DIMENSIONAL BUTTERFLIES - FREESTANDING - Embroidery Online
←
→
Page content transcription
If your browser does not render page correctly, please read the page content below
#51247
2 DESIGNS
FREESTANDING
DIMENSIONAL BUTTERFLIES
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved.
MATERIALS
Isacord Thread Colors
0108 Cobblestone
2508 Hot Pink
2530 Rose
2920 Purple
3030 Amethyst
3906 Pacific Blue
3962 River Mist
4174 Charcoal
4620 Jade
4740 Aquamarine
*Instructions included after design list
It is
It is a violationofofCopyright
a violation Copyright law
law to
to make and distribute
distribute copies
copiesof
ofelectronic
electronicdesigns
designsororartwork.
artwork.
Electronicdesigns
Electronic designsare arelicensed
licensedto
tothe
theoriginal
original purchaser
purchaser for use at
at one
one location.
location.©2021 OESD, LLC.
©2021 OESD, LLC.AllAllrights reserved.
rights reserved. 2
DESIGNS
Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity
when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.
FABRIC REQUIRED 51247-01 Top Left Butterfly Wing FSA
Size Inches: Size mm: Stitch Count:
7.28 X 5.23 in. 185.0 X 132.8 mm 18618 St.
n 1. Front & Back Pink Fabric Placement Stitch...2530
n 2. Cut Line & Tackdown..............................................2530
n 3. Light Pink Cover Stitch & Lace...........................2530
n 4. Light Blue Linework................................................. 4740
n 5. Dark Pink Cover Stitch & Linework..................2508
FABRIC REQUIRED 51247-02 Top Right Butterfly Wing FSA
Size Inches: Size mm: Stitch Count:
7.28 X 5.23 in. 185.0 X 132.8 mm 18730 St.
n 1. Front & Back Pink Fabric Placement Stitch...2530
n 2. Cut Line & Tackdown..............................................2530
n 3. Light Pink Cover Stitch & Lace...........................2530
n 4. Light Blue Linework................................................. 4740
n 5. Dark Pink Cover Stitch & Linework..................2508
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved. 3
DESIGNS
Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity
when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.
FABRIC REQUIRED 51247-03 Bottom Left Butterfly Wing FSA
Size Inches: Size mm: Stitch Count:
5.89 X 3.97 in. 149.5 X 100.9 mm 14064 St.
n 1. Front & Back Teal Fabric Placement Stitch... 4740
n 2. Cut Line & Tackdown.............................................. 4740
n 3. Light Aqua Cover Stitch & Lace......................... 4740
n 4. Light Pink Linework.................................................2530
n 5. Dark Aqua Cover Stitch & Linework................4620
FABRIC REQUIRED 51247-04 Bottom Right Butterfly Wing FSA
Size Inches: Size mm: Stitch Count:
5.89 X 3.97 in. 149.5 X 100.9 mm 14181 St.
n 1. Front & Back Teal Fabric Placement Stitch... 4740
n 2. Cut Line & Tackdown.............................................. 4740
n 3. Light Aqua Cover Stitch & Lace......................... 4740
n 4. Light Pink Linework.................................................2530
n 5. Dark Aqua Cover Stitch & Linework................4620
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved. 4
DESIGNS
Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity
when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.
FABRIC REQUIRED 51247-05 Butterfly Body FSA
Size Inches: Size mm: Stitch Count:
6.35 X 2.47 in. 161.3 X 62.6 mm 5316 St.
n 1. Front & Back Black Fabric Placement Stitch.4620
n 2. Cut Line & Tackdown..............................................4620
n 3. Aqua Lace....................................................................4620
n 4. Gray Cover Stitch & Detail................................... 0108
51247-06 Top Left Butterfly Wing FSL
Size Inches: Size mm: Stitch Count:
7.28 X 5.23 in. 185.0 X 132.8 mm 32775 St.
n 1. Light Blue Lace...........................................................3962
n 2. Dark Blue Lace..........................................................3906
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved. 5
DESIGNS
Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity
when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.
51247-07 Top Right Butterfly Wing FSL
Size Inches: Size mm: Stitch Count:
7.28 X 5.23 in. 185.0 X 132.8 mm 32775 St.
n 1. Light Blue Lace...........................................................3962
n 2. Dark Blue Lace..........................................................3906
51247-08 Bottom Left Butterfly Wing FSL
Size Inches: Size mm: Stitch Count:
5.89 X 3.98 in. 149.5 X 101.1 mm 22001 St.
n 1. Light Purple Lace.................................................... 3030
n 2. Dark Purple Lace......................................................2920
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved. 6
DESIGNS
Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity
when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.
51247-09 Bottom Right Butterfly Wing FSL
Size Inches: Size mm: Stitch Count:
5.89 X 3.98 in. 149.5 X 101.1 mm 22001 St.
n 1. Light Purple Lace.................................................... 3030
n 2. Dark Purple Lace......................................................2920
51247-10 Butterfly Body FSL
Size Inches: Size mm: Stitch Count:
6.35 X 2.47 in. 161.3 X 62.6 mm 10872 St.
n 1. Purple Lace................................................................ 3030
n 2. Light Blue Lace...........................................................3962
n 3. Charcoal Lace..............................................................4174
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved. 7
MATERIALS
Stabilizer
• OESD AquaMesh
• OESD BadgeMaster
• OESD StabilStick CutAway
Fabric/Textiles
• 5” x 7” Pink applique fabric- 4 required
• 4” x 5” Teal applique fabric- 4 required
• 3” x 6.5” Black applique fabric- 2 required
• Note: Fabric sizes are estimates and may result in overage.
Notions & Tools
• OESD Perfect Punch Tool
• OESD Perfect Embroidery Press Cloth
• OESD Expert Embroidery Tape TearAway
• Organ Needle Titanium Sharp 75/11
• 20 mm mini brads; mini brads can be found at your local craft store, office supply store, or
online.
Isacord Thread Colors
As per thread chart
Match bobbin thread to top thread
No design requires more than one spool.
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved. 8
SUMMARY
Finished project size:
Approximately 8” x 8”
51247-01 51247-02 51247-03 51247-04 51247-05
Requires 1 Design Requires 1 Design Requires 1 Design Requires 1 Design Requires 1 Design
51247-06 51247-07 51247-08 51247-09 51247-10
Requires 1 Design Requires 1 Design Requires 1 Design Requires 1 Design Requires 1 Design
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved. 9
EMBROIDERY
Step 1
• The project includes freestanding applique designs and freestanding
lace designs. All applique designs are stitched the same as shown in the
instructions.
• All designs are stitched with matching thread in the top and bobbin.
• Hoop one piece of OESD AquaMesh and one piece of OESD
BadgeMaster in the hoop for all designs.
Step 2
• Prep the front and back applique fabrics with one layer of OESD StabilStick CutAway.
Step 3
• Stitch Machine Step 1, Front and Back Pink Fabric Placement Stitch.
• Shown here in red for instructional purposes. Follow color chart.
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved. 10EMBROIDERY
Step 4
• Remove the hoop from the machine, but NOT the project from the
hoop. Lay the hoop on a flat surface.
• Cut a piece of prepared fabric slightly larger than the placement line.
• Place the prepared fabric right side up, covering the placement line
completely. To secure, tape in place with OESD Expert Embroidery
Tape TearAway.
Step 5
• Turn the hoop over and place the back prepared applique fabric right
side up covering the placement stitch completely.
• To secure, carefully tape in place with OESD Expert Embroidery Tape
TearAway.
• Avoid pushing too hard on the stabilizer to prevent it from dislodging
from the hoop.
BACK OF HOOP
Step 6
• Return the hoop to the machine.
• Stitch Machine Step 2, Cut Line and Tackdown.
• Shown here in black for instructional purposes.
• Follow color chart, matching top and bobbin thread.
BACK OF HOOP
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved. 11EMBROIDERY
Step 7
• Remove the hoop from the machine, but NOT the project from the
hoop.
• Trim the excess fabric as close to the stitching as possible. If the
outermost stitches are cut, the inner stitches will hold the applique in
place.
Step 8
• Turn the hoop over and trim.
BACK OF HOOP
Step 9
• Return the hoop to the machine and stitch the remaining colors
according to the thread chart.
• Match the bobbin thread to the upper thread colors where indicated.
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved. 12EMBROIDERY
Step 10
• When design is complete, remove the project from the hoop and trim
the stabilizer 1/4”- 1/2” outside the design.
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved. 13ASSEMBLY
Step 1
• Rinse each piece in warm running water until the design is only slightly
sticky.
• Lay face down on a non-stick surface to dry. Parchment paper or a
cooling rack work well. This prevents the piece from curling.
Step 2
• With a dry iron press each piece, right side down, on a Perfect
Embroidery Press Cloth.
Step 3
• Use the Perfect Punch tool with the 3mm attachment, punch holes in
the eyelets indicated in the photo.
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved. 14ASSEMBLY
Step 4
• Push a brad through the top eyelet of the body from the front side, then lay flat face down.
BACK SIDE
Step 5
• Arrange the Top Left Wing 01 as shown face up to the right side of the body, with the eyelet on the long
end over the brad.
• Note: Since the body of the butterfly is face down, the left wings are attached to the right side and the
right wings are attached to the left side. The position of the wings (left or right) refer to their position on
the body from the front.
Step 6
• Fold the short end of the wing over, sliding the eyelet directly over the brad.
• Bend the brad points apart just enough to hold the wing in place.
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved. 15ASSEMBLY
Step 7
• Arrange the Top Right Wing 02 as shown face up to the left side of the body, with the eyelet on the long
end over the brad.
Step 8
• Fold the short end of the wing over, sliding the eyelet directly over the brad.
• Bend the brad points flat to the wings to secure.
Step 9
• Push a brad through the bottom eyelet of the body from the front side,
then lay flat face down.
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved. 16ASSEMBLY
Step 10
• Arrange the Bottom Left Wing 03 as shown face up to the right side of the body, with the eyelet on the
long end over the brad.
Step 11
• Fold the short end of the wing over, sliding the eyelet directly over the brad.
• Bend the brad points apart just enough to hold the wing in place.
Step 12
• Arrange the Bottom Right Wing 04 as shown face up on the left side of the body, with the eyelet on the
long end over the brad.
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved. 17ASSEMBLY
Step 13
• Fold the short end of the wing over, sliding the eyelet directly over the brad.
• Bend the brad points flat to the wings to secure.
Step 14
• The butterfly is complete. Enjoy!
Finishing Touches
• TIP: Use ribbon, yarn, or as seen here, a paper clip around the brad to hang the butterfly as desired.
It is a violation of Copyright law to make and distribute copies of electronic designs or artwork.
Electronic designs are licensed to the original purchaser for use at one location. ©2021 OESD, LLC. All rights reserved. 18INSTRUCTIONS
ATTENTION
When printing this document, any page scaling or page fitting options in your print
dialog box must be turned OFF or set to NONE so that your files will print out at
their actual size. Images not printed at actual size will not function as intended.
TO SAVE PAPER
Only print the desired image by navigating to the image’s page,
go to File > Print and select “Current page” in the print dialog
box. Repeat for each desired image.
19APPLIQUE PATTERNS
Print at 100%. No
scaling. This box
measures 1” x 1”.
Use the box as an
accuracy guide
when printing
templates.
20APPLIQUE PATTERNS
Print at 100%. No
scaling. This box
measures 1” x 1”.
Use the box as an
accuracy guide
when printing
templates.
21MIRRORED PATTERNS
Print at 100%. No
scaling. This box
measures 1” x 1”.
Use the box as an
accuracy guide
when printing
templates.
22MIRRORED PATTERNS
Print at 100%. No
scaling. This box
measures 1” x 1”.
Use the box as an
accuracy guide
when printing
templates.
23You can also read
