Axiom Multi Level catalog 2021 2022 - Straumann
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Axiom® Multi Level® catalog 2021 - 2022
OVERVIEW OF AXIOM® PROSTHETIC SOLUTIONS
SUMMARY 4
SURGERY
Axiom® BL implants and healing screws 10
Axiom® TL implants and healing screws 14
PROSTHESIS
Temporization 19
Impression 20
Abutments
Esthetic Titanium abutments for cemented prosthesis 24
Standard Titanium abutments for cemented prosthesis 28
Multi-Unit range 32
Removable overdentures 38
Labside range
Flexibase range 48
Pre-milled range 51
Cerec compatible ti-base range 52
Simeda® CAD/CAM prosthesis with Angulated Access
AxIN® 54
InLink® 58
Prosthesis on Multi-Unit with Angulated Access 64
INSTRUMENTS AND ACCESSORIES
Surgery
Kits and instruments 66
Axiom® Multi-Level® MG kit 72
Axiom® Multi-Level® Dense bone kit 74
Axiom® Multi-Level® Countersinks 76
INITIAL Guided surgery 78
Drill stop kit 80
Prosthesis
Kits and instruments 82
Laboratory Kits 87
Accessories for Digital Workflows 88
Screws and recommended torque values 92
Try-In abutments for Axiom® BL 94
NARROW MESIO DISTAL SPACES MANAGEMENT
AXIOM® 2.8
Axiom® 2.8 implants 96
Axiom® 2.8 prosthetic components 99
Axiom® 2.8 kit and instruments 101
AXIOM® MULTI LEVEL® PACKAGING 104
EQUIPMENTS
Equipments for implantology and surgery 108
INSTRUCTIONS FOR USE 112
2 3
Axiom® Single implant supported restorations
Multi Level® PROVISIONAL PROSTHESIS FINAL PROSTHESIS
CAD/CAM
Overview of prosthetic
solutions AxIN® temporary copings
Screw-retained
AA AxIN® customized
screw-retained teeth
with Angulated Access whith Angulated Access
Axiom® BL Axiom® BL
Axiom® TL Axiom® TL
→ See Page 55 → See Page 54
Customized screw-retained teeth
Customized abutments
for cemented restorations
Axiom® BL
Axiom® TL
→ See Page 54 :
Flexibase® titanium bases
Axiom® BL
LABSIDE
Axiom® TL
→ See Page 48
Temporary abutments Screw-retained Premilled range
for customized abutments
Axiom® BL
Axiom® BL LABSIDE
Axiom TL® Q
Axiom® TL
→ See Page 19
→ See Page 51
CEREC® compatible titanium bases*
Axiom® BL
CHAIRSIDE
Axiom® TL
→ See Page 52
CONVENTIONAL
Esthetic titanium abutments
for cemented restorations
Axiom® BL
→ See Page 24
Standard titanium abutments
for cemented restorations Q
Axiom® BL
→ See Page 28
Components presented on these pages are not exhaustive.
To see the entire range, please refer to the page numbers indicated.
4 AA Angulated Access * Compatible with Dentsply Sirona 5
Plural implant supported restorations
ABUTMENT PROVISIONAL PROSTHESIS FINAL PROSTHESIS
Multi-Unit secondary CAD/CAM
components are the
same for Axiom®BL CAD/CAM bridge,
and Axiom®TL suprastructure or bar on Multi-Unit
Axiom® BL
AA
Axiom® TL
Q Flexibase® titanium base for Multi-Unit
Multi-Unit Multi-Unit
abutments temporary abutments Axiom® BL
with straight LABSIDE
Axiom® BL Axiom® TL
or Angulated Access
→ See Page 48
Axiom® TL
Axiom® BL
→ See Page 32 CONVENTIONAL
Axiom® TL
→ See Page 64 Multi-Unit castable copings
Axiom® BL
Axiom® TL
→ See Page 36
CAD/CAM
InLink® Q InLink® temporary abutments
with straight or Angulated Access
abutments CAD/CAM bridge
Axiom BL
® or suprastructure on InLink®
Axiom® BL
→ See Page 58 Axiom® TL Axiom® BL
AA
→ See Page 58 Axiom® TL
Flexibase® titanium base for plural,
directly on Axiom® TL
Axiom® TL LABSIDE
→ See Page 48
Premilled range for customized abutments
Axiom® BL
LABSIDE
Axiom® TL
CONVENTIONAL
→ See Page 51
Esthetic titanium abutments
for cemented restorations
Axiom® BL
→ See Page 24
Standard titanium abutments Q
for cemented restorations
Axiom® BL
→ See Page 28
6 Components presented on these pages are not exhaustive. AA Angulated Access 7
To see the entire range, please refer to the page numbers indicated.
Solutions for removable
overdentures
Novaloc® -Locator® - Ball
Axiom® BL
Axiom® TL
→ See Page 38
8 9
Surgical components Surgical components
SURGERY
Axiom® BL SINGLE DIAMETER PROSTHETIC
CONNECTION
SEALED SINGLE
CONICAL CONNECTION
Prosthetic convenience
Bone Level implant, Designed for
biological integration
morse tapered connection
Ø 2.7 mm
• 2 profiles to cover all bone situations
Ø 3.4 Ø 4.0 Ø 4.6 Ø 5.2 PLATFORM SWITCHING
• 4 diameters: 3.4, 4.0, 4.6 and 5.2 mm Soft tissue stabilization
• Length from 6.5 mm to 18 mm SUBCRESTAL
POSITIONING
Flexible esthetic management
3 mm
2 mm
1 mm
0 mm SANDBLASTED NECK
Optimized bone attachment
INTITUITIVE
TRILOBE
Guided, accurate abutment placement
SINGLE COMMON
SURGERY KIT REG PX
Freedom of choice, efficient protocols
2 BODY PROFILES
REG: Parallel wall implant, for all types of bone.
Versatile implant with progressive anchorage.
Apically tapered implant, for immediate
PX: placement post extraction.
10 11
Axiom® BL Surgical components Axiom® BL Surgical components
SURGERY
Implants Healing screws
Manual
Manual surgical
AXIOM® BL REG AXIOM® BL PX < 10 N.cm
Q wrench AXIOM® BL REG AND PX
OPCS100
DIAMETER Ø 3.4 mm Ø 4.0 mm Ø 4.6 mm Ø 5.2 mm Ø 3.4 mm Ø 4.0 mm Ø 4.6 mm Ø 5.2 mm
Cover screw Ø 3.4 mm Ø 4.0 mm Ø 5.0 mm Ø 6.0 mm
included Q
Manual GINGIVAL CORONAL HEIGHT CORONAL HEIGHT CORONAL HEIGHT CORONAL HEIGHT
< 10 N.cm
HEIGHT 2 mm 1 mm 2 mm 1 mm 2 mm 1 mm 2 mm 1 mm
OPIM100*
LENGTH
- - - -
6.5 mm - OP40060 OP46060 OP52060 - PX40060 PX46060 PX52060 0.75 mm
8 mm OP34080 OP40080 OP46080 OP52080 PX34080 PX40080 PX46080 PX52080
OPHS400 OPHSF400 OPHS500 OPHSF500
10 mm OP34100 OP40100 OP46100 OP52100 PX34100 PX40100 PX46100 PX52100
12 mm OP34120 OP40120 OP46120 OP52120 PX34120 PX40120 PX46120 PX52120
1.5 mm
14 mm OP34140 OP40140 OP46140 OP52140 PX34140 PX40140 PX46140 -
OPHS310 OPHSF310 OPHS410 OPHSF410 OPHS510 OPHSF510 OPHS610 OPHSF610
16 mm OP34160 OP40160 - - PX34160 PX40160 - -
18 mm OP34180 OP40180 - - PX34180 PX40180 - -
All implant visuals are shown in 10 mm length. 2.5 mm
TOP REFERENCES ARE SHOWN IN BLUE *Manual surgical wrench OPHS320 OPHSF320 OPHS420 OPHSF420 OPHS520 OPHSF520 OPHS620 OPHSF620
OPCS100
3.5 mm
Choice of the prosthetic component diameter
OPHS330 OPHSF330 OPHS430 OPHSF430 OPHS530 OPHSF530 OPHS630 OPHSF630
Recommended emergence diameter
Prosthetic diameter according to the tooth to be restored for Axiom® BL
Mesio-distal width in mm* 3.4 4.0 5.0 6.0
central incisor 7.6 - 10.5
4.5 mm*
lateral incisor 5.3 - 8.3
OPHS340* OPHSF340* OPHS440* OPHSF440* OPHS540* OPHSF540* OPHS640* OPHSF640*
canine 6.9 - 8.8
Maxilla 1st premolar 6.0 - 8.2
LASER MARKING ON SCREW HEAD
2 premolar
d
5.9 - 7.5 Coronal height
1st molar 9.7 - 12.7 Gh (mm) 0.75 1.5 2.5 3.5 4.5 Recommended 1 mm or 2 mm
suture level
H (mm) 0 1 2 3 4 Gingival height
2d molar 8.7 - 11.4
0.75 / 1.5 / 2.5 / 3.5
and 4.5 mm*
central incisor 4.7 - 6.2 Ø 3.4
lateral incisor 5.3 - 7.0 diameter 4
canine 6.0 - 8.1 Ø 4.0 gingival height F
Mandible 1st premolar 6.0 - 8.1
"F" if Ch = 1 mm
Ø 5.0
2 premolar
d
6.4 - 8.8 This figure shows a healing screw with
2.5 GH and a 2 mm CH
1st molar 9.7 - 12.5
Ø 6.0 A marking "F" is added for screws of Ch = 1 mm
2 molar
d
9.3 - 11.9
*4.5 mm gingival height healing screws have a specific design
*Source: Lavergne, Bulletins et Mémoires de la Société d’Anthropologie de Paris, vol 1, serie XIII, 1974, 351-355.
in first intention other possibility
12 13
Surgical components Surgical components
SURGERY
Axiom® TL CONVENTIONAL
CONNECTION
CONVENTIONAL
CONNECTION
Tissue Level implant, Single and plural
INLINK® CONNECTION
double internal connection prosthesis
For direct Simeda® screw-retained plural
prosthesis
6 NECK PROFILES
• 2 profiles to cover all bone situations
• Diameters: 3.4 mm, 4.0 mm,
4.6 mm and 5.2 mm INNOVATIVE INLINK®
CONNECTION
• Length from 6.5 mm to 18 mm Simeda® screw-retained plural TISSUE FAVORED
prosthesis DESIGN
• 2 platforms: R/4.8 mm and N/4.0 mm
• 3 neck heights: 1.5, 2.5 and 3.5 mm
TISSUE FAVORED DESIGN
Maximized tissue volume
SINGLE COMMON
SURGERY KIT
Freedom of choice, efficient
protocols PX REG
2 BODY PROFILES
REG: Parallel wall implant, for all types of bone.
Versatile implant with progressive anchorage.
Apically tapered implant, for immediate
PX: placement post extraction.
14 15
Axiom® TL Surgical components Axiom® TL Surgical components
SURGERY
Axiom® TL REG implants Axiom® TL PX implants
Manual Sealing screw included Manual Sealing
AXIOM® TL REG screw included AXIOM® TL PX
TSS-R0 TSS-N0 PLATFORM R/4.8 mm PLATFORM N/4.0 mm
TSS-R0 TSS-N0 PLATFORM/R 4.8 mm PLATFORM/N 4.0 mm
Manual surgical wrench Ø 3.4 mm Ø 4.0 mm Ø 4.6 mm Ø 5.2 mm Ø 3.4 mm Ø 4.0 mm
OPCS100 Manual surgical wrench
OPCS100 Ø 3.4 mm Ø 4.0 mm Ø 4.6 mm Ø 5.2 mm Ø 3.4 mm Ø 4.0 mm
Q
IMPLANT NECK
Q
LENGHT HEIGHT
IMPLANT NECK
1.5 mm - TOP40060R1 TOP46060R1 TOP52060R1 - TOP40060N1 LENGHT HEIGHT
6.5 mm 2.5 mm - TOP40060R2 TOP46060R2 TOP52060R2 - TOP40060N2 1.5 mm - TPX40060R1 TPX46060R1 TPX52060R1 - TPX40060N1
3.5 mm - TOP40060R3 TOP46060R3 - - TOP40060N3 6.5 mm 2.5 mm - TPX40060R2 TPX46060R2 TPX52060R2 - TPX40060N2
1.5 mm TOP34080R1 TOP40080R1 TOP46080R1 TOP52080R1 TOP34080N1 TOP40080N1 3.5 mm - TPX40060R3 TPX46060R3 - - TPX40060N3
8 mm 2.5 mm TOP34080R2 TOP40080R2 TOP46080R2 TOP52080R2 TOP34080N2 TOP40080N2 1.5 mm TPX34080R1 TPX40080R1 TPX46080R1 TPX52080R1 TPX34080N1 TPX40080N1
3.5 mm TOP34080R3 TOP40080R3 TOP46080R3 - TOP34080N3 TOP40080N3 8 mm 2.5 mm TPX34080R2 TPX40080R2 TPX46080R2 TPX52080R2 TPX34080N2 TPX40080N2
1.5 mm TOP34100R1 TOP40100R1 TOP46100R1 TOP52100R1 TOP34100N1 TOP40100N1 3.5 mm TPX34080R3 TPX40080R3 TPX46080R3 - TPX34080N3 TPX40080N3
10 mm 2.5 mm TOP34100R2 TOP40100R2 TOP46100R2 TOP52100R2 TOP34100N2 TOP40100N2 1.5 mm TPX34100R1 TPX40100R1 TPX46100R1 TPX52100R1 TPX34100N1 TPX40100N1
3.5 mm TOP34100R3 TOP40100R3 TOP46100R3 - TOP34100N3 TOP40100N3 10 mm 2.5 mm TPX34100R2 TPX40100R2 TPX46100R2 TPX52100R2 TPX34100N2 TPX40100N2
1.5 mm TOP34120R1 TOP40120R1 TOP46120R1 TOP52120R1 TOP34120N1 TOP40120N1 3.5 mm TPX34100R3 TPX40100R3 TPX46100R3 - TPX34100N3 TPX40100N3
12 mm 2.5 mm TOP34120R2 TOP40120R2 TOP46120R2 TOP52120R2 TOP34120N2 TOP40120N2 1.5 mm TPX34120R1 TPX40120R1 TPX46120R1 TPX52120R1 TPX34120N1 TPX40120N1
3.5 mm TOP34120R3 TOP40120R3 TOP46120R3 - TOP34120N3 TOP40120N3 12 mm 2.5 mm TPX34120R2 TPX40120R2 TPX46120R2 TPX52120R2 TPX34120N2 TPX40120N2
1.5 mm TOP34140R1 TOP40140R1 TOP46140R1 - TOP34140N1 TOP40140N1 3.5 mm TPX34120R3 TPX40120R3 TPX46120R3 - TPX34120N3 TPX40120N3
14 mm 2.5 mm TOP34140R2 TOP40140R2 TOP46140R2 - TOP34140N2 TOP40140N2 1.5 mm TPX34140R1 TPX40140R1 TPX46140R1 - TPX34140N1 TPX40140N1
3.5 mm TOP34140R3 TOP40140R3 TOP46140R3 - TOP34140N3 TOP40140N3 14 mm 2.5 mm TPX34140R2 TPX40140R2 TPX46140R2 - TPX34140N2 TPX40140N2
1.5 mm TOP34160R1 TOP40160R1 - - TOP34160N1 TOP40160N1 3.5 mm TPX34140R3 TPX40140R3 TPX46140R3 - TPX34140N3 TPX40140N3
16 mm 2.5 mm TOP34160R2 TOP40160R2 - - TOP34160N2 TOP40160N2 1.5 mm TPX34160R1 TPX40160R1 - - TPX34160N1 TPX40160N1
3.5 mm TOP34160R3 TOP40160R3 - - TOP34160N3 TOP40160N3 16 mm 2.5 mm TPX34160R2 TPX40160R2 - - TPX34160N2 TPX40160N2
3.5 mm TPX34160R3 TPX40160R3 - - TPX34160N3 TPX40160N3
Axiom TL healing screws
®
TOP REFERENCES ARE SHOWN IN BLUE.
All implant visuals are shown in 10 mm length.
AXIOM® TL REG AND PX
Manual
Q Manual surgical wrench OPCS100 PLATFORM/R 4.8 mm PLATFORM/N 4.0 mm
CORONAL HEIGHT 2 mm 4 mm 2 mm 4 mm Platform identification
by laser marking “TL N” and “TL R”
Conical profile
THS-R210 THS-R410 THS-N210 THS-N410
CORONAL HEIGHT 2 mm 4 mm 2 mm 4 mm
Straight profile - -
16 17
THS-R200 THS-N200
Axiom® BL Axiom® TL Temporization
Temporary abutments
TEMPORARY SINGLE-UNIT RESTORATION
+ Retention grooves
+ Indexed
+ Supplied STERILE
PROSTHESIS
25
N.cm
+ Reworkable
Manual Manual
CH = 9 MM Laboratory screw
OPTS162 TS163 - TS162
Ø
GH
25 Supplied 25 Supplied
N.cm with N.cm with
M1.6 titanium screw
OPTS161 TS161
Axiom® BL Axiom® TL
• Platform identification by
laser marking «N» and «R»
AXIOM® BL AXIOM® TL
PLATFORM PLATFORM
Ø 3.4 mm Ø 4.0 mm Ø 5.0 mm Ø 6.0 mm
R/4.8 mm N/4.0 mm
Removable with
the gripper
INEXPS/L
GINGIVAL
HEIGHT
H 0.75 mm - OPTP400 OPTP500 -
H 1.5 mm OPTP310 OPTP410 OPTP510 OPTP610
H 2.5 mm OPTP320 OPTP420 OPTP520 OPTP620 TC100-R TC100-N
H 3.5 mm OPTP330 OPTP430 OPTP530 OPTP630
18 H 4.5 mm OPTP340 OPTP440 OPTP540 OPTP640 19Axiom® BL Axiom® TL Axiom® BL Axiom® TL Impression range
Impression range Components for conventional impression taking
AXIOM® BL AXIOM® TL
A COMPLETE RANGE PLATFORM R/4.8 mm PLATFORM N/4.0 mm
TO COVER ALL TECHNICS Manual
Single Plural Single Plural
(indexed) (not indexed)* (indexed) (not indexed)*
+ Axiom® BL - One transfer - One analog for all implant diameters SHORT
Pop-in
+ Impression rings for pick-up transfers on Axiom® BL transfer
OPPI100S (X1)
OPPI100S-4 (X4)
PROSTHESIS
Screw
+ Axiom® TL - Colour coding of platforms R and N
included
TT200-R TT200-N
LONG
ILT200-R-4 ILT200-N-4
OPPI100 (X1)
OPPI100-4 (X4)
Manual TT200L-R TT200L-N
OPPU101
SHORT
OPPU102
Pick-up-
transfer OPPU100 (X1)
OPPU100-4 (X4)
2 screws
included
OPPU102
LONG
OPPU102L
ILT100-R ILT100-N
OPPU100L (X1) ILT100-R-4 ILT100-N-4
OPPU100L-4 (X4) TT300-R (X4) TT300-N (X4)
COMPATIBLE *Also for inLink® abutment
GINGIVAL Ø 4 mm Ø 5 mm
HEIGHT PLATFORM R/4.8 mm
PLATFORM N/4.0 mm
1.5 mm
Impression
rings for OPROFIL410 (X4) OPROFIL510 (X4)
Axiom®BL
2.5 mm
pick up
/ 4.5 mm
transfers
OPROFIL420 (X4) OPROFIL520 (X4)
3.5 mm
OPROFIL430 (X4) OPROFIL530 (X4)
Implant
analog
OPIA100 (X1) TA100-R (X1) TA100-N (X1)
OPIA100-4 (X4) TA100-R-4 (X4) TA100-N-4 (X4)
20 21
Hexagonal screwdriver.Axiom® BL Axiom® TL Impression range
Scan-Adapters for digitization of conventional impression
Manual AXIOM® TL SINGLE, AXIOM® TL PLURALAxiom® BL Abutments Axiom® BL Abutments
AXIOM® BL
GINGIVAL
Esthetic Titanium abutments ANGULATION
M1.6 black screw
HEIGHT
Ø 3.4 mm Ø 4.0 mm Ø 5.0 mm Ø 6.0 mm
range for Axiom® BL included OPTS160
7°
0.75 mm - -
OPAT40-7 OPAT50-7
FOR SINGLE-UNIT OR MULTIPLE-UNIT ά 1.5 mm -
CEMENT-RETAINED RESTORATIONS Ch = 7 mm
OPAT31-7 OPAT41-7 OPAT51-7
PROSTHESIS
A wide range to cover all indications
Ø 2.5 mm -
+ 56 components available
Gh OPAT32-7 OPAT42-7 OPAT52-7
+ A choice of 3 angulations (7°, 15°, 23°)
3.5 mm -
+ A design of esthetic shoulders adapted
for cement-retained prosthesis OPAT33-7 OPAT43-7 OPAT53-7
For the choice of the prosthetic component diameter, please see page 12 15°
0.75 mm - -
OPAT401 OPAT501
AXIOM® BL
1.5 mm
GINGIVAL
ANGULATION Ø 3.4 mm Ø 4.0 mm Ø 5.0 mm Ø 6.0 mm
HEIGHT OPAT311 OPAT411 OPAT511 OPAT611
M1.6 black screw
included 2.5 mm
OPTS160 0.75 mm - -
OPAT400 OPAT500 OPAT321 OPAT421 OPAT521 OPAT621
0°
Note : 4.5 mm gingival height aesthetic abutments are shown at page 20.
3.5 mm
1.5 mm -
OPAT331 OPAT431 OPAT531 OPAT631
OPAT410 OPAT510 OPAT610 23°
0.75 mm - -
OPAT402 OPAT502
2.5 mm -
1.5 mm - -
OPAT420 OPAT520 OPAT620 OPAT412 OPAT512
2.5 mm - -
3.5 mm -
OPAT422 OPAT522
Removable with
the gripper OPAT430 OPAT530 OPAT630
INEXPS/L
3.5 mm - -
24 Hexagonal screwdriver. 25
OPAT432 OPAT532Axiom® BL Abutments
Particular case:
Gingival height 4.5 mm esthetic TITANIUM
abutments have a specific gingival profile to
be used in the following situations: 7 mm
+G
ingival height of 4.5 mm and coronal height
of 7 mm
2 mm
+G
ingival height of 2.5 mm and coronal height of
9 mm. In order of obtain this abutment with a 4.5 mm
coronal height of 9 mm, the laboratory should 2.5 mm
rework the 2 mm cylindrical part
For the choice of the prosthetic component diameter, please see page 12.
M1.6 black screw included
OPTS160 AXIOM® BL
GINGIVAL
ANGULATION Ø 3.4 mm Ø 4.0 mm Ø 5.0 mm Ø 6.0 mm
HEIGHT
0°
4.5 mm -
OPAT440 OPAT540 OPAT640
-
7° 4.5 mm
OPAT34-7 OPAT44-7 OPAT54-7
15° 4.5 mm
OPAT341 OPAT441 OPAT541 OPAT641
-
23° 4.5 mm -
OPAT442 OPAT542
26Axiom® BL Abutments Axiom® BL Abutments
Standard Titanium abutments
Standard Titanium abutments for
Axiom® BL Q AXIOM® BL
GINGIVAL CORONAL
ANGULATION Ø 3.4 mm Ø 4.0 mm Ø 5.0 mm Ø 6.0 mm
HEIGHT HEIGHT
FOR SINGLE-UNIT OR MULTIPLE-UNIT CEMENT-RETAINED RESTORATIONS M1.6 black screw
included OPTS160
4 mm OPST314 OPST414 OPST514 OPST614
1.5 mm
A wide range to cover all indications 0° 6 mm OPST316 OPST416 OPST516 OPST616
PROSTHESIS
4 mm OPST324 OPST424 OPST524 OPST624
+ A choice of 3 angulations (0°, 15°, 23°)
2.5 mm
+ 3 gingival heights – 2 coronary heights 6 mm OPST326 OPST426 OPST526 OPST626
+D
elivered sterile for immediate placement 4 mm OPST334 OPST434 OPST534 OPST634
ά 3.5 mm
6 mm OPST336 OPST436 OPST536 OPST636
Ch 15° 1.5 mm 6 mm - OPST416-15 OPST516-15 -
without
Ø indexation
1.5 mm 6 mm - OPST426-15 OPST526-15 -
Gh
2.5 mm 6 mm - OPST436-15 OPST536-15 -
23° 1.5 mm 6 mm - OPST416-23 OPST516-23 -
without
indexation
2.5 mm 6 mm - OPST426-23 OPST526-23 -
3.5 mm 6 mm - OPST436-23 OPST536-23 -
For the choice of the prosthetic component diameter, please see page 12 Hexagonal screwdriver.
Removable with
the gripper
INEXPS/L
28 29Axiom® BL Abutments Axiom® BL Abutments
FOR AXIOM® BL STANDARD ABUTMENTS
C ORONAL
Ø 3.4 mm Ø 4.0 mm Ø 5.0 mm Ø 6.0 mm
HEIGHT
Standard
abutment
transfert
OPTT100
OPTT100-5 (X5)
PROSTHESIS
OPSA304 OPSA404 OPSA504 OPSA604
Standard 4 mm
abutment
analog
OPSA306 OPSA406 OPSA506 OPSA606
6 mm
OPPC304 OPPC404 OPPC504 OPPC604
PEEK 4 mm
protective
cap
OPPC306 OPPC406 OPPC506 OPPC606
6 mm
Single unit
OPCA304 OPCA404 OPCA504 OPCA604
anti-rotational:
PMMA Multiple-unit
rotational:
OPCR304 OPCR404 OPCR504 OPCR604
castable 4 mm
coping
Single unit
anti-rotational:
OPCA306 OPCA406 OPCA506 OPCA606
Multiple-unit
rotational: OPCR306 OPCR406 OPCR506 OPCR606
6 mm
30 31Axiom® BL Axiom® TL Abutments
Multi-Unit range
FOR MULTIPLE-UNIT SCREW-RETAINED RESTORATIONS
A solution for each indication
+ 2 platforms: 4.8 mm and 4.0 mm
+ Secondary components common to Axiom® BL and Axiom® TL
+ Easy handling
Ø = 4.8 mm
Ch = 2.5 mm
Ch = 2.5 mm
Ø = 4.8 mm
Gh
ά
Hmax*
Gh
Axiom® BL
+ Straight and angulated abutments: 18° or 30°
+ 5 gingival heights, depending on platforms
+T
he 20° morse taper on the platform allows
greater correction of axial malalignment.
20° 20° 20°
Axiom® TL Straight Multi-Unit Angulated Multi-Unit
All Multi-Unit abutments are delivered with an attached holder.
32 33Axiom® BL Axiom® TL Abutments Axiom® BL Axiom® TL Abutments
Multi-Unit abutments Conventional impression on Multi-Unit PLATFORM R/4.8 mm PLATFORM N/4.0 mm
Manual
AXIOM® BL AXIOM® TLAxiom® BL Axiom® TL Abutments Axiom® BL Axiom® TL Abutments
Scan accessories PACIFIC components for Multi-Unit abutments
MULTI-UNIT R/4.8 mm MULTI-UNIT N/4.0 mm
PLATFORM N/4.0 mm
Scan-Adapter
Narrow Multi-Unit PACIFIC kit
Laboratory screw included -
Manual Scan-AdapterAxiom® BL Axiom® TL Axiom® BL Axiom® TL
Novaloc® Novaloc®
REMOVABLE OVERDENTURE RETENTION SYSTEM FOR Novaloc® abutments
EDENTULOUS PATIENTS
+ 5 gingival heights, for Axiom® BL and Axiom® TL implants
+C
ombinaison of PEEK material and DLC* carbon-based coating offering long term 3.9 mm
performance and outstanding wear resistance
3.9 mm
1.7 mm
+ I nnovative connection system and unique convenient component handling Ø 4 mm
1.7 mm
+ I mplant divergence compensation up to 40° Ø 4.8 mm
GH
+ Less hassle, for advanced patient comfort GH
* DLC = Diamond-like-Carbon
For AXIOM® BL For AXIOM® TL
R/4.8 mm
AXIOM® BL AXIOM® TL
GINGIVAL GINGIVAL N/4.0 mm R/4.8 mm
HEIGHT HEIGHT PLATFORM PLATFORM
1.5 mm OPNOVA015 0.0 mm TOPNOVA000-N TOPNOVA000-R
2.5 mm OPNOVA025 1.0 mm TOPNOVA010-N TOPNOVA010-R
3.5 mm OPNOVA035 2.0 mm TOPNOVA020-N TOPNOVA020-R
4.5 mm OPNOVA045 3.0 mm TOPNOVA030-N TOPNOVA030-R
5.5 mm OPNOVA055 4.0 mm TOPNOVA040-N TOPNOVA040-R
38 39Axiom® BL Axiom® TL Novaloc® inserts
Novaloc® retention insert Extra-Light
RED retention
PEEK
Novaloc®
≈ 300 g
≈ 0.66 lbs* 2010.710-NOV (X4)
Novaloc® retention insert Light retention
WHITE ≈ 750 g
Impression taking PEEK ≈ 1.65 lbs*
2010.711-NOV (X4)
Novaloc® impression coping
Novaloc® retention insert Medium retention
YELLOW ≈ 1 200 g
PEEK ≈ 2.65 lbs*
PEEK 2010.722-NOV (X4) 2010.712-NOV (X4)
Novaloc® retention insert Strong retention
GREEN ≈ 1 650 g
PEEK ≈ 3.64 lbs*
Master cast - Impression 2010.713-NOV (X4)
Novaloc® model analog Novaloc® retention insert Extra-strong
BLUE retention
PEEK ≈ 2 100 g
≈ 4.63 lbs* 2010.714-NOV (X4)
2010.721-NOV (X4)
Novaloc® block out spacer Novaloc® retention insert Ultra-strong
BLACK retention
PEEK ≈ 2 550 g
≈ 5.62 lbs* 2010.715-NOV (X4)
POM 2010.723-NOV (X4)
Novaloc® processing package 2 x 2010.701-NOV
Novaloc® processing collar TITANIUM 2 x 2010.711-NOV
2 x 2010.712-NOV
Ti / POM / PEEK / silicone 2 x 2010.713-NOV 2010.601-NOV
2 x 2010.724-NOV
Silicone 2010.724-NOV (X10) Novaloc® processing package 2 x 2010.702-NOV
Novaloc® processing insert PEEK 2 x 2010.711-NOV
2 x 2010.712-NOV
PEEK / POM / silicone 2 x 2010.713-NOV
2010.611-NOV
2 x 2010.724-NOV
POM 2010.725-NOV (X4)
*lbs: pounds
Novaloc® auxiliaries
Novaloc® secondary parts and special accessories Novaloc® equipment box with 3
instruments
INCLUDING
1 x 2010.731-NOV
Novaloc® matrix housing 1 x 2010.741-NOV
Matrix: titanium 1 x 2010.751-NOV
Including mounting insert Mounting insert: 2010.101-NOV
POM
2010.701-NOV (X4) Novaloc® processing insert removal
instrument & analog repositioning aid
Novaloc® matrix housing -
peek Matrix: PEEK BLUE 2010.731-NOV
Including mounting insert Mounting insert:
POM Novaloc® retention insert instrument
PEEK 2010.702-NOV (X4) (mounting and demounting)
2010.741-NOV
Novaloc® matrix housing - BROWN
extended Matrix: titanium
Including mounting insert Mounting insert: Novaloc® matrix housing extraction
PEEK instrument
Extended with attachment
option 2010.703-NOV (X4) GREY 2010.751-NOV
40 41Axiom® BL Axiom® TL Axiom® BL Axiom® TL
Locator® Locator®
REMOVABLE OVERDENTURE RETENTION SYSTEM FOR Impression taking
EDENTULOUS PATIENTS Locator® impression coping
+ 5 gingival heights, for Axiom® BL and Axiom® TL implants
O8505 (X4)
+P
roven dual retentive system offering stability, hardness and wear resistance
+P
ivoting technology and self-aligning design for advanced patient comfort and usability
Master cast - Impression
+D
ivergence compensation up to 40° Locator® analog
3.9 mm O8530 (X4)
3.9 mm
1.6 mm
Ø 4 mm 1.6 mm
Ø 4.8 mm
GH
Locator® secondary parts and special accessories
GH
STANDARD RANGE INSERT RETENTION UP TO 20° DIVERGENCE COMPENSATION BETWEEN 2 IMPLANTS
Locator® male processing Standard range
package retention including:
1 x O8524
1 x O8527
1 x O8529
For AXIOM® BL For AXIOM® TL
R/ 4.8 mm Spacer ring
Black housing
Titanium, polyethylene, nylon O8519-2 (X2)
Locator® replacement male Standard retention
insert ≈ 2 268 g
CLEAR ≈ 5.0 lbs*
Nylon O8524 (X4)
Locator® abutments Locator® replacement male Light retention
insert ≈ 1 361 g
PINK ≈ 3.0 lbs*
AXIOM® BL AXIOM® TL
Nylon O8527 (X4)
GINGIVAL GINGIVAL N/∅ 4.0 mm R/∅ 4.8 mm
HEIGHT HEIGHT PLATFORM PLATFORM
Locator® replacement male Extra-Light
insert retention
1.5 mm O1697 0.5 mm O2811 O2830 BLUE ≈ 680 g
≈ 1.5 lbs*
2.5 mm O1698 1.5 mm O2812 O2831
Nylon O8529 (X4)
3.5 mm O1699 2.5 mm O2813 O2832
4.5 mm O1016 3.5 mm O2814 O2833
5.5 mm O1017 4.5 mm O2815 O2834
42 43Axiom® BL Axiom® TL
Locator® inserts secondary parts
EXTENDED RANGE INSERT RETENTION UP TO 40° DIVERGENCE COMPENSATION BETWEEN 2 IMPLANTS
Locator® male processing
package Extended range
retention including:
1 x O8558
1 x O8548
1 x O8915
Spacer ring
Black housing
Titanium, polyethylene, nylon O8540-2 (X2)
Locator® replacement male Zero retention
insert 0g
GREY 0 lbs*
Nylon O8558 (X4)
Locator® replacement male Extra-light retention
insert ≈ 226 – 680 g
RED ≈ 0.5 – 1.5 lbs*
Nylon O8548 (X4)
Locator® replacement male Light retention
insert ≈ 907 g
ORANGE ≈ 2.0 lbs*
Nylon O8915 (X4)
Locator® replacement male Medium retention
insert ≈ 1361 – 1814 g
GREEN ≈ 3.0 – 4.0 lbs*
Nylon O8547 (X4)
*lbs: pounds
Locator® auxiliaries
Locator® torque wrench insert
driver Stainless steel
Length: 15 mm O8260
Locator® core tool
three-part Stainless steel
Length: 100 mm O8393
Locator® torque wrench insert
latch Stainless steel
Length: 23 mm O8913
44 45Axiom® BL Axiom® TL Axiom® BL Axiom® TL
Ball attachment Ball abutments
REMOVABLE OVERDENTURE RETENTION SYSTEM FOR AXIOM® BL AXIOM® TL
EDENTULOUS PATIENTS GINGIVAL GINGIVAL N/∅ 4.0 mm R/∅ 4.8 mm
HEIGHT HEIGHT PLATFORM PLATFORM
+4
gingival heights, for Axiom® BL and Axiom® TL implants
1.5 mm AXDA015 0.0 mm TAXDA000-N TAXDA000-R
+ Time-proven and well-established ball-and-socket system offering reliability and wear resistance 2.5 mm AXDA025 1.0 mm TAXDA010-N TAXDA010-R
3.5 mm AXDA035 2.0 mm TAXDA020-N TAXDA020-R
+C
ompact shape of attachment and lamellae retention system offering perfect adjustment
4.5 mm AXDA045 3.0 mm TAXDA030-N TAXDA030-R
of matrix on ball
+ Divergence compensation up to 40°
Secondary parts
Ball abutment analog
Titanium
2.25 mm
AXDA100
2.25 mm
Dalbo®-PLUS system
3.6 mm Titanium
3.6 mm
Ø 4 mm Including female part and red
duplicating aid
O55752
Ø 4.8 mm
GH
GH
Auxiliaries
Dalbo® screwdriver activator
Stainless steel
O72609
Octogonal wrench for o’ring
For AXIOM® BL For AXIOM® TL Stainless steel
R/ 4.8 mm
INCOIO
Short octogonal mandrel for
o’ring Stainless steel
Length: 20.5 mm INMOICO
Long octogonal mandrel for
o’ring Stainless steel
Length: 27.5 mm INMOILO
46 47Axiom® BL Axiom® TL Labside range Axiom® BL Axiom® TL Labside range
Flexibase® range FOR AXIOM® BL SINGLE
CORONAL HEIGHT: 3.5 mm
FOR AXIOM® TL SINGLE
CORONAL HEIGHT: 3.5 mm
PLATFORM PLATFORM
FOR AXIOM® TL PLURAL
CORONAL HEIGHT: 3.5 mm
PLATFORM PLATFORM
GINGIVAL Ø 4 mm Ø 5 mm
R/4.8 mm N/4.0 mm R/4.8 mm N/4.0 mm
FOR CUSTOMIZED SCREW-RETAINED RESTORATIONS, HEIGHT
M1.6 black screw included OPTS160 M1.6 black screw included TS160 M1.6 black screw included TS160P
PRODUCED IN DENTAL LABORATORY
A comprehensive range for Axiom® BL and Axiom® TL 1.5 mm
Removable
with the OPFLEX413 OPFLEX513
PROSTHESIS
gripper
+ For single and plural restorations INEXPS/L
+C
hoice of gingival emergence profiles and platform to cover all indications 2.5 mm
+ Manufacturing of suprastructure with in-house milling or conventional technique OPFLEX423 OPFLEX523
+ exocad® / 3Shape® / Dental Wings® CAD libraries available for free TFLEX-R TFLEX-N TFLEX-R-P TFLEX-N-P
3.5 mm
OPFLEX433 OPFLEX533
Cast coping
OPFLEXC403 OPFLEXC503 TFLEXC-R TFLEXC-N TFLEXC-N-P TFLEXC-R-P
Short labora-
tory screw
TS163 TS163P-2 (X2)
Long labora-
Axiom® BL Axiom® TL single Axiom® TL plural Multi-Unit tory screw
OPTS162 TS162 TS162P-2 (X2)
Manual
< 10 N.cm
Laboratory
Scan Adapter
152-27-SAA 156-0X-SAA 156-0X-SAO
Wrench for
Scan-Adater
SATOOL-01
All trademarks and company names are the property of their respective owners.
Hexagonal screwdriver.
For impression components, please refer to pages 20 -22.
48 49Axiom® BL Axiom® TL Labside range Axiom® BL Axiom® TL Labside range
Flexibase® for plural screw-retained restorations on Multi-Unit abutments
Pre-milled range
15
FOR CUSTOMIZED ABUTMENTS, PRODUCED IN DENTAL LABORATORY
Black screw M140 included PLATFORM R/4.8 mm PLATFORM N/4.0 mm A comprehensive range for Axiom® BL and Axiom® TL
CORONAL HEIGHT: 5.0 mm CORONAL HEIGHT: 4.0 mm
Flexibase Multi-Unit +P
reFace abutments with MEDENTiKA® holder compatible with following CAM
PROSTHESIS
softwares: DS CAM*, Hyperdent*, Imes-Icore*, Picasoft*, Sum 3D*, VHF® and WorkNC®.
MUFLEX MUNFLEX +T
I-Forms-Abutments with Amann Girrbach® holder
Cast coping compatible with Straumann® CARES® M Series.
+P
reFace abutments available in 2 diameters
to cover all indications.
MUFLEXC MUNFLEXC
M 1.4 Titanium laboratory screw
MU141
PreFace abutments in titanium - MEDENTiKA® holder
Multi-Unit laboratory screw Short Long
FOR AXIOM® BL FOR AXIOM® TL
MUT101 MUT102 Definitive titanium M1. 6 included
PLATFORM N/4.0 mm PLATFORM R/4.8 mm
Laboratory Scan Adapter
Manual Ø 11.5 mm
< 10 N.cm
OPPM-M-TI-11 TPM-M-TI-N11 TPM-M-TI-R11
151-03-SAO 151-04-SAO
Ø 16.0 mm
Hexagonal screwdriver.
OPPM-M-TI-16 TPM-M-TI-N16 TPM-M-TI-R16
For Multi-Unit components, please refer to pages 32-37.
For impression components, please refer to pages 35-36.
TI-Forms-Abutments in titanium for M-Series -
Amann Girrbach® holder for Ceramill
FOR AXIOM® BL FOR AXIOM® TL
Definitive titanium M1. 6 included
PLATFORM N/4.0 mm PLATFORM R/4.8 mm
Ø 11.5 mm
Availability to be confirmed OPPM-C-TI-11 TPM-C-TI-N11 TPM-C-TI-R11
Hexagonal screwdriver. *All trademarks and company names are
50 For impression components, please refer to pages 20-22. the property of their respective owners. 51Axiom® BL Axiom® TL Labside range
Cerec® compatible Ti-base range
FOR CUSTOMIZED SINGLE-UNIT SCREW-RETAINED RESTORATIONS,
PRODUCED IN DENTAL OFFICE
A consistent range for Axiom® BL and TL
+ Axiom® BL: 3 gingival heights
+A
xiom® TL: 2 platforms
+C
ompatible with Dentsply Sirona®
Cerec® digitalization and milling solutions
Ø 4.5 mm
Ht** 1.3 mm
Axiom® BL Axiom® TL
FOR AXIOM® BL
FOR AXIOM® TL
- SIZE L BLOCK
GINGIVAL PLATFORM R/4.8 mm PLATFORM N/4.0 mm
Ø 5.0 mm
HEIGHT SIZE L BLOCK SIZE S BLOCK
M1.6 black screw included OPTS160 M1.6 black screw included TS160
1.5 mm
OPBASE-C501-L
Removable with
the gripper
INEXPS/L
2.5 mm
OPBASE-C502-L
TBASEC-R-L TBASEC-N-S
3.5 mm
OPBASE-C503-L
Hexagonal screwdriver.
52 53Axiom® BL Axiom® TL Simeda® prosthesis with Angulated Access Axiom® BL Axiom® TL Simeda® prosthesis with Angulated Access
Temporary components for AxIN®
AxIN®
AXIOM® BL AXIOM® TL
SIMEDA® CUSTOMIZED SCREW-RETAINED TOOTH WITH ANGULATED GINGIVAL PLATFORM PLATFORM
ACCESS MILLED AT ANTHOGYR CENTER, LUXEMBOURG. HEIGHT
Ø 4.0 mm Ø 5.0 mm
R/4.8 mm N/4.0 mm
AxIN® base
+ For all sectors 1.5 mm
Screw
+ No glue, no sealing cement: biological safety included Dedicated black
screw included
PROSTHESIS
AXIN152-27-S1 AXIN156-02-B AXIN156-01-B
+ Narrow angulated channel: 2 mm
AXIN152-27B41 AXIN152-27B51
+ Screw integrated in the restoration: easy handling
Dedicated screw included
+ AxIN® base and crown delivered in one piece 2.5 mm
Dedicated black
screw included
Removable with
the gripper AXIN152-27S2
INEXPS/L AXIN152-27B42 AXIN152-27B52 AXIN156-0X-S
AXIOM® BL AXIOM® TL
PLATFORM PLATFORM
ANGULATION Ø 4.0 mm Ø 5.0 mm
SIMEDA® ZIRCONIA R/4.8 mm N/4.0 mm
CUSTOMIZED
10°
25° RESTORATION AxIN®
temporary
crown
AXIN-C-40-10 AXIN-C-50-10 AXIN-C-48-10 AXIN-C-40-10
15°
AXIN-C-40-15 AXIN-C-50-15 AXIN-C-48-15 AXIN-C-40-15
REDUCED CHANNEL
Ø 2.0 mm 25°
AXIN-C-40-25 AXIN-C-50-25 AXIN-C-48-25 AXIN-C-40-25
Free angulation between
0° and 25°
AxIN®
protection AXIN-PCC-40 AXIN-PCC-50 AXIN-PCC-48 AXIN-PCC-40
AXIN® BASE cap
Ball screwdriver.
For impression components, please refer to pages 20-22.
54 55Axiom® BL Axiom® TL Simeda® prosthesis with Angulated Access
AxIN® laboratory parts
ManualAxiom® BL Axiom® TL Simeda® prosthesis with Angulated Access Axiom® BL Simeda® prosthesis with Angulated Access
Prosthetics on inLink® connection InLink® abutments for Axiom® BL implants
AN INNOVATIVE SOLUTION FOR PLURAL
SCREW-RETAINED RESTORATIONS WITH ANGULATED ACCESS
AXIOM® BL
+ F or implant bridges and suprastructures Q PLATFORM R/4.8 mm PLATFORM N/4.0 mm
in Titanium, Cobalt-Chromium or Zirconia Gingival height 2.5 mm
PROSTHESIS
+H
igh benefits for full-arch restorations
OPIL-R2 OPIL-N2
Gingival height 3.5 mm
OPIL-R3 OPIL-N3
SHORT LONG
ANGULATED
ACCESS
InLink® abutment mandrel
TIM100S TIM100L
InLink® abutment wrench
TIW100S TIW100L
DIRECT ON
INNOVATION AXIOM® TL
INLINK® INTEGRATED
LOCK SYSTEM
ON AXIOM® BL WITH
INLINK® ABUTMENT
58 59Axiom® TL Simeda® prosthesis with Angulated Access Axiom® TL Simeda® prosthesis with Angulated Access
InLink® components for conventional impression taking InLink® temporary components
AXIOM® TL / INLINK® ABUTMENT
AXIOM® TL / INLINK® ABUTMENT
Manual
ANGULATION SUPPLIED WITH PLATFORM R/4.8 mm PLATFORM N/4.0 mm
PLATFORM R/4.8 mm PLATFORM N/4.0 mm
Definitive STANDARD
Pick-up transfer
lock
for Axiom® TL / InLink® abutment
1 short + 1 long screw included
ILC100-R ILC100-N
Definitive GUIDING
PROSTHESIS
ILT100-R ILT100-N lock
ILT100-R-4 (X4) ILT100-N-4 (X4) 0°
Pop-in transfer
ILGC100-R ILGC100-N
for Axiom® TL / InLink® abutment
Try-in lock (GREEN)
and definitive STANDARD
ILT200-R-4 ILT200-N-4 lock
Axiom® TL / inLink® abutment analog
ILC100T-R ILC100T-N
Definitive STANDARD
lock
TA100-R TA100-N
TA100-R-4 (X4) TA100-N-4 (X4)
ILC110-R ILC110-N
10°
InLink® components for digital impression taking Definitive GUIDING
lock
AXIOM® TL / INLINK® ABUTMENT
PLATFORM R/4.8 mm PLATFORM N/4.0 mm ILGC110-R ILGC110-N
Digital transfer Definitive STANDARD
for Axiom® TL / InLink® lock
abutment
Screw included
ILC115-R ILC115-N
156-02-DT-IL 156-01-DT-IL
15° Definitive GUIDING
Axiom® TL / inLink® analog for lock
printed model
ILGC115-R ILGC115-N
Definitive STANDARD
lock
156-02-PA 156-01-PA
156-02-PA-4 (X4) 156-01-PA-4 (X4)
ILC125-R ILC125-N
InLink® scan accessories Definitive GUIDING
lock
AXIOM® TL / INLINK® ABUTMENT
25°
Scan-Adapter
ManualAxiom® TL Simeda® prosthesis with Angulated Access
InLink® laboratory components
STANDARD GUIDING
Lock
ILL100 ILLG100
ILL100-4 (X4) ILLG100-2 (X2)
Lock on carrier
ILL200 ILLG200
Try-in Lock
ILL100T-4 (X4) ILLG100T-4 (X4)
Laboratory lock
ILL300
ILL300-4 (X4)
PLATFORM R/4.8 mm PLATFORM N/4.0 mm
Screwed protective cap
ILPCSR ILPCSN
ILPCSR-4 (X4) ILPCSN-4 (X4)
Clipped protective cap
ILPCCR ILPCCN
ILPCCR-4 (X4) ILPCCN-4 (X4)
Channel rod Ø 2.0 mm for inLink®
permanent prosthesis or for inLink®
0° temporary abutment
CR20-4 (X4)
Channel rod Ø 2.5 mm for inLink®
10/15/25° temporary abutment
CR25-4 (X4)
62 63Axiom® BL Axiom® TL Simeda® prosthesis with Angulated Access Axiom® BL Axiom® TL Simeda® prosthesis with Angulated Access
Simeda® customized screw-retained For Multi-Unit abutment range and secondary components, see pages 32-37.
Multi-Unit temporary abutments with Angulated Access
bars & bridges on Multi-Unit abutments 15
M1.4 Titanium screw with AA included MUAA141
ANGULATED ACCESS SOLUTION ANGULATION
MULTI-UNIT MULTI-UNIT
Ø 4.8 mm Ø 4.0 mm
+ Perfect fit of customized prosthesis
+ Screw channels outside visible or fragile areas
PROSTHESIS
0°
+ For all screw channels
MUCAA100 MUNCAA100
+ Ease of use: delivered with a AA screw gripper
+ F or implant bridges and suprastructures
10°
in Titanium, Cobalt - Chromium or Zirconia
MUCAA110 MUNCAA110
15°
ANGULATED ACCESS
UP TO 25° MUCAA115 MUNCAA115
25°
MUCAA125 MUNCAA125
Related accessories
M1.4 titanium screw with AA
MUAA141
Blue laboratory screw M1.4 with AA
MUAA142-4 (X4)
AA screw gripper
AATOOL
Channel rod Ø 2.5 mm for MUAA
temporary or permanent prosthesis
CR25-4 (X4)
Ball screwdriver.
64 65Axiom® BL Axiom® TL Surgical instruments and accessories Axiom® BL Axiom® TL Surgical instruments and accessories
Surgery kits and instruments Axiom® Multi Level®
1 SINGLE COMPACT SURGICAL KIT
Surgery kit
FOR ALL AXIOM® BL AND AXIOM®TL, REG AND PX PROFILES
+ Simplicity
+ Freedom and flexibility
• Possibility to adapt the implant choice during surgery
+ User friendly
• Complementary solutions
Reversible ratchet wrench
Gauge
INSTRUMENTS & ACCESSORIES
Manual surgical wrench Implant screwing
wrenches and mandrels
Implant screwing wrenches Axiom® TL
and mandrels Axiom® BL
Tapping devices
Long drills
Short drills
Mandrel extension Pointer drill
Empty grommets
for mandrels or wrenches
+ Hard biocompatible coating drills
+S
urface treatment optimizing
depth marks visibility in mouth
66 67Axiom® BL Axiom® TL Surgery Axiom® BL Axiom® TL Surgery
Surgery kits, instruments and accessories for Axiom® BL and Axiom® TL DIAMETER SHORT LONG
USE Round bur*
INFB20
Axiom® Multi Level® 1.5 mm
Pointer drill
surgery kit OPPO15150
For Axiom BL and TL,
®
REG and PX profiles
Lindemann bur* 2.0 mm
OPR20
INMODOPS3
Initial drill 2.0 mm
Empty Axiom® Multi Level® INMODOPS3V
surgery kit OPFI20S OPFI20L
Update kit for Axiom® To update an Axiom® BL kit
KITUPOPS3
Multi Level® surgery kit to an Axiom® Multi Level® kit 2.0/ 2.4 mm
OPFE24S OPFE24L
Manual surgical wrench
INSTRUMENTS & ACCESSORIES
OPCS100
2.4/ 3.0 mm
Mandrel extension OPFE30S OPFE30L
INEXM
Step drill 3.0/ 3.6 mm
Mandrel wrench
INCPM
OPFE36S OPFE36L
Reversible ratchet wrench
INCC
3.6/ 4.2 mm
Surgical dynamometrical 0 to 80 N.cm OPFE42S OPFE42L
wrench* INCCDC
4.2/ 4.8 mm
Axiom® dual function depth
gauge* OPFE48S OPFE48L
OPJC001
Pack of 6 step drills Assorted
Drill guide
OPFES-6 OPFEL-6
INGPPA
Pack of 12 step drills
Angled drilling guide* Assorted
(6 XS + 6 XL)
INGFA
OPFESL-12
* Not included in INMODOPS3 kit.
* Not included in INMODOPS3 kit.
68 69Axiom® BL Axiom® TL Surgery Axiom® BL Axiom® TL Surgery
DIAMETER SHORT MEDIUM LONG
Axiom® BL implant mandrel OPMV180 OPMV215* OPMV250
3.4 mm
23 mm 27 mm 32 mm
OPTA34L
Axiom® BL manual wrench
OPCV060 OPCV110* OPCV160
4.0 mm 21 mm 27 mm 31 mm
OPTA40L Axiom® BL implant manual screw
Implant tap wrench (with screwdriver)
INPIM* INPIL
4.6 mm
OPTA46L Axiom® TL implant mandrel TIM100S TIM100L
19 mm 29 mm
5.2 mm
OPTA52L Axiom® TL abutment wrench
TIW100S TIW100L
INSTRUMENTS & ACCESSORIES
22 mm 32 mm
Pack of 4 taps Assorted
OPTA-4 Screw extraction mandrel*
INMDS INMDL
2.0 mm
OPJD020 * Not included in INMODOPS3 kit.
2.4 mm
Calibrating films / X-ray templates
OPJD024
REG PX
3.0 mm Axiom® BL
OPFC_NOT PXFC_NOT
OPJD030
Gauge
Axiom® TL
TOPFC_NOT TPXFC_NOT
3.6 mm
OPJD036
4.2 mm
OPJD042*
4.8 mm
OPJD048*
* Not included in INMODOPS3 kit.
70 71Axiom® BL Axiom® TL Surgery Axiom® BL Axiom® TL Surgery
Axiom® Multi Level® MG Kit
TO EASILY MARK IMPLANT POSITION REGARDING AN ADJACENT Axiom® MG Kit and instruments
TOOTH OR AN IMPLANT
+Q
uick and easy guidance
+ I mmediate solution
Axiom® implant pre-positioning MG Kit
+R
eusable and cost efficient
+T
ime saving
INGUIDE
Parallelizing drill guide
To position referring with smart 2-in-1 rod
INSTRUMENTS & ACCESSORIES
to an implant bed
INGPPA
Smart reversible 2-in-1 rod
Centering rings
• To position referring to
Pointer drill Ø1.5
an adjacent tooth
• 2 diameters OPPO15
To position referring
to an Axiom® BL
implant
Pointer drill Paralleling drill guide Centering ring Ø8.0
OPR8
Centering ring Ø10
OPR10
Empty micro-cassette for surgical
instrument storage and sterilization
A 3-in-1 solution providing PS502107
immediate guidance
72 73Axiom® BL Axiom® TL Surgery Axiom® BL Axiom® TL Surgery
Axiom® Multi Level® Dense Bone Kit Axiom® cortical step drill Ø 3.0 / 3.2 S
PXFE32S
TO FACILITATE THE PLACEMENT OF AXIOM® REG AND
PX IN HIGH BONE DENSITIES
Axiom® cortical step drill Ø 3.6 / 3.8 S
PXFE38S
+C
ompact kit dedicated to dense bone
indications, to be used in addition to
Axiom® Multi Level® surgery kit Axiom® cortical step drill Ø 4.2 / 4.4 S
+S
hort step cortical drills to reduce PXFE44S
cortical bone constraint,
for Axiom® REG and PX
Axiom® cortical step drill Ø 4.8 / 5.0 S
+S
pecific Axiom® PX taps for D1 bone
PXFE50S
INSTRUMENTS & ACCESSORIES
Pack of 4 Axiom® cortical step drills S
PXFES-4
Axiom® PX tap Ø 3.4 L for dense bone
Clear identification thanks
to a specific marking
PXTA34L
Axiom® PX tap Ø 4.0 L for dense bone
PXTA40L
Axiom® Multi Level® dense Bone kit and instruments
Axiom® PX tap Ø 4.6 L for dense bone
Axiom® Dense Bone surgery kit PXTA46L
INMODCP Axiom® PX tap Ø 5.2 L for dense bone
PXTA52L
Empty Axiom® Dense Bone surgery kit
Pack of 4 Axiom® PX taps L for dense bone
INMODCPV PXTAL-4
74 75Axiom® BL Axiom® TL Surgery Axiom® BL Axiom® TL Surgery
Axiom® Multi Level® countersinks
Axiom® Multi Level® countersinks AXIOM® TL
DIAMETER AXIOM® BL PLATFORM PLATFORM
TO OPTIMIZE BONE CREST PREPARATION FOR EASIER IMPLANT R/4.8 mm N/4.0 mm
AND PROSTHETIC PLACEMENT
Pack of 3 Axiom® BL countersinks
+ I nvasiveness management with pins
Assorted - -
+A
ccurate and safe guidance
OPFF-3
+G
uarantee of a proper final seating
4.5 mm - -
OPFF45
Axiom® BL countersink with pin 5.3 mm - -
OPFF53
6.6 mm - -
OPFF66
INSTRUMENTS & ACCESSORIES
AXIOM® BL AXIOM® TL Axiom® BL countersink pin - - -
OPFFP
Pack of 7 Axiom® TL countersinks Assorted -
TOPFF-7
3 diameters 2 diameters R/N
Smart window 2.4 mm -
TOPFF24R TOPFF24N
for depth control
Visual marking
3.0 mm -
For depth TOPFF30R TOPFF30N
control
Axiom® TL countersink
3.6 mm -
TOPFF36R TOPFF36N
Guiding pin Guide
4.2 mm - -
4 diameters
TOPFF42R
76 77Axiom® BL Axiom® TL Surgery Axiom® BL Axiom® TL Surgery
INITIAL Guided surgery INITIAL SURGICAL KITS
FIRST DRILL GUIDING SOLUTION TO ENSURE PRECISE
POSITIONING OF THE IMPLANT AXIS AND EMERGENCE POINT
+ High precision instruments Guided surgery kit INITIAL
+ Compatibility with various kinds of implant planning software
+ Compact kit and ergonomic instruments
INMODIGM
Empty Guided surgery kit INITIAL INMODIGMV
INITIAL SETS CONTENTS
1 x Guided centering drill
Guided surgery set INITIAL INSETIGM
2 x Guided initial drills Ø 2.0 (S + L)
INSTRUMENTS & ACCESSORIES
1 x Guided centering drill
Complete guided surgery set INITIAL 2 x Free guided pointer drills (S + XL) INSETIGMF
3 x Guided initial drills M 2.0 (S + L + XL)
INITIAL INSTRUMENTS SHORT LONG XL
Guided centering drill
OPGPDM
Free guided pointer drill -
OPGPDMS OPGPDMXL
INITIAL guided drill Ø 2.0
OPGDM-20S OPGDM-20L OPGDM-20XL
Pin drill
OPFPD20
ACCESSORIES
Sleeve Ø 2.0 mm OPGS20
OPGS20-4 (X4)
OPGS20-10 (X10)
Pin sleeve
OPFPSL20-3 (X3)
OPFPSL20-5 (X5)
Fixation pin
OPFP20
78 79Axiom® BL Axiom® TL Surgery Axiom® BL Axiom® TL Surgery
Axiom® Multi Level® Drill stop kit DDRILL STOP KIT
ERGONOMIC AND USER-FRIENDLY Axiom® Multi Level® drill stop kit
12 short drill stops (S) and 24 long drill stops (L)
+ Easy drill top pick up with contra-angle INKITOPDS
Axiom® REG/PX drill stop box
+ Anti-falling system (empty) INKITOPDSV
+ Color coding facilitating identification
STOP FOR S DRILLS STOP FOR L DRILLS
Drill
diameter
Implant Ø 2.0 / 2.4 / Ø 2.0 / 2.4 /
INSTRUMENTS & ACCESSORIES
length 3.0 mm Ø 3.6 mm Ø 4.2 mm Ø 4.8 mm 3.0 mm Ø 3.6 mm Ø 4.2 mm Ø 4.8 mm
OPB3006C OPB3606C OPB4206C OPB4806C OPB3006L OPB3606L OPB4206L OPB4806L
6 mm
Ø 3.0 mm Ø 3.6 mm Ø 4.2 mm Ø 4.8 mm Ø 3.0 mm Ø 3.6 mm Ø 4.2 mm Ø 4.8 mm
OPB3008C OPB3608C OPB4208C OPB4808C OPB3008L OPB3608L OPB4208L OPB4808L
8 mm
Ø 3.0 mm Ø 3.6 mm Ø 4.2 mm Ø 4.8 mm Ø 3.0 mm Ø 3.6 mm Ø 4.2 mm Ø 4.8 mm
OPB3010C OPB3610C OPB4210C OPB4810C OPB3010L OPB3610L OPB4210L OPB4810L
10 mm
Ø 3.0 mm Ø 3.6 mm Ø 4.2 mm Ø 4.8 mm Ø 3.0 mm Ø 3.6 mm Ø 4.2 mm Ø 4.8 mm
OPB3012L OPB3612L OPB4212L OPB4812L
12 mm
Ø 3.0 mm Ø 3.6 mm Ø 4.2 mm Ø 4.8 mm
OPB3014L OPB3614L OPB4214L OPB4814L
14 mm Ø 3.0 mm Ø 3.6 mm Ø 4.2 mm Ø 4.8 mm
OPB3016L OPB3616L
16 mm Ø 3.0 mm Ø 3.6 mm
OPB3018L OPB3618L
18 mm Ø 3.0 mm Ø 3.6 mm
80 81Axiom® BL Axiom® TL Prosthesis Axiom® BL Axiom® TL Prosthesis
Axiom® Multi Level® prosthetic kit Axiom® Multi Level® Prosthetic kit
+ All types of prothetic restorations Hexagonal wrenches
short and long
+ Complete and compact
Hexagonal mandrels
+ Ergonomic: convenient to use short and long
inLink® abutment
Dynamometric ratchet tightening mandrels,
+ Customizable: free gommets for additionnal instruments wrench short and long
+ Secure: can be cleaned and sterilized inLink® abutment
tightening wrenches, Ball mandrels, short
short and long and long
Ball wrenches, short
BL abutments and long
Extractor-Gripper Straight Multi-Unit
mandrel
Straight Multi-Unit
INSTRUMENTS & ACCESSORIES
wrench
Prosthetic kits and instruments for Axiom® BL and Axiom® TL prosthesis
USE
Axiom® Multi Level® For Axiom® BL and TL
prosthetic kit prosthetic components
INMODOPP3
Empty Axiom® Multi Level®
prothetic kit INMODOPP3V
Update kit for Axiom® Multi To update an Axiom® BL kit
Level® prosthetic kit KITUPOPP3
to an Axiom® ML kit
Dynamometrical
ratchet wrench 15/25/35 N.cm
INCCD
82 83Axiom® BL Axiom® TL Prosthesis Axiom® BL Axiom® TL Prosthesis
Instruments for Axiom® BL and Axiom® TL prosthesis
Torq Control® SHORT LONG XL USE
UNIVERSAL DYNAMOMETRIC TORQUE WRENCH Hexagonal mandrel
INMHECV INMHELV INMHEXLV
20 mm 27 mm 35 mm Main components on
Axiom® BL and on
Compatible with all implant systems Axiom® TL
Hexagonal wrench
+ Universal connection of the prosthetic mandrels
INCHECV INCHELV INCHEXLV
14 mm 21.5 mm 29 mm
+ 7 torque levels (10 to 35 N.cm)
+ Automatic declutching when the selected torque is reached Ball mandrel
INBM100S INBM100L INBM100XL
20.5 mm 27 mm 35 mm
+M
icro-head, 100° angulated for easy access Angulated Access
and optimal visibility, even in posterior sectors screw channels
Ball wrench
+ One-piece design for easy cleaning INBW100S INBW100L INBW100XL
INSTRUMENTS & ACCESSORIES
23 mm 29 mm 37 mm
Multi-Unit mandrel
MUM100 MUM100L
For straight
16 mm 25.5 mm
Multi-Unit
abutments
Multi-Unit wrench
MUW100
Short prehensile tool
for Multi-Unit
MUWS
Wrench for analog for
print model
For all analogs for
2 protective caps printed model
included
PA-TOOL-01CAP PA-TOOL-01
1st prosthetic set
Mandrel:
PROSTHSET-MS PROSTHSET-ML
Hexagonal +
USE Multi-Unit + Ball
Torques up to 35 N.cm 1st prosthetic set
Torq Control universal
Compatible with all implant systems Wrench:
dynanometric wrench PROSTHSET-WS PROSTHSET-WL
Hexagonal +
Multi-Unit + Ball
15501
Disconnector and
Gripper for Axiom® BL
abutment
32.4 mm INEXPS 35.4 mm INEXPL
84 85Axiom® BL Axiom® TL Prosthesis Axiom® BL Axiom® TL Prosthesis
SHORT LONG USE Laboratory kits
Axiom® TL / inLink® AXIN® LABORATORY KIT - AXIOM® MULTI LEVEL® REF AXINLABKITAML
abutment mandrel
TIM100S TIM100L Axiom® TL /
inLink® abutment 1x AxIN® key Axiom® Multi Level®
Axiom® TL / inLink® AXIN-TOOL-AML
abutment wrench
TIW100S TIW100L
1x Ball wrench
AxIN® key Axiom® INBW100L
AxIN® for Axiom® BL and TL
Multi Level®
6x AxIN® laboratory bases assorted (1 of each below references)
AXIN-TOOL-AML
Laboratory screw included
AXIOM® BL AXIOM® TL
inLink® 2 in 1 key
IL-TOOL2 inLink® GINGIVAL HEIGHT Ø 4.0 mm Ø 5.0 mm PLATFORM R/4.8 mm PLATFORM N/4.0 mm
connection
inLink® Removal tool
IL-TOOL1 1.5 mm
Wrench for O'Ring AXIN152-27L41 AXIN152-27L51
INSTRUMENTS & ACCESSORIES
INCOIO
Octogonal mandrel / Dalbo ball
O’Ring abutments 2.5 mm
INMOICO INMOILO
Dalbo® hand screw
AXIN152-27L42 AXIN152-27L52 AXIN156-02-L AXIN156-01-L
tightening spring
O72609 LABORATORY STARTER KIT FOR INLINK® CONNECTION - AXIOM® MULTI LEVEL® REF ILLABSTARTKIT
3x standard 1x guiding
LOCATOR® mandrel
Ref. 8913 O8913 4x Try-in Locks
LOCATOR® key If ordered separately ref ILL100T-4 If ordered separately ref ILLG100T-4
Ref. 8260 LOCATOR®
O8260 4x Laboratory Locks
ILL300-4 (X4)
LOCATOR® 3 in 1 key
4x R platform 4.8 mm
Ref. 8393
O8393
4x Clipped protective caps
Scan-Adapter
All Scan Adapters
tightening tool
SATOOL-01 ILPCCR-4 (X4)
1x short 1x long
2x LAB M1.6 screw Axiom® TL
TS163 TS162
1x Ball wrench
INBW100L
1x inLink® 2 in 1 key
IL-TOOL2
86 87Axiom® BL Axiom® TL Prosthesis Axiom® BL Axiom® TL Prosthesis
Digital Transfers for Intra Oral Scanners and analogs for printed models Laboratory Scan-Adapters for Axiom® BL and TL Platforms
SINGLE-UNIT RESTORATIONS ON AXIOM® BL AND AXIOM® TL SINGLE-UNIT RESTORATIONS ON AXIOM® BL AND AXIOM® TL
AXIOM® BL AXIOM® TL (single-unit) AXIOM® BL AXIOM® TL
Digital transfer – Single PLATFORM R/4.8 mm PLATFORM N/4.0 mm
Scan-Adapter
Screw included
Laboratory screw included
152-27-DT 156-02-DT 156-01-DT
Analog for printed model 152-27-SAA 156-0X-SAA
Laboratory screw included
MULTIPLE-UNIT RESTORATIONS ON MULTI-UNIT ABUTMENTS
152-27-PA 156-02-PA 156-01-PA MULTI-UNIT R/4.8 mm MULTI-UNIT N/4.0 mm
152-27-PA-4 (X4) 156-02-PA-4 (X4) 156-01-PA-4 (X4)
Scan-Adapter
INSTRUMENTS & ACCESSORIES
MULTIPLE-UNIT RESTORATIONS ON MULTI-UNIT ABUTMENTS
Laboratory screw included
PLATFORM Ø 4.8 mm PLATFORM Ø 4.0 mm
Axiom® BL Multi-Unit digital transfer
Screw included
151-03-SAO 151-04-SAO
151-03-DT-MU 151-04-DT-MUN
Analog for print model Multi-Unit
MULTIPLE-UNIT RESTORATIONS ON AXIOM® TL OR INLINK® ABUTMENT
Laboratory screw included
AXIOM® TL / INLINK® ABUTMENT
151-03-PA 151-04-PA
151-03-PA-4 (X4) 151-04-PA-4 (X4) Scan-Adapter
MULTIPLE-UNIT RESTORATIONS ON AXIOM® TL OR INLINK® ABUTMENT
PLATFORM R/4.8 mm PLATFORM N/4.0 mm Laboratory screw included 156-0X-SAO
Digital transfer
(TL / InLink® abutment)
Scan-Adapter tightening tool
Screw included
SA TOOL-01
156-02-DT-IL 156-01-DT-IL
Axiom® TL / inLink® analog
for printed model
Laboratory screw included
156-02-PA 156-01-PA
156-02-PA-4 (X4) 156-01-PA-4 (X4)
88 89Axiom® BL Axiom® TL Prosthesis
Scan-Adapters kits
AXIOM® MULTI LEVEL® SA KIT REF 151-02-KIT
1 X AXIOM® BL 1x AXIOM® TL
2x SAA Scan-Adapters
Laboratory screw included
152-27-SAA 156-0X-SAA
MULTI-UNIT R/4.8 mm MULTI-UNIT N/4.0 mm
4x Multi – Unit SAO Scan-Adapter
Laboratory screw included
151-03-SAO 151-04-SAO
4x InLink® SAO Scan-Adapter
Laboratory screw included
156-0X-SAO
1 x Scan-Adapter screwdriver
SATOOL-01
AXIOM® SA UPGRADE KIT REF 151-02-KITUP
1x SAA Scan-Adapters
Laboratory screw included
156-0X-SAA
4x InLink® SAO Scan-Adapter
Laboratory screw included
156-0X-SAO
90 91Axiom® BL Axiom® TL Prosthesis Axiom® BL Axiom® TL Prosthesis
PROSTHETIC SCREWS FOR AXIOM® BL PROSTHETIC SCREWS FOR AXIOM® TL
TIGHTENING TOOL BLACK TITANIUM LABORATORY HEXAGONAL BLACK TITANIUM LABORATORY
Short Long
M1.6 prosthetic screw
M1.6 Axiom® TL screw TS160 TS161
OPTS162 TS163
25 N.cm
Manual Single-unit Manual
OPTS160 OPTS161
HEXAGONAL 25 N.cm 15 N.cm
AxIN® screw M1.6 TS162
Manual
Axiom® BL H 1.5 mm
AXIN152-27-S1 AXIN152-27-SL1
25 N.cm Manual
HEXAGONAL
AxIN® screw M1.6
Plural
INSTRUMENTS & ACCESSORIES
Axiom® BL H 2.5 mm
BALL
AXIN152-27-S2 AXIN152-27-SL2
25 N.cm Manual
TS160P TS163P-2 (X2) TS162P-2 (X2)
M1.6 screw for Axiom®
Multi-Unit abutment
OPMU160 OPMU161
25 N.cm OPMU161-4 (X4)
Manual
AxIN® screw M1.6 Axiom® TL
M1.4 Multi-Unit screw
MU140 MU140Z MU141
AXIN156-0X-S AXIN156-0X-SL
15 N.cm 15 N.cm Manual
BALL 25 N.cm Manual
Short Long
INLINK® LABORATORY COMPONENTS STANDARD GUIDING
Multi-Unit lab
screw HEXAGONAL
MUT101 MUT102
Manual Manual Lock
ILL100 or ILL100-4 (X4) ILLG100 or ILLG100-2 (X2)
Multi-Unit Lock on carrier
Angulated Access ILL200 ILLG200
M1.4 prosthetic screw
MUAA140 MUAA141 MUAA142-4 (X4) Try-in Lock
15 N.cm Manual
ILL100T-4 (X4) ILLG100T-4 (X4)
Angulated Access
screw gripper BALL AATOOL
Laboratory lock
ILL300 or ILL300-4 (X4)
92 93Axiom® BL Prosthesis
SURGERY
Try-In abutments for Axiom® BL
MADE OF MEDICAL TITANIUM, WITH TRILOBE INDEXATION
ά
Ch = 7 mm
PROSTHESIS
Ø = 4 mm
Gh
INSTRUMENTS & ACCESSORIES
AXIOM® BL
GINGIVAL HEIGHT STRAIGHT 0° ANGULATION 7° ANGULATION 15° ANGULATION 23°
0.75 mm
OPSF006 OPAF00-7 OPAF001 OPAF002
1.5 mm
OPSF016 OPAF01-7 OPAF011 OPAF012
2.5 mm
AXIOM® 2.8
OPSF026 OPAF02-7 OPAF021 OPAF022
3.5 mm
OPSF036 OPAF03-7 OPAF031 OPAF032
EQUIPMENTS
4.5 mm
OPSF046 OPAF04-7 OPAF041 OPAF042
94 95Surgical components Surgical components
Axiom® 2.8 COMPREHENSIVE PROSTHETIC
RANGE
CONICAL CONNECTION
• PEEK temporary abutment Tight seal morse tapered
The solution for restricted • One-stage or two-stage surgery connection with 3° angle
mesiodistal spaces in the
5.5
incisor area mm 4.0
mm 2.5 A NARROW DIAMETER
mm 1.0
IMPLANT FOR THE
• 3 implant lengths: 10, 12 and 14 mm mm
INCISIVE SECTOR
• 4 abutment angulations: 0°, 7°, 15° and 23° For cases with narrow mesiodistal
space, for single restorations.
• 4 gingival heights: 1.0, 2.5, 4.0 and 5.5 mm
Peek healing plugs PEEK cover plug
4 gingival heights
A TRUE NARROW
“TWO-PART” IMPLANT CONSTANT EMERGENCE PROFILE FROM STRAIGHT
• Optimal management of treatment HEALING PLUG TO FINAL ABUTMENT THREADED NECK
plan and soft tissues
• No undue tension on soft tissue Optimized anchorage
• Maintaining a diameter of 2.8 for both
the surgical and prosthetic profil
SMART IMPLANT
PACKAGING
• Orange color code
dedicated to Axiom® 2.8
DEDICATED SURGICAL AXIOM® 2.8
& PROSTHETIC KIT Cylindrical-conical shape implant
with controlled and guided insertion.
•E
asy, practical
and logic layout
96 97You can also read
