Product Line Flooring Adhesives
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Product Line Flooring Adhesives Effective from 1 / 2020
PREPARING
38 SYMBOLS / EXPLANATIONS WAKOL MS 330 Moisture Barrier
SYMBOLS / EXPLANATIONS 39
4
WAKOL PU 280 Moisture Barrier 4
WAKOL D 3045 Special Primer 5
SCAQMD Limited Warranty WAKOL D 3035 Dispersion Primer 5
WAKOL DL 3078 Conductive Primer 6
The Californian South Coast Air Quality Management District, (SCAQMD) is based Loba-Wakol, LLC warrants to its original purchaser that, at the time of delivery by Separations between floorboards or flooring units are a natural occurring condi- AN AMOUNT UP TO THE ORIGINAL COST OF LABOR AND MATERIAL FOR THE
WAKOL MS 315 Crack Filler 6
in Diamond Bar and covering Orange County and parts of Los Angeles, Riverside Loba-Wakol, LLC, the flooring adhesive products described in the Loba-Wakol, LLC tion and are not necessarily a defect and are not covered by this Limited Warranty. AFFECTED SECTION OF THE FLOOR.
WAKOL PS 205 Crack Filler 7
and San Bernadino counties. SCAQMD rules include limitation of VOC content a.o. Catalogue (“Products”) will conform to Loba-Wakol, LLC’s pulished specifications, The Moisture Damage Warranty doesDnot cover failures Additive
from conditions of high THE PURCHASER ACKNOWLEDGES THAT THE REMEDIES PROVIDED IN7 THIS
WAKOL 3060 Plastification
in adhesives (rule 1168), and are referenced by LEED and other sustainable build- which may be obtained at www.loba-wakol.com or www.wakol-usa.com or are alkali, hydrostatic pressure; vapor emissions above the limitsdust-reduced
specified by the LIMITED WARRANTY ARE IT‘S SOLE AND EXCLUSIVE REMEDIES, AND LOBA-
WAKOL Z 615 Levelling Compound, 8
ing ranking schemes in the world. Purpose of this limitation is to protect urban available upon request at 1-800 230 6456. WAKOL, LLC’S SOLE OBLIGATION, FOR ANY BREACH OF REPRESENTATION
Guidelines or the Instructions;WAKOL
unapproved flooring or subflooring;
Z 631 Levelling Compound improper sub- 8 OR
outside air against smog, especially against formation of ground level ozone. For the Products sold by Loba-Wakol LLC, Loba-Wakol, LLC provides the follow- flooring preparation; or improper installation. WARRANTY, AND IS IN LIEU OF ALL OTHER REMEDIES.
California Air Resources Board ARB offers a list with different VOC Limits for WAKOL Z 501 Patching Compound 9
ing warranties to its original purchaser for a period of 10 years for residential Any repairs or replacement of flooring or subflooring without prior writ- Purchaser must bring any legal action for breach of warranty within the earlier
Architectural Coating categories that are valid in different California Districts, and INSTALLING
application and 5 years for commercial applications when those Products ten authorization by Loba-Wakol, LLC willRESILIENT FLOORING
void the warranty. Any removal of (a) one year after the claim or cause of action has accrued or (b) the period
a VOC calculator for achieving VOC content in agreement with their rules. There are selected, used, applied and cared for according to the requirements in this WAKOL MSprior
550 Resilient 10
of the installed Products without writtenand Rubber Flooringby
authorization Adhesive
Loba- prescribed by the applicable statutes of limitation or repose.
is no direct correlation between VOC content and the emission into indoor air Limited Warranty: WAKOL PU 270 Polyurethane Adhesive 10
Wakol, LLC will void the warranty. Some States do not allow limitations on how long an implied warranty
over time. For that reason, LEED for schools and the US Green Building Initiative
are specifying limit values for VOC emission into indoor air, mainly based on
WAKOL DL 3365 StarLeit lasts, so the above limitation may not apply to you. This warranty11gives
1. Bond Warranty. The products will bond the appropriate flooring products
California Section 01350 specification. Claims: WAKOL D 3330 Luxury Vinyl Tile Adhesive the purchaser specific legal rights. The purchaser may also have11other
within the limitations of Wakol’s most recently published product information, WAKOLperiod,
D 3320the
PVCoriginal
Adhesivepurchaser discovers any 12 the
If within the applicable warranty legal rights, which vary from state to state. Some states do not allow
For more information aqmd.gov/. so long as the Products are used (a) with flooring products that are designed for 12 the
problem in the warranted Products that may be covered Adhesive,
WAKOL D 3319 LVT Flooring fiber containing
by this Limited Warranty, exclusion or limitation of incidental or consequential damages, so
and recommended in writing by the flooring manufacturer for glue down instal- 13
the original purchaser shouldWAKOL
notify DLoba-Wakol,
3318 MultiFlex,
LLCfiber containing
in writing of the alleged above limitation or exclusion may not apply to you.
lations to subflooring that meet the requirements of NWFA and RFCI guidelines
defects (at the address notedWAKOL D 3410
below). Kontakto LLC determines that the
If Loba-Wakol, 13
BAAQMD (“Guidelines”) and (b) in accordance with Wakol’s published specifications,
Product is covered by this Limited Warranty,
WAKOL then Loba-Wakol,
D 965 Tackifier Dispersion LLC shall, at its sole 14
The Bay Area Air Quality Management District (BAAQMD) is a public agency that
technical data sheets, written directions for installation, use and maintenance, and
option and one time only, either repair or replace the non-conforming Product
regulates the stationary sources of air pollution in the nine counties of California’s labels on the Product (“Instructions”).
and the affected section of theINSTALLING WOOD
floo or refund AND CORK
the purchase price FLOORING
paid for each
(San Francisco Bay Area: Alameda, Contra Costa, Marin, Napa, San Francisco, San defective Product and an amountWAKOL MSthe
up to 292original
Wood Flooring
cost ofAdhesive,
labor andfirmmaterial for 15
2. Moisture Damage Warranty. If the WAKOL PU 280 Moisture Barrier is used WAKOL MS 290 Wood 15
Mateo, Santa Clara, southwestern Solano, and southern Sonoma) and adopting air pol- the affected section of the floor. No warranty claimsFlooring
will beAdhesive,
processedfirmif received
lution regulations for the district. The Bay Area Air Quality Management District Rule correctly in combination with the Products, Loba-Wakol, LLC warrants against WAKOL MS 262 Wood Flooring Adhesive, firm-flexible 16
more than thirty (30) days after the applicable warranty period.
Development Program develops regulations to improve air quality, meet federal and moisture damage caused by moisture from the subfloor up to the specified limits WAKOL MS 260 Wood Flooring Adhesive, firm-flexible 16
state air quality standards, reduce risk caused by emissions, and improve public health. in the Instructions for the Products. As mentioned below, as part of any claim for All warranty claims must be directed
WAKOL to:
MS 232 Wood Flooring Adhesive, flexible 17
The rules include limitation of VOC content a.o. in adhesives (regulation 8 rule 51). moisture damage, Loba-Wakol, LLC requires a successful subfloor moisture test Loba-Wakol LLC WAKOL MS 230 Wood Flooring Adhesive, flexible 17
For more information see baaqmd.gov/. prior to installation. 2401 Whitehall Park Drive - Suite 950MS 228 Engineered Wood Flooring Adhesive, flexible
WAKOL 18
These warranties are specific to the Products described in the Catalogue and no Charlotte, NC 28273, USA WAKOL PU 225 Wood Flooring Adhesive 18
other products, and the warranties are only provided to the person or entity that Phone +1 704 527 5919 WAKOL D 3513 Precoat for Cork Flooring 21
Wheelmark purchases it from Loba-Wakol LLC. These warranties are non-transferable. Fax +1 704 527 5922 WAKOL D 3540 Cork Flooring Adhesive 21
The Wheelmark is a mark of conformity valid throughout the EU, confirming suit- The Products must be installed by a professional installer only, and any installation www.loba-wakol.com WAKOL K 410 Wood Flooring Adhesive 22
ability of the respective product for marine equipment in accordance with Council of by anyone not a professional installer voids the warranties. email: info@loba-wakol.com WAKOL MS 335 Hollow Spot and Repair Resin 22
the European Community Directive 2014 / 90 / EU on marine equipment (EC Marine In order for the Limited Warranty to apply, All Products must be selected, used, WAKOL Hollow Spot Repair Kit 23
Equipment Directive – MED). To obtain this mark of conformity, a defined fire test must Included in a claim should be the original purchaser’s name, address, telephone
applied, installed, maintained and cared for in accordance with the Guidelines WAKOL D 6085 Tongue and Groove Glue 23
be passed. In addition to this EC type examination, monitoring measures carried out number, address of the installed Product, identification of the Product used, evi-
and the Instructions. The Instructions may be obtained at www.loba-wakol.com or
by an accredited body are required, e.g. a quality management system as per Module dence of date of purchase or installation, name and address of the installer of the
EXTRA PRODUCTS
www.wakol-usa.com or are available upon request at 1-800 230 6456.
D. The support organisation for the Wheelmark is the IMO, International Maritime product, results of calcium chloride
WAKOLandMS /245
or RH moisture test performed prior to
Montinator 24
Organisation, an affiliate organisation of the UNO. Immediately prior to using a Product for installation, the original purchaser or the installation and a statement of thePUcomplaint regarding the Product.
WAKOL 4519 2-C-PU Accelerator 24
the professional installer must measure the moisture content through a calcium
For more information see http://www.mared.org Loba-Wakol, LLC or its designated
WAKOLrepresentative, shallTowels
RT 5960 Cleaning have the right to examine 24
chloride and / or RH moisture test and confirm it is within the recommended range
the Products and the flooring (including testing of the flooring and subflooring)
or the warranties are void. Do not install the product if the moisture test is outside UNDERLAYS
at the installation site with respect to any /warranty
MATS /claim.
TILESAny removal of the
the recommended range. The moisture test results must be retained by the original
CONNECTED SYSTEMS purchaser or professional installer.
WAKOL
installed Products prior to such TS 160 Sound
examination Dampening
will void Mat
this warranty. Loba-Wakol, 25
Connected Systems stands for harmonised system solutions from Loba and Wakol. LLC may require its own moisture testTSor170
WAKOL verification of any such
Sound Dampening test obtained by
Sheet 25
Due to an intensive cooperation and the exchange of experiences in product develop- the original purchaser. WAKOL TS 102 Sound Dampening Underlayment 26
Exclusions:
ment, our products go through a mutually agreed verification and validation process, WAKOL TS 142 Sound Dampening Underlayment 26
The above warranties do not apply or cover damage to the flooring caused by
which guarantees optimal security for laying and no chemical reaction between finish Additional Limitations: WAKOL TS 145 Sound Dampening Underlayment 27
excessive water (from such causes as broken water pipes, sink overflow, leaky
and adhesive. A list of the products which have the label “Connected Systems” LOBA EXCEPT FOR THE EXPRESS WARRANTIES
WAKOL TS 140ABOVE,
Sound LOBA-WAKOL, LLC MAKES NO
Dampening Underlayment 27
plumbing, flooding, weather conditions, or improper maintenance).
paints and WAKOL Flooring Adhesives can be found at https://www.wakol-usa.com/ REPRESENTATIONS REGARDING THE PRODUCTS, THEIR USE
WAKOL RP 104 Decoupling Sheet OR PERFORMANCE 28
Flooring-Adhesives/Connected-Systems The above warranties do not apply or cover any of the following: (a) Products AND DISCLAIMS ALL REPRESENTATIONS AND WARRANTIES, EXPRESS AND
Updates can be found at www.loba.de/us and www.wakol-usa.com. Professional use
that have not been installed in strict accordance with the requirements of this IMPLIED, WRITTEN OR ORAL,TOOLS / ACCESSORIES
WITH RESPECT TO THE PRODUCTS, INCLUDING
Limited Warranty; (b) Products that have been subjected to conditions of use or THE IMPLIED WARRANTIES OFWAKOL Coating RemovalFITNESS
MERCHANTABILITY, Tool FOR A PARTICULAR 29
of the listed Connected Systems products is a key factor for successful results. Please
maintenance not in strict conformity with the Guidelines and the Instructions; or PURPOSE, AND NON-INFRINGEMENT.
WAKOL MS Special Roller 29
take note of the respective technical data sheets of the products used. Status 10 / 19
(c) Products that have been damaged by negligence, accident or other circum- 29
UNDER NO CIRCUMSTANCESWAKOL WILL US Style Master Trowel
LOBA-WAKOL, LLC BE LIABLE FOR ANY
stances beyond the reasonable control of Loba-Wakol, LLC, including for example WAKOL US Style PUNITIVE
Trowels 29
CONSEQUENTIAL, INCIDENTAL, INDIRECT, OR SPECIAL DAMAGES,
humidity or temperature. 30
INCLUDING LOST PROFITS. INWAKOL Stand-up
NO EVENT SHALLTrowel
LOBA-WAKOL, LLC’S LIABILITY
Wood and cork flooring as natural products, as well as some other flooring materi- EVER EXCEED THE PURCHASE WAKOL
PRICEB5PAID
All in FOR
one blade
THE PRODUCT AT ISSUE AND 30
als, will expand and contract through seasonal temperature and humidity changes. WAKOL Trowel Blades 30
Loba-Wakol LLC
WAKOL Replaceable Nozzle 30
2401 Whitehall Park Drive - Suite 950
WAKOL Applicator 90 31
Charlotte, NC 28273, USA WAKOL Applicator 35 31
Phone +1 704 527 5919 WAKOL Manual Applicator 32
Fax +1 704 527 5922 WAKOL Proportioning Pail 32
www.loba-wakol.com WAKOL Stirring Pail 32
SYMBOLS / EXPLANATIONS 33
Please always observe the product data sheet before processing.
4 PREPARING SYMBOLS / EXPLANATIONS 5
PREPARING 37
WAKOL MS 330 Moisture Barrier WAKOL PU 280 Moisture Barrier WAKOL
EMICODE D 3045 Special Primer WAKOL D 3035 Dispersion Primer
EMICODE is a trademark-protected seal for product classification for modern, Emission chamber tests are performed for VOCs and aldehydes after a 10 days Shelf
solvent-free and low-emission laying materials and construction products. These life period, after (in total) 11, 12 and 14 days. The resulting air concentrations then
include adhesives, levelling compounds, joint seals and sealing materials, underlays, are rated against the Chronic Reference Exposure Levels (CRELs ) concentrations
adhesive strips and parquet lacquers. The inspection symbol for environmental and published by the California Office of Environmental Health Hazard Assessment and
interior hygiene has been awarded since 1997 by the GEV (German Registered procedures developed by the US EPA. Assuming that other products in an office
Association for the Control of Emissions in Products for Flooring Installation) or classroom may be sources of VOCs, CA Section 01350 compliance requires any
to products of manufacturers who subject themselves to strict quality controls products not to exceed one-half the allowable concentration limits.
and regular inspections. With regard to consumer and environmental protection, For details please see: http://www.calrecycle.ca.gov/GREENBUILDING/Specs/
EMICODE provides an orientation aid for the assessment and selection of chemical Section01350/
construction products. The classification system is aimed at planners, consumers
and tradesmen, is company-independent and competitively neutral. Collaborative for High Performance Schools (CHPS)
Description: Description: The EMICODE breaks down into the following 3 emission classes, based on the
Description: The Collaborative for High Performance Schools (CHPS) Criteria includes a credit for
Description:
One component moisture barrier and primer for priming porous/absorbent and non- One component waterproof primer for priming porous and non-porous subfloors and strictly defined
Ready-to-use GEV test
dispersion method
primer (emissions
to create a bond test
withchamber) and the
Wakol levelling GEV classifica-
compounds on low-emitting
Solvent materials.
free acrylic primerSchools projects
for priming porousthat
andspecify and install
non-porous products
subfloors that
prior to themeet
porous/non-absorbent subfloors and for solidifying soft subfloor surfaces. WAKOL MS for rigidifying soft subfloor surfaces. WAKOL PU 280 Moisture Barrier is a premium WAKOL PU 280 Moisture Barrier or WAKOL MS 330 Moisture Barrier, ceramic tiles,
tion criteria: Section 01350
installation can claim upand
of underlayments to 4Wakol
pointsleveling
towards CHPS certification.
compounds.
330 is a premium moisture Barrier for "green" concrete slabs and for concrete with moisture barrier for "green" concrete slabs and for concrete and offers two levels of natural stone flooring, terrazzo, cast asphalt, wooden substrates like OSB or plywood
residual moisture prior to installation of wood and cork flooring. One coat of WAKOL moisture protection: One coat will block moisture up to 12 lbs. / 1000 sq.ft. / 24 hours EMICODE EC1 PLUS very low emission level PLUS
indoors. For details
Special please see: www.chps.net
Features:
MS 330 will block moisture in concrete slabs up to 12 lbs. / 1000 sq.ft. / 24 hours or up or up to 90 % rH (ASTM F 2170-02). Two coats will block moisture up to 18 lbs. / 1000 EMICODE EC1 very low emission level · Zero VOC
to 95 % Rh. WAKOL MS 330 can also be used on radiant heated floors up to 6 Ibs. / sq.ft. / 24 hours or up to 98 % rH (ASTM F 2170-02). No moisture test required: The Special
EMICODEFeatures:
EC2 low emission level · Indoor Advantage Gold™ certification
Ready-to-use
1000 sq.ft. /24 hours or up to 85 % Rh. concrete must be surface dry, at least 28 days old and must have an intact · Zero VOC · Building
Fast drying
materials such as adhesives and sealants, paints and coatings, textiles
waterproofing membrane beneath the slab. WAKOL PU 280 Moisture Barrier may be Especiallysurface
· Non-slip important is the best emission class, EMICODE EC1 PLUS. Status 01 / 12 · Excellent dust binding
Special Features: · Suitable for underfloor heating
and wall coverings, and composite wood, as well as classroom and office furniture
· Improves bonding properties
used on radiant heated floors up to 6 lbs. / 1000 sq.ft. / 24 hours or up to 85 % rH
· No mixing required (ASTM F 2170-02) prior to laying wood flooring. · Ready to use · systems,
Excellent components
coverage and seating that earn this SCS certification meet the indoor
· Fast curing The TVOC thresholds for this class after 28 days are defined as follows: · air emission
Good criteria of California 01350, the California Indoor Air Quality (IAQ)
penetration
· Water resistant when cured Special Features: VOC content: Specifications For Open Panel Office Furniture, and LEED EQ 4.1, 4.2, 4.4, and 4.5.
EMICODE EC1 PLUS for primers, for levelling compounds and for adhesives as
0 g/l US regulatory VOC content:
· Easy to spread · No mixing required
· Isocyanate free · No waste well as subfloors ≤ 60 µg / m .
3
0For
g/l details please see: http://product-testing.eurofins.com
US regulatory
· Fast curing Cleaning agent:
Many Wakol line products correspond to the best emission class, EMICODE EC1 PLUS.
VOC content: · Easy to apply water before primer cures Cleaning agent:
FloorScore ®
They are subjected to especially strict controls according to DIN EN ISO 9001:2015, water before® primer cures
0 g/l US regulatory · Excellent coverage FloorScore IAQ certified flooring products meet the indoor air quality (IAQ)
from theconditions
Climate raw material stage site:
at work to manufacture, with respect to their emission characte-
Cleaning agent: VOC content: 60ristics as °C
°F / 15 well
to as
75their superb,
°F / 24 °C, 40technical
% to functionality. requirements
Climate of theatResilient
conditions Floor Covering Institute (RFCI).
work site:
WAKOL RT 5960 Cleaning Towels before 0 g/l US regulatory 75 % relative humidity 60
For°Fdetails
/ 15 °Cplease
to 75 °F / 24
see: °C, 40 % to
https://rfci.com/floorscore/
primer is cured. Cured primer can be 75 % relative humidity
Application:
easily removed manually Cleaning agent:
mineral spirits before primer cures FloorScore IAQ Certification
®
with short nap velour roller or foam Application:
Application method: roller
FloorScore, developed by the Resilient Floor Covering Institute (RFCI) in conjunc- LEED for Adhesives and Sealants
®
use short nap velour roller, foam roller
use Loba microfibre roller # 60–80 or # Climate conditions at work site: or Loba microfibre roller # 60-80 or #
120 as a primer, WAKOL MS Special 60 °F / 15 °C to 75 °F / 24 °C, 40 % to tion with Scientific Certification Systems (SCS), tests and certifies hard surface
Coverages: Indoor Environmental Quality specifications by LEED®, IEQ credit 4.1
120
Roller or WAKOL A2 Trowel as a 75 % relative humidity flooring
approx. 400and flooring adhesive products for compliance with rigorous indoor air
sq.ft./gal
There are VOC requirements for adhesives and sealants in the LEED® 2009
moisture barrier quality emissions requirements. Individual volatile organic compounds (VOCs) Coverages:
Application: Curing time: specifications
up for on porous
to 280 sq.ft./gal
are evaluated using health-based specifications. Flooring and adhesives that
Coverages: use Loba microfibre roller # 60–80 or # approx. 30-60 minutes; approx. 60-120 • Commercial
substrates, up to Interior
400 sq.ft./gal on non-
approx. 400 sq.ft./gal as a primer; 120 minutes on woodencertification
earn FloorScore substrates earn a legitimately enhanced market position, dis- porous
• Newsubstrates
Construction
approx. 260 sq.ft./gal as a moisture tinguished by the FloorScore certification label.
barrier Coverages: Shelf life: • Coretime:
Curing and Shell
approx. 400 sq.ft./gal per coat 1 Under
year in the FloorScore
unopened program,
container at 70 °Fmanufacturers
/ must submit a written quality • Existing
approx. 10-30Buildings (in concrete
minutes on credit MR3)
and
Curing time: 21control
°C plan, which includes strict requirements for supply chain management. other substrates, not being sensible to
approx. 60 minutes Curing time: This process strongly encourages the identification of chemical sources, helping These goapprox.
moisture, for VOC2-4content
hours ondetermination,
gypsum where all volatiles are determined by
approx. 45 minutes Base:
manufacturers to develop materials specifications. By purchasing input materials weight
based andloss after
other drying at
subfloors, 110 °C during 1h. Besides VOC, also water evaporates
being
Shelf life: acrylate dispersion then. Therefore
moisture sensible a water determination is added and all water is subtracted.
with low concentrations of the target VOCs, manufacturers gain increasing confi-
1 year in unopened container at 70 °F / Shelf life: Furthermore, all VOCs that are not relevant for ozone generation in ground-level
21 °C 1 year in unopened container at 70 °F / dence that their products will meet criteria for certification.
Packaging: Shelf life:
21 °C WA-FL-049
For details- 2.5 gal see: https://rfci.com/floorscore/
please 1atmosphere ("exempt
year in unopened compounds")
container at 70 °F / are subtracted. Limit values are different per
Base: product
21 °C group and application.
MS-polymer Base:
polyurethane resin Some examples of limit values (Volatiles minus water minus exempt compounds):
Base:
Packaging: Air Quality Seal • Flooring
acrylate adhesives 50 g / l
dispersion
WA-FL-136 - 2.5 gal Packaging: • Rubber floor adhesives 60 g / l
Air Quality Seal complying products meet the indoor air emissions
WA-FL-017 - 2.5 gal Packaging:
criteria of • Wood floor
WA-FL-064 - 2.5adhesives
gal 100 g / l
• California Section 01350 Specification • Indoor sealants 250 g / l
• Collaborative for High Performance Schools (CHPS) For details please see: www.usgbc.org
• Indoor Advantage Gold™ certification
• FloorScore label for low emission resilient and hard floorings
California Section 01350 Specification
The Department of Health Services expanded several sub-sections of the indoor
air quality part of Section 01350 through the development of a Standard Practice.
6 PREPARING PREPARING 7
WAKOL DL 3078 Conductive Primer WAKOL MS 315 Crack Filler WAKOL PS 205 Crack Filler WAKOL D 3060 Plastification Additive
Description: Description: Description: Description:
Conductive, dispersion primer for conductive surface adhesion. Replaces the laying of a Quick hardening MS crack filler for renovating concrete subfloor cracks as well as for Polymer-modified 2-component silicate resin to repair hollow spots, fill cracks in Ready-to-use dispersion for improving WAKOL Z 615 Levelling Compound, dust-free for
copper band net. bonding studded boards, metal sections and synthetic or natural stone on absorbent concrete slabs and for bonding wood moulding and metal profiles such as stair nosing increasing adhesion, flexibility and reduction of shrinkage applications indoors.
and non-absorbent subfloors indoors and outdoors. and transition moulding. Also available as Hollow Spot Repair Kit with syringe and drill
Special Features: bit for injection underneath loose flooring. Special Features:
· Ready to use Special Features: · Use instead of water
· Suitable for underfloor heating · Shake at least 40 seconds – mixture is Special Features: · Zero VOC
· Replaces the laying of a copper band ready · Shake 15 seconds – mixture is ready · Fast drying
net · Suitable for chair castors · Suitable for chair castors · Improves adhesion and flexibility
· For radiant heated floors · For radiant heated floors properties
VOC content: · Virtually odorless · Virtually odorless · Reduces shrinkage of levelling
0 g/l US regulatory · High efficiency · High efficiency compunds
· Suitable for underfloor heating
Cleaning agent: VOC content: VOC content:
water, before primer cures 0 g/l US regulatory 0 g/l US regulatory VOC content:
0 g/l US regulatory
Climate conditions at work site: Climate conditions at work site: Climate conditions at work site:
60 °F / 15 °C to 75 °F / 24 °C, 40 % to 60 °F / 15 °C to 75 °F / 24 °C, 40 % to 60 °F / 15 °C to 75 °F / 24 °C, 40 % to Cleaning agent:
75 % relative humidity 75 % relative humidity 75 % relative humidity water in fresh condition
Application method: Application: Application: Climate conditions at work site:
fine porous foam roller using spray grommet for cracks, adjust nozzle of bottle to size and fill 60 °F / 15 °C to 75 °F / 24 °C, 40 % to
cementing work with serrated trowel crack; use adhesive trowel for bonding 75 % relative humidity
Coverages: metal profiles
up to 400 sq.ft./gal Mixture: Mixture:
2 bottle caps of water per unit MS 315 Mixture: approx. 1.6-2.1 gal. WAKOL D 3060 +
Curing time: 1:1 by volume 55 Ib. per bag of levelling compound
approx. 3-5 hours; the primer must be Coverages:
completely dried before further depending on the scope of the repair Coverages: Shelf life:
processing work dependent on extent of repair work and 1 year in unopened container at 70 °F /
nozzle size needed 21 °C
Shelf life: Working time:
1 year in unopened container at 70 °F / approx. 10 minutes Curing time: Base:
21 °C approx. 30 minutes acrylate dispersion
Curing time:
Base: approx. 90 minutes Working time: Packaging:
acrylate dispersion approx. 10 minutes WA-FL-137 - 2.5 gal
Pot life:
Packaging: approx. 15 minutes Shelf life:
WA-FL-122 - 2.5 gal 1 year in unopened container at 70 °F /
Shelf life: 21 °C
1 year in unopened container at 70 °F /
21 °C Base:
polymer-modified silicate resin
Base:
MS polymer Packaging:
WA-FL-014 - Component A 10.14
Packaging: US.fl.oz
WA-FL-162 - 42.61 US.fl.oz WA-FL-014 - Component B 10.14
US.fl.oz
8 PREPARING PREPARING 9
WAKOL Z 615 Levelling Compound, WAKOL Z 631 Levelling Compound WAKOL Z 501 Patching Compound
dust-reduced
Description: Description: Description:
Premium cement based levelling compound used to level and smooth interior concrete, Portland and hydraulic cement based levelling compound used to level and smooth Self-drying, cement-based, polymer modified, trowel-grade underlayment that provides
terrazzo, ceramic and quarry tile, coating systems and non-watersoluble adhesive interior concrete, terrazzo, ceramic and quarry tile, coating systems and non- a smooth, highly durable finish for use over concrete substrates prior to the installation
residue prior to the installation of all finished flooring - on, above or below grade. watersoluble adhesive residue on concrete prior to the installation of finished flooring - of wood, vinyl and other floor coverings in the most demanding enviroments.
on, above or below grade.
Special Features: Special Features:
· Pourable or pumpable when mixed Special Features: · Applicable with a trowel
with water · Pourable or pumpable when mixed · Installation of floor covering in as little
· WAKOL Z 615 seeks its own level and with water as 30 minutes
provides a durable, flat, smooth floor · WAKOL Z 631 seeks its own level and
surface with minimum labor provides a durable, flat, smooth floor VOC content:
surface with minimum labor 0 g/l US regulatory
VOC content:
0 g/l US regulatory VOC content: Climate conditions at work site:
0 g/l US regulatory 60 °F / 15 °C to 75 °F / 24 °C, 40 % to
Climate conditions at work site: 75 % relative humidity
60 °F / 15 °C to 75 °F / 24 °C, 40 % to Climate conditions at work site:
75 % relative humidity 60 °F / 15 °C to 75 °F / 24 °C, 40 % to Mixture:
75 % relative humidity 1.5 quarts of water per 10 lb. bag of Z
Mixture: 501
6 quarts of water per 55 lb.bag Mixture:
5 quarts of water per 50 lb. bag Coverages:
Coverages: approx. 40 sq.ft. per unit at a thickness
approx. 60 sq.ft. per unit at a thickness Coverages: of 1/16 in''
of 1/8 in'' approx. 50 sq. ft. per unit at a thickness
of 1/8 in Working time:
Working time: approx. 30 minutes
approx. 30 minutes Working time:
approx. 15 minutes Curing time:
Curing time: suitable for walking after approx. 30
suitable for walking after approx. 2 Curing time: minutes; ready for laying after 30
hours; ready for laying after 24 hours, suitable for walking after approx. 2 minutes, even in thicker layers
even in thicker layers hours; ready for laying after 24 hours,
even in thicker layers Shelf life:
Extended: 9 months in unopened sack at 70 °F /
up to 1 1/32 in'' Extended: 21 °C
up to 1 1/32 in''
Unextended: Base:
1/32 in'' - 1/2 in'' Unextended: special cement
1/32 in'' - 1/2 in''
Shelf life: Packaging:
6 months in unopened sack at 70 °F / Shelf life: WA-FL-168 - 10 lb. (4.5 kg)
21 °C 1 year in unopened sack at 70 °F / 21 °C
Base: Base:
special cement special cement
Packaging: Packaging:
WA-FL-051 - 55 lb. (25 kg) WA-FL-167 - 50 lb. (22.7 kg)10 INSTALLING RESILIENT FLOORING INSTALLING RESILIENT FLOORING 11
WAKOL MS 550 Resilient and Rubber WAKOL PU 270 Polyurethane Adhesive WAKOL DL 3365 StarLeit WAKOL D 3330 Luxury Vinyl Tile
Flooring Adhesive Adhesive
Description: Description: Description: Description:
One component adhesive for the installation of homogeneous and heterogeneous PVC- 2-component polyurethane adhesive for the interior installation of rubber flooring, Fibre-containing dispersion-based wet-set adhesive for the interior installation of For installing Luxury Vinyl Tile flooring, textile flooring with PVC, PUR or latex backing
flooring in sheets and tiles, luxury vinyl tile floor in planks and tiles, solid vinyl plank or homogeneous and heterogeneous PVC-flooring in sheets and tiles, solid vinyl plank or conductive PVC flooring in rolls and tiles, textile flooring, linoleum, flooring, rubber on absorbent subfloors, homogeneous PVC flooring in sheets and tiles and CV flooring
tile per ASTM F 1700 13a, rubber flooring and outdoor floorings on absorbent and non- tile per ASTM F 1700 13a, luxury vinyl tile floor in planks and tiles, outdoor floorings, floor coverings up to 1/8 in'' (4 mm) on absorbent subfloors. on all absorbent and non-absorbent subfloors.
absorbent subfloors indoors and outdoors. ceramic tiles, on absorbent and non-absorbent subfloors indoors and outdoors.
Special Features: Special Features:
Special Features: Special Features: Packaging: · Fiber reinforced for laying conductive · Zero VOC
· Zero VOC · Zero VOC WA-FL-016 - 1.0 gal A-Komp. floorings · Solvent free
· Suitable for chair castors · Can be used directly on top of WAKOL WA-FL-016 - 0.27 gal B-komp. · Zero VOC · Extra long open time
· Approved for radiant heated floors PU 280 Moisture Barrier · Suitable for underfloor heating · Excellent coverage
· Suitable for heavy loads · Suitable for heavy loads · Pajarito 7/25 enclosed · Application with special roller
· Waterproof · Suitable for chair castors · High initial strength
· Can be used directly on top of WAKOL · Approved for radiant heated floors VOC content: · Floor ready to use immediately after
PU 280 Moisture Barrier or WAKOL MS · Waterproof 0 g/l US regulatory installation
330 Moisture Barrier · Suitable for radiant heated floors
VOC content: Cleaning agent: · Suitable for chair castors
VOC content: 0 g/l US regulatory water, before adhesive cures
0 g/l US regulatory VOC content:
Cleaning agent: Climate conditions at work site: 0 g/l US regulatory
Cleaning agent: WAKOL RT 5960 Cleaning Towels before 60 °F / 15 °C to 75 °F / 24 °C, 40 % to
WAKOL RT 5960 Cleaning Towels before adhesive is cured 75 % relative humidity Cleaning agent:
adhesive is cured water, before adhesive cures
Mixture: Application method:
Climate conditions at work site: 5.7 weight parts component A + 1 Pajarito 25 or TKB S2 for textile flooring, Climate conditions at work site:
60 °F / 15 °C to 75 °F / 24 °C, 40 % to weight part component B TKB S2 for linoleum, Pajarito 7 for PVC 60 °F / 15 °C to 75 °F / 24 °C, 40 % to
75 % relative humidity and rubber flooring 75 % relative humidity
Application:
Application method: trowel notch size according to WAKOL Coverages: Application:
trowel notch size according to WAKOL A1 - 3/64 in'' by 1/16 in'' by 1/64in'' V- up to 260 sq.ft./gal with special roller
A1 - 3/64 in'' by 1/16 in'' by 1/64 in'' V- Notch, WAKOL A2 - 1/16 in'' by 1/16 in''
Notch; WAKOL A2 - 1/16 in'' by 1/16 in'' by 1/16 in'' V-Notch, WAKOL B1 - 5/64 Flash time: Coverages:
by 1/16 in'' V-Notch; WAKOL B1 - 5/64 in'' by 3/32 in'' by 7/64 in'' V-Notch or approx. 10-15 minutes approx. 200-400 sq.ft./gal
in'' by 3/32 in'' by 7/64 in'' V-Notch or 3/32 in'' by 3/32 in'' by 3/32 in'' V-
3/32 in'' by 3/32 in'' by 3/32 in'' V- Notch Working time: Flash time:
Notch approx. 20-40 minutes approx. 20-30 minutes
Coverages:
Coverages: approx. 135-260 sq.ft./gal Curing time: Working time:
approx. 135-260 sq.ft./gal light foot traffic after 2 hours, full traffic approx. 180 minutes
Flash time: after 24 to 72 hours, depending on room
Flash time: approx. 5-70 minutes, depending on the climate on job site Curing time:
approx. 0-20 minutes, depending on the flooring curing takes 24 hours, light traffic
flooring Shelf life: allowed immediately after installation.
Working time: 1 year in unopened container at 70 °F /
Working time: approx. 70-80 minutes 21 °C Shelf life:
approx. 35 minutes 1 year in unopened container at 70 °F /
Curing time: Base: 21 °C
Curing time: light foot traffic after 6 to 8 hours; full acrylate dispersion
light foot traffic after 12 hours; full traffic after 24 to 48 hours depending on Base:
traffic after 24 to 48 hours depending on room climate on job site Packaging: dispersion mixture
room climate on job site WA-FL-121 - 2.5 gal
Pot life: Packaging:
Shelf life: approx. 40 minutes WA-FL-032 - 2.5 gal
1 year in unopened container at 70 °F /
21 °C Shelf life:
1 year in unopened container at 70 °F /
Base: 21 °C, freeze thaw stable
MS-Polymer
Base:
Packaging: polyurethane resin and hardener
WA-FL-118 - 3.0 gal12 INSTALLING RESILIENT FLOORING INSTALLING RESILIENT FLOORING 13
WAKOL D 3320 PVC Adhesive WAKOL D 3319 LVT Flooring Adhesive, WAKOL D 3318 MultiFlex, fiber WAKOL D 3410 Kontakto
fiber containing containing
Description: Description: Description: Description:
For laying PVC design floorings, textile floorings with PVC, PUR or latex fittings on Fibre-reinforced dispersion-based wet-set adhesive for the interior installation of LVT Fiber-reinforced, dispersion-based wet-set adhesive for the interior installation of Solvent free, water based contact adhesive for the interior installation of textile flooring
absorbent subfloors, homogeneous PVC flooring in sheets and tiles and CV flooring on flooring in planks and tiles, homogeneous and heterogeneous PVC flooring as well as rubber and recycled rubber flooring, homogeneous and heterogeneous PVC-flooring in such as tufting, web and needle fleece flooring, homogeneous and heterogeneous PVC
all absorbent and non-absorbent subfloors. CV flooring on absorbent subfloors. sheets and tiles, Luxury Vinyl Tile floor in planks and tiles, CV and VCT floorings and flooring, PVC soft skirting boards, stair profiles, hollow neck plinths, CV flooring,
linoleum on absorbent subfloors. linoleum flooring, rubber floor coverings, impact walls on absorbent and non-
Special Features: Special Features: absorbent subfloors.
· Zero VOC · Fiber reinforced to withstand heavy roll Special Features:
· Long open time and static loads · Fiber reinforced to withstand heavy roll Special Features:
· Can be used as wet set as well as · Zero VOC and static loads · Zero VOC
pressure sensitive adhesive · Suitable for radiant heat · Zero VOC · Safe
· Easy cleanup with water · Suitable for radiant heat · Solvent free
VOC content: · Specially for LVT installations · Easy cleanup with water
0 g/l US regulatory VOC content:
VOC content: VOC content: 0 g/l US regulatory
Cleaning agent: 0 g/l US regulatory 0 g/l US regulatory
water, before adhesive cures Cleaning agent:
Cleaning agent: Cleaning agent: water, before adhesive cures
Climate conditions at work site: water, before adhesive cures water, before adhesive cures
60 °F / 15 °C to 75 °F / 24 °C, 40 % to Climate conditions at work site:
75 % relative humidity Climate conditions at work site: Climate conditions at work site: 60 °F / 15 °C to 75 °F / 24 °C, 40 % to
60 °F / 15 °C to 75 °F / 24 °C, 40 % to 60 °F / 15 °C to 75 °F / 24 °C, 40 % to 75 % relative humidity
Application: 75 % relative humidity 75 % relative humidity
trowel notch size according to WAKOL Application method:
A1 - 3/64 in'' by 1/16 in'' by 1/64 in'' V- Application method: Application: short-haired velour roller, brush, trowel
Notch, WAKOL A2 - 1/16 in'' by 1/16 in'' trowel notch size according to WAKOL trowel notch size according to WAKOL notch size according to WAKOL A1 -
by 1/16 in'' V-Notch, WAKOL B1 - 5/64 A2 or 1/16 in'' by 1/16 in'' by 1/16 in'' A2 - 1/16 in'' by 1/16 in'' by 1/16 in'' V- 3/64 in'' by 1/16 in'' by 1/64 in'' V-
in'' by 3/32 in''' by 7/64 in'' V-Notch or V-Notch notch or 3/32 in'' by 3/32 in'' by 3/32 in'' Notch
3/32 in'' by 3/32 in'' by 3/32 in'' V- V-Notch; WAKOL B1 - 5/64 in'' by 3/32
Notch Coverages: in'' by 7/64 in'' V-Notch or 3/32 in'' by Coverages:
up to 160 sq.ft./gal 3/32 in'' by 3/32 in'' V-Notch up to 180 sq.ft./gal
Coverages:
approx. 135-260 sq.ft./gal Flash time: Coverages: Flash time:
approx. 5-10 minutes approx. 135-160 sq.ft./gal approx. 30-60 minutes depending on
Flash time: the absorbancy of the subfloor, approx.
approx. 5-20 minutes on absorbent Working time: Flash time: 180 minutes for heavily textured textile
subfloors, approx. 30-40 minutes on approx. 10-20 minutes approx. 5-10 minutes flooring, preferably overnight
non-absorbent subfloors
Curing time: Working time: Working time:
Working time: light foot traffic after 2 hours, full traffic approx. 10 minutes approx. 120 minutes, precoated cork
approx. 30-50 minutes after 24 to 72 hours, depending on room flooring approx. 90 minutes
climate on job site Curing time:
Curing time: light foot traffic after 2 hours, full traffic Curing time:
light foot traffic after 3 hours, full traffic Shelf life: after 24 to 72 hours, depending on room curing takes approximately 24 hours,
after 24 to 72 hours, depending on room 1 year in unopened container at 70 °F / climate on job site light traffic allowed immediately after
climate on job site 21 °C installation
Shelf life:
Shelf life: Base: 1 year in unopened container at 70 °F / Shelf life:
1 year in unopened container at 70 °F / acrylate dispersion 21 °C 1 year in unopened container at 70 °F /
21 °C 21 °C
Packaging: Base:
Base: WA-FL-119 - 2.5 gal acrylate dispersion Base:
acrylate dispersion polychloroprene dispersion
Packaging:
Packaging: WA-FL-108 - 2.5 gal Packaging:
WA-FL-093 - 2.5 gal WA-FL-105 - 0.5 gal14 INSTALLING RESILIENT FLOORING INSTALLING WOOD AND CORK FLOORING 15
WAKOL D 965 Tackifier Dispersion WAKOL MS 292 Wood Flooring WAKOL MS 290 Wood Flooring
Adhesive, firm Adhesive, firm
Description: Description: Description:
Fixation dispersion for the interior installation of slip-resistant laying of self-laying Shear-resistant single component adhesive for the interior installation of 3/4 in" solid Firm, premium, single component, MS polymer adhesive for the interior installation of
carpet tiles with bitumen or fleece backing, self-laying carpet tiles with PVC or PUR wood strip as well as wood planks, Bamboo flooring strand-woven or engineered, End Wood flooring such as 3/4 in'' or less solid strip, plank, finger parquet and engineered
backing on properly prepared subfloors. grain block, Finger parquet, Engineered wood flooring with no limitations, WAKOL TS wood flooring of all dimensions as well as cork flooring with MDF or engineered core
102 Sound Dampening Underlayment, WAKOL RP 104 Decoupling Sheet, Floating cork or backing and Wakol Sound Underlayments.
Special Features: planks with wood, MDF or natural cork backing if glue down installation is approved
· Fast drying time from the manufacturer. Special Features: Shelf life:
· Can be used directly over WAKOL PU · Glue down installation of 3/4 in'' solids 18 months in unopened container at
280 Moisture Barrier or WAKOL MS 330 Special Features: Packaging: with no limitation 70 °F / 21 °C
Moisture Barrier · Easy to apply WA-FL-123 - 1.0 gal sausage (Ø 3 1/2 · Very high e-modulus and shear
· High bond strength in'' (88 mm)) strength Base:
VOC content: · Very low emissions · Easy clean up, will not etch prefinished MS-Polymer
0 g/l US regulatory · Zero VOC surfaces
· Can be used directly over WAKOL PU · Very low emissions Packaging:
Cleaning agent: 280 Moisture Barrier or WAKOL MS 330 · Zero VOC WA-FL-089 - 3.0 gal
water, before adhesive cures Moisture Barrier · Long working time
· Can be used directly over WAKOL PU
Climate conditions at work site: VOC content: 280 Moisture Barrier or WAKOL MS 330
60 °F / 15 °C to 75 °F / 24 °C, 40 % to 0 g/l US regulatory Moisture Barrier
75 % relative humidity
Cleaning agent: VOC content:
Application method: WAKOL RT 5960 Cleaning Towels before 0 g/l US regulatory
short nap velour roller, foam roller or adhesive is cured. Cured adhesive can
Loba microfibre roller # 60 - 80 or # 120 be easily removed manually Cleaning agent:
WAKOL RT 5960 Cleaning Towels before
Coverages: Climate conditions at work site: adhesive is cured. Cured adhesive can
up to 600 sq.ft./gal 60 °F / 15 °C to 75 °F / 24 °C, 40 % to be easily removed manually
75 % relative humidity
Flash time: Climate conditions at work site:
approx. 30-60 minutes Application method: 60 °F / 15 °C to 75 °F / 24 °C, 40 % to
with WAKOL Applicator 90 and WAKOL 75 % relative humidity
Working time: Replaceable Nozzles or trowel notch size
approx. 24 hours according to WAKOL B3 - 1/8 in'' by 1/8 Application:
in'' by 1/8 in'' V- notch; WAKOL B5 - trowel notch size according to WAKOL
Curing time: 3/16 in'' by 1/2 in'' by 1/4 in'' V- notch B1 - 5/64 in'' by 3/32 in'' by 7/64 in'' V-
none, the laid flooring is immediately or 1/4 in'' by 1/4 in'' by 9/16 in'' V- notch or 3/32 in'' by 3/32 in'' by 3/32 in''
suitable for walking notch; WAKOL B13 - 1/4 in'' by 1/2 in'' VNotch; WAKOL B3 - 1/8 in'' by 1/8 in''
by 1/4 in'' V-notch or 1/4 in'' by 1/4 in'' by 1/8 in'' V- notch; WAKOL B13 - 1/4
Shelf life: by 7/16 in'' V- notch in'' by 1/2 in'' by 1/4 in'' -notch or 1/4
1 year in unopened container at 70 °F / in'' by 1/4 in'' by 7/16 in'' V- notch;
21 °C Coverages: WAKOL B5 - 3/16 in'' by 1/2 in'' by 1/4
up to 70 sq.ft./gal in'' V- notch or 1/4 in'' by 1/4 in'' by
Base:
9/16 in'' V-notch
synthetic resin dispersion Flash time:
none, no waiting required Coverages:
Packaging:
approx. 50-100 sq.ft./gal
WA-FL-120 - 2.5 gal Working time:
approx. 40 minutes Flash time:
none, no waiting time required
Curing time:
light foot traffic after 6 to 8 hours; full Working time:
traffic after 24 to 48 hours depending on approx. 40 minutes
room climate on job site
Curing time:
Shelf life: light foot traffic after 6 to 8 hours; full
1 year in unopened sausage at 70 °F / traffic after 24 to 48 hours, depending
21 °C on room climate on job site
Base:
MS-Polymer16 INSTALLING WOOD AND CORK FLOORING INSTALLING WOOD AND CORK FLOORING 17
WAKOL MS 262 Wood Flooring WAKOL MS 260 Wood Flooring WAKOL MS 232 Wood Flooring WAKOL MS 230 Wood Flooring
Adhesive, firm-flexible Adhesive, firm-flexible Adhesive, flexible Adhesive, flexible
Description: Description: Description: Description:
Firm-flexible 1-component adhesive in a sausage bag for the interior installation of end Firm-flexible, premium single component MS Polymer adhesive for the interior Flexible single component adhesive for the interior installation of 3/4 in'' solid wood Flexible, premium single component MS Polymer adhesive for the interior installation of
matched solid and engineered wood flooring. installation of 3/4 in'' or less solid strip, planks up to 8 in'' wide, Bamboo, strand- strip as well as wood planks up to 4 in'' wide of north American species Engineered 3/4 in'' or less solid strip, lanks up to 4 in'' wide of domestic North American species;
woven or engineered up to 8 in'' wide; end grain block; finger parquet; engineered wood flooring with no limitations. engineered wood flooring with no limitations and Wakol Sound Underlayments. Can
Special Features: Shelf life: wood flooring with no limitations as well as cork flooring with MDF or engineered core also be used as all-in-one adhesive with WAKOL B5 All in on blade for sound and
· Can be used in conjunction with 1 year in unopened sausage at 70 °F / and Wakol Sound Underlayments. Can also be used as all-in-one adhesive with Special Features: moisture mitigation.
WAKOL TS 160 Sound Dampening Mat 21 °C WAKOL B5 All in on blade for sound and moisture mitigation. · Easy to apply
or WAKOL TS 170 Sound Dampening · High bond strength Special Features: Shelf life:
Sheet Base: Special Features: Curing time: · Very low emissions · Good e-modulus and shear strength 18 months in unopened container at
· Easy to apply MS-polymer · Install 3/4 in" solids of up to 8 in'' light foot traffic after 6 to 8 hours; full · Zero VOC · Very low emissions 70 °F / 21 °C
· High bond strength wide traffic after 24 to 48 hours depending on · Can be used directly over WAKOL PU · Zero VOC
· Very low emissions Packaging: · High e-modulus and shear strength room climate on job site 280 Moisture Barrier or WAKOL MS 330 · Easy to spread Base:
· Zero VOC WA-FL-130 - 1.0 gal sausage (Ø 3 1/2 · Very low emissions Moisture Barrier · Easy clean up MS-polymer
· Can be used directly over WAKOL PU in'' (88 mm)) · Long working time Shelf life: · Will not etch prefinished surfaces
280 Moisture Barrier or WAKOL MS 330 WA-FL-112 - 20.0 US.fl.oz sausage (Ø 1 · Zero VOC 18 months in unopened container at VOC content: · Can be used directly over WAKOL PU Packaging:
Moisture Barrier 15/16 in'' (49 mm)) · Can be used directly over WAKOL PU 70 °F / 21 °C 0 g/l US regulatory 280 Moisture Barrier or WAKOL MS 330 WA-FL-086 - 3.0 gal
280 Moisture Barrier or WAKOL MS 330 Moisture Barrier
VOC content: Moisture Barrier Base: Cleaning agent:
0 g/l US regulatory MS-Polymer WAKOL RT 5960 Cleaning Towels before VOC content:
VOC content: adhesive is cured. Cured adhesive can 0 g/l US regulatory
Cleaning agent: 0 g/l US regulatory Packaging: be easily removed manually
WAKOL RT 5960 Cleaning Towels before WA-FL-088 - 3.0 gal Cleaning agent:
adhesive is cured. Cured adhesive can Cleaning agent: Climate conditions at work site: WAKOL RT 5960 Cleaning Towels before
be easily removed manually WAKOL RT 5960 Cleaning Towels before 60 °F / 15 °C to 75 °F / 24 °C, 40 % to adhesive is cured. Cured adhesive can
adhesive is cured. Cured adhesive can 75 % relative humidity be easily removed manually
Climate conditions at work site: be easily removed manually
60 °F / 15 °C to 75 °F / 24 °C, 40 % to Application method: Climate conditions at work site:
75 % relative humidity Climate conditions at work site: with WAKOL Applicator 90 and WAKOL 60 °F / 15 °C to 75 °F / 24 °C,40 % to
60 °F / 15 °C to 75 °F / 24 °C, 40 % to Replaceable Nozzles or trowel notch size 75 % relative humidity
Application: 75 % relative humidity according to WAKOL B3 - 1/8 in'' by 1/8
with WAKOL Applicator 90 and WAKOL in'' by 1/8 in'' V- notch; WAKOL B5 - Application:
Replaceable Nozzles, WAKOL Applicator Application: 3/16 in'' by 1/2 in'' by 1/4 in'' V- notch trowel notch size according to WAKOL
50, WAKOL Applicator 35, WAKOL trowel notch size according to WAKOL or 1/4 in'' by 1/4 in'' by 9/16 in'' V- B1 - 5/64 in'' by 3/32 in'' by 7/64 in'' V-
Manual Applicator or trowel notch size B1 - 5/64 in'' by 3/32 in'' by 7/64 in'' V- notch; WAKOL B13 - 1/4 in'' by 1/2 in'' notch or 3/32 in'' by 3/32 in'' by 3/32 in''
according to WAKOL B 5 - 3/16 in'' by notch or 3/32 in'' by 3/32 in'' by 3/32 in'' by 1/4 in'' V-notch or 1/4 in'' by 1/4 in'' V-Notch; WAKOL B3 - 1/8 in'' by 1/8 in''
1/2 in'' by 1/4 in'' V-notch; WAKOL B 13 V-Notch; WAKOL B3 - 1/8 in'' by 1/8 in'' by 7/16 in'' V- notch by 1/8 in'' V- notch; WAKOL B5 - 3/16
- 1/4 in'' by 1/2 in'' by 1/4 in'' V-notch; by 1/8 in'' V- notch; WAKOL B5 - 3/16 in'' by 1/2 in'' by 1/4 in'' V- notch or 1/4
WAKOL Trowel or V-shaped sized nozzle in'' by 1/2 in'' by 1/4 in'' V- notch or 1/4 Coverages: in'' by 1/4 in'' by 9/16 in'' V-notch;
in'' by 1/4 in'' by 9/16 in'' V-notch; up to 70 sq.ft./gal WAKOL B13 - 1/4 in'' by 1/2 in'' by 1/4
Coverages: WAKOL B13 - 1/4 in'' by 1/2 in'' by 1/4 in'' V-notch or 1/4 in'' by 1/4 in'' by 7/16
one sausage bag (20 fl.oz) will cover in'' V-notch or 1/4 in'' by 1/4 in'' by 7/16 Flash time: in'' V- notch; WAKOL All in one blade -
approx. 9 sq.ft. applied in beads; in'' V- notch; WAKOL All in one blade - none, no waiting required 3/16 in'' by 1/2 in'' by 1/4 in'' V-notch
approx. 13 sq.ft. applied in cut outs of 3/16 in'' by 1/2 in'' by 1/4 in'' V-notch;
WAKOL TS 160 Sound Dampening Mat WAKOL A2 - 1/16 in'' by 1/16 in'' by Working time: Coverages:
or WAKOL TS 170 Sound Dampening 1/16 in approx. 40 minutes approx. 50-100 sq.ft./gal
Sheet
Coverages: Curing time: Flash time:
Flash time: approx. 35-120 sq.ft./gal light foot traffic after 6 to 8 hours; full none, no waiting time required
none, no waiting time required traffic after 24 to 48 hours depending on
Flash time: room climate on job site Working time:
Working time: none, no waiting time required approx. 40 minutes
approx. 40 minutes Shelf life:
Working time: 1 year in unopened sausage at 70 °F / Curing time:
Curing time: approx. 40 minutes 21 °C light foot traffic after 6 to 8 hours; full
light foot traffic after 6 to 8 hours; full traffic after 24 to 48 hours, depending
traffic after 24 to 48 hours depending on Base: on room climate on job site
room climate on job site MS-Polymer
Packaging:
WA-FL-124 - 1.0 gal sausage (Ø 3 1/2
in'' (88 mm))18 INSTALLING WOOD AND CORK FLOORING
WAKOL MS 228 Engineered Wood WAKOL PU 225 Wood Flooring
Flooring Adhesive, flexible Adhesive
Description: Description:
Flexible, premium single component adhesive for the interior installation of engineered Solvent free 2-component Polyurethane adhesive for the interior installation of solid
wood flooring with no limitations. With WAKOL B5 All in on blade suitable as All in one and engineered wood flooring such as solid strip, plank, wood flooring and engineered
adhesive with an integrated moisture barrier exclusively for types of wood flooring wood plank.
with tongue and groove to block moisture in unheated concrete slabs up to 12 lbs.
/1000 sq. ft. / 24 hour (ASTM F 1869) or up to 90 % rH (ASTM F 2170-02). Special Features:
· Superior bonding strength
Special Features: · Easy to spread
· Good e-modulus and shear strength · Long working time
· Very low emissions · Water resistant when cured
· Zero VOC
· Easy to spread VOC content:
· Easy clean up 0 g/l US regulatory
· Will not etch prefinished surfaces
Cleaning agent:
VOC content: WAKOL RT 5960 Cleaning Towels before
0 g/l US regulatory adhesive cures
Cleaning agent: Climate conditions at work site:
WAKOL RT 5960 Cleaning Towels before 60 °F / 15 °C to 75 °F / 24 °C, 40 % to
adhesive is cured. Cured adhesive can 75 % relative humidity
be easily removed manually
Mixture:
Climate conditions at work site: 8 parts component A + 1 part
60 °F / 15 °C to 75 °F / 24 °C,40 % to component B
75 % relative humidity
Application:
Application method: trowel notch size according to WAKOL
trowel notch size according to WAKOL B1 - 5/64 in'' by 3/32 in'' by 7/64 in'' V-
B3 - 1/8 in'' by 1/8 in'' by 1/8 in'' V- notch or 3/32 in'' by 3/32 in'' by 3/32 in''
notch; WAKOL B5 - 3/16 in'' by 1/2 in'' VNotch; WAKOL B3 - 1/8 in'' by 1/8 in''
by 1/4 in'' V- notch or 1/4 in'' by 1/4 in'' by 1/8 in'' V- notch; WAKOL B5 - 3/16
by 9/16 in'' V-notch; WAKOL All in one in'' by 1/2 in'' by 1/4 in'' V- notch or 1/4
blade - 3/16 in'' by 1/2 in'' by 1/4 in'' V- in'' by 1/4 in'' by 9/16 in'' V-notch;
notch WAKOL B13 - 1/4 in'' by 1/2 in'' by 1/4
in'' V-notch or 1/4 in'' by 1/4 in'' by 9/16
Coverages: in'' V-notch
approx. 35-70 sq.ft./gal.
Coverages:
Flash time: approx. 50-100 sq.ft./gal
none, no waiting time required
Flash time:
Working time: none, no waiting time required
approx. 40 minutes
A STRONG CONNECTION
Working time:
Shelf life: approx. 35-40 minutes
18 months in unopened container at
70 °F / 21 °C Curing time:
light foot traffic after 6 to 8 hours, full
FOR YOUR SUCCESS
Base: traffic after 24 to 48 hours, depending
MS-polymer on room climate on job site
Packaging: Shelf life:
WA-FL-092 - 3.0 gal 1 year in unopened container at 70 °F /
21 °C
LOBA and Wakol – Connected Systems
Base:
polyurethane resin and hardener
Packaging:
WA-FL-074 - Component A 1.0 gal
WA-FL-074 - Component B 27.1 US.fl.ozYou can also read
