Mini Hi-Fi Audio OWNER'S MANUAL - Please read this manual carefully before operating your set and retain it for future reference - Geizhals ...
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
OWNER’S MANUAL
Mini Hi-Fi
Audio
Please read this manual carefully before operating your set and retain it for future
reference.
MODEL
ON5
MFL71664326 www.lg.com
2004_Rev02 Copyright © 2020 LG Electronics Inc. All Rights Reserved.2 Getting Started
Safety Information
1 CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Getting Started
CAUTION: TO REDUCE THE RISK OF ELECTRIC CAUTION: This product employs a Laser System.
SHOCK DO NOT REMOVE COVER (OR BACK) To ensure proper use of this product, please read
NO USER-SERVICEABLE PARTS INSIDE REFER this owner’s manual carefully and retain it for future
SERVICING TO QUALIFIED SERVICE PERSONNEL. reference. Shall the unit require maintenance, contact
an authorized service center.
This lightning flash with arrowhead Use of controls, adjustments or the performance of
symbol within an equilateral procedures other than those specified herein may
triangle is intended to alert the result in hazardous radiation exposure. To prevent
user to the presence of uninsulated direct exposure to laser beam, do not try to open the
dangerous voltage within the enclosure.
product’s enclosure that may be of CAUTION: Do not block any ventilation openings.
sufficient magnitude to constitute Install in accordance with the manufacturer’s
a risk of electric shock to persons. instructions.
The exclamation point within an Slots and openings in the cabinet are provided
equilateral triangle is intended for ventilation and to ensure reliable operation of
to alert the user to the presence the product and to protect it from over heating.
of important operating and The openings should never be blocked by placing
maintenance (servicing) the product on a bed, sofa, rug or other similar
instructions in the literature surface. This product shall not be placed in a built-
accompanying the product. in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK instruction has been adhered to.
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN NOTICE: For safety marking information including
OR MOISTURE. product identification and supply ratings, please refer
CAUTION: The apparatus should not be exposed to to the main label on the bottom or the other surface
water (dripping or splashing) and no objects filled of the product.
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.Getting Started 3
CAUTION concerning the Power Cord CAUTION: No naked flame sources, such as lighted
The Power Plug is the disconnecting device. In case candles, should be placed on the apparatus.
of an emergency, the Power Plug must remain readily
Symbols
accessible.
1
Check the specification page of this owner’s manual ~ Refers to alternating current (AC).
to be certain of the current requirements.
Getting Started
Do not overload wall outlets. Overloaded wall outlets, 0 Refers to direct current (DC).
loose or damaged wall outlets, extension cords,
Refers to class II equipment.
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions 1 Refers to stand-by.
could result in electric shock or fire. Periodically
examine the cord of your device, and if its appearance ! Refers to “ON” (power).
indicates damage or deterioration, unplug it,
discontinue use of the device, and have the cord Refers to dangerous voltage.
replaced with an exact replacement part by an
authorized service center. Protect the power cord
from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the device.
CAUTION: Be careful to make sure children do not
put their hands or any objects into the *speaker duct.
* speaker duct: A hole for plentiful bass sound on
speaker cabinet. (enclosure)4 Table of Contents
Table of Contents
1 Getting Started 3 Operating
2 Safety Information 16 Basic Operations
6 Unique Features 16 – CD/USB Operations
7 Playable file Requirement 16 – Auto Play
7 – Music file requirement 17 – Selecting a folder and an MP3/WMA file
7 – Compatible USB Devices 18 – Deleting a file/folder or format
7 – USB device requirement 19 Playback Effect
8 Remote control 19 – AUTO DJ
10 Top panel 19 – DJ PAD
12 Front panel / Rear panel 20 Using BLUETOOTH® wireless technology
20 – Listening to music stored on the Bluetooth
devices
2 Connecting 23 Using the LG XBOOM App
14 AC Power Cord Connection 23 – About “LG XBOOM” App
15 Optional Equipment Connection 23 – Install “LG XBOOM” App onto Your
15 – USB Connection Bluetooth Device
15 – Antenna Connection 24 – Activate Bluetooth with “LG XBOOM” App
25 Radio Operations
25 – Listening to the radio
25 – Improving poor FM reception
25 – Presetting the Radio Stations
25 – Deleting all the saved stations
26 – Seeing information about a Radio station
26 – Listening to the DAB+
26 – DAB+ scan
27 Sound adjustment
27 – Setting the sound mode
27 – Setting the USER EQ
28 Advanced Operations
28 – Recording to USB
30 – JUKEBOX PlaybackTable of Contents 5
1
4 Troubleshooting
31 Other Operations 42 Troubleshooting
31 – Turn off the sound temporarily 42 – General
31 – CHILDSAFE Mode 43 – NOTES to release Demo mode
32 – DEMO
2
32 – Resume stop
33 – Using Guitar 5 Appendix
33 – Using Microphone 44 General specifications
36 – LIGHTING 45 Trademarks and licenses 3
36 – Sleep Timer Setting 46 Maintenance
36 – Dimmer 46 – Notes on Discs
37 – Auto power down 46 – Handling the Unit
37 – AUTO POWER On
38 – Auto function change 4
39 Setting the Clock
39 – Setting the Clock through “LG XBOOM” App
39 – Using your unit as an alarm clock
40 LG Sound Sync
41 WIRELESS PARTY LINK Connection 56 Getting Started
Unique Features
BLUETOOTH®
1
Listens to music stored on your Bluetooth device.
Getting Started
Playback effects
Listens to music with various sound and playback
effects.
USB Direct Recording
Records music to your USB device.
LG XBOOM
LG XBOOM is an app designed to let you take
control of some of LG’s latest audio devices. (Page
23-24 )
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.Getting Started 7
Playable file Compatible USB Devices
yy MP3 Player: Flash type MP3 player.
Requirement yy USB Flash Drive:
Devices that support USB2.0 or USB1.1. 1
yy The USB function of this unit does not support all
Music file requirement
Getting Started
USB devices.
MP3/WMA file compatibility with this unit is limited
as follows.
USB device requirement
yy Sampling frequency: within 32 to 48 kHz (MP3),
yy Devices which require additional program
within 32 to 48 kHz (WMA)
installation when you have connected it to a
yy Bit rate: within 32 to 320 kbps (MP3), computer, are not supported.
40 to 192 kbps (WMA)
yy Do not extract the USB device while in operation.
yy Maximum files: Data CD: 999 / USB: 2,000
yy For a large capacity USB, it may take longer than a
yy Maximum folders: Data CD: 99 / USB: 200 few minute to be searched.
yy File extensions: “.mp3”/ “.wma” yy To prevent data loss, back up all data.
yy Certain MP3/WMA files may not be played yy If you use a USB extension cable or USB hub, the
depending on the type or format of the file. USB device is not recognized.
yy CD-ROM file format: ISO 9660/ JOLIET yy Using NTFS file system is not supported. (Only
yy We recommend that you use Easy-CD Creator, FAT(16/ 32) file system is supported.)
which creates an ISO 9660 file system. yy This unit recognizes up to 2,000 files.
yy A protected file by DRM (Digital rights yy External HDD, Card readers, Locked devices, or
management) cannot be played on the unit. hard type USB devices are not supported.
yy The DTS disc is not supported. yy USB port of the unit cannot be connected to PC.
You have to set the disc format option to [Mastered] The unit cannot be used as a storage device.
in order to make the discs compatible with the LG yy Some USB may not work with this unit.
players when formatting rewritable discs. When
setting the option to Live File System, you cannot use
it on LG players.
(Mastered/Live File System: Disc format system for
Windows Vista)8 Getting Started
Remote control • • • • • • • • • • • • • • a• • • • • • • • • • • • • •
1 (Standby): Turns the power on or off.
B (Open/Close): Opens and closes the disc tray.
1 VOL (Volume) +/-: Adjusts speaker volume.
F (Function): Selects the function and input source.
Getting Started
Input source / Function Display
Disc CD
USB USB1 / USB2
Bluetooth BT
LG Sound Sync (Wireless) LG TV
Radio FM
DAB+ DAB+
[ (Mute): Mutes the sound.
PRESET·FOLDER W/S:
-- Chooses a preset number for a radio station.
(Page 25)
-- Searches for a folder of MP3/WMA files. When
a CD/USB containing MP3/WMA files in several
folders is being played, press PRESET·FOLDER
W/S to select the folder you want to play.
JUKEBOX/MEMORY:
-- Stores radio stations. (Page 25)
-- Selects JUKEBOX mode. (Page 30)
-- Makes JUKEBOX list.
AUTO DJ: Selects the AUTO DJ mode. (Page 19)
DELETE:
-- Deletes MP3/WMA files. (USB only). (Page 18)
Replacement of battery -- Deletes a song on the JUKEBOX list.
-- Deletes all the saved stations.
)
(R03
(R03)
Remove the battery cover on the rear of the remote
control, and insert the battery with 4 and 5
matched correctly.
Risk of fire or explosion if the battery is replaced by
an incorrect type.Getting Started 9
• • • • • • • • • • • • • • b• • • • • • • • • • • • • • • • • • • • • • • • • • • • c• • • • • • • • • • • • • •
REPEAT: Listens to your tracks/files repeatedly or 0 to 9 numerical buttons: Selects numbered tracks,
randomly. files, or preset number.
TUNING-/+: CLOCK: Sets a clock and checks a time.
1
-- Selects the radio stations. ALARM: With the ALARM function you can turn on
Getting Started
-- Scans DAB+ stations by pressing and holding. CD, USB play and tuner reception at a desired time.
C/V (Skip/Search): • • • • • • • • • • • • • • d• • • • • • • • • • • • • •
-- Skips backward or forward. VOICE CANCELLER: You can reduce the vocal tones
-- Searches for a section within a track/file. during music playback from various input sources.
N (Play/Pause): SLEEP: Sets the system to turn off automatically at
a specified time.
-- Starts or pauses playback.
(Dimmer: The display window will be darkened by
-- Selects stereo/mono. half.)
-- Bluetooth connection lock (BT LOCK): Select the DAB+ MODE :
Bluetooth function by pressing F repeatedly. And
-- DAB+ radio type
long press N to limit Bluetooth connection to
only BT and LG TV. -- Selects a DAB+ display mode.
Z (Stop): RDS/SET :
-- Stops playback. -- RDS (Radio Data System)
-- Cancels DELETE function. -- Confirms the setting.
EQUALIZER: Chooses sound impressions. KEY CHANGER (L/l): Changes the key to suit your
vocal range.
SPECIAL EQ: Chooses special equalizer.
MIC (Microphone) ECHO: Selects ECHO mode.
J (Information):
PTY : Searches radio stations by radio type. (RDS
-- Sees information about your music. An MP3 file
only)
often come with ID3 tag. The tag gives the Title,
Artist, Album or Time information. VOCAL EFFECTS: Selects various vocal effects
mode.
-- Sees Bluetooth device name of the unit in BT
READY. USB REC:
-- Sees the name of connected all Bluetooth device -- Records to USB.
in Bluetooth mode. -- Stops recording.
-- When these units are successfully connected each
other in WIRELESS PARTY LINK mode, each of
connected device names appears in the each unit.10 Getting Started
Top panel
1 d e
c
Getting Started
b f
g
a h
o n m l k j i
a 1 (Standby) f F (Function)
Turns the power on or off. Selects the function and input source.
b USB REC / DEMO Input source / Function Display
- Records to USB. Disc CD
- Stops recording. USB USB1 / USB2
- In power off status, if you press USB REC /
DEMO, show demo mode. Bluetooth BT
LG Sound Sync (Wireless) LG TV
c USB 1 Port
You can play sound files by connecting the USB Radio FM
device. DAB+ DAB+
d Display window
e USB 2 Port
You can play sound files by connecting the USB
device.Getting Started 11
g LIGHTING n Remote sensor
Selects the lighting mode. o SPECIAL EQ / BASS BLAST (or BASS BLAST+)
h 3TWIN - Chooses special equalizer.
Connects two units for TWIN mode in WIRELESS - Press and hold to select BASS (or BASS+)
PARTY LINK. effect directly. 1
i C/V (Skip/Search) SEARCH
Getting Started
- Skips backward or forward. Moves to folder or file in selection mode.
- Searches for a section within a track/file. OK
- Selects the radio stations. Selects a folder when searching a file.
- Scans DAB+ stations by pressing and holding.
USER EQ
N (Play/Pause) Selects the equalizer created by your own.
- Starts or pauses playback.
Multi jog
- Selects stereo/mono.
- Bluetooth connection lock (BT LOCK): - Searches a folder or a file.
Select the Bluetooth function by pressing - Turns clockwise or counterclockwise to control
F repeatedly. And long press N to limit the USER EQ level.
Bluetooth connection to only BT and LG TV. - Chooses special equalizer.
Z (Stop) / RDS
- Stops playback or cancels DELETE function.
- Radio Data System
VOL (Volume) -/+
Adjusts speaker volume.
MIC (Microphone) / GUITAR -/+
Adjusts Microphone volume or Guitar volume.
j (Auto Music Play)
Plays the audio currently playing by tagging the
mobile (with “LG XBOOM” App) to this unit.
(Android Only)
k VOICE CANCELLER
You can reduce the vocal tones during music
playback from various input sources.
B (Open/Close)
Opens and closes the disc tray.
l CLUB, DRUM, USER (DJ PAD)
Selects CLUB, DRUM or USER sound effect to
mix.
(If you want to use USER, you have to register a
source with “LG XBOOM” app.(Android Only))
1, 2, 3 (DJ PAD)
Press a desired sound pad.
m MIC (Microphone) ECHO
Selects ECHO mode.
VOCAL EFFECTS
Selects various vocal effects mode.
KEY CHANGER (l/L)
Changes the key to suit your vocal range.12 Getting Started
Front panel / Rear panel
1
Getting Started
a
d e f
b
c
g
a Disc tray d GUITAR IN: Connect a guitar.
b Lighting e MIC (Microphone) IN: Connect a microphone.
c Remote sensor f DAB+/FM ANTENNA
>>Caution g AC IN socket
Place the unit at a safe distance from the
child’s reach. Otherwise it may result in the unit
>>Caution
yy Connect the power cord to wall outlet
falling down and causing personal injury and/or directly if possible. Or when you use an
property damage. extension cable, it is highly recommended
to use an extension cable of 110 V / 15 A
or 230 V / 15 A, otherwise the unit may
not operate properly because of the lack of
power supply.
yy Do not overload the extension cord with
excessive electrical load.Getting Started 13
Useful functions for using the unit
Function Description To do Do this
BT Lock On/Off It allows you to connect a ON Press and hold N for 5 seconds in BT
(Page 22) Bluetooth device only on (Bluetooth) function. 1
BT (Bluetooth) and LG TV OFF Press and hold N for 5 seconds in BT
Getting Started
functions. (Bluetooth) function.
Initial setting of this function
was set to off.
Auto Power On It allows the unit to turn on ON Turn off the unit by pressing 1 on the unit
(Page 37) automatically by input signals: for 5 seconds.
LG TV or BT (Bluetooth) OFF Turn off the unit by pressing 1 on the unit
for 5 seconds.14 Connecting
AC Power Cord
Connection
1. Connect one end of the AC power cord (included)
to the AC IN socket.
2
Connecting
2. Plug the other end into the wall outlet.
,,Note
Unplug the AC power cord from the wall outlet
if you do not use for an extended period of time.Connecting 15
Optional Equipment Antenna Connection
Connection Connect the supplied antenna for listening to the
radio.
USB Connection
Connect a USB device (or MP3 player, etc.) to the
USB ports on the unit.
USB device
2
Connecting
Antenna
,,Note
yy Be sure to fully extend the antenna.
yy When moving the unit to other areas : Delete
all of the saved DAB+ scanned stations.
,,Note
Removing the USB device from the unit:
1. Choose a different function/mode or
press Z twice in a row.
2. Remove the USB device from the unit.16 Operating
Basic Operations ,,Note
yy Repeat/Shuffle playback operates as follows.
On Display Description
CD/USB Operations Plays songs in order, and stops
1. Insert the disc by pressing B. OFF
the playback.
Or connect the USB device to the USB port.
ONE Plays a same song repeatedly.
2. Select CD or USB function by pressing F.
Plays songs in a folder
FOLDER
repeatedly. (Except AUDIO CD)
To Do this
Stop Press Z. ALL Plays all the songs repeatedly.
Playback Press N. Plays all the songs once
Pause Press N during playback. SHUFFLE randomly, and stops the
playback.
Searching for a Press and hold C/V during
3 section within playback and release it at the point yy When you play JUKEBOX list, only ONE and
a track/file you want to listen to. ALL are available.
Operating
Selecting Press 0 to 9 numerical buttons on yy Even after restarting the unit or switching
a track/file the remote control to go to the one function to another, you can listen to
directly desired file or track directly. music from the point where it’s last been
-- In stop status, played.
Press C/V to go to the next/ yy If you leave the disc tray open for 5 minutes,
previous track/file. it will close automatically.
-- During playback,
(1) By using C/V buttons:
Skipping to the
Press V to go to the next track/ Auto Play
file. -- AUDIO/MP3/WMA CD is played automatically
next/previous
track/file Playing in less than 3 seconds, press after disc tray is open and then closed.
C to go to the previous track/file. -- Automatically switches to the CD function if disc
Playing after 3 seconds, press C to tray is open and then closed even when there is no
go to the beginning of the track/file. disc in disc tray.
(2) By using SEARCH:
Rotate Multi jog or C/V and
press N to play the track/ file.
Playing Press REPEAT on the remote
repeatedly or control repeatedly. Refer to the note
randomly for details about the display change.Operating 17
Selecting a folder and ,,Note
an MP3/WMA file yy CD / USB Folders/Files are recognized as
below.
On the unit
1. Press SEARCH and rotate Multi Jog or C/V *
until a desired file appears. You can also search a
folder if you press SEARCH again.
2. Press OK or N to play the selected file. When
you search a folder, press OK to select a file in the
folder, then press OK or N again. The selected
file is played.
On the remote control
1. Press PRESET·FOLDER W/S repeatedly until a
desired folder appears.
2. Select the file you want by using C/V. 3
3. Press N to play it.
Operating
yy If there is no file in a folder, the folder will not
appear.
yy Folders will be presented as the following
order;
ROOT FOLDER 1 FOLDER 3
FOLDER 7 FOLDER 8 FOLDER 5
FOLDER 6
yy File will be played from $ file No.1 to $ file
No.14 one by one.
yy Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
*ROOT: The first screen you can see when a
computer recognize the CD/USB is “ROOT”.18 Operating
Deleting a file/folder or format
You can delete file, folder on your USB or format the
USB.
1. Select USB function by pressing F.
2. Press DELETE on the remote control repeatedly,
the display changes as followings.
DEL FILE DEL DIR FORMAT
On Display Description
DEL FILE Select the file you want to delete.
Select the folder you want to
DEL DIR
delete.
FORMAT Select to format the USB device.
3 If you want to exit the current mode, press Z.
Operating
3. To delete file/folder or format, press and hold
DELETE on the remote control.
>>Caution
yy Do not extract the USB device during
operation. (play, delete, etc.)
yy Regular back up is recommended to prevent
data loss.
yy The delete function may not be supported
according to the USB status. (lock, etc.)Operating 19
Playback Effect DJ PAD
It allows you to mix CLUB, DRUM or USER sound
The unit supports various sound and playback effect. Each mode has up to 3 sounds effect.
effects: AUTO DJ, DJ PAD.
1. Press and hold DJ PAD (CLUB, DRUM or USER)
on the unit to select a desired DJ PAD sound
AUTO DJ effect.
Auto DJ blends the end of one song into the 2. Press a DJ PAD (1, 2, 3) of desired sound on the
beginning of another for seamless playback. unit.
It equalizes volume across tracks/files for
uninterrupted playback. ,,Note
Press AUTO DJ on the remote control repeatedly, the yy If you want to use USER, you have to register
display changes as followings. a source with “LG XBOOM” app.(Android
Only)
SHUFFLE SEQUENTIAL OFF If the source is not register to USER, “EMPTY”
On Display Description or “NO SOUND” appears on the display 3
window.
Operating
OFF -
yy Initial DJ PAD mode is CLUB sound effect.
The music is played randomly on yy DJ PAD mode is displayed for 3 seconds
SHUFFLE
this mode. when you press DJ PAD (CLUB, DRUM or
The music is played repeatedly on USER) on the unit.
SEQUENTIAL
this mode. yy The DJ PAD sound is mixed when you press a
DJ PAD (1, 2, 3) on the unit.
,,Note yy The currently playing DJ PAD sound is
yy AUTO DJ mode does not support searching stopped and the selected DJ PAD sound
for a section within a track/file or to play outputs if you press a different DJ PAD (1, 2,
repeatedly or randomly. 3) on the unit while DJ PAD sound is playing.
yy If you move to other functions or stop the
music using Z on AUTO DJ mode, AUTO DJ
will be disabled.
yy AUTO DJ is not supported in the music file
whose length is less than 60 seconds.
yy Only SEQUENTIAL is selected when played
JUKEBOX list.20 Operating
Using BLUETOOTH® Listening to music stored on the
Bluetooth devices
wireless technology
Pairing your unit and Bluetooth device
Before you start the pairing procedure, make
About Bluetooth sure the Bluetooth feature is activated on your
Bluetooth is wireless communication technology for Bluetooth device. Refer to your Bluetooth device’s
short range connection. user guide. Once a pairing operation is performed, it
does not need to be performed again.
The sound may be interrupted when the connection
interfered by the other electronic wave or you 1. Turn on the unit.
connect the Bluetooth in the other rooms.
Connecting individual devices under Bluetooth
,,Note
When Bluetooth connection lock is activated,
wireless technology does not incur any charges.
you can search Bluetooth device in BT function.
A mobile phone with Bluetooth wireless technology
3 can be operated via the Cascade if the connection
was made via Bluetooth wireless technology. 2. Operate the Bluetooth device and perform the
Operating
pairing operation. When searching for this unit
yy Available Devices: Smart phone, MP3, Notebook,
with the Bluetooth device, a list of the devices
etc.
found may appear in the Bluetooth device display
yy Version: 4.0 depending on the type of Bluetooth device. Your
yy Codec: SBC, AAC unit appears as “LG ON5 (XX)”.
Bluetooth Profiles ,,Note
yy XX means the last two digits of
In order to use Bluetooth wireless technology, Bluetooth address. For example, if your
devices must be able to interpret certain profiles. unit has a Bluetooth address such as
This unit is compatible with following profile. 9C:02:98:4A:F7:08, you will see
A2DP (Advanced Audio Distribution Profile) “LG ON5 (08)” on your Bluetooth device.
yy Depending on the Bluetooth device type,
some devices have a different pairing way. For
details about Bluetooth pairing, refer to your
Bluetooth device manual.
yy You can connect this unit with up to 3
Bluetooth devices simultaneously using the
same method as described above, only in the
Bluetooth function.
yy The multi phone pairing connection is only
supported on Android devices. (Multi phone
pairing connection may not be supported
depending on the connected device
specifications.)
yy Removable/detachable Bluetooth devices
(Ex: Dongle etc.) will not support multi phone
pairing.Operating 21
3. When this unit is successfully connected with
your Bluetooth device, “PAIRED” appears on the
,,Note
yy The sound may be interrupted when the
display window and change to Bluetooth device connection has interference from other
name soon. Then “BT” will appear on the display electronic devices.
window. yy Depending on the type of the device, you may
,,Note not be able to use the Bluetooth function.
yy “PAIRED” will momentarily appear on the yy You can enjoy wireless system using phone,
display when you connect other devices for MP3, Notebook, etc.
multi phone pairing.
yy The more distance between the unit and the
yy If the device name is unavailable, “_” will be Bluetooth device, the lower the sound quality
displayed. becomes.
yy Bluetooth connection will be disconnected
4. Listen to music. when the unit is turned off or the Bluetooth
To play a music stored on your Bluetooth device, device gets too far from the unit.
refer to your Bluetooth device’s user guide. yy When Bluetooth connection is disconnected, 3
,,Note connect the Bluetooth device to the unit
Operating
yy When using Bluetooth technology, you have again.
to make a connection between the unit and yy When a Bluetooth device is not connected,
the Bluetooth device as close as possible and “BT READY” appears on the display window.
keep the distance.
yy When you use the Bluetooth function,
However, it may not work well in certain
adjust the volume to a proper level on the
situations as described below:
Bluetooth device.
-- There is a obstacle between the unit and
yy When you connect Bluetooth device (iOS
the Bluetooth device.
device etc.) to this unit or operate the device,
-- There is a device using same frequency the volume level can be synchronized with
with Bluetooth technology such as a each other.
medical equipment, a microwave or a
yy Bluetooth connection will be disconnected
wireless LAN device.
when you change the Bluetooth function
yy If Bluetooth connection does not work well, to some other function. In “LG XBOOM” app
try pairing it again. connection, only one device which you are
yy Even if this unit is connected to up to 3 playing keeps Bluetooth connection. You can
Bluetooth devices in the Bluetooth mode, control the Bluetooth device with this unit
you can play and control music by using only but you cannot use sound output.
one of the connected devices. yy When entering the Bluetooth function,
this unit automatically connects to the last
connected Bluetooth device or the device
which played back last.
(Auto connection may not be supported
depending on the connected device
specifications.)22 Operating
Controls connected Bluetooth device
You can control connected Bluetooth device by the
unit; play, pause, stop, skip.
,,Note
yy Only Android OS and iOS is available to use
this function.
yy This function may not be supported
depending on the Bluetooth device, or
operated differently.
Bluetooth connection lock (BT LOCK)
You can limit Bluetooth connection to only
3 BT (Bluetooth) and LG TV function to prevent
unintended Bluetooth connections.
Operating
To turn this function on, press and hold N for about
5 seconds in BT (Bluetooth) function.
“ON-BT LOCK” appears then you can limit Bluetooth
connection.
To turn this function off, press and hold N for about
5 seconds in BT (Bluetooth) function.
“OFF-BT LOCK” appears.
,,Note
yy Even if you set up Bluetooth connection
lock to On, this unit turns on by Auto Power
function. Turn off Auto Power function to
prevent it. (Page 37)
yy When you turn on or off the Bluetooth
connection lock, search and connect again
using Bluetooth after deleting the paired list
of your Bluetooth device.
yy When you turn on the Bluetooth connection
lock, multi phone pairing is not supported.Operating 23
Using the LG XBOOM Install “LG XBOOM” App onto
Your Bluetooth Device
App There are two ways to install “LG XBOOM” App onto
Your Bluetooth Device.
,,Note
It is recommended to use the latest version of Install “LG XBOOM” App through QR
app. code
1. Install “LG XBOOM” app through QR code. Use
the scanning software to scan the QR code.
About “LG XBOOM” App
“LG XBOOM” app brings a suite of new features to
this unit.
To enjoy more features, you are recommended to
download and install free “LG XBOOM” app. 3
Operating
2. Tap an icon for installation.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device
has a scanning software application. If you
don’t have one, download one from “Google
Android Market (Google Play Store)” or
“Apple App Store”.
yy Depending on the area, QR code may not
work.
yy You can find the available application of this
unit by using “LG Audio” app. (Android Only)
-- Android O/S: Ver 5.0 (or later)24 Operating
Install “LG XBOOM” App through Activate Bluetooth with “LG
“Google Android Market (Google Play XBOOM” App
Store)” or “Apple App Store” “LG XBOOM” app helps to connect your Bluetooth
1. Tap the “Google Android Market (Google Play device to this unit.
Store)” or “Apple App Store” icon. Tap “LG XBOOM” app icon on the home screen to
2. In the search bar, type in the “LG XBOOM” and open “LG XBOOM” app, and go to the main menu.
search it.
3. In the search result list, find and tap “LG XBOOM” ,,Note
to start downloading Bluetooth app. yy “LG XBOOM” app will be available in the
software version as follow;
,,Note -- Android O/S: Ver 5.0 (or later)
yy Make sure that your Bluetooth device is
-- iOS O/S: iOS10 (or later)
connected to the Internet.
yy If you use “LG XBOOM” app for operation,
yy Make sure that your Bluetooth device is
3 there would be some differences between
equipped with “Google Android Market
“LG XBOOM” app and the supplied remote
(Google Play Store)” or “Apple App Store”.
control. Use the supplied remote control as
Operating
necessary.
yy Depending on the Bluetooth device, “LG
XBOOM” app may not work.
yy After connection of “LG XBOOM” app, music
may be output from your Bluetooth device. In
this case, try connecting procedure again.
yy If you operate the other applications or
change the settings on your Bluetooth
device while using “LG XBOOM” app, “LG
XBOOM” app may operate abnormally.
yy When “LG XBOOM” app operates abnormally,
check your Bluetooth device and the
connection of “LG XBOOM” app and then try
to connect again.
yy Depending on the smart phone's operating
system, you have some differences for “LG
XBOOM” operation.
yy Check Bluetooth setting on your Bluetooth
device if “LG XBOOM” app connection does
not work well.Operating 25
Radio Operations Presetting the Radio Stations
You can preset 50 stations each for FM/DAB+.
Be sure that the antenna is connected. (Page 15) Before tuning, make sure to turn down the volume.
1. Press F until FM/DAB+ appears in the display
Listening to the radio window.
1. Press F until FM/DAB+ appears in the display 2. [FM]
window. Select the desired frequency by pressing
The last received station is tuned in. TUNING -/+ on the remote control or C/V
on the unit.
2. [FM]
Auto tuning: [DAB+]
Press and hold TUNING-/+ on the remote Select the desired station by pressing TUNING
control or C/V on the unit until the frequency -/+ on the remote control or C/V on the unit.
indication starts to change, then release. 3. Press JUKEBOX/MEMORY on the remote
Scanning stops when the unit tunes in a station. control. A preset number will blink in the display 3
Or window.
Operating
Manual tuning: 4. Press PRESET·FOLDER W/S on the remote
Press TUNING-/+ on the remote control or control to select the preset number you want.
C/V on the unit repeatedly. 5. Press JUKEBOX/MEMORY on the remote
control. The station is stored.
[DAB+] 6. Repeat steps 2 to 5 to store other stations.
Manual tuning : Press TUNING-/+ on the remote 7. To listen a preset station, press
control or C/V on the unit repeatedly when PRESET·FOLDER W/S or 0 to 9 numerical
the scanning is done. buttons on the remote control.
3. Adjust the volume by pressing VOL +/-
repeatedly. Deleting all the saved stations
,,Note 1. Press DELETE on the remote control.
When you change function to DAB+ for the first “DEL ALL” will flash up on the display window
time, this unit scans station automatically. 2. Press DELETE on the remote control to erase all
the saved radio stations.
“DELETED ALL” will scroll on the display window.
Improving poor FM reception
Press N. This will change the tuner from stereo to
mono and usually improve the reception.26 Operating
Seeing information about a Listening to the DAB+
Radio station You can change the display information of the
currently broadcasting DAB+ channel.
The FM tuner is supplied with the RDS (Radio Data
Press DAB+ MODE on the remote control
System) facility. This shows information about the
repeatedly, the display changes in the following order;
radio station being listened to. Press RDS/SET on
the remote control repeatedly to cycle through the SERVICE PTY NAME FREQ DLS
various data types: ENSEMBLE
The initials of the service name are displayed.
PS (Programme Service Name)
The name of the channel will appear in SERVICE Displays the Name of the
the display. channel for the current
broadcast.
PTY (Programme Type Recognition)
PTY NAME Displays the Type of the channel
The programme type (e.g. Jazz or News)
3 for the current broadcast.
will appear in the display.
FREQ Displays the frequency of
Operating
RT (Radio Text) the channel for the current
broadcast.
A text message contains special
information from the broadcast station. DLS It displays the current Scroll of
the channel which is selected.
This text may scroll across the display.
ENSEMBLE Displays the Ensemble of
CT (Time controlled by the channel) the channel for the current
This shows the time as broadcast by the broadcast.
station.
DAB+ scan
You can search the radio stations by programme type Press and hold TUNING-/+ on the remote control
by pressing RDS/SET on the remote control. The or C/V on the unit, all of DAB+ service list and
display will show the last PTY in use. Press PTY one saved preset DAB+ stations will be deleted and scan
or more times to select your preferred programme DAB+ service. Then press it again, scanning will be
type. Press and hold C/V. The tuner will search cancelled.
automatically. When a station is found the search
will stop.Operating 27
Sound adjustment You can select a desired sound mode by using
SPECIAL EQ on the remote control or SPECIAL EQ /
BASS BLAST (or BASS BLAST+) on the unit.
Setting the sound mode On Display Region Description
This system has a number of pre-set equalizers. The
displayed items for the equalizer may be different FUNK, REGUETON,
depending on sound sources and effects. SAMBA,
Latin
You can select a desired sound mode by using MERENGUE, AXE,
America
EQUALIZER on the remote control. SALSA, SERTANEJ,
FORRO Optimized
equalizer
On Display Description for the
ARABIC Middle East music genre
BASS (BASS BLAST) preferred in
Reinforces the bass
or DANGDUT Indonesia each region.
BASS+ (BASS BLAST+)
and powerful sound. 3
AFRO Africa
Operating
This program lends
an enthusiastic
POP INDIA India
atmosphere to the
CLASSIC
sound, giving you the
ROCK
JAZZ
feeling you are at an
actual rock, pop, jazz or
,,Note
By pressing and holding SPECIAL EQ / BASS
classic concert. BLAST (or BASS BLAST+) on the unit for 3
You can enjoy the seconds, you can directly select BASS (BASS
FOOTBALL equalizer FOOTBALL BLAST) or BASS+ (BASS BLAST+) effect.
STADIUM.
You can enjoy
STANDARD
optimized sound. Setting the USER EQ
You can adjust the sound level of Bass, Middle and
Treble as your preference.
1. Press USER EQ on the unit. “USER EQ” is
displayed.
2. Press USER EQ on the unit repeatedly until
desired setting appears in the display window.
3. Rotate Multi Jog on the unit to adjust the value.28 Operating
Advanced Operations To stop recording
To stop recording, press USB REC on the remote
control or USB REC / DEMO on the unit.
Recording to USB
To select recording bit rate
You can record a various sound source to USB.
(CD, USB 1, FM) You can select recording bit rate. (CD, USB 1, FM)
1. Connect the USB device to the unit. 1. Press and hold USB REC on the remote control
or USB REC / DEMO on the unit for 3 seconds.
2. Press F to select a function you want to record.
2. Press C/V to select a bit rate.
3. Start the recording by pressing USB REC on the
remote control or USB REC / DEMO on the unit. 3. Press USB REC on the remote control or
USB REC / DEMO on the unit to finish the
Function Status Result setting.
Play/Pause Recorded until stop.
3 The making of unauthorized copies of
Resume stop Quick recorded the latest copy-protected material, including computer
Operating
(Page 32) song. programs, files, broadcasts and sound
recordings, may be an infringement of
Quick recorded All songs copyrights and constitute a criminal offense.
This equipment should not be used for such
In case below, scope is
purposes.
limited.
Be responsible
- After File search Respect copyrights
(Page 17), quick
recorded an indexed song
- Only while the Folder
CD, USB 1
name is displayed on the
display window, quick
Full stop recording All songs on
Folder. (Folder Search
Mode is released when
there is no button input
for a few seconds after
entering the folder search
mode.) (Page 17)
- After JUKEBOX On
(Page 30), quick
recorded All songs of
JUKEBOX.
FM - Recorded until stop.
-- If you connect both USB1 and USB2, press USB REC
on the remote control or USB REC / DEMO on the
unit when USB1 or USB2 which you want to record
blinks in the display window.Operating 29
,,Note ,,Note
yy For stable recording, the output sound level yy You can record various sound using DJ PAD,
goes down on its own when you record music MIC or GUITAR.
from CD to USB. (Except when recording USB/ CD that are in
yy You can only change volume level between stop status.)
MIN and 30 during recording. (Only CD yy Microphone and Guitar sound will be
function) recorded by fixed volume level even if you
yy When you stop recording, the file that has control Microphone and Guitar volume.
been recorded at that time will be stored. yy You may not store more than 2,000 files.
(Except when recording MP3/ WMA files yy In case of the unsupported MP3/WMA file,
that are in stop status.) the file recording may be stopped.
yy Do not remove the USB device or turn off yy When you are recording during playback, the
the unit during USB recording. If does not, an sound now playing is output.
incomplete file may be made and not deleted
on PC. yy VOICE CANCELLER or KEY CHANGER
will be reset, if you use recording function 3
yy If USB recording does not work, the message during operating VOICE CANCELLER or KEY
Operating
like “NO USB”, “ERROR”, “USB FULL”, “NOT CHANGER.
SUPPORT” or “FILE MAX” is displayed on the
display window. yy VOICE CANCELLER or KEY CHANGER can
not be operated during recording.
yy Multi card reader device or external HDD can
not be used for USB recording. yy It’ll be stored as follows.
yy A file is recorded by about 512 Mbyte when AUDIO CD MP3/WMA
you record for a long term. Play or pause status Play or pause status
$%@3&$ '*-&@3&$ $%@3&$ '*-&@3&
"6%*0@ "6%*0@53"$,@ "#$
"6%*0@ "6%*0@53"$,@ %&'
The other status The other status
$%@3&$ '*-&@3&$ $%@3&$ '*-&@3&$
"6%*0@ "6%*0@53"$,@ "#$ 'JMFOBNF
"6%*0@ "6%*0@53"$,@ %&' 'JMFOBNF
Tuner 5I
1MBZ
5IFPUIFSTUBUVT
5IFPUIFSTUBUVT
1MBZPSQBVTFTUBUVT
Tuner: The current recording frequency is shown. 1MBZPSQBVTFTUBUVT30 Operating
JUKEBOX Playback Editing JUKEBOX
JUKEBOX function enables you to make a playlist of 1. Press and hold JUKEBOX/MEMORY on the
your favorite tracks/files from a disc or USB device. remote control to enter the edit mode.
A playlist of up to 100 tracks/files can be entered. (Playing will be stopped when you press
JUKEBOX/MEMORY on the remote control.)
Making JUKEBOX list 2. Press PRESET·FOLDER W/S on the remote
1. Press and hold JUKEBOX/MEMORY on the control to select a track/file to edit.
remote control to enter the edit mode. 3. Press C/V on the remote control.
(Playing will be stopped when you press 4. Press JUKEBOX/MEMORY on the remote
JUKEBOX/MEMORY on the remote control.) control.
2. Select a track/file by pressing C/V on the 5. Repeat 2 to 4 to store the other tracks/files.
remote control.
6. Press JUKEBOX/MEMORY on the remote
3. Press JUKEBOX/MEMORY on the remote control once again.
control to save the track/file.
3 To play the JUKEBOX list, press N on the remote
4. Repeat steps 2 - 3 to store other tracks/files. control after you edit the list.
(You can modify the list by pressing
Operating
PRESET·FOLDER W/S on the remote control to
Deleting JUKEBOX list
select the JUKEBOX program number.)
Deleting function only works in the edit mode.
5. Press JUKEBOX/MEMORY on the remote
control once again. 1. Press and hold JUKEBOX/MEMORY on the
remote control to enter the edit mode.
To play the JUKEBOX list, press N on the remote
control after you make the list. Or
Press DELETE on the remote control while
,,Note JUKEBOX is played to enter the edit mode.
When making or modifying the JUKEBOX list, 2. Select a song by pressing PRESET·FOLDER W/S
REPEAT mode is off. on the remote control repeatedly.
3. Press DELETE on the remote control while a
song is selected.
Enjoying JUKEBOX
Press JUKEBOX/MEMORY on the remote control ,,Note
once. “ON-JUKEBOX” appears on the display window. yy If there is no JUKEBOX list, “NO PROG”
To play JUKEBOX list, press N on the remote control. appears on the display window when you
press JUKEBOX/MEMORY on the remote
To cancel it, press JUKEBOX/MEMORY on the
control.
remote control once.
“OFF-JUKEBOX” appears on the display window. yy JUKEBOX is switched off in the case below.
-- Changing to a different function.
-- Turning the unit off and on.
-- Operating the numerical buttons on the
remote control.
-- Playing a file by using SEARCH and
Multi jog on the unit.
yy JUKEBOX list is cleared in the case below.
-- Removing the disc or the USB device.
-- Deleting or recording music files in the USB
device.Operating 31
Other Operations CHILDSAFE Mode
This function helps to prevent you from being
surprised when you turn on the unit in case that the
volume of the unit is set at a high level.
Turn off the sound temporarily
To turn on CHILDSAFE mode, press and hold OK on
Press [on the remote control to mute your sound. the unit when the volume of the unit is “MIN”.
You can mute your unit, for example, to answer the In CHILDSAFE mode, the volume increase gradually.
telephone, the “MUTE” will appear in the display
window. To turn off CHILDSAFE mode, press and hold OK on
the unit when the volume of the unit is “MIN” and
To cancel it, press [on the remote control again or this mode is turned on.
change the volume level.
,,Note
In case of CD, USB or BT (Bluetooth) function,
CHILDSAFE mode does not work after about
2 minutes from power on the unit even if this 3
mode is enabled.
Operating32 Operating
DEMO
In the power off state, press USB REC / DEMO on
the unit once. The unit will power on and display the
each of functions. To cancel the DEMO function, press
USB REC / DEMO on the unit once more.
Resume stop
The unit records the point where you pressed Z
depending on the disc or USB.
If you press Z twice, the unit will clear the stopped
point.
3
OperatingOperating 33
Using Guitar Using Microphone
1. Connect your guitar to the GUITAR IN jack. 1. Connect your microphone to the MIC IN jack.
2. Play the music you want. 2. Play the music you want.
3. Play your guitar with the accompaniment. Adjust 3. Sing along with the accompaniment. Adjust the
the guitar volume by pressing MIC/GUITAR -/+ microphone volume by pressing MIC/GUITAR -/+
on the unit. on the unit.
,,Note ,,Note
yy When not using the guitar, set the GUITAR yy When not using the microphone, set the
volume to minimum and remove the guitar MIC volume to minimum or turn off the MIC
from the GUITAR IN jack. and remove the microphone from the MIC
IN jack.
yy If the guitar is set too near the speaker, a
howling sound may be produced. In this case, yy If the microphone is set too near the speaker,
move the guitar away from the speaker or a howling sound may be produced. In this 3
decrease the sound level by using the MIC/ case, move the microphone away from the
Operating
GUITAR -/+ on the unit. speaker or decrease the sound level by using
the MIC/GUITAR -/+ on the unit.
yy If sound through the guitar is extremely loud,
it may be distorted. In this case, press MIC/ yy If sound through the microphone is extremely
GUITAR -/+ on the unit. loud, it may be distorted. In this case, press
MIC/GUITAR -/+ on the unit.
yy Do not connect a microphone to the GUITAR
IN jack. yy You can give an echo effect or to the sound
from the microphones by pressing
MIC ECHO.
yy Do not connect a guitar to the MIC IN jack.34 Operating
VOICE CANCELLER KEY CHANGER
You can reduce the vocal tones during music You can adjust the key to 9 steps (4 steps higher, 4
playback from various input sources. steps lower and the original key).
Press the VOICE CANCELLER and “ON-VOICE yy To make key more sharp, one by one, press the
CANCELLER” will appear in display window. KEY CHANGER(L) repeatedly during playback.
To cancel it, press VOICE CANCELLER again. yy To make the key more flatten, one by one,
The quality of the VOICE CANCELLER may be press the KEY CHANGER(l) repeatedly during
different depending on the recording conditions of playback.
the music files.
,,Note
,,Note yy This function is available in the CD, USB or BT
yy This function is available in the CD, USB or BT (Bluetooth) Function.
(Bluetooth) Function. yy To initialize it, change the function, disconnect
yy If the function is not available, “NOT the microphone or change the music.
3 SUPPORT” appears in the display window. yy This function may not be initialized depending
yy This function is available to use only when a on the status of connected devices.
Operating
microphone is connected. yy If the function is not available, “NOT
yy If a microphone is not connected, “INSERT SUPPORT” appears in the display window.
MIC” appears in the display window. yy If a microphone is not connected, “INSERT
yy It is not available on the mono source. MIC” appears in the display window.
yy To initialize it, change the function or
disconnect the microphone.
yy This function may not be initialized depending
on the status of connected devices.Operating 35
VOCAL EFFECTS ECHO
When you connect your microphone to the MIC jack, When you connect your microphone to the MIC jack,
you can enjoy karaoke function by changing voice in you can give an echo effect to the sound from the
the various source. microphones by pressing MIC ECHO.
To select various vocal effects mode, pressing VOCAL ECHO 1 ECHO 2 OFF
EFFECTS repeatedly when vocal effects mode
appears in the display window. ,,Note
BASS SOPRANO HELIUM ROBOT yy If a microphone is not connected, “INSERT
DUET MAN DUET WOMAN BASS ECHO1 MIC” appears in the display window.
SOPRANO ECHO1 HELIUM ECHO1 yy If you press VOCAL EFFECTS button on
ROBOT ECHO1 DUET MAN1 DUET ECHO mode, after backing up current ECHO,
WOMAN1 BASS ECHO2 SOPRANO turn off ECHO mode and operate VOCAL
ECHO2 HELIUM ECHO2 ROBOT ECHO2 EFFECTS mode.
DUET MAN2 DUET WOMAN2 OFF Press MIC ECHO again, after backing up
current VOCAL EFFECTS, operate ECHO 3
,,Note mode.
Operating
yy If a microphone is not connected, “INSERT
MIC” appears in the display window.
yy If you press KEY CHANGER or MIC ECHO
on VOCAL EFFECTS mode, after backing up
current VOCAL EFFECTS, turn off VOCAL
EFFECTS mode and operate KEY CHANGER
or ECHO mode.
yy To turn off VOCAL EFFECTS mode, press and
hold VOCAL EFFECTS.36 Operating
LIGHTING Sleep Timer Setting
This function offers a party atmosphere by operating Press SLEEP on the remote control repeatedly to
the lighting on the unit. select delay time between 10 and 180 minutes.
Press LIGHTING on the unit repeatedly. After the delay time, the unit will be turned off.
PARTY WATER FOREST (MY STYLE) OFF To cancel the sleep function, press SLEEP on the
remote control repeatedly until “OFF” appears.
,,Note
yy Lighting function is available in all functions. ,,Note
yy You can check the remaining time before the
yy Lighting mode retains its previous mode
unit is turned off. Press SLEEP on the remote
when you first press LIGHTING on the unit,
control to check or change the remaining
press again to change modes.
time.
yy If you want to use MY STYLE, you have to
yy You can edit the remain time when the
register a source with “LG XBOOM” app.
remaining time or “DIMMER” is displayed.
3 yy Do not look directly at the light emitting part
when the LIGHTING is turned on.
Operating
yy Operation may be different depending on the Dimmer
played music, connected device or setting
status. Press SLEEP on the remote control once.
The display window will be darkened by half.
yy If the illumination brightness is glaring, switch
on the room lights or turn off the LIGHTING To cancel it, press SLEEP on the remote control
of the unit. repeatedly until “OFF” appears.
yy You can also turn off the light by pressing
and holding LIGHTING on the unit.
,,Note
All the lighting turns off when Dimmer is being
operated.Operating 37
Auto power down ,,Note
yy Depending on the connected device, this
This unit will turn itself off to save electricity in the
function may not operate.
case were the main unit is not connected to an
external device and is not used for 15 minutes. yy Depending on the connected device, the unit
The unit will also turns itself off after six hours if turns on but Bluetooth function may not be
the main unit has been connected to another device connected.
using the analog inputs. yy If you disconnect Bluetooth connection by
Auto power down function is applied to only MAIN this unit, some Bluetooth devices try to
unit in case of WIRELESS PARTY LINK connection. connect to the unit continually. Therefore it is
In case of OTHER unit, Auto power down is available recommended to disconnect the connection
after disconnection OTHER unit and MAIN unit. before turning off the unit.
yy If you try to connect to the “LG XBOOM” app,
How to disconnect the wireless Bluetooth function of this unit is turned on.
network connection or the wireless (Android Only)
device. yy If you turn on the unit using LG TV or 3
Turn off the unit by pressing the power button for Bluetooth function, proper function of this
Operating
more than 5 seconds. unit is turned on.
yy If you have already paired with this unit, this
unit can automatically turn on by an input
AUTO POWER On source when this unit is turned off.
This unit automatically turns on by an input source:
LG TV, Bluetooth.
When you turn on your TV connected to this unit,
this unit recognizes the input signal and selects the
suitable function. You can hear the sound from the
unit.
If you try to connect your Bluetooth device, this unit
turns on and connects your Bluetooth device.
You can play your music.
When you turn off this unit by pressing 1 on the
unit for 5 seconds each time, you can turn on or off
the AUTO POWER function.
On Display Description
AUTO POWER function is
ON-AUTO POWER
turned on.
AUTO POWER function is
OFF-AUTO POWER
turned off.38 Operating
Auto function change ,,Note
yy This function is not available during recording
This unit recognizes input signals such as, Bluetooth
or deleting.
and LG TV and then automatically changes to the
suitable function. yy If the Bluetooth connection lock function
is set, Bluetooth and LG TV connection will
When you try to connect Bluetooth be only available on Bluetooth and LG TV
function.
device
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.
When LG TV is connected
When you turn on your LG TV connected by LG
3 Sound Sync (Wireless connection), this unit changes
the function to LG TV. You can hear the sound from
your TV.
OperatingOperating 39
Setting the Clock Using your unit as an alarm clock
1. Turn the unit on.
1. Turn the unit on. 2. Press and hold ALARM on the remote control.
2. Press and hold CLOCK on the remote control. 3. Press C/V on the remote control to change
3. Select time mode by pressing C/V on the the hours and minutes and press RDS/SET on
remote control. the remote control to save.
- AM 12:00 (for an AM and PM display) or 0:00 4. Press C/V on the remote control to select
(for a 24 hour display) function and press RDS/SET on the remote
control to save.
4. Press RDS/SET on the remote control to confirm
- Press C/V on the remote control to select
your selection.
a preset number when you select tuner and
5. Select the hours by pressing C/V on the then, press RDS/SET on the remote control.
remote control. If there is no preset number, this step is skipped.
6. Press RDS/SET on the remote control. 5. Press C/V on the remote control to change
the volume and press RDS/SET on the remote
3
7. Select the minutes by pressing C/V on the
remote control. control to save.
Operating
8. Press RDS/SET on the remote control.
,,Note
yy If you set the clock time, you can check the
Setting the Clock through “LG time by pressing CLOCK on the remote
XBOOM” App control even when the unit is turned off.
yy You can set alarm after you set the clock
Install “LG XBOOM” app on your Android or iOS
time.
device. (Page 23-24)
yy If you set the clock time and alarm, you
Your unit’s clock will be automatically synchronized
can check the alarm setting information by
with your device by activating Bluetooth connection
pressing ALARM on the remote control even
through “LG XBOOM” app.
when the unit is turned off.
yy You can select ALARM ON/OFF mode by
pressing ALARM on the remote control.40 Operating
LG Sound Sync ,,Note
yy You can also use the remote control of
this unit while using LG Sound Sync. If you
use TV’s remote control again, the unit
synchronizes with the TV. (According to TV
Specifications, the volume and mute of this
You can control some functions of this unit by unit synchronize with TV.)
your TV’s remote control with LG Sound Sync. It is yy If the connection fails, check the conditions of
compatible with LG TV that supports LG Sound Sync. this unit and your TV: power, function.
Make sure your TV has the LG Sound Sync logo.
yy Make sure of the condition of this unit and
Controllable function by LG TV’s remote control: the connection in the cases below when
Volume up/down, mute using LG Sound Sync.
1. Turn on the unit by pressing 1. -- The unit is turned off.
2. Press F until LG TV function is selected. -- Changing to a different function.
3 3. Set up the sound output of TV to listen to the -- Disconnecting the wireless connection
sound through this unit: caused by interference or a distance.
Operating
“PAIRED” appears on the display window for
about 3 seconds and then you can see “LG TV” yy The amount of time to turn off this unit is
on the display window if the TV and this unit are different depending on your TV.
connected normally. yy If you try to change the function on using
(Refer to the TV’s instruction manual for the the LG TV function, volume will be change
details of LG Sound Sync.) according to the LG TV volume level.
yy If you turned off the unit directly by pressing
1, LG Sound Sync will be disconnected.
To use this function again, you should
reconnect the TV and the unit.
yy The volume may be increased when the TV
and this unit is connected by LG Sound Sync.
Decrease the TV volume and then connect
with this unit.
yy When you turn on your LG TV connected
by LG Sound Sync or enter LG TV function,
this unit changes the function to LG TV
automatically.
yy You should set the TV Sound output manually
depending on the TV version.
yy If you control TV volume when this unit and
TV are connected by LG Sound Sync, this unit
may louder the volume due to synchronizing
volume with TV’s.You can also read
