The Barista Pro - Breville
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
the Barista Pro™ EN INSTRUCTION BOOK FR-CA MANUEL D'INSTRUCTIONS ES-MX MANUAL DE INSTRUCCIONES
IMPORTANT
Contents
SAFEGUARDS
READ ALL
2 Breville Recommends INSTRUCTIONS BEFORE
Safety First
7 Components
USE AND SAVE FOR
9 Features FUTURE REFERENCE
10 Assembly • Carefully read all
12 Functions instructions before
19 Care & Cleaning
operating and save for
23 Troubleshooting
future reference.
• Do not touch hot
surfaces. Use handles or
knobs as advised in this
instruction book.
• To protect against
fire, electric shock and
injury to persons do not
immerse the power cord,
BREVILLE plug, or appliance itself
in water or other liquids.
RECOMMENDS • Close supervision is
SAFETY FIRST necessary when any
At Breville we are very safety appliance is used by
conscious. We design and or near children.
manufacture consumer
products with the safety of you, • If the appliance is to be:
our valued customer, foremost - left unattended
in mind. In addition we ask - cleaned
that you exercise a degree of - moved
care when using any electrical - assembled or
appliance and adhere to the - stored
following precautions.
2Always switch off the • Do not place the
appliance by pressing appliance near the edge
the POWER button to of a table or counter-top.
off and unplug from the Ensure the surface is level,
power outlet. clean and free of water
and other substances.
• Always allow the appliance
to cool before cleaning, • Do not place the
appliance on or near a
moving or storing.
hot gas or electric burner.
• It is recommended to Do not place it in, or allow
regularly inspect the it to come in contact with
appliance and power cord. a heated oven.
Do not use the appliance • Do not operate the
if there is damage to the appliance if it is in
power cord or plug, or after an enclosed space,
the appliance malfunctions or within a cupboard.
or has been damaged • This appliance is
in any way. recommended for
Immediately stop use household use only.
and call Breville Do not use this appliance
Consumer Support. for anything other than
• The use of accessory its intended use. Do
attachments not not use outdoors. Do
recommended by Breville not use in moving
vehicles or boats.
may result in fire, electric
shock or injury to persons.
• Do not let the power cord
hang over the edge of a
table or counter-top, or
touch hot surfaces.
3NOTICE TO the household where the CUSTOMERS product is used. If you have REGARDING MEMORY any questions regarding STORAGE the memory storage Please note that in order to chip please contact us at better serve our customers, privacy@breville.com internal memory storage SPECIFIC has been imbedded into INSTRUCTIONS your appliance. This FOR BES878 memory storage consists of a small chip to collect • It is recommended to plug certain information about the espresso machine your appliance including into a properly grounded the frequency of use of and dedicated circuit, the appliance and the separate from other manner in which your electrical appliances. appliance is being used. In • Avoid contact with the event your appliance moving parts. is returned for service, • Check bean hopper the information collected for presence of foreign from the chip enables us objects before using. to quickly and efficiently • Use only cold water in service your appliance. the water tank. Do not The information collected use any other liquids. Do also serves as a valuable not use highly filtered, resource in developing demineralized or distilled future appliances to better water as this may affect serve the needs of our the taste of the coffee consumers. The chip does and how the espresso not collect any information machine operates. regarding the individuals who use the product or 4
WARNING • For any maintenance
To avoid the risk of injury, other than cleaning,
do not open the brew call Breville Consumer
chamber during the Support or visit a Breville
brew process. Authorized Servicer.
• Ensure the portafilter SPECIFIC
is firmly inserted and INSTRUCTIONS FOR
secured into the group WATER FILTER
head before starting an • Filter cartridge should
extraction. Never remove be kept out of reach
the portafilter during the of children.
extraction process. • Store filter cartridges
• Caution must be used in a dry place in the
during descaling as hot original packaging.
steam may be released. • Protect cartridges from
Before descaling, turn heat and direct sunlight.
off the machine, allow
• Do not use damaged
to cool for at least 1 hour
filter cartridges.
and ensure the drip tray is
empty and fully inserted. • Do not open
For instructions, refer filter cartridges.
to the 'Descaling' • If you are absent for a
section on page 19. prolonged period of time,
• Do not attempt to empty the water tank and
open or service the replace the cartridge.
espresso machine.
5SHORT CORD BREVILLE ASSIST® INSTRUCTIONS PLUG Your Breville appliance is Your Breville appliance fitted with a short power comes with a unique cord to reduce personal Assist® Plug, conveniently injury or property damage designed with a finger hole resulting from pulling, to ease removal from the tripping or becoming power outlet. entangled with a longer cord. Longer detachable power cords or extension cords are available and may be used if care is exercised. If an extension cord is used, (1) the marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance, (2) the cord should be arranged so that it will not drape over the counter-top or table where it can be pulled on by children or tripped over unintentionally and (3) the extension cord must include a 3-prong grounding plug. FOR HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS 6
Components
A
B
C L
D M
N
E
O
F
P
G
Q
H R
I S
J
K
A. ½ lb (250g) bean hopper K. Removable drip tray
With locking system for easy removal, storage With tray full indicator.
and transfer of coffee beans. L. 68 fl.oz (2L) removable water tank
B. Integrated conical burr grinder With replaceable water filters
C. GRIND SIZE selector to reduce scale and impurities.
30 espresso grind settings from fine M. Steam dial
to coarse. Selector control for steam and hot water.
D. POWER button N. LCD display
E. Integrated removable 54mm tamper With grinding and extracting
F. Grinder outlet progress animations.
G. Grinding cradle O. Control panel
With MENU, GRIND AMOUNT/ FILTER
H. 54mm stainless steel portafilter SIZE, 1 CUP and 2 CUP buttons.
With commercial style spouts.
P. Group head
I. Storage tray (located behind drip tray)
For storage of accessories. Q. Dedicated hot water outlet
For making Americanos and
J. Removable drip tray grid pre-heating cups.
R. Extra-tall cup clearance
Rating Information S. 360° swivel steam wand
120 V ~ 60 Hz 1680 W Easily adjusts to the perfect position
for texturing milk.
7All parts of the Barista Pro™
that come into contact with coffee,
water and milk are BPA Free.
1
4
2 3
5
6 8
9
7
10
ACCESSORIES
1. Stainless steel milk jug 5. Cleaning disc
With MIN and MAX markings. 6. Cleaning tablets
2. Dual wall filter baskets (1 cup & 2 cup) 7. Cleaning brush
Use with pre-ground coffee.
8. The Razor™ precision dose trimming tool
3. Single wall filter baskets (1 cup & 2 cup)
Use when grinding fresh whole coffee beans. 9. Steam wand and filter basket cleaning tool
4. Water filter and filter holder 10. Descaling powder
8Barista Pro TM
Features
THERMOJET™ HEATING SYSTEM PID TEMPERATURE CONTROL
Innovative heating system achieves ideal Electronic PID temperature control
extraction temperature in 3 seconds. for increased temperature stability.
INTEGRATED CONICAL BURR INSTANT HOT WATER
GRINDER Dedicated hot water outlet for making
Precision conical burrs maximize Americanos and pre-heating cups.
ground coffee surface area for a full espresso
flavor. Upper and lower burrs are removable LOW PRESSURE PRE-INFUSION
for cleaning. Applies low water pressure at the start
of the extraction to gently expand grinds
ADJUSTABLE GRIND SIZE for an even extraction.
30 espresso grind settings from fine to coarse
for optimal extraction. VOLUMETRIC CONTROL
Pre-set 1 & 2 cup volumes, manual over-ride
ADJUSTABLE GRIND AMOUNT or programmable shot volumes.
Adjust the amount of fresh ground coffee
dosed into the filter basket to suit the fineness DRY PUCK FEATURE
or coarseness of the grind. Removes excess water from the ground coffee
in the filter basket after extraction for easy
AUTOMATIC DOSING disposal of the coffee puck.
The grinder will dispense the required
amount of ground coffee for a single or LARGE DRIP TRAY
double cup dose. With more usable workspace.
HANDS FREE GRINDING
Auto stop for hands free grinding directly into
the portafilter.
THE RAZOR™ DOSE TRIMMING TOOL
Patented twist blade trims down the puck
to the right level for precision dosing and a
consistent extraction.
ADJUSTABLE SHOT TEMPERATURE
CONTROL
For optimum coffee flavor.
9Assembly
BEFORE FIRST USE
Machine Preparation FILLING THE WATER TANK
Remove and discard all labels and packaging • Ensure the water filter is securely fitted
materials attached to your espresso machine. inside the water tank.
Ensure you have removed all parts and • Use the handle at the top of the water
accessories before discarding the packaging. tank to assist in lifting it up and away
Remove the packaging and the plastics from the machine.
bags containing the water filter and water
filter holder.
Clean the water tank, portafilter, filter baskets,
milk jug and drip tray using warm water and a
gentle dish washing liquid. Rinse well, then dry MAX
thoroughly before reassembling.
INSTALLING THE WATER FILTER
• Remove the water filter and water filter holder
from the plastic bag. MIN
• Soak the filter in cold water for 5 minutes.
• Wash the filter holder with cold water.
• Fill the water tank with cold potable tap
• Set the reminder for next month of water to below the MAX marking indicated
replacement. We recommend to replace the on the side of the water tank.
filter after 2 months.
• Replace the water tank back on the machine,
• Insert the filter into the filter holder. pressing down to ensure that it is properly
• Install the assembled filter holder in the water positioned and attached to the machine.
tank, ensuring it is clicked into place.
• Fill the water tank with cold water before
sliding back into position on the back of the
machine and locking into place.
• Refer to Care & Cleaning on page 18 for
further instruction on installing the filter.
MAX
MAX
NOTE
2 3
DO NOT use highly filtered, demineralized or 4 5
distilled water in this machine. This may affect
MIN
MIN
the taste of the coffee.
NOTE
NOTE
For replacement water filters, visit the Breville
webpage or contact Breville Consumer Support. Replace the water daily. The water tank should be
filled with fresh, cold tap water before each use.
10Assembly
ATTACHING THE HOPPER FIRST USE CYCLE
Insert the bean hopper into position on top A first use cycle must be completed before
of the machine. the initial use of the machine. The first use
cycle rinses the machine and primes the
heating system.
1. Fill the water tank.
2. Ensure machine is fully assembled with
the bean hopper, drip tray and water tank
securely attached to the machine.
3. Press the POWER button. The machine will
beep and go into FIRST CYCLE mode.
4. The LCD will display FLUSH and the 1 CUP
button will be illuminated.
FASTER
POUR GRIND LOCK PRE-INFUSE SHOT SHOT TEMP
HOPPER HOT HOTTER
GRIND DOUBLEWATER
SINGLE
SIZE FLUSH IN
AMOUNT DESCALE PROGRESS
FILL COOLER
RESET
SLOWER DEFAULTS TANK STEAM
POUR PAUSED SEC CUSTOM MANUALCUSTOM
IND AMOUNT
GR
Turn the dial to lock the hopper into place.
Fill with fresh coffee beans. MENU
EXIT FILTER SIZE
5. Press the 1 CUP button. The LCD will show
a count down for the remaining time of the
first use cycle.
6. Once complete, the machine will go
into READY mode.
11Functions
TURNING OFF THE MACHINE
Regardless of whether you use Single Wall
To turn the machine off, press the POWER or Dual Wall filters baskets, use the 1 CUP
button. Alternatively, the machine has basket when brewing a single cup and the
auto-off, if it is not used for 30 minutes. 2 CUP basket when brewing two cups or a
stronger single cup or mug.
FILTER BASKETS
You will need to adjust the grind amount and
This machine includes 4 filter baskets; size if switching from a single to a double
2 x Single Wall and 2 x Dual Wall. basket, or vice versa.
Single Wall filter baskets should be used when The provided filter baskets are designed for:
grinding fresh whole coffee beans. They allow 1 CUP basket = approx. 8-11g
you to experiment with grind, dose and tamp 2 CUP basket = approx. 16-19g
to create a more balanced espresso.
NOTE
You may need to experiment with how much
coffee is dosed into the filter basket or how
long the grinder needs to run to achieve
the correct dose. For example; when using
1 CUP 2 CUP a finer espresso grind with the Single Wall
filter baskets, you may need to increase the
Dual Wall filter baskets should be used when grind amount to ensure the filter basket is
using pre-ground coffee. They regulate the correctly dosed.
pressure and help to optimize the extraction
regardless of the grind, dose and tamp pressure
or freshness.
1 CUP 2 CUP
12THE GRIND DOSING THE COFFEE
When grinding coffee beans, the grind size • Fill the hopper with fresh coffee beans.
should be fine, but not too fine. The grind size • Insert the required filter basket into the
will affect the rate at which water flows through portafilter.
the ground coffee in the filter basket and the
• Place the portafilter into the grinding cradle.
taste of the espresso.
• If required, press the FILTER SIZE button to
If the grind is too fine (looks like powder
select the filter basket size; Single or Double.
and feels like flour when rubbed between
the fingers), the water will not flow through • If required, turn the GRIND AMOUNT
the coffee, even when under pressure. The dial to change the grind time; clockwise
resulting espresso will be OVER EXTRACTED, to increase the time and anti-clockwise
dark in color and bitter in flavor. to decrease.
If the grind is too coarse, the water will flow
NOTE
through the ground coffee in the filter basket
too quickly. The resulting espresso will The default grind times are 9.5 seconds for a
be UNDER EXTRACTED and lacking in 1 cup filter and 13 seconds for a 2 cup filter.
color and flavor.
• Press and release the portafilter to activate
the automatic dosing. The LCD will show the
SETTING THE GRIND SIZE
filter basket filling.
This machine has 30 grind settings to select
from, with the size selected displayed on the FASTER
POUR GRIND LOCK PRE-INFUSE SHOT SHOT TEMP
HOPPER HOT HOTTER
LCD screen. The default grind size is 15. GRIND DOUBLE
SINGLEWATER
SIZE FLUSH IN
When adjusting the grind size, a bar will AMOUNT DESCALE PROGRESS
COOLER
RESET FILL
display on the LCD indicating a faster or SLOWER DEFAULTS TANK STEAM
POUR PAUSED SEC CUSTOM MANUALCUSTOM
slower pour.
• If you need to pause the grinding function,
FASTER GRIND LOCK PRE-INFUSE SHOT SHOT TEMP
POUR
HOPPER HOT HOTTER press and release the portafilter. The LCD
DOUBLE WATER
GRIND
SIZE
SINGLE
FLUSH IN
will show PAUSED, it will remain paused for
AMOUNT DESCALE PROGRESS
FILL COOLER 15 seconds before returning to READY mode.
RESET
DEFAULTS TANK STEAM
SLOWER
POUR PAUSED SEC CUSTOM MANUALCUSTOM • Press and release the portafilter to
resume grinding.
Use the GRIND SIZE selector on the left side
of the machine to adjust the grind size. NOTE
COARSER It is normal for the portafilter to appear
overfilled with ground coffee.
MANUAL DOSING
To manually dose the coffee, press and hold
the portafilter in the grinding cradle until the
desired amount of ground coffee has been
dosed. To stop grinding, release the portafilter.
FINER The timer will count up, displaying
the grind time.
13TAMPING THE GROUND COFFEE • Rotate the Razor™ dose trimming tool back
• Remove the portafilter from the and forth while holding the portafilter on
grinding cradle. an angle over a knock box to trim off excess
coffee grinds. Your filter basket is now dosed
• Tap the portafilter several timers to with the correct amount of coffee.
collapse and distribute the coffee evenly
in the filter basket.
• Using the tamper, tamp down firmly (approx.
15-20kg of pressure). The amount of
pressure is not as important as the consistent
pressure every time.
• Wipe excess coffee from the rim of the filter
basket to ensure a proper seal is achieved in
the group head.
• As a guide, the top edge of the cap on PURGING THE GROUP HEAD
the tamper should be level with the top Before placing the portafilter into the group
of the filter basket AFTER the coffee has head, run a short flow of water through the
been tamped. group head by pressing the 1 CUP button.
This will stabilize the temperature prior to
NOTE extraction and preheat the portafilter for a
consistent shot temperature.
We recommend quality 100% Arabica beans
with a ‘Roasted On’ date stamped on the bags, INSERTING THE PORTAFILTER
not a ‘Best Before’ or ‘Use By’ date. Coffee
Place the portafilter underneath the group head
beans are best consumed between 5 – 20 days
so that the handle is aligned with the INSERT
after the ‘Roasted On’ date. Stale coffee may
position. Insert the portafilter into the group
pour too quickly from the portafilter and taste
head and rotate the handle towards the centre
bitter and watery.
until firm resistance is felt.
TRIMMING THE DOSE LOCK TIGHT
The Razor™ precision dose trimming tool
allows you to trim the puck to the right level
for a consistent extraction.
• Insert the Razor™ dose trimming tool into
the filter basket until the shoulders of the
tool rest on the rim of the basket. The blade
of the dose trimming tool should penetrate
the surface of the tamped coffee.
14EXTRACTING ESPRESSO
• As a guide the espresso will start to flow after 8–12 seconds (infusion time) and should be the
consistency of dripping honey.
• If the espresso starts to flow after less than 7 seconds, you have either under dosed the filter
basket and /or the grind is too coarse. This is an UNDER EXTRACTED shot.
• If the espresso starts to drip but doesn’t flow after 12 seconds, the grind is too fine. This is an
OVER EXTRACTED shot.
CORRECT EXTRACTION UNDER EXTRACTION OVER EXTRACTION
• Flow starts after 8-12 secs • Flow starts after 1-6 secs • Flow starts after 12 secs
• Flow slow like warm honey • Flow fast like water • Flow drips or not at all
• Crema is golden brown with a fine • Crema is thin and pale • Crema is dark and spotty
mousse texture • Espresso is pale brown • Espresso is very dark brown
• Espresso is dark brown • Tastes bitter/sharp, weak and watery • Tastes bitter and burnt
AFTER EXTRACTION SOLUTIONS SOLUTIONS
REMOVE USED
GRINDS GRIND GRIND
DOUBLE DOUBLE
Used grinds will form
a coffee 'puck'. If the
puck is wet, refer to SEC SEC
the 'Under Extraction'
INCREASE DECREASE
section.
GRIND AMOUNT GRIND AMOUNT
Adjust & re-test Adjust & re-test Adjust & re-test Adjust & re-test
RINSE FILTER Tamp using 15-20kgs Tamp using 15-20kgs
BASKET of pressure. The top of pressure. The top
Keep the filter basket edge of metal cap on the edge of metal cap on the
clean to prevent tamper should be level tamper should be level
LOCK TIGHT blockages. Without with the top of the filter with the top of the filter
ground coffee in the filter basket AFTER tamping. basket AFTER tamping.
basket, lock the ALWAYS TAMP TO LINE Trim the puck to the ALWAYS TAMP TO LINE Trim the puck to the
portafilter into the right level using the right level using the
machine and run hot Adjust & re-test Razor™ precision dose Adjust & re-test Razor™ precision dose
water through. trimming tool. trimming tool.
GRIND GRIND DOSE TAMP
OVER EXTRACTED Too fine
Too much
Too heavy
BITTER • ASTRINGENT Use razor to trim
8-11g (1 cup)
BALANCED Optimum
16-19g (2 cup)
15–20kg
UNDER EXTRACTED Too coarse
Too little
Too light
UNDERDEVELOPED • SOUR Increase dose & use razor to trim
15PRE-PROGRAMMED SHOT VOLUME – PROGRAMMING ESPRESSO SHOT
1 CUP • Press the MENU button to enter the
Press the 1 CUP button once, the button will main menu.
flash, indicating that it has been selected. The
LCD will display PRE-INFUSE and the shot
FASTER
POUR GRIND LOCK PRE-INFUSE SHOT SHOT TEMP
HOPPER HOT HOTTER
clock will start counting up. Once pre-infusion GRIND
SIZE
DOUBLE
SINGLEWATER
FLUSH IN
is complete, the shot will start extracting. AMOUNT DESCALE PROGRESS
COOLER
RESET FILL
A pre-set single espresso volume of approx. SLOWER DEFAULTS TANK STEAM
POUR PAUSED SEC CUSTOM MANUALCUSTOM
30ml will be extracted. The machine will
automatically stop once the pre-set volume • Use the GRIND AMOUNT dial to navigate
has been extracted. through the menu to the custom or
custom . To select, press the dial.
FASTER
POUR GRIND LOCK PRE-INFUSE SHOT SHOT TEMP
HOPPER HOT HOTTER • Press the desired CUP button to start the
GRIND DOUBLEWATER
SIZE
SINGLE
FLUSH IN default pre-infusion. To customize the
AMOUNT DESCALE PROGRESS
RESET FILL COOLER pre-infusion, press and hold the same
DEFAULTS TANK STEAM
SLOWER
POUR PAUSED SEC CUSTOM MANUALCUSTOM CUP button for the desired pre-infusion
time. Release the button to commence the
extraction.
PRE-PROGRAMMED SHOT VOLUME –
2 CUP • To stop the extraction at the desired level,
press the CUP button. The LCD and CUP
Press the 2 CUP button once, the button will button will stop flashing and the machine will
flash, indicating that it has been selected and beep to indicate that the custom setting has
the LCD will display PRE-INFUSE and the shot been remembered. The machine will then
clock will start counting up. Once pre-infusion return to READY mode. The custom setting
is complete, the shot will start extracting. A can now be activated by pressing the desired
pre-set double espresso volume of approx. CUP button selected.
60ml will be extracted. The machine will
automatically stop once the pre-set volume has ADJUSTING SHOT TEMPERATURE
been extracted.
• Press the MENU button to enter the
FASTER GRIND LOCK PRE-INFUSE SHOT SHOT TEMP main menu.
POUR
HOPPER HOT HOTTER
GRIND DOUBLE WATER
SINGLE
• Use the GRIND AMOUNT dial to navigate
SIZE
AMOUNT
FLUSH IN
DESCALE PROGRESS
the menu and press to select SHOT TEMP.
FILL COOLER
RESET
SLOWER DEFAULTS TANK STEAM
POUR PAUSED SEC CUSTOM MANUALCUSTOM FASTER
POUR GRIND LOCK PRE-INFUSE SHOT SHOT TEMP
HOPPER HOT HOTTER
GRIND DOUBLEWATER
SINGLE
SIZE FLUSH IN
MANUAL PRE-INFUSION & AMOUNT DESCALE PROGRESS
COOLER
FILL
EXTRACTION SLOWER
RESET
DEFAULTS TANK STEAM
POUR PAUSED SEC CUSTOM MANUALCUSTOM
Press and hold the 1 CUP or 2 CUP button
for the desired pre-infusion time. Release the • Use the GRIND AMOUNT dial to increase
button to commence the extraction. Press the or decrease the shot temperature as
flashing button to stop the extraction. displayed on the LCD.
• Press the dial to confirm the desired
FASTER GRIND LOCK PRE-INFUSE SHOT SHOT TEMP
POUR
HOPPER HOT HOTTER temperature. The machine will return
GRIND
SIZE
DOUBLE
SINGLEWATER to READY mode.
FLUSH IN
AMOUNT DESCALE PROGRESS
FILL COOLER
RESET
SLOWER DEFAULTS TANK STEAM
POUR PAUSED SEC CUSTOM MANUALCUSTOM
16RESETTING TO DEFAULTS • Turn the STEAM dial to the .
• Press the MENU button to enter the • Keep the steam wand tip just under
main menu. the surface of the milk until the milk is
• Use the GRIND AMOUNT dial to navigate spinning clockwise, producing a vortex
the menu and select RESET DEFAULTS. (whirlpool effect).
• The machine will beep. • With the milk spinning, slowly lower the jug.
• The GRIND AMOUNT, FILTER SIZE, SHOT This will bring the steam wand tip to the
TEMP, 1 CUP and 2 CUP SHOT settings will surface of the milk and start to introduce air
all return to the default settings. The machine into the milk.
will return to READY mode. • Gently break the surface of the milk with the
tip to get the milk spinning fast enough.
USING HOT WATER OUTLET • Keep the steam wand tip at or slightly
The hot water function can be used to pre-heat below the surface, continuing to maintain
cups or to add hot water manually. the vortex. Texture the milk until sufficient
To activate the hot water, turn the STEAM volume is obtained.
dial to . • Lift the jug to lower the tip beneath the
surface but keep the vortex spinning. The
FASTER
POUR GRIND LOCK PRE-INFUSE SHOT
HOPPER HOT
SHOT TEMP
HOTTER
milk is at the correct temperature (140-149°F
GRIND DOUBLE
SINGLEWATER / 60-65°C) when the jug is hot to touch.
SIZE FLUSH IN
AMOUNT DESCALE PROGRESS
FILL COOLER
RESET
SLOWER DEFAULTS TANK STEAM
POUR PAUSED SEC CUSTOM MANUALCUSTOM
• The LCD will show that HOT WATER has
been activated.
• To stop the hot water, turn the dial back to the
centre, vertical position.
• The hot water will stop after 60 seconds, but
the dial must be turned back manually to the • Once the desired temperature has been
standby position. achieved, turn the STEAM dial back to the
vertical position.
TEXTURING MILK • Remove the steam wand from the milk jug.
It is recommended to momentarily purge the • Wipe the steam wand with a clean, damp
steam wand prior to texturing milk. cloth. Then return to lowered position over
Position the steam wand over the drip tray the drip tray.
and turn the STEAM dial to the . The LCD
will display STEAM when activated. Turn CAUTION: BURN HAZARD
the STEAM dial back to a vertical position to
Pressurized steam can still be released, even
stop steaming.
after machine has been switched off.
Different brands and types of milk and milk
alternatives will texture differently. Children must always be supervised.
• Start with fresh cold milk. NOTE
• Fill the milk jug to between the MIN and
MAX markings. Ensure the STEAM dial is in the vertical
• Lift the steam wand and insert into the milk position before removing the steam wand from
jug with the steam wand tip 1-2cm below the the milk jug.
surface of the milk, close to the right-hand
side of the jug at a 3 o’clock position.
17STEAM WAND PURGING
NOTE
After texturing milk, it is recommended to
When the machine creates steam, a pumping purge the steam wand. With the steam wand
noise can be heard. This is normal operation. positioned over the drip tray and turn the
STEAM dial to the , and allow the machine
NOTE to purge. Turn the STEAM dial back to a
vertical position to stop steaming.
Use only the supplied stainless steel milk jug to
froth milk using this machine. The use of other
containers may lead to dangerous conditions.
ADJUSTING CONICAL BURRS
Some types of coffee may require a wider grind range to achieve an ideal extraction or brew.
A feature of your Barista Pro™ is the ability to extend this range with an adjustable upper burr. We
recommend making only one adjustment at a time.
1 2 3 4 5 6
PUSH
AIR TIGHT
CONTAINER
Unlock hopper Hold hopper over container & turn Align hopper Run grinder Remove hopper Remove upper
dial to release beans into container into position until empty burr
7 8 9 10 11 12 13
FINE
FINE
FINE COARS FINE COARS
E 6 E
5 7
COAR
COAR
4 8
SE
SE
Remove wire Move adjustable Align the number Insert wire Push upper burr Lock upper burr Align hopper
handle from both top burr, 1 number, with the handle handle from both firmly into into position
sides of the burr coarser or finer opening sides of the burr position
14 15
Lock hopper Check your
extraction
18Care & Cleaning
CAUTION:
To prevent damage to the appliance, do not use alkaline cleaning agents when cleaning, use a soft
cloth and mild detergent.
REPLACING THE WATER FILTER
NSTALL 1 2 3 4 5 6
WATER
FILTER MAX
water filter
2 months or MIN
0 tank refills
Soak for Rinse filter Assemble Set date + 2 months Install filter in tank Replace water tank
5 minutes
The water filter provided helps to prevent scale build up which over time can affect the
performance of your machine. Replacing the water filter every 2 months will reduce the need to
de-scale the machine.
If you live in a hard water area, we recommend changing the water filter more frequently.
• Remove the water filter from the plastic bag.
• Soak the filter in cold water for 5 minutes.
• Rinse the filter under cold running water.
• Set the reminder for the next month of replacement. We recommend replacing the filter
after 2 months.
• Insert the filter into the filter holder.
• Install the assembled filter holder in the water tank, ensuring it is locked into place.
• Fill the water tank with cold water before sliding back into position on the back of the machine
and locking into place.
NOTE
Replacement water filters can be purchased from the Breville website or by contacting Breville
Consumer Support.
19FLUSH CLEANING CYCLE 1. Empty the drip tray and reattach to the
The LCD will display a FLUSH alert when a machine. Remove the water tank from the
cleaning cycle is required. The cleaning cycle is machine and remove the filter from the
separate from descaling. water tank.
2. Fill the water tank to the DESCALE line
FASTER
POUR GRIND LOCK PRE-INFUSE SHOT
HOPPER HOT
SHOT TEMP
HOTTER
indicated and add the descaling agent
GRIND DOUBLE
SINGLEWATER to the water. Reattach the water tank to
SIZE
AMOUNT
FLUSH IN
DESCALE PROGRESS
the machine.
FILL COOLER
RESET
SLOWER DEFAULTS TANK STEAM 3. Press the MENU button to enter the main
POUR PAUSED SEC CUSTOM MANUALCUSTOM
menu. Use the GRIND AMOUNT dial to
IND AMOUN
1. Insert theGR cleaning
T
disc into the filter basket navigate the menu to DESCALE, then press
in the portafilter. to select. The 1 CUP button will illuminate.
2. Place a cleaning tablet on top of the 4. Press the 1 CUP button to start the
cleaning
MENU
EXIT disc.SIZE
FILTER descaling cycle. The descale cycle cleans in
3. Lock the portafilter into the group head. 3 stages; coffee, hot water and steam. After
each stage is complete, the machine will
4. Empty the drip tray and replace onto
the machine. beep . The STEAM DIAL must be manually
turned to the HOT WATER and STEAM
5. Fill the water tank to the MAX line then position when indicated on the LCD.
reattach to the machine.
6. Press the MENU button to enter the FASTER
POUR GRIND LOCK PRE-INFUSE SHOT SHOT TEMP
HOPPER HOT HOTTER
main menu. GRIND DOUBLEWATER
SINGLE
SIZE
7. Use the GRIND AMOUNT dial to navigate AMOUNT
FLUSH IN
DESCALE PROGRESS
FILL COOLER
the menu to FLUSH, then press to select. SLOWER
RESET
DEFAULTS TANK STEAM
The 1 CUP button will illuminate. POUR PAUSED SEC CUSTOM MANUALCUSTOM
8. Press the 1 CUP button to start the cleaning 5. Once the descale cycle is complete, the
cycle. The remaining time for the cleaning machine needs to complete a rinse cycle.
cycle will be displayed on the LCD. The 1 CUP button will illuminate. As with
9. Once the cleaning cycle is complete, the the descale cycle, the STEAM DIAL must
machine will beep and return to READY be manually turned to correct position
mode. If any of the cleaning tablet remains when indicated on the LCD.
in the cleaning disc, repeat the cycle.
6. Remove and empty the drip tray then
10. Empty and rinse the portafilter, cleaning replace onto the machine. Empty any
disc and drip tray. remaining descaling liquid from the water
DESCALING tank, then fill the water tank to the MAX
line and reattached to the machine.
7. Press the 1 CUP button to commence the
NOTE rinse cycle. The rinse cycle is also 3 stages.
Ensure that the water filter is removed from the The LCD will show which stage it is up to.
water tank before adding the descaling powder After each stage, the machine will beep.
when descaling the machine. 8. Once the rinse cycle is complete,
the machine will beep and return
After regular use, hard water can cause to READY mode.
mineral build up in and on many of the
9. Remove and rinse the drip tray and water
inner functioning components, reducing the
tank. Dry thoroughly before replacing them
brewing flow, brewing temperature, power of
on the machine.
the machine, and the taste of the espresso. The
LCD will display a DESCALE alert, when a
descaling cycle is required.
20CLEANING THE CONICAL BURR GRINDER
This grinder cleaning cycle removes oil build-up on the burrs which can impede performance.
1 2 3 4 5 6 7
PUSH
Unlock hopper Empty hopper Replace hopper Lock hopper Run grinder Unlock hopper Remove hopper
empty
8 9 10 11 12
IGN LOC
AL K
Unlock top burr Remove top burr Clean top burr Clean lower Clean chute
with brush burr with brush with brush
ADVANCED CLEANING FOR THE CONICAL BURR GRINDER
This step is only required if there is a blockage between the grinding burrs and the grinder outlet.
1 2 3 4 5 6 7
1
SPRING 2
WASHER
3
FLAT
WASHER
1. GRIND FAN
LOOSEN NUT 2. METAL WASHER
3. FELT WASHER
Remove hopper Set GRIND SIZE Use 10mm socket. Set GRIND SIZE Unlock & remove Remove nut, spring Remove grind fan
to 1 (finest) Rotate clockwise to to 30 (coarsest) top burr & flat washer. & washers
loosen the nut only Carefully remove using long-nose
lower burr pliers
8 9 10 11 12 13 14
3
SPRING
2 WASHER
1 FLAT
WASHER
1. FELT WASHER
2. METAL WASHER
3. GRIND FAN
TIGHTEN NUT
Unblock the grinds Clean chute Insert washers & Insert lower burr Rotate counter- Insert & lock top Set GRIND SIZE
exit chute using the with brush grind fan using (drive pin & clockwise to burr to 15. Replace &
brush or a pipe long-nose pliers cavity to align). tighten nut lock hopper
cleaner Insert flat washer
& spring washer
WARNING
Care should be taken as the grinder burrs are extremely sharp.
21CLEANING THE STEAM WAND CLEANING THE DRIP TRAY
• The steam wand should always be cleaned • The drip tray should be removed, emptied
after texturing milk. Wipe the steam wand and cleaned at regular intervals, particularly
with a damp cloth. when the drip tray full indicator is
• After use, it is recommended to purge the showing EMPTY ME!
steam wand for a couple of seconds, to clear • Remove the drip tray from the machine and
any remaining milk. With the steam wand separate the parts. The EMPTY ME! indicator
positioned down over the drip tray, turn the can also be removed from the drip tray by
STEAM dial to for a couple of seconds pulling upwards to release the side latches.
to allow the machine to create steam for a Wash all parts in warm soapy water with a
couple of seconds before turning it back to soft cloth. Rinse and dry thoroughly before
the vertical position. reassembling and attaching to the machine.
• If the steam tip hole becomes blocked, it • The storage tray (located behind the drip
will reduce frothing performance. Use the tray) can be removed and cleaned with a
provided steam wand cleaning tool to clear soft, damp cloth.
the opening.
• If the steam wand is still blocked, use the NOTE
spanner in the middle of the steam wand All parts should be cleaned by hand using
cleaning tool to unscrew the tip. Soak the tip warm water and a gentle dish washing liquid.
in hot water before using the cleaning tool Do not use abrasive cleansers, pads or cloths
to unblock again. Replace the tip back on the which can scratch the surface. Do not clean any
steam wand, using the tool. of the parts or accessories in the dishwasher.
CLEANING THE FILTER BASKETS WARNING
AND PORTAFILTER
• The filter baskets and portafilter should be Do not immerse the power cord, power plug
rinsed under hot water immediately after use or appliance in water or any other liquid.
to remove all residual coffee oils.
CLEANING THE OUTER HOUSING
• If any of the holes in the filter basket become
blocked, use the pin on the end of the Wipe the outer housing with a soft, damp
provided cleaning tool to unblock the holes. cloth and then polish with a soft, dry cloth.
• If the holes remain blocked, dissolve a STORING YOUR MACHINE
cleaning tablet in hot water and soak filter
basket and portafilter in solution for approx. Before storing, press the POWER button to
20 minutes. Rinse thoroughly. turn the machine off then remove the plug
from the power outlet. Remove unused beans
CLEANING THE GROUP HEAD from the hopper, clean the grinder (see
page 18), empty the water tank and the drip
• The group head interior and shower screen
tray. Ensure the machine is cool, clean and dry.
should be wiped with a damp cloth after use
Place accessories in the storage tray.
to remove any ground coffee particles.
Store the machine upright and do not store
• Periodically purge the machine. Place an
anything on top.
empty filter basket and portafilter into the
group head. Press the 1 CUP button and run ERROR MODE
a short flow of water to rinse out any residual
coffee. Press the 1 CUP button again to stop If your machine displays on the LCD,
the hot water. Remove the portafilter and contact Breville Consumer Support.
rinse thoroughly.
22Troubleshooting
PROBLEM POSSIBLE CAUSES EASY SOLUTION
Water does not flow Water tank is empty. Fill tank.
from the group head.
Water tank is not fully inserted and Push water tank down completely to
No hot water.
locked into position. lock into place.
Machine needs to be descaled. Perform descale cycle.
Coffee is ground too finely and/ See below, ‘Espresso only drips from the
or too much coffee in filter basket portafilter spouts or not at all’.
and/or over tamping and/or filter
basket is blocked.
Espresso only drips Coffee is ground too finely. Use slightly coarser grind.
from the portafilter Refer to ‘Setting the Grind Size’, page 13
spouts or not at all. and ‘Over Extraction’, page 15.
Too much coffee in the filter basket. Lower dose of coffee.
Refer to ‘Dosing’, page 13 and
‘Over Extraction’, page 15.
After tamping, trim the coffee dose
using the Razor™ dose trimming tool.
Coffee tamped too firmly. Tamp between or 15–20kg of pressure.
Water tank is empty. Fill tank.
Water tank is not fully inserted and Push water tank down completely to
locked into position. lock into place.
The filter basket may be blocked. Use the pin on the end of the provided
cleaning tool to unblock the hole(s).
If the hole(s) remain blocked, dissolve
a cleaning tablet in hot water and
soak filter basket and portafilter in
solution for approx. 20 minutes.
Rinse thoroughly.
Machine needs to be descaled. Perform descale cycle.
Water doesn't come Water tank is empty or water level Fill tank.
through (the machine is below MIN.
makes loud noise).
23PROBLEM POSSIBLE CAUSES EASY SOLUTION
Espresso runs out Coffee is ground too coarsely. Use slightly finer grind.
too quickly. Refer to ‘Setting the Grind Size’, page 13
and ‘Under Extraction’, page 15.
Not enough coffee in the Increase dose of coffee.
filter basket. Refer to ‘Dosing’, page 13 and ‘Under
Extraction’, page 15. Tamp then use the
Razor™ dose trimming tool to trim off
excess coffee.
Coffee tamped too lightly. Tamp between or 15–20kg of pressure.
Espresso runs out around Portafilter not inserted Ensure portafilter is completely inserted
the edge of the portafilter. in the group head correctly. and rotated until resistance is felt.
There are coffee grounds around Clean excess coffee from the rim of
the filter basket rim. the filter basket to ensure a proper seal
in group head.
Too much coffee in the filter basket. Lower dose of coffee.
Refer to ‘Dosing’, page 13.
After tamping, trim the coffee dose
using the Razor™ dose trimming tool.
No steam. Machine has not reached operating Allow time for the machine to reach
temperature. operating temperature.
Water tank is empty. Fill tank.
Water tank is not fully inserted and Push water tank down completely
locked into position. to lock into place.
Machine needs to be descaled. Perform descale cycle.
Steam wand is blocked. Refer to ‘Cleaning the Steam
Wand’, page 22.
Pulsing/pumping sound The machine is carrying out the No action required as this is the normal
while extracting espresso normal operation of the pump. operation of the machine.
or steaming milk.
Water tank is empty. Fill tank.
Water tank is not fully inserted and Push water tank down completely to
locked into position. lock into place.
24PROBLEM POSSIBLE CAUSES EASY SOLUTION
Coffee not hot enough. Cups not pre-heated. Rinse cups under hot water outlet.
Portafilter not pre-heated. Rinse portafilter under hot water outlet.
Dry thoroughly.
Milk not hot enough Texture milk for a longer period of time.
(if making a cappuccino
or latté etc).
Water temperature needs Increase the brew temperature refer to
to be adjusted. 'Adjusting Shot Temperature' page 16.
No crema. Coffee tamped too lightly. Tamp betweens or 15–20kg of pressure.
Coffee is ground too coarsely. Use slightly finer grind.
Refer to ‘Setting the Grind Size’, page 13
and ‘Under Extraction’, page 15.
Coffee beans or pre-ground coffee If grinding fresh whole coffee beans,
are not fresh. use freshly roasted coffee beans with
a ‘Roasted On’ date and consume
between 5–20 days after that date.
If using pre-ground coffee, use within
a week of grinding.
The filter basket may Use the pin on the end of the provided
be blocked. cleaning tool to unblock the hole(s).
If the hole(s) remain blocked, dissolve
a cleaning tablet in hot water and
soak filter basket and portafilter in
solution for approx. 20 minutes.
Rinse thoroughly.
Single Wall filter baskets are being Ensure you use Dual Wall filter baskets
used with pre-ground coffee. with pre-ground coffee.
Water leaking Water tank is not fully inserted and Push water tank down completely to
locked into position. lock into place.
25PROBLEM POSSIBLE CAUSES EASY SOLUTION
Machine is on but The safety thermal-cut out may Press the POWER button to switch the
ceases to operate. have activated due to the pump or machine off and unplug from the power
grinder overheating. outlet. Allow to cool for about
30–60 minutes.
If problem persists, call
Breville Support.
No ground coffee No coffee beans in hopper. Filler hopper with fresh coffee beans.
coming from grinder.
Blocked grinder chamber or chute. Clean and clear grinder chamber
and chute. Refer to ‘Advanced Cleaning
for the Conical Burr Grinder’, page 21.
Water / moisture in grinder Clean and clear grinder chamber and
chamber and chute. chute. Refer to ‘Advanced Cleaning
for the Conical Burr Grinder’, page
21. Ensure burrs are thoroughly dry
before re-assembling. It is possible to
use a hair dryer to blow air into the
grinder chamber.
Too much/too little Grind amount settings are incorrect Use the grind duration button to
ground coffee is for particular grind size. increase or decrease the grind
being delivered to amount. Refer to ‘Dosing’, page 13 and
the filter basket. ‘Extraction Guide’, page 15.
Too much/too little Grind amount and/or grind size Adjust the grind amount and/or grind
espresso is being settings and/or shot volumes size settings. Refer to ‘Setting the Grind
delivered to the cup. require adjustment. Size’, page 13, ‘Dosing’, page 12 and
‘Extraction Guide’, page 15.
Grinder is making Blockage or foreign object Remove hopper, check for debris
a loud noise. in grinder. or blockage. If necessary, clean and
clear grinder chamber and chute.
Refer to ‘Cleaning the Conical Burr
Grinder’, page 21.
26the Barista Pro™ FR-CA MANUEL D'INSTRUCTIONS
Table des IMPORTANTES
matières MESURES DE
SÉCURITÉ
2 Breville vous recommande
la sécurité avant tout LISEZ TOUTES LES
7 Composants INSTRUCTIONS AVANT
9 Caractéristiques USAGE ET CONSERVEZ-
10 Assemblage LES À TITRE DE
12 Fonctions RÉFÉRENCE
19 Entretien et nettoyage
23 Guide de démarrage
• Lisez attentivement
toutes les instructions
avant d'utiliser l'appareil
et conservez-les à titre
de référence.
• Ne touchez pas les
surfaces chaudes de
l'appareil. Utilisez les
BREVILLE VOUS poignées ou boutons,
tel que stipulé dans le
RECOMMANDE manuel d'instructions.
LA SÉCURITÉ • Pour vous protéger
AVANT TOUT contre le risque d'incendie,
Chez Breville, la sécurité d'électrocution ou de
occupe une place de choix. blessures, n'immergez
Nous concevons et fabriquons pas le cordon
des produits de consommation d'alimentation, la fiche ou
sans jamais perdre de vue la l'appareil lui-même dans
sécurité de notre précieuse l'eau ou tout autre liquide.
clientèle. De plus, nous • Une surveillance étroite
vous demandons d'être très
vigilant lorsque vous utilisez est requise lorsque
un appareil électrique et de l'appareil est utilisé par
respecter les mesurers de ou près des enfants.
sécurité qui suivent.
2• Si l'appareil doit être: d'incendie, d'électrocution
−laissé sans surveillance ou de blessures.
−nettoyé • Ne laissez pas le cordon
−déplacé d'alimentation pendre
d'une table ou d'un
−assemblé comptoir ou toucher des
−ou rangé surfaces chaudes.
Éteignez-le toujours en • Ne placez pas l'appareil
appuyant sur l'interrupteur sur le bord d'une table ou
et débranchez-le de la prise d'un comptoir. Assurez-
électrique. vous que la surface est
• Laissez toujours l'appareil de niveau, propre et
refroidir avant de le exempte d'eau ou de toute
nettoyer, le déplacer autre substance.
ou le ranger. • Ne placez pas l'appareil sur
• Il est recommandé de ou près d'un brûleur à gaz
vérifier régulièrement ou électrique.
l'appareil et le cordon Ne le placez pas dans un
d'alimentation. N'utilisez four chaud et ne le laissez
pas l'appareil si le cordon pas entrer en contact
ou la fiche d'alimentation avec celui-ci.
sont endommagés ou • Ne faites pas fonctionner
si l'appareil présente l'appareil s'il est dans
un problème de un espace clos ou dans
fonctionnement ou a une armoire.
été endommagé de • Cet appareil est
quelque façon. Cessez recommandé pour
immédiatement un usage domestique
l'usage et contactez seulement. Ne l'utilisez pas
l'équipe de soutien aux à d'autres fins que celles
consommateurs de Breville. prévues. Ne l'utilisez pas
• L'usage d'accessoires non à l'extérieur ou dans un
recommandés par Breville véhicule ou un bateau en
peut causer un risque mouvement. 3AVIS AUX CLIENTS • La puce ne recueille CONCERNANT LE aucune information STOCKAGE DE LA concernant les personnes MÉMOIRE qui utilisent le produit ou • Veuillez noter qu‘afin de la demeure dans laquelle mieux servir nos clients, il est utilisé. Si vous avez une mémoire interne des questions sur la puce a été intégrée à votre de stockage de mémoire, appareil. Cette mémoire veuillez nous contacter à se compose d‘une petite privacy@breville.com puce recueillant certaines informations au sujet de INSTRUCTIONS votre appareil, comme sa SPÉCIFIQUES POUR LA fréquence d‘utilisation BES878 et la façon dont il est • Il est recommandé de utilisé. Dans l‘éventualité brancher la machine à où votre appareil serait espresso dans un circuit retourné pour réparation, dédié, correctement les renseignements relié à la terre et séparé recueillis à partir de la des autres appareils puce nous permettront électriques. de le réparer rapidement • Évitez tout contact avec et efficacement. Les les pièces en mouvement. informations recueillies • Avant l'usage, assurez- constituent également vous que la trémie à une ressource précieuse grains ne contient aucun pour le développement objet étranger. de futurs appareils • Remplissez le réservoir électroménagers afin avec de l'eau froide de mieux répondre aux seulement. N'utilisez besoins de nos clients. aucun autre liquide. 4
N'utilisez pas d'eau Pour les instructions,
hautement filtrée, référez-vous à la section
déminéralisée ou distillée, 'Détartrage' en page 44.
car cela peut affecter le • Ne tentez pas d'ouvrir
goût du café et le mode ou de réparer la
de fonctionnement de la machine à espresso
machine à espresso. • Pour tout entretien
AVERTISSEMENT autre que le nettoyage,
Pour éviter tout risque contactez l'équipe
de blessure, n'ouvrez pas de soutien aux
la chambre d'infusion consommateurs de
(ne pas retirer le porte- Breville ou visitez
filtre) pendant le un centre de service
processus d'infusion. autorisé Breville.
• Assurez-vous que le porte- INSTRUCTIONS
filtre est fermement inséré SPÉCIFIQUES POUR LE
et sécurisé dans la tête FILTRE À EAU
d'infusion avant de débuter • La cartouche du filtre
l'extraction. Ne retirez doit être hors de portée
jamais le porte-filtre durant des enfants.
le processus d'extraction. • Rangez les cartouches
• Soyez prudent lors du du filtre dans un
détartrage, car de la vapeur endroit sec et dans leur
chaude sera libérée. Avant emballage original.
le détartrage, éteignez • Protégez les cartouches
la machine, laissez-la contre la chaleur et la
refroidir au moins 1 heure lumière directe.
et assurez-vous que le
• N'utilisez pas
plateau d'égouttage est
de cartouches
parfaitement inséré.
endommagées.
5• N'ouvrez pas les Si vous utilisez une
cartouches du filtre. rallonge: (1) la puissance
• Si vous vous absentez électrique indiquée sur
pour une période le cordon ou la rallonge
prolongée, videz le doit être au moins
réservoir d'eau et équivalente à la puissance
remplacez la cartouche. électrique de l’appareil;
(2) la rallonge ne doit pas
INSTRUCTIONS SUR LE pendre d’un comptoir ou
COURT CORDON
d’une table où de jeunes
Votre appareil Breville enfants pourraient s’y
est muni d’un cordon suspendre ou trébucher
d’alimentation court et très accidentellement; (3) la
sécuritaire qui prévient rallonge doit être munie
les blessures corporelles d’une fiche à 3 broches
ou dommages résultant reliée à la terre.
du fait de tirer, trébucher
ou s’enchevêtrer dans un FICHE BREVILLE
cordon plus long. ASSIST®
Les cordons d’alimentation Votre appareil est muni
détachables ou les d’une fiche exclusive
rallonges peuvent être Breville Assist® conçue
utilisés avec précaution. spécialement avec anneau
pour laisser passer un
doigt et faciliter un
débranchement sécuritaire.
USAGE DOMESTIQUE SEULEMENT
CONSERVEZ CES INSTRUCTIONS
6Composants
A
B
C L
D M
N
E
O
F
P
G
Q
H R
I S
J
K
A. Trémie à grains de 250 g (½ lb) J. Grille amovible du plateau d'égouttage
Avec système de verrouillage pour faciliter K. Plateau d'égouttage amovible
le retrait, le stockage et le transfert des Avec indicateur de trop-plein.
grains de café. L. Réservoir d'eau amovible de 2 L (68 oz)
B. Moulin à meules coniques intégré Avec filtres remplaçables pour réduire le
C. Sélecteur de TAILLE DE MOUTURE tartre et les impuretés.
30 réglages de mouture à espresso, de M. Sélecteur de vapeur
fin à grossier. Pour contrôler la vapeur et l'eau chaude.
D. INTERRUPTEUR N. ÉCRAN ACL
E. Bourroir intégré amovible de 54 mm Avec animations de la progression de
F. Sortie de mouture broyage et d'extraction.
G. Support de mouture O. Panneau de commande
H. Porte-filtre en acier inoxydable de 54 mm Avec MENU, QUANTITÉ DE GRAINS/
Avec becs verseurs de style commercial. FORMAT DE FILTRE et touches 1 TASSE
et 2 TASSES.
I. Tiroir de rangement (logé derrière le plateau
d'égouttage) Pour ranger les accessoires. P. Tête d'infusion
Q. Sortie dédiée à l'eau chaude
Pour café américano et
préchauffage des tasses.
Informations énergétiques R. Hauteur pour très grandes tasses
120 V ~ 60 Hz 1680 W S. Buse vapeur pivotant sur 360°
S'ajuste facilement à la position idéale pour
mousser le lait.
7Toutes les pièces de la Barista Pro™
entrant en contact avec le café, l'eau et
le lait sont sans BPA.
1
4
2 3
5
6 7
8
9
10
ACCESSOIRES
1. Pichet à lait en acier inoxydable 5. Disque de nettoyage
Avec marques MIN et MAX. 6. Pastilles de nettoyage
2. Paniers filtres à double paroi (1 tasse & 2 tasses) 7. Brosse de nettoyage
Utiliser avec du café prémoulu.
8. Outil de dosage de précision the Razor™
3. Paniers filtres à simple paroi (1 tasse & 2 tasses)
Utiliser pour moudre des grains de café frais. 9. Outil de nettoyage de la buse vapeur et du
panier filtre
4. Filtre à eau et support du filtre
10. Détartrant en poudre
8Caractéristiques
de la Barista Pro™
SYSTÈME DE CHAUFFAGE EAU CHAUDE INSTANTANÉE
THERMOJET™ Sortie dédiée à l'eau chaude pour préparer un
Le système de chauffage innovant atteint la americano et préchauffer les tasses.
température idéale d'extraction en 3 secondes.
PRÉINFUSION À BASSE PRESSION
MOULIN À MEULES CONIQUES Applique une basse pression d'eau en début
INTÉGRÉ d'extraction pour gonfler délicatement la
Meules coniques de précision en maximisent mouture et assurer une extraction uniforme.
la surface de mouture, assurant un espresso
savoureux. Les meules supérieure et inférieure CONTRÔLE VOLUMÉTRIQUE
amovibles facilitent le nettoyage. Volumes préréglés de 1 & 2 tasses,
commande manuelle ou volumes d'espresso
TAILLE DE MOUTURE RÉGLABLE programmables.
30 réglages de mouture allant de fin à grossier,
pour une extraction optimale. FONCTION DE RONDELLE SÈCHE
Élimine l'excès d'eau contenu dans la mouture
QUANTITÉ DE MOUTURE RÉGLABLE du panier filtre après l'extraction, facilitant le
Ajuste la quantité de café fraîchement moulu retrait de la rondelle de café.
dans le panier filtre en fonction de la taille
de la mouture. GRAND PLATEAU D'ÉGOUTTAGE
Avec espace de travail accru.
DOSAGE AUTOMATIQUE
Le moulin distribue la quantité de café moulu
requise pour une dose simple ou double.
BROYAGE MAINS LIBRES
Arrêt automatique pour un broyage mains
libres directement dans le porte-filtre.
OUTIL DE DOSAGE THE RAZOR™
La lame torsadée brevetée égalise la rondelle
de café au bon niveau, pour un dosage précis et
une extraction homogène constante.
CONTRÔLE DE TEMPÉRATURE
RÉGLABLE
Pour une saveur optimale.
RÉGULATEUR THERMIQUE PID
Régulateur thermique électronique PID, pour
une stabilité thermique accrue.
9Assemblage
AVANT LA PREMIÈRE UTILISATION REMPLIR LE RÉSERVOIR D'EAU
Préparer la machine • Assurez-vous que le filtre à eau est bien fixé
dans le réservoir.
Retirez et jetez tout le matériel d'emballage
et toutes les étiquettes de votre machine à • Utilisez la poignée sur le dessus de réservoir
espresso. Assurez-vous d'avoir retiré toutes d'eau pour le soulever et le déplacer.
les pièces et tous les accessoires avant de
jeter l'emballage. Retirez l'emballage et les
sacs de plastique contenant le filtre à eau et
son support.
Nettoyez le réservoir d'eau, le porte-filtre, les MAX
paniers filtres, le pichet à lait et le plateau
d'égouttage à l'eau chaude avec un détergent à
vaisselle doux. Rincez et séchez à fond avant de
réassembler l'appareil.
INSTALLER LE FILTRE À EAU
MIN
• Retirez le filtre à eau et son support du sac
de plastique.
• Remplissez le réservoir avec de l'eau froide du
• Faites tremper le filtre dans l'eau froide
robinet jusqu'à la ligne MAX indiquée sur le
durant 5 minutes.
côté du réservoir.
• Lavez le support du filtre à l'eau froide.
• Fixez le rappel de remplacement au prochain • Replacez le réservoir dans la machine en le
mois. Nous recommandons de remplacer le poussant vers le bas pour vous assurer qu'il
filtre après 2 mois. est bien en place et correctement assemblé.
• Insérez le filtre dans le support du filtre.
• Installez le support du filtre (assemblé) dans
le réservoir d'eau, en vous assurant qu'il est
bien enclenché.
• Remplissez le réservoir d'eau froide avant de
MAX
le glisser en place à l'arrière de la machine et MAX
le verrouiller.
• Pour plus d'informations sur la façon
d'installer le filtre, consultez la section
2 3
«Entretien et nettoyage» en page 43.
MIN
4 5
MIN
NOTE
N'UTILISEZ PAS d'eau hautement filtrée,
déminéralisée ou distillée avec cette machine, NOTE
car cela pourrait affecter le goût du café.
Remplacez l'eau tous les jours. Le réservoir
NOTE d'eau doit être rempli avec de l'eau fraîche et
Pour remplacer les filtres à eau, visitez la
page web de Breville ou contactez l'équipe de
soutien aux consommateurs de Breville.
Rinse filter and Assemble Set date + 2 months Install filter in
mesh
10You can also read
