Landscape Drip Application Guide - A Practical Guide for Designing and Installing Drip Irrigation Systems - Rain Bird
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
Landscape Drip Application Guide
A Practical Guide for Designing and Installing Drip Irrigation Systems
The Intelligent Use of Water™
Product Guide
The Efficiency of Drip, Engineered by Rain Bird® Benefits of Xerigation®
The Rain Bird’s low volume irrigation products were coined with the phrase
“Xerigation” in the 1990’s and include drip irrigation and low volume spray
products. The Rain Bird Xerigation system is the most efficient way to water Design flexibility
landscapes.
Elimination of overspray
and runoff
Over the last fifteen years, Rain Bird has been a leader in innovation advances
that customers value. Earlier advances included the Xeri-PopTM, the first efficient High water efficiency
low volume spray with a spray head that retracts out of sight, the self-cleaning
back flush filter that reduces maintenance by automatically flushing out debris, Water is delivered at or near
and the PR Series Pressure Regulating Filter that combined the regulator and the plant root zone
filter into one component reducing the potential for leaks.
Plants stay healthier and
Today, Rain Bird continues the tradition of innovation with the SQ Series Nozzle live longer
and the XF Series Dripline featured below. With the broadest product line,
Rain Bird’s Xerigation systems can be designed to meet any site requirement
providing unmatched quality, efficient water use, and ease of installation.
It is Rain Bird’s long-standing
commitment to engineering and
Featured Rain Bird® Drip Products
quality excellence that sets our
SQ Series Nozzle
For irrigating small areas with dense plantings, the SQ drip irrigation products apart.
Series Nozzle is the most precise and efficient nozzle
available. With built-in pressure compensation and a
unique square spraying pattern, the need for
overlapping is greatly reduced. This means less
overspray, overwatering, and runoff than traditional
nozzles. It also means you need less nozzles,
dramatically reducing your costs and installation time. Demonstrated Water Savings
XF Series Dripline (XFD/XFCV/XFS)
Inland Empire Utilities Agency
The XF Series Dripline is the most flexible, pressure-
(IEUA) Building - Chino, CA
compensating inline emitter tubing available. Its
unique material offers significantly greater flexibility, Solution: Rain Bird developed a
allowing tighter turns with fewer elbows for easier comprehensible irrigation system for
installation. The dual-layered tubing (brown over the IEUA site, including Xerigation
black) provides unmatched resistance to chemicals,
products.
UV damage and algae growth.
Results: 73% less water used than a
comparable facility. First public agency
Control Zone Kits
building to ahieve a LEED Platinum
Control your zones with preassembled, compact
Rating.
Rain Bird Control Zone Kits. Two components (valve
and pressure regulating filter) are combined to
create a shorter kit, when compared with the
competition. This allows you to fit more control zone
kits in a single valve box without cramping the work
space inside the box, saving you time and money.
www.rainbird.com
Product Guide
Table of Contents
Product Guide
Anatomy of Xerigation .......................................2
Emission Devices ..................................................4
Control Zone Kits ............................................... 15
Application Guide
Narrow Planting Beds ...................................... 16
Parking Lot ........................................................... 26
Parkways and Walkways ................................. 32
Pots/Baskets/Misc. ............................................ 34
Slopes .................................................................... 42
Street Medians ................................................... 48
Walls ....................................................................... 56
Golf Courses ........................................................ 58
Trees ....................................................................... 64
Xeri-Bird 8
www.rainbird.com 1
Product Guide
Anatomy of Xerigation®/ Landscape Drip System Overview
Broadest Product Line in the Industry
With over 150 products, Rain Bird has the products needed for your application. Systems can be designed to meet any site requirements
and offer many exclusive Rain Bird advances including:
• Flexible XF Series dripline with advanced polymers that provide kink- resistance and reduced coil memory for easier installation
• Compact Control Zones with matched pressure regulator and filter to reduce parts, eliminate potential leak problems, and allow
for fitting more Control Zones in a valve box
• Precision low volume SQ spray nozzles that offer a square wetting pattern and adjust to either 2.5' or 4' throw distances
• Point-source emitters that provide pressure compensation with a wide selection of flow rates and three inlet options (Barb, 1032
threaded, and ½" FPT)
• XFS dripline with Copper Shield Technology™ for use in sub-surface applications under turf or shrub and groundcover areas. The
copper chip effectively protects the emitter from root intrusion
1
Control Zone Kit
“PGA Valve” and “Pressure QF Dripline QF Dripline 45
Regulating Basket Filter” Header Header
45 XF Series Dripline (XFD / XFS / XFCV)
PVC
Xeri-Bug
Xeri-Bug Emitter 6 Operation 46
Emitter XQ ¼"
8
Indicator
6
Distribution Easy Fit Elbow 11
Tubing
1/4” 1/4”
Tubing 9 Tubing XF Series Blank Tubing 33
1
Control Zone Kit Stake ¼" Stake 7
7 Barb XF Series Blank Tubing 33
Easy Fit Tee
Coupling 3 Easy Fit Tee
RWS (Root
Tubing Cutter 24 Watering
Low Pressure Easy Fit XF Series Blank Tubing 5 System) 43
Flow Regulating Female 2
Valve Filter Adapter Tie-Down Purple
44 Stake XF
XF Insertion Tool Xeriman Tool 4 10 Dripline Xeri-Bug Emitter
31
- ½" FPT
SEB-7X 16
Emitter
Valve Easy Fit
Box
6 Female 2
Xeri-Bug Emitter Adapter
XFF Coupling 40
Air Relief XFS Sub-Surface XFD Dripline 23 XFCV Dripline Easy
Valve Kit Dripline with with Heavy-Duty Fit 29
Copper Shield Check Valve 42 Tee
Technology 37
2 www.rainbird.com
Product Guide
ANATOMY
Targeted Watering with Xerigation® / Landscape Drip
Rain Bird Xerigation/Landscape Drip products are made especially for low-volume irrigation systems. By delivering water at or near the
PRODUCTS
plants’ root zones, Rain Bird Xerigation products offer targeted watering with the following advantages:
• Water conservation • Reduced liability (e.g. no overspray, no runoff)
• Greater efficiency (target each plant) • Minimization of weed growth
NARROW BEDS
• Design flexibility; simple construction and easily expandable • Cost savings
• Healthier plants
PARKING LOT
PARKWAYS/
WALKWAYS
SQ Series
PC Emitter Diffuser Cap 13 Square Nozzle ¼" Landscape Dripline 36
PC Module -1032 14
Diffuser
POTS/BASKETS
15 Xeri-Bubbler SPYK 9 Bug 12
PolyFlex 20 Cap
¼" Barb Tee
Riser
Assembly 1/4” 7
XQ ¼" Xeri-Pop 19 XQ ¼" Tubing 30
Distribution Distribution Stake Easy
2 8
Tubing XQ ¼" 8 Tubing
Easy Fit Distribution Fit
Female 3 Easy Fit Flush
¼" Self-Piercing 8 Tubing ¼" Barb
SLOPES
Adapter 17
Barb Connector Connector Coupling Cap
Easy Fit Tee ¼" Barb Connector XF Series Blank Xeri-Bug
Tubing 33 Emitter 6 32
STREET MEDIANS
29
Xeri-Bug
¼" Landscape SQ Series Emitter
9
Dripline 36 Square - 1032
¼" Barb Tee Nozzle 18
Xeri-Bird 8 25
XQ ¼"
Diffuser Multi-Outlet SQ
XQ ¼" Distribution
Bug Distribution
Tubing 8 Emission Device Xeri-Bug Tubing 8 Series
Cap 12 Nozzle
½” FPT x Barb Grey Emitter 6 Adapter
WALLS
Transfer Fitting 39 28
RETRO-1800 6 Outlet 27
Spray-to-Drip Inline Manifold
Retrofit Kit Diffuser Pressure 26
Bug
38 12
Cap Regulator PolyFlex
Riser
GOLF COURSES
1/4” XQ ¼" 1/4”
PCT Distribution Assembly
Bubbler Tubing Tubing
8 Tubing
15
41 7 Stake 7 Stake
Multi-Outlet
Xeri-Bug 35
TREES
* NOTE: Not all products listed in the Product Guide section are in the diagram above
D40685
www.rainbird.com 3
7 7 34 17
8 8 11
Product Guide
29
9 33
Xeri-Bug™ Emitters
Barb Inlet x Barb Outlet
5 10 29
Point-source low-flow emitters for
watering the root zones of plants, 12
25
trees, and container plants.
31 XB-05-PC 12 XB-10-PC XB-20-PC
(0.5 GPH) (1.0 GPH) (2.0 GPH)
Anatomy of a Xerigation® / Landscape Drip System
7
7
26
16 8
4 35
13
18
36
12
Installation Option 1 14 19
Installation Option 2 12
66 20 8
Using a Xeriman Tool, insert 2an emitter 8 For more precise water placement, use
8
15 7 ¼” distribution tubing,8 a ¼” tubing
7
directly into drip tubing or between
6 6
dripline emitters as needed. stake,9and a bug cap.
23 29 PVC
2 8
7 6 17
7 8 8 11 34 34 6 3
1
lack Stripe Tubing 11. Easy Fit Elbow 17. ⁄4” Self-Piercing Barb 22. SEB-7X Emitter Valve Box 28. XPCN Se
ug Emitter 12. Diffuser Bug Cap Connector
29
23. XF Dripline
33
29.
30
Easy Fit T
bing Stake
9
13.
33
PC Emitter Diffuser Cap 18. XPCN Series Nozzle 24. Tubing Cutter 30. Easy Fit F
3
tribution Tubing 14. PC Module-1032 19. Xeri-Pop 25. Xeri-Bird 8 31. Purple L
rb Tee 5
15.
10 PolyFlex
29 Riser Assembly 20. Xeri-Bubbler SPYK 26. Inline Pressure Regulator 32. Xeri-Bug
32
18
6
own Stake 16. Xeri-Bug Emitter - ⁄2” FPT Option 3 21.
Installation
1 Air Relief Valve
12
12 Kit 25
27.
25
6 Outlet
6 Installation
Manifold Option 4 33.
28
XT-700 D
For precise
31 water placement,
12 a barbed The Xeri-Bird 8 provides a centralized
8
7 connector can be punched into 77 location for up to eight emitters. A mix
88 11
www.rainbird.com/drip
7 27
7
distribution tubing. The emitter is then 26
26 of Xeri-Bug and/ or PC emitters can be
placed at the end of the16¼” distribution 88 used to provide the flow rates needed
35 15 15
4
tubing. NOTE: should the emitter for different plant materials. Tentacles
9 become dislodged, unregulated flow of ¼” distribution tubing, ¼” tubing
6
will occur.2 stakes, and bug caps allow for precise
water placement.
23 17
5 29 PVC
Xeri-Black Stripe Tubing 11. Easy Fit Elbow 17. 1⁄4” Self-Piercing Barb 22. SEB-7X Emitter Valve Box 28. XPCN Series Nozzle Adapter 34. 1⁄4” Barb Connector
Xeri-Bug Emitter 12. Diffuser Bug Cap Connector 23. XF Dripline 29. Easy Fit Tee 35. Multi-Outlet Xeri-Bug
1
⁄4” Tubing Stake 13. PC Emitter Diffuser Cap 18. XPCN Series Nozzle 24. Tubing Cutter 30. Easy Fit Flush Cap 36. 1⁄4” Landscape Dripline
1
⁄4” Distribution Tubing 14. PC Module-1032 19. Xeri-Pop 25. Xeri-Bird 8 31. Purple Landscape Dripline
20. Xeri-Bubbler SPYK
PolyFlex Riser Assembly Installation Option 5 32. Xeri-Bug Emitter - 1032
1
⁄4” Barb Tee 15. 26. Inline Pressure Regulator
21. Air Relief Valve Kit 27. 6 Outlet Manifold
Tie-Down Stake 16.
8
Xeri-Bug Emitter - 1⁄2” FPT
Drip Tip 33. XT-700 Distribution Tubing
8 The 6 Outlet Manifold provides a
66
27
27 centralized water distribution When using an emitter at the end of the 1⁄4” distribution
77 www.rainbird.com/drip
connection for up to six emission tubing, should the emitter become dislodged (or the
1⁄4” tubing gets cut) unregulated flow will occur.
devices. Connect the ¼” distribution
tubing to one of the outlets. Use a ¼”
tubing stake to ensure precise water
placement. The emitter is placed on
the end of the 1/4” distribution tubing
to regulate the water flow. NOTE:
should the emitter become dislodged,
unregulated flow will occur.
4 www.rainbird.com
Product Guide
ANATOMY
Xeri-Bug™ Emitters
10-32 Thread
Anatomy
12
Inlet
of axXerigation
Barb Outlet
® / Landscape Drip System
Point-source low-flow emitters for
PRODUCTS
13
8
watering
7
the root zones of plants, 18
36
trees, and container plants. 20
14
8
19
12
8
15
8 7
6 6
XB-05PC-1032 XB-10PC-1032
9 XB-20PC-1032
3 (0.5 2GPH) 8
(1.0 GPH) (2.0 GPH)
NARROW BEDS
7 7 34 17
8 8 11 34 6 3
1 33 30
33 30
29
1a 1b 9 33
3
2
32
32
5
Installation Option 1
10 29
Installation Option 2 18
32
18 12
12
25
25
6
28
PARKING LOT
28
Use a 10-32 threaded 31 emitter 12with a The 8Xeri-Bird 8 provides a centralized
erigation® / Landscape Drip System
PolyFlex Riser for point-source 7 77 7 location 27for up to eight emitters. A mix
26
88
26
applications in high foot traffic areas. 16 of Xeri-Bug and/ or15PC emitters
15
can be
24 35
27 4
22
(A pedestrian walking through a flower used to provide the flow rates needed
for different plant materials. Tentacles
15 15
15 bed
6 could pull up a staked emitter or
2
of ¼” distribution tubing, ¼” tubing
otherwise 13 cause misalignment of the
stakes, and bug caps allow for precise
PARKWAYS/
WALKWAYS
PVC
23 29
¼” distribution tubing. If they stepped 18
36 water placement.
one Kit 5. Xeri-Black Stripe Tubing on a PolyFlex
11. Easy Fit Elbow Riser, the 17.
emitter would
⁄ ” Self-Piercing 1
Barb 4 22. SEB-7X Emitter Valve Box 28. XPCN Series Nozzle Adapter 34. 1⁄4” Barb Connector
Connector 12
Flow Valve 6. Xeri-Bug Emitter
1
stay in place.)
12. Diffuser
14 Bug Cap
18. XPCN Series Nozzle
19 23. XF Dripline 29. Easy Fit Tee 35. Multi-Outlet Xeri-Bug
sure Regulating Filter 7. ⁄4” Tubing Stake 13. PC Emitter Diffuser Cap 24. Tubing Cutter 30. Easy Fit Flush Cap 36. 1⁄4” Landscape Dripline
emale Adapter20 8. 1
⁄4” Distribution Tubing 14. PC Module-1032 19. Xeri-Pop 8 25. Xeri-Bird 8 31. Purple Landscape Dripline
oupling 9. 1
⁄4” Barb8Tee 15. PolyFlex Riser Assembly 20. Xeri-Bubbler SPYK 26. Inline Pressure Regulator 32. Xeri-Bug Emitter - 1032
Tool 10. Tie-Down Stake 16. 15 Emitter - 1⁄2” FPT
Xeri-Bug 21. Air Relief Valve Kit 27. 6 Outlet Manifold 33. XT-700 Distribution Tubing
8 7
POTS/BASKETS
34. 1⁄4” Barb Connector
9
35. Multi-Outlet Xeri-Bug
www.rainbird.com/drip
36. 1⁄4” Landscape Dripline
Anatomy of a Xerigation / Landscape Drip System
Xeri-Bug™ Emitters 2 ® 8
17
½” FPT Inlet x Barb Outlet
34 34 6 3
13
18
36
Point-source low-flow emitters for 33 30 12
29 14 19
watering the root zones of plants,
SLOPES
20 8
33
trees, and container plants. 8
15
8 7
6 6
9
2 8
32
STREET MEDIANS
Water Source 7 8 8
7
11 34 17
18 34 6 3
1
XBT-10
25 XBT-20 28
12 6
(1.0 GPH) 29 (2.0 GPH) 33
1a 1b 9 33
31 12
3 8
7 27
7 7
5 29
2 10 26 18
8 28
16
16 25
Installation Option
35 1 12
12
Installation Option
15 6
2 15
WALLS
31 12 8 8
Use the ½” FPT inlet emitter connected For more
7 precise water placement, use 27
7 7
to a PVC schedule 80 riser to regulate 7 ¼” distribution tubing, 26a ¼” tubing
2 16 16 8
24 flow to plant4 material. stake,
35 and a bug cap. 15
22
GOLF COURSES
29 21 PVC
6
2
23 29 PVC
17. 1⁄4” Self-Piercing Barb 22. SEB-7X Emitter Valve Box 28. XPCN Series Nozzle Adapter 34. 1⁄4” Barb Connector
Connector 23. XF Dripline 29.17. Easy Fit Tee
1. Control Zone Kit 5. Xeri-Black Stripe Tubing 11. Easy Fit Elbow 1
⁄4” Self-Piercing Barb 22. SEB-7X Emitter 35.
Valve Multi-Outlet
Box 28.Xeri-Bug
XPCN Series Nozzle Adapter 34. 1⁄4” Barb Connector
ap 1a. Low Flow18.Valve
XPCN Series Nozzle
6. Xeri-Bug Emitter 24. Tubing Cutter
12. Diffuser Bug Cap 30. Easy Fit Flush Cap
Connector 23. XF Dripline 36. 1⁄4” Landscape Dripline
29. Easy Fit Tee 35. Multi-Outlet Xeri-Bug
1b. Pressure19. Xeri-Pop
Regulating Filter 7. 1⁄4” Tubing Stake 25. Xeri-Bird13.8 PC Emitter Diffuser Cap
18. XPCN Series Nozzle
31.19. Purple Landscape 24. Tubing Cutter
Dripline 30. Easy Fit Flush Cap 36. 1⁄4” Landscape Dripline
2. Easy Fit Female Adapter 8. 1⁄4” Distribution Tubing 14. PC Module-1032 Xeri-Pop 25. Xeri-Bird 8 31. Purple Landscape Dripline
bly 3. 20. Xeri-Bubbler SPYK 26. Inline Pressure Regulator 32.20. Xeri-Bug
Xeri-BubblerEmitter - 1032 26. Inline Pressure Regulator
TREES
Easy Fit Coupling 9. 1⁄4” Barb Tee 15. PolyFlex Riser Assembly SPYK 32. Xeri-Bug Emitter - 1032
FPT 4. Xeriman Tool21. Air Relief Valve Kit
10. Tie-Down Stake 27. 6 Outlet16.
Manifold
Xeri-Bug Emitter - 1⁄2” FPT 33.21. XT-700 Distribution
Air Relief Valve Kit Tubing27. 6 Outlet Manifold 33. XT-700 Distribution Tubing
www.rainbird.com/drip
www.rainbird.com/drip
D49002
www.rainbird.com 5
Product Guide
Multi-Outlet Xeri-Bug™
Barb Inlet x Barb Outlet
Six outlet emitter with built-in
pressure compensation. Use for
watering the root zones of plants,
trees, and container plants.
XB-05-6 XB-10-6 XB-20-6
(0.5 GPH) (1.0 GPH) (2.0 GPH)
12
Installation Option 1
The Multi-Outlet Xeri-Bug provides
centralized water distribution for up to
7
six plants. All six outlets have the same
flow rate. Connect the ¼” distribution
tubing to one of the outlets. Use a ¼”
** tubing stake to ensure precise water
placement. Insert a bug cap at the end
ion® / Landscape Drip System of the tubing.
13
18
36
Multi-Outlet Xeri-Bug™
14 19
12
1/2" FPT inlet x Barb Outlet
8
8
15
8 7
Six outlet emitter with built-in 9
pressure compensation.
2 Use for 8
34
watering the root zones of17 plants, 34 6 3
trees, and container plants.
33 30
29
XBT-05-6 XBT-10-6 XBT-20-6
(0.5 GPH) (1.0 GPH) (2.0 GPH)
32
18
25 12 28
12
Installation Option6 1 Installation Option 2
8
12
12 The Multi-Outlet Xeri-Bug can be 7 Using an Easy Fit Tee and Male Adapter,
8 8
7 mounted on a ½” schedule 80 riser to 27 35 the Multi-Outlet Xeri-Bug can be
77 7
connect to PVC. It provides
26 centralized attached to drip tubing. It provides
16 8 centralized water distribution for up to
35
35 water distribution for up to six plants. 15 15
All six outlets have the same flow rate. six plants. All six outlets have the same
* flow rate. Connect the ¼" distribution
Connect the ¼" distribution tubing to
6 29
one of the outlets. Use a ¼” tubing tubing to one of the outlets. Use a ¼”
stake to ensure precise water tubing stake to ensure precise water
33 placement. Insert a bug cap at the end
placement.
PVC Insert a bug cap at the
end of the tubing. of the tubing.
7. 1⁄4” Self-Piercing Barb 22. SEB-7X Emitter Valve Box 28. XPCN Series Nozzle Adapter 34. 1⁄4” Barb Connector
Connector 23. XF Dripline 29. Easy Fit Tee 35. Multi-Outlet Xeri-Bug
8. XPCN Series Nozzle 24. Tubing Cutter 30. Easy Fit Flush Cap 36. 1⁄4” Landscape Dripline
9. Xeri-Pop 25. Xeri-Bird 8 31. Purple Landscape Dripline
0. Xeri-Bubbler SPYK 26. Inline Pressure Regulator 32. Xeri-Bug Emitter - 1032
1. Air Relief Valve Kit 27. 6 Outlet Manifold 33. XT-700 Distribution Tubing
6 www.rainbird.com
Product Guide
ANATOMY
6 Outlet Manifold – EMT-6XERI
½” FPT Inlet
Six outlet manifold without pressure
PRODUCTS
compensation. For use with Xeri-Bug or
PC Module emitters, Xeri-Pops, bubblers,
and micro-sprays.
NARROW BEDS
EMT-6XERI
6 18
Installation Option 1 Installation Option 2
8
PARKING LOT
27 19
The 6 Outlet Manifold provides a 27 To incorporate spray heads into your
7 centralized water distribution drip system, connect the Xeri-Pop
connection for up to six emission Micro-Spray to a multi-outlet manifold
devices. Connect ¼" distribution (EMT-6Xeri) via ¼” distribution tubing.
tubing to one of the outlets. Use a ¼” 8
tubing stake to ensure precise water
PARKWAYS/
WALKWAYS
placement. The emitter is placed on
the end of the ¼" distribution tubing to
regulate the water flow.
8
Installation Option 3 Drip Tip
POTS/BASKETS
27
20 Be concious of your run times and application rates.
To incorporate bubblers or micro- Mixing products connected to the EMT-6Xeri can lead
sprays into your drip system, connect to over or under watering.
dscape Drip System the needed product to a multi-outlet
manifold (EMT-6Xeri) via ¼”
distribution tubing.
SLOPES
13
18
36
12
14 19
Xeri-Bird™ 8 Multi-Outlet Emission Device
8
STREET MEDIANS
15
8 7
½” FPT Inlet x Barb Outlet 9
2
The most flexible multi-outlet
8
device.
Contains eight ports that accept
17
34 6 3
Xeri-Bug emitters or PC Modules for
33
29 independent flows from 0.5 to 24gph. 30
XBD-80
WALLS
32
18
12 25
25 Installation Option 1 28
GOLF COURSES
12 6
The Xeri-Bird 8 provides a centralized
8
77 location for up to eight emitters. A mix
7 27
of Xeri-Bug emitters and/ or PC
26
26
88 Modules can be used to provide the 15 15
35
flow rates needed for different plant
materials. Tentacles of ¼" distribution
tubing, ¼” tubing stakes, and bug caps
TREES
allow for precise water placement.
PVC NOTE: Always install the emitters with
the pointed or threaded end UP.
22. SEB-7X Emitter Valve Box 28. XPCN Series Nozzle Adapter 34. 1⁄4” Barb Connector
www.rainbird.com
23. XF Dripline 29. Easy Fit Tee 35. Multi-Outlet Xeri-Bug 7
24. Tubing Cutter 30. Easy Fit Flush Cap 36. 1⁄4” Landscape Dripline
Product Guide
Pressure-Compensating Modules
Barb Inlet x Barb Outlet
Point-source medium-flow
modules for watering larger PC-05 PC-07 PC-10
shrubs and trees. (5 GPH) (7 GPH) (10 GPH)
Anatomy of a Xerigation® / Landscape Drip System PC-12 PC-18 PC-24
(12 GPH) (18 GPH) (24 GPH)
ation / Landscape Drip System
13
® 18
21
36
12
7
14 19
12
Installation 8Option 1
20 8
Installation Option 2
13 15
8
13 18 8 8 7
6 6 Using a Xeriman Tool, insert the PC 36 7 For more precise water placement, use
9
6
Module directly into drip tubing
* 12 ¼” distribution tubing, a ¼” tubing
me
63
14 19 2 8
or between dripline emitters as stake, and a bug cap.
ystem
9
8
tsy
7
7 11 needed. Use a PC Diffuser
34 Cap to 17 6
43
ystem
8 8 34 3
8
*
8
15
eliminate squirting.
Sp
8 7
81
33 30
299
91
irD
9 33
2 8
epa
8
3 36
36 34 36 17 12 6
34 3
csd
13
71
5 29 32
* 12
10 12
18
12
31
25
Installation Option 3 Installation Option 4
naL
25 28
29
12
12 33 6 30
30
8 7
41
2
7
3
51
32
8 77 For7 precise water placement, a barbed
/
8 8 31 12
9 The Xeri-Bird 88provides a centralized
® no
21
92
connector can be punched into drip 77 location7 for up to eight
27 emitters. A mix
33
9 9
8
8 7
15
tubing. The PC Module with a PC
28
itag
8
26
26 of Xeri-Bug emitters and/ or PC
16 at the end 88
8
Diffuser3 Cap is then placed
18
34 6 Modules
32 can be used to provide the15 15
6
4 35
15
em
36
18
ireX
6 34 6 3 of the ¼"3 distribution tubing. NOTE: flow rates needed for different plant
43
34 34
25 28
9
12
02
should the emitter become dislodged,
7
33 6
yst
materials. Tentacles of ¼" distribution
g
30
and tlet Xe r
ne
scap ri-Bu
to
34
ripli
36. 1 ulti-O onnec
27
6
a fo
unregulated flow
30 will occur.
8
33
33 33 2 tubing, ¼” tubing stakes, and bug caps
eD
30
pS 21
C
12
8
61
35. ⁄4” Barb
u
8 allow for precise water placement.
18
19
ym
Dri
34. 1
PVC
33
297
⁄4”L
M
23 27
11
7 7
6
7
26
6
ota
ape
32
8
13
16 8
7
92
1
ter
Xeri-Black Stripe Tubing 11. Easy Fit Elbow 323518 17. 32
⁄4” Self-Piercing Barb 22. SEB-7X Emitter Valve Box 28.15XPCN Series 15
Nozzle Adapter 34. 1⁄4” Barb Connector
25
dap
2
nA
25 28 Connector
Xeri-Bug Emitter 18 12. Diffuser Bug Cap 18 23. XF Dripline 29. Easy Fit Tee
26
le A
dsc
35. Multi-Outlet Xeri-Bug
istrib ter - 10 line
136
17
g
ozz
rip
* 18. XPCN Series Nozzle
bin
PC28Emitter Diffuser Cap 28
utio 32
1 25 Stake
⁄4” Tubing 13. 24. Tubing Cutter 30. Easy Fit Flush Cap 36. 1⁄4” Landscape Dripline
XT-7 g Em pe D
01
30. asy Fit ries N
ap
Installation Option 5
n Tu
13
6
8
32. urple Flush C
92
19. Xeri-Pop
Lan
a
1
31. Purple Landscape Dripline
31. asy Fit ee
⁄4” Distribution Tubing 14. PC Module-1032 25. Xeri-Bird 8
dsc
e
8
29. XPCN S
T
it
88
8
Lan
20. Xeri-Bubbler SPYK 32. Xeri-Bug Emitter - 1032
14
1
⁄4” Barb Tee 15. PolyFlex Riser Assembly 26. Inline Pressure Regulator
2
9
27
15
i-Bu
00 D
27
E
Xeri-Bug Emitter - 1⁄2” The
FPT 6 Outlet21.
Manifold
Air Reliefprovides
Valve Kit a
28.
8 7 8 27. 6 Outlet Manifold
E
33. XT-700 Distribution Tubing
n ®/
Tie-Down Stake 16.
Xer
5
P
7
26
12
blE
27 centralized
PVC water distribution 27
7
29
77
6
7
33.
6
8
tiF
PVC
15
26 for15up to six emission
ysa .21
connection
x
35
e Bo
E .1
www.rainbird.com/drip
iD
Valv
15 15 15
devices. Connect15 ¼" distribution
1
4
tor
8
24. F Drip mitter
anif Regula
17. 1⁄4” Self-Piercing Barb 22. SEB-7X Emitter ValvetoBox
tubing 28. XPCN
one of the outlets. Series
Use a ¼”Nozzle Adapter 34. 1⁄4” Barb Connector
3
26. eri-Bir utter
line
34
E
old
Connector
utle essure
23. EB-7X
23. XF Dripline tubing stake to ensure29.precise Easy Fitwater
Tee 35. Multi-Outlet Xeri-Bug
C
27. Inline P 8
gni
20
7
ing
d
32
tM
S
r
18. XPCN Series Nozzle
buT ettimE ibuT ”4 1 .8
Tub
2
X
24. Tubing Cutter 30. Easy Fit Flush
a PC Cap
22.
1
placement. The PC Module with 36. 1⁄4” Landscape Dripline
b1
gni
epir
X
r
6O
buT
19. Xeri-Pop
25.
12
tS k uB-ireX 1 .7
25. Xeri-Bird 8 Diffuser Cap is placed31. on Purple Landscape
of the Dripline Drip Tip
eka
the end
16
noit eT braB iT .01
42
calB
tS g rtsiD ”4 1 .9
g
20. Xeri-Bubbler SPYK
rip
ecru
distribution tubing32. Xeri-Bug Emitter
the - 1032
u
26. Inline Pressure ¼" Regulator
n
to regulate
a1
-ireX .6
atS
e
b
33
i
rb
11
nwo
oS r
g Ba
21. Air Relief Valve Kit When using an emitter at the end of the ¼” distribution
m/d
27. 6 Outlet Manifold
6
33. XT-700 Distribution Tubing
zzle
water flow. NOTE: should the emitter
.5
⁄
D-e
18. onnec -Piercin
⁄
etaW
”4⁄
28. XPCN Series Nozzle Adapter
20. eri-Po ries No
34. ⁄4” Barb Connector
1
tubing, should the emitter become dislodged (or the
alve YK
31
19. PCN S or
become dislodged, unregulated flow
Kit
P
22
Reli bler S
t
7
29
C Self
29. Easy Fit Tee Nozzle
.co
35. 1Multi-Outlet Xeri-Bug ¼” tubing gets cut) unregulated flow will occur.
e
zzle28.
Adapter
XPCN Series 34. 1Adapter
⁄4” Barb Connector 34. ⁄4” Barb Connector
p
⁄4”
will occur.
ef V
2
b
17. 1
21. eri-Bu
retl
30. Easy
Easy Fit
FitTee
Flush Cap 1
⁄4” LandscapeXeri-Bug
rainbird.com/drip
29. 36. Multi-Outlet Dripline
bird
X
35. Multi-Outlet Xeri-Bug 35.
iF g tpadA ilpuoC mireX
X
X
Air
31. Easy
Purple
FitLandscape
36. Dripline
nita
ap 30. Flush Cap
re
evla R erus tiF ysa
10
1
⁄4” Landscape Dripline
36. 1⁄4” Landscape Dripline
12
tiK e lF woL .b1
lug
8
29
Vw
ain
32. Purple
Xeri-Bug Emitter - Dripline
1032
e
noZ
pe Dripline
31. Landscape
o
gn ooT na
elam tiF y
8
lort
33. Xeri-Bug
XT-700 Distribution Tubing
w.r
er - 1032
32. Emitter - 1032
9
serP
6. X lyFlex le-103 r Cap
eF
noC
l
itte 1 bly
.a1
T
PC M itter Cap
5
” FP
use
13. iffuse lbow
tion33.
Tubing
XT-700 Distribution Tubing
sem
ww
.1
2
Diff
saE .4
r - ⁄2
7
E
PC E r Bug
E
Bug iser As
6
12. asy Fit
.2
.3
Po odu
Em
m
R
8 www.rainbird.com
E
D
11.
200
4
eri-
94D
14.
15.
3Product Guide
ANATOMY
Pressure-Compensating Modules
10-32 Thread Inlet x Barb Outlet
Point-source medium-flow
PRODUCTS
modules for watering larger
shrubs and trees.
Landscape Drip System
PC-05-1032 PC-07-1032 PC-10-1032
NARROW BEDS
(5 GPH) (7 GPH) (10 GPH)
13
13 Installation Option181 12
12
25
25 Installation Option 2
PARKING LOT
36
Use a 10-32 threaded emitter with a The Xeri-Bird 8 provides a centralized
PolyFlex Riser for point-source 77 12
location for up to eight emitters. A mix
14
14 19 26
applications in high foot traffic areas. 88
26 of Xeri-Bug emitters and/ or PC
8 through a flower
(A pedestrian walking Modules can be used to provide the
flow rates needed for different plant
15 bed could pull up a staked emitter or
15 materials. Tentacles of ¼" distribution
8 7
PARKWAYS/
otherwise cause misalignment of the
WALKWAYS
tubing, ¼” tubing stakes, and bug caps
¼" distribution tubing. If they stepped allow for precise water placement.
9
Anatomy of a Xerigation® / Landscape D
on a PolyFlex Riser, the emitter would
stay in place.)
2 8
17
POTS/BASKETS
34 6 3
PC Diffuser
29 Installation Option 1
33
13
13
30
Use a PC Diffuser cap to eliminate PC Diffuser Use a PC Diffuser Cap to eliminate
14
14
squirting water when using a PC (Black) squirting water when using a PC
20 Module staked at the end of ¼”
SLOPES
Module staked at the end of a
1/4” distribution tubing or on a 8
distribution tubing or on a PolyFlex
15
15
Riser. 32
PolyFlex Riser.
6 6 18
PC-DIFF-PPL (Purple
25to designate non-potable water) 28
STREET MEDIANS
12 6
2
Pressure Compensating
7 8 8 Threaded
7
Bubblers
11 8 34
7 27
7 7
Rain Bird’s new heavy-duty 26 Installation Option 1
6 pressure compensating bubblers 8
15
29
15
WALLS
35 PCT Bubblers can be mounted on a
1b are designed for a rugged 9 33
½” schedule 80 riser to connect to
environment. Offered in 5 gph, PVC
3
7 gph, and 10 gph models, the PCT-05 PCT-07 PCT-10
bubbler style outlet and medium-
GOLF COURSES
flow
2
options provide more 5 10 29
flexibility for landscape layout. Its
PVC
heavy-duty design is perfect for 12
commercial applications. The 1⁄2”
FPT threaded inlet makes these 31 12
ing Barb devices ideal
22. SEB-7X Emitter Valve Box
for installations 28. XPCN Series Nozzle Adapter 34. 1⁄4” Barb Connector
TREES
using a PVC23. pipe
XF Dripline
and schedule 80 29. Easy Fit Tee 35. Multi-Outlet Xeri-Bug
7
Nozzle risers. 24. Tubing Cutter 30. Easy Fit Flush Cap 36. ⁄4” Landscape Dripline
1
16
24 25. Xeri-Bird 8 4 31. Purple Landscape Dripline 35
r SPYK 26. Inline Pressure Regulator 32. Xeri-Bug Emitter - 1032
ve Kit www.rainbird.com
27. 6 Outlet Manifold 33. XT-700 Distribution Tubing 9Product Guide
Diffuser Bug Cap
Prevents bugs and other debris DBC-025
from clogging 1/4” distribution
tubing.
12
Installation Option 1
8 Use a Diffuser Bug Cap at the end of ¼”
7 distribution tubing to prevent clogging
caused by bugs and other debris.
6
Xeri-Pop™ Micro-Spray
½” FPT Inlet x Barb Outlet
Pop-up spray for low-volume
irrigation. Ideal for flower beds
and vandal-prone areas.
XBT-400X XBT-600X XBT-1200X
(4 inch pop-up) (6 inch pop-up) (12 inch pop-up)
18
18 Installation Option 1 Installation Option 2
19 The Xeri-Pop Micro-Spray allows you to 19 Connect the Xeri-Pop Micro-Spray to a
27
incorporate spray heads into your drip multi-outlet manifold (EMT-6Xeri) via
8
system. Connect the Xeri-Pop ¼” distribution tubing.
Micro-Spray to drip tubing via ¼”
distribution tubing and a barb
17 connector. 8
SQ Nozzle Models:
Drip Tip • SQ QTR - Quarter Pattern
Any SQ nozzle can be swapped out for desired
• SQ HLF - Half Pattern
spray pattern. (Xeri-Pop ships with 1/2 pattern nozzle.
1/4 and and full pattern nozzles also available) • SQ FUL - Full Pattern
10 www.rainbird.comProduct Guide
ANATOMY
SQ Series Nozzles
The pressure compensated SQ Series Quarter Pattern Nozzle Half Pattern Nozzle Full Pattern Nozzle
Color: Purple Color: Brown Color: Red
is the most precise and efficient, low- Model: SQ QTR Model: SQ HLF Model: SQ FUL
volume spray solution for irrigation
PRODUCTS
of small areas. Unique edge-to-edge
capability reduces the number of nozzles
needed, which decreases cost and
dramatically reduces installation time.
Top View Bottom View Bottom View Bottom View
NARROW BEDS
Each nozzle can easily switch between a
2.5 ft. or 4 ft. throw.
12
8 7
PARKING LOT
9
34 6 3
Quarter Pattern Half Pattern Full Pattern
33 30
PARKWAYS/
WALKWAYS
32
18
18
28
28 Installation Option 1 18 Installation Option 2
The SQ can be connected to PE or PVC 19 The SQ can be installed on a Xeri-Pop
POTS/BASKETS
8
27 via a PolyFlex Riser via the SQ ADP Spray Head. The Xeri-Pop can be
7 8
adapter. The SQ ADP12 is the SQ ADP connected to PE or PVC. The Xeri-Pop
15
15 adapter preassembled to a 12” PolyFlex
15 can also be connected to drip or drip
Riser. The SQ ADP24 is the SQ ADP line tubing via ¼” tubing and a barb
connector. NOTE: Use one of these
adapter preassembled to a 24” polyfelx 17
configurations in each watering zone to
riser.
provide a pop-up run indicator for your
drip system.
SLOPES
e Adapter 34. 1⁄4” Barb Connector
35. Multi-Outlet Xeri-Bug
36. 1⁄4” Landscape Dripline
STREET MEDIANS
Dripline 18
1032 Installation Option 3 Installation Option 4
n Tubing 18
The SQ can be installed on a Rain Bird The SQ can be attached to a schedule
1800 Series Spray Head. 80 PVC or PE riser using a PA-8S Plastic
* Shrub Adapter.
*
WALLS
GOLF COURSES
Drip Tip
With a simple turn of the nozzle to the next preset
stop, the SQ Series Nozzle adjusts from a 2.5 foot
throw to a 4 foot throw.
TREES
www.rainbird.com 11Product Guide
Xeri-Bubblers™
Spike
Emission device with adjustable
flow and radius. Ideal for shrub
plantings, trees, containers, and
flower beds.
f a Xerigation®® / Landscape Drip System SXB-180-SPYK UXB-360-SPYK
SXB-360-SPYK
13
13
18
18
36
36
12
12
14
14 19
19
20
20
20
Installation Option 1 88
Installation Option 2
88 8
The Xeri-Bubbler
15
15 Spike combines a Connect up to88six Xeri-Bubbler
27 77 Spikes
bubbler with a ¼” tubing stake for via ¼” distribution tubing to a
66 20
precise water placement. Simply 99 multi-outlet manifold (EMT-6Xeri).
connect the Xeri-Bubbler
22 Spike to
88
drip tubing via a barb connector.
7 34
34
34 NOTE: The Xeri-Bubbler Spike comes17
17
11
11 34
34 66 33
with its own barb connector.
33
33 30
30
29
29
33
33
29
29
Xeri-Bubblers™ 32
32
18
18
Barb 12
12
25
25
66
28
28
Emission
31
31 device with1212adjustable
88
flow and radius. Ideal for shrub 77
77 27
27
plantings, trees, containers, and77 26
26
flower beds. 16
16 SXB-180-025 88 SXB-360-025 UXB-360-025
15
15 15
15
35
35
22
** **
Installation Option 1 Installation Option 2
29
29 PVC
PVC
8
A barbed connector can be punched 27 Connect up to six Xeri-Bubblers via ¼”
8 7
into distribution tubing. The Xeri- 7 distribution tubing to a multi-outlet
titElbow
Elbow 17. 11⁄4⁄4””Self-Piercing
17. Self-PiercingBarb
Barb 22. SEB-7X
22.
Bubbler is then placed SEB-7X Emitter
at theEmitter Valve
end ofValve Box
the Box 28. XPCN
28. XPCNSeries
SeriesNozzle
NozzleAdapter
Adapter 34. 11⁄4⁄4””Barb
34.
manifold (EMT-6Xeri). Barb Connector
UseConnector
a ¼” tubing
er BugCap
r Bug Cap Connector
Connector 23. XF
23.
¼" distribution tubing.XFDripline
Dripline 29. Easy
29. EasyFit
FitTee
Tee 35.watering.
35.
stake for precise Multi-OutletXeri-Bug
Multi-Outlet Xeri-Bug
itterDiffuser
tter DiffuserCap Cap 18. XPCN
18. XPCNSeries SeriesNozzle
Nozzle
NOTE: should the24.bubbler
24. Tubing
Tubing become
Cutter
Cutter 30. Easy
30. EasyFit
FitFlush
FlushCap
Cap NOTE: should36.the 1bubbler
36. become
⁄4⁄4””Landscape
1
Landscape Dripline
Dripline
odule-1032
dule-1032 19. Xeri-Pop
19. Xeri-Pop dislodged, unregulated Xeri-Birdwill
flow
25. Xeri-Bird
25. 88 occur. 31. Purple
31. PurpleLandscape
LandscapeDriplinedislodged, unregulated flow will occur.
Dripline
ex RiserAssembly
x Riser Assembly 34 20. Xeri-Bubbler
20. Xeri-BubblerSPYK
SPYK 26. Inline
26. InlinePressure
PressureRegulator
Regulator 32. Xeri-Bug
32. Xeri-BugEmitter
Emitter--1032
1032
ug Emitter-- ⁄2⁄2””FPT
ugEmitter 11
FPT 21. Air
21. AirRelief
ReliefValve
ValveKit
Kit 27. 66Outlet
27. OutletManifold
Manifold 33. XT-700
33. XT-700Distribution
DistributionTubing
Tubing
www.rainbird.com/drip Use with 1/2" poly
12 www.rainbird.comProduct Guide
ANATOMY
Xeri-Bubblers™
10-32 Thread
Emission device with adjustable
PRODUCTS
flow and radius. Ideal for shrub
plantings, trees, containers, and
flower beds.
NARROW BEDS
SXB-180-1032 SXB-360-1032 UXB-360-1032
Half Circle Stream Bubbler Full Circle Stream Bubbler Full Circle Umbrella Bubbler
PARKING LOT
*
B*
Installation Option 1
Use a 10-32 threaded bubbler with a
PolyFlex Riser for point-source
applications in high foot traffic areas.
(A pedestrian walking through a flower
PARKWAYS/
WALKWAYS
bed could pull up a staked bubbler or
15
15
otherwise cause misalignment of the
¼" distribution tubing. If they stepped
on a PolyFlex Riser, the bubbler would
stay in place.)
POTS/BASKETS
Xeri-Sprays™ and Misters
SLOPES
10-32 Thread
Sprays and misters with adjustable
flow and radius. Ideal for ground
STREET MEDIANS
cover, mass plantings, annual
flower beds, and containers.
XS-090 XS-180 XS-360 X-360 ADJMST
Quarter Circle Spray Half Circle Spray Full Circle Spray Full Circle Adjustment Mister
WALLS
** Installation Option 1
GOLF COURSES
Use a 10-32 threaded spray or mister
with a PolyFlex Riser for point-source
applications. Threaded emission
devices on PolyFlex Risers are great for
high foot traffic areas.
15
15
TREES
www.rainbird.com 13Product Guide
Xeri-Spray™ 360° True Spray
Spike
True micro-spray with full-circle
fan spray pattern. Ideal for ground
cover, mass plantings, annual
flower beds, and containers.
XS-360TS-SPYK
D*
D** D** 8
Installation Option 1 Installation Option 2
rigation / Landscape Drip System ® 88
The Xeri-Spray 360° True Spray Spike
D* 8 27
Connect up to six Xeri-Spray 360° True
combines a spray head with a ¼” Spray Spikes via ¼” distribution tubing
13 tubing stake for precise water to a multi-outlet manifold (EMT-6Xeri).
placement. Simply connect18 the 36
Xeri-Spray 360° True Spray Spike to
34 12
34
34 14 drip tubing via a barb connector.
19 NOTE:
20 The Xeri-Spray 360°8 True Spray Spike
8
15 comes with its own barb connector.
8 7
9
2
Xeri-Spray™ 360° True Spray
8
34 17 6
34 3
Barb or 10-32 Thread
33 30
29
True micro-spray with full-circle
33
fan spray pattern. Ideal for ground
cover, mass plantings, annual
flower beds, and containers. XS-360TS-025 XS-360TS-1032 32
18
25 28
12 6
E**
**
31 12 Installation Option 1 Installation Option 2
88
7 27
27
7 A barbed connector can be punched 77 Connect up to six Xeri-Bubblers via ¼”
8 7 26
into drip tubing. The Xeri-Bubbler is distribution tubing to a multi-outlet
16 8
then placed
35 at the end of the ¼" manifold
15 (EMT-6Xeri).
15 Use a ¼” tubing
distribution tubing. NOTE: should the stake for precise watering. NOTE:
bubbler become dislodged, should the bubbler become dislodged,
unregulated flow will occur. unregulated flow will occur.
2
34
29 PVC
17. 1⁄4” Self-Piercing Barb 22. SEB-7X Emitter Valve Box 28. XPCN Series Nozzle Adapter 34. 1⁄4” Barb Connector
Connector 23. XFInstallation
Dripline Option 3 29. Easy Fit Tee
18. XPCN Series Nozzle
*
F *
35. Multi-Outlet Xeri-Bug
p 24. Tubing Cutter 30. Easy Fit Flush Cap 36. 1⁄4” Landscape Dripline
19. Xeri-Pop 25.Use
Xeri-Bird 8 threaded bubbler with a31. Purple Landscape Dripline
a 10-32
y 20. Xeri-Bubbler SPYK 26.PolyFlex
Inline Pressure Regulator
Riser for 32. Xeri-Bug Emitter - 1032
point-source applications
PT 21. Air Relief Valve Kit 27.in6high
Outlet Manifold
foot 33. XT-700 Distribution Tubing
traffic areas. (A pedestrian
walking through a flower bed could pull
15
15
up a staked bubbler or otherwise cause
www.rainbird.com/drip misalignment of the ¼" distribution
tubing. If they stepped on a PolyFlex Riser,
the bubbler would stay in place.)
14 www.rainbird.comProduct Guide
ANATOMY
Control Zone Kit Selection Guide
Rain Bird Control Zone Kits provide all the components necessary for on/off control, filtration and
pressure regulation of a low-volume irrigation zone, making them simpler to order and easier to
PRODUCTS
install.
NARROW BEDS
2-Wire 2-Wire 2-Wire
ble ble ble
Compati Compati Compati
PARKING LOT
XCZ-150-LCS XCZ-150-LCDR XCZ-150-PRB-COM
FLOW: 15 - 62 gpm FLOW: 15 - 62 gpm FLOW: 15 - 40 gpm
Commercial High Flow: 15 - 62 gpm
2-Wire 2-Wire 2-Wire
ble ble ble
PARKWAYS/
WALKWAYS
Compati Compati Compati
XCZ-100-PRB-COM XCZ-100-PRBR XCZ-100-PRB-LC
FLOW: 0.3 - 20 gpm FLOW: 0.3 - 20 gpm FLOW: 0.3 - 20 gpm
POTS/BASKETS
Commercial Wide Flow: 0.3 - 20 gpm
2-Wire
ble
C mpati
o
SLOPES
XCZPGA-100-PRF XCZ-100-PRF XACZ-100-PRF
FLOW: 3 - 15 gpm FLOW: 3 - 15 gpm FLOW: 3 - 15 gpm
Residential Medium Flow: 3 - 15 gpm
STREET MEDIANS
XCZ-LF-100 XCZ-075-PRF XACZ-075-PRF
FLOW: 0.2 - 5 gpm FLOW: 0.2 - 5 gpm FLOW: 0.2 - 5 gpm
Residential Low Flow: 0.2 - 10 gpm Residential Low Flow: 0.2 - 5 gpm
WALLS
GOLF COURSES
TREES
www.rainbird.com 15Application Guide
Narrow Planting Bed Next
To a Structure
Sparse Applications
Solution
Xeri-Bird 8 & Xeri-Bug Emitters on a PVC Lateral
Advantages
• Up to 60% water savings
• No overspray damage to structures,
fences or windows
• Targeted watering reduces weed growth
• Manifold design allows for increase/decrease in
future plant water demands
XBD-80 Xeri-Bird 8 Outlet Manifold
XB XX* Xeri-Bug Pressure Compensating
Drip Emitters (0.5 to 2.0 gph)
PRS-050-30 In-stem 30 psi Pressure Regulator
XQ-100 1/4” Distribution Tubing
TS-025 1/4” Tubing Stake
PVC Misc PVC Laterals, Fittings, Glue
XBD-80 PRS-050-30 XB XX
DBC-025 Diffuser Bug Cap
SEB7X Emitter Box (optional)
* Select appropriate emitter flow
TO DO LIST : TIME: (approx.)
Trench, cut and glue PVC laterals. 1 hr/20'
Connect lines to water source. 1 hr
Thread Xeri-Bird 8 Outlet Manifold onto in-stem 30 psi Pressure Regulator, then 5 min/Assembly
connect to PVC tee.
Attach 1/4” distribution tubing to outlets on Xeri-Bird 8 Outlet Manifold. 3 min/Xeri-Bird 8
Run 1/4” lines to sparse plantings, stake in place with a Diffuser Bug Cap on the end. 8 min/Stake
Install the desired Xeri-Bug Emitter inside Xeri-Bird 8 Outlet Manifold. 2 min
Use an SEB7X Emitter Box as added protection for the Xeri-Bird 8. (optional)
INSTALLATION AND MAINTENANCE TIPS :
Flush the zone after installation and 2-4 times per year.
Install XB Emitters in Xeri-Bird 8 Outlet Manifold with self-piercing barb or 1032 thread end up.
Adjust watering time as seasons/weather changes.
Leave 6” slack in 1/4” tubing in case of unexpected maintenance.
16 www.rainbird.comApplication Guide
W/CAP
www.rainbird.com
TUBING STAKE
WATER SOURCE
PVC LATERAL
XBD-80
17
PARKWAYS/
TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS ANATOMY
WALKWAYSApplication Guide
Narrow Planting Bed Next
To a Structure
Dense Applications
Solution
XFD Dripline Grid
Advantages
• Up to 60% water savings due to zero wind loss
• No runoff = reduced liability in high traffic areas
• No overspray damage to structures, fences or windows
• XFD Dripline is easy to install, resulting in labor savings
Installation
XFD-06-12 XFD Dripline .6 gph @ 12" Spacing
XCZ-100-PRF 1" Xeri Control Zone Kit
ARV050 ½” Air Relief Valve
MDCF Series Easy Fit Compression Fittings/Adapters
OR
XFF Series XFF Dripline 17mm Insert Fittings
TDS-050 Tie Down Stake
1/2"AIR RELIEF VALVE KIT XFF FITTINGS
TO DO LIST : TIME: (approx.)
Assemble Control Zone Kit and connect to water source. 1hr
Cut lengths of XF Dripline to build grid in planting area. 10min/50'
Connect lengths of XF Dripline to Easy Fit Fittings (or XFF Dripline Fittings) to create grid. 25 min/50'
Add 1/2" Air Relief Valve kit to the zone. 5 min
Connect Easy Fit Adapter to Easy Fit Tee for connection to Control Zone Kit. 5 min/50'
Stake XF Dripline grid in place and flush until clean water flows.
Install planting material.
INSTALLATION AND MAINTENANCE TIPS :
Flush the zone after installation and 2-4 times per year.
Install Air Relief Valve Kit at high point in the system.
Leave XFD Dripline coil in the sun while preparing for installation.
18 www.rainbird.comApplication Guide
ANATOMY
PRODUCTS
MDCF FITTINGS
or XFF FITTINGS
BUIL
DING
NARROW BEDS
PARKING LOT
PARKWAYS/
WALKWAYS
WATER SOURCE
POTS/BASKETS
W/ XCZ-100-PRF
SLOPES
XFD DRIPLINE
STREET MEDIANS
TIE DOWN STAKES
WALLS
AIR RELIEF VALVE
GOLF COURSES
TREES
www.rainbird.com 19Application Guide
Narrow Planting Bed Next
To a Structure
Dense Applications
Solution
SQ Series Nozzle
Advantages
• Precise square wetting pattern – reducing overspray,
overwatering, and runoff
• Up to 65% water savings due to efficient control of
water placement with pressure compensation
• Adjustable radius or throw in one unit makes design
and installation simple
• Highest distribution uniformity in the industry for short
radius nozzles
Installation
SQ–XXX*
SQ Series Nozzles
PA-8S Plastic Shrub Adapter for use with Schedule 80 Risers
OR
SQ ADP SQ PolyFlex Riser Adapter for use with PFR-FRA
PolyFlex Risers
PFR-FRA
12” PolyFlex Riser with ½” Male Threaded Base Adapter
PVC Misc PVC Laterals, Fittings, Glue
* Half, full, or quarter nozzles as needed for planting bed SQ NOZZLES
TO DO LIST : TIME: (approx.)
Trench, cut and glue PVC laterals. 1 hr / 20’
Connect lines to water source. 1 hr
Thread in Schedule 80 riser, attach PA-8S Adapter and SQ Series Nozzle. 5 min / Assembly
OR
Thread in PFR-FRA 12” PolyFlex Riser into PVC tee, attach SQ ADP Adapater and 5 min / Assembly
SQ Series nozzle.
INSTALLATION AND MAINTENANCE TIPS :
Flush the zone after installation and 2-4 times per year.
Adjust watering time as seasons/weather changes.
Ensure that all SQ Series Nozzles are adjusted to the appropriate throw distance.
Drip Tip
All SQ Series Nozzles in the same zone should be
adjusted to either 2.5' or 4' throw. DO NOT mix throw
settings in the same zone.
20 www.rainbird.comApplication Guide
www.rainbird.com
BUILDING
SQ NOZZLE ON
or POLYFLEX RISER
SCHEDULE 80 RISER
PVC LATERAL
2.5
21
PARKWAYS/
TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS ANATOMY
WALKWAYSApplication Guide
Narrow Beds
Raised Beds
Solution
XFCV Dripline Grid
Advantages
• Up to 60% water savings due to zero wind loss
• Targeted watering helps reduce erosion of wall
• No runoff = reduced liability in high traffic areas
• XFCV Dripline is easy to install, resulting in labor savings
Installation
XFCV-06-12 XFCV Dripline .6 gph @ 12" spacing
MDCF Series Easy Fit Compression Fittings/Adapters
OR
XFF Series XFF Dripline 17mm Insert Fittings
TDS-050 BEND Tie Down Stake
XFF FITTINGS XFCV Dripline
TO DO LIST : TIME: (approx.)
Assemble Control Zone Kit and connect to water source. 1 hr
Cut lengths of XFCV Dripline to build grid in crib wall. 10 min/50’
Connect lengths of XF Series Dripline to Easy Fit Fittings (or XFF Dripline fittings) to create grid. 30 min/50’
Connect to Control Zone Kit.
Stake XF Series Dripline grid in place and flush until clean water flows. 5 min/10’
Install planting material.
INSTALLATION AND MAINTENANCE TIPS :
Flush the zone upon installation and 2-4 times per year.
Leave XFCV Dripline coil in the sun while preparing for installation.
Break up watering cycles to avoid run off or pooling of water in blocks.
22 www.rainbird.comApplication Guide
www.rainbird.com
WATER SOURCE
XFCV DRIPLINE
TIE DOWN STAKES
MDCF FITTINGS
or XFF FITTINGS
23
PARKWAYS/
TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS ANATOMY
WALKWAYSApplication Guide
Narrow Planting Bed Next
To a Structure
Combination Applications
Solution
XFD Dripline Grid with Xeri-Bug Emitters
Advantages
• Up to 60% water savings due to zero wind loss
• XFD Dripline is easy to install for labor savings
• No overspray damage to structures, fences or
windows
Installation
XFD-06-12 XFD Dripline .6 gph @ 12” Spacing
XCZ-075-PRF 3/4” Xeri Control Zone Kit
MDCF Series Easy Fit Compression Fittings/Adapters
OR
XFF Series XFF Dripline 17mm Insert Fittings
TDS-050 BEND Tie Down Stake
ARV050 1/2" AIr Relief Valve
XB XX* Xeri-Bug Pressure Compensating XFD TS-025 XB XX
Drip Emitters (0.5 to 2.0 gph)
DT-025 1/4” Distribution Tubing
TS-025 1/4” Tubing Stake
DCB-025 Diffuser Bug Cap
* Select appropriate emitter flow rate
TO DO LIST : TIME: (approx.)
Assemble Control Zone Kit and connect to water source. 1 hr
Cut lengths of XFD Dripline to build grid in planting area. 10 min/50’
Connect lengths of XF Series Dripline to Easy Fit Fittings (or XFF Dripline fittings) to create grid, 20 min/50’
add Air Relief Valve
Connect Easy Fit Adapter to Easy Fit Tee for connection to Control Zone Kit. 5 min
Stake XF Series Dripline grid in place. 5 min/10’
Punch self-piercing barb inlet of Xeri-Bug Emitters into XF Series Dripline, 8 min/Emitter
connect 1/4” tubing to barb outlet and run 1/4” tubing to larger plant.
Stake tubing in place and attach Diffuser Bug Cap on the end. 3 min/Stake
Flush system until clean water flows. 2 min
Install planting material.
INSTALLATION AND MAINTENANCE TIPS :
Supplemental Xeri-Bug Emitters are placed next to larger plants with higher water requirements.
Flush the zone upon installation and 2-4 times per year.
Install Xeri-Bug Emitters with the Xeriman Tool (XM Tool) for 50% faster installation.
Leave XF Series Dripline coil in the sun while preparing for installation.
24 www.rainbird.comApplication Guide
ANATOMY
PRODUCTS
WATER SOURCE
NARROW BEDS
XB EMITTER
PARKING LOT
BUILDING
PARKWAYS/
WALKWAYS
POTS/BASKETS
XFD DRIPLINE
TUBING STAKE
W/CAP
TIE DOWN STAKES
SLOPES
STREET MEDIANS
WALLS
AIR RELIEF VALVE
GOLF COURSES
MDCF FITTINGS
or XFF FITTINGS
TREES
www.rainbird.com 25Application Guide
Narrow Planting Bed/Divider
Sparse Applications
Solution
PolyFlex Riser/Adapter with Xeri-Bug 10-32 Drip
Emitters on a PVC Lateral
Advantages
• Up to 60% water savings
• No overspray damage to vehicles or parking lot
• Targeted watering reduces weed growth
• No runoff = reduced liability in high traffic areas
Installation
PFR/FRA PolyFlex Riser/Adapter
XB XX* 10-32 Xeri-Bug Pressure Compensating Drip Emitters
(0.5 to 2.0 gph) w/ 10-32 Thread
PVC Misc. PVC Laterals, Fittings, Glue
XCZ-075-PRF 3/4" Xeri Control Zone Kit
* Select appropriate emitter flow rate
XB XX 10-32 PFR-FRA
TO DO LIST : TIME: (approx.)
Trench, cut and glue PVC laterals. 1 hr/20'
Assemble Control Zone Kit and position in valve box. 1 hr
Connect Control Zone to water source and laterals. 1 hr
Thread PolyFlex Riser/Adapter into PVC tees. 5 min/Tee
Thread Xeri-Bug Emitter into PolyFlex Riser. 5 min/PFR
Flush system until clean water flows. 2 min
Add planting material and mulch.
INSTALLATION AND MAINTENANCE TIPS :
Flush the zone after installation and 2-4 times per year.
For larger trees use higher flow PC Modules and Diffuser caps to avoid wash out.
Adjust watering time as seasons/weather changes.
Cut PolyFlex Risers slightly above grade (before installing the Xeri-Bug Emitters) for an "invisible" installation.
The PolyFlex Riser Adapter (FRA) is made of Marlex®, so no Teflon® tape is needed.
26 www.rainbird.comApplication Guide
www.rainbird.com
PVC LATERAL
XB EMITTER ON RISER
27
PARKWAYS/
TREES GOLF COURSES WALLS STREET MEDIANS SLOPES POTS/BASKETS PARKING LOT NARROW BEDS PRODUCTS ANATOMY
WALKWAYSApplication Guide
Narrow Planting Bed/Divider
Dense & Combination Applications
Solution Solution (Combination)
XF Series Dripline Grid SQ Series Nozzle on 1800 Spray Heads with
Swing Assembly on PVC Lateral
Advantages Advantages
• Up to 60% water savings due to zero wind loss • Precise square wetting pattern reduces overspray,
• No overspray damage to vehicles overwatering, and runoff = up to 65% water saving
• No runoff = reduced liability in high traffic areas • Adjustable radius in one unit makes design and
installation simple
• XF is easy to install, resulting in labor savings
• Highest distribution uniformity in the industry for
short radius nozzles
Installation Installation
XFD-06-12 XFD Dripline .6 gph @ 12” Spacing SQ–XXX* SQ Series Nozzles
OR 180X 1800 Series Spray Head with Desired
XFS-06-12 Subsurface Dripline .6 gph @ 12” Spacing Pop-up Height
XCZ-100-PRF 1” Control Zone Kit SA-XXX SA Series Swing Assembly
ARV-050 1/2" Air Relief Valve PVC Misc PVC Laterals, Fittings, Glue
MDCF Series Easy Fit Compression Fittings/Adapters * Half, full, or quarter nozzles as needed for planting bed
OR
XFF Series XFF Dripline 17mm Insert Fittings
TDS-050 Tie Down Stake
TO DO LIST : TO DO LIST :
Assemble Control Zone Kit and connect to water source. (1 hr) Trench, cut and glue PVC laterals. (1 hr/20')
Connect Easy Fit Adapter to Easy Fit Tee for connection to Connect lines to water source. (1 hr)
Control Zone Kit. (5 min) Thread 1800 Series Spray Head onto swing assembly then
Cut lengths of XF Series Dripline to build grid in planting thread the swing assembly into the Slip x Slip x Threaded
area. (10 min/50') Tee PVC fitting. (5 min/Assembly)
Connect lengths of XFD Dripline to Easy Fit (or XFF Insert) Cut PVC laterals and glue in Slip x Slip x Threaded Tee
Fittings to create grid. Add Air Relief Valve Kit to the zone. assembly. (5 min/Tee)
(25 min/50')
Flush system until water flows clear. (As needed)
Stake XFD Dripline grid in place and flush until clean
Install SQ Series nozzles on 1800 Spray Heads.
water flows. (5 min/10')
(2 min/Nozzle)
Install planting material.
INSTALLATION AND MAINTENANCE TIPS : INSTALLATION AND MAINTENANCE TIPS :
Flush the zone upon installation and 2-4 times per year. Flush the zone after installation and 2-4 times per year.
Install AR Valve Kit at high point in the system. Adjust watering time as seasons/weather changes.
Leave XF Dripline coil in the sun while preparing Ensure that all SQ Series nozzles are adjusted to the
for installation. appropriate throw distance.
28 www.rainbird.comApplication Guide
Solution (Dense)
ANATOMY
AIR RELIEF VALVE
PRODUCTS
TIE DOWN STAKES
NARROW BEDS
MDCF FITTINGS
PARKING LOT
or XFF FITTINGS
PARKWAYS/
WALKWAYS
XF SERIES DRIPLINE
POTS/BASKETS
Solution (Combination)
SLOPES
STREET MEDIANS
1800 SPRAY HEAD W/
SQ SERIES NOZZLE
WALLS
PVC LATERAL
GOLF COURSES
TREES
www.rainbird.com 29You can also read
