The Barista Touch - Breville
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
the Barista Touch™ EN INSTRUCTION BOOK FR-CA MANUEL D'INSTRUCTIONS ES-MX MANUAL DE INSTRUCCIONES
IMPORTANT
Contents SAFEGUARDS
READ ALL
2 Breville Recommends INSTRUCTIONS BEFORE
Safety First USE AND SAVE FOR
8 Components FUTURE REFERENCE
11 Assembly
12 Functions • Carefully read all
23 Care & Cleaning instructions before
27 Troubleshooting operating and save for
future reference.
• Do not touch hot
surfaces. Use handles or
knobs as advised in this
instruction book.
• To protect against
fire, electric shock and
injury to persons do not
immerse the power cord,
BREVILLE plug, or appliance itself
RECOMMENDS in water or other liquids.
SAFETY FIRST • Close supervision is
necessary when any
At Breville we are very safety
conscious. We design and appliance is used by
manufacture consumer or near children.
products with the safety of you, • If the appliance is to be:
our valued customer, foremost
in mind. In addition we ask - left unattended
that you exercise a degree of - cleaned
care when using any electrical - moved
appliance and adhere to the - assembled or
following precautions. - stored
2• Always switch off the • Do not let the power cord
appliance by pressing hang over the edge of a
the POWER button to table or counter-top, or
off and unplug from the touch hot surfaces.
power outlet. • Do not place the
• Unplug from outlet when appliance near the edge
not in use and before of a table or counter-top.
cleaning. Allow to cool Ensure the surface is level,
before putting on or clean and free of water
taking off parts and before and other substances.
cleaning the appliance. • Do not place the
appliance on or near a hot
• It is recommended to
gas or electric burner.
regularly inspect the Do not place it in, or allow
appliance and power cord. it to come in contact with
Do not use the appliance a heated oven.
if there is damage to
• Do not operate the
the power cord or plug, appliance if it is in
or after the appliance
an enclosed space,
malfunctions or has been
or within a cupboard.
damaged in any way.
Immediately stop • This appliance is
use and call Breville recommended for
Consumer Support. household use only.
Do not use this appliance
• The use of accessory
for anything other than its
attachments not
intended use. Do not use
recommended by Breville
outdoors. Do not use in
may result in fire, electric
moving vehicles or boats.
shock or injury to persons.
3NOTICE TO CUSTOMERS the household where
REGARDING MEMORY the product is used. If
STORAGE you have any questions
• Please note that in order to regarding the memory
better serve our customers, storage chip please
internal memory storage contact us at
has been imbedded into privacy@breville.com
your appliance. This
SPECIFIC
memory storage consists INSTRUCTIONS
of a small chip to collect FOR BES880
certain information about
your appliance including • It is recommended to plug
the frequency of use of the espresso machine
the appliance and the into a properly grounded
manner in which your and dedicated circuit,
appliance is being used. separate from other
In the event your appliance electrical appliances.
is returned for service, • Avoid contact with
the information collected moving parts.
from the chip enables us • Check bean hopper
to quickly and efficiently for presence of foreign
service your appliance. objects before using.
The information collected • Use only cold water in
also serves as a valuable the water tank. Do not
resource in developing use any other liquids. Do
future appliances to better not use highly filtered,
serve the needs of our demineralized or distilled
consumers. The chip does water as this may affect
not collect any information the taste of the coffee
regarding the individuals and how the espresso
who use the product or machine operates.
4• Ensure the portafilter • Caution must be used
is firmly inserted and during descaling as hot
secured into the group steam may be released.
head before starting an Before descaling, turn
extraction. Never remove off the machine, allow
the portafilter during the to cool for at least 1 hour
extraction process. and ensure the drip tray is
empty and fully inserted.
WARNING For instructions, refer
To avoid the risk of injury, to 'Descale', page 23.
do not open the brew • Do not attempt to
chamber during the open or service the
brew process. espresso machine.
• Use caution after milk • For any maintenance
texturing as the auto other than cleaning,
purge function will purge call Breville Consumer
hot steam when the steam Support or visit a Breville
wand is lowered. Authorized Servicer.
5SPECIFIC SHORT CORD
INSTRUCTIONS FOR INSTRUCTIONS
WATER FILTER Your Breville appliance is
• Filter cartridge should fitted with a short power
be kept out of reach cord to reduce personal
of children. injury or property damage
• Store filter cartridges resulting from pulling,
in a dry place in the tripping or becoming
original packaging. entangled with a longer
• Protect cartridges from cord. Longer detachable
heat and direct sunlight. power cords or extension
• Do not use damaged cords are available and
filter cartridges. may be used if care is
exercised. If an extension
• Do not open cord is used, (1) the marked
filter cartridges. electrical rating of the
• If you are absent for a cord set or extension cord
prolonged period of time, should be at least as great
empty the water tank and as the electrical rating of
replace the cartridge. the appliance, (2) the cord
should be arranged so
that it will not drape over
the counter-top or table
where it can be pulled
on by children or tripped
over unintentionally and
(3) the extension cord
must include a 3-prong
grounding plug.
6BREVILLE ASSIST® PLUG
Your Breville appliance
comes with a unique
Assist® Plug, conveniently
designed with a finger hole
to ease removal from the
power outlet.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
7Components
A
B
C
D
E K
F
G L
H M
I
N
O
P
Q
J
A. ½lb bean hopper J. Removable wet & dry coffee separator
With locking system for easy removal, drip tray
storage and transfer of coffee beans. With Empty Me! tray full indicator.
B. Integrated conical burr grinder K. 68 fl.oz (2L) removable water tank
C. Touch screen control panel With replaceable water filter to reduce
Displays current settings and provides impurities and scale.
touch interface. L. Group Head
D. GRIND SIZE selector M. Dedicated hot water outlet
Espresso grind settings from fine to coarse. N. Extra-tall cup clearance for tall mugs
E. POWER button O. Easy clean steam wand
F. Integrated removable 54mm tamper For automatic milk texturing.
G. Grind outlet P. Milk temperature sensor
H. Hands free grinding cradle Q. Storage tray (located behind drip tray)
I. 54mm stainless steel portafilter Houses accessories when not in use.
With commercial style spouts.
8All parts of the Barista Touch™
that come into contact with coffee,
water and milk are BPA Free.
1
6
4
5
2
9
8
3
7
10
11
ACCESSORIES
1. Stainless steel milk jug 6. Water filter and holder
2. Cleaning disc 7. Cleaning brush
3. Cleaning tablets 8. The Razor™ precision dose trimming tool
4. Dual Wall filter baskets (1 cup & 2 cup) 9. Steam wand cleaning tool
Use with pre-ground coffee. 10. Water hardness test strip
5. Single Wall filter baskets 11. Descaling powder
(1 cup & 2 cup) Use when grinding fresh
whole coffee beans.
Rating Information
120 V~ 60 Hz 1680 W
9Barista Touch
Features
COLOR TOUCH SCREEN HANDS FREE GRINDING
CONTROL PANEL Auto stop for hands free grinding directly into
Swipe & Select from the drinks menu. the portafilter.
Adjust your shot volume, milk texture
or milk temperature, then save it as your THE RAZOR™ DOSE
personal favorite. TRIMMING TOOL
Patented twist blade trims down the puck
AUTOMATIC HANDS FREE MILK to the right level for precision dosing and a
TEXTURING consistent extraction.
Automatically textures milk to the selected
temperature and style from silky smooth ADJUSTABLE TEMPERATURE
latté to creamy cappuccino. Automatic purge CONTROL
removes residual milk from the steam wand For optimum coffee flavor.
when returned to the downward position.
PID TEMPERATURE CONTROL
RAPID HEAT UP
Electronic PID temperature control for
Innovative heating system achieves ideal increased temperature stability.
extraction temperature in 3 seconds.
INSTANT HOT WATER
INTEGRATED CONICAL
BURR GRINDER Dedicated hot water outlet for making
Americanos and pre-heating cups.
Stainless steel conical burrs maximize
ground coffee surface area for a full espresso LOW PRESSURE PRE-INFUSION
flavor. Upper and lower burrs are removable
for cleaning. Applies low water pressure at the start of
the extraction to gently expand grinds for
ADJUSTABLE GRIND SIZE an even extraction.
Espresso grind settings from fine to coarse for VOLUMETRIC CONTROL
optimal extraction.
Preset 1 & 2 cup volumes, manual over-ride or
ADJUSTABLE GRIND AMOUNT programmable shot volumes.
Adjust the amount of fresh ground coffee DRY PUCK FEATURE
dosed into the filter basket to suit the fineness
or coarseness of the grind. Removes excess water from the ground coffee
in the filter basket after extraction for easy
AUTOMATIC DOSING disposal of the coffee puck.
Use the FILTER SIZE button to tell the
machine if you are using a 1 CUP or 2 CUP
filter basket. The grinder will dispense the
required amount of ground coffee for a single
or double cup dose.
10Assembly
BEFORE FIRST USE • Insert the filter into the two parts of the
filter holder.
Machine Preparation • To install the assembled filter holder into the
Remove and discard all labels and packaging water tank, align the base of the filter holder
materials attached to your espresso machine. with the adapter inside the water tank.
Ensure you have removed all parts and Push down to lock into place.
accessories before discarding the packaging.
Remove the packaging and the plastics bags
containing the water filter and water filter
holder. Clean parts and accessories (water tank,
portafilter, filter basket, jug) using warm water
and a gentle dish washing liquid. Rinse well
then dry thoroughly.
INSTALLING THE WATER FILTER
• Remove the water filter and water filter holder
from the plastic bag.
• Soak the filter in cold water for 5 minutes.
• Wash the filter holder with cold water.
• Fill the water tank with cold water before
sliding back into position at the back of the
machine and locking into place.
NOTE
Replacing the water filter after three months
• Set the reminder for next month of or 10.6 USgal / 40L will reduce the need to
replacement. We recommend to replace the descale the machine. Filter can be purchased
filter after 3 months. at Breville webpage.
NOTE
DO NOT use highly filtered, demineralised or
distilled water in this machine. This may affect
the taste of the coffee.
11Functions
FIRST USE GRINDING OPERATION
1. Press POWER button to turn the Insert bean hopper into position on-top of the
machine on. machine. Turn dial to lock into place.
2. Follow the instructions on screen to guide Fill hopper with fresh beans.
you through first use setup.
3. After completing setup, the machine will
tell that it is ready to use.
Your Barista Touch is now ready
Select the guide to find out more about your Barista Touch
or exit to proceed to your drink selection
TIP
Exit Guide
We recommend quality 100% Arabica beans
with a 'Roasted On' date stamped on the bag,
The machine is now in STANDBY mode.
not a 'Best Before' or 'Use By' date. Coffee beans
4. Touch "Guide" and the machine will guide are best consumed between 5–20 days after
you step by step to make your first coffee. the 'Roasted On' date. Stale coffee may pour too
Touch the and go to the Drinks Menu or quickly from the portafilter spouts and taste
< to repeat the Setup. To repeat the Guide at bitter and watery.
any time, go to Settings Menu.
NOTE
If your water hardness is either 4 or 5 when
tested, we strongly recommend you change to
an alternate water source.
Filtered, bottled spring or mineral water will
extend both the life of your built-in filter and
descale intervals as well as superior taste.
Please ensure to test the water hardness of the
alternative water source you've chosen and
input into the machine accordingly. Avoid
using overly filtered water, like RO water
unless some mineral content is being added
back to the final water. Never use distilled
water, or water with no or low mineral content
as this will affect both the taste.
12DRINK SELECTION
To enter Drinks Menu screen, touch the Home icon . Swipe & select your drink.
Touch the 'Help & Tip' icon to see Barista Touch™ Guide.
Select your drink
Espresso Americano Latte Flat White Cappuccino
NOTE
Please keep the touch screen dry and clean to ensure that the machine functions properly.
DRINK SCREEN
In this screen, you can customize your drink by touching the oval shaped buttons. You cannot
adjust the Grind Size by touching the button, use the dial on the side of the machine.
Drink chosen
'Home' icon Cappuccino 'Setting' icon
Grind Brew Milk
Grind duration Milk temperature
(single / 15s Double 150º 4
double / custom) Milk froth level
Grind size 14 Hot Water
Brew setting: touch this button to scroll
Espresso - single shot / double shot / custom extraction time
Americano - small / medium / large
13SETTING GRIND SIZE Manual Dosing
• If you prefer to manually dose, with the
Selecting Your Filter Basket
portafilter inserted in the grinding cradle,
Choose and insert the Filter Basket into the push and hold the portafilter to engage the
Portafilter for the number of coffees or strength grinding activation switch. Continue holding
you are making. Use the Single Cup Filter until the desired amount of ground coffee
Basket for making a single cup or a weaker has been dosed.
tasting espresso. Use the Double Cup Filter • To stop grinding, release the portafilter.
Basket for making 2 cups or a stronger tasting This will release the grinding activation
espresso, usually for mugs or larger cups. switch and stop the grinding function.
See 'TIPS' for more detailed guide.
In the touchscreen, select the chosen filter Tamping the Ground Coffee
basket by touching the toggle option under the • Once grinding is complete, carefully
'Grind' button. withdraw the portafilter from the
The grind size will affect the rate of water flow grinding cradle.
through the coffee in the filter basket and the • Tap the portafilter several times to collapse
flavor of the espresso. When setting the and distribute the coffee evenly in the
grind size, it should be fine but not too fine filter basket.
and powdery. When trying a new coffee, it may
• Tamp down firmly using approx. 30–40lbs
take 2 or 3 tries to identify the correct grind
(15–20kgs) of pressure. The amount of
size for your coffee.
pressure is not as important as consistent
There are numbered settings on the pressure every time.
touchscreen. The smaller the number,
• As a guide to dose, the top edge of the metal
the finer the grind size. The larger the
cap on the tamper should be level with the
number, the coarser the grind size.
top of the filter basket AFTER the coffee has
Automatic Dosing been tamped.
• Ensure the hopper is locked into position and
is filled with fresh coffee beans.
• Ensure the filter basket is completely dry
before placing the portafilter into the
grinding cradle.
• Touch the 'Grind' button once, or push and
release the portafilter to engage the grinding
activation switch. Then allow fresh ground
coffee to fill the portafilter.
• Grinding will automatically stop, however if
you wish to stop grinding before the cycle has Trimming the Dose
finished, push and release the portafilter. The Razor™ precision dose trimming tool
allows you to trim the puck to the right level for
NOTE a consistent extraction.
It is normal for the portafilter to appear
overfilled with ground coffee.
the Razor™
Precision dose trimming tool
14• Insert the Razor™ dose trimming tool into ESPRESSO EXTRACTION
the filter basket until the shoulders of the tool
Align portafilter handle with the INSERT
rest on the rim of the basket. The blade of
position on the group head. Lift to insert
the dose trimming tool should penetrate the
portafilter into the group head and rotate
surface of the tamped coffee.
towards the LOCK TIGHT position until
• Rotate the Razor™ dose trimming tool back resistance is felt.
and forth while holding the portafilter on
Touch the 'Brew' button on the display to start
an angle over a knock box to trim off excess
extraction. You can switch between single shot,
coffee grinds. Your filter basket is now dosed
double shot or Custom by touching the 'Single',
with the correct amount of coffee.
'Double' or Custom button. The duration times
are preset, but can be customized.
Brew Brew Brew
22s
Single Double Custom
MANUAL OVERRIDE
Press and hold the 'Brew' button (approx 2secs)
• Wipe excess coffee from the rim of the filter to enter manual extraction mode. Touch the
basket to ensure a proper seal is achieved in Brew button to start the extraction, touch the
the group head. Brew button to stop the extraction.
Purging the Group Head
NOTE
Before placing the portafilter into the group
head, run a short flow of water through the • The amount of espresso extracted in the cup
group head by touching the 'Brew' button. will vary depending on your grind size and
This will stabilize the temperature prior grind amount settings.
to extraction. • Touching the 'Brew' button during a
preset shot volume will immediately stop
Inserting the Portafilter the extraction.
Place the portafilter underneath the group head • For optimal flavor when using a 1 CUP filter
so that the handle is aligned with the INSERT basket, you should extract approx. 1oz / 30ml.
position. Insert the portafilter into the group When using a 2 CUP filter basket, you should
head and rotate the handle towards the center extract approx. 2oz / 60ml.
until resistance is felt.
LOCK TIGHT
15TEXTURING MILK
NOTE
Different brands and types of milk and milk
alternatives will texture differently. You may Prior to texturing milk, it is recommended to
need to adjust the froth level accordingly. Start momentarily purge the steam wand by first
with fresh cold milk. Fill milk jug to below the touching the 'Milk' button. Touching the button
spout position. Lift steam wand and insert into again will stop steam delivery.
milk jug. Lower steam wand, ensuring it is fully
down. The milk jug should rest on the milk
MANUAL MILK TEXTURING
temperature sensor located on the drip tray Auto milk texturing and auto shut-off are
and milk should cover the ring around steam disabled during manual milk texturing mode.
wand tip. The toggle button under the 'Milk' Lift the steam wand. Start frothing by touching
button will show you whether you placed the the button. When frothing is done, touch the
milk jug correctly. Milk button to stop.
Wipe the wand & tip with a clean damp cloth.
Lower steam wand to the down position and
the wand will automatically purge.
CAUTION: BURN HAZARD
MAX
MIN
Pressurized steam can still be released, even
after machine has been switched off.
Children must always be supervised.
NOTE
• When the machine creates steam, a pumping
MILK MUST noise can be heard. This is the normal
COVER THIS operation of the Italian pump.
RING
• After 90 seconds of continuous steaming,
the machine will automatically disable the
steam function.
• Use exclusively the stainless steel milk jug
NOTE included in the pack to froth milk. The use of
Use the indicator on the screen for the correct container made of glass or plastic material to
milk jug position. froth milk may lead to dangerous conditions.
AMERICANO
Under the 'Milk' button, temperature level
and froth level are displayed. They are preset There are 3 preset Americano settings –
based on the drink you've chosen but you can Small (6oz / 180ml), Medium (8oz / 240ml),
customize by touching those options. and Large (12oz / 360ml). Grind dose &
tamp your portafilter & insert into the group
To start, touch the 'Milk' button. The screen will head. Position your cup underneath the
display the temperature of the milk as it heats. portafilter spouts & the hot water spout. The
Milk texturing will stop automatically when the hot water is delivered first, and espresso will be
selected milk temperature is reached. extracted after that.
Lift steam wand to remove milk jug. Wipe the
wand & tip with a clean damp cloth. Lower
steam wand to the down position and the wand
will automatically purge.
16HOT WATER Language and units
The HOT WATER function can be used to Switch the language between English and
pre-heat cups or add hot water manually. French, and unit between °F and °C.
To start & stop hot water, touch 'Hot Water' on
Clean Cycle
the screen.
Hot water limit is approximately 90 seconds. The Cleaning Cycle cleans the shower screen
Depending on the size of your cup, you and back-flushes the group head.
may need to touch the 'Hot Water' button to
Cleaning Steam Wand
stop pouring.
This will show how to clean the steam wand
NOTE to remove any blockage for better steaming
performance.
You cannot run hot water and extract espresso
at the same time. Descale Cycle
ADDING NEW DRINK Descaling prevents excess mineral and scale
build-up. A pop-up message will let you know
Touch 'Add New' in the menu screen to create when it is time for descaling.
a customized drink. You can adjust parameters
based on a standard style and save your own. Brew Temperature
It allows you to adjust the recommended
extraction temperature.
+ Default Milk Temperature
It allows you to adjust default temperature level
on all milk base drinks.
Add New
Water Hardness
Alternatively, after manually adjusting It is to test water to set how often you need to
parameters touch the small icon to save descale the machine.
the current setting.
Screen Brightness
TIPS
You can adjust brightness of your touch screen.
Ensure the drip tray is firmly pushed in
place and emptied whenever the Empty Me! Sound Volume
indicator is displayed. You can adjust volume for alerts and reminders.
AUTO OFF MODE Demo Mode
The machine automatically switches to It is for on-screen Barista Touch™
AUTO OFF mode after 30 minutes. demonstration sequence.
SETTINGS Factory Reset
To enter settings menu, touch the icon Use this function to reset all programmable
on the upper right of the screen. values back to the factory settings and delete all
custom drinks.
Quick Start Guide
Machine will guide you on screen, step by step
to make an actual coffee.
17Tips
PRE-HEATING Dual Wall Filter Baskets
Use Dual Wall filter baskets if using
Heating your cup or glass
pre-ground coffee.
A warm cup will help maintain the coffee’s Dual Wall filter baskets regulate the pressure
optimal temperature. Pre-heat your cup by and help to optimize the extraction regardless
rinsing with hot water from the hot water outlet of the grind, dose, tamp pressure or freshness.
and place on the cup warming tray.
Heating the portafilter and filter basket
A cold portafilter and filter basket can
reduce the extraction temperature enough to
significantly affect the quality of your espresso.
Always ensure the portafilter and filter basket
are pre-heated with hot water from the hot
water outlet before initial use. 1 CUP 2 CUP
NOTE NOTE
Always wipe the portafilter and filter basket dry • Regardless of whether you use Single Wall or
before dosing with ground coffee as moisture Dual Wall filter baskets, use the 1 CUP basket
can encourage ‘channeling’ where waterby- when brewing a single cup and the 2 CUP
passes the ground coffee during extraction. basket when brewing two cups or a stronger
single cup or mug.
SELECTING A FILTER BASKET • You will need to adjust the grind amount and
size if switching from a single basket to a
Single Wall Filter Baskets double basket, or vice versa.
Use Single Wall filter baskets if grinding fresh
whole coffee beans.
The provided filter baskets are designed for:
Single Wall filter baskets allow you to
1 CUP basket = approx. 8-11g.
experiment with grind, dose and tamp to create
a more balanced espresso. 2 CUP basket = approx. 16-19g.
NOTE
You may need to experiment with how much
coffee is inserted into the filter basket or
how long the grinder needs to run to achieve
the correct dose. For example, when using
a finer espresso grind with the Single Wall
1 CUP 2 CUP filter baskets, you may need to increase the
grind amount to ensure the filter basket is
correctly dosed.
18THE GRIND EXTRACTING ESPRESSO
If grinding coffee beans, the grind size should • Place pre-warmed cup(s) beneath the
be fine but not too fine. The grind size will portafilter and touch the 'Brew' button for the
affect the rate at which the water flows through desired volume.
the ground coffee in the filter basket and the • Due to pre-infusion time, the espresso will
taste of the espresso. not start to flow immediately.
If the grind is too fine (looks like powder and A great espresso is about achieving the perfect
feels like flour when rubbed between fingers), balance between sweetness, acidity and
the water will not flow through the coffee even bitterness. The flavor of your coffee will depend
when under pressure. The resulting espresso on many factors, such as the type of coffee
will be OVER EXTRACTED, dark in color and beans, degree of roast, freshness, coarseness
bitter in flavor. or fineness of the grind, dose of ground coffee,
If the grind is too coarse the water will flow and tamping pressure.
through the ground coffee in the filter basket Experiment by adjusting these factors just one
too quickly. The resulting espresso will at a time to achieve the taste of your preference.
be UNDER EXTRACTED and lacking in
color and flavor.
19EXTRACTION GUIDE
CORRECT EXTRACTION UNDER EXTRACTION OVER EXTRACTION
• Flow starts after 8–12 secs • Flow starts after 1-6 secs • Flow starts after 15 secs
• Flow slow like warm honey • Flow fast like water • Flow drips or not at all
• Crema is golden brown with a fine • Crema is thin and pale • Crema is dark and spotty
mousse texture • Espresso is pale brown • Espresso is very dark brown
• Espresso is dark brown • Tastes bitter/sharp, weak and watery • Tastes bitter and burnt
AFTER EXTRACTION SOLUTIONS SOLUTIONS
REMOVE USED
GRINDS TURN Grind TURN Grind
Used grinds will form
a coffee 'puck'. If the
puck is wet, refer to 15s 15s
the 'Under Extraction' INCREASE DECREASE
section. GRIND AMOUNT GRIND AMOUNT
Adjust & re-test Adjust & re-test Adjust & re-test Adjust & re-test
RINSE FILTER Tamp using 30–40lbs Tamp using 30–40lbs
Brew BASKET (15–20kgs) of pressure. (15–20kgs) of pressure.
Keep the filter basket The top edge of metal cap The top edge of metal cap
clean to prevent on the tamper should be on the tamper should be
Double blockages. Without level with the top of the level with the top of the
ground coffee in the filter filter basket AFTER filter basket AFTER
tamping. tamping.
LOCK TIGHT
basket, lock the portafilter ALWAYS TAMP TO LINE ALWAYS TAMP TO LINE
into the machine and run Trim the puck to the Trim the puck to the
hot water through by Adjust & re-test right level using the Adjust & re-test right level using the
pressing single or Razor™ precision dose Razor™ precision dose
double cup. trimming tool. trimming tool.
GRIND GRIND DOSE TAMP
OVER EXTRATED Too fine Too much Too heavy
BITTER • ASTRINGENT Use razor to trim
BALANCED Optimum 8-11g (1 cup) 30–40lbs
16-19g (2 cup) (15–20kg)
UNDER EXTRACTED Too coarse Too little Too light
UNDERDEVELOPED • SOUR Increase dose & use razor to trim
20After texturing is complete
HINTS & TIPS
• Tap the jug on the counter-top to collapse
• Fresh, quality coffee beans will give you the any bubbles.
best possible extraction.
• Swirl the jug to polish and re-integrate
• We recommend quality 100% Arabica beans the texture.
with a ‘Roasted On’ date stamped on the bag,
• Pour milk directly into the espresso.
not a ‘Best Before’ or ‘Use By’ date.
• The key is to work quickly, before the milk
• Coffee beans are best consumed between
begins to separate.
5–20 days after the ‘Roasted On’ date.
Ideally only grind directly before the For manual texturing
extraction to maximize flavor.
• Lift the steam wand and insert the steam tip
• Buy coffee beans in small batches to reduce 0.4-0.8 inch / 1-2 cm below the surface of the
the storage time. milk close to the right hand side of the jug at
• Store coffee beans in a cool, dark and dry the 3 o’clock position. Enter manual frothing
container. Vacuum seal if possible. mode & then start frothing by touching the
'Milk' button.
TEXTURING MILK • Keep the tip just under the surface of the
There are two phases to texturing milk. milk until the milk is spinning clockwise,
The first is stretching the milk to aerate it producing a vortex (whirlpool effect).
and the second is swirling the milk to make • With the milk spinning, slowly lower the jug.
it silky smooth. These two operations should This will bring the steam tip to the surface of
blend into one. the milk & start to introduce air into the milk.
• Always start with fresh cold milk. You may have to gently break the surface of
the milk with the tip to get the milk spinning
• Fill milk jug to below the spout position.
fast enough.
At a minimum, there should be enough milk
to cover the ring around steam wand. • Keep the tip at or slightly below the surface,
continuing to maintain the vortex. Texture
• To remove any condensed water from the
the milk until sufficient volume is obtained.
system, ensure the steam wand is in the down
position over the drip tray then touch the • Lift the handle of the jug to lower the tip
Milk button, allow steam to flow for a few beneath the surface, but keep the vortex
seconds, then touch the Milk button to stop. of milk spinning. Use the touch screen
to monitor the milk temperature. We
• When texturing milk automatically, ensure
recommend 130°F-150°F / 55°C–65°C.
the steam wand is fully down.
• Touch the Milk button to stop steaming
HINTS & TIPS BEFORE lowering the jug and taking the tip
out of the milk.
For optimum milk texturing performance it
is critical that the holes around the steam tip
are clear. Even partially blocked holes may
affect the ability of the steam wand to produce
sufficient foam.
Always wipe the wand and tip with a damp
cloth BEFORE returning the wand to the down
position. Wiping the wand will remove the
majority of milk and allow the automatic purge
feature to more effectively remove any
residual milk.
21ADJUSTING CONICAL BURRS
Some types of coffee may require a wider grind range to achieve an ideal extraction or brew.
A feature of your Barista Touch™ is the ability to extend this range with an adjustable upper burr.
We recommend making only one adjustment at a time.
1 2 3 4 5 6
PUSH
AIR TIGHT
CONTAINER
Unlock hopper Hold hopper over container & turn Align hopper Run grinder Remove hopper Remove upper
dial to release beans into container into position until empty burr
7 8 9 10 11 12 13
FINE
FINE
FINE COARS FINE COARS
E 6 E
5 7
COAR
COAR
4 8
SE
SE
Remove wire Move adjustable Align the number Insert wire Push upper burr Lock upper burr Align hopper
handle from both top burr, 1 number, with the handle handle from both firmly into into position
sides of the burr coarser or finer opening sides of the burr position
14 15
Lock hopper Check your
extraction
22Care & Cleaning
COLOR TOUCH SCREEN DISPLAY
Please keep the touch screen dry and clean to ensure that the machine functions properly.
REPLACING THE WATER FILTER
1 2 3 4 5 6 !
Set current Soak Filter Assemble Ensure parts Install filter Install water Replace filter
month for 5 min water filter are connected in tank tank after 90 days
parts or after 40L
The provided water filter helps prevent scale build-up in and on many of the inner functioning
components. Replacing the water filter after three months or 10.6 USgal / 40L will reduce the need
to descale the machine.
The limitation of 10.6 USgal / 40L is based on water hardness level 4. If you are in level 2 area,
you can increase this to 16 USgal / 60L.
NOTE
To purchase water filters visit Breville webpage.
CLEANING CYCLE
There will be a message prompt when a cleaning cycle is required. This is a back-flushing cycle
and is separate from descaling. Follow the instruction on the screen.
DESCALING
After regular use, hard water can cause mineral build up in and on many of the inner functioning
components, reducing the brewing flow, brewing temperature, power of the machine, and taste of
the espresso. Even if you used the provided water filter, we recommend you to descale if there is
scale build-up in the water tank.
Go to 'Settings' and select 'Descale cycle'. Follow the instructions on the screen.
WARNING
Do not immerse power cord, power plug or appliance in water or any other liquid. The water tank
should never be removed or completely emptied during descaling.
23CLEANING THE CONICAL BURR GRINDER
This grinder cleaning cycle removes oil build-up on the burrs which can impede performance.
1 2 3 4 5 6 7
PUSH
Unlock hopper Empty hopper Replace hopper Lock hopper Run grinder Unlock hopper Remove hopper
empty
8 9 10 11 12
IGN LOC
AL K
Unlock top burr Remove top burr Clean top burr Clean lower Clean chute
with brush burr with brush with brush
ADVANCED CLEANING FOR THE CONICAL BURR GRINDER
This step is only required if there is a blockage between the grinding burrs and the grinder outlet.
1 2 3 4 5 6 7
TURN TURN
1
SPRING 2
WASHER
3
FLAT
WASHER
1. GRIND FAN
LOOSEN NUT 2. METAL WASHER
3. FELT WASHER
Remove hopper Set 'GRIND SIZE' Use 10mm socket. Set 'GRIND SIZE' Unlock & remove Remove nut, spring Remove grind fan
to '1' (finest) Rotate 'Clockwise' to '30' (coarsest) top burr & flat washer. & washers
to loosen the nut Carefully remove using long-nose
only lower burr pliers
8 9 10 11 12 13 14
TURN
3
SPRING
2 WASHER
1 FLAT
WASHER
1. FELT WASHER
2. METAL WASHER
3. GRIND FAN
TIGHTEN NUT
Unblock the grinds Clean chute Insert washers & Insert lower burr Rotate 'Counter- Insert & lock top Set 'GRIND SIZE'
exit chute using the with brush grind fan using (drive pin & Clockwise' to burr to '15'. Replace &
brush or a pipe long-nose pliers cavity to align). tighten nut lock hopper
cleaner Insert flat washer
& spring washer
WARNING
Care should be taken as the grinder burrs are extremely sharp.
24CLEANING THE STEAM WAND CLEANING THE DRIP &
• The steam wand should always be cleaned STORAGE TRAY
after texturing milk. Wipe the steam wand • The drip tray should be removed, emptied
with a damp cloth. and cleaned at regular intervals, particularly
• If any of the holes in the tip of the steam when the drip tray full indicator is showing
wand become blocked, it may reduce frothing EMPTY ME!
performance. • Remove the grid from the drip tray.
• Go to 'Settings' > 'Steam wand cleaning' and Lift the coffee grind separator and dispose
follow the guide on the screen. of any coffee grounds. The EMPTY ME!
indicator can also be removed from the drip
CLEANING THE FILTER BASKETS tray by pulling upwards to release the side
AND PORTAFILTER latches. Wash all parts in warm soapy water
with a soft cloth. Rinse and dry thoroughly.
• The filter baskets and portafilter should be
rinsed under hot water immediately after use • The storage tray (located behind the drip
to remove all residual coffee oils. tray) can be removed and cleaned with a soft,
damp cloth. Do not use abrasive cleansers,
• If any of the holes in the filter basket become pads or cloths which can scratch the surface.
blocked, use the pin on the end of the
provided cleaning tool to unblock the hole(s).
NOTE
• If the hole(s) remain blocked, dissolve a
cleaning tablet in hot water and soak filter All parts should be cleaned by hand using
basket and portafilter in solution for approx. warm water and a gentle dish washing liquid.
20 minutes. Rinse thoroughly. Do not use abrasive cleansers, pads or cloths
which can scratch the surface. Do not clean
CLEANING THE SHOWER SCREEN any of the parts or accessories in
• The group head interior and shower screen the dishwasher.
should be wiped with a damp cloth to remove
any ground coffee particles. CLEANING THE OUTER HOUSING &
• Periodically purge the machine. Place an CUP WARMING TRAY
empty filter basket and portafilter into the The outer housing and cup warming tray can
group head. Touch the 'Brew' button and be cleaned with a soft, damp cloth. Polish with
run a short flow of water to rinse out any a soft, dry cloth. Do not use abrasive cleansers,
residual coffee. pads or cloths which can scratch the surface.
STORING YOUR MACHINE
Before storing, press the POWER button to
switch the machine off and remove the plug
from the power outlet. Remove unused beans
from the hopper, clean the grinder (see
page 24), empty the water tank and the drip
tray. Ensure the machine is cool, clean and dry.
Insert all accessories into the storage tray.
Store upright. Do not place anything on top.
WARNING
Do not immerse power cord, power plug or
appliance in water or any other liquid.
25REPLACING THE SILICONE SEAL 6. Remove the silicone seal with your fingers
or a pair of long-nose pliers. Insert the
Over time, the silicone seal surrounding the
new seal, flat side first, so the ribbed side
shower screen will need to be replaced to
is facing you.
ensure optimum brewing performance.
1. Press the POWER button to switch the
machine off and unplug the cord from the
power outlet.
2. Carefully remove the water tank and drip
tray, taking particular care if they are full.
3. Using a skewer or similar, clean the center
of the screw of any residual coffee.
4. Insert a flat head screwdriver into the center
of the screw. Turn counter-clockwise to
loosen the screw.
Clean center of screw
before inserting flat head 7. Re-insert the shower screen, then the screw.
screwdriver.
With your fingers, turn the screw clockwise
for 2-3 revolutions then insert flat head
screwdriver to tighten until the screw
is flush with the shower screen. Do not
overtighten screw.
8. Re-insert the drip tray and water tank.
Contact Breville Consumer Support or visit the
Breville webpage for replacement silicone seals
or for advice.
5. Once loosened, carefully remove and retain
the screw and the stainless steel shower TRANSPORTING AND STORING
screen. Make note of the side of the shower Press the POWER button to switch the
screen that is downwards. This will make machine off and remove the plug from the
re-assembly easier. Wash the shower screen power outlet. Remove unused beans from the
in warm soapy water, then dry thoroughly. hopper, clean the grinder, empty the water
tank and the drip tray. Ensure the machine is
cool, clean and dry. Insert all accessories into
the storage tray. Store upright. Do not place
anything on top.
26Troubleshooting
PROBLEM POSSIBLE CAUSES EASY SOLUTION
Water does not flow Water tank is empty. Fill tank.
from the group head.
Water tank is not fully inserted and Push water tank down completely to
No hot water.
locked into position. lock into place.
Machine needs to be descaled. Perform descale cycle.
Coffee is ground too finely and/ See below, ‘Espresso only drips from the
or too much coffee in filter basket portafilter spouts or not at all’.
and/or over tamping and/or filter
basket is blocked.
Espresso only drips Coffee is ground too finely. Use slightly coarser grind.
from the portafilter Refer to ‘Setting the Grind Size’, page 14
spouts or not at all. and ‘Over Extraction’, page 20.
Too much coffee in the filter basket. Lower dose of coffee.
Refer to ‘Dosing’, page 14 and
‘Over Extraction’, page 20.
After tamping, trim the coffee dose
using the Razor™ dose trimming tool.
Coffee tamped too firmly. Tamp between 30–40lbs or
15–20kg of pressure.
Water tank is empty. Fill tank.
Water tank is not fully inserted and Push water tank down completely to
locked into position. lock into place.
The filter basket may be blocked. Use the pin on the end of the provided
cleaning tool to unblock the hole(s).
If the hole(s) remain blocked, dissolve
a cleaning tablet in hot water and
soak filter basket and portafilter in
solution for approx. 20 minutes.
Rinse thoroughly.
Machine needs to be descaled. Perform descale cycle.
Water doesn't come Water tank is empty or water level Fill tank.
through (the machine is below MIN.
makes loud noise).
There is an error on Perform factory reset ('Settings' >
purging setting. 'Factory Reset').
27PROBLEM POSSIBLE CAUSES EASY SOLUTION
Espresso runs out Coffee is ground too coarsely. Use slightly finer grind.
too quickly. Refer to ‘Setting the Grind Size’, page 14
and ‘Under Extraction’, page 20.
Not enough coffee in the Increase dose of coffee.
filter basket. Refer to ‘Dosing’, page 14 and ‘Under
Extraction’, page 20. Tamp then use the
Razor™ dose trimming tool to trim off
excess coffee.
Coffee tamped too lightly. Tamp between 30–40lbs or
15–20kg of pressure.
Espresso runs out around Portafilter not inserted Ensure portafilter is completely inserted
the edge of the portafilter. in the group head correctly. and rotated until resistance is felt.
There are coffee grounds around Clean excess coffee from the rim of
the filter basket rim. the filter basket to ensure a proper seal
in group head.
Too much coffee in the filter basket. Lower dose of coffee.
Refer to ‘Dosing’, page 14.
After tamping, trim the coffee dose
using the Razor™ dose trimming tool.
The silicone seal surrounding the Refer to ‘Replacing the Silicone Seal’,
shower screen needs to be replaced page 26.
to ensure the portafiler is properly
secured into the group head.
No steam. Machine has not reached operating Allow time for the machine to reach
temperature. operating temperature.
Water tank is empty. Fill tank.
Water tank is not fully inserted and Push water tank down completely
locked into position. to lock into place.
Machine needs to be decalcified. Perform descale cycle.
Steam wand is blocked. Refer to ‘Cleaning the Steam
Wand’, page 25.
Pulsing/pumping sound The machine is carrying out the No action required as this is the normal
while extracting espresso normal operation of the pump. operation of the machine.
or steaming milk.
Water tank is empty. Fill tank.
Water tank is not fully inserted and Push water tank down completely to
locked into position. lock into place.
28PROBLEM POSSIBLE CAUSES EASY SOLUTION
Coffee not hot enough. Cups not pre-heated. Rinse cups under hot water outlet and
place on cup warming tray.
Portafilter not pre-heated. Rinse portafilter under hot water outlet.
Dry thoroughly.
Milk not hot enough Make sure sensor is in contact. Adjust
(if making a cappuccino milk temperature setting on screen..
or latté etc).
Water temperature needs Increase the brew temperature in
to be adjusted. 'Settings' menu.
No crema. Coffee tamped too lightly. Tamp between 30–40lbs or
15–20kg of pressure.
Coffee is ground too coarsely. Use slightly finer grind.
Refer to ‘Setting the Grind Size’, page
142 and ‘Under Extraction’, page 20.
Coffee beans or pre-ground coffee If grinding fresh whole coffee beans,
are not fresh. use freshly roasted coffee beans with
a ‘Roasted On’ date and consume
between 5–20 days after that date.
If using pre-ground coffee, use within a
week of grinding.
The filter basket may Use the pin on the end of the provided
be blocked. cleaning tool to unblock the hole(s).
If the hole(s) remain blocked, dissolve
a cleaning tablet in hot water and
soak filter basket and portafilter in
solution for approx. 20 minutes.
Rinse thoroughly.
Single Wall filter baskets are being Ensure you use Dual Wall filter baskets
used with pre-ground coffee. with pre-ground coffee.
Water leaking. Auto purge feature. Immediately Ensure the drip tray is firmly pushed in
after the espresso, hot water and place and emptied whenever the Empty
steam functions, the machine will Me! indicator is displayed.
purge water into the drip tray. This
ensures the thermocoil is at the
optimal temperature.
Water tank is not fully inserted and Push water tank down completely to
locked into position. lock into place.
The silicone seal surrounding the Refer to ‘Replacing the Silicone Seal’,
shower screen needs to be replaced page 26.
to ensure the portafiler is properly
secured into the group head.
29PROBLEM POSSIBLE CAUSES EASY SOLUTION
Machine is on but The safety thermal-cut out may Press the POWER button to switch the
ceases to operate. have activated due to the pump or machine off and unplug from the power
grinder overheating. outlet. Allow to cool for about
30–60 minutes.
If problem persists, call
Breville Support.
No ground coffee No coffee beans in hopper. Filler hopper with fresh coffee beans.
coming from grinder.
Blocked grinder chamber or chute. Clean and clear grinder chamber
and chute. Refer to ‘Advanced Cleaning
for the Conical Burr Grinder’, page 24.
Water / moisture in grinder Clean and clear grinder chamber and
chamber and chute. chute. Refer to ‘Advanced Cleaning
for the Conical Burr Grinder’, page
24. Ensure burrs are thoroughly dry
before re-assembling. It is possible to
use a hair dryer to blow air into the
grinder chamber.
Too much/too little Grind amount settings are incorrect Use the grind duration button to
ground coffee is for particular grind size. increase or decrease the grind
being delivered to amount. Refer to ‘Dosing’, page 14 and
the filter basket. ‘Extraction Guide’, page 20.
Too much/too little Grind amount and/or grind size Adjust the grind amount and/or grind
espresso is being settings and/or shot volumes size settings. Refer to ‘Setting the Grind
delivered to the cup. require adjustment. Size’, page 14, ‘Dosing’, page 14 and
‘Extraction Guide’, page 20.
Grinder is making Blockage or foreign object Remove hopper, check for debris
a loud noise. in grinder. or blockage. If necessary, clean and
clear grinder chamber and chute.
Refer to ‘Cleaning the Conical Burr
Grinder’, page 24.
30the Barista Touch MC FR-CA MANUEL D'INSTRUCTIONS
Table des IMPORTANTES
matières MESURES DE
SÉCURITÉ
2 Breville vous recommande
la sécurité avant tout LISEZ TOUTES LES
7 Composants INSTRUCTIONS
10 Assemblage AVANT USAGE ET
11 Fonctions CONSERVEZ-LES À
17 Trucs TITRE DE RÉFÉRENCE
22 Entretien et nettoyage
26 Guide de dépannage • Lisez attentivement
toutes les instructions
avant d’utiliser l’appareil
et conservez-les pour
référence future.
• Ne touchez pas les
surfaces chaudes. Utilisez
BREVILLE VOUS les poignées ou boutons,
RECOMMANDE tel que conseillé dans le
LA SÉCURITÉ manuel d'instructions.
AVANT TOUT • Afin de vous protéger
contre le risque de feu,
Chez Breville, la sécurité d'électrocution et de
occupe une place de choix. blessure, n'immergez pas
Nous concevons et fabriquons
des produits de consommation le cordon d'alimentation
sans jamais perdre de vue la ou l'appareil lui-même
sécurité de notre précieuse dans l'eau ou tout
clientèle. De plus, nous autre liquide.
vous demandons d’être très
vigilant lorsque vous utilisez
• Une surveillance étroite
un appareil électrique et de est requise lorsque
respecter les mesures de l'appareil est utilisé par ou
sécurité suivantes: près des enfants.
2• Si l'appareil doit être: aux consommateurs
- laissé sans surveillance de Breville.
- nettoyé • L'usage d'accessoires non
- déplacé recommandés par Breville
- assemblé ou peut causer un risque de
- rangé feu, d'électrocution ou
Éteignez-le toujours en de blessure.
appuyant sur la touche • Ne laissez pas le cordon
MARCHE et débranchez- d'alimentation pendre
le de la prise électrique. d'une table ou d'un
• Débranchez l'appareil de comptoir ou toucher des
la prise murale lorsqu'il surfaces chaudes.
n'est pas utilisé et avant • Ne placez pas l'appareil
de le nettoyer. Laissez-le sur le bord d'une table ou
refroidir avant d'assembler d'un comptoir. Assurez-
ou de retirer les pièces ou vous que la surface est
avant de le nettoyer. de niveau, propre et
• Il est recommandé de exempte d'eau ou de toute
vérifier régulièrement autre substance.
l'appareil et le cordon • Ne placez pas l'appareil sur
d'alimentation. N'utilisez ou près d'un brûleur à gaz
pas l'appareil si le cordon ou électrique. Ne le placez
ou la fiche d'alimentation pas dans un four chaud et
sont endommagés ou ne le laissez pas entrer en
si l'appareil présente contact avec celui-ci.
un problème de • Ne pas utiliser la machine
fonctionnement ou a à café si celle-ci est placée
été endommagé de dans un endroit clos ou
quelque façon. Cessez dans un meuble.
immédiatement l'usage • Cet appareil est
et contactez le Soutien recommandé pour un
3usage domestique une ressource précieuse
seulement. Ne l'utilisez pour le développement
pas à d'autres fins que de futurs appareils
celles prévues. Ne électroménagers afin
l'utilisez pas à l'extérieur de mieux répondre aux
ou dans un véhicule ou un besoins de nos clients.
bateau en mouvement. • La puce ne recueille
aucune information
AVIS AUX CLIENTS concernant les personnes
CONCERNANT LE qui utilisent le produit
STOCKAGE DE LA
ou le foyer dans lequel il
MÉMOIRE
est utilisé. Si vous avez
• Veuillez noter qu‘afin de des questions sur la puce
mieux servir nos clients, de stockage de mémoire,
une mémoire interne veuillez nous contacter à
a été intégrée à votre privacy@breville.com
appareil. Cette mémoire
se compose d‘une INSTRUCTIONS
petite puce recueillant SPÉCIFIQUES POUR
certaines informations LA BES880
sur votre appareil, dont • Il est recommandé de
sa fréquence d‘utilisation brancher la machine à
et la façon dont il est espresso dans un circuit
utilisé. Dans l‘éventualité dédié, correctement
où votre appareil serait relié à la terre et séparé
renvoyé pour réparation, des autres appareils
les renseignements électriques.
recueillis à partir de la • Évitez tout contact avec
puce nous permettront les pièces en mouvement.
de le réparer rapidement • Assurez-vous que la
et efficacement. Les trémie à grains ne
informations recueillies contient aucun objet
constituent également étranger avant usage.
4• Remplissez le réservoir • Soyez prudent lors du
avec de l'eau froide détartrage, car de la vapeur
seulement. N'utilisez chaude sera libérée. Avant
aucun autre liquide. le détartrage, éteignez
N'utilisez pas d'eau la machine, laissez-la
hautement filtrée, refroidir au moins 1 heure
déminéralisée ou distillée, et assurez-vous que le
car cela peut affecter le plateau d'égouttage est
goût du café et le mode parfaitement inséré.
de fonctionnement de la Pour les instructions,
machine à espresso. référez-vous à la section
• Assurez-vous que le 'Détartrage' en page 22.
porte-filtre est fermement • Ne tentez pas d'ouvrir
inséré et sécurisé dans la ou de réparer la
tête d'infusion avant de machine à espresso.
débuter l'extraction. Ne • Pour tout entretien
retirez jamais le porte- autre que le nettoyage,
filtre durant le processus contactez le Soutien aux
d'extraction. consommateurs de Breville
AVERTISSEMENT ou visitez un centre de
service autorisé Breville.
Pour éviter tout risque
de blessure, n'ouvrez INSTRUCTIONS
pas la chambre SPÉCIFIQUES POUR LE
d'infusion pendant le FILTRE À EAU
processus d'infusion. • La cartouche du filtre doit
• Usez de prudence après être laissée hors de portée
avoir moussé le lait, car des enfants.
la fonction de purge • Rangez les cartouches
automatique expulsera du filtre dans un
de la vapeur chaude endroit sec, dans leur
lorsque la buse vapeur emballage original.
sera abaissée. • Protégez les cartouches
5de la chaleur et de la Si vous utilisez une corde
lumière directe. de rallonge:
• N'utilisez pas (1) la puissance électrique
de cartouches indiquée sur le cordon
endommagées. ou la corde de rallonge
• N'ouvrez pas les doit être au moins
cartouches du filtre. équivalente à la puissance
• Si vous vous absentez électrique de l’appareil;
pour une période (2) la corde ne doit pas
prolongée, videz le pendre d’un comptoir ou
réservoir d'eau et d’une table où de jeunes
remplacez la cartouche. enfants pourraient s’y
suspendre ou trébucher
COURT CORDON accidentellement;
D’ALIMENTATION (3) la corde de rallonge doit
Votre appareil Breville être munie d’une fiche à
est muni d’un cordon 3 broches reliée à la terre.
d’alimentation court et très
sécuritaire qui prévient FICHE
les blessures corporelles ASSIST® DE BREVILLE
ou dommages résultant Votre appareil Breville
du fait de tirer, trébucher est muni d’une fiche
ou s’enchevêtrer dans un exclusive Assist® conçue
cordon plus long. spécialement avec un
Les cordons d’alimentation anneau pour laisser passer
détachables ou les cordes un doigt et faciliter le
de rallonge peuvent être retrait sécuritaire de la
utilisés avec précaution. prise murale
USAGE DOMESTIQUE SEULEMENT
CONSERVEZ CES INSTRUCTIONS
6Composants
A
B
C
D
E K
F
G L
H M
I
N
O
P
Q
J
A. Trémie à grains de 250 g J. Plateau d'égouttage amovible avec
Avec système de verrouillage pour faciliter séparateur de café - humide et sec
le retrait, le rangement et le transfert des Avec indicateur de trop plein 'Empty Me!'
grains de café. K. Réservoir d'eau de 2 L (68 oz).
B. Moulin à meules coniques intégré. Avec filtre à eau remplaçable, pour
C. Panneau de commande à écran tactile réduire les impuretés et le tartre.
Affiche les réglages en cours et offre une L. Tête d'infusion
interface tactile. M. Sortie dédiée à l'eau chaude
D. Sélecteur de TAILLE DE MOUTURE N. Hauteur requise pour grandes tasses
Réglages de mouture à espresso, de fin
O. Buse vapeur facile à nettoyer
à grossier.
Pour moussage automatique du lait.
E. Touche MARCHE
P. Capteur de température du lait
F. Bourroir intégré et amovible de 54 mm
Q. Tiroir de rangement (logé derrière le
G. Sortie de mouture plateau d'égouttage)
H. Support de mouture mains libres Pour ranger les accessoires qui ne sont
I. Porte-filtre en acier inoxydable de 54 mm pas utilisés.
Avec becs verseurs de style commercial.
7You can also read
