavior of open-cell foam structures
using neural networks
Mechanics of Materials 131 (2019) 10pp.
DOI: 10.1016/j.mechmat.2019.01.015
506 SETTGAST, C., RANGLACK-KLEMM, Y., HUBALKOVA, J., ABENDROTH, M., KUNA, M.,
BIERMANN, H.
Validation of an experimental-numerical approach for the high temperature behaviour
of open-cell ceramic foams
Journal of the European Ceramic Society 39 (219) pp. 610-617
DOI: 10.1016/j.jeurceramsoc.2018.09.022
505 SEUPEL, A., KUNA, M.:
A gradient-enhanced damage model motivated by engineering approaches to ductile
failure of steels
International Journal of Damage Mechanics (2019) online pp. 1-36
DOI: 10.1177/1056789518823879
504 STORM, J., ABENDROTH, M., KUNA, M.
Effect of morphology, topology and anisoptropy of open cell foams on their yield
surface
Mechanics of Materials 137 (2019) pp. 103145
DOI: 10.1016/j.mechmat.2019.103145
Seite 7 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
503 WALLBURG, F., KUNA, M., SCHÖNFELDER, S.:
Material Removal Simulation in Sawing Processes of Photovoltaic Silicon
Cambridge University Press
MRS Advances 4 (13),(2019) pp. 761-769
DOI: 10.1557/adv.2019.95
502 WOLF, C. H., HENKEL, S., BURGOLD, A., QIU, Y., KUNA, M., BIERMANN, H.:
Fatigue Crack Growth in Austenitic Stainless Steel: Effects of Phase shifted Loading
and Crack Paths
Advanced Engineering Materials 21 (2019) pp. 1800861
DOI: 10.1002/adem.201800861
501 WOLF, C. H., HENKEL, S., BURGOLD, A., QIU, Y., KUNA, M., BIERMANN, H.:
Investigation of fatigue crack growth under in-phase loading as well as phase-shifted
loading using cruciform specimens
International Journal of Fatigue 124 (2019) pp. 595-617
DOI: 10.1016/j.ijfatigue.2019.03.011
500 YU, H., KUNA, M., KOZINOV, S.
Effect of large-scale domain switching on intensity factors for a crack in 3D ferroelectric
single crystals using the I-integral method
International Journal of Solids and Structures 161 (2019) pp. 203–218
DOI: 10.1016/j.ijsolstr.2018.11.015
499 ROTH, ST., KUNA, M., KIEFER, B.
Simulation of Fatigue with Cyclic Cohesive Zone Models
Proceedings of the 8th GACM Colloquium on Computational Mechanics for Young
Scientists from Academia and Industry August 28–30, 2019 in Kassel, Germany
MS 06: Modeling and simulation of fatigue in brittle and ductile materials
498 WOLF, C. H., BURGOLD, A., HENKEL, S., KUNA, M., BIERMANN, H.:
Carpinteri, A.; Morel, F. & Palin-Luc, T. (Eds.)
Cruciform specimens for the determination of crack growth behaviour in biaxial stress
fields: calculation of K-factors
MATEC Web of Conferences, EDP Sciences 300, 11008 (2019)
DOI: 10.1051/matecconf/201930011008
Seite 8 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
2018
497 BURGOLD, A., HENKEL, S., ROTH, ST., KUNA, M., BIERMANN, H.
Fracture mechanics testing and crack growth simulation of highly ductile austenitic
steel
Materials Testing 60 (2018) pp. 341-348
DOI: 10.3139/120.111156
496 BURGOLD, A., ROTH. ST., KUNA, M.:
Cohesive Zone Modeling of Stable Crack Propagation in Highly Ductile Steel
Key Engineering Materials 774 (2018) pp. 167-172
DOI: 10.4028/www.scientific.net/KEM.774.167
495 GIANG, N. A., SEUPEL, A., KUNA, M., HÜTTER, G.
Dislocation pile-up and cleavage: effects of strain gradient plasticity on micro-crack
initiation in ferritic steel
International Journal of Fracture 214-1 (2018) pp. 1-15
DOI: 10.1007/s10704-018-0313-8
494 INGRAFFEA, A., KUNA, M. (EDITORS)
Dr. Paul Croce, Paris, August 7, 1930 – January 15, 2017
Engineering Fracture Mechanics 187 (2018) pp. 1-10
DOI: 10.1016/j.engfracmech.2017.10.001.
493 INGRAFFEA, A., KUNA, M., FENG, X.Q., ZHANG, J.
Editorial to the Special Issue 50th Anniversary of EFM
Engineering Fracture Mechanics 187 (2018) pp. 16-21
DOI: 10.1016/j.engfracmech.2018.01.029.
492 KOZINOV, S., KUNA, M.
Micromechanical simulation of ferroelectric domain processes at crack tips
Archive of Applied Mechanics (2018) pp. 1-15
DOI: 10.1007/s00419-018-1419-1
491 KOZINOV, S., KUNA, M.
Simulation of fatigue damage in ferroelectric polycrystals under mechanical/electrical
loading
Journal of the Mechanics and Physics of Solids 116 (2018) pp. 150-170
DOI: 10.1016/j.jmps.2018.03.013
490 LUKHI, M., KUNA, M., HÜTTER, G.
Numerical investigation of low cycle fatigue mechanism in nodular cast iron
International Journal of Fatigue 113 (2018) pp. 290-298
DOI: 10.1016/j.ijfatigue.2018.04.019
489 SEUPEL, A., HÜTTER, G., KUNA, M.:
An efficient FE-implementation of implicit gradient-enhanced damage models to
simulate ductile failure
Engineering Fracture Mechanics 199 (2018) pp. 41-60
DOI: 10.1016/j.engfracmech.2018.01.022
Seite 9 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
488 YU, H., W ANG, J., KOZINOV, S., KUNA, M.
Phase field analysis of crack tip parameters in ferroelectric polycrystals under large-
scale switching
Acta Materialia 154 (2018) pp. 334-342
DOI: 10.1016/j.actamat.2018.05.042
487 ZIELKE, H., ABENDROTH, M., KUNA, M., KIEFER, B.
Determining the Fracture Toughness of Ceramic Filter Materials Using the Miniaturized
Chevron-Notched Beam Method at High Temperature
Ceramics International 44-12 (2018) pp.13986-13993
DOI: 10.1016/j.ceramint.2018.04.248
486 BURGOLD, A., HENKEL, S., ROTH, ST., KUNA, M., BIERMANN, H.
Experimentelle und numerische Untersuchung eines hochduktilen austenitischen
Gussstahles
In: 50. Tagung Arbeitskreis Bruchvorgänge
DVM-Bericht 250 (2018) pp. 217-226
485 EL-KHATIB, O., KUNA, M.
Temperature influence on ferroelectric materials
In: Proceeding of the 3rd Seminar on the Mechanics of Multifunctional Materials (2018)
pp. 23-26
Bad Honnef, 11.-15.06.2018
ISBN-10 3-9818074-4-8, ISBN-13 978-3-9818074-4-8
484 GIANG, N. A., KUNA, M., HÜTTER, G.
Effect of Gradient Plasticity on Crack Initiation and Propagation in the Ductile-Brittle
Transition Region of Ferritic Steel
ECF22 - Loading and Environmental effects on Structural Integrity
In: Procedia Structural Integrity Procedia 13 (2018) pp. 45-50
DOI: 10.1016/j.prostr.2018.12.008
483 HENKEL, S., W OLF, C. H., BURGOLD, A., KUNA, M., BIERMANN, H.:
Cruciform specimens as a tool to investigate fatigue crack growth behavior of metals
6th International Conference on Crack Paths, 19.-21.09.2018
482 KOZINOV, S., KUNA, M.
Investigation of mechanically induced crack tip fields in ferroelectric materials
In: Proceedings of the 3rd Seminar on the Mechanics of Multifunctional Materials
(2018) pp. 63-66
Bad Honnef, 11.-15.06.2018
EAN 9783981807448
481 LUKHI, M., HÜTTER, G., KUNA. M.
A Novel Micromechanics Approach for Understanding of Fatigue in Nodular Cast Iron
ECF22 - Loading and Environmental effects on Structural Integrity
In: Procedia Structural Integrity Procedia 13 (2018) pp. 607–612
DOI: 10.1016/j.prostr.2018.12.100
Seite 10 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
480 SELENT, M., ABENDROTH, M., KUNA, M., KIEFER, B.:
Experimental investigations on the failure of a coating-substrate compound by means
of the C-specimen concept and the small punch test
5th International Conference SSTT (Small Sample Test Techniques), 10.-12.07.2018,
Swansea, Wales
Conference Proceedings (2018), pp. 312-320
479 WALLBURG, F., KUNA, M., SCHÖNFELDER, S.:
A Numerical Model for the Simulation of Subsurface Damage During Wire Sawing of
Silicon
36. CADFEM ANSYS Simulation Conference Leipzig, October 10-12 (2018)
478 WOLF, C. H., HENKEL, S., QIU, Y., ACKERMANN, S., BURGOLD, A., KUNA, M., BIERMANN,
H.:
Fatigue crack growth under in-phase loading as well as 180° phase- shifted loading of
austenitic stainless steel
6th International Conference on Crack Paths, 19.-21.09.2018
477 YU, H., KUNA, M.
A J-Interaction Integral to Compute Force Stress and Couple Stress Intensity Factors
for Cracks in Functionally Graded Micropolar Materials
In: Advanced Structured Materials 80 (2018) pp. 419-448
Advanced in Mechanics of Materials and Structural Analysis - In Honor of Reinhold
Kienzler
DOI: 10.1007/978-3-319-70563-7_19
Seite 11 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
2017
476 GIANG, N.A., KUNA, M., HÜTTER, G.
Influence of carbide particles on crack initiation and propagation with competing
ductile-brittle transition in ferritic steel
Theoretical and Applied Fracture Mechanics 92 (2017) pp. 89-98
DOI: 10.1016/j.tafmec.2017.05.015
475 GLADKYY, A., KUNA, M.
DEM simulation of polyhedral particle cracking using a combined Mohr–Coulomb–
Weibull failure criterion
Granular Matter (2017) 19 (3), art. no. 41
DOI 10.1007/s10035-017-0731-8
474 HEIN, J., KUNA, M.
A generalized J-integral for thermal shock analyses of 3D surface cracks in spatially
and temperature dependent materials
Theoretical and Applied Fracture Mechanics 92 (2017) pp. 318 - 330
DOI: 10.1016/j.tafmec.2017.04.013
473 ROTH, S., KUNA, M.
Prediction of size-dependent fatigue failure modes by means
of a cyclic cohesive zone model
International Journal of Fatigue 100 (2017) pp. 58–67
DOI: 10.1016/j.ijfatigue.2017.01.044
472 SETTGAST, C.,SOLAREK, J., KLEMM, Y., ABENDROTH, S., KUNA, M., BIERMANN, H.
Prediction of High Temperature Behavior of Open-Cell Ceramic Foams Using an
Experimental-Numerical Approach
Advanced Engineering Materials (2017) pp. 1-9, online
DOI: 10.1002/adem.201700082
471 ZIELKE, H., ABENDROTH, M., KUNA, M.
Fracture Toughness Characterization of Carbon Bonded Alumina Using Chevron
Notched Specimens
Key Engineering Materials 754 (2017) pp. 71-74
DOI: 10.4028/www.scientific.net/KEM.754.71
470 ZIELKE, H., SCHMIDT, A., ABENDROTH, M., KUNA, M., ANEZIRIS, C. G.
Influence of the specimen manufacturing process on the strength of carbon-bonded
alumina (Al203-C)
Advanced Engineering Materials (2017) pp.1-7
DOI: 10.1002/adem.201700083
469 HÜTTER, G., GIANG, N. A., KUNA, M.
Mikromechanische Simulation des Einflusses von Einschlüssen auf die Bruchzähigkeit
ferritischer Stähle
In: 49. Tagung Arbeitskreis Bruchvorgänge
DVM-Bericht 249 (2017) pp. 141-148
Seite 12 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
468 KOZINOV, S., KUNA, M.
Numerical investigation of crack propagation direction in ferroelectric actuators
Proc. SPIE 10165, Behavior and Mechanics of Multifunctional Materials and
Composites 2017, 1016507 (April 11, 2017)
DOI: 10.1117/12.2258229
467 KOZINOV, S., KUNA, M.:
Numerical Analysis of Fracture of Pre-stressed Ferroelectric Actuator Taking into
Account Cohesive Zone for Damage Accumulation
Smart Structures and Materials, Selected Papers from the 7th ECCOMAS Thematic
Conference on Smart Structures and Materials 2015
Hrsg. A.L. Araujo and C.A. Mota Soares (eds.), Springer International Publishing
Switzerland 2017
Computational Methods in Applied Sciences 43 (2017) pp. 23-39
Print ISBN 978-3-319-44505-2; Online ISBN 978-3-319-44507-6
DOI:10.1007/978-3-319-44507-6_2
466 LUDWIG, C., RABOLD, F., ROTH, S., KUNA, M., SCHURIG, M., DUÓ, P., SCHLUMS, H.
Simulation von Rissausbreitung in der Nickelbasislegierung ALLVAC® 718Plus
In: 49. Tagung Arbeitskreis Bruchvorgänge
DVM-Bericht 249 (2017) pp. 169-178
465 RABOLD, F., KUNA, M., FUSKOVA, L., TÖNIßEN, N.
Bruchmechanische Bewertung der Rotornabe einer Windkraftanlage
In: 49. Tagung Arbeitskreis Bruchvorgänge
DVM-Bericht 249 (2017) pp. 287-296
464 SETTGAST, C., ABENDROTH, M., KUNA, M.
Fracture Mechanical Analysis of Open-Cell Ceramic Foams (Poster)
CISM-Course "Mechanics of Liquid and Solid Foams", Udine, Italien
463 SETTGAST, C., ABENDROTH, M., KUNA, M.
Investigation of creep behavior of open cell ceramic Kelvin foam.
Proceedings of the International Conference on Creep and Fracture of Engineering
Materials and Structures (Creep2017) pp. 167-168
St. Petersburg, Russia
ISBN: 978-5-7422-5799-8
462 SEUPEL, A., KUNA, M.
Phenomenological Modeling of Strain Hardening, Phase Transformation and Damage
Effects of TRIP-Steeels
XIV International Conference on Computational Plasticity. Fundamentals and
Applications, COMPLAS XIV (04.-10.09.2017) 12 pp.
(Eds.) E. Onate, D.R.J. Owen, D. Peric & M. Chiumenti
Seite 13 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
2016
461 BUDNITZKI, M., KUNA, M.
Experimental and numerical investigations on stress induced phase transitions in
silicon
International Journal of Solids and Structures 106–107 (2017) pp. 294–304
DOI: 10.1016/j.ijsolstr.2016.09.006
460 BUDNITZKI, M., KUNA, M.
Stress induced phase transitions in silicon
Journal of the Mechanics and Physics of Solids 95 (2016) pp. 64-91
DOI:10.1016/j.jmps.2016.03.017
459 GIANG, N. A., HÜTTER, G., KUNA, M.
Micromechanical Modeling of Crack Initiation and Propagation in the Ductile-Brittle
Transition Region
Key Engineering Materials 713 (2016) pp. 58-61
DOI: 10.4028/www.scientific.net/KEM.713.58
458 HEIN, J., EL KHATIB, O., KUNA, M.
Influence of Interfaces on Crack Propagation through a Layered Refractory Loaded ba
Thermal Shock
Journal of Ceramic Science and Technology 07-02 (2016) pp. 203-208
www.ceramic-science.com
DOI:10.4416/JCST2016-00004
457 NASSAUER, B., LIEDKE, T., KUNA, M.
Development of a coupled discrete element (DEM) – smoothed particle hydrodynamics
(SPH) simulation method for polyhedral particles
Computational Particle Mechanics 3/1 (2016) pp. 95-106
DOI: 10.1007/s40571-015-0097-9
456 SELENT, M., ABENDROTH, M., KUNA, M.
Experimental and Numerical Investigations on the Creep Behaviour of Heat-Resisting
Chromium Steel X10CrMoVNb9-1 by Means of Small Punch Test
Transactions of the Indian Institute of Metals 69-2 (2016) pp. 629-633
Springer Private Ltd., India
DOI: 10.1007/s12666-015-0797-0
455 SETTGAST, C., ABENDROTH, M., KUNA, M.
Fracture mechanical analysis of open cell ceramic foams under multi-axial mechanical
loading
Archive of Applied Mechanics 86 (2016) pp. 335–349
DOI:10.1007/s00419-015-1107-3
454 SETTGAST, C., ABENDROTH, M., KUNA, M.
Fracture Mechanical Analysis of Open Cell Ceramic Foams Under Thermal Shock
Loading
Journal of Multiscale Modelling 7-4 (2016) 1640006 (6 pages)
World Scientific Publishing Europe Ltd.
DOI: 10.1142/S1756973716400060
Seite 14 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
453 SEUPEL, A. ECKNER, R., BURGOLD, A., KUNA, M., KRÜGER, L.
Experimental characterization and damage modeling of a particle reinforced TWIP-
steel matrix composite
Materials Science and Engineering: A 662-26 (2016) pp. 342–355
DOI: 10.1016/j.msea.2016.03.056
452 STORM, J., ABENDROTH, M., KUNA, M.
Numerical and analytical solutions for anisotropic yield surfaces of the open-cell Kelvin
foam
International Journal of Mechanical Sciences 105 (2016) pp. 70 – 82
DOI:10.1016/j.ijmecsci.2015.10.014
451 YU, HJ., SUMIGAW , T., KITAMURA, T., KUNA, M.
Domain-independent I-integrals for force and couple stress intensity factor evaluations
of a crack in micropolar thermoelastic medium
International Journal of Solids and Structures 100–101 (2016) pp. 470–484
DOI: 10.1016/j.ijsolstr.2016.09.020
450 YU, HJ., W ANG, J., SHIMADA, T., W U, H., W U, L., KUNA, M., KITAMURA, T.
An I-integral method for crack-tip intensity factor variation due to domain switching in
ferroelectric single-crystals
Journal of the Mechanics and Physics of Solids 94 (2016) pp. 207–229
DOI: 10.1016/j.jmps.2016.04.031
449 ZIELKE, H., ABENDROTH, M., KUNA, M.
Determination of fracture mechanical properties of carbon bonded alumina using
miniaturized specimens
Key Engineering Materials 713 (2016) pp. 70-73
15th International Conference on Fracture and Damage Mechanics, Alicante, Spain, 14
- 16 Sept. 2016
DOI: 10.4028/www.scientific.net/KEM.713.70
448 ZIELKE, H., ABENDROTH, M., KUNA, M.
Determining fracture mechanical properties for brittle materials using the ball on three
balls test combined with numerical simulations
Theoretical and Applied Fracture Mechanics 86 (2016) pp. 19–24
DOI: 10.1016/j.tafmec.2016.09.001
447 HEIN, J., KUNA, M.
3D J-integral for functionally graded and temperature dependent thermoelastic
materials
21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy
Procedia Structural Integrity 2 (2016) pp. 2462–2254
DOI: 10.1016/j.prostr.2016.06.281
446 RABOLD, F., KUNA, M.
Finite-Elemente-Simulation des Ermüdungsrisswachstums
Glanzlicher der Forschung an der TU Bergakademie Freiberg - 250 Jahre nach Ihrer
Gründung (2016) pp. 237-246
Hrsg. Prof.-Dr.-Ing. Ulrich Groß, im Auftrag des Rektors der TU Bergakademie Freiberg
Seite 15 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
445 ROTH, S., KUNA, M.
Anwendung eines zyklischen Kohäsivzonenmodells: Größeneffekt und zyklische
Versagensbewertung
Application of a cyclic cohesive zone model: Size effect and cyclic failure assessment
DVM-Bericht 248 (2016) pp. 11-20
48. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit, 16.-
17.02.2016
Freiburg
444 SELENT, M., ABENDROTH, M., KUNA, M.
Experimental and numerical investigations on the creep behaviour of heat-resisting
chromium steel X10CrMoVNb9-1 by means of Small Punch Test
Conference proceedings, IGCAR - 7th International Conference on Creep Fatigue and
Creep-Fatigue Interaction (2016)
19-22 January 2016
Kalpakkam, India
443 SELENT, M., KUNA, M.
Experimentelle Untersuchungen zum Versagen eines Korrosionsschutzschicht-
Substrat-Verbundes mittels C-Proben-Konzept und Small Punch Test
Experimental investigations on the failure of a coating-substrate-compound by means
of c-specimen-concept and small punch test
DVM-Bericht 248 (2016) pp. 171-180
48. DVM Arbeitskreis Bruchvorgänge, 16.-17.02.2016
Freiburg
442 SETTGAST, C., ABENDROTH, M., KUNA, M.
Bruchmechanische Analyse von offenzelligen Keramischen Schäumen
Fracture Mechanical Analysis of open cell Ceramic Foams
DVM-Bericht 248 (2016) pp. 51-60
48. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit, 16.-
17.02.2016
Freiburg
441 ZIELKE, H., ABENDROTH, M., KUNA, M.
Bestimmung der bruch- und schädigungsmechanischen Eigenschaften keramischer
Filterwerkstoffe aus Kleinstproben
Determination of fracture and damage mechanical properties of ceramic filter materials
using miniaturized specimens
DVM-Bericht 248 (2016) pp. 61-70
48. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit, 16.-
17.02.2016
Freiburg
440 ZYBELL, L., KUNA, M., HENKEL, S., HÜBNER, P.
Vorhersage von Verzögerungseffekten beim Ermüdungsrisswachstum mit einzelnen
Überlasten
Prediction of retardation effects during fatigue crack growth with single overloads
DVM-Bericht 248 (2016) pp. 181-190
48. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit, 16.-
17.02.2016
Freiburg
Seite 16 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
2015
439 BURGOLD, A., KUNA, M., PRÜGER, S.
Crack tip fields in ductile materials with martensitic phase transformation – A numerical
2D study
Engineering Fracture Mechanics 138 (2015) pp. 169–184
DOI: 10.1016/j.engfracmech.2015.03.002
438 HENSL, T., MÜHLICH, U., BUDNITZKI, M., KUNA, M.
An eigenstrain approach to predict phase transformation and self-accommodation in
partially stabilized zirconia
Acta Materialia 86 (2015) pp. 361–373
DOI: 10.1016/j.actamat.2014.12.032
437 HÜTTER, G., ZYBELL, L., KUNA, M.
Micromechanical modeling of crack propagation in nodular cast iron with competing
ductile and cleavage failure
Engineering Fracture Mechanics 147 (2015) pp. 388-397
DOI: 10.1016/j.engfracmech.2015.06.039
436 HÜTTER, G., ZYBELL, L., KUNA, M.
Micromechanisms of fracture in nodular cast iron: From experimental findings towards
modeling strategies - A Review
Engineering Fracture Mechanics 144 (2015) pp. 118-141
DOI: 10.1016/j.engfracmech.2015.06.042
435 HÜTTER, G., ZYBELL, L., KUNA, M.
Mikromechanische Simulation der Rissinitiierung und -ausbreitung in duktilem
Gusseisen
Giesserei-Praxis 11 (2015) pp. 521-526
434 KOZINOV, S., KUNA, M.
Simulation of damage in ferroelectric actuators by means of cohesivezone model
Sensors and Actuators A: Physical 233 (2015) pp. 176–183
DOI: 10.1016/j.sna.2015.06.030
433 KULAWINSKI, D., ACKERMANN, S., SEUPEL, A., LIPPMANN, T., HENKEL, S., KUNA, M.,
WEIDNER, A., BIERMANN, H.
Deformation and strain hardening behavior of powder metallurgical TRIP steel under
quasi-static biaxial-planar loading
Materials Science & Engineering A 642 (2015) pp. 317-329
DOI: 10.1016/j.msea.2015.06.083
432 KUNA, M.
Anwendung schädigungsmechanischer Materialmodelle
ACAMONTA. Zeitschrift für Freunde und Förderer der TU Bergakademie Freiberg 22.
Jahrgang (2015) pp. 35-39
431 KUNA, M., BURGOLD, A., PRÜGER, S.
Stress analysis and configurational forces for cracks in TRIP-steels
International Journal of Fracture 193, 2 (2015) pp. 171-187
DOI: 10.1007/s10704-015-0027-0
Seite 17 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
430 KUNA, M., ROTH, S.
General remarks on cyclic cohesive zone models
Special Invited Article Celebrating IJF at 50
International Journal of Fracture 196-1 (2016) pp. 147-167
DOI: 10.1007/s10704-015-0053-y
429 MIKULICH, V., NASSAUER, B., KUNA, M., BRÜCKER, C.
Experimental and numerical study of interaction between particle loaded fluid and a
rough wall with micro pillars
Tribology International 83 (2015) pp. 42–50
DOI: 10.1016/j.triboint.2014.10.009
428 NASSAUER, B., KUNA, M.
Impact of micromechanical parameters on wire sawing: a 3D discrete element analysis
Computational Particle Mechanics 2 (2015) pp. 63–71
DOI 10.1007/s40571-015-0036-9
427 RASCHE, S., KUNA, M.
Improved small punch testing and parameter identification of ductile to brittle materials
International Journal of Pressure Vessels and Piping 125 (2015) pp. 23–34
DOI 10.1016/j.ijpvp.2014.09.001
426 SEUPEL, A., KUNA, M.
Application of a Local Continuum Damage Model to Porous TRIP-Steel
Applied Mechanics and Materials 784 (2015) pp. 484-491
DOI: 10.4028/www.scientific.net/AMM.784.484
425 STORM, J., ABENDROTH, M., KUNA, M.
Influence of curved struts, anisotropic pores and strut cavities on the effective elastic
properties of open-cell foams
Mechanics of Materials 86 (2015) pp. 1–10
DOI: 10.1016/j.mechmat.2015.02.012
424 ZHANG, D., ABENDROTH, M., KUNA, M., STORM, J.
Multi-axial brittle failure criterion using Weibull stress for open Kelvin cell foams
International Journal of Solids and Structures (2015) online
DOI: 10.1016/j.ijsolstr.2015.04.020
423 BUDNITZKI, M., BEHM, T., KUNA, M., MÖLLER, H. J.
Experimental and numerical investigations on the formation of surface defects during
machining of silicon wafers
IN: Functional structure design of new high-performance materials via atomic design
and defect engineering -- ADDE Rafaja, D. (ed.) SAXONIA (2015) pp. 42-62
Freiberg
Seite 18 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
422 BURGOLD, A., KUNA, M.
Beanspruchungsanalyse von Rissen in TRIP-Stählen und der Einfluß der
Phasenumwandlung, Streess analysis of cracks in TRIP-steels and influence of phase
transformation
47. Tagung Arbeitskreis Bruchvorgänge
DVM-Bericht 247 (2015) pp. 209-218
09.-11.02.2015
Freiberg
ISSN 1616-4687
421 HORN, M., ZYBELL, L., KUNA, M., HELFEN, L., MORGENEYER, T. F.
Untersuchung der duktilen Versagensmechanismen in Gusseisen unter
Schubbeanspruchung mittels Röntgenlaminographie, Investigation of ductile Failure
mechanisms in cast iron under shear loading by means of x-Ray laminography
47. Tagung Arbeitskreis Bruchvorgänge
DVM-Bericht 247 (2015) pp. 177-178
09.-11.02.2015
Freiberg
ISSN 1616-4687
420 KOZINOV, S., KUNA, M.
Anwendung eines elektromechanischen Kohäsivzonenmodells auf ferroelektrische
Aktuatoren, Electromechanical cohesive zone model applied to ferroelectric actuators
47. Tagung Arbeitskreis Bruchvorgänge
DVM-Bericht 247 (2015) pp. 3-14
09.-11.02.2015
Freiberg
ISSN 1616-4687
419 KOZINOV, S., KUNA, M.
Micromechanical simulation of ferroelectric domain process at crack tip
Proceedings des 11th International Workshop "Direct and Inverse Problems in
Piezoelectricity" (2015) p. 8
418 KOZINOV, S., KUNA, M.
Numerical Analysis of Fracture of Pre-stressed ferroelectric actuator taking into
account cohesive zone for damage accumulation
SMART (2015) Ponta Delagda, Portugal
417 KUNA, M.
40 Jahre Finite Elemente in der Bruchmechanik - Historische Rückblicke und
Einsichten, 40 years finite elements in fracture mechanics - historical reviews and
insights
47. Tagung Arbeitskreis Bruchvorgänge
DVM-Bericht 247 (2015) pp. 1-2
09.-11.02.2015
Freiberg
ISSN 1616-4687
Seite 19 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
416 KUNA, M., SEUPEL, A.
A Phenomenological Damage Model for Elastoplastic Behavior of Particle Reinforced
TRIP-Steel Matrix Composites based on Micromechanical Simulations
CFRAC (2015) Cachan, Frankreich
415 ROTH, S, HOFFMANN, M., SKUPSCH, C., KUNA, M., BIERMANN, H., CHAVES, H.
Experimental and numerical assessment of protective coatings deposited by high
velocity oxygen fuel flame spraying: Spraying process and thermomechanical behavior
IN: Functional structure design of new high-performance materials via atomic design
and defect engineering -- ADDE Rafaja, D. (ed.) SAXONIA (2015) pp. 224-240
Freiberg
414 ROTH, S., KUNA, M.
Assessment of Size-Dependent Fatigue Failure Modes Using a Cyclic Cohesive Zone
Model
CFRAC (2015) Cachan, Frankreich
413 SEUPEL, A., KUNA, M.
Erweiterung eines duktilen Schädigungsmodells zur Beschreibung von TRIP-Stählen,
An extended material model for ductile damage of TRIP-Steels
47. Tagung Arbeitskreis Bruchvorgänge
DVM-Bericht 247 (2015) pp. 83-92
09.-11.02.2015
Freiberg
ISSN 1616-4687
412 ZYBELL, L., HORN, M., KUNA, M., HELFEN, L., MORGENEYER, T. F.
In situ 3D observation of ductile failure mechanisms in cast iron under shear loading
CFRAC (2015) Cachan, Frankreich
Seite 20 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
2014
411 BÄCKER, D., KUNA, M., HÄUSLER, CHR.
Eigenfunctions of crack problems in the Mindlin plate theory
ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte
Mathematik und Mechanik, 1 – 13 (2014)
DOI: 10.1002/zamm.201300256
410 BURGOLD, A. , KUNA, M., PRÜGER, S.
Material forces in consideration of phase transformation in TRIP-steel
Procedia Materials Science 3 (2014) pp. 461-466
DOI: 10.1016/j.mspro.2014.06.077
409 HÜTTER, G., LINSE, T., ROTH, ST., MÜHLICH, U., KUNA, M.
A modeling approach for the complete ductile–brittle transition region: cohesive zone in
combination with a non-local Gurson-model
International Journal of Fracture 185 (2014) pp. 129–153
ISSN: 0376-9429
DOI: 10.1007/s10704-013-9914-4
408 HÜTTER, G., MÜHLICH, U. KUNA, M.
Micromorphic homogenization of a porous medium: elastic behavior and quasi-brittle
damage
Continuum Mechanics and Thermodynamics (2014) online
ISSN: 0935-1175
DOI 10.1007/s00161-014-0402-5
407 HÜTTER, G., ZYBELL, L., KUNA, M.
Micromechanical modeling of crack propagation with competing ductile and cleavage
failure
Procedia Materials Science 3 (2014) pp. 428-433
DOI: 10.1016/j.mspro.2014.06.072
406 HÜTTER, G., ZYBELL, L., KUNA, M.
Size effects due to secondary voids during ductile crack propagation
International Journal of Solids and Structures 51 (2014) pp. 839-847
DOI: 10.1016/j.ijsolstr.2013.11.012
405 KOZINOV, S., KUNA, M., ROTH, ST.
A cohesive zone model for the electromechanical damage of piezoelectric/ferroelectric
materials
Smart Materials and Structures 23 (2014) 055024 (13pp)
DOI: 10.1088/0964-1726/23/5/055024
404 KUNA, M., BÄCKER, D.
A PVDF sensor for the in-situ measurement of stress intensity factors during fatigue
crack growth
Procedia Materials Science 3 (2014) pp. 473-478
DOI: 10.1016/j.mspro.2014.06.079
Seite 21 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
403 LINSE, T. , KUNA, M., VIEHRIG, H.-W.
Quantification of brittle-ductile failure behavior of ferritic reactor pressure vessel steels
using the Small-Punch-Test and micromechanical damage models
Materials Science and Engineering A 614 (2014) pp. 136-147
DOI: 10.1016/j.msea.2014.05.095
402 NASSAUER, B., HESS, A., KUNA, M.
Numerical and experimental investigations of micromechanical processes during wire
sawing
International Journal of Solids and Structures 51 (2014) pp. 2656 -2665
DOI: 10.1016/j.ijsolstr.2014.03.040
401 PRÜGER, S., SEUPEL, A., KUNA, M.
A thermomechanically coupled material model for TRIP-steel
International Journal of Plasticity 55 (2014) pp. 182–197
DOI: 10.1016/j.ijplas.2013.10.005
400 RABOLD, F., KUNA, M.
Automated finite element simulation of fatigue crack growth in three-dimensional
structures with the software system ProCrack
Procedia Materials Science 3 (2014) pp. 1099–1104
20th European Conference on Fracture (ECF20)
DOI: 10.1016/j.mspro.2014.06.179
399 RASCHE, ST., STROBL, ST., KUNA, M., BERMEJO, R., LUBE, T.
Determination of Strength and Fracture Toughness of Small Ceramic Discs Using the
Small Punch Test and the Ball-on-three-balls Test
Procedia Materials Science 3 (2014) pp. 961–966
DOI: 10.1016/j.mspro.2014.06.156
398 ROTH, S., HÜTTER, G., KUNA, M.
Simulation of fatigue crack growth with a cyclic cohesive zone model
International Journal of Fracture 188 (2014) pp. 23-45
ISSN: 0376-9429
DOI: 10.1007/s10704-014-9942-8
397 ROTH, ST., KUNA, M.
Fatigue modelling with a cyclic cohesive zone approach
Procedia Materials Science 3 (2014) pp. 325–330
DOI: 10.1016/j.mspro.2014.06.056
396 SOLTYSIAK, S., ABENDROTH, M., KUNA, M., KLEMM, Y., BIERMANN, H.
Strength of fine grained carbon-bonded alumina (Al2O3-C) materials obtained by
means of the small punch test
Ceramics International (2014) pp. 9555-9561
DOI: 10.1016/j.ceramint.2014.02.030
Seite 22 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
395 SOLTYSIAK, S., SELENT, M., ROTH, S., ABENDROTH, M., HOFFMANN, M., BIERMANN, H.,
KUNA, M.
High-temperature small punch test for mechanical characterization of a nickel-base
superalloy
Materials Science and Engineering A 613 (2014) pp. 259–263
DOI: 10.1016/j.msea.2014.06.105
394 WANG, Y.-Z., KUNA, M.
General solutions of mechanical-electric-magnetic fields in magneto-electro-elastic
solid containing a moving anti-plane crack and a screw dislocation
ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte
Mathematik und Mechanik, 1 – 11 (2014)
DOI: 10.1002/zamm.201300279
393 WANG, Y.-Z., KUNA, M.
Screw dislocation in functionally graded magnetoelectroelastic solids
Philosophical Magazine Letters (2014) Vol. 94, No. 2, pp. 72–79
DOI: 10.1080/09500839.2013.861089
392 WANG, Y.-Z., KUNA, M.
Time-harmonic dynamic Green’s functions for two-dimensional functionally graded
magnetoelectroelastic materials
Journal of Applied Physics 115, 043518 (2014)
DOI: 10.1063/1.4862757
391 ZYBELL, L., HÜTTER, G., LINSE, T., MÜHLICH, U., KUNA, M.
Size effects in ductile failure of porous materials containing two populations of voids
European Journal of Mechanics - A/Solids (2014) pp. 8-19
DOI: 10.1016/j.euromechsol.2013.11.006
390 ZYBELL, L., SELENT, M., HÜBNER, P., KUNA, M.
Overload effects during fatigue crack growth in nodular cast iron-simulation with an
extended strip-yield model
Procedia Materials Science 3 ( 2014 ) pp. 221 – 226
20th European Conference on Fracture (ECF20)
DOI: 10.1016/j.mspro.2014.06.039
389 BÄCKER, D., KUNA, M. , HÄUSLER, C.
Measurement of Kirchhoff's stress intensity factors in bending plates
Proceeding SPIE 9061, Sensors and Smart Structures Technologies for Civil,
Mechanical, and Aerospace Systems 2014, 90611Q (2014)
DOI: 10.1117/12.2044472
388 HEIN, J., KUNA, M.
Thermoelastisches J-Integral für gradierte und temperaturabhängige Materialien
46. Tagung Arbeitskreis Bruchvorgänge
DVM-Bericht 246 (2014) pp. 43-52
Seite 23 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
387 HENKEL, S., ZYBELL, L., MOTTISCHKA, T., HAHN, P., BIERMANN, H., KUNA, M.
Einfluss von rissparalellen Zusatzbeanspruchungen und Überlasten auf das zyklische
Risswachstumsverhalten von duktilem Guseisen mit Kugelgraphit
46. Tagung Arbeitskreis Bruchvorgänge
DVM-Bericht 246 (2014) pp. 61-70
386 HENSL, T., MÜHLICH, U., BUDNITZKI, M., KUNA, M.
An eigenstrain approach to predict phase transformation and twinning in partially
stabilized zirconia (PSZ
EMMC14-European Mechanics of Materials Conference
Gothenburg, 27.-29.08.2014
385 HÜTTER, G., ZYBELL, L., KUNA, M.
Mirkomechanische Simulation der Rissausbreitung in Gusseisen mit Kugelgraphit im
gesamten spröd-duktilen Übergangsbereich
46. Tagung Arbeitskreis Bruchvorgänge
DVM-Bericht 246 (2014) pp. 177-186
384 KOZINOV, S,. ROTH, S., KUNA, M.
Development of a cohesive model for damage simulation in ferroelectric materials
subjected to electromechanical loading
11th World Congress on Computational Mechanics (WCCM XI),Ed. by Oñate E., Oliver
J. and Huerta A.; (2014) pp. 4320-4331
383 KOZINOV, S., KUNA, M., ROTH, ST.
Numerische Simulation der Rissinitiierung und des Risswachstums in piezoelektrischen
Stapelaktuatoren
46. Tagung Arbeitskreis Bruchvorgänge
DVM-Bericht 246 (2014) pp. 53-54
382 KUNA, M., NASSAUER, B.
Configurational forces concept for spatial crack configurations in ferroelectric materials
Proceedings of the second seminar on the mechanics of multifunctional materials
(2014) Bad Honnef, pp. 61-64
381 MENZER, M., KUNA, M.
Damage identification in two-dimensional structures using Lamb waves
Proceeding SPIE 9061, Sensors and Smart Structures Technologies for Civil,
Mechanical, and Aerospace Systems (2014)
DOI: 10.1117/12.2042770
380 ROTH, S., HÜTTER, G., KUNA, M.
FE-Simulation des Ermüdungsrisswachstums mithilfe eines zyklischen
Kohäsivgesetzes
46. Tagung Arbeitskreis Bruchvorgänge
DVM-Bericht 246 (2014) pp. 187-196
Seite 24 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
379 SELENT, M., SOLTYSIAK, S., ROTH, S., ABENDROTH, M., HOFFMANN, M., KUNA, M.
Mechanical Characterisation of a Thermally Sprayed Nickel-base Superalloy by Means
of the High Temperature Small Punch Test
3rd International Conference SSTT (Small Sample Test Techniques), 23.-25.09.2014,
Seggau, Austria
Conference Proceedings (2014) pp. 98-111
378 SOLTYSIAK, S., ABENDROTH, M., KUNA, M.
Determination of tension compression anisotropy of fine grained carbon bonded
alumina by means of the small punch test and the miniaturized compression test
In: Proceedings of the 3rd International Conference SSTT (2014)
23.-25.09.2014
Seggau (AUT)
ISBN: 978-80-260-6722-1
377 KUNA, M.
Finite Elements in Fracture Mechanics; Theory - Numerics – Applications
Series: Solid Mechanics and its Applications, Vol. 201
Springer (2013) Hardcover and eBook
ISBN 978-94-007-6680-8
Seite 25 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
2013
376 RABOLD, F., KUNA, M., LEIBELT, T.
PROCRACK: A Software for Simulating Three-Dimensional Fatigue Crack Growth
Advanced Finite Element Methods and Applications, Ed. T. Apel, O. Steinbach
Springer Verlag, Berlin-Heidelberg (2013) pp. 355-374
ISBN: 978-364230315-9
375 BÄCKER, D., HÄUSLER, CHR., KUNA, M.
Ein Sensorenkonzept zur In-situ-Rissüberwachung in plattenartigen Strukturen
Materialprüfung/Materials Testing 55 (2013) 11-12 pp. 830-840
374 HÜTTER, G., LINSE, T., MÜHLICH, U., KUNA, M.
Simulation of ductile crack initiation and propagation by means of a non-local Gurson-
model
International Journal of Solids and Structures 50 (2013) pp. 662-671
DOI: 10.1016/j.ijsolstr.2012.10.031
373 HÜTTER, G., ZYBELL, L., MÜHLICH, U., KUNA, M.
Consistent Simulation of Ductile Crack Propagation with Discrete 3D Voids
Computational Materials Science 80 (2013) pp. 61-70
DOI: 10.1016/j.commatsci.2013.04.013
372 LIEDKE, TH., KUNA, M.
Discrete element simulation of micromechanical removal processes during wire sawing
Wear 304 (2013) pp. 77–82
DOI: 10.1016/j.wear.2013.04.026
371 MEHLHORN, L. , MÜHLICH, U., KUNA, M.
A material model of particle size dependent transformation plasticity of psz ceramics
under thermomechanical loading
Advanced Engineering Materials 15, 7 (2013) pp. 638-645
DOI: 10.1002/adem.201200375
370 MÜHLICH, U. , ZYBELL, L., HÜTTER, G., KUNA, M.
A first-order strain gradient damage model for simulating quasi-brittle failure in porous
elastic solids
Archive of Applied Mechanics, 83, 6 (2013) pp. 955-967
ISSN: 0939-1533
DOI: 10.1007/s00419-013-0729-6
369 NASSAUER, B., KUNA, M.
Contact forces of polyhedral particles in discrete element method
Granular Matter Vol. 15 (2013) pp. 349-355
ISSN: 1434-5021
DOI: 10.1007/s10035-013-0417-9
Seite 26 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
368 NASSAUER, B., LIEDKE,T., KUNA,M.
Polyhedral particles for the discrete element method - Geometry representation contact
detection and particle generation
Granular Matter Vol. 15 (2013) pp. 85-93
ISSN: 1434-5021
DOI: 10.1007/s10035-012-0381-9
367 PRÜGER, S., MEHLHORN, L., MÜHLICH, U., KUNA, M.
Study of Reinforcing Mechanisms in TRIP-Matrix Composites under Compressive
Loading by Means of Micromechanical Simulations
Advanced Engineering Materials 15, 7 (2013) pp. 542-549
DOI: 10.1002/adem.201200323
366 SOLTYSIAK, S., ABENDROTH, M., KUNA, M., DUDCZIG, S.
Influence of the Cabores content on the toughness of carbon bonded alumina (Al2O3-
C)
Advanced Engineering Materials 15-12 (2013) pp.1231 -1234
DOI: 10.1002/adem.201300173
365 STORM, J., ABENDROTH, M., EMMEL, M., LIEDKE, TH., BALLASCHK, U., VOIGT, C., SIEBER,
T., KUNA, M.
Geometrical modelling of foam structures using implicit functions
International Journal of Solids and Structures 50, 3-4 (2013) pp. 548-555
DOI: 10.1016/j.ijsolstr.2012.10.026
364 STORM, J., ABENDROTH, M., ZHANG, D., KUNA, M.
Geometry dependent effective elastic properties of open-cell foams based on Kelvin
cell models
Advanced Engineering Materials 15, 12 (2013) pp. 1292–1298
DOI: 10.1002/adem.201300141
363 VOIGT, C., STORM, J., ANEZIRIS, C.G., ABENDROTH, M., KUNA, M., HUBALKOVA, J.
The influence of the measurement parameters on the crushing strength of reticulated
ceramic foams
Journal of Materials Research (2013) Vol. 28. Iss. 17
DOI: 10.1557/jmr.2013.96
362 BÄCKER, D., KUNA, M.
Alternative sensor design for monitoring fatigue crack growth
9th International Workshop on Direct and Inverse Problems in Piezoelectricity (2013)
Weimar
361 BÄCKER, D., KUNA, M. , HÄUSLER, C.
Piezoelectric sensor for in situ measurement of stress intensity factors
5. International Symposium on Piezocomposite Applications (2013) Dresden
360 GLOGER, D., ENDERLEIN, M., KUNA, M.
Error Analysis for Submodels with Cracks: Extension to Elastic-Plastic Material
Proceedings of the 3rd International Conference on Computational Modeling of
Fracture and Failure of Material and Structures
CFRAC, Praha (2013) p. 99
Seite 27 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
359 HÜTTER, G., LINSE, T., MÜHLICH, U., KUNA, M.
Integrated Damage Mechanics Approach to Brittle and Ductile Crack Propagation
Proceeding of the 13th International Conference on Fracture (2013) Beijing
358 HÜTTER, G., LINSE, T., MÜHLICH, U., KUNA, M.
Simulation der Rissausbreitung im gesamten spröd-duktilen Übergangsbereich
45. Tagung Arbeitskreis Bruchvorgänge
DVM-Bericht 245 (2013) pp. 49-58
357 KOCH, F., ENDERLEIN, M., KUNA, M., HÜBNER, P.
Residual stress analysis of in-service welded gas pipelines
Proceedings of the ASME 2013
Pressure Vessels & Piping Division Conference, PVP2013-97585 Paris, France,(July
14-18, 2013)
356 KUNA, M.
FEM-Techniken zur Rissanalyse im Rahmen der Elastisch-Plastischen Bruchmechanik
(EPBM)
Bruchmechanische Berechnungsmethoden (2013) Freiberg
DGM-Fortbildungsseminar
355 KUNA, M.
Rissspitzenbeanspruchung (K, J,CTOD)
Bruchmechanische Berechnungsmethoden (2013) Freiberg
DGM-Fortbildungsseminar
354 LINSE, T., KUNA, M.
Application of damage models to the ductile-brittle transition region of reactor steels
Proceeding of the 13th International Conference on Fracture (2013) Beijing
353 NASSAUER, B., KUNA, M.
A discrete element method for polyhedral particles
Proceedings of the III International Conference on Particle based Methods
Fundamentals and Applications (Particles 2013) Stuttgart, Germany
ISBN: 978-84-941531-8-1
352 NASSAUER, B., KUNA, M.
Discrete Element Simulation of Wire Sawing with Polyhedral Particles
Freiberger Forschungsforum, 1st Freiberg Sawing Symposium
June 13-14 (2013)
351 RABOLD, F., KUNA, M.
PROCRACK - A Software Tool for Finite Element Simulation of Three-Dimensional
Fatigue Crack Growth
Proceedings of the 3rd International Conference on Computational Modeling of
Fracture and Failure of Material and Structures
CFRAC, Praha (2013) p. 186
ISBN: 978-80-01-05279-2
Seite 28 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
350 ROTH, S., KUNA, M.
Finite Element Analyses of Fatigue Crack Growth Under Small Scale Yielding
Conditions Modelled with a Cyclic Cohesive Zone Approach
In: Onate, E., Owen, D.R.J., Peric, D. and Suarez, B. (eds.)
ISBN 978-84-941531-5-0
349 ROTH, ST., KUNA, M.
Modelling of Fatigue Crack Growth with a Cohesive Zone Model Approach Including a
Local Endurance Limit
Proceedings of the 3rd International Conference on Computational Modeling of
Fracture and Failure of Material and Structures
CFRAC, Praha (2013) p. 93
348 SELENT, M., ZYBELL, L., HÜBNER, P., KUNA, M.
Berechnung von Reihenfolgeeffekten in Gusseisen mit Kugelgraphit mit einem
erweiterten Fließstreifenmodell
45. Tagung Arbeitskreis Bruchvorgänge
DVM-Bericht 245 (2013) pp. 177-186
347 SOLTYSIAK, S., ABENDROTH, M., KUNA, M.
Influence of the Cabores content on the strength of carbon bonded alumina obtained
by means of Small Punch Test
Proceedings of the Unified International Technical Conference on Refractories
Unitecr 2013, (eds D. G. Goski and J. D. Smith), John Wiley &Sons, Inc., Hoboken,
NJ, USA, September 10-13 (2013) pp. 135-140
Victoria (Canada)
DOI 10.1002/9781118837009.ch24
346 SOLTYSIAK, S., ABENDROTH, M., KUNA, M., DUDCZIG, S.
Influence of the microstructure on the fracture behavior of carbon bonded alumina
Key Engineering Materials, Special Issue, Proceedings of MSMF7, 01-03 July 2013
592-593 (2014) pp. 279-282
Brno (Czech Republik)
DOI 10.4028/www.scientific.net/KEM.592-593.279
345 STORM, J., ABENDROTH, M., KUNA, M.
Geometry dependent effective heat conductivity of open-cell foams based on Kelvin
cell models
Unitecr (2013) Conference Proceedings
Victora, BC, Canada
344 ZYBELL, L., HÜTTER, G., MÜHLICH, U., KUNA, M.
Mikromechanische Simulation der duktilen Rissinitiierung in Gusseisen mit
Kugelgraphit
45. Tagung Arbeitskreis Bruchvorgänge
DVM-Bericht 245 (2013) pp. 243-252
Seite 29 / 77
Publikationen MKuna1972-032022Prof. Dr. rer. nat. habil. Meinhard Kuna
Stand: 31.03.2022
Liste der Publikationen
343 ZYBELL, L., SELENT, M., HÜBNER, P., KUNA, M.
An extended strip yield model for the calculation of overload effects during fatigue
crack growth in nodular cast iron
Proceedings of the Thirteenth International ASTM/ESIS
Symposium on Fatigue and Fracture Mechanics (2013)
Jacksonville, Florida
Seite 30 / 77
Publikationen MKuna1972-032022You can also read
